Commit graph

1401 commits

Author SHA1 Message Date
Nicolas Dufresne
d3c5fc815e v4l2codecs: Allow output caps to be updated
This change allow output caps to be updated even though we stay in
streaming state. This is needed so that any upstream updated to fields
like framerate, hdr data, etc. can result in a downstream caps event
being pushed.

Previously, any of these changes was being ignored and the downstream
caps would not reflect it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>
2022-11-16 13:12:38 +00:00
Seungha Yang
0e4c520cf3 nvdecoder: Handle input caps change
Update output caps if it's notified by baseclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>
2022-11-16 13:12:38 +00:00
Seungha Yang
b4c19a96b7 nvdecoder: Don't hold decoder output state
It's not referenced by this implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>
2022-11-16 13:12:38 +00:00
Seungha Yang
349f8de13e d3d11decoder: Handle input caps change
Update output caps if it's notified by baseclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3328>
2022-11-16 13:12:38 +00:00
Seungha Yang
9d30f9dd59 cudaconvertscale, cudascale: Add "add-borders" property and support 8bits RGB planar formats
Adding "add-borders" property which is identical to that of
videoscale and this will be enabled by default.
And adding RGBP/BGRP/GBR/GBRA format support.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
2022-11-15 16:25:44 +00:00
Seungha Yang
c11f8fa930 cuda: Rewrite colorspace/rescale object
Rewriting GstCudaConverter object, since the old implementation was not
well organized and it's hard to add new features.
Moreover, the conversion operations were not very optimized.

Major change of this implementation:
* Remove redundant intermediate conversion operations such as
  any RGB -> ARGB(64) conversion or any YUV -> Y444 (or 16bits Y444).
  That's not required most of cases. The only required case is
  converting 24bits (such as RGB/BGR) packed format to 32bits format
  because CUDA texture object does not support sampling 24bits format
* Use normalized sample fetching (i.e., [0, 1] range float value)
  and also normalized coordinates system for CUDA texture.
  It's consistent with the other graphics APIs such as Direct3D
  and OpenGL, that makes sampling operations much easier.
* Support a kind of viewport and adopt math for colorspace conversion
  from GstD3D11 implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
2022-11-15 16:25:44 +00:00
Seungha Yang
c1efa9ac4b cudaupload,cudadownload: Add support for planar 8bits RGB formats
Defines RGBP, BGRP, and GBR formats, which have the same memory
layout as already supported Y444. And defines GBRA format as well
which needs just one additional alpha plane

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
2022-11-15 16:25:44 +00:00
Seungha Yang
950dad201d cudaconvert, cudascale: Port to GstCudaBaseCovert baseclass
Don't need to hold duplicated code in the source tree

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
2022-11-15 16:25:44 +00:00
Seungha Yang
eb2ef5a4fd cuda: Add convertscale element
GstCudaConverter object can do colorspace conversion and scale at once.
Adding new element "cudaconvertscale" to do that, this can
save unnecessary GPU operation if colorspace conversion and
rescale is required for given input stream format.

Most of codes are taken from d3d11convert element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3389>
2022-11-15 16:25:44 +00:00
Seungha Yang
219c5cf330 meson: d3d11: Clarify the message for WGC support check
Even Windows10 SDK seems to have required symbols depending on installed
SDK version

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3376>
2022-11-11 19:42:19 +00:00
Seungha Yang
12a2c1dffe d3d11screencapturesrc: Fix build error with MSVC x86
Delete the code for now. Note that the code block is unnecessary already

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3375>
2022-11-11 18:58:54 +00:00
Colin Kinloch
99fc124f25 videocrop, videobox: Simplify navigation event handling and support touch events
Signed-off-by: Colin Kinloch <colin.kinloch@collabora.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3053>
2022-11-11 06:45:49 +00:00
Colin Kinloch
841f50f0d9 va: Fix vapostproc navigation event co-ordinate mapping
Signed-off-by: Colin Kinloch <colin.kinloch@collabora.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3053>
2022-11-11 06:45:49 +00:00
Colin Kinloch
d54e597278 va: Use gst_video_orientation_from_tag to parse orientation
Signed-off-by: Colin Kinloch <colin.kinloch@collabora.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3053>
2022-11-11 06:45:48 +00:00
Tong Wu
ef4fc11193 msdkvpp: delete the macros to make video memory work on Windows
Since gst_msdk_import_to_msdk_surface has been implemented for d3d11, we
delete the macros to make it work on Windows.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
7becf35221 msdkvpp: modify the way of copying system memory to msdk surface
Replace video_copy with memcpy to fix the issue when the sizes of the
src frame and dst frame don't match. Moreover, for Windows, you have to
do the copy first and call gst_msdk_import_to_msdk_surface later.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
9a6dd525f7 msdkvpp: add d3d11 support during negotiation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
a55808d299 msdkvpp: add d3d11 video memory to sink and src caps
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
78523c5130 msdkvpp: delete use_sinkpad_va and use_srcpad_va
This two variables are no longer useful. Delete them for now.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
f25f528120 msdkenc: modify the way of copying system memory to msdk surface
Replace video_copy with memcpy to fix the issue when the sizes of the
src frame and dst frame don't match. Moreover, for Windows, you have to
do the copy first and call gst_msdk_import_to_msdk_surface later.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
f6e207eb1b msdkallocator_d3d: add d3d11 video memory and import it to msdk surface
This patch introduces d3d11 texture and index to GstMsdkMemoryID and
implements gst_msdk_import_to_msdk_surface in order to wrap the surface
to mfxMemId.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
7f18f11a90 msdkallocator_d3d: implement GetHDL callback function
During encoding process, oneVPL runtime will call GetHDL callback function.
This patch implements this function for the use of msdk.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
86d22b2e38 msdkallocator: add a parameter to function gst_msdk_import_to_msdk_surface
Add a flags parameter to function gst_msdk_import_to_msdk_surface and
move the function declaration to gstmsdkallcator.h to prepare for adding
Windows implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
abe47f3fa0 msdkenc: add d3d11 pool during negotiation
This patch adds Windows specific set_format and propose_allocation
functions to enable creating d3d11 pools during negotiation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
c62deb6fe9 msdkenc: add D3D11 caps for msdkenc
This patch adds D3D11 feature to sink factory for msdkenc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
d61a248ac8 MSDK: Introduce d3d11 device to MSDK context
Currently MSDK context does not support d3d11va. Now introduce d3d11va
device to MSDK context, making it able to create msdk session with d3d11
device and to easily share with upstream and donwstream.

Add environment variable to enable user to choose GPU device in multi-GPU
environment. This variable is only valid when there's no context
returned by upstream or downstream. Otherwise it will use the device
that created by upstream or downstream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Tong Wu
11e13b189d MSDK: Add gst d3d11 lib into MSDK's dependency
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3231>
2022-11-11 06:02:28 +00:00
Víctor Manuel Jáquez Leal
eb0f90f6ec vafilter: Log out processed surfaces for debug.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3373>
2022-11-11 04:19:54 +00:00
Víctor Manuel Jáquez Leal
bc4aa017ac vadeinterlace, vapostproc: Drop output buffer if process failed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3373>
2022-11-11 04:19:54 +00:00
Seungha Yang
b36b9c7821 amfcodec: Fix typos
Fixing typo surfrace -> surface

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3378>
2022-11-09 23:02:21 +00:00
Seungha Yang
93b6cf7adb mfvideosrc: Return S_OK from ISampleGrabberCB callback
The Microsoft's ISampleGrabber implementation seems to be ignoring
the HRESULT return value from the callback though,
S_OK is the right HRESULT code.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3379>
2022-11-10 06:03:45 +09:00
Seungha Yang
99b83f33f7 d3d11screencapturesrc: Specify PAR 1/1 to template caps
... otherwise PAR can be wrongly signalled during the negotiation

Fixing below pipeline when desktop resolution is not 640x480
gst-launch-1.0.exe \
  d3d11screencapturesrc ! videoscale !
  video/x-raw,width=640,height=480,pixel-aspect-ratio=1/1 ! d3d11videosink

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3360>
2022-11-09 11:22:06 +00:00
Víctor Manuel Jáquez Leal
1f7cf1d408 va: caps: Fix raw caps for H264 encoding.
Mesa gallium and Intel i965 ill reports unsupported video formats.

This commit reverts ecb12a05 and adds a deeper workaround, since
ecb12a05 only fix the template caps, but not when renegotation
happens.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
2022-11-09 06:15:23 +01:00
Víctor Manuel Jáquez Leal
4994487b8f vabaseenc: Log out the flow error name.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
2022-11-09 06:15:23 +01:00
Víctor Manuel Jáquez Leal
dbf8c38667 vah264enc: Enable parameters change while running.
1. Removes the verification if the internal encoder is not opened
   yet to allow the property setting.

2. And toggles on the base class' reconf flag for each property
   variable that can be modified at run time.

3. Mark those modifiable properties as mutable while playing.

Currently the run-time modifiable properties are:

qpi, qpp, qpb, bitrate, target percentage, target usage and rate control

Other properties can be enabled too, but they need testing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
2022-11-09 06:15:21 +01:00
Víctor Manuel Jáquez Leal
bd3c50e50f vabaseenc: Enable encoder reconfiguration.
Adds an internal function reset() which drains the internal queues and
calls the reconfig() vmethod.

This reset() method is called inconditionally at set_format() and in
handle_frame() if the instance's reconf flag is enabled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
2022-11-09 06:13:26 +01:00
Víctor Manuel Jáquez Leal
351a107ecc vah264enc: Avoid reopen encoder or renegotiate.
If parameters remain similar enough to avoid either encoder reopening
or downstream renegotiation, avoid it.

This is going to be useful for dynamic parameters setting.

To check if the stream parameters changed, so the internal encoder has
to be closed and opened again, are required two steps:

1. If input caps, profile, chroma or rate control mode have changed.
2. If any of the calculated variables and element properties have
   changed.

Later on, only if the output caps also changed, the pipeline
is renegotiated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
2022-11-09 06:13:26 +01:00
Víctor Manuel Jáquez Leal
38f1a4ee3d vaencoder: Add gst_va_encoder_get_reconstruct_pool_config()
This method will return the caps configured in the reconstruct buffer
pool, and its maxium number of buffers to allocate.

The caps are needed later to know if the internal encoder has to be
reopened if the stream properties change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2466>
2022-11-09 06:13:25 +01:00
Seungha Yang
ded3e7c81a directshow: Demote rank of device provider to GST_RANK_NONE
Current directshow plugin seems to be unstable and unmaintained
for many many years.

See
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3323
and
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1828

Disable this device provider by default to avoid any side-effect
of this plugin

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3355>
2022-11-09 00:30:45 +00:00
Victor Manuel Jaquez Leal
bb86728a1a vah264enc: Fix properties documentation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3361>
2022-11-08 21:49:05 +00:00
Victor Manuel Jaquez Leal
c60504bd9e va: Document device-path property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3361>
2022-11-08 21:49:05 +00:00
Victor Manuel Jaquez Leal
0918910a7d vavp8dec, vampeg2dec: Fix type name.
The camel case name is wrong when registering the type.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3361>
2022-11-08 21:49:05 +00:00
Víctor Manuel Jáquez Leal
96a6b33029 vacaps: Sort raw caps according their efficiency.
Caps negotiations considers template caps order. This patch sets the
correct order according the feture caps: VAMemory, DMABuf and
SystemMemory.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3349>
2022-11-08 05:15:09 +00:00
Víctor Manuel Jáquez Leal
bbd2bce11d vabasetransform: Fail if cannot import the input buffer.
Otherwise got a buffer double free.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3348>
2022-11-07 17:57:05 +00:00
Seungha Yang
4b05736c63 mfvideosrc: Add support for DirectShow capture filter
Adding DirecShow video capture filter mode, in addition
to existing MediaFoundation and WinRT(UWP) mode, to support
DirectShow only filters (not KS driver compatible)
such as custom virtual camera filters.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3350>
2022-11-08 01:33:14 +09:00
Seungha Yang
0405e0cfc7 d3d11videosink: Always clear back buffer on resize
Swapchain may not need to be resized if the size of backbuffer
is equal to the previous size. Then previously rendered frame will be stay
on the screen. Do clear back buffer whenever resize() is called

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3341>
2022-11-05 17:23:24 +00:00
Seungha Yang
e1e9ee5506 qsv: Fix encoding error when input memory belongs to other GPU
Copy frame if VA display of input buffer is different from that
of encoder, like we've been doing on Windows

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3335>
2022-11-05 13:59:45 +00:00
He Junyan
1881d1826a va: baseenc: Do not import the VA surface from other display.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>
2022-11-05 13:39:34 +08:00
He Junyan
d51b29b1dc va: compositor: Do not use allocator and pool from other display.
Just like the va decoder, the compositor should not use allocator
and pool from other display. Also, when importing the input buffer,
if it is from other display, we should fallback to memory copy.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>
2022-11-05 13:39:34 +08:00
He Junyan
b9b211c1d1 va: basetransform: Do not use allocator and pool from other display.
Just like the va decoder, the vpp and deinterlace should not use allocator
and pool from other display. Also, when importing the input buffer, if it
is from other display, we should fallback to memory copy.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>
2022-11-05 13:39:34 +08:00
He Junyan
a8330686cb va: basedec: Do not use allocator and pool from other display.
The command line such as:
  gst-launch-1.0 -vf filesrc location=1.264 ! h264parse !
  vah264dec ! varenderD129postproc ! fakesink
The decoder here gets the allocation proposal from the vpp which is
on another GPU device. The allocator and pool belong to other display
and should not be used in the decoder.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1167
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3322>
2022-11-05 13:39:34 +08:00
Seungha Yang
4db4f08227 d3dvideosink: Update plugin description
Direct3D is too generic (there are various version numbers).
Clarify that this element is using the Direct3D9 API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3333>
2022-11-04 22:48:41 +00:00
Seungha Yang
bfed80a82c directshow: Validate enumerated AM_MEDIA_TYPE struct
The video info struct can be null if format is undefined

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3323>
2022-11-04 10:01:39 +00:00
Seungha Yang
f7cc753274 qsvjpegenc: Add support for YUY2 format
Now GstD3D11 defines YUY2 format

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3316>
2022-11-03 06:40:10 +09:00
Seungha Yang
1853dd56a4 qsv: Add JPEG decoder
Because DXVA does not define JPEG decoding, we need this
vendor specific API for Windows

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3316>
2022-11-03 06:40:10 +09:00
Tong Wu
60f7467dfe msdkcontext: use gst_object_unref instead of g_object_unref
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>
2022-11-02 07:40:59 +00:00
Tong Wu
bae66c8ae0 msdkcontext: use gst_object_ref for GstVaDisplay
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>
2022-11-02 07:40:59 +00:00
Tong Wu
c9cc92a20a msdkcontext: g_object_new() must not return nullptr
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>
2022-11-02 07:40:59 +00:00
Tong Wu
7b03da634b msdkenc: use GST_CAPS_FEATURE_MEMORY_VA to check the feature
Add macros to protect sinkpad_is_va(), since it is not defined on
Windows.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3301>
2022-11-02 07:40:59 +00:00
Eric Knapp
87e9952b8f vah264enc: Added option to insert CEA-708 closed captions
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2910>
2022-11-01 23:22:03 +00:00
Seungha Yang
be1771126d qsv: Check 16K resolution support
... and remove duplicated code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3310>
2022-11-01 17:23:52 +00:00
Seungha Yang
92e03ba869 d3d11decoder: Fix for VP9 decoding with odd resolution
Fixing off by one mismatch when width and/or height of stream
is odd number

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3302>
2022-10-31 20:45:25 +00:00
Seungha Yang
5e66dde1b2 qsv: Add VP9 decoder
Recent Intel GPU supports 12bits VP9 decoding but only VP9
profile2 with 10bits is defined by DXVA spec.
Thus, we need this vendor specific decoder element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3290>
2022-10-31 19:30:47 +00:00
Seungha Yang
d8bdd9429b d3d11vp9dec: Disallow Profile2 12bits stream
Since DXVA does not support the format, specify bit-depth field
to sinkpad template caps so that d3d11vp9dec can be skipped
during autoplugging

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3297>
2022-10-31 11:29:39 +00:00
Víctor Manuel Jáquez Leal
96f0521155 vaencoder: Reset attribute index to one.
Further fix to 4ffb3663 where I forgot to reset the attribute index.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3285>
2022-10-27 20:32:15 +00:00
He Junyan
c294ba82e6 h264bitwriter: Correct the all API to byte aligned.
In fact, all the h264 bit writer have byte aligned output except
the slice header. So we change the API from bit size in unit to
byte size, which is easy to use. For slice header, we add a extra
"trail_bits_num" to return the unaligned bits number.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3193>
2022-10-27 12:15:43 +00:00
Mengkejiergeli Ba
13be7cbe86 msdkvpp: Set va mem caps as higher priority
We use va pool as msdkvpp's bufferpool, which means both va memory
and dma memory will be allocated by va pool. Considering drm modifier
stuff is not ready, we use va memory with higher priortiry than
dma memory when deciding vpp caps.

Besides, this patch removes the specified "interlace-mode" in vpp caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3253>
2022-10-27 11:12:08 +00:00
Mengkejiergeli Ba
c989d023fd msdkav1enc: Remove reorder TU workaround
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3225>
2022-10-27 07:07:38 +00:00
Mengkejiergeli Ba
78a7c6318a msdkav1enc: Remove pts workaround
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3225>
2022-10-27 07:07:38 +00:00
Mengkejiergeli Ba
2c1315cae9 msdkvpp: Fix upper frc
Refact vpp commit 4c6b719445 broke the
upper FRC, here to fix this by using outbuf_new.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3223>
2022-10-27 05:17:12 +00:00
Mengkejiergeli Ba
27216d6f2e bad: Add msdkav1enc docs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2971>
2022-10-27 04:02:10 +00:00
Ignacio Casal Quinteiro
d44eb4b2fa avfdeviceprovider: do not leak the properties
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3268>
2022-10-26 10:29:25 +00:00
Víctor Manuel Jáquez Leal
ba24191f2a vaencoder: Fix caps semantics.
When using gst_va_caps_from_profiles() the semantics of sink/src caps
depends if the element is an encoder or a decoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Víctor Manuel Jáquez Leal
d32fdf975d va: Fix typos.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Víctor Manuel Jáquez Leal
4ffb3663a8 vah264enc: Fail if unsupported rate control.
Handle when encoder doesn't support rate control, which is set as
VA_RC_NONE, and if the set rate control mode is not supported by the
GStreamer element, the element configuration fails.

Also it logs out max and target bitrate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Víctor Manuel Jáquez Leal
5e531c1a88 vah264enc: Add todo item.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Víctor Manuel Jáquez Leal
d463feaa08 vaencoder: Honor entrypoint at constructor.
The entrypoint is set when the encoder helper is constructed,
nonetheless it was also passed as parameter when opening. That's
buggy.

In order to simplify the code, the entrypoint at construction is
honored.

But gst_va_encoder_has_profile_and_entrypoint() now doesn't rely in
the internal list of profiles since it only contains those that
belongs to codec and entrypoint, thus it queries directly the VA
driver.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Víctor Manuel Jáquez Leal
79c47fbdb8 vabaseenc: Scope error bail out.
Though this is not enforced by the GStreamer code style, it's clearer
to add a nested scope for error handling using label/goto.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Víctor Manuel Jáquez Leal
d608872ba3 vabaseenc: Use class entrypoint.
Add a macro to access to class entrypoint and use it instead of move
it to a variable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3063>
2022-10-26 08:19:32 +00:00
Seungha Yang
722f097b9d nvcodec: Update for documentation
* Use GST_PARAM_DOC_SHOW_DEFAULT flags for GPU ID related
  properties
* Fix some typos
* Add since markers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
7ce3fccf25 mediafoundation: Update for documentation
* Use GST_PARAM_DOC_SHOW_DEFAULT flags for GPU ID related
  properties
* Add doc caps
* Add since markers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
9d926ae8b1 mfvideoencoder: Document only hardware encoders
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
e9415aafb5 mfvideoencoder: Fix device enumeration
Although a GPU does not support the codec, the other GPU might
be able to support the codec

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
d92c43cb0f amfcodec: Update for documentation
* Use GST_PARAM_DOC_SHOW_DEFAULT flags for GPU ID related
  properties
* Add doc caps

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
4038a486a0 qsv: Use GST_PARAM_DOC_SHOW_DEFAULT flag
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
6974b6f6ff d3d11: Update for documentation
* Use GST_PARAM_DOC_SHOW_DEFAULT flags for GPU ID related
  properties
* Add doc caps
* Increase deinterlace max resolution

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
31be056b6e d3d11: Run indent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
1ec4905e92 wic: Add since marker
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
92fd435a25 directshow: Add since marker
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3250>
2022-10-24 12:42:51 +00:00
Seungha Yang
23261bccbb qsv: Enable MinGW toolchain support
Use PCRE regex method to work around (likely) GCC std::regex bug,
and enable building for non-MSVC

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3239>
2022-10-24 10:53:40 +00:00
Seungha Yang
426535f3a6 d3d11screencapture: Add WinRT API based capture mode
Add Windows Graphics Capture (WGC) API based screen capture mode.
The conditions where this mode is used:
* Explicitly requested by user (capture-api property)
* To capture specific window
* When DXGI desktop duplication API does not work on hybrid graphics systems
  (e.g., multi-gpu laptop)

Full features of this implementation require Windows 11. And Windows 11
SDK is required to build this feature.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3144>
2022-10-21 14:21:28 +00:00
Seungha Yang
087e335006 d3d11screencapture: Subclassing capture implementation
Preparation to use WinRT capture API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3144>
2022-10-21 14:21:28 +00:00
Seungha Yang
dcd3f210a0 qsv: Add plugin doc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2738>
2022-10-21 21:29:25 +09:00
Seungha Yang
2b3f690355 qsv: Update SDK version to v2022.2.4
See release note
https://github.com/oneapi-src/oneVPL/releases/tag/v2022.2.0

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2738>
2022-10-21 21:29:25 +09:00
Seungha Yang
573a0489f6 d3d11videosink: Add "emit-present" property
Controls the decision for "present" signal use, and
allows delayed "present" signal handler install via the property

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3176>
2022-10-18 21:19:01 +00:00
Seungha Yang
cb7958e710 wasapi2: Add support for process loopback capture
Adding loopback capture mode for specified PID.

