The uvcsink was limited to only transfer YUY2 and MJPEG. For the
uncompressed formats there is no technical reason not to support them.
Since gst_video_format_to_string is already supporting more fourcc than
only YUY2 we use the default path in gst_v4l2uvc_fourcc_to_bare_struct
to create structures for more formats and bail out if the returned
format is not from the uncompressed type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6037>
A zero-sized box is not really a problem and can be skipped to look at any
possibly following ones.
BMD ATEM devices specifically write a zero-sized bmdc box in the sample
description, followed by the avcC box in case of h264. Previously the avcC box
would simply not be read at all and the file would be unplayable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7564>
This notably follow the way we order the template and keeps the
format:Interlaced caps at the end. This change also fixes
an early skip check, that would skip if a driver only supports
alternate interlacing for a specific format. It also fixes
a bug where only the last resolution of a discrete frame size
was allowed to use format:Interlaced. Finally, similar to template
caps code, simplify the caps for earch featurs, making the debug output
manageable and (marginally) improve negotiation speed.
This change will make it easier to introduce memory:DMABuf.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7540>
In qml6glsrc, we capture the application by copying the back buffer into
our own FBO. The afterRendering() signal is too soon as from the apitrace, the
application has been rendered into a QT internal buffer, to be used as a cache
for refresh.
Use afterFrameEnd() signal instead. This works with no delay on GLES. With GL
it seems to reduce from 2 to 1 frame delay (this may be platform specific). A
different recording technique would need to be used to completely remove this
delay.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7351>
In fact, the va decoder is just a internal helper class and its access
is under the control of all dec elements. So far, there is no parallel
operation on it now.
At the other side, some code scan tools report race condition issues.
For example, the "context" field is just protected with lock at _open()
but is not protected at _add_param_buffer().
So we just delete all its lock usage.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7547>
Need HAVE_CONFIG_H to avoid build failure on Solaris 11.4 with gcc 14.1:
../subprojects/gstreamer/tests/misc/../../libs/gst/net/gstnetutils.c:71:7:
error: implicit declaration of function ‘setsockopt’
[-Wimplicit-function-declaration]
71 | if (setsockopt (fd, IPPROTO_IP, IP_TOS, &tos, sizeof (tos)) < 0) {
| ^~~~~~~~~~
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7553>
Timestamps are untouched by default, but the new mode can now be enabled to replace RTP timestamps
with ones generated from the buffer PTS. Making it an enum in case different modes are needed in the future.
That allows for a rtpjitterbuffer to do proper drift compensation, so that the stream coming out of gst-rtsp-server
is not drifting compared to the pipeline clock and also not compared to the RTCP NTP times.
Most of the code is borrowed from rtpbasepayload, as it's exactly its behaviour which I wanted to bring here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7526>
Valgrind complains about uninitialized memory used in an ioctl
Syscall param ioctl(VKI_V4L2_G_TUNER).reserved points to uninitialised byte(s)
at 0x719294F: ioctl (ioctl.c:36)
by 0x3126A817: gst_v4l2_fill_lists (v4l2_calls.c:185)
by 0x3126A817: gst_v4l2_open (v4l2_calls.c:589)
by 0x3123F1C2: gst_v4l2_device_provider_probe_device (gstv4l2deviceprovider.c:122)
by 0x3123F648: gst_v4l2_device_provider_device_from_udev (gstv4l2deviceprovider.c:301)
by 0x3123F998: provider_thread (gstv4l2deviceprovider.c:395)
by 0x796FA50: ??? (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.7200.4)
by 0x710CAC2: start_thread (pthread_create.c:442)
by 0x719DA03: clone (clone.S:100)
Address 0x44008a34 is on thread 11's stack
in frame #1, created by gst_v4l2_open (v4l2_calls.c:524)
Uninitialised value was created by a stack allocation
at 0x3126A024: gst_v4l2_open (v4l2_calls.c:524)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6144>
Be smarter when allocating sink and source memory pools to reduce the
memory footprint. Use gst_v4l2_decoder_get_render_delay() to know the
need number of buffers for downstream element.
Handle errors in case of memory allocation failures.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7544>
This is not trully supported in V4L2, but we can emulate this similar to
what other elements do. In this patch we ensure that 0/1 is supported by
encoders (caps query),and uses a default of 30fps whenever we need to
set a framerate into the driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7352>
It has to be included in the block duration but in GStreamer we're not
including it in the buffer duration, so it has to be added again here.
Not including it in the block duration can lead to fatal errors when playing
back with Firefox if there are more padding samples than actual samples, e.g.
> D/MediaDemuxer WebMDemuxer[7f6a0808b900] ::GetNextPacket: Padding frames larger
> than packet size, flagging the packet for error (padding: {13500000,1000000000},
> duration: {6000,1000000}, already processed: false)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7502>
By setting the earliest time to timestamp + 2 * diff there would be a difference
of 1 * diff between the current clock time and the earliest time the element
would let through in the future. If e.g. a frame is arriving 30s late at the
sink, then not just all frames up to that point would be dropped but also 30s of
frames after the current clock time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7459>
This makes sure that if upstream has different latencies that we're still
outputting buffers with increasining timestamps across the different streams
unless buffers are arriving after the latency deadline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7500>
splitmuxsink can't possibly know how much latency it will introduce as it always
keeps one GOP around before outputting something. This breaks the latency
configuration of the pipeline and we're better off just pretending that
everything downstream of the sinkpads is not live.
Especially muxers that are based on aggregator and time out on the latency
deadline can easily misbehave otherwise as the deadline will be exceeded usually.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7499>
Adding prefer-stream-ordered-alloc property to GstCudaContext.
If stream ordered allocation buffer pool option is not configured
and this property is enabled, buffer pool will enable the stream
ordered allocation. Otherwise it will follow default behavior.
If GST_CUDA_ENABLE_STREAM_ORDERED_ALLOC env is set,
default behavior is enabling the stream ordered allocation.
Otherwise sync alloc/free method will be used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7427>
Default CUDA memory allocation will cause implicit global
synchronization. This stream ordered allocation can avoid it
since memory allocation and free operations are asynchronous
and executed in the associated cuda stream context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7427>
While transforming the internals of waylandsink into a library, the
context type name was accidentally changed, causing an ABI break. Change
it back to its original (as used by the libgstgl), and add support for
the misnamed version as a backward compatibility measure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7482>
The version was incorrectly encoded in the opj_config.h header with
the earlier version, which caused a compilation warning.
```
../subprojects/gst-plugins-bad/ext/openjpeg/gstopenjpegenc.c:943:5: warning: ‘bpp’ is deprecated:
Use prec instead [-Wdeprecated-declarations]
943 | comps[i].bpp = GST_VIDEO_FRAME_COMP_DEPTH (frame, i);
| ^~~~~
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7481>
When no ports are given, gst_jack_get_ports() is called to get all the
(physical) output ports but then the result is ignored, triggering the
"No physical output ports found..." error.
Instead, move the queried ports to the variable we're going to use
later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7474>
If the UVC gadget announces multiple formats in the descriptors the uvcsink
doesn't select the actual format but let's the UVC hosts select the format.
