H.265 NAL always have 2 bytes of headers. Unlike the H.264 parser, this parser
will simply return that there is NO_NAL if some of these bytes are missing.
This is then properly special cased by parsers and decoders. Add a test to
ensure we don't break this in the future.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3234>
The appropriate return value for incomplete NAL header should be
GST_H264_PARSER_NO_NAL_END. This tells the parser element to
gather more data. Previously, it would assume the NAL is corrupted
and would drop the data, potentially causing stream corruption.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3234>
The flowcombiner and active_streams shouldn't be cleared in the
mse-bytestream variant, only in the mss-fragmented one. Otherwise the
soft reset leaves qtdemux in a state where it still believes that it has
streams, but they've been cleared. In that case, a null pointer
dereference happens and the app crashes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4199>
Previously, reassigning loop index l in nicestream.c
could cause a segfault if l->data was null, as it could
reassign l to a null variable, triggering the loop
postassignment l->next, which then segfaults due to
l now being null. It is instead moved into the loop.
_delete_transport already performs the reassignment
inline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4192>
In gst_video_info_dma_drm_to_caps() the caps are newly created, so there's no
need for make it writable. In gst_video_info_dma_drm_from_caps() a copy of the
caps is done, which implies a gst_caps_make_writable().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4195>
In webrtc_data_channel_send functions, both data and string,
an early return on a non-open datachannel caused it to leak
the buffer used for pushing to appsrc, meaning any buffer
sent after leaving the open state was leaked in full.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4191>
When using such a launch line:
fakesrc ! "audio/x-opus, channel-mapping=(int)<0, 1>" ! fakesink
the caps string, with spaces escaped but no quotes gets passed to
gst_caps_from_string(), which then fails to parse the array because it
contains spaces.
When using an explicit capsfilter instead:
fakesrc ! capsfilter caps="audio/x-opus, channel-mapping=(int)<0, 1>" ! fakesink
the caps string, with spaces escaped and quotes gets passed through
gst_value_deserialize, which first calls gst_str_unwrap() on it and only
then gst_caps_from_string() on the result.
This fixes the inconsistency by using a custom version of str_unwrap()
in the parser, which doesn't expect a quoted string.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4181>
When copying a buffer, for example with gst_buffer_make_writable(), the
new buffer might reference the same GstMemory as the src buffer,
making those memories not writable. If the src buffer gets disposed
first it should return to its buffer pool, but since some of its
memories are not writable it gets discarded and new buffer/memory gets
allocated.
Solves this by making the new buffer keep a reference to the src buffer,
that ensures that by the time the src buffer gets disposed no other
buffer are referencing its memories and it can thus return safely to its
pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4176>
gst_buffer_add_parent_buffer_meta() is used when a GstBuffer uses
GstMemory from another buffer that was allocated from a pool. In that
case we want to make sure the buffer returns to the pool when the memory
is writable again, otherwise a copy of the memory is created. That means
the child buffer must drop its ref to the memory first, then drop the
ref to parent buffer so it can return to the pool when it is the only
owner of the memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4176>
This is already done for every other calls to send_packet. The deadlock occures
since FFMPeg 6.0. The decoder tries to get a buffer from a thread during
the draining process, and blocks trying to get the video decoder stream lock
already heald by the drain function.
Fixes#2383
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4171>
If the input is not a DMABuf, attempt to copy into a DRM Dumb
buffer and import it has a DMABuf. This will offload the
compositor from actually doing this copy (needed to handle SHM)
and may allow the software decoded stream to be rendered to
an HW layer, or even reach through some better accelerated
GL import path.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
This allow simplifying the GstVideoInfo handling in the sinks. Instead
of having to update a video info for the import, the sink can simply pass the
video info associated with the caps and rely on the VideoMeta in the GstBuffer
to obtain the appropriate offset and stride.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
As we don't render into the widget directly, there is no "initial" draw
happening. As a side effect, the internal aspect ratio adapted display
width/height is never initialize leading to assertions when handling navigation
events.
gst_video_center_rect: assertion 'src->h != 0' failed
Simply queue a redraw after setting the widget format in order to fix the issue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
This allow allocating memory from any DRM driver that supports this
method. It additionally allow exporting DMABuf. This allocator depends
on libdrm and will be stubbed if the dependency is missing. This is derived
from kmssink dumb allocator.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
GStreamer 1.18 changed the serialization of enums.
This patch updates gsttr-stats.py to handle the new format.