Note that this feature requires Windows 10 build 20348
(Windows 11/Windows Server 2022 or later),
and any process loopback related properties will not be exposed
if OS does not support it.

Example launch lines:
* wasapi2src loopback-mode=include-process-tree loopback-target-pid=<PID>
 Captures audio generated by an application (specified by PID)
 and its child process
* wasapi2src loopback-mode=exclude-process-tree loopback-target-pid=<PID>
 Captures desktop audio excluding PID and its child process

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1278
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3195>
2022-10-17 23:28:48 +00:00
Piotr Brzeziński
1e70525bc9 avfvideosrc: Allow specifying crop coordinates during screen capture
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3153>
2022-10-12 21:19:31 +00:00
Wojciech Kapsa
b618ff3369 decklink: reset calculation of gst_decklink_video_src_update_time_mapping on no_signal. When the HDMI cable was disconnected for a long time, the calculation took too much time. SDI cable works fine.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3132>
2022-10-10 08:13:30 +00:00
Wojciech Kapsa
505f48f237 decklink: Add new persistent-id property and sort devices by persistent ID
The order of the devices iterator from the SDK is undefined and can
randomly change.

Keep the device-number property for backwards compatibility and
simplicity but prefer the persistent-id property and also use it for the
device provider implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3078>
2022-10-06 15:50:11 +00:00
Stéphane Cerveau
fb09c028e3 h265parse: fix typo in member of GstH265SPS
Rename sps_extnsion_params to sps_extension_params

Fix comment about vui_parameters_present_flag

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3072>
2022-10-04 10:01:12 +00:00
Christopher Obbard
0c83ddcdf7 v4l2codecs: Warn user when no media devices are found
Currently if the user is not able to access the devices under /dev/media*,
either due to no media devices present on the system or simply no permission
to access the device, v4l2codecs initialises with no features or debug messages.

Since calling `GST_DEBUG="v4l2*:7" gst-inspect-1.0 v4l2codecs` is a typical way
to diagnose why element(s) failed to enumerate, we should be more verbose here
when the user is not able to access any /dev/media* device. So print a simple
debug message in this case to aid debugging.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3088>
2022-09-29 19:12:14 +00:00
Víctor Manuel Jáquez Leal
f9371ccc38 vabaseenc: Move out encoder validation from assertion.
Assertion can be disabled at compilation time. Still it's important to
validate it the encoder object was opened by the subclass. This patch
removes the assertion and returns if the encoder is open.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3051>
2022-09-20 18:59:18 +00:00
Mengkejiergeli Ba
03a24de4cb msdkav1enc: We should not set other alignment here
According to spec, we have 32bit alignment for height (progressive) and
16bit alignment for width, so here we don't need to add other alignment
settings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3050>
2022-09-20 16:25:15 +08:00
He Junyan
cf2581953b va: h264enc: Fix rate control enum register failure for the second GPU.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3041>
2022-09-19 09:24:36 +00:00
Víctor Manuel Jáquez Leal
a8387fdc6b vah264enc: Avoid precision lost by just rounding up.
The code where dividing by 16 and later multiplying by 16, which is
spurious and a potential loose of precision.
2022-09-17 10:14:40 +02:00
Víctor Manuel Jáquez Leal
69c75f9827 vah264enc: Update AUD property if driver can't handle raw data. 2022-09-17 10:10:19 +02:00
Víctor Manuel Jáquez Leal
42861617d5 vah264enc: Remove unused dispose method. 2022-09-17 10:04:51 +02:00
Eric Knapp
f720a5dd66 vadeinterlace: Fix passthrough latency query
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3038>
2022-09-17 05:47:41 +00:00
Seungha Yang
b6ca76eb68 nvh265sldec: Sync up with d3d11h265dec implementation
Each RefPicSetStCurrBefore/RefPicSetStCurrAfter/RefPicSetLtCurr array
might have empty element (i.e., reference pictures might not be stored
sequentially). Don't error out for the empty element case,
but instead, iterates each array and fill NVDEC's reference list
as much as possible

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1441
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3039>
2022-09-16 20:25:23 +00:00
Víctor Manuel Jáquez Leal
f4260ecdc5 va: baseenc: Fix gobject style for chained method.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3035>
2022-09-16 19:10:12 +00:00
He Junyan
9a991cfe9e va: av1dec: user internal buffer pool for non output layers.
The AV1 support multi spatial layers within one TU with different
resolutions, and only the highest spatial layer need to be output.
For example, there are two spatial layer, base level is 800x600
and higher level is 1920x1080. We need to decode both because the
higher level needs base layer as reference, but we only need to output
1920x1080 frames here.

The current manner always renegotiates the caps once we detect the
current picture resolution changes, so we renegotiate again and
again between different layers. That's a big waste and has very
low performance. We now only do the renegotiation for the highest
output layer. For other non output layers, we just keep a internal
buffer pool which is big enough to handle the surface allocation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2382>
2022-09-16 09:45:00 +00:00
Thibault Saunier
339e5916c6 Build documentation for rust plugins
- Update the docker image we use, starting using the standard one adding
  `gtk4-doc` as required by rust plugins
- Update the plugins_doc_caches as required, some more plugins are built
  with the new image
- Install ninja from pip as the version from F31 is too old
- Avoid buildings all GSreamer plugins when building the doc as it takes
  time and resources for no good reason
- Stop linking to `GInstanceInitFunc` as it is not present in latest GLib
  documentation, leading to warnings in hotdoc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2954>
2022-09-15 20:11:47 +00:00
Seungha Yang
c91d72e677 nvdec: Fix for HEVC decoding when coded resolution is larger than display resolution
As documented in the SDK header, we should set coded width/height
values to the corresponding decoder configuration option,
instead of display resolution

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1438
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3022>
2022-09-14 05:59:20 +09:00
Seungha Yang
ca47012a55 cudaupload,cudadownload: Fix document
* Fix typo, NVIDA -> NVIDIA
* Add cudadownload doc to the source file

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3018>
2022-09-13 16:40:51 +00:00
Seungha Yang
7ea3c55549 cudaupload,cudadownload: Use shared GstD3D11Device context if possible
Handle d3d11 device context in set_context() method with
additional device compatibility check so that only NVIDIA GPU
associated d3d11 device can be configured in the element.
And clear old d3d11 device per set_info() for d3d11 device to be
updated as well.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3018>
2022-09-13 16:40:51 +00:00
Víctor Manuel Jáquez Leal
e4f6ade308 va: Complete library and plugin documentation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1025>
2022-09-13 14:57:21 +02:00
Víctor Manuel Jáquez Leal
a51ac72b5e va: Move gstvavideoformat out of library headers.
Since it's no needed for API consumers. Though it can be added later.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1025>
2022-09-13 14:57:21 +02:00
Víctor Manuel Jáquez Leal
1c69fe3fc8 vajpegdec: Enhance explanation comment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2948>
2022-09-07 05:57:40 +00:00
Víctor Manuel Jáquez Leal
230e1e6bb4 va: caps: Use G_STMT_START / END
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2948>
2022-09-07 05:57:40 +00:00
Víctor Manuel Jáquez Leal
44fe871534 vajpegdec: Check if driver has internal color conversion.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2948>
2022-09-07 05:57:40 +00:00
Florian Zwoch
a1b60be22b va: Fix log message when registering H264 encoder.
The log message would report an error for the H264 decoder when
registering failed, but we tried to register the H264 encoder instead.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2974>
2022-09-02 10:29:11 +00:00
Mengkejiergeli Ba
da9479a034 msdkvpp: Add va memory when fixating src caps
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
bb79853d20 msdkvpp : Use va pool at linux path and system pool for windows
We use msdkvpp's own pool to allocate buffers instead of external frame
allocator mfxFrameAllocator.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
4c6b719445 msdkvpp: Import buffer to msdk_surface
If the buffer is not msdk_buffer, we can try to directly import the
attached memory (i.e. va mem and dmabuf mem) by applying the common
uitl function: import_to_msdk_function ().

Here add a flag "from_qdata" in GstMsdkSurface to handle the cropping case,
we should avoid updating the crop values when msdk_surface is from the
memory's qdata, because the crop info from this surface is the already
updated one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
45819899c3 msdkvpp: Add va caps at sink and src pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
966a2c3754 msdkenc: Apply common util func to import mem as msdk_surface
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
2854af85fd msdk: Add help functions to get mfxFrameSurface1 from GstBuffer and wrap it as GstMsdkSurface
Note that the memory abstraction for system memory is for windows path.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
23f5bdcee7 msdkenc: Use va pool on linux and system pool for windows
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
956dc40fb8 msdkenc: Directly import dmabuf memory as mfx surface
When input buffer is of dmabuf memory but not a msdk buffer (i.e., the
allocator is not msdk_allocator), then we can try to get fd of this mem,
create the corresponding va surface and wrap it as mfx surface.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
b2e18f7f88 msdkenc: Directly import va memory as mfx surface
If input buffer is of va memory, we can directly obtain va surface from
the buffer and wrap it as mfx surface.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Mengkejiergeli Ba
a8c1cec051 msdk: Use va libs API to get VA surface from buffer
Direct apply gst_va_buffer_get_surface to get VASurface from a buffer,
so remove corresponding functions which are not used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
2022-09-02 11:06:29 +08:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Seungha Yang
c3cf9521a5 d3d11: Update library doc
* Private header name is changed to gstd3d11-private.h to follow
  naming convention
* Add Since mark everywhere
* Update member variable names to be consistent with the other
  object implementations in this library
* Correct outdated documentation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2945>
2022-08-27 22:40:34 +09:00
Piotr Brzeziński
0d72a6209c avfvideosrc: Fix wrong default framerate value
Current default G_MAXINT is not a correct value under any circumstances.
This creates an issue with screen capture, during which we currently do
not get any framerate info causing G_MAXINT to show up, where elements
downstream can possibly misbehave - for example, `vtenc` causes
a kernel panic.
Replace with 30/1 to avoid such scenarios.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2944>
2022-08-25 14:24:57 +00:00
He Junyan
67eb1223c0 jpegdecoder: return the real error of decode_scan and decode_frame.
The current handle_frame() does not return the real error that happens
in decode_scan and decode_frame, which makes the pipeline continue with
the error and may trigger asserting later.

We also return the error when decode_quant_table or decode_huffman_table
fails.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2938>
2022-08-25 17:42:55 +08:00
Seungha Yang
0a65aaa6d2 d3d11videosink: Add display-format property
Make swapchian's display format configurable, since some DXGI formats
we can use for swapchain are not API interop compatible.
For instance, BGRA format should be used for Direct2D interop.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2923>
2022-08-24 17:44:49 +00:00
Seungha Yang
470436d7e6 d3d11videosink: Add present signal
The "present" signal will be emitted just before the
IDXGISwapChain::Present() call. The client can perform additional
GPU operation with given GstD3D11Device object and
ID3D11RenderTargetView handle. Or, the client can read back
the scene to be displayed on window using the signal.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2923>
2022-08-24 17:44:49 +00:00
He Junyan
42838c3b9e va: h265dec: Enable the scc_main_4:4:4_10 profile.
We should enable this profile which is already allown in vaprofile.c
after libva 1.8 version.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2909>
2022-08-19 00:50:53 +00:00
U. Artie Eoff
135edee484 kmssink: add fd property
This allows an application to provide their own opened DRM device
fd handle to kmssink.  For example, an application can lease
multiple fd's from a DRM master to display on different CRTC
outputs at the same time with multiple kmssink instances.

Specifying the fd property is not allowed when driver-name
and/or bus-id properties are specified.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2807>
2022-08-18 18:31:59 +00:00
Seungha Yang
7bcfccd0bd d3d11: Use CRITICAL_SECTION instead of GRecMutex
The GRecMutex abstraction (and heap allocation happens in GLib)
is unnecessary for this plugin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2914>
2022-08-18 17:48:57 +00:00
Seungha Yang
75e8f80999 cuda: Hide runtime compiler related header and symbols
That's already abstracted via gst_cuda_nvrtc_compile() method
and therefore, we do not need to expose such symbols yet.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2884>
2022-08-18 05:20:08 +09:00
Víctor Manuel Jáquez Leal
b10fc4d8db vajpegdec: Fix memory leak.
Free value content.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2899>
2022-08-17 18:34:10 +00:00
Víctor Manuel Jáquez Leal
a075e57c61 vajpegdec: Fix 4:2:2 for i965.
Since i965 uses NV12 either for 4:2:0 and 4:2:2 chroma (using an
internal color conversion) the chroma validation has to be shortcut.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2899>
2022-08-17 18:34:10 +00:00
Víctor Manuel Jáquez Leal
4dd6728ed5 va: Validate JPEG subsampling configurations.
There are Mesa Gallium drivers that report subsampling but without
any pixel format. So, strip out these subsamplings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2899>
2022-08-17 18:34:10 +00:00
Víctor Manuel Jáquez Leal
0446e35a14 va: gst_va_create_raw_caps_from_config() may return NULL.
This patch verifies if the function returns NULL in the caller.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2899>
2022-08-17 18:34:10 +00:00
Eric Knapp
45408db258 decklink: Validate video input format
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2892>
2022-08-17 13:29:55 -04:00
Eric Knapp
0c42c4801c decklink: Auto-detect 10-bit YUV
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2892>
2022-08-17 13:29:55 -04:00
Seungha Yang
df64226e71 d3d11decoder: Do timer based DecoderBeginFrame retry
... instead of retry count based one, because the precision of Sleep()
varies depending on system and application configuration.
Also, don't retry DecoderBeginFrame if decoder is doing flush.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2886>
2022-08-15 19:16:16 +00:00
Seungha Yang
812bb14f28 cudaupload,cudadownload: Don't simplify caps in transform_caps
The simplified caps might not be a subset of filter caps
and basetransform will complain about it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2883>
2022-08-15 18:44:14 +00:00
Seungha Yang
9b4fafb882 d3d11decoder: Do not use miniobject qdata
The miniobject qdata uses global mutex.
Use ID3D11DeviceChild::{Set,Get}PrivateData methods instead.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2885>
2022-08-15 02:50:18 +09:00
Corentin Damman
0d07ff60c9 d3d11window: fix DXGI_SWAP_CHAIN_FLAG_ALLOW_TEARING swap chain flag for full screen
Fixes #1372 (regression introduced in 5eeec165)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2866>
2022-08-12 09:35:40 +00:00
Corentin Damman
0d5d94aabd nvcodec: fix caps leaks in nvh264/h265encoder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2850>
2022-08-10 12:24:37 +00:00
Víctor Manuel Jáquez Leal
ad15fc9169 vah264enc: Set codec frame sync point if IDR
This flag is used by GstVideoEncoder base class for certain configurations.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2852>
2022-08-10 08:00:18 +00:00
Víctor Manuel Jáquez Leal
c4706ed219 vah264enc: Packed headers can be zero.
A driver can report back no packed header support (VA_ENC_PACKED_HEADER_NONE).
This patch removes that false verification.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2851>
2022-08-10 04:31:27 +00:00
Seungha Yang
05dae94352 d3d11: Use WIN32 API directly for locking with RAII pattern
Such abstraction is unnecessary for this library/plugin.
Use WIN32 API directly instead of GLib wrappers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2848>
2022-08-08 20:13:51 +00:00
Víctor Manuel Jáquez Leal
ecb12a05b8 vah264enc: Fix caps for mesa gallium.
Radeon mesa gallium driver has a bug which adds P010_10LE sink caps
format. This patch removes formats which arent 420 chroma.

gst_caps_set_format_array() wasn't used because the fix traverse
several structures with potential different formats.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2844>
2022-08-08 17:47:56 +00:00
Víctor Manuel Jáquez Leal
8c59ee29c2 vah264dec: Complete profiles in decoder.
Instead of specifying all the H.264 "supported" profiles in the global
hash table (used either by decoders and encoders), just complete them
in the decoder only, since the encoder doesn't support them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2844>
2022-08-08 17:47:56 +00:00
Seungha Yang
66d504ee58 d3d11: Don't find global default allocator
We were using global default allocator already. Pass null
allocator object to *_alloc() methods then the method will
use default allocator.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2843>
2022-08-06 23:55:18 +09:00
Seungha Yang
74f56632c3 d3d11: Use std::call_once()
g_once_init_enter() always takes global mutex for non-GCC build.
Use C++ once call implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2843>
2022-08-06 23:27:23 +09:00
Víctor Manuel Jáquez Leal
67ce55f33e vah264enc: Lock properties read/write.
This is a first step for changing properties at runtime.

And add missing bitrate upate and notification.

Fixes: #1258
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2836>
2022-08-04 14:26:00 +00:00
Víctor Manuel Jáquez Leal
cc9d69cb66 vah264enc: Use guint32 for rc_ctrl as it's for rc_ctrl_mode.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2836>
2022-08-04 14:26:00 +00:00
Víctor Manuel Jáquez Leal
7e95a8fc92 vah264enc: Split aud property and its usage.
Just as other property variables, it's split for ease it usage,
particularly after adding access locks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2836>
2022-08-04 14:26:00 +00:00
Víctor Manuel Jáquez Leal
c9f2108b43 va: baseenc: Untabbify and format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2836>
2022-08-04 14:26:00 +00:00
Seungha Yang
b8010e41a1 d3d11compositor: Add gamma-mode and primaries-mode properties
Allows controlling gamma remap and/or chromatic adaptation behavior.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2831>
2022-08-04 03:19:42 +09:00
Seungha Yang
f89cb98495 d3d11videosink: Add gamma-mode and primaries-mode properties
Allows controlling gamma remap and/or chromatic adaptation behavior.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2831>
2022-08-04 02:48:57 +09:00
Seungha Yang
0ac7077d2d d3d11convert: Add gamma-mode and primaries-mode properties
Allows controlling gamma remap and/or chromatic adaptation behavior.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2831>
2022-08-04 02:48:57 +09:00
Víctor Manuel Jáquez Leal
ce7070bf5b vapostproc: Check for colorimetry changes.
It uses what's merged in
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2777>
2022-08-02 17:39:24 +00:00
Seungha Yang
bc065d2cc2 d3d11videosink: Translate mouse position
Converts mouse cursor position represented in display coordinates to
stream coordinates.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2824>
2022-08-02 14:24:22 +00:00
Seungha Yang
7d4a1a5beb d3d11videosink: Early terminate mouse/keyboard event handling
... and add missing null check (plus coding style fix)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2824>
2022-08-02 14:24:22 +00:00
Nirbheek Chauhan
b2d22c0f00 meson: Don't pass -Werror to vendored code
Do it the correct way with libusrsctp -- override the option so that
it's done in a compiler-agnostic and future-proof way.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
2022-07-30 11:27:12 +00:00
Seungha Yang
8fee6bf785 wasapi2: Fix initial mute/volume setting
Fix up volume/mute change flag setting

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2809>
2022-07-29 02:37:29 +09:00
Eric Knapp
d11a0d04ec va: h264enc: Make AUD the first NAL unit
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2796>
2022-07-27 06:46:21 +00:00
Seungha Yang
cf94045dbf qsvencoder: Add support for D3D11 shared texture
Although input texture belongs to the other d3d11 device,
we can do GPU copy when its physical device is identical.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2790>
2022-07-23 16:53:14 +00:00
Seungha Yang
6fff608f27 d3d11: Port to GstD3D11Fence
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2790>
2022-07-23 16:53:14 +00:00
Nicolas Dufresne
316b182a86 v4l2codecs: h264: Reset the number of slices on picture start
This way, if we aborted a frame in the middle, we don't endup thinking
there is multiple slices to send.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:03 -04:00
Nicolas Dufresne
c2144ec586 v4l2codecs: h264: Fix initialization of the slice array
The function g_array_sized_new() leaves the len to 0, but the slice
implementation assumes it would be set to 4. Sending multiple slices is
not yet support for H.264 as no driver needed it yet, but if that code
was to be used it would have overflowed as the array would never grow as
multiple 0 by 2 always results in 0.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:03 -04:00
Nicolas Dufresne
a707d984ae v4l2codecs: h264: Rename count variable to num_controls
This is the counter for the used control slot. The term num_controls was
introduced in the HEVC decoder and felt like a better choice.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:02 -04:00
Nicolas Dufresne
a2b219c7e1 v4l2codecs: hevc: Add an API check
This adds an API check and bump recommended base kernel version to 5.20.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:02 -04:00
Benjamin Gaignard
0eb7028570 v4l2codecs: Add v4l2 stateless H265 decoder
Add v4l2 stateless H265 decoder.