If the GStreamer pipeline is started before a UVC host selected the format,
upstream decides on a format until the UVC host has decided. In this case, the
current format needs to be set based on the caps from the caps event to be able
to detect if the format selection by the UVC host requires a format change on
the GStreamer pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7473>
The uvcsink may be put into the READY state to start listening for UVC requests.
Therefore, the UVC host may set a streaming format before the GStreamer pipeline
is started and the uvcsink received a caps event. In this case, prev_caps will
be NULL.
If the EVENT_CAPS has not been received, skip the check if the format needs to
be changed, since the sink will be started with the format selected by the UVC
host, anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7473>
Until now we were overriding pad functions forgetting about the function
data (that are set using the _full variant of the functions setters), meaning
that the data was lost and any user of that feature would get empty data when
the wrapped function were called.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7466>
Adding a property to control the number of in-flight GPU commands
(default is unlimited). Note that actual maximum number is defined
in d3d12device's direct command queue object which is 32 now,
thus total number of scheduled GPU commands cannot exceed 32.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7444>
If two (or more) rtpfunnel elements are cascaded, then only one will
realistically have information on the particular ssrc that is in use for a
particular input stream. As such, any key unit requests may never reach the
corresponding encoder.
This has been discovered by combining simulcast and BUNDLE with webrtcbin.
simulcast uses one rtpfunnel, and BUNDLE uses another rtpfunnel.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7405>
Sometimes under certain loads, VT can error out with kVTVideoEncoderMalfunctionErr or kVTVideoEncoderNotAvailableNowErr.
These have been reported to happen more often than usual if CopyProperty/SetProperty() is used close to the encode call.
Both can be worked around by restarting the encoding session.
These errors can be returned either directly from VTCompressionSessionEncodeFrame() or later in the encoding callback.
This patch handles both scenarios the same way - a session restart is be attempted on the next encode_frame() call.
If the error is returned immediately by the encode call, it's possible that some correct frames will still be given to
the output callback, but for simplicity (+ because I wasn't able to verify this scenario) let's just discard those.
In addition, this commit also simplifies the beach/drop logic in enqueue_buffer.
Related bug reports in other projects:
http://www.openradar.me/45889262https://github.com/aws/amazon-chime-sdk-ios/issues/170#issuecomment-741908622
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7173>
If state is changing from playing to paused, and rate is reset to 1
which causes seek position is valid, current code will do seek for
streams that are not seekable. So need to check whether stream is
seekable before seeking.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7441>
All accesses to it were protected either by a mutex already, or at least
used yet another mutex for gst_poll_read_control() / gst_poll_write_control().
The usage of GstPoll has to stay for backwards compatibility as it is
used to manage the (public) fd that can be used to wait for the bus to
be ready, but this switch at least simplifies the implementation a bit
and results in fewer atomic operations.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6684>
It was iterating over each field and after fixating its value was again
iterating over every field to find where to store the value.
Instead directly overwrite the value after validating it.
Also actually check that the structure is writable before modifying its fields
by using gst_structure_map_in_place() instead of gst_structure_fixate().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7420>
If the pending remote description has an invalid BUNDLE group _parse_bundle()
triggers early return from _create_answer_task(), before ret has been
initialized, so it needs to be checked before attempting to call
gst_sdp_message_copy().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7423>
The initial calculation for the precision shift was wrong and would allow for
overflows during the calculations which were not detected and lead to wrong
results.
Also add a test for a case where overflows where previously not detected and
caused a completely wrong result.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7406>
webrtcsrc first creates recvonly transceivers with codec-preferences
and expects that after applying a remote description, the
previously created transceivers are used rather than having new
transceivers created.
When pairing webrtcsink + webrtcsrc, the offer sdp from webrtcsink has a media
section with sendonly direction. In !7156, which was implemented following
RFC9429 Section 5.10, we only reuse a unassociated transceiver when applying a
remote description if the media is sendrecv or recvonly, and that caused creation
of new transceivers when applying a remote offer in webrtcsrc, thus losing
information from codec preferences like the RTP extension headers in the
previously created transceivers.
Since the change in !7156 broke existing code from webrtcsrc, relax the condition
for reusing unassociated transceivers and add a test to document this behavior which
wasn't covered by any tests before.
Fixes#3753.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7417>
```
In file included from ../subprojects/gst-plugins-good/ext/qt6/gstqsg6material.cc:31:
../subprojects/gst-plugins-good/ext/qt6/gstqsg6material.h:69:17: error: private
field 'mem_' is not used [-Werror,-Wunused-private-field]
69 | GstMemory * mem_;
| ^
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7414>
Before trying to retrieve a GMainContext from a provided
GstPlayerSignalDispatcher, check that it is actually
GstPlayerGMainContextSignalDispatcher. If not, use the
default GMainContext for dispatching signals via the adapter
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7392>
There were two main issues:
The mix matrix was not protected with the object lock
The code was mistakenly assuming that after updating the mix matrix
a reconfigure event sent upstream would be enough to cause upstream to
send caps again, and the converter was only reconstructed in ->set_caps.
That was not actually enough, as if the new matrix didn't affect the
number of input / output channels there was no reason for upstream to do
anything after getting the unchanged caps.
The fix for this was to have ->transform also recreate the converter
when needed, with the added subtlety that depending on the mix matrix
the element could be set to passthrough. This means that when setting
the mix matrix the converter also had to be recreated immediately to
check if the element had to be switched back to non-passthrough.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7363>
Don't reuse the same stats state structure across multiple
get-stats calls. Make each callback take a copy of the
non-changing fields it needs and use a local working copy
to avoid crashing.
Fixes problems with the unit test crashing sometimes for the
unit test introduced in MR !7338
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7387>
Since bins can set the context of their children elements, the set_context()
vmethod shouldn't call bus messages post methods, since it locks the parent
object, the bin, which might be already locked, leading to a deadlock.
Fixes: #3706
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7378>
When multiple streams are bundled on the same transport,
the statistics would end up incorrectly generated,
as each pad would regenerate stats for every ssrc on the
transport, overwriting previous iterations and assigning
bogus media kind and other values to the wrong ssrc.
Fix by making sure each pad only loops and generates
statistics for the one ssrc that pad is receiving / sending.
Add a unit test that the codec kind field in RTP statistics
are now generated correctly.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2555
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7338>
Adding a new videosink element for Windows composition API based
applications. Unlike d3d12videosink, this element will create only
DXGI swapchain by using IDXGIFactory2::CreateSwapChainForComposition()
without actual window handle, so that video scene can be composed
via Windows native composition API, such as DirectComposition.
Note that this videosink does not support GstVideoOverlay interface
because of the design.