In absence of that, the script was failing like this:
```
Traceback (most recent call last):
File "/home/ntrrgc/Apps/gstreamer/./subprojects/gst-devtools/tracer/gsttr-stats.py", line 224, in <module>
runner.run()
File "/home/ntrrgc/Apps/gstreamer/subprojects/gst-devtools/tracer/tracer/analysis_runner.py", line 42, in run
self.handle_tracer_entry(event)
File "/home/ntrrgc/Apps/gstreamer/subprojects/gst-devtools/tracer/tracer/analysis_runner.py", line 27,
in handle_tracer_entry
analyzer.handle_tracer_entry(event)
File "/home/ntrrgc/Apps/gstreamer/./subprojects/gst-devtools/tracer/gsttr-stats.py", line 114, in handle_tracer_entry
key = (_SCOPE_RELATED_TO[sv.values['related-to']] + ":" + str(s.values[sk]))
KeyError: 'thread'
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4155>
gstcudaloader.cpp defines GST_DEBUG_CATEGORY (gst_cudaloader_debug);
but it wasn't initializing it anywhere.
This caused the following error to be logged by gst-plugin-scanner when
libcuda.so.1/nvcuda.dll couldn't be loaded, e.g. in systems without
CUDA:
(gst-plugin-scanner:39618): GStreamer-CRITICAL **: 14:40:22.346:
gst_debug_log_full_valist: assertion 'category != NULL' failed
This patch fixes the bug by initializing the category in
gst_cuda_load_library_once_func() before any logging occurs.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4154>
This patch adds documentation to the 'log' tracer and amends the design
document of Tracers to replace a misleading example of the 'log' tracer
with a different example that uses tracer arguments with tracers that do
actually handle said arguments.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4153>
These days you're can use minFrameDuration and maxFrameDuration which
are CMTime with fractional values. That way we don't need to convert
between double and fractions in a really weird way.
This fixes really odd fractional values exposed in caps, like:
2000000/76923, 1000000/37037, 5000000/178571, 10000000/344827, 10000000/333333
Which are actually just 26/1, 27/1, 28/1, 29/1, 30/1
We can also delete a lot of outdated code for iOS versions older than
7.0 by using newer APIs.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4134>
This fixes simplification of caps with GstFractionRange structures,
for example, this caps:
video/x-raw, framerate=(fraction)5/1; video/x-raw, framerate=(fraction)[ 5/1, 30/1 ]
can now be simplified to:
video/x-raw, framerate=(fraction)[ 5/1, 30/1 ]
instead of:
video/x-raw, framerate=(fraction){ 5/1, [ 5/1, 30/1 ] }
And this:
video/x-raw, framerate=(fraction)[ 2/1, 5/1 ]; video/x-raw, framerate=(fraction)[ 5/1, 30/1 ]
can be simplified to:
video/x-raw, framerate=(fraction)[ 2/1, 30/1 ]
instead of
video/x-raw, framerate=(fraction){ [ 2/1, 5/1 ], [ 5/1, 30/1 ] }
This fixes overly-complicated GL caps set by avfvideosrc on macOS and
iOS when capturing from a webcam.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4132>
Removing a meta from a buffer means one doesn't have access to it
anymore. Instead use the already reffed composition directly.
Fixes a use-after-free in the following pipeline:
... ! vulkanupload ! timeoverlay ! vulkanoverlaycompositor ! ...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4143>
As specified in EIA/CEA-608-B section 8.4:
When closed captioning is used on line 21, field 2, it shall conform
to all of the applicable specifications and recommended practices as
defined for field 1 services with the following differences:
a) The non-printing character of the miscellaneous control-character pairs
that fall in the range of 14h, 20h to 14h, 2Fh in field 1, shall be replaced
with 15h, 20h to 15h, 2Fh when used in field 2.
b) The non-printing character of the miscellaneous control-character pairs
that fall in the range of 1Ch, 20h to 1Ch, 2Fh in field 1, shall be replaced
with 1Dh, 20h to 1Dh, 2Fh when used in field 2.
This means simply switching the "field" field in the caps isn't enough for
converting raw 608 from one field to another, some control codes also
need to be amended.
+ Adds simple test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4126>
GstBufferPool implementation was referenced for this GstD3D11PoolAllocator,
for example GstAtomicQueue, various atomic operations, and GstPoll ones.
However, such combination seems to be almost pointless
since gst_poll_{read,write}_control() takes mutex and also
GstPoll uses Win32 event handle internally.
Use simple SRWLOCK and CONDITION_VARIABLE instead, and don't make things
complicated/inefficient.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2887>
When we run Cheese 41.1 on our imx platform, Cheese preview freeze
at first frame.
During pipeline state changing from NULL to PLAYING, if there are
both elements that state change asynchronously and state change
with no preroll in the bin, the element inside may send ASYNC_DONE
message to it, while the bin's pending state is VOID_PENDING.
In this case, the bin will not post ASYNC_DONE message to parent
bin, which makes parent bin thinks that there are still elements
in it that haven't completed state changing, causing the pipeline
freeze in an intermediate state.
This commit modifies the bin_handle_async_done() function. When the
bin, whose pending state is VOIDING_PENDING, receives the ASYNC_DONE
message, it will also post this message to its parent bin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3490>
A flush is resetting or not depending on the reset_time argument in the
FLUSH_STOP event is set.