Co-authored-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Co-authored-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:02 -04:00
Benjamin Gaignard
70941696ed v4l2codecs: Increase minimum payload size
Fluster MAXBINS_{A-C}_TI_5 HEVC tests files require to store
a payload larger than usual given their resolutions.
Increase the minimum payload size to handle them correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:02 -04:00
Nicolas Dufresne
f1c98e2c9e v4l2codecs: Align v4l2 headers with HEVC final uAPI
HEVC uAPI have landed for kernel 5.10.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
2022-07-22 10:21:02 -04:00
Seungha Yang
ac6577e2a9 d3d11compositor: Add support for crop meta
GstD3D11Converter supports cropping already. Cropping is just
a matter of setting source rectangle area to converter,
from d3d11 point of view

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2782>
2022-07-22 05:07:23 +09:00
Seungha Yang
1c3fac818d d3d11: Move GstD3D11Converter to gst-libs
The object is equivalent to GstVideoConverter but for D3D11.
Application can use this object directly for various conversions,
such as color space conversion, rescale, crop and flip/rotation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2767>
2022-07-22 00:08:51 +09:00
Fan F He
6fe35ad59d msdkenc: Enable LowDelayBrc and MaxFrameSize for I/P frame
Enable these features for accurate bitrate control.
Feature introduction of LowDelayBRC, MaxFrameSizeI and MaxFrameSizeP could be found here:
https://github.com/Intel-Media-SDK/MediaSDK/blob/master/doc/mediasdk-man.md

Signed-off-by: Fan F He <fan.f.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2742>
2022-07-20 07:10:19 +00:00
Seungha Yang
ee289a65ce d3d11converter: Use GstStructure to set initialization options
Runtime updatable options are exposed via object properties
but there are a few options which should be known at initialization
time. Use GstStructure to signal it and to be easily extensible

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2776>
2022-07-20 07:05:51 +09:00
Seungha Yang
d3d8820359 d3d11converter: Use primaries and transfer function compare methods
Different enum values could be functionally equal, then we don't need
to do full conversion.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2776>
2022-07-20 07:05:51 +09:00
Seungha Yang
16f4567a50 d3d11format: Move DXGI color space mapping method to gst-libs
Expose color space mapping method to public so that application
can configure GstCaps or GstVideoInfo using DXGI color space

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2776>
2022-07-20 07:05:46 +09:00
Seungha Yang
687f9feac6 d3d11convert: Use new colorimetry compare function
Avoid conversion if both are functionally identical

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765>
2022-07-18 08:56:45 +00:00
Seungha Yang
35994eb5c9 d3d11testsrc: Fix SMPTE pattern rendering
It was wrong vertex shader code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2766>
2022-07-17 23:59:04 +09:00
Piotr Brzeziński
6bf15124e7 applemedia: Add HEVC support to vtenc and vtdec
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2754>
2022-07-16 05:20:56 +00:00
Seungha Yang
1dd29a2564 d3d11: Move HLSL compiler to gst-libs
We should move this functionality to gst-libs so that GstD3D11Converter
can be moved to gst-libs.
Another advantage is that applications can call our
HLSL compiler wrapper method without any worry about OS version
dependent system installed HLSL library.
Note that there are multiple HLSL compiler library versions
on Windows and system installed one would be OS version dependent.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2760>
2022-07-15 06:31:51 +09:00
He Junyan
8e2bbfed13 va: baseenc: Do not use codec frame structure again after finish_frame().
In _push_out_one_buffer(), we use codec frame structure again for error handling
after we already call finish_frame(), which is a latent segment fault.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2739>
2022-07-11 10:12:29 +00:00
He Junyan
27c33f0161 va: baseenc: Do not clear the codec frame twice when error.
The current manner will clear the input codec frame twice if we fail
to push the output data, which will trigger an assert.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2739>
2022-07-11 10:12:29 +00:00
Seungha Yang
b09ca8635f d3d11: Use scoped device lock
Make code simpler and more deadlock-free

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2728>
2022-07-09 03:36:17 +09:00
Seungha Yang
02c2485468 qsvencoder: Fix for latency report when B-frame is enabled
QSV runtime will introduce additional delay when B-frame is enabled

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2730>
2022-07-08 13:24:12 +00:00
Seungha Yang
4f90e9b561 qsvencoder: Do not query again if previous call succeeded
Don't need to query multiple times

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2730>
2022-07-08 13:24:12 +00:00
Seungha Yang
6cc6494287 d3d11screencapturesrc: Set colorimetry to caps
Make use of reported DXGI colorspace if possible

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2729>
2022-07-08 21:05:25 +09:00
Seungha Yang
2476678b3c d3d11: Update colorspace map
Map DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709 to sRGB colorimetry

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2729>
2022-07-08 20:15:28 +09:00
Seungha Yang
59d92ea62c d3d11: Add an utility method for DXGI colorspace conversion
Add a method for DXGI_COLOR_SPACE_TYPE -> GstVideoColorimetry conversion

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2729>
2022-07-08 20:03:06 +09:00
Seungha Yang
e0d1b98827 d3d11converter: Remove convert() method
Expose only single convert_buffer() method. It's safer approach than
passing arbitrary list of SRV/RTV pointers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2713>
2022-07-04 18:46:51 +00:00
Seungha Yang
df396b9acd d3d11testsrc: Use convert_buffer() method
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2713>
2022-07-04 18:46:51 +00:00
Seungha Yang
7a48843ca6 d3d11: Remove video processor
Processing using ID3D11VideoProcessor was integrated into
GstD3D11Converter and GstD3D11VideoProcessor implementation is
not used anymore.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2713>
2022-07-04 18:46:51 +00:00
Seungha Yang
347ad181be d3d11memory: Update alloc_wrapped() API to avoid staging texture alloc
Add size parameter and use it for CPU accessible memory size
instead of allocating staging texture per API call.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2713>
2022-07-04 18:46:51 +00:00
Ignazio Pillai
76dbe45b83 wasapi: Implement default audio channel mask
Some multichannel capture devices does not provide a channel mask value
which will result in a pipeline failure due to the empty channel mask.

Implemented the same fix used for wasapi2

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1204

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2692>
2022-07-04 08:56:15 +00:00
Seungha Yang
5f39388ae5 d3d11videosink: Add support for rotation
Adding "rotate-method" property

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1396
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2708>
2022-07-02 20:40:37 +00:00
Seungha Yang
4e75ca0351 d3d11videosink: Protect window with lock at every place
Access to the object should be thread safe to support runtime
property update

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2708>
2022-07-02 20:40:37 +00:00
Seungha Yang
60e6be7068 d3d11convert: Add support for GstVideoOrientationMethod
Add flip/rotation support via GstVideoDirectionInterface

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2708>
2022-07-02 20:40:37 +00:00
Seungha Yang
f549575ce8 d3d11converter: Add support for GstVideoOrientationMethod
Shader can handle rotation/flip with other conversions
at once in a single pipeline, and depending on device
capability, videoprocessor may support it too.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2708>
2022-07-02 20:40:37 +00:00
Seungha Yang
5eeec16502 d3d11videosink: Use single GstD3D11Converter object
GstD3D11Converter supports videoprocessor and texture upload.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:40:47 +09:00
Seungha Yang
3919491eb2 d3d11: Use library private header in plugin
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:37:55 +09:00
Seungha Yang
9709bcf3fe d3d11compositor: Use single GstD3D11Converter object
... and remove unnessary videoprocessor/upload/copy code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:37:55 +09:00
Seungha Yang
993b9b36db d3d11convert: Add border-color property
Use user specified border-color instead of black color

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:37:55 +09:00
Seungha Yang
6a59dd95e8 d3d11convert: Use single GstD3D11Converter object
... and don't use GstD3D11VideoProcessor. Now GstD3D11Converter will
be able to convert using videoprocessor, and texture upload is also supported by
GstD3D11Converter. All the noisy code can be removed therefore.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:37:55 +09:00
Seungha Yang
91a732fe90 d3d11converter: Add support conversion using videoprocessor
* Add videoprocessor feature to d3d11converter, in order to unifiy
  conversion flow.
* Add convert_buffer() method to support automatic shader/videoprocessor
  selection. The method also supports texture upload if input memory
  cannot be used for conversion (e.g., system memory or so)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:37:55 +09:00
Seungha Yang
fdbb9041a2 d3d11overlaycompositor: Objectify overlay render implementation
Be consistent with other implementations

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-02 05:37:27 +09:00
Seungha Yang
b2d09de899 d3d11: Don't use const pointer to GstDxgiColorSpace
Instead, fill values of passed GstDxgiColorSpace struct

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2697>
2022-07-01 19:34:16 +00:00
Sebastian Dröge
2aae64edb9 decklinkvideosink: Pass video frames directly to the Decklink SDK without copying
If the video frame is stored in PBO memory then we need to copy anyway as
it might be stored in CPU-accessible GPU memory that can't be accessed
from the Decklink driver.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2674>
2022-07-01 08:46:48 +00:00
Vincent Cheah Beng Keat
5ffaf2aa09 msdkmjpegdec: Add support for error report
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2401>
2022-07-01 06:29:30 +00:00
Seungha Yang
30c8dbe032 nvencoder: Add support for dynamic GPU device selection
Adding nvautogpu{h264,h265}enc class which will accept upstream logical
GPU device object (GstCudaContext or GstD3D11Device) instead of
using pre-assigned GPU instance.

If upstream logical GPU device object is not NVENC compatible
(e.g., D3D11 device of non-NVIDIA GPU) or it's system memory,
then user specified "cuda-device-id" or "adapter-luid" property
will be used for GPU device selection.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2666>
2022-06-30 12:38:08 +00:00
Seungha Yang
ce82c0570e cuda: Add YUY2 and UYVY formats for GL interop
Those formats are not supported conversion formats by CUDA convert/scale elements
but would be useful for GL <-> CUDA interop use case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2691>
2022-06-30 11:17:15 +00:00
Seungha Yang
d9f08e17f1 cudadownload: Passthrough in case of CUDA -> SYSTEM
GstCudaMemory supports CPU access via CUDA pinned host memory already
and it would show faster memory transfer performance between
GPU and CPU than copying from/to normal system memory.
If downstream supports video meta, we can passthrough CUDA memory.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2690>
2022-06-30 10:45:45 +00:00
Corentin Damman
ae781610c8 cudaformat: add support for planar 4:2:2 YUV formats in CUDA D3D11 interop
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2269>
2022-06-30 07:30:09 +00:00
Corentin Damman
8678fc999a cudamemory: add support for planar 4:2:2 YUV formats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2269>
2022-06-30 07:30:09 +00:00
Benjamin Gaignard
d3a01eccae v4l2codecs: enumerate all possible formats
Some decoder may also allow to (down) scale the decoded video.
Use VIDIOC_ENUM_FRAMESIZES iotcl to enumerate the possible output
formats resolutions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2589>
2022-06-29 19:18:16 +00:00
Seungha Yang
85fe9fb61d nvcodec: Add cuda-device-id read-only property to stateless decoders
... and remove unnecessary intermediate subclass from class hierarchy

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2665>
2022-06-30 01:54:17 +09:00
Seungha Yang
1e11c05591 nvcodec: Add cuda-device-id read-only property to CUVID decoders
Similar to the other hardware decoder plugins, provides assigned
device id via property

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2665>
2022-06-30 01:45:20 +09:00
Seungha Yang
38e142db9a d3d11convert: Add support for GstVideoCropMeta
Performs crop, scale, and color space conversion all in
a single render pipeline. Note that cropping related property is not
added in this element (which will make negotiation very complicated),
but user can configure videocrop element for crop meta to be attached
on each buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2678>
2022-06-29 09:43:10 +00:00
Seungha Yang
1043481247 d3d11videosink: Fix for force-aspect-ratio setting when rendering on shared texture
Set specified force-aspect-ratio value on window object
in case of shared texture rendering as well

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1304
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2671>
2022-06-29 09:04:33 +00:00
Seungha Yang
236378c9d5 mfvideoenc: Fix broken encoding when resolution is not an even number
Width and height values of 4:2:0 subsampled YUV format should be even number,
and if it's not the case, there should be padding which is not a contiguous memory layout.
Do copy input frames to MediaFoundation's memory in that case for now.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1165
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2661>
2022-06-29 08:26:45 +00:00
Seungha Yang
b09ae1d635 d3d11: Enumerate devices via native DXGI API
D3D11CreateDevice() can fail for some reason (e.g., buggy GPU driver)
and then gst_d3d11_device_new() will return nullptr.
Use DXGI API directly instead of relying on the gst_d3d11_device_new()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2663>
2022-06-27 20:30:13 +00:00
Seungha Yang
aca71fd692 d3d11: Update gst_d3d11_allocation_params_new() interface
Define GST_D3D11_ALLOCATION_FLAG_DEFAULT (0) value instead of
casting enum type everywhere. And pass D3D11_RESOURCE_MISC_FLAG value

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2646>
2022-06-27 19:33:57 +00:00
U. Artie Eoff
c4a9a96a15 va: postproc: add scale-method property
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2654>
2022-06-27 12:17:54 -04:00
U. Artie Eoff
211ba46369 va: filter/postproc: move unconditional props to vavpp
Only conditional/dynamic properties should be installed/handled
by vafilter.  Thus, move and install the unconditional/static
properties in vavpp.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2654>
2022-06-27 12:17:53 -04:00
U. Artie Eoff
178f4fcd20 va: compositor/filter: use scale method setter
Use the filter's scale method member instead of the sample's member.

Removes the filter_flags member from the composite sample.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2654>
2022-06-27 10:53:11 -04:00
U. Artie Eoff
280678fe42 va: filter: add scale method field and setter
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2654>
2022-06-27 10:52:03 -04:00
Víctor Manuel Jáquez Leal
63a8fc505e va: Add vajpegdec element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1575>
2022-06-27 13:43:14 +00:00
Víctor Manuel Jáquez Leal
ec55017a83 va: allocator: Add hack for no fourcc when surface creation.
This patch adds general mechanism for handling specific hacks. In this
case for jpeg decoder in i965 driver, which cannot create surfaces
with fourcc specified.

From jpeg decoder to the allocator, which creates the surfaces,
there's a non-simple path: basedec pseudo-class adds a hacks guint32
which will be set by actual elements (vajpegdec, in this case) and
basedec will always set the hack to the allocator when the allocator
is instantiated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1575>
2022-06-27 13:43:14 +00:00
Víctor Manuel Jáquez Leal
5b28509564 va: caps: Add jpeg fields in coded caps.
Given the supported rt formats in a profile/entrypoint config it's
possible to know the supported JPEG colorspace and subsampling. This
patch adds this information in coded caps to a safer autoplugging
after jpegparser.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1575>
2022-06-27 13:43:14 +00:00
Víctor Manuel Jáquez Leal
cc30854893 va: Add jpegdecoder base class.
This base class is intented for hardware accelerated decoders, but since
only VA uses it, it will be kept internally in va plugin.

It follows the same logic as the others video decoders in the library but.
as JPEG are independet images, there's no need to handle a DBP so no need
of a picture object. Instead a scan object is added with all the structures
required to decode the image (huffman and quant tables, mcus, etc.).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1575>
2022-06-27 13:43:14 +00:00
Víctor Manuel Jáquez Leal
f36d2671e4 va: build: Remove duplicated source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1575>
2022-06-27 13:43:14 +00:00
Seungha Yang
16955ba672 cudamemorycopy: Make sure writable caps before removing fields
The caps to be modified may not be writable when D3D11/GL/NVMM
are all disabled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2664>
2022-06-27 20:28:31 +09:00
Seungha Yang
170271b86f d3d11: Revert staging buffer pool implementation
The staging buffer pool implementation was added to improve
throughput performance since we can avoid per-frame
CPU copy operation via staging texture but it turned out that
we can not make it thread safe. See
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1182

Reverting the staging texture implementation as it does not show
any visible value.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2651>
2022-06-23 22:03:52 +09:00
Seungha Yang
abd60b6b1e qsvdecoder: Fix system memory alignment
Do right padding, not left

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2651>
2022-06-23 21:43:25 +09:00
Seungha Yang
513a1cbbb3 d3d11decoder: Fix texture download
Stride applied to src/dst was reversed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2651>
2022-06-23 21:41:24 +09:00
Víctor Manuel Jáquez Leal
685a611812 va: Use driver implementation macro rather than function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2642>
2022-06-21 18:21:46 +00:00
Seungha Yang
1dc24d23d2 d3d11: Fix some typos
Fix up spelling and d3d11testsrc class meta.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2644>
2022-06-21 20:12:06 +09:00
Seungha Yang
a040450685 d3d11compositor: Performance optimization
Removing glvideomixer-like nuance (it was initially referenced)
and rewriting element since it's not an optimal design at all
from performance point of view.

* Remove wrapper bin (and internal conversion/upload/download elements)
  which will waste CPU/GPU resources. Conversion/blending can be done by the
  d3d11compositor element at once.
* Add support YUV blending without RGB conversion.
  The RGB <-> YUV conversion is completely unnecessary since YUV textures
  support blending as well.
* Remove complicated blending operation properties since it's hard
  to use from application point of view. Instead, adding "operator" property
  like what compositor element does.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2631>
2022-06-20 19:18:53 +00:00
Seungha Yang
adcb3ec1f2 d3d11converter: Fix alpha factor update
converter should set entire constant buffer values since it's mapped
with write-discard flag

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2631>
2022-06-20 19:18:53 +00:00
Seungha Yang
eaa9943b98 d3d11decoder: Check 16K resolution support
16K decoding is supported by some GPUs

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2629>
2022-06-18 18:02:44 +00:00
Seungha Yang
e1fd0f620f d3d11decoder: Add support for non-zero crop-{x,y} position
AVC and HEVC define crop rectangle and the x/y coordinates might
not be zero. This commit will address the non-zero x/y offset coordinates
via GstVideoCropMeta if downstream supports the meta and d3d11 memory.
Otherwise decoder will copy decoded texture into output frame.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2624>
2022-06-17 20:15:02 +00:00
Seungha Yang
461416b5f1 d3d11converter: Implement filling border color
Equivalent to GST_VIDEO_CONVERTER_OPT_BORDER_ARGB and
GST_VIDEO_CONVERTER_OPT_FILL_BORDER options of GstVideoConverter

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2622>
2022-06-17 19:40:48 +00:00
Seungha Yang
59f39724b7 d3d11converter: Objectify converter
... and set conversion options via property

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2622>
2022-06-17 19:40:48 +00:00
Seungha Yang
3ed94c2dde d3d11shader: Remove GstD3D11Quad helper object
It's not very generic to be used for various scenario. Use native D3D11
APIs directly instead.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2622>
2022-06-17 19:40:48 +00:00
Seungha Yang
ec6384947b d3d11compositor: Don't use GstD3D11Quad
The helper object will be removed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2622>
2022-06-17 19:40:48 +00:00
Seungha Yang
93662da3d1 d3d11overlaycompositor: Fix HLSL compiler warning
warning X3206: 'Sample': implicit truncation of vector type

And don't use GstD3D11Quad since it will result in redundant API calls

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2622>
2022-06-17 19:40:48 +00:00
Seungha Yang
8e5a4246b9 qsvh264dec: Use newly added avcC data parsing API
Use gst_h264_parser_parse_decoder_config_record() method to parse
codec_data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2449>
2022-06-15 19:58:59 +00:00
Sebastian Dröge
87230db55c decklinkvideosink: Fix selection of > PAL widescreen modes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2601>
2022-06-15 13:23:51 +00:00
Víctor Manuel Jáquez Leal
bb84a533bf va: basedec: Select output format with the used chroma in decoder.
Currently, video format is decided with downstream caps intersection,
but that's not correct since chroma is not considered. The video
decoders have to decide the output format given the used chroma, not
by the downstream caps negotiation.

This patch changes that. Still, caps feature is selected by caps
negotiation, then, with the preferred caps feature, the output format
is search within that caps feature.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2569>
2022-06-15 00:00:53 +00:00
Seungha Yang
7b39a09f9d d3d11converter: Add support for colorimetry conversion
Handle color primaries and gamma functions.
HDR <-> SDR conversion (tone mapping) should be implemented as well
but not a part of this patch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2581>
2022-06-14 05:04:53 +09:00
Seungha Yang
3a44d14ac8 d3d11convert: Don't passthrough if colorimetry conversion is required
Different input/output colorimetry requires conversion

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2581>
2022-06-14 04:41:40 +09:00
Seungha Yang
f3f905b491 d3d11window: Use SDR colorspace whenever possible
PQ uses completely different light level scale
and it should not be used for SDR bt2020.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2581>
2022-06-14 04:39:31 +09:00
Seungha Yang
ac26860a80 d3d11converter: Rewrite conversion object
Rewriting GstD3D11Converter (equivalent to GstVideoConverter)
to optimize some conversion path and clean up.

* Extract YUV <-> RGB conversion matrix building method to
  utils. It will be used by other implementation
* Use calculated offset values for YCbCr <-> YPbPr conversion
  instead of hardcoded values
* Handle color range adjustment
* Move transform matrix building helper function to utils.
  The method will be used by other elements
* Use single constant buffer. Multiple constatne buffer for
  conversion pipeline is almost pointless
* Remove lots of duplicated HLSL code and split pixel shader
  code path into sampling -> colorspace conversion ->
  shader output packing
* Avoid floating point precision error around UV coordinates
* Optimize RGB -> YUV conversion path

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2581>
2022-06-14 04:37:30 +09:00
Benjamin Gaignard
a6f8cc4b95 v4l2codecs: Add P010 pixel format
Copy V4L2_PIX_FMT_P010 define from linux header.
V4L2_PIX_FMT_P010 is the little endian definition of P010 so map
it GST_VIDEO_FORMAT_P010_10LE.
Add it v4l2 default video formats to allows v4l2 decoders to
enumerate and use it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2590>
2022-06-13 16:44:29 +02:00
Tim-Philipp Müller
9d9e59622f Bump GLib requirement to >= 2.62
Can't require 2.64 yet because of
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/323

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
2022-06-10 06:01:41 +00:00
Sebastian Dröge
92a4088621 decklink: Add support for 4K DCI, 8K/UHD2 and 8K DCI modes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2570>
2022-06-10 05:31:35 +00:00
Seungha Yang
44768b233a qsvencoder: Do not copy if input is D3D11 texture
In case that input is D3D11 texture, QSV seems to work regardless
of the alignment. Actually the alignment requirement seems to make
only sense for system memory.
Other Intel GPU dependent implementations (new VA encoder, and MediaFoundation)
do not require such alignment nor other vendor specific ones (NVENC and AMF)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2540>
2022-06-09 20:28:10 +00:00
Seungha Yang
e8fdf9177a d3d11decoder: Fix for alternate interlacing signalling
Don't set d3d11+interlace caps feature. None of d3d11 elements
support it

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2579>
2022-06-09 23:19:24 +09:00
Seungha Yang
45dd8bf35a d3d11: Add d3d11testsrc element
Adding Direct3D11 based videotestsrc element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2554>
2022-06-09 05:08:41 +09:00
Jan Schmidt
d76ba0292f amc: Add H.265 encoder mapping.
Add mime type mapping to enable the use of Android H.265 encoders

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2511>
2022-06-08 03:25:13 +00:00
Mengkejiergeli Ba
1fe5655c2a msdkdec: Decoder should use its own pool when downstream allocator is not recognizable
Msdkdec should use it own pool when the allocation from downstream query
is not any msdk_allocator (i.e. msdk_video_allocator,
msdk_dmabuf_allocator and msdk_system_allocator). Otherwise, when using
pipeline "msdkh264dec ! vah264enc !" to transcode a not 16-bit-aligned
stream (i.e. 1920x1080), the transcoding will fail due to the size
mismatch issue between decoder pool and encoder pool.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2451>
2022-06-08 02:48:53 +00:00
Víctor Manuel Jáquez Leal
045b6f5ea3 vah264enc: Guard logging functions
.. and use spec for rate control rather than static switch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
2022-06-07 12:02:21 +00:00
Víctor Manuel Jáquez Leal
261714e25d vah264enc: Support default and none rate control.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
2022-06-07 12:02:21 +00:00
Víctor Manuel Jáquez Leal
e27ad1a273 va: encoder: Rate control property.
Fixes: #1241
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2522>
2022-06-07 12:02:21 +00:00
Eric Knapp
1818374de2 decklinkvideosink: Add 3G-SDI Level A output support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2544>
2022-06-07 10:07:42 +03:00
Mengkejiergeli Ba
7696ca83b2 msdkav1enc: Reorder pts
This is a workaround for pts because oneVPL cannot handle the pts
correctly when there is b-frames. We first cache the input frame pts in
a queue then retrive the smallest one for the output encoded frame as
we always output the coded frame when this frame is displayable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
2022-06-02 13:39:11 +00:00
Mengkejiergeli Ba
ae7dfb9680 msdkav1enc: Add b-pyramid and p-pyramid
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
2022-06-02 13:39:11 +00:00
Mengkejiergeli Ba
8ea23fd0da msdkav1enc: Add tile for encoding
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
2022-06-02 13:39:11 +00:00
Mengkejiergeli Ba
610b7ee66a msdk: Add msdkav1enc element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2089>
2022-06-02 13:39:11 +00:00
Jakub Adam
9fd396834a amfencoder: always empty the queue when pushing output samples
gst_amf_encoder_try_output() pushes at most one output buffer downstream
although more may be ready. As a consequence, output samples will keep
queueing up in AMFComponent whenever QueryOutput() returns AMF_REPEAT
(and do_wait is FALSE). This has negative impact on latency when the
video being encoded is a live stream.