The swapchain created by this element can be used with
* DirectComposition's IDCompositionVisual in Win32 app
* WinRT and WinUI3's UI.Composition in Win32/UWP app
* UWP and WinUI3 XAML's SwapChainPanel
See also examples in this commit which show usage of the videosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7287>
Prevent the default webrtc test machinery from attempting to
create and set an answer when we're just testing rollback
of the offers. Add some locking / waiting to ensure the test
is complete before exiting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7365>
Use pattern matching against expected error strings that
might include internal element names, where the names
are default assigned with incrementing integers. When running
with CK_FORK=no, there may have been previous tests that
ran in the same process and incremented the counters more
than when running in the default fork-per-test mode.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7365>
This patch addresses the issue where GStreamer would throw an error when
attempting to use bt2100-hlg colorimetry with V4L2, which is not
supported by the current V4L2 kernel. When bt2100-hlg colorimetry is set
from caps, the check for transfer (GST_VIDEO_TRANSFER_ARIB_STD_B67) is
bypassed.
The main improvement is to avoid checking the transfer value in
gst_v4l2_video_colorimetry_matches when it is
GST_VIDEO_TRANSFER_ARIB_STD_B67. This is because the transfer value in
the cinfo parameter comes from gst_v4l2_object_get_colorspace, which
converts the transfer to another value, causing a mismatch.
Since the kernel does not support GST_VIDEO_TRANSFER_ARIB_STD_B67,
gst_v4l2_object_get_colorspace cannot map it correctly from V4L2 to
GStreamer. Therefore, we ignore this check to prevent errors.
changes:
- Added a condition in gst_v4l2_video_colorimetry_matches to bypass the
transfer check when the transfer is GST_VIDEO_TRANSFER_ARIB_STD_B67.
- Ensured that the pipeline does not throw errors due to unsupported
bt2100-hlg colorimetry in V4L2.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7212>
num_backward_references > 0 means we need to cache several frames
after the current frame. But the basetransform class does not
provide any _drain() kind function, so we do not have the chance
to push out our cached frames when EOS or set caps event comes.
Rather than losing the last several frames, we should just give up
the backward reference here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7348>
The current code forgets to push the first several frames if the forward
reference > 0. They are just cached in history array and will never be
deinterlaced and pushed.
For the first several frames, even the forward reference frames are not
enough, we still need to deinterlace them as normal and push them after that.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7348>
"adobe" in app14 marker seem not a null-terminted string. so, when
we use gst_byte_reader_get_string_utf8, more bytes will be read until
null. and "gst_byte_reader_get_uint8 (&reader, &transform)" will almost fail
to read transform
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7356>
I didn't find the behavior and purpose of streamsynchronizer documented
or intuitive. Eventually I got Edward to explain it to me, which was
very helpful. Now I'm contributing some docs so that the next person
doesn't have to figure it out by asking around and hoping for an answer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7084>
fix playback fail, when some file with length_size_minus_one == 2
According to the spec 2 cannot be a valid value, so that stream has a
bad config record. but breaking the decoding because of that, perhaps is too much.
and ffmpeg seem not check this
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7213>
librtmp allows for attaching arbitrary AMF objects to the end of the
connect packet, and this is commonly used for authenticating with
servers.
Add a new property, extra-connect-args, that mimics librtmp's behavior.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7054>
When glupload generates sink caps based on src caps after determining upload method, src
caps may only contain RGBA format.
In this case, the raw caps on the sink pad generated by glupload will only contain the
RGBA format, which will cause caps negotiation fail, because the filter caps used for
negotiation by the upstream element may only contain other formats, such as xBGR, etc.
Add the formats supported by #GstGLMemory to raw caps to ensure that caps negotiation
succeeds.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7061>
With GLES 2.0 we are forced to use CopyTextImage2D which requires
passing an internal format. With QT6 eglfs, we need to pass GL_RGB
instead, probably because of how the texture has been created. As its
hard to guess, simply fallback to GL_RGB on failure. This fixes usage
or qml6glsrc with eglfs backend, without loosing support for
semi-transparent window on other platforms.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7321>
While analyzing gst_vulkan_get_or_create_image_view_with_info() it
seems obvious that this function returns NULL, and that this should be
covered in the return annotations. However, closer inspection indicates
that this is only a precondition check when the incoming arguments are
incompatible with each other, and should not be considered as a function
that optionally returns a pointer.
Signify this by using precondition checks instead of an opencoded
if-return-NULL.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5736>
When checking for renegotiation against a local offer,
reverse the remote direction in the corresponding answer
to fix falsely not triggering on-negotiation needed when
switching (for example) from local sendrecv -> recvonly
against a peer that answered 'recvonly'.
In the other direction, when the local was the answerer,
renegotiation might trigger when it didn't need to -
whenever the local transceiver direction differs from
the intersected direction we chose. Instead what we want
is to check if the intersected direction we would now
choose differs from what was previously chosen.
This makes the behaviour in both cases match the
behaviour described in
https://www.w3.org/TR/webrtc/#dfn-check-if-negotiation-is-needed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7303>
In order to use oes-external, the qml6glsink needs a fragment shader that uses
the samplerExternalOES.
The qsb tool is not able to handle shaders that contain samplerExternalOES since
this feature is not supported by all target shading languages. The qsb tool is
able to replace a shader in the qsb file to handle this use case. Use it to
generate a shader variant that uses samplerExternalOES for OpenGL ES and select
that variant if the qml6glsink negotiated texture target oes-external.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7319>
Fixes for basic rollback (from have-local-offer or have-remote-offer to
stable). Allow having no SDP attached to the webrtc session description
in that case, and avoid all the transceiver and ICE update logic
normally applied when entering the stable signalling state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7304>
release_frame() can be useful for manually dropping frames without posting QoS messages like finish_frame() would.
Matches the same kind of API on the decoder side of things.
Modifies the behaviour of release_frame() to make sure events from released frames are stored as 'pending'
and pushed before the next non-dropped frame. This is needed because now release_frame() can be called outside of
finish_frame(), so we would potentially just lose events and bad things would happen.
drop_frame() was also added to match the decoder API. It functions almost identically to finish_frame() without a buffer
attached to the frame, except instead of immediately pushing the frame's events, it will store them as pending.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7190>
In case when conn->input_stream is NULL and glib was built with
"glib_checks" enabled, g_pollable_input_stream_read_nonblocking()
returns -1, but does not set the "err".
The call stack:
read_bytes() ->
fill_bytes() ->
fill_raw_bytes()
The return value -1 passed up to read_bytes() and incorrectly
processed there after "error:" label.
This changes the return value to EINVAL.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7210>
Fix an inverted condition when checking if sink pad caps match
the codec-preference of an unassociated transceiver, and
fix a condition check for transceiver media kind to
avoid matching sinkpad requests where caps aren't provided
against unassociated transceivers where the caps might
not match later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7237>
According to the ffmpeg documentation[1] the read_packet function should never
return 0. ffmpegdata_peek returns 0 when the stream is EOF causing us to fail
detecting EOF and never close the pipeline, continually spinning on more data.
ffmpeg instead wants an AVERROR_EOF code for to signal EOF.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4999>
With MR 7156, transceivers and transports are created earlier,
but for sendrecv media we could get `not-linked` errors due to
transportreceivebin not being connected to rtpbin yet when incoming
data arrives.
This condition wasn't being tested in elements_webrtcbin, but could be
reproduced in the webrtcbidirectional example. This commit now also
adds a test for this, so that this doesn't regress anymore.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7294>
A previous fix, a275e1e029, is correct but was too
permissive since it treats all un-matched NAL units the same as AU delimiters
even though some other NAL unit types can be encountered in the processing loop.