Resetting flushes reset the running time to zero and clear any existing
segment. These are the kind of flushes used by flushing seeks, and by far the
most common. Non-resetting flushes are much more niche, used for instance for
quality changes in adaptivedemux2 and MediaSource Extensions in WebKit.
A key difference between the seek use case and the quality change use case is
that the latter is much more removed from the player. Seeks generally occur
because an user request it, whereas quality changes can be automatic.
Currently, there are three notable cases where position queries fail:
(a) before pre-roll, as there is no segment yet. This is one is understandable,
as for at least some time before pre-roll, we cannot know if a media stream
would start at 0 or any other position, or the duration of the stream for that
matter.
(b) after a resetting flush caused by a seek. This kind of flush resets the
segment, so it's not surprising position queries fail. This is inconvenient for
applications, as it means they always need to handle position reporting (e.g.
in UI) separately every time they request a seek, e.g. by caching the seek
target and using it when the position query fail. I'm not fond of this
behavior, as it's unintuitive and makes GStreamer harder to use, but at this
point could be difficult to change and it's not within the scope of this
proposal.
(c) after a non-resetting flush, e.g. caused by a quality change. The segment
is not reset in this case. Position queries work until a FLUSH_STOP is sent.
Querying position after a FLUSH_START but before a FLUSH_STOP works, and
returns the position the sink was at the moment the FLUSH_START was received.
**This in fact the only reliable way (short of adding probes to the sink
element) to get this position**, as FLUSH_START receival is asynchronous with
playback.
In the case (c), as of currently, position queries fail once the FLUSH_STOP is
received. But unlike in (b), the application has no position to fall back to,
as the FLUSH_START was initiated by elements inside the pipeline that are in a
lower layer of abstraction. Specific applications that have control of both the
player and the internal element doing the flushing -- such as WebKit -- can
still work around this problem through layer violations (lucky!), but this
still puts in question this behavior in GStreamer.
This patch fixes this case by amending the position query handler of basesink,
which was previously erroneously returning early with "wrong state", even
though the flush occurs in PAUSED or PLAYING.
A unit test checking this behavior has also been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3471>
The code wants to prepend one byte to every byte pair. It correctly did
so by working backwards pair-wise, but then didn't work backwards
instead of each individual pair / future triplet, overwriting
information before attempting to read it.
The code also failed to update the len pointer after prepending.
This fixes both issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4100>
The abort() method of SourceBuffer in Media Source Extensions is
expected to flush the demuxer and discard the current fragment,
if any. The configuration of tracks, if any, should be preserved.
qtdemux has different behavior for flush events depending on the
context.
This patch activates the intended behaviour only for streams of the
VARIANT_MSE_BYTESTREAM type, conformant to the ISO BMFF Bytestream
specification[1]. This flush behaviour is the same as the one
already in use for adaptivedemux sources.
[1] https://www.w3.org/TR/mse-byte-stream-format-isobmff/https://bugzilla.gnome.org/show_bug.cgi?id=795424
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4101>
Removing sockets from the epoll for cancellation is unreliable and might
not be thread-safe. Rather, have SRT watch a FD from the cancellable if
available. Keep the cancellable cancelled while we're not open.
Use the regular single-socket `sock` and `poll_id` fields for the
listening thread instead of duplicating them.
Before polling we need to check the socket state. SRT closes broken
sockets by itself and when the epoll contains our cancellation FD it can
no longer be empty, which was an error before.
Treat more failures in the read and write operations as an opportunity
to try a reconnect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4087>
Seems that SRT can remove the socket from the poll by itself when the
connection gets closed. Consider this an error condition and ensure we
only "abort successfully" when we're actually trying to unlock.
Needs more investigation but this is enough to prevent the element from
getting stuck not reporting an error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4087>
In tests in the rust bindings we end up with 2 thread initializing
concurrently, and it should not be a problem, -validate should be MT
safe.
Using a recursive mutex as we might recursively init for some reason
and we are not on the hot path here in any case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4089>
Recursively invoking the NSMainLoop can cause crashes in
applications that don't expect it. Instead of waiting for
permission to be granted, move the wait later - until we
actually need device permissions when starting the capture
session. That moves the wait into the streaming thread
instead of the application thread that's setting the pipeline
state to READY.
Instead of a manual state change implementation to open
and close the device, use the basesrc start/stop methods that
are intended for the purpose.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4083>
There may be garbage or some bits before a SOI comes in some problematic
mjpeg streams. For example, some network error may cause the EOI marker
of the previous frame lost, and when the new frame's SOI comes, we still
use the state of the last frame, which will generate errors.
For this kind of frames without EOI, if that frame already has some data
(the SOS segment is detected), we still push it as a frame with CORRUPTED
flag set. But if not, we just discard all the data before the new SOI.