In order to avoid it, always retrieve and push all samples available in
AMFComponent's output queue at once.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2536>
2022-06-01 18:19:09 +02:00
Seungha Yang
7acfd0cdd1 directshow: Fix for uninitialized debug category warning
A method in the code is used in another place (device provider)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2519>
2022-05-30 12:00:43 +00:00
Víctor Manuel Jáquez Leal
be948816d3 va: Register base classes as abstract.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2521>
2022-05-29 16:03:46 +00:00
Víctor Manuel Jáquez Leal
ae9fe4a851 va: encoder: Use entrypoint type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2521>
2022-05-29 16:03:46 +00:00
Víctor Manuel Jáquez Leal
4474056f6f va264enc: Fix typo.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2508>
2022-05-29 11:56:39 +00:00
Víctor Manuel Jáquez Leal
e83983d7ca va: encoder: Fix regression since commit 2042c2d4f0.
There's no need to compare with the open entrypoint to query the
encoder. This commit removes the checks to the configured entrypoint
with the parameter.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2508>
2022-05-29 11:56:39 +00:00
Seungha Yang
5762dfb15d mfvideoencoder: Handle dynamic property update
Re-init MFT on property update to apply new encoding options

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
2022-05-28 23:12:53 +09:00
Seungha Yang
2db6e0ac3c mediafoundation: Run indent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
2022-05-28 23:12:53 +09:00
Seungha Yang
9fbf4f9c10 mfvideoenc: Remove redundant bitwise or operation
MFT_ENUM_FLAG_SORTANDFILTER_APPROVED_ONLY (0xc0) covers
MFT_ENUM_FLAG_SORTANDFILTER (0x40)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
2022-05-28 23:12:53 +09:00
Seungha Yang
442d21ab2a mfvideoencoder: Early terminate d3d11 interop
Shared texture will work only for the same GPU

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
2022-05-28 23:12:53 +09:00
Seungha Yang
39dd92fa5e mfvideoencoder: Check HRESULT code as well for GPU sync
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
2022-05-28 23:12:53 +09:00
Seungha Yang
00ae87cbb5 mfvideoencoder: Don't specify keyed mutex misc flag
Current implemetation copies textures using non-keyed mutex way.
D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX is pointless

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2037>
2022-05-28 23:12:53 +09:00
Víctor Manuel Jáquez Leal
24527856cb vacompositor: Pass video info pointer than copying it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2496>
2022-05-28 00:00:39 +00:00
Víctor Manuel Jáquez Leal
f9b631e0ea vacompositor: Remove useless consts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2496>
2022-05-28 00:00:39 +00:00
Seungha Yang
fe64295841 d3d11decoder: Work around Intel DXVA driver crash
Intel DXVA driver crashes sometimes (from GPU thread) if
ID3D11VideoDecoder is released while there are outstanding view objects.
To make sure the object life cycle, holds an ID3D11VideoDecoder refcount
in GstD3D11Memory object.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2504>
2022-05-27 15:13:15 +00:00
Seungha Yang
7c8902c983 qsvencoder: Bind internal texture to render target
... so that memory allocator can initialize texture with black color

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2502>
2022-05-27 14:03:49 +00:00
Mengkejiergeli Ba
81d2982476 msdkh265enc: Add intra refresh parameters
Note that for msdkh265enc, intra refresh parameters are only supported
under low-power mode. If these parameters are set without enabling lowpower,
they will be simply ignored.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2308>
2022-05-27 02:15:42 +00:00
Mengkejiergeli Ba
9c8cb97db9 msdkh264enc: Add intra refresh parameters
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2308>
2022-05-27 02:15:42 +00:00
Jan Schmidt
6c0423b861 amc: Don't map input buffer with write mode
When copying data out of a GStreamer buffer, we don't
need to map it writable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2492>
2022-05-26 12:44:03 +00:00
He Junyan
2042c2d4f0 va: H264enc: Add encoder for VAEntrypointEncSliceLP.
We name vah264lpenc to support H264's VAEntrypointEncSliceLP encoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2472>
2022-05-25 20:40:48 +00:00
He Junyan
d47416d3a2 va: encoder: Do not reset the frame count when reconfig().
We should not reset the input/output_frame_count when some configure
changes. For example, the if resolution changes, the current way just
resets the frame count and make the PTS of the output buffer restart
from the original PTS of the first frame. That causes a lot of QOS
event and drop all the new frames.
We should only reset them when encoder start().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2489>
2022-05-25 18:56:34 +00:00
He Junyan
994f2c56e2 va: encoder: change reset_state() to a virtual function of base class.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2489>
2022-05-25 18:56:34 +00:00
U. Artie Eoff
8a161880fc vacompositor: check caps and info return values
Check return values for get caps and video info from caps.

This was flagged by static analysis.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2480>
2022-05-25 10:16:00 +00:00
Seungha Yang
9b128f1841 d3d11decoder: Don't print error log on negotiation failure
It may not be a critical error and even expected when shutting down
pipeline or flushing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2483>
2022-05-25 05:46:40 +09:00
Erwann Gouesbet
09a45c37ca d3d11screencapture: Fix missing/outdated cursor shape
d3d11screencapture can miss a cursor shape to draw or draw an outdated cursor shape.
 - AcquireNextFrame only provides cursor shape when there is one update
 - current d3d11screencapture skips cursor shape when mouse is not drawn

So, if a gstreamer application uses d3d11screencapture with cursor initially not drawn
"show-cursor"=false and then switches this property to true, the cursor will not be
actually drawn until AcquireNextFrame provides a new cursor shape.
This commit makes d3d11screencapture always update the cursor shape information, even
if the mouse is not drawn. d3d11screencapture will always have the latest cursor shape
when requested to draw it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2485>
2022-05-24 20:10:00 +00:00
Víctor Manuel Jáquez Leal
8433bab0b5 va: Avoid unused variable if logging is disabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2478>
2022-05-24 19:07:47 +00:00
Víctor Manuel Jáquez Leal
84c0d02755 va: Keep include's code style
Headers are in alphabetical order.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2465>
2022-05-24 13:41:50 +00:00
Víctor Manuel Jáquez Leal
46e536898f vafilter: Fix logging of unsupported alpha blending.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2477>
2022-05-24 12:30:49 +00:00
Seungha Yang
4c384f8356 qsv: Add AV1 encoder element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2467>
2022-05-23 13:28:11 +00:00
Seungha Yang
8e665fa435 qsvencoder: Move common property to baseclass
adapter-luid and device-path are common for all codecs

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2467>
2022-05-23 13:28:11 +00:00
He Junyan
fc75e38496 va: baseenc: No need to check the frame pointer in handle_frame().
No need to check the NULL pointer of "frame" in error handling, it
is assured non-NULL by base class and we already use it everywhere
in this function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2471>
2022-05-23 15:03:03 +08:00
He Junyan
de5952bc83 va: baseenc: include the "vacompat.h" for old version glib.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2463>
2022-05-22 15:03:54 +08:00
U. Artie Eoff
d2651a1e0b va: vpp: enable compositor
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2332>
2022-05-21 21:18:15 +02:00
U. Artie Eoff
afe8723196 va: vpp: add compositor
New implementation of a VA-API compositor with blend feature.

Various chunks of code was taken from vavpp.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2332>
2022-05-21 21:18:15 +02:00
He Junyan
a2920411d3 va: Apply the va base encoder to the vah264enc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2330>
2022-05-20 22:58:58 +02:00
He Junyan
21a9ba7e7e va: Add the GstVaBaseEnc common object for all va encoders.
Just like the GstVaBaseDec and GstVaBaseTransform, this base encoder
will handle all common logic for all va encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2330>
2022-05-20 22:58:58 +02:00
Seungha Yang
909154a989 qsv: Disable non-MSVC build on Windows
... and remove pointless UWP consideration that will never work.

Cross-compiled binary has an issue which causes deadlock.
Although cerbero will not build this plugin for non-MSVC build,
people can still build this plugin and may complain its brokenness.

See also
https://gitlab.freedesktop.org/gstreamer/cerbero/-/merge_requests/854

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2431>
2022-05-17 03:32:10 +09:00
Diogo Goncalves
acfc9ae216 avfvideosrc: fix wrong framerate selected for caps
This fix solves an issue where a format that doesn't support the
requested framerate would be selected. It ensures that we use the first
format and framerate pair that supports the requested caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2331>
2022-05-13 19:38:45 +00:00
Seungha Yang
858520932c d3d11decoder: Add hardcoded minimum resolution values to caps for NVIDIA
NVIDIA GPUs have undocumented limitation regarding minimum resolution
and it can be queried via a NVDEC API. However, since we don't want to
bring CUDA/NVDEC API into D3D11, use hardcoded values for now
until we find a nice way for capability check.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2406>
2022-05-12 18:20:26 +00:00
Víctor Manuel Jáquez Leal
4c97ffeafb va: basedec: Always select first available format.
If the stream chroma doesn't match with any video format in the source
caps template (generated from va config surface formats) instead of
return unknown, return the first available format in the template,
assuming that the driver would be capable to do color conversions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2404>
2022-05-11 15:03:54 +02:00
Víctor Manuel Jáquez Leal
c47255d148 va: basedec: Select format from template or negotiated caps.
Instead of using a hard-coded list of preferred formats according the
chroma type, now if now caps are pre-negotiated, from template caps
will choose the first format with the same chroma type. If
pre-negotiated, then it will choose the first format, with same chroma
type, from the first caps structure.

Also all the decoders will check if GST_VIDEO_FORMAT_UNKNOWN is
returned, failing the negotiation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2351>
2022-05-09 08:50:58 +00:00
Dmitry Osipenko
fd694d840a v4l2codecs: h264: Set frame type flags
V4L spec now requires decode_params flags to be set in accordance to the
frame's type. In particular this is required by H.264 decoder of NVIDIA
Tegra SoC to operate properly. Set the flags based on type of parsed
slices.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1757>
2022-05-06 13:35:59 +00:00
Seungha Yang
e0a9a73adf d3d11screencapturesrc: Fix crash when d3d11 device is different from owned one
GstD3D11ScreenCapture object is pipeline-independent global object
and the object can be shared by multiple src elements,
in order to overcome a limitation of DXGI Desktop Duplication API.
Note that the API allows only single capture session in a process for
a monitor.

Therefore GstD3D11ScreenCapture object must be able to handle a case
where a src element holds different GstD3D11Device object. Which can
happen when GstD3D11Device context is not shared by pipelines.

What's changed:
* Allocates capture texture with D3D11_RESOURCE_MISC_SHARED for the
  texture to be able to copied into other device's texture
* Holds additional shader objects per src element and use it when drawing
  mouse

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1197
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2366>
2022-05-05 18:18:57 +00:00
Seungha Yang
58c94eed84 nvh264dec,nvh265dec: Don't realloc bitstream buffer per slice
Allocated memory size has not been updated which results in
realloc per slice. Fixing it and also release bitstream buffer
on ::close(), not finalize.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2361>
2022-05-05 12:15:27 +00:00
Jakub Adam
03b6dab006 d3d11screencapture: Set viewport when drawing mouse cursor
If there weren't any moved/dirty regions in the captured frame, the
viewport of the ID3D11DeviceContext would be left at whatever previous
value it had, which could lead to the cursor being drawn in a wrong
position and/or in an incorrect size.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2362>
2022-05-04 17:18:32 +02:00
Seungha Yang
33e77782c6 nvcodec: Add AV1 decoder
Adding GstCodecs based AV1 decoder element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1453>
2022-05-04 01:23:25 +09:00
Seungha Yang
1444dd91c5 meson: nvcodec: Remove unnecessary override option and fix build with non-MSVC
cpp_std=c++11 was hack for macOS build but we don't build this plugin
for Apple device anymore. And add "-Wno-deprecated-declarations"
compile option for gcc/clang

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1453>
2022-05-04 01:10:07 +09:00
Seungha Yang
fe4d6bb469 nvcodec: Bump SDK header version to 11.1
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1453>
2022-05-03 23:56:34 +09:00
Seungha Yang
29aab904a8 nvdecoder: Handle DPB size margin in a single place
... instead of each subclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2343>
2022-05-03 14:17:49 +00:00
Seungha Yang
a8b2fbf77f d3d11decoder: Handle DPB size margin in a single place
... instead of each subclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2343>
2022-05-03 14:17:49 +00:00
Seungha Yang
6a4c42c03f codecs: Signal required DPB size for AV1,MPEG2,VP8, and VP9 via new_sequence()
Make all codecs consistent so that subclass can know additional DPB
size requirement depending on render-delay configuration regardless
of codec. Note that render-delay feature is not implemented for AV1
yet but it's planned.

Also, consider new_sequence() is mandatory requirement, not optional

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2343>
2022-05-03 14:17:49 +00:00
Nicolas Dufresne
ab839f3642 v4l2codecs: Port to the new tile size helper
This will complete the scaling of width/height shift scaling
as only a partial implementation was made.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Seungha Yang
4047653275 d3d11h265dec: Assign PRIMARY + 1 rank
Promote d3d11h265dec to be default one if available

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2314>
2022-04-27 20:06:53 +00:00
Seungha Yang
dce45586e8 nvvp9sldec: Increase DPB size to cover render delay
This should've included in the previous MR
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/987
already, but missed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2313>
2022-04-27 18:35:07 +00:00
Thibault Saunier
3c959ff53e cudaconvert: Enhance debugging when setting video info fails
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2300>
2022-04-26 19:04:06 +00:00
He Junyan
264e577e7e va: dec: Use gst_buffer_pool_config_set_va_alignment() to set alignment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2282>
2022-04-26 20:26:09 +08:00
Seungha Yang
81ee2a9f2a qsvencoder: Workaround for invalid DTS with VP9
SDK runtime seems to report zero DTS for all frames in case of VP9 but
we don't need to use DTS for the codec.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2291>
2022-04-26 04:51:54 +09:00
Seungha Yang
205a23f456 nvcodec: Stop building for non-{Windows,Linux} target
The other platforms, specifically macOS have not been supported already
because this plugin loads so or dll. Moreover, NVIDIA dropped
support for macOS as of CUDA 11.0. See also
https://developer.nvidia.com/nvidia-cuda-toolkit-11_0_0-developer-tools-mac-hosts

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2283>
2022-04-25 15:50:52 +00:00
Seungha Yang
9f19ca68b3 d3d11videosink: Fix for unhandled mouse double click events
Only window created with CS_DBLCLKS style can receive those mouse
double click events, so we need to use the style for internal/external
windows can get double click events.

Also, passthrough mouse events to parent window in the same message pumping
threads instead of manually forwarding each mouse event.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1172
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2277>
2022-04-23 13:20:54 +00:00
Xavier Claessens
1a0eea3299 Meson: Fix deprecation warnings
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1876>
2022-04-23 00:33:00 +00:00
Corentin Damman
df64280874 cuda-converter: fix nvrtc compilation on non-English locale systems
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2268>
2022-04-22 18:57:22 +00:00
He Junyan
277aa12b86 va: h264enc: Do not let L0 number surplus the HW limitation.
The algorithm to calculate the L0/L1 number may let the L0 number
surplus the HW limitation. We should ensure that limitation after
that calculation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2202>
2022-04-22 13:32:21 +00:00
He Junyan
43dfe021da va: vpp: Update the colorimetry and HDR fields when fixup src caps.
When we fixup src caps, the current way of handling the HDR fields is not
correct.
1. We trim the HDR fields only when the input caps is not a subset of the
fixup src caps. But in fact, the input caps with HDR fields such as the
"mastering-display-info" can possibly be the subset of the fixup src caps,
if they have all same other fields.
2. We always copy the colorimetry from input caps to src caps if it is
absent. But when hdr-tone-mapping is enabled, the HDR->SDR conversion makes
the colorimetry change. We should use downstream's setting, or just use the
default colorimetry of SDR.

We changes to:
1. If hdr-tone-mapping is enabled, we trim all HDR fields and add a correct
colorimetry.
2. Copy colorimetry from input if it is still absent.
3. Consider the subset replacement.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2244>
2022-04-22 06:53:37 +00:00
Seungha Yang
6a3776c527 qsv: Add GPU description to element long-name on Windows
Would be useful for a multi-Intel-GPU system

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2249>
2022-04-20 18:49:18 +00:00
Víctor Manuel Jáquez Leal
722a6c7708 vapostproc: Notify if hdr-tone-mapping property changes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2247>
2022-04-20 17:01:52 +00:00
Víctor Manuel Jáquez Leal
e207ff905b va: Expose a couple va surface/buffer methods.
And use them in va plugin.

Also, set as default logging category the vadisplay one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2077>
2022-04-20 15:15:56 +00:00
Xavier Claessens
b99ecc78ca Replace gst-i18n-*.h with gi18n-lib.h
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Thibault Saunier
dcd2ccad59 cuda: Fix typo in gst_cuda_buffery_copy_type_to_string
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>
2022-04-19 16:39:43 +00:00
Thibault Saunier
c033f8fad2 cuda: Factor out a public GstCUDA library
So applications and elements implemented outside GStreamer can reuse
our infrastructure

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>
2022-04-19 16:39:43 +00:00
Thibault Saunier
3549d59725 nvenc: Give more details about errors
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>
2022-04-19 16:39:43 +00:00
Seungha Yang
c38869212c d3dvideosink: Remove outdated comment
d3dvideosink is not a primary video sink element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2223>
2022-04-18 20:27:34 +00:00
Seungha Yang
dd32e2efbc d3d11decoder: Do not preallocate texture using downstream d3d11 buffer pool
Our decoder implementation does not use downstream d3d11 pool for
decoding because of special requirement of D3D11/DXVA. So preallocation
using the downstream buffer pool will waste GPU memory in most cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2211>
2022-04-18 18:31:02 +00:00
He Junyan
4c5d34648c va: h264enc: Fix the forgotten unlock() when getting device path property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2215>
2022-04-18 12:44:19 +08:00
Seungha Yang
23e280f05b qsvdecoder: Use system memory for non-d3d11 downstream
QSV's memory download implementation seems to be more faster
than our implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 22:59:48 +09:00
Seungha Yang
9543998aa3 qsv: Add H.265 decoder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 20:57:31 +09:00
Seungha Yang
d136c98770 qsv: Include single gstva.h
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 20:57:31 +09:00
Seungha Yang
fba44e8a01 qsvh264dec: Don't register element if it's not supported by device
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 20:57:31 +09:00
Seungha Yang
0692a5dde9 qsvh264dec: Add support for packetized format
Handle avc/avc3 packetized formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 20:57:26 +09:00
Seungha Yang
3c3274a8da qsv: Move debug init into each source file
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 04:15:13 +09:00
Seungha Yang
a9a49c235d qsvdecoder: Reset next_task_index per init_session()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>
2022-04-17 04:15:13 +09:00
Seungha Yang
b5a8bef5a7 d3d11decoder: Copy HDR10 related caps field manually
If negotiate() is called from the set_format() chain, sinkpad may not
hold caps yet, so baseclass cannot copy it over to srcpad caps.
Copy them manually.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2203>
2022-04-16 18:36:41 +00:00
Seungha Yang
86cf307a6c qsvencoder: Rename property name i-frames to idr-interval
... and clarify the meaning of the value for each h264 and h265
encoder since the usage of mfxInfoMFX::IdrInterval is different
per codec.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2204>
2022-04-16 23:34:41 +09:00
Seungha Yang
f848619ff4 qsvh265enc: Write HDR10 metadata SEI
If device supports HDR10 metadata API, write the information
into bitstream per IDR.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2204>
2022-04-16 23:34:41 +09:00
Víctor Manuel Jáquez Leal
a2a6ece487 vah264enc: Use GstVaFeature enum for enabling MBBRC.
GstVaFeature is a common enumeration for auto/disabled/enabled kind of
property setting.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>
2022-04-16 11:11:51 +00:00
Víctor Manuel Jáquez Leal
3a7c1ddb3c vah264enc: Move rate-control enum to encoder class helper.
Since it's a common enumeration used, as user setting property, for
most of codecs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>
2022-04-16 11:11:51 +00:00
Víctor Manuel Jáquez Leal
81951c59ef vah264enc: Add device-path property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>
2022-04-16 11:11:51 +00:00
Corentin Damman
c68c40a6bc cudautils: fix critical typo in gst_cuda_buffer_fallback_copy
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2194>
2022-04-16 02:16:22 +00:00
He Junyan
c5546d476a va: h264enc: Correct the hierarchical level name for pyramid-b frames.
The current way names the level by the number of B frames it contains, the
less it contains, the higher level it is. So the non ref B frames are in the
lowest layer and the B frames in the highest level refer to I/P frames.
But the widely used way is just the opposite, the ref B frames are in the
lower level and non ref B frames are at the highest level.
The is just a terminology change, and does not have any effect for compression
result and quality.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2149>
2022-04-13 08:22:32 +00:00
Seungha Yang
83ba83924a amfh265enc: Handle preset option
Add missing preset option handling

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2165>
2022-04-13 01:46:34 +09:00
Seungha Yang
097919f79b amfencoder: Do shared resource copy only if texture belongs to other device
Staging texture from the same d3d11device can be copied without
shared resource handling

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2165>
2022-04-13 01:42:34 +09:00
Seungha Yang
2548014dfc win32: Enable high-resolution timer for MinGW build
timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>
2022-04-12 15:09:16 +00:00
Andoni Morales Alastruey
2df32360b2 amfcodec: fix setting quality presets
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2159>
2022-04-12 12:14:04 +02:00
Seungha Yang
ad9c435647 amfcodec: Fix for MinGW build
timeapi.h header might not be missing depending on toolchain.
Also do hard meson error if winmm dep is not available but
amfcodec is explicitly enabled.
And fixing various GCC build warning errors.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2155>
2022-04-11 18:44:40 +00:00
Seungha Yang
ad434759a9 qsv: Add JPEG encoder
Note that YUY2 is not supported yet, since the format support is not
implemented now.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2142>
2022-04-10 23:38:07 +09:00
Seungha Yang
89293656e4 amfcodec: Update plugin cache
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2143>
2022-04-10 03:15:02 +09:00
Seungha Yang
a0d8133d60 nvencoder: Update property names and default values
Update properties of newly written D3D11/CUDA mode encoders
to be consistent with Intel QSV plugin. And rename "zerolatency"
to "zero-reorder-delay" because previous "zerolatency" may
misleading

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2140>
2022-04-09 14:00:35 +00:00
Seungha Yang
7b89cdbefe qsvencoder: Update property names and default values
Stop using MSDK plugins property naming, instead use unified names
and default values to be consistent with newly written NVIDIA encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2140>
2022-04-09 14:00:35 +00:00
Seungha Yang
f413449a28 amfcodec: Add support for h264/h265 encoding
New encoder implementations for AMD GPU using AMF API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2109>
2022-04-08 17:59:12 +00:00
Seungha Yang
c41a72a1ff amfcodec: Import AMF SDK headers
SDK version v1.4.24 at the commit of
fbf12cd39f

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2109>
2022-04-08 17:59:12 +00:00
Seungha Yang
6e4ffaee1e msdk: Fix Windows build
Headers of gstva should not be included on Windows

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2141>
2022-04-09 02:13:57 +09:00
Seungha Yang
2291781087 d3d11window: Use ANSI version WIN32 API explicitly
We were using ANSI version APIs implicitly because UNICODE is not
defined by ourselves. But potentially it can be broken if user
defines UNICODE.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2131>
2022-04-08 11:51:37 +00:00
Seungha Yang
fb226f4733 d3d11: Run indent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2131>
2022-04-08 11:51:37 +00:00
Seungha Yang
26fa35dcdf qsvencoder: Don't use USAGE_HINT_ENCODER and enable derived image support
Peformance issue by disabled derived image support was reported

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2111>
2022-04-04 21:18:13 +00:00
Seungha Yang
b74da32b5c Revert "vah264enc: Disable derived image support"
This reverts commit 0011feb0d6.