The problem this can cause is that some hardware decoders experience bad
performance when handling FD units that precede the SPS.
This change restores the original behavior for FDs so that they're ignored until
the SPS is received and it preserves the codec conformance test gains that the
fix has achieved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7166>
glCheckFrameStatus() can fail by returning 0, and otherwise return a
status. Fix the trace to make it clear when we get an unkown status
compare to having an error, in which case we also trace the error code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7291>
Parts may emit bus messages that want to take the splitmuxsrc
lock and prevent the downward state change. Avoid a deadlock
after a part sends an error message by taking a ref and
dropping the lock around the unprepare call
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
Publish fragment-id in the messages that splitmuxsink and splitmuxsrc
send, so when they are received out of order (due to async finalization,
for example), they can still be identified / ordered correctly.
Fix a race in the splitmuxsink unit test where messages might be
received out of order
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
Add a `num-lookahead` property that will 'prepare' a number of
fragments in advance of the playhead if they have been deactivated
or closed by a limited number of `num-open-fragments`. It can help
to avoid any play stalls reading the indexes or headers of the next
file from high-latency media or on resource limited machines.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
Publish the playback offset for and duration into the
splitmuxsink-fragment-closed bus message as each fragment
finishes.
These can be passed to splitmuxsrc via the 'add-fragment'
signal to avoid splitmuxsrc measuring all files on startup
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
Add a reasonably large default for the number of simulataneous
files to open, that won't affect users that split recordings into
a few large files, but will help prevent fd exhaustion for users
that make recordings with lots of small fragments
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
When calculating the timestamp offset to apply to
media streams in a fragment, ensure that all fragments
are offset "together" to preserve alignment in cases
where there might gaps in a recording at a fragment boundary.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
Add a signal that allows adding fragments with a specific offset
and duration directly to splitmuxsrc's list. By providing the
fragment's offset on the playback timeline and duration directly,
splitmuxsrc doesn't need to measure the fragment making for faster
startup times.
Add a bus message that's published when fragments are measured,
reporting the offset and duration, so they can be cached by an
application and used on future invocations.
Add examples for handling the bus message and using the 'add-fragment'
signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
Add a property to limit the number of parts splitmux will open
simultaneously. Modify the part handling to support deactivating
and reactivating the demuxing for each part.
The default is '0', to preserve the existing behaviour of opening
all parts at the beginning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7053>
According to https://w3c.github.io/webrtc-pc/#set-the-session-description
(steps in 4.6.10.), we should be creating and associating transceivers when
setting session descriptions.
Before this commit, webrtcbin deviated from the spec:
1. Transceivers from sink pads where created when the sink pad was
requested, but not associated after setting local description, only
when signaling is STABLE.
2. Transceivers from remote offers were not created after applying the
the remote description, only when the answer is created, and were then
only associated once signaling is STABLE.
This commit makes webrtcbin follow the spec more closely with regards to
timing of transceivers creation and association.
A unit test is added, checking that the transceivers are created and
associated after every session description is set.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7156>
If a downstream buffer pool is offered, vulkanupload checks its allocation
parameters to honor them. Only adds to usage the TRANSFER bits, which are
required to upload buffers.
Also, fail if the buffer pool cannot be configured with the current parameters.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7219>
If the stream has a special colorimetry that is not in the colorimetry
list, it will cause negotiation to fail. We should allow passing any
colorimetry, so add an extra structure without the colorimetry field.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7029>
video-info supports encoded format to have RGB color-matrix, while
v4l2object just leave the v4l2 matrix to default when mapping
GST_VIDEO_COLOR_MATRIX_RGB. It causes gst matrix changed to be
GST_VIDEO_COLOR_MATRIX_BT601 when mapping v4l2 colorimetry.
So add support for encoded format with RGB color-matrix in v4l2object.
Note that for M2M encoders, we should in theory assume that that we can
transfer this value from OUTPUT to CAPTURE queues, though its only true
if the drivers does not do CSC. For now, we don't support any RGB
codecs, but leaving a note for the future.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3952>
The V4L2_MAP_QUANTIZATION macro has been fixed to something a lot saner,
fix our replica accordingly. The new macro now simply set the quantization
to full range is the pixel formats is RGB based, or if the JPEG
colorspace is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3952>
Now that driver version is expected to be equal or superior to 1.3.275 the bug
in NVIDIA and RADV regarding usage is solved, we can revert commit b7ded81f7b.
Also this patch sets the internal usage variable after all the validation are
run, thus the state don't keep an invalid usage.
Finally, the now unused supported_usage variable is dropped.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7247>
Virtual method set_config() can be called several times, and if the number of
profiles counter isn't reset the pool will reach an error state.
The purpose of number of profiles is to check the number of valid vulkan video
profiles (two in the case of transcoding use-case, for example) so it's local to
set_config() virtual method.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7247>
Fixing warnings
GStreamer-CRITICAL **: 01:21:25.862: gst_value_set_int_range_step:
assertion 'start < end' failed
Although when QSV runtime reports a codec is supported, resolution query
fails sometimes, espeically VP9 encoder case on Windows.
Don't try to register an element if resolution query returned an error
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7250>
A fence configured in GstD3D12Memory should be used only for
write access to be completed. And because d3d12 -> d3d11 copy path
is read access to d3d12 resource, we should not set fence to
memory. Otherwise another read access to the d3d12 resource
will wait for d3d11 device context's copy operation although
simultaneous read access is allowed.
Use background thread to keep d3d12 resource and wait for d3d11 device's
copy operation instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7243>
When configured in constant bitrate mode, the muxer computes timing information
using the configured bitrate and the byte counter (now = bytes sent / byterate).
When an application changes the bitrate in CBR mode during playback, the
relationship between bytes sent and bitrate is no longer valid so new timing
values will be off by the ratio of the old bitrate to the new bitrate.
Furthermore, it will upset the way that padding is generated.
pad_stream() works by trying to fit the byte counter to now * byterate.
The result is that when decreasing bitrate, the muxer stalls, waiting until the
byte counter is in agreement with now * byterate. Also, when increasing
bitrate, the padding will spike in volume until the byte counter fits with
now * byterate.
If the byte counter is scaled by the ratio of new bitrate / old bitrate when
adjusting bitrate, then padding is generated in a way that applications would
more likely expect.
One detail this change doesn't yet address is whether the next PCR will match up
optimally with the previous PCR right after the byte counter is scaled. In that
case, some correction may be necessary. Also, perhaps the user should be
prevented from changing from bitrate=0 to bitrate=nonzero during playback since
it's not straightforward how to scale the byte counter in that case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7158>
We would previously register a whole bunch of encoder/decoder for which the caps
were ... "unknown/unknown".
Add a function to quickly check (without generating caps) whether a given
AVCodecID has a known mapping (which can include the {video|audio}/x-gst-av-*
ones) without generating the caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6237>
videoscale does not have convert function, so remove the convert
description in it's classification. Otherwise, if we want use
autovideoconvert to convert colorsapce, autovideoconvert will select
videoscale to do convert and this will cause to fail.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7215>
VLC counts METADATA as 1 even if the specification states you must not.