Co-Authored-By: Víctor Jáquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4039>
The previous implementation was a bit primitive, assuming the subclass
had registered a template name starting with sink_ . Instead make
the effort of parsing the actual template name, and use that to generate
the final pad name.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4032>
This patch prevents a possible race condition from taking place between the EOS event handling and rtcp send
function/thread.
The condition starts by getting the GST_EVENT_EOS event on the send_rtp_sink pad, which causes two core things
to happen -- the event gets pushed down to the send_rtp_src pad and all sessions get marked "bye" prior to
completion of the event handler. In another thread the rtp_session_on_timeout function gets called after an
expiration of gst_clock_id_wait in the rtcp_thread function. This results in a call to the
ess->callbacks.send_rtcp(), which is configured as a function pointer to gst_rtp_session_send_rtcp via the
RTPSessionCallbacks structure passed to rtp_session_set_callbacks in the gst_rtp_session_init function.
In the race condition, the call to gst_rtp_session_send_rtcp can have the all_sources_bye boolean set to true
while GST_PAD_IS_EOS(rtpsession->send_rtp_sink) evaluates to false. This is the result of gst_rtp_session_send_rtcp
running before the send_rtp_sink's GST_EVENT_EOS handler completes. The exact point at which this condition occurs
is if there's a context switch to the rtcp_thread right after the call to rtp_session_mark_all_bye in the
GET_EVENT_EOS handler, but before the handler returns.
Normally, this would not be an issue because the rtcp_thread continues to run and indirectly call
gst_rtp_session_send_rtcp. However, the call to rtp_source_reset sets the sent_bye boolean to false, which ends up
causing rtp_session_are_all_sources_bye to return false. This gets passed to gst_rtp_session_send_rtcp and the EOS
event never gets sent.
The race condition results in the EOS event never getting passed to the rtcp_src pad, which prevents the bin and
pipeline from ever completing with EOS.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3798>
These checks were introduced to prevent exposing ARGB64/RGBA64 in the caps
when running on M1 Pro/Max with macOS <13 because of a bug in VideoToolbox.
Unfortunately, the initial buffer size of 15 is too short when running
in a VM - the CPU brand string there looks like "Apple M1 Pro (Virtual)",
which due to its length causes sysctlbyname to return -1, resulting in
broken formats still showing up in the caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4080>
We did several things to enable the new memory logic in msdkdec:
(1) We always use video memory for decoder in linux path;
(2) We give negotiated pool to alloc_pool stored in GstMsdkContext which
will be used in callback mfxFrameAllocator:Alloc to alloc surfaces as
MediaSDK needs, and this pool is also available for decoder itself;
(3) We modify decide_allocation process, that is we make pool negotiaion
before gst_msdk_init_decoder to ensure the pool is decided and ready for
use in mfxFrameAllocator:Alloc callback; then we will consider the case
when we need to do the gpu to cpu copy.
(4) In gst_msdkdec_finish_task, we modify the way for copy following the
logic in (3).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3439>
Add a pool creation function name as 2 for later use which will create
va pool for video memory in linux and keep system pool for windows.
This gst_msdkdec_create_buffer_pool2 will replace gst_msdkdec_create_buffer_pool
when all the memory allocation modifications are ready in the commits after.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3439>
Rewrite gst_msdk_frame_alloc and name it as xxx_2 before applying it.
It uses negotiated bufferpool stored in GstMsdkContext to allocate buffers
in the callback MfxFrameAllocator:Alloc, then extract VASurface from buffer,
wrap it as mfxMemIDs and pass these IDs to MediaSDK/oneVPL.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3439>
The `add_candidate` vfunc of the GstWebRTCICE interface gained a GstPromise
argument, which is an ABI break. We're not aware of any external user of this
interface yet so we think it's OK.