The commit caused performance-wise regression for some platforms

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2111>
2022-04-04 21:18:13 +00:00
Tong Wu
4e97cc24a7 msdk: use mfxU32 instead of uint32_t
Msdk should use mfx variables defined in mfxdefs.h. Replace uint32_t
with mfxU32.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2091>
2022-04-04 20:28:25 +00:00
Seungha Yang
5ed8e416fe nvcodec: Fix typos
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2107>
2022-04-03 22:12:33 +09:00
Seungha Yang
9b5fe81d01 nvencoder: Fix operator overloading
GUID equality check was inverted

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2107>
2022-04-03 22:09:19 +09:00
Seungha Yang
0011feb0d6 vah264enc: Disable derived image support
Behavior of derived image seems to be platform dependent and
it's buggy in some cases.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1110
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2086>
2022-04-02 07:04:03 +00:00
He Junyan
976356e159 va: h264enc: Do not use USAGE_HINT_ENCODER for input pool.
It seems that the VA_SURFACE_ATTRIB_USAGE_HINT_ENCODER is used only
for the recon surfaces, if we set this flags for input raw surfaces,
the alignment is wrong and we get broken result.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2100>
2022-04-02 06:23:03 +00:00
Xavier Claessens
b004464ac6 Remove glib and gobject dependencies everywhere
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.

While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Seungha Yang
b5ed0eb4b0 qsvencoder: Add support for VA memory
Use VA allocator and buffer pool implementation for zero-copy
encoding with upstream VA elements

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2030>
2022-03-31 20:48:24 +00:00
Seungha Yang
9c44b32c21 qsv: Use pipeline's VA context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2030>
2022-03-31 20:48:24 +00:00
Víctor Manuel Jáquez Leal
6d2f57b6c7 libs: va: add VA allocator parameter for derived images usage.
Added GstVaFeature enum type, and new parameter for VA allocator's
set_format() and get_format(). Also added a new parameter in VA pool
gst_va_pool_new_with_config() and
gst_buffer_pool_config_set_va_allocation_params().

This new parameter will define if derived images will by used for
buffer mapping.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2057>
2022-03-31 14:14:45 +00:00
Víctor Manuel Jáquez Leal
8759014f4c va: encoder: Remove unused allocation config.
Since it's also done inside of gst_va_pool_new_with_config().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2072>
2022-03-30 22:18:06 +00:00
Víctor Manuel Jáquez Leal
599257bf10 vapostproc: Build classification dynamically.
By default, the classification is
"Converter/Filter/Colorspace/Scaler/Video/Hardware", but if VA
post-processor driver supports either color balance, skin tone
enhancement, sharpening or noise reduction, "Effect" is added.

Thus, if vapostproc ranking is raised, it can be chosen by
autovideosink.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2066>
2022-03-30 04:24:35 +00:00
Víctor Manuel Jáquez Leal
400faf7361 va: Set <gst/va/gstva.h> as library single point entry header.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
2022-03-29 19:48:30 +00:00
He Junyan
990fbb3b52 va: Move allocators and pool objects into gstva library.
In order to other plugins use gstva objects, such as allocators and buffer
pools, this merge request move them from the va plugin to the gstva library.

This objects are not exposed in <gst/va/gstva.h> since they are not expected
to be used by users, only by plugin implementators.

Because of the surface copy design, which is used to implement allocator's
mem_copy() virtual function, depends on the vafilter, which is kept inside
the plugin, memory copy through VAPosproc is disabled and removed temporarly.

Also added some missing parameter validation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
2022-03-29 19:48:30 +00:00
He Junyan
53783eab6c va: Move the video format functions into gstlibva.
Untabifying header file.

The logging category was moved from the plugin generic category to
the display category. It can argue that video formats hacks are
display dependant.

Added validations for input parameters.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
2022-03-29 19:48:30 +00:00
Seungha Yang
886cfecd36 qsvencoder: Add support for dynamic bitrate update
... and add more encoding options.

QSV API supports dynamic bitrate change without IDR insertion.
That's more efficient way of runtime encoding option update
than starting from new sequence with IDR per bitrate option change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>
2022-03-29 15:52:58 +00:00
Seungha Yang
a8d7b10cc4 qsvh265enc: Add missing gop-size property
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>
2022-03-29 15:52:58 +00:00
Seungha Yang
1a7b23dc02 qsv: Fix mfxFrameAllocator::Lock for encoder
Only read map is possible for encoder input system memory

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>
2022-03-29 15:52:58 +00:00
Matthew Waters
b8a5e7a4e4 applemeida/texturecache: remove unused variable
Fixes:

../sys/applemedia/videotexturecache.m:71:20: error: variable 'features' set but not used [-Werror,-Wunused-but-set-variable]
  GstCapsFeatures *features;
                   ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
3ffbb66593 applemedia/corevideobuffer: remove unused variable
Fixes:

../sys/applemedia/corevideobuffer.c:209:19: error: variable 'video_meta' set but not used [-Werror,-Wunused-but-set-variable]
    GstVideoMeta *video_meta;
                  ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
b8f83c9d14 applemedia/iosgl: remove unused variable
Fixes:

../sys/applemedia/iosurfaceglmemory.c:219:41: error: variable 'texfmt' set but not used [-Werror,-Wunused-but-set-variable]
    GLuint tex_id, tex_target, texifmt, texfmt;
                                        ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
49e452525d vtdec: remove unused variable
Fixes:

../sys/applemedia/vtdec.c:611:35: error: variable 'output_flags' set but not used [-Werror,-Wunused-but-set-variable]
  VTDecodeFrameFlags input_flags, output_flags;
                                  ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
edd9ec0456 avsamplevideosink: remove unused variable
Fixes

../sys/applemedia/avsamplevideosink.m:80:20: error: variable 'gstelement_class' set but not used [-Werror,-Wunused-but-set-variable]
  GstElementClass *gstelement_class;
                   ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Matthew Waters
651cd8e0bb avfassetsrc: fix unused-but-set warning
../sys/applemedia/avfassetsrc.m:1014:12: error: variable 'caps' set but not used [-Werror,-Wunused-but-set-variable]
  GstCaps *caps;
           ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Andrew Pritchard
432354e6d4 Fix GstAmcSurfaceTexture segfault
Check that `self` and `self->callback` are defined. `self` can be set to
`NULL` in `remove_listener`, and `self->callback` can be set to `NULL`
inside `gst_amc_surface_texture_jni_set_on_frame_available_callback`.
This can cause a segfault since the Java object can outlive the C
object, and call the callback after `remove_listener` is called.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2024>
2022-03-28 04:44:21 +00:00
Nicolas Dufresne
c9d8b8a972 v4l2codecs: Detect missing M2M_HOLD_CAPTURE_BUF
Produce an error if we try to use the feature of holding capture buffer
but it is not supported by the driver. Ingoring this can lead to stalls
as the driver will run-out of capture buffer to decode into. This
affects slice decoders but also split-field interlaced decoding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
2022-03-25 21:40:28 +00:00
Nicolas Dufresne
efa360ce82 v4l2codecs: h264: Set other field poc if available
Whenever the other field POC is available, pass it back to the
driver. This should not be strictly required, but it makes things
easier to debug and more forgiven.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
2022-03-25 21:40:28 +00:00
Nicolas Dufresne
dcd62c35f0 v4l2codecs: Trace request by it FD
This helps when crossing the debug logs with the kernel logs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
2022-03-25 21:40:28 +00:00
Nicolas Dufresne
d24dc74170 v4l2codecs: h264: Fix dpb entry flag FLAG_FIELD
The logic to guess back this value was broken. Use the value
now saved into the picture instead. This was tested using
LibreELEC patched 5.15 kernel, and fixed the interlaced decode
issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
2022-03-25 21:40:28 +00:00
Thibault Saunier
25819c41fb navigation: Add support for key Modifiers in all relevant events
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2010>
2022-03-25 15:16:03 +00:00
He Junyan
b2a00dff07 va: h265dec: Fix a crash because of missing reference frame.
Some problematic H265 stream may miss the reference frame in the DPB,
and get some message like: "No short term reference picture for xxx".
So there may be empty entries in ref_pic_list0/1 when passing to
decode_slice() function of sub class. We need to check the NULL pointer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2018>
2022-03-25 13:12:46 +00:00
Seungha Yang
769800ad5f qsvencoder: Clear caps after debug print
Otherwise debug function will print (null) for alread cleared pointer

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2012>
2022-03-24 02:55:49 +09:00
Seungha Yang
188382ca9a qsvh264enc: Fix profile and level setting in codec data
The profile field in SPS is located after header byte

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2012>
2022-03-24 02:55:31 +09:00
Seungha Yang
60735deded nvcodec: Add new Direct3D11/CUDA mode encoder implementation
Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11
input support and re-written nvcuda{h264,h265}enc elements.
Newly writeen elements have some differences compared with old
nv{h264,h265}enc including non-backward compatible changes.

* RGBA is not a supported input format any more:
  New elements will support only YUV formats to avoid implicit conversion
  done by hardware. Ideally it should be done by upstream element
  in order to have more control on it. Moreover, RGBA support can cause
  redundant RGBA -> YUV conversion if multiple encoders are
  used for the same RGBA input
* Subsampled planar format support is dropped:
  I420 and YV12 format are not supported formats for Direct3D11.
  Although it's supported in CUDA mode, it's not a hardware friendly
  memory layout and it will waste GPU memory since UV planes
  will have large padding due to the memory layout requirement of NVENC.
* GL support is dropped: Similar to the RGBA case,
  GL support in encoder would be suboptimal if GL input is
  used by multiple encoders, because each encoder will copy GL memory
  into CUDA memory.
  Upstream cudaupload element can be used for GL <-> CUDA
  interop instead.
* No more pre-allocation of encoder input surfaces. New implementation
  will use input CUDA memory without copy (zero-copy) or
  will copy into a NVENC's input buffer struct in case of
  system memory input.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
2022-03-23 13:48:53 +00:00
Vivienne Watermeier
6c2f6c3bd4 all: Use new navigation interface and API
Use and implement the new navigation interface in all relevant sink elements,
and use API functions everywhere instead of directy accessing the event structure.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
2022-03-23 13:14:52 +00:00
Tong Wu
2a703678c0 msdkenc: add macro definitions to avoid the gst-inspect error
Since the strings are empty for GST_MSDK_CAPS_MAKE_WITH_DMABUF_FEATURE
and GST_MSDK_CAPS_MAKE_WITH_VA_FEATURE, when excuting
gst-inspect-1.0.exe msdkh265enc, there will be convert static caps error
because of the extra semicolon between two empty strings. Now macro
definitions are added to avoid this issue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2004>
2022-03-23 04:34:06 +00:00
Mengkejiergeli Ba
d8ab85c3ef msdkdec: Check width and height of mfxVideoParam before allocation
DecodeHeader must be called to fill the mfxVideoParam before allocation,
and thus the check for width and height in mfxVideoParam is necessary.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1817>
2022-03-22 05:22:09 +00:00
Benjamin Gaignard
98cb44ffc6 v4l2codecs: Fix memory leak
Free pending_requests array when releasing decoder to avoid memory leak

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2000>
2022-03-21 16:06:05 +00:00
Daniel Almeida
9a364464f0 av1decoder: Sync duplicate_picture with VP9 one
Pass the current frame to the duplicate_picture callback. This makes it easier
to set the frame's output_buffer if we already have one available. Also
documented that unlike VP9, it is not optional to implement this as the
picture will populate the DPB if it is a key-frame. To ensure this, remove the
default implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1992>
2022-03-21 15:10:01 +00:00
Seungha Yang
0c6125bad6 meson: va: Define GST_USE_UNSTABLE_API
Remove extra_c_args which is not defined in this meson file at all,
and define GST_USE_UNSTABLE_API to avoid build warnings

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1999>
2022-03-21 22:17:00 +09:00
Jakub Adam
90eadae350 d3d11: Fix some typos
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1985>
2022-03-19 00:19:41 +00:00
Jakub Adam
df55700f44 d3d11screencapturesrc: Allow capturing screen sub-area
Adds crop-x, crop-y, crop-width, crop-height properties specifying the
screen area to capture.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1932>
2022-03-18 13:56:51 +01:00
Seungha Yang
c08ce58753 nvcodec: Move CUDA <-> GL, D3D11, NVMM copy function to utils
This method can be used in other elements as well.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1945>
2022-03-15 21:51:50 +00:00
Seungha Yang
b3df58add1 nvh265sldec: Add support for delayed output
Delay 4 frames in case of non-live to improve throughput

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1937>
2022-03-15 21:08:06 +00:00
Seungha Yang
e270e2967f nvenc: Fix deadlock because of too strict buffer pool size
The pool size might need to be larger than encoding surface pool size.
Also, because we always copy input frame into internal CUDA memory,
there's no reason to restrict max size of buffer pool.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1939>
2022-03-12 16:44:44 +00:00
He Junyan
50a481939d va: Fix a regression because of "Invert video codec frame dependency".
1. Always set the according GstVaH264EncFrame pointer when GstVideoCodecFrame
   pointer is assigned, which can make the logic safe.
2. Fix the forgotten change in _sort_by_frame_num. Its input pointer now is
   GstVideoCodecFrame type.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1935>
2022-03-12 15:20:19 +00:00
Seungha Yang
aa476452fb codecs: Rename picture clear functions
Our convention for clear method is gst_clear_foo_bar().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1897>
2022-03-11 20:20:17 +00:00
Seungha Yang
423111480c nvh265sldec: Always fill SPS/PPS related parameters
Address compare was not a valid approach since it works
only if SPS/PPS id are changed. Otherwise it will always point to
the same address of member variables of h265parser.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1931>
2022-03-11 16:14:14 +00:00
Corentin Damman
1fb3e35708 cudamemorycopy: add D3D11 resource support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1807>
2022-03-10 18:08:10 +00:00
Corentin Damman
1568db2c3e cudacontext: find associated DXGI Adapter LUID
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1807>
2022-03-10 18:08:10 +00:00
Corentin Damman
895f11401d cudautils: add support of D3D11 resource as Cuda graphics resource type
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1807>
2022-03-10 18:08:10 +00:00
Corentin Damman
f76ecf1e63 cudaloader: add D3D11 API
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1807>
2022-03-10 18:08:10 +00:00
Seungha Yang
5d298b98da nvh264dec,nvh265dec: Fix broken key-unit trick and reverse playback
On GstVideoDecoder::{drain,flush}, we send null packet with
CUVID_PKT_ENDOFSTREAM flag to drain out decoder. Which will
reset CUVID parser as well.
To continue decoding after the drain, the next input buffer
should include sequence headers otherwise CUVID parser will
not report any decodeable frame.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1911>
2022-03-10 12:40:05 +00:00
Víctor Manuel Jáquez Leal
838fe24e78 vah264enc: Invert video codec frame dependency.
Instead of using GstMiniObject to hold H264 frame, now it uses a plain
structure. Besides, instead of holding a reference to
GstVideoCodecFrame, the H264 frame structure is set as a
GstVideoCodecFrame user data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1856>
2022-03-09 12:57:30 +00:00
Seungha Yang
496b77e6aa cudamemorycopy: Fix GL resource leak
Clear GL resources on stop()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1896>
2022-03-08 18:02:25 +00:00
Seungha Yang
34c6063769 decklink: Update SDK version to 12.2.2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1883>
2022-03-08 10:16:29 +00:00
Seungha Yang
4aa516f305 cudamemorycopy: Remove texture-target caps field
It's GL specific field, and we can remove it unconditionally

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1865>
2022-03-07 19:05:29 +00:00
Seungha Yang
e5132a8508 cudaupload,cudadownload: Add support for dGPU NVMM
Implement NVMM <-> CUDA, GL, SYSTEM memory conversion. Jetson is
not supported yet. Note that NVMM <-> GL interop on Jetson platform
is supported by GstGL

Some example pipelines are:
- Convert NVMM to GstGL memory
  nvv4l2decoder ! "video/x-raw(memory:NVMM)" ! cudadownload ! "video/x-raw(memory:GLMemory)" ! glimagesink

- Upload system memory to NVMM and encode
  video/x-raw,format=NV12 ! cudaupload ! "video/x-raw(memory:NVMM)" ! nvv4l2h264enc

- Convert NVMM to GstCUDA memory and encode
  nvvideoconvert ! "video/x-raw(memory:NVMM)" ! cudaupload ! "video/x-raw(memory:CUDAMemory)" ! nvh264enc

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1865>
2022-03-07 19:05:29 +00:00
Víctor Manuel Jáquez Leal
0c7fe80387 va: encoder: Don't preallocate reconstruct buffers.
It's not required by VA to register the reconstruct buffers at context
creation, just as in decoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1857>
2022-03-07 16:31:41 +00:00
Seungha Yang
a63d1cf4c4 cudamemorycopy: Fix build when gl is disabled
Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1707
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1868>
2022-03-07 10:22:21 +00:00
Mengkejiergeli Ba
c9aa529484 msdkdec: Fix to not trigger SFC scaling when vpp at downstream
When there is vpp scaling downstream, we need to make sure SFC is not
triggered because vpp may fall into passthrough mode which causes
the decoder negotiation to create src caps with vpp scaled width/height.

This patch includes bitstream's original size in first query with
downstream in gst_msdkdec_src_caps, which is the same for what we do for
color format in this query. This is to ensure SFC scaling starts to
work only when downstream directly asks for a different size instead of
through vpp.