This leads to asfdemux failing since there are no bytes left when asfdemux
tries to extract the "last" header.
Do not fail hard in this case and try to proceed when everything else went
fine.
So at least gst-discoverer will see what's in the file.
Closes#3684
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7209>
This is to avoid a regression in validation layer (introduced by commit
916c4e70cd) when using vulkandownload
VUID-VkImageMemoryBarrier2-srcAccessMask-03914 .. vkCmdPipelineBarrier2():
pDependencyInfo->pImageMemoryBarriers[1].srcAccessMask (VK_ACCESS_TRANSFER_READ_BIT)
is not supported by stage mask (VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR)
since vulkandownload set DPB memories' access mask to
VK_ACCESS_TRANSFER_READ_BIT, while they are retain by the DPB queue, so when
they are used as DPB after been shown, this validation error is raised.
Must of the barrier values are set ignoring the previous state of the vulkan
images.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7211>
None of the symbols in webrtc-audio-coding-1 are marked with
`__declspec(dllexport)`, rendering the library usable only if
it was built with GCC/Clang.
The only fix available (as the pulseaudio copy has not been updated
with Google's upstream) is to ensure the fallback builds statically.
Although this change will also affect webrtcdsp's dependency on
webrtc-audio-processing-1, it does not break its compilation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6407>
The access flags are kept around the operations, but when the buffer is
released, the access flag should be reset to its original value, since queue
transfers can be done along the pipeline and, when reusing the buffer, the new
queue might not support the latest access flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7165>
Instead of dragging the last destination pipeline stage as current barrier
source pipeline stage (which isn't a valid semantic) this patch adds a parameter
to gst_vulkan_operation_add_frame_barrier() to set the source pipeline stage to
define the barrier.
The previous logic brought problems particularly with queue transfers, when the
new queue doesn't support the stage set during a previous operation in a
different queue.
Now the operation API is closer to Vulkan semantics.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7165>
Doing so resets the stride from the VideoMeta and it wasn't done before
the commit below. While on it, drop the plane size check as we can't
reliably predict the correct size when using DRM modifiers.
Fixes: 89b0a6fa23 ("va: refactor buffer import")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7187>
null event NT handle to ID3D12Fence::SetEventOnCompletion()
will block the calling CPU thread already, thus it has no point that
creating an event NT handle in order to immediate wait for fence at CPU-side.
Note that passing a valid event NT handle to the fence API might be useful
when we need to wait for the fence value later (or timeout is required),
or want to wait for multiple fences at once via WaitForMultipleObjects().
But it's not a considered use case for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7176>
GstD3D12Window.priv.input_info is referenced by mouse event handler
in order to calculate corresponding original position
if scene is rotated/flipped by the videosink.
Fixing regression introduced by recent d3d12videosink refactoring
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7177>
The driver - AKA intel-vaapi-driver - has been unmaintained for four years
now and encoding appears to be broken in various cases. As it's unlikely
that the situation will improve, blocklist the driver for encoding.
Decoding appears to be stable enough to keep it enabled.
The driver can still be used by setting the `GST_VA_ALL_DRIVERS` env
variable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7170>
GstFFMpegAudDec.context can be nullptr if decoder got closed
without opening new context. Note that we don't need to clear
AVCodecContext.extradata there since avcodec_free_context()
will do clear the data if needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7180>
The driver frame counters (processed, dropped, buffer level) are not
always correct apparently, and don't allow reliably assigning a frame
number to captured frames.
Instead of relying on them, count the number of frames directly here and
detect dropped frames based on the capture times of the frames: if more
than 1.75 frame durations are between two frames, then there must've
been a dropped frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7163>
Define a default usage and use it instead of repeating the same bitwise
addition.
Therefore, when usage is defined as zero, the usage is defined with the
format's supported usage and the default usage, now without the storage
bit, but with color and input attachment bits.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6798>
Not doing so would mean that tags would be overidden by any tag events sent by
upstream. Also only send a tag event directly if upstream never sent one.
By default use GST_TAG_MERGE_REPLACE to override tags that exist in both the
upstream event and this element with the ones from this element, but provide a
new "merge-mode" property to adjust the behaviour.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7145>
avcodec_close() is deprecated and it's not supported anymore to re-open
a codec, so we only ever allocate the codec in set_format() now and
always free it after usage.
As part of this, also fix various memory leaks in related code paths.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6505>
Direct access to AVInputFormat::read_probe() is not possible anymore
with ffmpeg 7.0, and the usefulness of this typefinder seems limited
anyway. An alternative implementation around av_probe_input_format3() or
similar would be possible but it would be going over all possible ffmpeg
probes at once.
Having a typefinder here means that basically every application will
load the gst-libav plugin when typefinding is necessary, which has
unnecessary performance impacts. If a typefinder from here was indeed
missing from typefindfunctions in gst-plugins-base then it would be
better to add it there directly.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3378
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6505>
If a d3d12 memory holds non-direct-queue fence but the fence was
created with D3D12_FENCE_FLAG_SHARED flag, use the fence instead of
waiting for fence at CPU side. Note that d3d12ipcsrc or
d3d12screencapture elements will hold such sharable fence.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7139>
This needs significant work to use the new Metal→Vulkan integration
extension `VK_EXT_metal_objects`
```
MoltenVK/mvk_deprecated_api.h:132:1: note: 'vkGetMTLDeviceMVK' has been explicitly marked deprecated here
MVK_DEPRECATED_USE_MTL_OBJS
^
MoltenVK/mvk_deprecated_api.h:74:52: note: expanded from macro 'MVK_DEPRECATED_USE_MTL_OBJS'
#define MVK_DEPRECATED_USE_MTL_OBJS VKAPI_ATTR [[deprecated("Use the VK_EXT_metal_objects extension instead.")]]
^
../sys/applemedia/videotexturecache-vulkan.mm:303:20: error: 'vkSetMTLTextureMVK' is deprecated:
Use the VK_EXT_metal_objects extension instead.
VkResult err = vkSetMTLTextureMVK (memory->vulkan_mem.image, texture);
^
MoltenVK/mvk_deprecated_api.h:151:1: note: 'vkSetMTLTextureMVK' has been explicitly marked deprecated here
MVK_DEPRECATED_USE_MTL_OBJS
^
MoltenVK/mvk_deprecated_api.h:74:52: note: expanded from macro 'MVK_DEPRECATED_USE_MTL_OBJS'
#define MVK_DEPRECATED_USE_MTL_OBJS VKAPI_ATTR [[deprecated("Use the VK_EXT_metal_objects extension instead.")]]
^
2 errors generated.
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7091>
With clang on macOS:
```
error: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long')
...
error: format specifies type 'unsigned long' but the argument has type 'VkImageView' (aka 'unsigned long long')
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7091>
When building for iOS in Cerbero, as of MoltenVK SDK 1.3.283, we have
to statically link to libMoltenVK since it no longer ships a dylib.
This requires linking to libc++, so we find the dep with the objc++
compiler to ensure that meson uses the right linker.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7091>
${libdir}/gstreamer-1.0/include is only valid after installation, but
extra_cflags are added unconditionally, so we can't use that for
include flags.