This change is useful in cases where the application needs to bubble up errors
from the underlying ICE agent, for instance when the agent was given an invalid
ICE candidate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3960>
The signal triggers an asynchronous task on the PC thread but in some cases it
can be useful for apps to be notified when the task completed. This method of
the PeerConnection spec also returns a Promise so the interface is now more
coherent with the spec.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3960>
Read and flush console buffer from the console thread immediately,
instead of main thread. Otherwise (if main thread is busy)
the console thread will keep adding idle source and then main thread
will be unresponsive.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4067>
The av1decoder class does not implement the ->parse() virtual function,
and we always need to add the av1parse element before it. So we should
set_needs_format of the decoder to TRUE, then if no parse before it, it
can fail with a "not-negotiated" error early, rather than go on and
generate unexpected error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4064>
The vp9decoder class does not implement the ->parse() virtual function,
and we always need to add the vp9parse element before it. So we should
set_needs_format of the decoder to TRUE, then if no parse before it, it
can fail with a "not-negotiated" error early, rather than go on and
generate unexpected error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4064>
The vp8decoder class does not implement the ->parse() virtual function,
it can only accepts frame aligned data. If some element such as filesrc
feed it with unaligned data, the behaviour is undecided. So we should
set_needs_format of the decoder to TRUE, then it can fail with a
"not-negotiated" error early, rather than go on and generate unexpected
error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4064>
The mpeg2decoder class does not implement the ->parse() virtual function,
and we always need to add the mpegvideoparse element before it. So we should
set_needs_format of the decoder to TRUE, then if no parse before it, it
can fail with a "not-negotiated" error early, rather than go on and
generate unexpected error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4064>
The h264decoder class does not implement the ->parse() virtual function,
and we always need to add the h264parse element before it. So we should
set_needs_format of the decoder to TRUE, then if no parse before it, it
can fail with a "not-negotiated" error early, rather than go on and
generate unexpected error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4064>
The h265decoder class does not implement the ->parse() virtual function,
and we always need to add the h265parse element before it. So we should
set_needs_format of the decoder to TRUE, then if no parse before it, it
can fail with a "not-negotiated" error early, rather than go on and
generate unexpected error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4064>
Raw 608 caps can now contain a "field" field. On the input side it
signifies that the input raw 608 is attached to either field 0 or 1,
on the output side it allows selecting whether to extract the raw 608
data for field 0 or 1 for field-aware formats.
In addition, it is also allowed to use ccconverter to "convert" 608
field 0 to 608 field 1 (and conversely), this is passthrough as the
change only needs to happen in the caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4031>
These parameters are not actually `out` parameters but must
be allocated and zero-initialized by the calling function.
Marking them as `out caller-allocates` will cause memory
corruptions when calling these APIs from e.g., Python code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4051>
The dimension of the overlay texture directly corresponds to the size of the overlay **buffer** which is given by its video meta.
The dimension at which the overlay should be displayed directly correspond to the overlay `render_width`and `render_height`.
This match the behavior of glimagesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4046>
It's only malformed data in APP when its length is less than 6 chars,
because it should have at least an id string. Otherwise, if the id string
is not handled, no warning is raised, only a debug message noticing it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3943>
Fixes the following valgrind error:
==616== Conditional jump or move depends on uninitialised value(s)
==616== at 0x4900E34: gst_debug_print_object (gstinfo.c:1143)
==616== by 0x49010B6: gst_info_printf_pointer_extension_func (gstinfo.c:1215)
==616== by 0x4959FDB: __gst_printf_pointer_extension_serialize (printf-extension.c:47)
==616== by 0x495A487: printf_postprocess_args (vasnprintf.c:258)
==616== by 0x495A52C: __gst_vasnprintf (vasnprintf.c:290)
==616== by 0x4959F8F: __gst_vasprintf (printf.c:154)
==616== by 0x4901C1F: gst_debug_message_get (gstinfo.c:791)
==616== by 0x4901C75: _gst_debug_log_preamble (gstinfo.c:1431)
==616== by 0x4903208: gst_debug_log_default (gstinfo.c:1575)
==616== by 0x49020BA: gst_debug_log_full_valist (gstinfo.c:624)
==616== by 0x490211D: gst_debug_log_valist (gstinfo.c:656)
==616== by 0x49021AD: gst_debug_log (gstinfo.c:533)
==616== by 0x48DDC11: gst_buffer_copy_into (gstbuffer.c:693)
==616== by 0x48DF5F1: gst_buffer_copy_with_flags (gstbuffer.c:727)
==616== by 0x48DF640: gst_buffer_copy_deep (gstbuffer.c:756)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4034>
When the QoS stats are reset (e.g. changing the source) the counters for
dropped + rendered frames are reset to zero which result in negative values
for their difference. This results in max-fps getting pegged at an extremely
high value.
```
fpsdisplaysink.c:373:display_current_fps:<fpsdisplaysink0> Updated max-fps to 36840705952231460864.000000
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3989>
Makes "start-bitrate" work without setting "connection-speed" property. Having
another property set as a requirement for this one to work is unexpected.
This commit allows to request some initial bitrate for first segment, then
go into adaptive streaming for the rest of media playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3895>
When constructing an output profile using --profile-from, it is useful
to be able to override the top level container profile.
Expose a --container-profile option that applies as an override after
other methods for constructing an output profile have run. If no other
method was used, this will result in an empty top level container.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3977>
Instead of creating new decoder instance per new sequence,
re-use configured decoder instance via cuvidReconfigureDecoder()
API. It will make output surface reusable without re-allocation.
Also, in order for application to be able to reserve higher resolution
output surface, "init-max-width" and "init-max-height" properties are
added to each decoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3884>
Call input resource map functions (i.e., nvEncRegisterResource,
nvEncUnregisterResource, nvEncMapInputResource, and
nvEncUnmapInputResource) only once and reuse the mapped resources,
instead of per input frame map/unmap
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3884>
Wrap mapped decoder output surface using GstCudaMemory and
output without any copy operation. Also, for application to be able to
control the number of zero-copyable output surfaces,
"num-output-surfaces" property is added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3884>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams. The samples will not be located and
eventually playback will error out. So compensate assuming data
is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams.