Note that here SFC scaling follows the same behavior as msdkvpp:
if user only changes width or height, e.g. dec ! video/x-raw,width=xx !,
the height will be modified to the value which fits the original DAR.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1838>
2022-03-07 07:26:40 +00:00
Seungha Yang
30ddb0cd97 nvcodec: Add missing null check in context sharing code
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
c31bf2db4d nvcodec: Refactor cudaupload/download and add support for GL memory
* Implement new baseclass GstCudaMemoryCopy to remove duplicated
  cudaupload/download code
* Add support for CUDA <-> GL memory conversion via cudaupload/download

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
111b2c3f53 nvcodec: Refactor GstCudaMemory abstraction
* Hide GstCudaMemory member variables
* Make GstCudaAllocator object GstCudaContext independent
* Set offset/stride of memory correctly via video meta
* Drop GST_BUFFER_POOL_OPTION_VIDEO_ALIGNMENT support.
  This implementation actually does not support custom alignment
  because we allocate device memory via cuMemAllocPitch
  of which alignment is almost uncontrollable

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
ad0e7fca14 nvcodec: Refactor basetransform subclasses
* cudaupload/download
  - Specify only formats actually we can deal with
    nvcodec elements, not all video formats
  - Supports CUDA output for download and input for upload in order
    to make passthrough possible, like other upload/download elements.
* cudabasetransform
  - Reset conversion element if upstream CUDA memory
    holds different CUDA context and the element can accept it.
    This is the same behavior as corresponding d3d11 filter elements.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
89bbcf0061 cudabufferpool: Move GstCudaContext object to public member
... so that plugins can understand assosicated cuda context with the
pool.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
c8a1c953d8 cudacontext: Require explicit gpu id instead of auto (-1)
Sync up with GstD3D11Device implementation. The auto stuff should
be handled in context sharing step, not device creation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
1b9274307a nvcodec: Indent update
... to prevent gnu indent version dependent diffs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Seungha Yang
cec7ac2a1b cudacontext: Remove unnecessary cuInit() call
It's already called at plugin init time

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
2022-03-06 15:39:04 +00:00
Víctor Manuel Jáquez Leal
e42d10431d va: basetransform: Add device-path read-only property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1844>
2022-03-04 14:34:32 +00:00
Víctor Manuel Jáquez Leal
47a95dfd65 va: basedec: Add device-path read-only property.
And elements will notify the used device-path if display is DRM.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1844>
2022-03-04 14:34:32 +00:00
Víctor Manuel Jáquez Leal
72c6a3b95a vah264enc: Remove GST_PARAM_CONDITIONALLY_AVAILABLE.
Since it's used only when the property is conditionally installed, and
these parameters are always installed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
He Junyan
be24cdb150 va: encoder: Clean dead code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
Víctor Manuel Jáquez Leal
7aa597d6df va: encoder: Fix error code path when open.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
Víctor Manuel Jáquez Leal
81c00664a2 vah264enc: Remove preferred_output_delay.
In the current state of the encoder it's just dead code.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
Víctor Manuel Jáquez Leal
1a19a835a9 vah264enc: Avoid mapping coded buffer twice.
Currently for copying the coded buffer onto a GStreamer buffer, the
coded buffer is mapped two times: one for getting the size, and later
for do the actual copy. We can avoid this by doing directly in the
element rather than in the general encoder object.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
Víctor Manuel Jáquez Leal
81b99c37d8 vah264enc: Single parameter array per picture.
There's no need, at least in H.264, to hold a global parameter array,
since there's no need to submit SPS, trellis, hdr or quality in every
buffer, but only on IDR ones.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
Víctor Manuel Jáquez Leal
72b0f8ab17 va: Fix log message
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
2022-03-04 12:41:37 +00:00
Mengkejiergeli Ba
8a598deef2 msdkenc: Change default ref frames number as 0
When user does not set ref-frames in pipeline, we should let MediaSDK
decide the reference frame number via setting default value as 0 at
gstreamer side.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1839>
2022-03-04 01:05:30 +00:00
Seungha Yang
8e0ce6b125 meson: wic: Fix typo
Should check WIC build option, not MediaFoundation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1847>
2022-03-04 04:18:06 +09:00
Seungha Yang
00f773bd10 qsv: Remove strcpy for DRM device path
Simplify code. It's just one-time allocation, so don't need to worry
about leaking.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1835>
2022-03-03 11:29:33 +00:00
Seungha Yang
799616aea9 msdk: Don't print error log for missing DRM device path
It's expected in case that such DRM device is unavailable for some reasons,
specifically non-Intel platform or so

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1836>
2022-03-03 06:29:11 +00:00
Seungha Yang
f8016687a4 wic: Add support for JPEG and PNG decoding
Adding Windows Imaging Component (WIC) plugin with JPEG/PNG decoding
support.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1605>
2022-03-03 00:00:54 +00:00
Seungha Yang
df6624bf1c directshow: Fix for division by zero
The AvgTimePerFrame value may be unknown. Use arbitrary
value (30 fps) instead of crashing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1828>
2022-03-02 19:35:49 +00:00
Seungha Yang
c4ac657364 qsv: Add H.264 decoder
Initial decoder implementation with baseclass

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1786>
2022-03-01 21:24:07 +00:00
He Junyan
1f2f135cdb va: enable the H264 encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
He Junyan
f17357f759 va: Add H264 encoder.
This a new VA-API implementation of a H264 encoder.

It can control the GOP and parameter settings, while the MV searching,
VCL and the rate control algorithm are implemented by VA drivers and HW.
It supports most of the common usage options in H264, but still lacks
of look ahead, field, B frame weighted prediction, etc.

Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
He Junyan
736a0ac9b0 va: Add a common encoder object.
As the counterpart of the va decoder, this class handles all the
common logic for the encoding routine and miscellaneous queries about
encoding.

Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
He Junyan
fb644e84fa va: Add vacompat.h to wrap glib functions.
The g_queue_clear_full() and g_array_copy() functions in the glib
may not be available for the current glib version check, so we add
helper functions to wrap it.
This should be deleted after the glib version bumps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
He Junyan
57d50a941f va: Add the profile string name into the profile_map.
We also add a helper function of gst_va_profile_from_name to get
the VA profile value by its profile string name.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
He Junyan
e0b6c6678b va: Change the H264 profile string order in the profile_map.
The first one should be the one that matches the VA profile's name
most precisely.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
He Junyan
83408cfdc8 va: caps: Expose gst_va_create_coded_caps as helper function.
And allow free indentation for array declaration.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
2022-03-01 10:53:50 +01:00
jinsl00000
ef4cc9e637 ipcpipeline: fix crash and error on windows with SOCKET or _pipe()
The fd was in different meanings on windows:
POSIX read and write use the fd as a file descriptor.
The gst_poll use the fd as a WSASocket.

This patch use WSASocket as default on windows. This is a temporary measure, because IPC has many different implement. There may be a better way in the future.

See #1044

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1791>
2022-03-01 06:31:51 +00:00
Wu Tong
c60ac7a04b MSDK: Add _context_query() and avoid compile error on Windows
To avoid compile error on Windows, macro definitions are added to suppress va
variables. In the meantime, add function _context_query() to query
context on Windows.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1693>
2022-02-28 12:54:23 +00:00
Mengkejiergeli Ba
b41c70aed5 msdkdec: Fix uninitialized variables
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1731>
2022-02-25 03:11:29 +00:00
Mengkejiergeli Ba
e1090c152c msdk: Fix unchecked return values
There are several calls of gst_video_info_from_caps and gst_video_frame_copy
without checks for the returned values. This patch adds all necessary
function return checks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1738>
2022-02-25 02:04:20 +00:00
Seungha Yang
ad73f73356 qsvencoder: Fix caps leak in Linux build
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1769>
2022-02-22 12:55:26 +00:00
Seungha Yang
20328914dc qsv: Fix debug category name of qsvallocator
Remove gst prefix to make $env:GST_DEBUG="qsv*:6" work for qsvallocator
as well

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1769>
2022-02-22 12:55:26 +00:00
Dmitry Osipenko
248f143fa3 v4l2codecs: Support YUV420M format
YUV420M format of V4L essentially is I420 with separate memory planes.
It's used by NVIDIA Tegra V4L decoder. Support this format by v4l2codecs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1727>
2022-02-21 21:58:19 +03:00
Seungha Yang
8ff5f10a40 d3d11screencapturesrc: Use staging buffer pool for performance
By using staging pool/buffer, we can avoid per frame
staging texture -> system memory copy.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1756>
2022-02-20 23:43:18 +00:00
Nicolas Dufresne
8883809ef9 v4l2codecs: Enable MediaTek MM21 (NV12_16L32S)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Nicolas Dufresne
3005dbc55a v4l2codecs: Add support for multi planar buffers
V4L2 have some pixel formats that produces 2 dmabuf, this add
support for these format.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Nicolas Dufresne
bab9041c4b Port plugins to gst_video_format_info_extrapolate_stride()
This reduces code duplication and simplify addition of new
pixel formats into related plugins.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
2022-02-20 22:32:55 +00:00
Seungha Yang
d49454123e winscreencap: Remove dxgiscreencapsrc element
We have the d3d11screencapturesrc element in d3d11 plugin
which is obviously better than this element in terms of performance
and design, so we don't need to make people be confused by two separate elements.

Let's pick the better implementation and remove unnecessary one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1750>
2022-02-20 20:04:05 +00:00
Seungha Yang
c19d0db454 directshow: Fix build warnings
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1744>
2022-02-19 19:54:52 +00:00
Seungha Yang
7eedd52510 directshow: Merge plugins into single directshow plugin
... and lower rank of dshowvideosink and dshowdeviceprovider
to GST_RANK_MARGINAL since we don't prefer this plugin
by default

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1744>
2022-02-19 19:54:52 +00:00
Seungha Yang
d94d338bd5 directshow: Remove white spaces
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1744>
2022-02-19 19:54:52 +00:00
Nicolas Dufresne
cf3d64129b v4l2codecs: vp9: Fix reset_frame_context parameter
It was assumed that the kernel parameters would match with the bitstream value
but instead the author when with another set of value. Surprisingly, this
makes no difference with the resulting fluster score.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1748>
2022-02-18 23:55:59 +00:00
Nicolas Dufresne
5a9df9e850 v4l2codecs: vp9: Only fill compressed headers if needed
Fixes: 13944cf3ee ("v4l2codecs: vp9: Make compressed hdr control optional")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1748>
2022-02-18 23:55:59 +00:00
Tim Mooney
54a1f60077 v4l2: include <sys/ioccom.h> on Illumos
Needed for _IOR/_IORW

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1524>
2022-02-18 21:34:49 +00:00
Loic Le Page
e1c0628bb9 Add build files and fix build for gst-plugins-bad dshowsinkwrapper plugin
dshowsinkwrapper plugin is the old dshowvideosink plugin that has been
renamed to be compliant with the actuel plugin name in the source code.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1577>
2022-02-18 14:59:25 +01:00
Loic Le Page
b355345ef5 Add build files and fix build for gst-plugins-bad dshowsrcwrapper plugin
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1577>
2022-02-18 14:59:25 +01:00
Loic Le Page
587b2e6bcb Add build files and fix build for gst-plugins-bad dshowdecwrapper plugin
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1577>
2022-02-18 14:59:25 +01:00
Loic Le Page
42bdeaf52c Add directshow strmbase library source code from Microsoft repo
Original repo is here:
https://github.com/microsoft/Windows-classic-samples

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1577>
2022-02-18 14:59:25 +01:00
Loïc Le Page
42c6a26aea Move all directshow plugins to the same sub-folder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1577>
2022-02-18 14:59:24 +01:00
Tim Mooney
97720dabe0 meson: check for libsocket and libnsl
If present, add '-lsocket' and '-lnsl' to network_deps.

ext/curl/meson.build: add network_deps to dependencies
gst/festival/meson.build: same
sys/shm/meson.build: same

Fixes linking issues on Illumos distros.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1525>
2022-02-17 18:44:49 +00:00
Seungha Yang
04b8dfa391 d3d11: Add support for AYUV, AYUV64, and RGBA64_LE formats
Note that AYUV and AYUV64 formats will be used to expand format
support, especially some packed YUV formats (e.g., Y410, YUY2)
are common DXGI formats used for hardware decoder/encoder on Windows
but those formats cannot be used as a render target. We need to handle
them differently without pixel shader help, using compute shader
for example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1699>
2022-02-16 18:41:05 +00:00
Seungha Yang
dd906f9610 d3d11: Store device format in struct
Holding pointer to struct was unsafe approach because
the pointer to d3d11 format will be invalidated once d3d11 device
object is released

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1699>
2022-02-16 18:41:05 +00:00
Seungha Yang
e1f0687b09 meson: Do hard build error for some MSVC warnings
Handle various MSVC warnings as errors for development version.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1006>
2022-02-16 17:03:29 +00:00
Dmitry Osipenko
b757d12cff v4l2codecs: h264: Correct scaling matrix ABI check
Scaling matrix V4L UAPI control not presents on NVIDIA Tegra, the default
matrix should be used in this case. Mark scaling matrix presence optional.

Fixes: 47bfa71530 ("v4l2codecs: h264: Improve ABI check ")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1726>
2022-02-16 13:16:17 +00:00
Mengkejiergeli Ba
586dfab9bd msdkdec: Enable SFC scaling for AVC and HEVC
Decoder SFC only supports down-scaling at most to 1/8.
For example, given a 4K bistream, SFC can scale it to 1080p via:
"msdkh265dec ! video/x-raw,width=1920,height=1080 ! glimagesink"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1444>
2022-02-16 08:26:46 +00:00
Mengkejiergeli Ba
c5f0e075e2 msdkdec: Enable SFC csc for AVC and HEVC
Decoder SFC will be triggered when default output format is not accept at
downstream. One use case below can work without using msdkvpp:
"! msdkh265dec ! "video/x-raw,format=BGRA" ! glimagesink",

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1444>
2022-02-16 08:26:46 +00:00
Mengkejiergeli Ba
eb742c8ed0 msdkdec: Add SFC codes
SFC refers to Scaler Format Converter, more details here:
https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-kbl-vol15-sfc.pdf
By attaching mfxExtDecVideoProcessing buffer to mfxVideoParam, decoder
can do SFC for csc and scaling.

MSDK will check if surface bitdepth equals to input when no SFC is
triggered, which means in the case of SFC, there is no need to update
surface bitdepth via gst_msdk_update_mfx_frame_info_from_mfx_video_param.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1444>
2022-02-16 08:26:46 +00:00
Seungha Yang
dbda4cf409 d3d11converter: Fix for missing GRAY conversion
Add missing Y410 -> GRAY and GRAY -> semi-planar conversion

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1724>
2022-02-16 02:30:01 +09:00
Seungha Yang
98345a141a d3d11converter: Don't use FIXME_OBJECT for non-GstObject
... and print ERROR messages for unexpected input/output formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1724>
2022-02-16 02:27:53 +09:00
He Junyan
24c3e0fcfa va: Delete the display lock/unlock when we call VA-API.
According to the VA-API's description, they are MT-safe, we do not
need to care about that in our middleware layer. The lock/unlock
operations have overhead and make the performance lower.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1333>
2022-02-15 10:02:08 +00:00
Seungha Yang
e3e23a2c84 d3d11converter: Fix RGB to GRAY conversion
Fix typo in shader code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1697>
2022-02-14 17:49:54 +00:00
Seungha Yang
27246ebeb0 d3d11download: Fix decide_allocation
Caps should be parsed in any cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1691>
2022-02-14 10:48:31 +00:00
He Junyan
fa4dc3470f meson: va: Add va option check into plugin's build.
Because the liblibgstva is built unconditionally, we now move the
va option check into va plugin's build.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1685>
2022-02-14 06:30:56 +00:00
He Junyan
1eed9de0bb vavpp: Fix the caps leak in the transform_caps() function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1689>
2022-02-12 20:11:46 +08:00
Seungha Yang
e96687d88d d3d11: Update build-time dependency
Remove all the d3d11 and dxgi header version dependent ifdef
and bump the minimum requirement to d3d11_4.h and dxgi1_6.h.
We are already failing support old Visual Studio (Windows SDK actually)
such as Visual Studio 2015. Note that our MinGW toolchain satisfies
the requirement.

From runtime point of view, this change should be fine since
we are checking OS version with IUnknown::QueryInterface()
everywhere in order to check API availability

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1684>
2022-02-11 20:01:52 +00:00
He Junyan
248baef400 MSDK: Import VA surface as encoder's input.
We make all MSDK encoders declare "memory:VAMemory" feature. Then
the pipeline such as:
  gst-launch-1.0 -vf filesrc location=xxx.h264 ! h264parse ! \
       vah264dec ! msdkh265enc ! fakesink
will choose VA memory caps between the VA decoder and MSDK encoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
ef5f6ab5d9 MSDK: Add helper function to peek VA surface of VA kind gstbuffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
26172123e5 MSDK: Handle context query into the encoder's query function.
The MSDK encoder's query function is not set and it just forwards
all query to its base class. We now need to answer the context
query correctly. Other VA plugins need to query the VA display.

By the way, the current query of "gst.msdk.Context" is also missing.
The other MSDK elements must depend on the bin's context message(
sent in context_propagate()) to set their MsdkContext correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
2928b14b69 MSDK: Handle context query into the VPP's query function.
The MSDK VPP's query function is not set and it just forwards
all query to its base class. We now need to answer the context
query correctly. Other VA plugins need to query the VA display.

By the way, the current query of "gst.msdk.Context" is also missing.
The other MSDK elements must depend on the bin's context message(
sent in context_propagate()) to set their MsdkContext correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
db5be289c7 MSDK: Handle context query into the decoder's query function.
The MSDK decoder's query function is not set and it just forwards
all query to its base class. We now need to answer the context
query correctly. Other VA plugins need to query the VA display.

By the way, the current query of "gst.msdk.Context" is also missing.
The other MSDK elements must depend on the bin's context message(
sent in context_propagate()) to set their MsdkContext correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
6635852c40 MSDK: Add a handle_context_query() helper function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
85664b5af6 MSDK: Improve the GstContext setting logic.
We now can use the gst va lib's display to create our MSDK context,
and use its helper functions to simplify our code. The improved logic
is like this:
1. Every MSDK element should use gst_msdk_context_find() to find a MSDK
context from neighbour. If valid, reuse it.
2. Use gst_msdk_ensure_new_context(). It will first query neighbours
about the GstVaDisplay, if found(e.g. some VA element is connected),
use gst_msdk_context_from_external_display() to create a MSDK context.
3. Then, creating the MSDK context from scratch. It creates both the
display and MSDK context.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
a905e7474b MSDK: Add new_with_va_display() helper function to create context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
a9aa522e26 MSDK: Use the VA display object to replace the raw display handle.
The VA display object from VA lib is a common defined object. which
contain the whole display things. It is easier to use, and more important,
we can share it with the other VA plugins and keep all the VA related
plugins working on the same GPU device.
We also delete the useless gst_msdk_context_get_fd() API.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
He Junyan
c7e3c8e9f6 MSDK: Add the gst va lib into MSDK's dependency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
2022-02-11 07:13:45 +00:00
Seungha Yang
2c93afd8bb mediafoundation: Add support for MP3 decoding
See also
https://docs.microsoft.com/en-us/windows/win32/medfound/windows-media-mp3-decoder

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1596>
2022-02-11 04:16:23 +09:00
Seungha Yang
be957f6c61 mediafoundation: Add support for AAC decoding
See also
https://docs.microsoft.com/en-us/windows/win32/medfound/aac-decoder

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1596>
2022-02-11 04:16:22 +09:00
Seungha Yang
0b26254a6a mediafoundation: Cosmetic changes
Rename baseclass to be consistent with other Windows plugins

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1596>
2022-02-11 04:16:22 +09:00
Seungha Yang
ce4875ccde mediafoundation: Use & operator instead of GetAddressOf()
Use shorter expression

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1596>
2022-02-11 04:16:22 +09:00
Seungha Yang
36020c7549 mediafoundation: Port to C++
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1596>
2022-02-11 04:16:15 +09:00
Seungha Yang
c7a9b5c458 d3d11decoder: Promote rank to primary except for mpeg2
Our D3D11/DXVA codecs implementation has been verified
during 1.18 and 1.20 development cycle and also via the Fluster
test framework. Similar to the case of nvdec and vtdec,
we can prefer hardware over software in most cases

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1672>
2022-02-10 17:16:18 +00:00
Nicolas Dufresne
7a9e11ae1b v4l2codecs: vp9: Fix duplicating a duplicated picture
Duplicating a picture what was already a dup was leading to a crash. Rename
the custom picture flags as HOLDS_BUFFER to make its meaning clear. Then save
then ref and store the picture as userdata, so it can be obtained when
duplicating. Finally, mark the doplicated as HOLDS_BUFFER to avoid thinking it
holds a request.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1681>
2022-02-09 22:37:55 +00:00
Seungha Yang
090b50e549 mfaudioenc: Handle empty IMFMediaBuffer
IMFMediaBuffer may not hold encoded data, which seems to happen
while draining.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1679>
2022-02-10 01:49:55 +09:00
Víctor Manuel Jáquez Leal
b3c71584e0 va: decoder: Log profile name.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1675>
2022-02-09 12:25:24 +01:00
Víctor Manuel Jáquez Leal
df6c985474 va: filter: Log the added filter name.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1675>
2022-02-09 11:07:47 +00:00
Víctor Manuel Jáquez Leal
4be3413fec vapostproc: Process HDR caps
This patch adds a new parameter: hdr-tone-mapping (same as
vaapipostproc), if the HDR capabilites are availabe in driver, and
it's disabled by default.

If hdr-tone-mapping is enabled then HDR fields in sink caps are
processed in frames from HDR to SDR, removing those hdr fields in
source pad caps too.

hdr-tone-mapping is not enabled if a color conversion is also
requested, since it fails to process in the iHD driver, so far.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1258>
2022-02-09 10:26:02 +00:00
Víctor Manuel Jáquez Leal
0e7dade55a build: Add libva dependency fallback.
Then libva can be subproject and used by either gstreamer-vaapi,
va and msdk in gst-plugins-bad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1397>
2022-02-09 09:45:04 +00:00
Nicolas Dufresne
13944cf3ee v4l2codecs: vp9: Make compressed hdr control optional
This is to supported by Mediatek VP9 driver. Mediatek handles
the forward probabilities in hardware hence does not need and
does not implement support for
V4L2_CID_STATELESS_VP9_COMPRESSED_HDR.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1600>
2022-02-08 16:46:09 -05:00
Víctor Manuel Jáquez Leal
5e4c152de4 va: Remove libgudev crumbs in library.
In commit e699aaeb we moved linking of libgudev to the plugin rather
the library, because it's only used in the plugin. But the dependency
check is still done in library.

This patch removes the dependency check in library, and updates the
dependency check in plugin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1650>
2022-02-08 16:22:42 +00:00
Seungha Yang
8773ba1104 msdk: Fix for MFXUnload symbol re-definition build error
Fix for libgstreamer-full build

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
278908ce96 qsv: Add support for HEVC encoding
main and main-10 profiles are supported for now

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
3a7e4635bb qsv: Add support for VP9 encoding and more video formats
Add VP9 encoder with 4:2:0 8 bits and 4:4:4 8/10 bits formats support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
64ed6075b7 qsv: Introduce H.264 Intel Quick Sync Video Encoder
A new implementation of Intel Quick Sync Video plugin.
This plugin supports both Windows and Linux but optimization for
VA/DMABuf is not implemented yet.

This new plugin has some notable differences compared with existing
MSDK plugin.

* Encoder will expose formats which can be natively supported
without internal conversion. This will make encoder
control/negotiation flow much simpler and cleaner than
that of MSDK plugin.

* This plugin includes QSV specific library loading helper,
called dispatcher, with QSV SDK headers as a part of this plugin.
So, there will be no more SDK version dependent #ifdef in the code
and also there will be no more build-time MSDK/oneVPL SDK
dependency.

* Memory allocator interop between GStreamer and QSV is re-designed
and decoupled. Instead of implementing QSV specific allocator/bufferpool,
this plugin will make use of generic GStreamer memory
allocator/bufferpool (e.g., GstD3D11Allocator and GstD3D11BufferPool).
Specifically, GstQsvAllocator object will help interop between
GstMemory and mfxFrameAllocator memory abstraction layers.