Instead, let's add the include flag via variables, which are different
for installed and uninstalled pc files.
This is particularly bad for consuming GStreamer via CMake which barfs
on non-existent include paths.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7130>
since the encoded output is changing based on version
it does not make sense to check the output bitstream with a fixed
bytearray since the version in the target might vary. So sticking
to checking the number of output buffers and encoded frame size
similar to the other tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7141>
The code is simplified by using GQuarks for looking for caps features, and
removing inner loops.
Also, it's used the pad template caps to compare with the incoming caps because
is cheaper at the beginning of negotiation, where the pad template caps is used.
And, since the ANY caps where removed, there's no need to check for an initial
intersection.
Finally, the completion of caps features is done through a loop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6698>
The video meta API now is a mandatory request for DMA kind negotiation. In
current code, the raw method always adds that video meta API in the query
of propose_allocation(), so we do not need to do the duplicated task here.
Just adding a comment to declare that.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6698>
The ANY caps in pad template caps seems to mess up the DMA negotiation.
The command of:
GST_GL_API=opengl gst-launch-1.0 -vf videotestsrc ! video/x-raw,format=NV12 !
vapostproc ! "video/x-raw(memory:DMABuf)" ! glimagesink
fails to negotiate, but in fact, the vapostproc can convert the input NV12
formant into the RGBA format to render.
The ANY may help the passthough mode, but we should make the negotiate correct
first.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6698>
gst_element_send_event(FLUSH_START / FLUSH_STOP) returns FALSE in cases
where any of the most downstream elements have unlinked pads, even if
the pipeline is successfully flushed.
Currently this is considered expected behavior in GStreamer. This patch
updates gst-validate to treat it as such and therefore not fail the test
for a "failing" flush.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7064>
After signal recovery the capture times for the next frames are simply
wrong. Experimentally this affected 2-3 frames and seemed to be related
to the buffer fill level after signal recovery, so drop at least 5
frames and up to fill level + 1 frames in this situation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7106>
Since a buffer resource will occupy at least 64KB,
allocating upload resource per decoding command might not be
an optimal approach. Instead, use sub-region of a upload resource
for multiple decoding command if sub-regions are not overlapped
each other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7108>
- Align `glib_debug`, `glib_assert` and `glib_checks` options with GLib,
otherwise glib subproject won't inherit their value. Previous names
and values are preserved using Meson's deprecation mechanism.
- Add `extra-checks` and `benchmarks` options in the main project so it
can be inherited in GStreamer subprojects.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1165>
When enable parallel encoding, it is possible that the unshown frame
is not output but it is already be marked as a repeated frame header.
So we need to use a dedicated buffer to hold the repeat frame header,
don't mix it with the orignal frame data.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6867>
Schedule (semi-)static resource upload at converter creation time.
And use single resource for all vertex, index, and constant
buffers, since separate resources will waste GPU memory.
Note that size and address of a committed resource are 64K aligned
even if requested buffer size is small.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7081>
If the first buffers have no timestamp then the sink position would be
initialized to 0. The source pad might output this buffer, which would then
initialize the source position to 0 too.
Afterwards two buffers with a valid but huge timestamp might arrive before any
of them are output on the source pad. The first one would set the sink position
to a huge value, the second one would notice that the difference between the
huge value and 0 is certainly larger than max-size-time and consider the queue
as full.
Instead, simply don't update the times from buffers without timestamps and
assume whatever was set before is still valid, i.e. the buffer has the same
timestamp as the previous one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7071>
We were storing the probe id in a different structure (DecodebinOutputStream)
than the pad it is targetting (which is in MultiQueueSlot).
The problem is that when re-targetting outputs (to a different slot)... we would
end up having an invalid probe id, or not have a reference to an existing one.
Instead, store the probe id in the same structure as the pad it's targetting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7069>
As NVIDIA Amperium. In this case the each output buffer is also a DPB,
but using a different view layer.
Still pending a validation layer issue:
VUID-VkVideoBeginCodingInfoKHR-flags-07244
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6954>
query_result_status can be optional so we should not create
the query pool if the queue does not support it,
ie, AMD does not support VK_QUERY_TYPE_RESULT_STATUS_ONLY_KHR
In other use case such as VK_QUERY_TYPE_VIDEO_ENCODE_FEEDBACK_KHR, the
query pool must be created.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7043>
As only queryResultStatusSupport can be optional,
the variable name should be more specific.
queryResultStatusSupport reports VK_TRUE if query type
VK_QUERY_TYPE_RESULT_STATUS_ONLY_KHR and use of
VK_QUERY_RESULT_WITH_STATUS_BIT_KHR are supported.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7043>
According to the SPEC:
The frame id numbers (represented in display_frame_id, current_frame_id,
and RefFrameId[ i ]) are not needed by the decoding process, but allow
decoders to spot when frames have been missed and take an appropriate action.
So we should just print out warning and should not return error in parser when
mismatching. The decoder itself is already robust to handle the reference missing.
Fixes#3622
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7047>
Specify "layout" field in src template to make sure it's
set and gets fixated properly if the downstream element
supports both interleaved and non-interleaved caps.
Fixes
gst_pad_set_caps: assertion 'caps != NULL && gst_caps_is_fixed (caps)' failed
critical with e.g.
gst-launch-1.0 rtpdtmfsrc ! rtpdtmfdepay ! audioconvert ! fakesink
Not that the layout really matters in our case since we always
output mono anyway, but non-interleaved requires adding AudioMeta,
so this is the easiest fix.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7036>
Because DXGI flip mode swapchain will disallow GDI operation
to a HWND once swapchain is configured, videosink has been creating
child window of application's window. However, since window creation
would take a few milliseconds, it can cause performance issue such as
UI freezing. Adding a property so that videosink can attach
DXGI swapchain diretly to application's window in order to improve
performance.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7013>
A large refactoring commit for adding features and improve performance
* Reuse internal converter and overlay compositor:
Converter can be reused as long as input and display formats are not
changed. Also overlay compositor reconstruction is required only if
display format is changed
* Don't wait for full GPU flush on resize or close:
D3D12 swapchain requires GPU idle in order to resize backbuffer.
Thus CPU side waiting is required for swapchain related commands
to be finished. However, don't need to wait for full GPU flushing.
* Support multiple sink on a single external window
Keep installed subclass window procedure even if there's no associated
our internal HWND. This will make window procedure hooking less racy.
Then parent HWND's message will be transferred to our internal HWNDs
if needed.
* Adding support for window handle update
Application can change target HWND even when videosink is playing or
paused state. So, users can call gst_video_overlay_set_window_handle()
against d3d12videosink anytime. The videosink will be able to update
internal state and setup resource upon requested.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7013>
Observed Intel GPU driver crash when multiple decoders are
configured in a process. It might be because of frequent
command queue alloc/free or too many in-flight decoding commands.
In order to make command queue persistent and limit the number of
in-flight command lists, holds global decoding command queue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7019>
This was already being used in handle_frame() for errors that happen when queueing a frame for decoding,
let's do the same when a frame is flagged with an error in the output callback.