The samples will not be located and eventually playback will
error out. So compensate assuming data is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
When uridecodebin exposes pads for its streams, we immediately ghost
the relevant (selected) one and let composition send a seek as soon as a
buffer is probed.
This means that sometimes uridecodebin is still linking elements
internally (for non-selected streams) and sees flush events travel down
the elements it is still busy trying to link / forward sticky events to.
This causes all sorts of nasty issues, which can be avoided by simply
blocking all data flow from the source until no-more-pads has been
emitted by uridecodebin (or whatever sub_element is wrapped).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3971>
This most likely never caused any issues as we don't connect to
no-more-pads in the first place, and the element isn't directly exposed
to the user, but emitting it makes no sense, and we are actually going
to connect to no-more-pads in a subsequent commit.
The call was added in 86b893e54c, a patch
by me in 2013, I have no idea why but I probably didn't have a firm
grasp on what I was doing then.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3971>
this is an issue seen with musl based linux distros e.g. alpine [1]
musl is not going to change this since it breaks ABI/API interfaces
Newer compilers are stringent ( e.g. clang16 ) which can now detect
signature mismatches in function pointers too, existing code warned but
did not error with older clang
Fixes
gstv4l2object.c:544:23: error: incompatible function pointer types assigning to 'gint (*)(gint, ioctl_req_t, ...)' (aka 'int (*)(int, unsigned long, ...)') from 'int (int, int, ...)' [-Wincompatible-function-pointer-types]
v4l2object->ioctl = ioctl;
^ ~~~~~
[1] https://gitlab.alpinelinux.org/alpine/aports/-/issues/7580
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3950>
This fixes a compile error with recent upstream FFmpeg.
The AV_CODEC_CAP_AUTO_THREADS was deprecated and renamed to
AV_CODEC_CAP_OTHER_THREADS in FFmpeg upstream commit
7d09579190de (lavc 58.132.100).
The AV_CODEC_CAP_AUTO_THREADS was finally removed in FFmpeg upstream
commit 10c9a0874cb3 (lavc 59.63.100).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3951>
The encoder does not support reconfiguration, and only deinitializing it
and then initializing it again causes deadlocks.
Also only reconfigure and drain the encoder if the video info has
actually changed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3957>
Fixes#1358.
Passing ARGB64/RGBA64 to vtenc caused the encoding to fail
when running on M1 Pro/Max variants with macOS 12.x, so let's
remove these formats from caps when such scenario is detected.
This issue appears to have been fixed OS-side in macOS 13.0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3912>
This crept in several years ago sadly :(
The usage of accurate seeking should be reserved to use-cases where it is
essential that we seek to that position. This should not be the default.
There is a new option `--acurate-seeks/-a` to be able to force that.
Furthermore, if accurate seeks aren't required, a player should be using the
GST_SEEK_FLAG_KEY_UNIT flag to seek to the closest keyframe and provide the most
reactive experience.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3926>
This was causing incorrect output when seeking, especially
when used with a multithreaded source like `videotestsrc n-threads=2`.
It should now correctly wait for frames still being processed by VT
while vtdec is flushing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3922>
We are using std::isspace() with one parameter. That function is defined
in the cctype header.
```
win32ipcutils.cpp(34): error C2672: 'std::isspace': no matching overloaded function found
win32ipcutils.cpp(34): error C2780: 'bool std::isspace(_Elem,const std::locale &)': expects 2 arguments - 1 provided
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3933>
When the task already exists, we forgot to free the passed `user_data`.
This wasn't an issue for most C code, which doesn't pass a
`GDestroyNotify`, but bindings such as gstreamer-rs do!
That said, allocating a trampoline in gstreamer-rs just for it to get
thrown away again is awkward. Maybe we need a `gst_pad_resume_task`?
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3920>
The av1C box is optional so dropping parsing does not break anything
fundamentally, and there seems to be no historical record how version 0
even looks like while the comments and the parsing disagreed with each
other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3882>
Since b76d336549
pads are deactivated when going to READY but in `uridecodebin(3)`, the
sources source pads are activated while in NULL state (when PULL mode is
supported), meaning that we are ending up deactivating those pads in
NULL_TO_READY, breaking the pipeline.
The intent of the commit mentioned above is to ensure that the pads are
deactivated either in PAUSED_TO_READY or READY_TO_READY, so it should
be safe to avoid deactivating in NULL_TO_READY.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3849>
Generating the source element is done when uridecodebin is doing the
READY to PAUSED state change, so it is reasonable to set the new source
element to that state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3857>
Do not store cached EGL images in GstMemory QData. Instead, use a
per-DmabufUpload GHashTable to store cache entries with a weak
reference to the GstMemory.