Note that because of the design decision, VA/DMABuf support is not made
as a part of this initial commit. We can add the optimization for Linux
later once GstVA library exposes allocator/bufferpool implementation as
an API like GstD3D11.

* Initial encoder implementation supports interop with GstD3D11
infrastructure, including zero-copy encoding with upstream D3D11 element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
c80132e4a3 qsv: Remove unnecessary pargma message
We know what we are doing, just remove noisy build warnings

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
81d63948d1 qsv: Import libmfx API and dispatch code from oneVPL project
Copied from oneVPL project (https://github.com/oneapi-src/oneVPL)
v2022.0.3 tag at the commit of efc259f8b7ee5c334bca1a904a503186038bbbdd

This is corresponding to MFX API version 2.6

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
a37da515f4 d3d11memory: Add support for ID3D11Buffer
Allow wrap ID3D11Buffer via GstD3D11Memory object
At the moment, only staging ID3D11Buffer is supported.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1408>
2022-02-08 10:05:35 +00:00
Seungha Yang
28eeba3e18 nvh265sldec: Fix for decoding 12bits stream
We've been exposing main-444-12 profile as a supported profile
in its sinkpad template but not actaully. Adding code to
covert 12 and 16 bits as well.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1612>
2022-02-07 18:27:48 +00:00
Seungha Yang
80bbc71ec0 nvdecoder: Fix for HEVC 4:4:4 format decoding
Map chroma_format_idc == 3 (which means 4:4:4 subsampling) correctly,
also pass coded bitdepth for decoder initialization instead of
inferring it from output format since they can be different.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/949
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1612>
2022-02-07 18:27:48 +00:00
He Junyan
ea9b350240 va: Add a gstva.h to include all va lib header files.
And replacing all va lib headers with this new header files
when including.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1256>
2022-02-07 10:12:36 +00:00
He Junyan
d5c535744b va: Move the vautils into the gst va lib.
The context query and handle are common logic for all va related
elements. So we move it from va plugins to the common gst va lib.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1256>
2022-02-07 10:12:36 +00:00
Seungha Yang
6434d69f8c codecs: Stop claiming constness for refcounted object
It's almost pointless and makes little sense as subclass might
want to modify refcount of the object or so. And all subclasses
are already casting them to non-const version as well.
In a general sense, we need to avoid passing refcounted object
with const qualifier.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1238>
2022-02-06 17:17:22 +00:00
Seungha Yang
499c89c729 d3d11videosink: Use staging buffer pool for non-d3d11 upstream
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1643>
2022-02-06 21:58:52 +09:00
Seungha Yang
9518f15309 d3d11upload,d3d11download: Use staging buffer pool
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1643>
2022-02-06 21:58:48 +09:00
Seungha Yang
b22aa14e43 d3d11decoder: Use staging buffer pool for non-d3d11 downstream
In specific condition, this can show about 10% ~ 30%
performance gain with non-d3d11 downstream element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1643>
2022-02-06 21:57:17 +09:00
Seungha Yang
34b54ca665 nvdecoder: Fix for display resolution setup
Display resolution should be cropped rect, not coded resolution.
Otherwise decoded output from NVDEC might be wrong.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1617>
2022-02-01 17:58:06 +00:00
Nirbheek Chauhan
bb32532f60 applemedia: Disable 64RGBALE support on older macOS
The kCVPixelFormatType_64RGBALE enum is only available on macOS Big
Sur (11.3) and newer. We also cannot use that while configuring the
encoder or decoder on older macOS.

Define the symbol unconditionally, but only use it when we're running
on Big Sur with __builtin_available().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1613>
2022-02-01 16:57:04 +00:00
Nirbheek Chauhan
6ae4497c07 applemedia: Remove some unnecessary variables
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1613>
2022-02-01 16:57:04 +00:00
Nirbheek Chauhan
67656c5eeb docs: Add objc and objcpp files to hotdoc gst_c_sources
Hotdoc should be able to extract and parse comments out of these. Just
need to be careful to only add the glob in directories that actually
contain *.m (objc) and *.mm (objcpp) files.

Also fix some doc comments and remove redundant ones.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1614>
2022-02-01 05:25:42 +05:30
Nirbheek Chauhan
f1449ac116 docs: Rename "OS X" to "macOS" in some documentation
No one uses the term "Mac OS X" anymore, it's "macOS". "OS X" is even
worse, because people will usually start the search with "mac".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1607>
2022-01-30 19:17:18 +05:30
Nirbheek Chauhan
d05fcadf4e applemedia: Document vtenc / vtdec elements
Also preserve-alpha property should only be exposed on the
vtenc_prores element since h264 does not support transparency.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-docs/-/issues/94

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1601>
2022-01-30 02:17:24 +05:30
Nicolas Dufresne
47bfa71530 v4l2codecs: h264: Improve ABI check
This moves the ABI check to the registration, so we don't expose
decoders with the wrong ABI or that are just broken somehow. It
also makes few enhancement:

- Handle missing, but required controls
- Prints the controls macro name instead of id

This should fix RK3399 support with a currently release minor
regression in the Hantro driver that cause errors.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1599>
2022-01-29 15:33:49 +00:00
Seungha Yang
ea06439c39 d3d11decoder: Fix typo in doc
s/elemenet/element/g

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1598>
2022-01-29 04:47:16 +09:00
Víctor Manuel Jáquez Leal
d86288904f vapostproc: Make cb max values symmetrical to their min values.
Intel drivers expose some colorbalance's maximum values much more
bigger than their minimum values, given their middle values (default
value). This means, in practice, that the real middle point between
the maximum and minimum values implies a major change in the color
balance, which is not expected by the GStreamer color balance logic.

This patch makes the given maximum value symmetrical to the minimum
value, given the middle one (default value).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1580>
2022-01-27 22:33:21 +00:00
Nicolas Dufresne
d7363bd838 v4l2codecs: Fix debug assertion in register functions
As now, we warn if the decoder have no support src pixel format, but that
warning is called before the type (hence the debug category) is initialized.
Fix this by moving the debug category init out of the type initialization,
into the register funcitons.

This will fix an assertion that occures in the register function and allow
relevant log to be seen by the users.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1588>
2022-01-27 18:53:41 +00:00
Seungha Yang
7b1683f6b2 d3d11av1dec: Fix typo in debug message
Fixing copy and paste mistake, It's AV1 decoder not VP8

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1576>
2022-01-27 03:11:33 +09:00
Víctor Manuel Jáquez Leal
b8068c6fda va: basetransform: Pass component index not plane index.
This is an issue detected and fixed in commit 3897b24f for other
libraries and elements.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1566>
2022-01-25 14:15:12 +00:00
Víctor Manuel Jáquez Leal
c7e52e869d va: filter & postproc: Match color with caps features.
When fixating color, there might be "other caps" with color spaces not
supported by the caps features exposed in the vapostproc's source pad
caps template (perhaps it's a bug somewhere else in GStreamer).

This solution checks if the proposed format exists in the filter
within the caps feature associated with the proposed format.

The check is done with the new filter's function
gst_va_filter_has_video_format().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1559>
2022-01-24 18:10:49 +00:00
Nicolas Dufresne
107088a658 v4l2codecs: Unify the src template caps format
Notably NV12_4L4 ended up being applied to only VP9 decoder. This fixes the
situation by using a central define for all static src pad templated formats.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/965>
2022-01-21 19:32:30 +00:00
Nicolas Dufresne
a67e9fb05f v4l2codecs: Sync kernel headers against 5.16.0
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/965>
2022-01-21 19:32:30 +00:00
Víctor Manuel Jáquez Leal
08aa930fee msdk: Avoid noisy registry when no MSDK device.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1550>
2022-01-21 11:13:55 +01:00
Seungha Yang
77225c79f9 wasapi2: Fix for device open failure on old OS
To open automatic stream routing aware device,
at least Windows10 Anniversary Update is required.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1545>
2022-01-20 23:04:46 +09:00
Seungha Yang
009bc15f33 wasapi2ringbuffer: Fix for desynced buffer-size and segsize
GstAudioRingBufferSpec::segsize has been configured by using
device period but GstWasapi2RingBuffer was referencing the
buffer size returned by IAudioClient::GetBufferSize()
which is most likely larger than device period.
Fixing to sync them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1533>
2022-01-18 03:23:17 +09:00
Seungha Yang
f97ab9edf7 d3d11deinterlace: Do not restrict minimum resolution to 64x64
The value 64 was completely arbitrary one, and this element
will be able to support smaller resolutions

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1528>
2022-01-16 02:23:55 +09:00
Seungha Yang
e63a3a7f31 d3d11compositor: Don't try to read empty buffer
The queued buffer may not be readable buffer in case that
upstream sends GAP event or so.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1497>
2022-01-13 20:27:50 +00:00
Dmitry Osipenko
644969e0ba kmssink: Support auto-detection of NVIDIA Tegra driver
NVIDIA Tegra SoCs have a separate (from GPU) display controller. It's
the primary display device on all Tegra SoCs. Add Tegra to the list
of primary DRM drivers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1514>
2022-01-13 04:50:55 +00:00
Nirbheek Chauhan
1be6d6ccf5 meson: Add explicit check: kwarg to all run_command() calls
This is required since Meson 0.61.0, and causes a warning to be
emitted otherwise:

2c079d855e
https://github.com/mesonbuild/meson/issues/9300

This exposed a bunch of places where we had broken run_command()
calls, unnecessary run_command() calls, and places where check: true
should be used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1507>
2022-01-09 18:12:47 +05:30
Nirbheek Chauhan
6b7d819c25 vtenc: Signal ignored alpha component with ProRes
When the image is opaque but the output ProRes format has an alpha
component (4 component, 32 bits per pixel), Apple requires that we
signal that it should be ignored by setting the depth to 24 bits per
pixel. Not doing so causes the encoded files to fail validation.

So we set that in the caps and qtmux sets the depth value in the
container, which will be read by demuxers so that decoders can skip
those bytes entirely. qtdemux does this, but vtdec does not use this
information at present.

The sister change was made in qtmux and qtdemux in:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/1061

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1489>
2022-01-04 18:01:54 +00:00
Seungha Yang
5fefc689a0 d3d11decoder: Negotiate again on the first output buffer
... unconditionally. There may be updated field in sinkpad caps
after the new_sequence() call (HDR related ones for example),
then we should signal the information to downstream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1474>
2021-12-30 11:09:45 +00:00
He Junyan
85d2118a53 va: av1dec: Use named profiles to replace the numeric ones.
Use named AV1 profiles (i.e., main, high, and professional) to replace
the old 0, 1, 2 profiles.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1456>
2021-12-21 22:20:34 +09:00
Seungha Yang
91484ce2ac d3d11av1dec: Update sinkpad template for profile
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1456>
2021-12-21 22:20:34 +09:00
Seungha Yang
1564567c3e d3d11av1dec: Fix for Cdef param
av1parser will increase the sec_strength values by 1 if parsed
values were equal to 3 as defined in spec. But DXVA wants unmodified
ones.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1455>
2021-12-17 23:28:29 +09:00
Seungha Yang
146815bbb6 d3d11av1dec: Sync DXVA AV1 data structure with released header
Update AV1 data structure based on Windows 11 SDK header

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1455>
2021-12-17 23:27:24 +09:00
Seungha Yang
f10867dfb5 d3d11videosink: Use only tested color space for swapchain
We are querying supported swapchain colorspace via
CheckColorSpaceSupport() but it doesn't seem to be reliable.
Use only tested full-range RGB formats which are:
- sRGB
- BT709 primaries with linear RGB
- BT2020 primaries with PQ gamma

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1433>
2021-12-12 11:00:24 +00:00
Nicolas Dufresne
e0f8ce501b v4l2codecs: vp9: Add alpha decodebin wrapper
This will allow HW accelerated decoding of WebM alpha videos.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1439>
2021-12-10 21:37:14 +00:00
Nicolas Dufresne
31d49da237 v4l2codecs: plugin: Minor style fix
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1439>
2021-12-10 21:37:14 +00:00
Nicolas Dufresne
3f02515380 v4l2codecs: decoder: Improve logging of timed out request
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1439>
2021-12-10 21:37:14 +00:00
Nicolas Dufresne
c4216a693c v4l2codecs: mpeg2: Check that the decoder output formats
This is to avoid exposing a decoder for which we don't support any
output format. This happens on platform using vendor formats or
not yet supported tiles formats.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1439>
2021-12-10 21:37:14 +00:00
Seungha Yang
e8c923ebde d3d11window: Remove hack related to color space selection
Use input GstVideoColorPrimaries without any special case handling
otherwise rendered image color would be very wrong.

The hack was added to work around an issue that some Intel driver
couldn't handle wide color gamut image without HDR10 metadata, specifically PQ image.
But device capability can be checked via a method added in
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1723
so there's no issue now.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1175
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1430>
2021-12-09 20:12:12 +09:00
Seungha Yang
1a12883993 d3d11window: Fix typo in debug message
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1430>
2021-12-09 19:51:20 +09:00
Nicolas Dufresne
7e875ddb2c v4l2codecs: mpeg2: Fix selected sizeimage
Due to a copy paste bug, the bitdepth was never set and that was leading
to requesting sizeimage of 0. Previously that worked since the driver
would in that case pick a size for us. But now the we bumped the minimum
to 4KB, the driver happily allocate 4KB of bitstream which lead to
decoding error.

As MPEG2 have a fixed bitdeph of 8, use a define instead of the run-time
variable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1415>
2021-12-03 07:55:30 -05:00
Nicolas Dufresne
05458f05e0 v4l2codecs: vp9: Drop frames on non-keyframe format change
V4L2 does not yet support this feature, this will skip over the
transition portion up to the next keyframe.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1404>
2021-12-02 15:52:03 -05:00
Nicolas Dufresne
a6eb1e7782 v4l2codecs: Fix renegotiation
If we hold the last reference to the allocator, leaving the device
streaming will cause an EBUSY error when trying to free the allocate
buffers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1404>
2021-12-02 15:45:26 -05:00
Seungha Yang
e87791592e d3d11vp9dec: Drop frames on non-keyframe format change
... in case of NVIDIA GPU

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1407>
2021-12-02 19:19:59 +00:00
Seungha Yang
2c834b5fc7 nvvp9sldec: Drop frames on non-keyframe format change
NVDEC doesn't seem to be able to handle the case

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1407>
2021-12-02 19:19:59 +00:00
Nicolas Dufresne
d04fba93f8 v4l2codecs: vp9: Remove uneeded picture data
The GstV4l2Request now holds a reference on the picture buffer and is
recounted already. This effectively removes usage of GRefCount which is only
available in GLib 2.58, while we support 2.56.

Fixes #910

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1402>
2021-11-30 17:11:59 -05:00
Nicolas Dufresne
19d99dbcae v4l2codecs: decoder: Add method to get the pic_buf
This helper will be needed for VP9 frame duplication.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1402>
2021-11-30 17:11:59 -05:00
Nicolas Dufresne
8a1440b3f1 v4l2codecs: vp9: Add missing error checks in decide_allocation
This could otherwise lead to crash.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1402>
2021-11-30 17:11:56 -05:00
Nicolas Dufresne
4ca7f1e014 v4l2codecs: h264: Fix typo in comment
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1387>
2021-11-30 00:28:34 +00:00
Nicolas Dufresne
83933b7772 v4l2codecs: h264: Properly set pic_num/frame_num
The V4L2 uAPI uses pic_num for both PicNum and ShortTermPicNum. It also
doe the same for both FrameNum and LongTermFrameIdx. This change does
not change the fluster score, but fixed a visual corruption noticed
with some third party streams.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1387>
2021-11-30 00:28:34 +00:00
He Junyan
b5c07e11ca va: Use a lock to protect the surface copy by using vpp.
If we use vpp to do the surface copy, its operation is not atomic.
 We need to maintain the filter's context unchanged during the whole
 copy progress.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1373>
2021-11-29 19:25:31 +00:00
He Junyan
954f7cf88c va: Use the GstVaSurfaceCopy of the allocator atomically.
The mem_copy() of the allocator can be called simultaneously from
different threads. We should use atomic pointer operations to create
and use the GstVaSurfaceCopy of the allocator.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1373>
2021-11-29 19:25:31 +00:00
He Junyan
7f31dcf084 va: DMA allocator: Set the copied memory properly when popped from pool.
The current code does not set the copied memory correctly when it is popped
from the surface cache pool.
1. We forget to ref the allocator, which causes the allocator to be freed
   unexpected, and we get a crash later because of the memory violation.
2. We forget to add ref_mems_count, which causes the surface leak because
   the surface can not be pushed back to the cache pool again.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1373>
2021-11-29 19:25:31 +00:00
Daniel Almeida
285695ee52 v4l2codecs: gstv4l2decoder: set minimum sizeimage
Set minimum sizeimage such that there is enough space for any overhead
introduced by the codec.

Notably fix a vp9 issue in which a small image would not have a
bitstream buffer large enough to accomodate it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1012>
2021-11-29 17:41:19 +00:00
Daniel Almeida
120b96a974 v4l2codecs: gstv4l2codecsvp9dec: implement a render delay
The v4l2 backend support delayed output for performance reasons.
It is then possible to use render delays to queue multiple requests
simultaneously, thus increasing performance.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1012>
2021-11-29 17:41:19 +00:00
Daniel Almeida
ccab90773f v4l2codecs: vp9dec: Implement VP9 v4l2 decoder
Implement a v4l2 based vp9 decoder element based on the preexisting vp8
v4l2 decoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1012>
2021-11-29 17:41:19 +00:00
Daniel Almeida
c51d74ae3a v4l2codecs: update to the new uAPI
The new VP9 stateless API is in its way to be destaged. Update our
headers to match.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1012>
2021-11-29 17:41:19 +00:00
Víctor Manuel Jáquez Leal
5e3bf0fff7 vapostproc, vadeinterlace: don't transform caps if no intersection.
If caps to transform don't intersect with those supported by the VA
filter (VAEntrypointVideoProc) then return them as is, because only
pass-through mode is the only possibility.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1369>
2021-11-22 15:27:10 +00:00
Víctor Manuel Jáquez Leal
68379649db vapostproc: Append featured caps rather than merge.
So it would be possible to honor upstream preference.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1369>
2021-11-22 15:27:10 +00:00
Víctor Manuel Jáquez Leal
718e83ed4c vapostproc: Remove dead code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1369>
2021-11-22 15:27:10 +00:00
Víctor Manuel Jáquez Leal
26040bd932 va: filter: Validate input parameter in internal function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1369>
2021-11-22 15:27:10 +00:00
Víctor Manuel Jáquez Leal
8377463128 va: allocator: log drm modifier
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1369>
2021-11-22 15:27:10 +00:00
He Junyan
a14f0da324 va: vpp: Fix the memory leak in fixate_caps().
For the BaseTransform class, the function of fixate_caps(), takes
the ownership of "othercaps". So we should clear it in our subclass.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1372>
2021-11-22 10:54:23 +00:00
He Junyan
c2bffe22f3 va: decoder: Also ref the display when duplicating pictures.
The _destroy_buffers() will check the display handle using the
g_return_val_if_fail. we should not generate the invalid pointer
warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1368>
2021-11-19 14:40:18 +00:00
Seungha Yang
7f796b10b2 wasapi2: Fix typo in doc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1360>
2021-11-19 13:38:19 +00:00
Seungha Yang
6acf89b3d3 mediafoundation: Skip doc for non-default encoder elements
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1360>
2021-11-19 13:38:19 +00:00
Seungha Yang
7fe08d8bed d3d11: Stop doc for non-default decoder and deinterlacer elements
Just skip doc for non-default decoder/deinterlacer elements
since there are multiple element in case that system has
multiple GPUs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1360>
2021-11-19 13:38:19 +00:00
Wonchul Lee
ae7a365274 d3d11: Fix deadlock while doing unprepare
ShowWindow() could be blocked while doing gst_d3d11_window_win32_unprepare
when external window handle provided to d3d11videosink in multi-threaded
environment.
The condition that issue happened is, UI thread is waiting for a
background thread that changes d3d11videosink state to NULL, and the
background thread would try to send a window message to the queue.
The queue is already occupied by the UI thread, so the background
thread will be blocked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1366>
2021-11-19 13:42:53 +09:00
Thomas Klausner
49449dfa41 shm: NetBSD build fix
shm_unlink() and friends live in librt on NetBSD. Adapt build system.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1323>
2021-11-08 21:14:42 +00:00
Antonio Ospite
7deee582d2 magicleap: update lumin_rt libraries names to the latest official version
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1314>
2021-11-05 16:21:34 +00:00
Thibault Saunier
d0c5778669 doc: Update nvdec documentation
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/870

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1309>
2021-11-05 13:26:33 +00:00
Seungha Yang
8eee442715 wasapi2ringbuffer: Fix client object leak
Check whether ringbuffer is holding client object already since
open_device() may be called multiple times

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1307>
2021-11-04 12:41:32 +00:00
Daniel Almeida
f9958eda8e v4l2codecs: gstv4l2codecsmpeg2dec: implement a render delay
The v4l2 backend support delayed output for performance reasons.
It is then possible to use render delays to queue multiple requests
simultaneously, thus increasing performance.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1013>
2021-11-02 16:16:29 +00:00
Daniel Almeida
477b824f8e v4l2codecs: Implement a MPEG2 V4L2 decoder element
Implement a MPEG2 V4L2 decoder element based on the previous h264
implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1013>
2021-11-02 16:16:29 +00:00
Daniel Almeida
4fe6bc1afe v4l2codecs: mpeg2: update to the new uAPI
The mpeg2 stateless api has undergone changes as it is being
destage. Update the v4l2-controls header to match.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1013>
2021-11-02 16:16:29 +00:00
Daniel Almeida
f6e17ea294 sys: va: GstVaMpeg2Dec: use slice sc_offset and size
Seeing as how GstMpeg2Slice will now record the start code offset
as well as its size with the above field taken into account, the
manual computation in this class is not needed.

Remove it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1013>
2021-11-02 16:16:29 +00:00
James Cowgill
8b932c105f v4l2codecs: Handle allocator creation failure
If `VIDIOC_REQBUFS` doesn't return enough buffers the allocator creation
function can fail and return `NULL`. Handle this by generating an error
and returning instead of segfaulting.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1220>
2021-11-02 15:25:48 +00:00
James Cowgill
3846b0563a v4l2codecs: Fix segfault when destroying non-detached allocator
The GstV4l2CodecAllocator dispose function clears `self->decoder` but
the finalize function then tries to use it if the allocator has no been
detached yet.