From quick testing, this makes seeking more reliable (previously, it would sometimes cause a decoding error
and shut the whole decoder down due to GST_FLOW_ERROR).
Also manually sets the max error count to actually stop processing if too many errors occur.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6446>
ReferenceMissingErr is not critical and the simplest solution is to just ignore it. The frame has
the FrameDropped flag set when it occurs, so we can just drop it as usual.
BadDataErr is also not immediately critical, but in its case let's set the ERROR flag,
so the output loop can use GST_VIDEO_DECODER_ERROR to count and error out if it happens too many times.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6446>
ensure_input_parsebin() has a top comment saying it must be called with
INPUT_LOCK taken, but 2 out of 3 usages of the function call it without
taking that mutex.
This patch adds locking in these two remaining usages.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5279>
Upon fatal errors the loop function will first post an error message
then push out an EOS event.
An application may react immediately to the error message by setting the
state of the pipeline to NULL, meaning by the time we push out the EOS
event PAUSED_TO_READY may have reset the seek seqnum to -1.
While this is harmless, the assertion when setting an invalid seqnum
isn't tidy, fix this by simply not resetting to INVALID as it serves no
practical purpose and the next READY_TO_PAUSED will select a new seqnum
anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7032>
Adding NVIDIA nvCOMP library based plugin for lossless raw video
compression/decompression. To build this plugin, user should
install nvCOMP SDK first and specify the SDK path via
"nvcomp-sdk-path" build option or NVCOMP_SDK_PATH env.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6912>
Musl does not implement GNU basename and have fixed a bug where the
prototype was leaked into string.h [1], which resullts in compile errors
with GCC-14 and Clang-17+
| sys/uvcgadget/configfs.c:262:21: error: call to undeclared function 'basename'
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
| 262 | const char *v = basename (globbuf.gl_pathv[i]);
| | ^
Use glib function instead makes it portable across musl and glibc on
linux
[1] https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7a
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7006>
Certain V4L2 drivers can report that a video receiver is seeing
some signal, but that it is unable to synchronize to it. IOW: the driver
can sometimes report V4L2_IN_ST_NO_SYNC and not report V4L2_IN_ST_NO_SIGNAL.
In particular, I've seen the tc358743 (HDMI-to-CSI2 converter) driver
sometimes report this when deployed to a fleet of embedded Raspberry Pis.
The relevant kernel code is in [1]. The video output is not practically
usable when V4L2_IN_ST_NO_SYNC is reported (only visually corrupted frames,
sometimes with random "snow", are received). I assume that this happens when
either the HDMI cable is poorly plugged in or damaged or when a CSI2 FFC
cable is used and is damaged.
The change in this commit is useful for detecting this working-but-not-really
condition in application code. Applications already listening for the "Signal lost"
message will gain the ability to handle this condition.
There seem to be more V4L2 error flags like this, see [2]. However, I do not
have practical experience with them and adding only V4L2_IN_ST_NO_SYNC seems
like a safer option.
[1]: https://github.com/raspberrypi/linux/blob/be8498ee21aa/drivers/media/i2c/tc358743.c#L1534
[2]: https://www.kernel.org/doc/html/v6.6/userspace-api/media/v4l/vidioc-enuminput.html
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7021>
The initial goal was to support the case where we are paused watching a live
stream, and when we resume we can no longer resume from the previously
downloaded position. In that case we internally do a flushing seek back to the
"current live head position". This was also extended since to be able to
handle (utterly broken) servers when we can't really figure out where we are
anymore and therefore trigger that lost sync so we can try to get back on our
feet.
This does fix the issue... but results in spurious FLUSH_{START|STOP} events
being sent downstream. While that's fine for regular playback scenarios, it's a
bit of a wild scenario since a lot of pipelines/applications don't expect such
events when it wasn't triggered by downstream/application.
Fixes#3605
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7005>
This fixes a regression introduced by 6c4f52ea20
There are cases where the input stream will be push-based, time-segment and not
have a collection nor caps. This means the event-based checks are not sufficient
to decide when/where to plug in a identity or parsebin to process the input.
For those corner cases we setup a buffer probe to ensure we always end up with
at least a parsebin
Fixes#3609
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7010>
It can be seen as a WA in the case of multi-channel transcoding (like
decoder output to two channels, one for encoder and one for vpp).
Normally, encoder sets min pts of a huge value to avoid negative dts,
while vpp set pts without this addtional huge value, which are likely to
cause input surface pts does not fit with encoder (since both encoder
and vpp accept the same buffer from decoder, means they modify the timestamp
of one mfx surface). So we add this huge value to vpp to ensure enc and
vpp set the same value to input mfx surface meanwhile does not break
encoder's setting min pts for dts protection.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6971>
Adding a property to control error reporting behavior when output
window is closed in playing or paused state. This can be useful
for apps where an app wants to close window even if it's playing
a stream, and the closed window is expected.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6939>
The typefind code was rejecting content smaller than 128 bytes making it
impossible to play files with very small srt files.
But those can actually be properly detected so fix typefind to allow
smaller content and try its best with it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6937>
When measuring video latency, one mechanism involves taking a photo
with a camera of two screens showing the test video overlayed with
timeoverlay or clockoverlay. In these cases, if the display's pixel
response time is crappy, you will see ghosting due to which it can be
quite difficult to discern what the current timestamp being shown is.
This commit adds a property that *also* shows the timestamp in
a different (sequentially predictable) location every frame, which
makes it easy to tell what the latest rendered timestamp is.
For bonus points, you can also use the fade-time of the previous frame
to measure with sub-framerate accuracy when the photo was taken, not
just clamped to the framerate, giving you a higher precision latency
value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6935>
This attempts to implement the gtkglsink element on Windows using WGL,
as there were some more gotchas that are along the way, since we need to
juggle with libepoxy along the way, meaning that we need a recent
GTK+-3.24.x for this to work properly, i.e. the upcoming GTK+-3.24.43.
Since we are essentially using an overlay compositor only during
rendering, move its initialization and destruction into the
gtk_gst_gl_widget_render() function, so that things are safer as we are
doing things across threads between gstreamer (gst-gl) and GTK, as GL
operations, as above, have more gotchas on Windows.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4289>
When dealing with push-based inputs, we are now delaying the creation of
parsebin/identity until we get all pre-buffer events.
We therefore can simplify the handling of new pads being linked and only have to
check if upstream can handle pull-based or not.
Avoids creating parsebin for parsed upstream data altogether
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6953>
Simple gst_gl_sync_meta_wait() is not sufficient to ensure GL commands
are executed before dma-buf devices get to see the buffer.
This is the first step that should make the code behave correctly for
everybody, although there may be performance penalty. In the future we
should introduce a more general sync meta that would allow to move the
waiting from gldownload (the producer) to the sink elements (the
consumers).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6968>
Not all GPUs can support arbitrary offset of
D3D12_PLACED_SUBRESOURCE_FOOTPRINT when copying GPU memory between
texture and buffer. Instead of calculating size/offset per plane,
calculate the entire size and offsets at once.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6967>
drm_fourcc.h should be picked up via the pkgconfig include, not the
system includedir directly.