This allows two glupload elements on separate tee branches to have
their own EGL image cache. For this pipeline:
gst-launch-1.0 v4l2src ! tee name=t \
t. ! queue ! glupload ! fakesink
t. ! queue ! glupload ! fakesink
this gets rid of the occasional critical error message:
GStreamer-CRITICAL **: 08:26:33.194: gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3880>
When using qtdemux in a pipeline that should only work as a pure demuxer (not
for actual playback), qtdemux shouldn't emit new GstSegments to correct
the start time (jump to the future) to ensure that the user experiences no
playback delay. By doing so, it's generating the wrong segments when an append
of data from the past happens. When that happens, downstream elements such as
parsers (eg: aacparse) may clip those buffers laying before the GstSegment and
create problems on the GStreamer client app (eg: WebKit).
Getting buffers clipped out because of the wrong GstSegments started becoming
a problen when this commit was introduced:
ab6e49e9cc audioparsers: add back segment clipping to parsers that have lost it
This clipping makes test DASH shaka 35 from MVT tests[1] to fail in
WebKitGTK/WPE (at least) and can potentially cause a number of other problems
in the WebKit Media Source Extensions (MSE) code.
Note that this new behaviour of not emitting new GstSegments only makes sense
when qtdemux is being used as a pure demuxer and not as part of a regular
pipeline. This is why the variant field has been added. When equal to
VARIANT_MSE_BYTESTREAM, it will make qtdemux behave differently in push mode,
taking decisions that meet the expectations for an MSE-like processing mode.
This kind of tweaks have been done in the past for MSS streams, for instance.
That code has been refactored to use VARIANT_MSS_FRAGMENTED now, instead of
its own dedicated boolean flag.
Co-authored by: Alicia Boya García <ntrrgc@gmail.com>
...who suggested to use "variant: mse-bytestream" in the caps to identify that
mode, as proposed in her unmerged patch:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/467
[1] https://github.com/rdkcentral/mvt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3867>
The live playlists should be updated at a defined interval. The problem is that
this interval was used *after* the playlist was finally received and processed,
which resulted in a gradual shift happening in playlist updates.
Instead store and use the time at which playlists were requested to determine
when the next one should be downloaded.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
The scanning is done in a reverse order, the proper full checks to do are
therefore:
* If the position is beyond half a "segment duration", it's in the following
segment
* If the position is within the first half of a segment, it's in that one
* If the segment is the first one and the position is within half a duration
backwards, we consider the position as being within that first segment
Also handle the case where a "partial only" segment doesn't have a reliable
duration, and therefore use the playlist target duration instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
The implementation wouldn't work with regular HLS streams (i.e. the final
fallback).
Now that the implementation uses time to search for the starting
segment (instead of just the n-th from the end), we can specify the correct
hold_back fallback value from the RFC
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Avoid a deadlock if a downstream seeking query happens while the scheduler
thread is holding the manifest lock (for example during a seek back to live).
Instead, do a more elaborate fix where the external calls that need access to a
'manifest' access a copy that's updated during a manually triggered manifest
update callback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Rename track_dequeue_data_locked() to
gst_adaptive_demux_track_dequeue_data_locked(), since it's non-static.
Make find_stream_for_track_locked() static since it's only used in the main
gstadaptivedemux.c file.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
gst_adaptive_demux2_stream_finish_download() will already schedule another
fragment download if it can so don't fall through to the retry code that will
also try and schedule a download (triggering an assert).
Fix the logic in general to retry advancing into the live seek range once.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When calculating the seek range for a live stream, use the same hold-back logic
as when choosing a starting segment, including low-latency segments if
enabled. Permits seeking closer to the live edge when re-synching or catching
up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When playing at the live edge of a live playlist, and a download fails, we don't
expect there to be a next fragment. That case is handled lower down anyway, so
don't retry infinitely on spurious http errors at the live edge.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
gst_hls_demux_stream_has_next_fragment() can be called with a NULL
current_segment if we're past the end of the current playlist. In that case,
just return FALSE instead of hitting a critical in the playlist code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When playing LL-HLS playlists in LL-HLS mode, update the playlist more often (on
the partial segment interval) or else we end up downloading them in bursts and
playing further from the live edge than intended.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When playing a live stream, make the recommended buffering threshold at most the
hold-back distance from live. If we start 3 seconds from the live edge, there's
no point trying to buffer more - we'll just hit the live edge and have to wait
for more data to be available anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add a field to the DownloadRequest that reports the most recent time at which
data arrived. Update it in the DownloadHelper.
Add a method to retrieve the GST_BUFFER_OFFSET() for the DownloadRequest's data
buffer (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
After cancelling a DownloadRequest, the download helper may not do so
immediately, so we can't assert on the in_use flag. Also, since there's no
refcount on the preload hint struct in the download request callback data, make
sure no callbacks will be dispatched when we're going to free the preload hint
struct.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Implement fulfilment of HTTP requests from the active preload downloads by
finding any preload request that can provide the requested data and feeding
bytes from the internal DownloadRequest to the caller provided target
DownloadRequest.