Fix by detaching in the dispose function before we clear
`self->decoder`.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1220>
2021-11-02 15:25:48 +00:00
Nirbheek Chauhan
b8d6fd905e applemedia: Add ARGB64_BE, RGBA64_LE support to vtenc/vtdec
We can add this now that ARGB64_BE videoconvert support was added in:
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1247

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Nirbheek Chauhan
fed69c48b6 vtenc: Add FieldDetail properties for interlaced input
Standard interlace handling:
* If we have interlace-mode=interleaved and the field order, we just
  set it when creating the session
* If we have interlace-mode=(interleaved|mixed) and no field order, we
  set the field order on the first buffer

The encoder session does not support changing the FieldDetail after it
has started encoding frames, so we cannot support mixed streams
correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Nirbheek Chauhan
29a32703a5 vtenc: Add a property to forcibly ignore alpha values
This PropertyKey is not documented in any headers anywhere, so we need
to define it ourselves.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Nirbheek Chauhan
4e37f99975 vtenc: Set colorimetry information
It looks like VideoToolbox doesn't support all our colorimetries.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Nirbheek Chauhan
0f0e68080c applemedia: Add ProRes support to vtenc and vtdec
For vtdec, we continue to prefer NV12; else we pick whatever
downstream wants. In the special case where we're decoding 10-bit or
12-bit ProRes formats, we will prefer AYUV64.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Nirbheek Chauhan
db638134e7 vtenc: Improve error reporting in chain function
Otherwise it is quite difficult to figure out why the chain function
failed. Also assert not reached for case statements that should not be
hit.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Nirbheek Chauhan
d7f6f8172a vtdec: Remove dead code in switch statement
We never advertise these formats, so these cases will never be hit.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1214>
2021-11-01 09:24:52 +00:00
Víctor Manuel Jáquez Leal
4a4823b972 va: Delay decoders downstream negotiation.
Delay decoders downstream negotiation just before an output frame
needs to be allocated.

This is required, are least for H.264 and H.265 decoders, since
codec_data might trigger a new sequence before finishing upstream
negotiation, and sink pad caps need to set before setting source pad
caps, particularly to forward HDR fields. The other decoders are
changed too in order to keep the same structure among them.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1257>
2021-10-29 16:06:52 +00:00
Víctor Manuel Jáquez Leal
5494ec38d0 vabasedec: Move warning message to decoder's category.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1257>
2021-10-29 16:06:52 +00:00
Víctor Manuel Jáquez Leal
97e3f88c20 va: Move common variable need_negotiation to GstBaseDec.
This is a common variable to all decoders, so it's sound to move it to
the base helper.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1257>
2021-10-29 16:06:52 +00:00
Víctor Manuel Jáquez Leal
a2a3c81c85 va: Move back parent_object to each element.
Using GstBaseDec hack to access the parent_object of each element in
the element itself is a bit fragile. It would be better to keep its
own parent object as the usual global variable. It would make it
resistant to code changes.

The GstBaseDec macro to access the parent object now it's internal to
base decoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1257>
2021-10-29 16:06:52 +00:00
Mengkejiergeli Ba
5b1662d37e msdk: Insert hdr sei at hevc encoder
There are two HDR SEIs defined in spec: mastering display colour volume and
content light level. Add insertion of HDR SEIs when they are available
during encoding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1242>
2021-10-28 08:36:05 +00:00
Víctor Manuel Jáquez Leal
cf3d271cde vapostproc: Color fixation will choose othercaps' structure.
gst_va_fixate_format() will iterate all othercaps' structures to find
the one with less information lost at color conversion. If a structure
with same color format is found, the iteration stops. It's like a
smart truncation. Then, this function also will choose the caps
feature.

Later this structure is used fixate its size and no further truncation
is needed.

Don't intersect at fixate, since it kills possible resizing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1261>
2021-10-27 18:01:50 +00:00
Víctor Manuel Jáquez Leal
bc6a7a63f0 vapostproc: Ignore direction at orientation swapping.
It doesn't matter the direction of the negotiation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1261>
2021-10-27 18:01:50 +00:00
Víctor Manuel Jáquez Leal
cbca0bb06e vapostproc: Consider video orientation for border calculation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1261>
2021-10-27 18:01:50 +00:00
Mengkejiergeli Ba
3ca6734860 msdkvpp: Add 12bit formats
Add 12bit formats for different chroma samplings at sink pad and
src pad, including P012_LE, Y212_LE and Y412_LE.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1218>
2021-10-26 07:08:10 +00:00
Víctor Manuel Jáquez Leal
74c75b1e8b vah265dec: Fix end_picture() vmethod.
Since commit 88437a9c the signature of h265decoder's end_picture()
changed to return GstFlowReturn, but vah265dec was not updated.

This commit fixes this regression.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1248>
2021-10-25 17:01:26 +02:00
Mengkejiergeli Ba
164244a2eb va: allocator: Fix possible memory leaks
At gst_va_dmabuf_allocator_setup_buffer_full, static code analysis tool
does not know number of objects in descriptor is always larger than 0 if
export_surface_to_dmabuf succeeds. Thus, the tool will assume buf is
allocated with mem but not released when desc.num_objects equals to 0
and raise a mem leak issue.

For gst_va_dambuf_memories_setup, we should also inform the tool that
n_planes will be larger than 0 by checking the value at very beginning.
Then, the defect similar to above will not be raised during static analysis.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1241>
2021-10-25 15:03:30 +08:00
Mathieu Duponchelle
2f8030d98b nvh264enc: add constrained-baseline to the caps profiles
In practice, when baseline is requested from the encoder it
produces constrained baseline, and it is already reflected
in the profile-iop flags.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1213>
2021-10-21 09:06:08 +00:00
Seungha Yang
8b6c3e030b mediafoundation: Fix for UWP build
We don't support D3D11 interop for UWP because some APIs
(specifically MFTEnum2) are desktop application only.
However, the code for symbol loading is commonly used by both UWP and WIN32.
Just link GModule unconditionally which is UWP compatible, and simply don't
try to load any library/symbol dynamically when D3D11 interop is unavailable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1216>
2021-10-21 05:11:40 +00:00
Tim-Philipp Müller
e0f336c1b4 meson: va, msdk: simplify dep.get_variable() use
With recent Meson versions we can just write dep.get_variable('foo')
instead of dep.get_variable(pkgconfig: 'driverdir', internal: 'driverdir').

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
2021-10-20 11:20:44 +00:00
Tim-Philipp Müller
f1bb2c76c6 meson: update for dep.get_pkgconfig_variable() deprecation
... in favour of dep.get_variable('foo', ..) which in some
cases allows for further cleanups in future since we can
extract variables from pkg-config dependencies as well as
internal dependencies using this mechanism.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
2021-10-20 11:20:44 +00:00
Víctor Manuel Jáquez Leal
5c6b641ae3 vadeinterlace: Accept ANY feature.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1024>
2021-10-18 19:14:15 +00:00
Víctor Manuel Jáquez Leal
bf1b03e5cb vadeinterlace: Fixate interlace-mode and framerate accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1024>
2021-10-18 19:14:15 +00:00
Víctor Manuel Jáquez Leal
10e5db047a vapostproc: Accept ANY feature.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1024>
2021-10-18 19:14:15 +00:00
Víctor Manuel Jáquez Leal
7e53161ea5 vapostproc: Traverse caps features in gst_va_vpp_caps_remove_fields()
The previous code had a potential failure for multiple caps features. Now
each caps feature in each structure is reviewed, and if it has a supported
feature, the structure is processed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1024>
2021-10-18 19:14:15 +00:00
Víctor Manuel Jáquez Leal
c00ad9e70c vapostproc: Refactor gst_va_vpp_complete_caps_features()
gst_va_vpp_complete_caps_features() now receives the @feature_name to
add and return if @caps doesn't provide it.

So, instead of two nested loops, now the function is a single loop,
traversing @caps to find if each structure already contains the requested
@features_name.

It's important to add missing caps features with @caps, in order to
not lost information.

The function caller does the external loop by calling per each
available caps feature.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1024>
2021-10-18 19:14:15 +00:00
Víctor Manuel Jáquez Leal
d12991c979 vapostproc: Split caps transform in two phases.
In order to make more readable the caps transformation, the operation
was split in two phases:

1. Rangify the supported caps structures.
2. Add the missing (and supported) caps features.

Step 1 modified its logic, by copying any unrecognized structure.
It's a previous step required for allowing ANY caps feature as
passthrough.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1024>
2021-10-18 19:14:15 +00:00
Seungha Yang
be9cf6c9cd d3d11: d3d11{convert,scale}: Add add-borders property
Functionally identical to that of videoscale element.

When disabled, d3d11convert or d3d11scale element will scale
image without adding borders, meaning that display aspect ratio
will not be preserved.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1170>
2021-10-17 12:36:28 +00:00
Víctor Manuel Jáquez Leal
ff0fae50af vapostproc: Add add-borders property to keep dar
Just as videoscale, it enables add-borders property (FALSE by default)
in vapostproc to add border, if necessary, to keep the display aspect
ratio from the original image.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1169>
2021-10-17 11:24:26 +00:00
Víctor Manuel Jáquez Leal
52c09778b7 vapostproc: Fix early fixation.
First copy missing fields and then fixate all remaining fields.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1169>
2021-10-17 11:24:26 +00:00
Seungha Yang
47a53f5063 meson: wasapi2,mediafoundation: Work around Windows SDK header issue
Some SDK headers are not standard compliant, so MSVC will
complain when such headers are in use with "/permissive-" compile
option. Use "/Zc:twoPhase-" to work around the issue as documented in
https://docs.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-160#windows-header-issues

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1174>
2021-10-17 08:01:47 +00:00
Seungha Yang
d0c86365d2 mediafoundation: Use GetProcAddress() for OS version dependent symbols
We are using some symbols which are not available on Windows 7,
specifically D3D11 interop related ones

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1167>
2021-10-16 18:07:06 +09:00
Víctor Manuel Jáquez Leal
ee7af02c3e vapostproc: Transfer colorimetry at fixate if possible.
Taken from videoconvert element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1110>
2021-10-16 05:17:19 +00:00
Seungha Yang
ba79339d56 mediafoundation: Fix various string constness handling
... with fixing typo (g_strup -> g_strdup)

Constness needs to be explicit in C++ world otherwise compiler
would complain about that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1164>
2021-10-15 23:38:48 +09:00
Mengkejiergeli Ba
4a6cc431d2 va: Fix null ptr dereference for vadeocder
Making a null check in gst_va_decode_picture_free () indicates pic->buffers or pic->slices
can be null, then in _destroy_buffers () the pointers are dereferenced, which is detected
as dereference after null check by Coverity. Thus, modify the code to do null check in
_detroy_buffers ().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1143>
2021-10-15 00:45:44 +00:00
Seungha Yang
b3710aa68d d3d11: Rename screen capture element
Old name "desktopdup" may confuse users. Now it's renamed to
"screencapture"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1136>
2021-10-14 15:15:56 +00:00
Mengkejiergeli Ba
5e7aa06257 va: Fix error handling for decoder
Need to check if va decoder is closed successfully.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1131>
2021-10-14 11:12:41 +00:00
Mengkejiergeli Ba
2eaba0cefa va: Fix error handling for base transform
Need to check the returned value of gst_buffer_pool_set_active() when
setting the active status of buffer pool.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1131>
2021-10-14 11:12:41 +00:00
Víctor Manuel Jáquez Leal
a2aa2cda42 vapostproc: Negotiate interlaced.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1109>
2021-10-13 14:59:09 +00:00
Víctor Manuel Jáquez Leal
60be3dbd2a vapostproc: Copy missing fields at fixate.
When caps negotiation implies a caps feature change, some fields might
get lost. This patch brings them back from input caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1109>
2021-10-13 14:59:09 +00:00
Víctor Manuel Jáquez Leal
5ae1072c2f vapostproc: Simplify size fixate.
gst_va_vpp_fixate_size() returned the fixated caps, but that is not
needed since `othercaps` are modified inline.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1109>
2021-10-13 14:59:09 +00:00
Víctor Manuel Jáquez Leal
b53446ddc9 vapostproc: Simplify fixate.
The first approach to fixate was simply a copy&paste of both
videoconvert and videoscale, trying to keep their logic as isolated
as possible. But that brought duplicated and sparse logic.

This patch merge both approaches simplifying the fixate operation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1109>
2021-10-13 14:59:09 +00:00
Víctor Manuel Jáquez Leal
1642c3fc96 va: filter, deinterlace, vpp: Add gst_va_buffer_get_surface_flags().
Add a helper function to get, from GstVideoInfo and GstBuffers flags,
the VA interlace surface flags. This is used currently by vainterlace
element, but it will be used in vapostproc too if it can process
interlaced frames.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1109>
2021-10-13 14:59:09 +00:00
Mengkejiergeli Ba
40d559adcf msdkenc: fix vp9enc initialization fail
MediaSDK does not support to handle extbuff with id
MFX_EXTBUFF_VIDEO_SIGNAL_INFO for mjpegenc and vp9enc. Hence, need to
exclude mjpeg and vp9 when passing color properties to MediaSDK during
msdkenc initialization.

Fix issue: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/764

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1101>
2021-10-12 03:45:41 +00:00
Seungha Yang
4b85704b88 d3d11: Add device provider for d3d11desktopdupsrc
... and add support for multi-GPU/multi-monitor

By using newly added "monitor-handle" property, user can specify a
monitor to be captured via HMONITOR handle.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1673
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1103>
2021-10-11 15:21:26 +00:00
Víctor Manuel Jáquez Leal
35575e7b11 va: allocator: dmabuf: Use GstVaSurfaceCopy, if possible.
If dmabuf-based buffer to copy contains only one memory, and there are
memories available in the allocator's pool, it's possible a fast
memory copy using GstVaSurfaceCopy, regardless the drm modifier.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Víctor Manuel Jáquez Leal
cf751d54a9 va: allocator: Use GstVaSurfaceCopy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Víctor Manuel Jáquez Leal
ffa2522fc0 va: Add GstVaSurfaceCopy class.
This new class is a helper for fast/tricky copy of surfaces. First it
tries to copy using the function vaCopy in libva 1.12. If it fails, or
it's not available, a GstVaFilter is tried to be instantiated with the
allocator's parameters, and if succeed, it's used for copying the
source surface.

This is required for dmabuf surfaces with drm modifier.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Víctor Manuel Jáquez Leal
f1e2eb4f1e va: filter: Enable to pass VASurfaceID in GstVaSample.
Initially GstVaSample processed its GstBuffer member to get the
VASurfaceID. But it might cases where we already have the VASurfaceID
to process by the filter.

This patch enables the possibility to pass the surfaces rather than
the buffers. In order to validate the surfaces a function to check
surfaces were added.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Víctor Manuel Jáquez Leal
14156f8270 va: Split VA memory handling in different files.
Take out the VA memory wrappers from gstvallocator.c to an external
file exposing the functions.

This is going to be needed for the copy helper object.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Víctor Manuel Jáquez Leal
1be43e76cc va: allocator: Add missing header file.
Added stdint.h because uintptr_t is used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Víctor Manuel Jáquez Leal
2947bd6ef1 va: display: Add gst_va_display_has_vpp()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1023>
2021-10-10 17:03:29 +00:00
Benjamin Gaignard
7e9e17ebbe v4l2codecs: Align v4l2-controls header with kernel 5.15-rc3
Update v4l2-controls to be aligned with kernel 5.15-rc3.
Fix VP8 decoder to use the correct field name.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1081>
2021-10-10 15:50:57 +00:00
Seungha Yang
0d96e43c91 mediafoundation: mfvideoenc: Use DXGI adapter LUID
Make use of new DXGI adapter LUID based device context sharing.
Note that we were using DXGI adapter LUID to open MFT already.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1098>
2021-10-10 03:23:58 +09:00
Seungha Yang
5707e487cf d3d11: d3d11decoder: Use DXGI adapter LUID
... instead of index of DXGI adapter.

The order of IDXGIAdapter1 enumerated via IDXGIFactory1::EnumAdapters1
can be varying even there's no rebooting in case that GPU preference order
is updated by user (for example, it can be done by using NVIDIA Control Panel
in case of multi-GPU laptop system) and eGPU is another possible case.

So, for an element which requires fixed target GPU requirement,
index based device enumeration is unreliable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1098>
2021-10-10 03:23:58 +09:00
Seungha Yang
d8eff2623d d3d11: d3d11device: Remove "allow-tearing" property
Plugin can query DXGI_FEATURE_PRESENT_ALLOW_TEARING without d3d11device
help

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1098>
2021-10-10 01:01:44 +09:00
Seungha Yang
7286c8e302 d3d11: d3d11desktopdupsrc: Add support for non-D3D11 downstream element
By this commit, application doesn't need to configure d3d11download
element for software pipeline which will make things simpler

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1082>
2021-10-08 16:13:46 +09:00
Víctor Manuel Jáquez Leal
01cfc1ee7e va: Use macro rather than VAMemory feature string.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1061>
2021-10-06 07:19:50 +00:00
Seungha Yang
7c557c2d65 codecs: mpeg2decoder: Use GstFlowReturn everywhere
boolean return value is not sufficient for representing the reason
of error in most cases. For instance, any errors around new_sequence()
would mean negotiation error, not just *ERROR*.
And some subclasses will allocate buffer/memory/surface on new_picture()
but it could be failed because of expected error, likely flushing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1019>
2021-10-04 20:56:46 +00:00
Seungha Yang
e322745763 codecs: h264decoder: Use GstFlowReturn everywhere
boolean return value is not sufficient for representing the reason
of error in most cases. For instance, any errors around new_sequence()
would mean negotiation error, not just *ERROR*.
And some subclasses will allocate buffer/memory/surface on new_picture()
but it could be failed because of expected error, likely flushing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1019>
2021-10-04 20:56:46 +00:00
Seungha Yang
5b405d1585 codecs: h265decoder: Use GstFlowReturn everywhere
boolean return value is not sufficient for representing the reason
of error in most cases. For instance, any errors around new_sequence()
would mean negotiation error, not just *ERROR*.
And some subclasses will allocate buffer/memory/surface on new_picture()
but it could be failed because of expected error, likely flushing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1019>
2021-10-04 20:56:46 +00:00
Víctor Manuel Jáquez Leal
2e6cd5c2e4 va: Make libgudev dependency optional.
libgudev is a problematic dependency, particularly in sandboxed
environments, such as flatpak.

This patch implements a way to get the available VA devices using
brute-forced traverse of /dev/drm/renderD* directory. Thus usable in
those sandboxed environments.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1027>
2021-10-04 10:19:36 +00:00
Víctor Manuel Jáquez Leal
e699aaeb16 va: meson: Move back libgudev dependency to plugin.
When move the libgstva, libgudev dependency was moved as part of the
library, though it's not use by the library but the plugin. This patch
moves back libgudev dependency to the plugin.

Also HAVE_LIBDRM is move to the library which is the one who use it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1027>
2021-10-04 10:19:36 +00:00
Seungha Yang
da7f4e0a69 nvcodec: nvh264sldec: Add support for interlaced stream
Implement missing interlaced stream support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1026>
2021-10-04 08:04:00 +00:00
Seungha Yang
ce8965b75b nvcodec: nvh264sldec: Consider additional render delay DPB pictures
At least additional 4 pictures are required

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1026>
2021-10-04 08:04:00 +00:00
Seungha Yang
613d380b97 nvcodec: nvvp9sldec: Fix for VP9 profile2 decoding
Fix for output video format to be selected correctly

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1026>
2021-10-04 08:04:00 +00:00
Seungha Yang
baf252b48b msdk: meson: Fix build on Windows
subprojects\gst-plugins-bad\sys\msdk\meson.build:160:2: ERROR: Unknown variable "libva_dep".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1022>
2021-10-04 07:14:33 +00:00
Seungha Yang
6a756b9f46 d3d11: d3d11vp9dec: Fix use_prev_in_find_mv_refs value setting
"last_show_frame" should be updated based on
GstVp9FrameHeader::show_frame, not show_existing_frame

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1021>
2021-10-03 02:25:50 +09:00
Seungha Yang
834d6f4031 nvcodec: nv{vp8,vp9}sldec: Implement get_preferred_output_delay()
Equivalent to that of nvh264sldec. Use render delay in case of non-live
pipeline for the better throughput performance.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/987>
2021-10-02 12:11:48 +00:00
Víctor Manuel Jáquez Leal
5e08ede8f6 va: meson: Update and enhance meson syntax usage.
This patch contains two updates:

1. Instead of checking for dependency already checked just to verify a
   version, we use the dependency version API.
2. Update the deprecated function get_pkgconfig_variable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/997>
2021-10-02 00:54:56 +00:00
Víctor Manuel Jáquez Leal
a769e3308d msdk: meson: Don't get dependency variable before it's valid.
It's possible to have installed MediaSDK environment
package (libmfx-dev in Debian) without libva environment package. This
setup will lead to a breakage of meson configuration.

The fix is to get the libva's driver directory variable after the
dependency is validated as found.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/998>
2021-10-01 23:43:41 +00:00
Seungha Yang
feb5a5aae6 mfdeviceprovider: Add support for device update
Similar to the wasapi2 plugin, GstWinRT library will be used for UWP,
and adding new GstWin32DeviceWatcher object implementation for
Win32 desktop application.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/947>
2021-09-30 06:13:07 +00:00
Seungha Yang
2f791ff027 wasapi2deviceprovider: Add support for device update
... by using newly implemented GstWinRT library

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/947>
2021-09-30 06:13:07 +00:00
Seungha Yang
052983014e d3d11videosink: Add support for crop meta
... when upstream element is d3d11.

Note that, if upstream element is not d3d11, crop meta is almost
pointless since d3d11videosink will upload video frame to GPU memory
in any case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/933>
2021-09-27 16:29:09 +00:00
Seungha Yang
0fa5a06ed9 d3d11videosink: Perform propose_allocation() even when we have no configured window
In order to support d3d11 device update, d3d11videosink will configure
window on the first buffer. So, there might not be configured
window when propose_allocation() is required.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/933>
2021-09-27 16:29:09 +00:00
Thibault Saunier
019971a3c7 Move files from gst-plugins-bad into the "subprojects/gst-plugins-bad/" subdir 2021-09-24 16:14:36 -03:00