Also consolidate the libdrm usage in va and msdk.
All this allows it to be picked up consistently (via the subproject,
for example).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6932>
This patch fixes this critical warning when registering MSDK:
_dma_fmt_to_dma_drm_fmts: assertion 'fmt != GST_VIDEO_FORMAT_UNKNOWN' failed
It was because the HEVC string with possible output formats has an extra space
that could not be parsed correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6853>
The name is already passed via the signal parameters so it doesn't have
to be retrieved again via GstObject API, which would crash on other
GObjects. Child proxy child objects can be any kind of GObject and the
code here otherwise handles this correctly already.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6938>
When transforming from unknown alignment to frame or obu, the TU timestamp
was not properly transferred. Fix this by saving the TU DTS as the first
DTS seen within the the TU data, and the PTS as the last PTS seen in that
TU data. Finally, reset the TU timestamp after each TU have completed.
Fixes#1496
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6895>
Some servers might not provide 100% matching PDT when doing updates, or accross
variants. This would cause the code matching segments using PDT to fail if the
segment PDT was 1 microsecond (or whatever small value) before the candidate
segment. And would pick the (wrong) following segment as the matching one.
In order to be more tolerant when matching, we instead check whether the
candidate segment is within the first segment of the segment we are trying to
match.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
If we end up with a segment with an internal time that varies from the supposed
one, this could be for two reasons:
* We guess-timated the wrong segment to go to when advancing or switching
variants. In that case we try to find the actual segment to go to (just before
this change).
* There was a complete playlist change (for whatever reason) and we can't find a
replacement. In that case we want to carry on playback from this position but
need to remember that we moved (by setting the stream to DISCONT, and
resetting the new mapping).
Fixes playback on several broken stream
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
Since the default value of `m3u8->discont_sequence` (before parsing of the
playlist data) was 0 .. we would never properly detect the presence of that
field if it was present with a value of 0.
This would later on cause havoc in playlist synchronization where we would
assume it didn't have a discontinuity sequence specified (whereas it did, and it
was 0).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
A lot of streams will do a poor job of estimating proper duration of fragments
in the playlist, but over several fragments have it correct.
Instead of constantly trying to realign the estimated stream time, allow for a
more realistic tolerance of 3-4 video frames
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
When updating playlists, we want to know whether the updated playlist is
continuous with the previous one. That is : if we advance, will the next
fragment need to have the DISCONT buffer set on it or not.
If that happens (because we switched variants, or the playlist all of a sudden
changed) we remember that there is a pending discont for the next fragment. That
will be used and resetted the next time we get the fragment information.
Previously this was only partially done. And it was racy because it was set
directly on `GstAdaptiveDemux2Stream->discont` when a playlist was updated,
instead of when the next fragment was prepared.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
When dealing with live streams, the function was assuming that all segments of
the playlist had valid stream_time. But that isn't TRUE, for example in the case
of failing to synchronize playlists.
Fixes losing sync due to not being able to match playlist on updates
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6610>
Even if no new synchronization information is available.
This is necessary because the timestamp offset logic in rtpbin depends
on the base RTP time that is determined by the jitterbuffer, but this
changes all the time (especially in mode=slave) and the timestamp
offsets have to be updated accordingly. Doing so is especially important
if they're only determined by the RTP-Info, which never changes from the
very beginning.
The interval can be configured via the new min-sync-interval property.
Synchronization happens at least that often, but at most as often as the
old sync-interval property allows.
Both intervals are now based on the monotonic system clock.
Additionally, clean up synchronization code a bit, only emit either
inband NTP or RTCP SR synchronization at the same time, based on which
one has the more recent time information, and only emit RTP-Info
synchronization if it wasn't provided previously at the same time as the
NTP-based synchronization information.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
There is generally no requirement to ignore RTCP SR if the RTP time of
the SR differs a lot from the last received RTP packet. The mapping
between RTP and NTP time stays valid until there was a stream reset, in
which case we wouldn't use that information anyway.
When using rtcp-sync-send-time=false the default of 1s difference can
easily be exceeded, e.g. if encoding of the stream after capture adds
more than 1s of latency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Never is useful for some RTSP servers that report plain garbage both via
RTCP SR and RTP-Info, for example.
NTP is useful if synchronization should only ever happen based on RTCP
SR or NTP-64 RTP header extension.
Also slightly change the behaviour of always/initial to take RTP-Info
based synchronization into account too. It's supposed to give the same
values as the RTCP SR and is available earlier, so will generally cause
fewer synchronization glitches if it's made use of.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Instead of switching on the very first stream, require that all streams
have switched before switching to the different synchronization
mechanism.
Without this there will be a noticeable gap during the switch. E.g. when
going from RTP-Info to NTP-based association, first the first stream
only would get an offset, then the first two, ... then all of them.
Depending on the order of streams this will cause a lot of changes in
ts-offset during the transition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Previously these parameters were randomly changed in the body of the
function to avoid having to declare a new variable, which made the code
very hard to follow. By marking them as const this won't be possible
anymore in the future.
Also the RTP clock-base (RTP time from RTSP RTP-Info) is an unsigned
64 bit integer as it's an extended RTP timestamp.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Both were entangled previously and very hard to follow what happens
under which conditions. Now as a very first step the code decides which
of the two cases it is going to apply, and then proceeds accordingly.
This also avoids calculating completely invalid values along the way and
even printing them int the debug output.
Also improve debug output in various places.
This shouldn't cause any behaviour changes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
This simplifies the code as it's a much simpler case than the normal
inter-stream synchronization, and interleaving it with that only
reduces readability of the code.
Also improve some debug output in this code path.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6543>
Adds a separate vtenc_h265a element (with a _hw variant as usual) for the HEVCWithAlpha codec type.
Decided to go with a separate element to not break existing uses of the normal HEVC encoder.
The preserve_alpha property is still only used for ProRes, no need for it here because we explicitly say we want alpha
when using the new element.
For now, the HEVCWithAlpha has an issue where it does not throttle the amount of input frames queued internally.
I added a quick workaround where encode_frame() will block until enqueue_frame() callback notifies it that some space
has been freed up in the internal queue. The limit was set to 5, which should be enough I guess? Hopefully this is not
too prone to race conditions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6664>
When we are dealing with parsed inputs (i.e. using identity), we need to ensure
that we have a valid stream collection (and therefore DBCollection) before
anything flows dowsntream.
In those cases, we hold onto those events until we get such a collection.
Fixes#3356
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
This commit separates collection and selections into a new separate structure:
DecodebinCollection.
This provides a much cleaner/saner way of dealing with collections being
updated, gapless playback, etc...
There is now a list of DecodebinCollection in flight, of which two are special:
* input_collection, the currently inputted/merged collection
* output_collection, the currently active collection on the output of multiqueue
Handling GST_EVENT_SELECT_STREAMS is split, by looking for the collection to
which it applies. And the requested streams are stored in it. IIF that
collection is output_collection we can do the switch, else it will be updated
when it becomes active.
Detecting which collection/selection is active is done by looking at the
GST_EVENT_STREAM_START on the output of the multiqueue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6774>