Doesn't yet calculate timestamps to make the target request have a sensible
apparent bitrate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add download_request_take_buffer_range() and
download_request_get_bytes_available() methods.
download_request_take_buffer_range() takes bytes from the front of the request
that satisfy the requested start/end byterange, and puts any remaining bytes
back into the DownloadRequest
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add a helper that submits and handles blocking preload requests for future
PART/MAP data from live playlists. Add handling in the hlsdemux stream to submit
preload requests when hitting the end of the available segments in a live
playlist.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add a flag to hlsdemux to enable or disable LL-HLS handling.
When LL-HLS is enabled and an LL-HLS playlist is loaded, use the part-hold-back
threshold to choose a starting segment.
For live streams that aren't LL-HLS, use the provided hold-back attribute, or
fall back to landing 3 segments from the end.
Make the gst_hls_media_playlist_seek() method able to choose a partial segment
within 2 target durations of the end of the playlist when requested.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Fix an off-by-one in gst_hls_media_playlist_sync_to_playlist() that would ignore
the first fragment in the reference playlist. The error was harmless, since we
expect the reference playlist to be older than the playlist we're
synchronising (so the first/oldest segment in the reference playlist will likely
not exist in the new playlist), so this is just for correctness.
Also fix a segment leak in gst_hls_media_playlist_advance_fragment() when
ignoring the partial_only segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add a function for synchronising current position with the contents of a
playlist that is specifically for that and can handle synchronising to a partial
segment.
gst_hls_media_playlist_seek() will be used only when performing external seek
requests, to find the best segment or partial segment at which to resume
playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Fixes for stream_time recalculation and handling in partial segments.
Disallow bitrate switching when in the middle of partial segments - only at a
full segment (or right before the first partial segment of a segment).
It's possible but more difficult to switch bitrates in the middle of a partial
segment group, since they are less likely to have aligned keyframes. In any
case, the seek code can't do that right now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
This will be used for CUDA stream sharing.
* Adding GstCudaPoolAllocator object. The pool allocator will
control synchronization of allocated memory objects.
* Modify gst_cuda_allocator_alloc() API so that caller can specify/set
GstCudaStream object for the newly allocated memory.
* GST_CUDA_MEMORY_TRANSFER_NEED_SYNC flag is added in addition to
existing GST_CUDA_MEMORY_TRANSFER_NEED_{UPLOAD,DOWNLOAD}.
The flag indicates that any GPU command queued in the CUDA stream
may not be finished yet, and caller should take care of the
synchronization.
The flag is controlled by GstCudaMemory object if the memory holds
GstCudaStream. (Otherwise, GstCudaMemory will do synchronization
as before this commit). Specifically, GstCudaMemory object will set
the new flag automatically when memory is mapped with
(GST_MAP_CUDA | GST_MAP_WRITE) flags. Caller will need to unset
the flag via GST_MEMORY_FLAG_UNSET() if it's already synchronized
by client code.
* gst_cuda_memory_sync() helper function is added to perform synchronization
* Why not use CUevent object to keep track of synchronization status?
CUDA provides fence-like interface already via CUevent object,
but cuEventRecord/cuEventQuery APIs are not zero-cost operations.
Instead, in this version, the status is tracked by using map and
object flags.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3629>
Usually gst-plugin-scanner.exe will be located under libexec/gstreamer-1.0
or even somewhere user specified location via GST_PLUGIN_SCANNER
environment. So, in order for child process to be able to load
GStreamer DLLs, parent process will need to update PATH env
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3886>
And also keep the default encoder settings but simply override them with
our own values that we care about.
This mirrors the encoder configuration behaviour from ffmpeg.
Add AVTP Raw Video Format de-payload support. The element supports only
GRAY16_LE output format, so:
- active pixels (no vertical blanking),
- progressive mode,
- 8 and 16-bit pixel depth,
- mono pixel format,
- grayscale colorspace.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1335>
Add AVTP Raw Video Format payload support. The element supports only GRAY16_LE
input format, so:
- active pixels (no vertical blanking),
- progressive mode,
- 8 and 16-bit pixel depth,
- mono pixel format,
- grayscale colorspace.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1335>
Due to a bug in the VT API, attempting to encode interlaced content
with ProRes results in an error, halting the pipeline instead of
gracefully falling back to software encoding.
Should be removed in the future if Apple ever fixes this issue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3222>
The VA API has not defined the scaling list entries for U/V planes
for the 4:4:4 stream. In fact, we do not meet the 4:4:4 format output
for H264 so far, and scaling list is not used frequently, so we just
print out some warning and ignore these scaling list values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3749>
We already have functions to generate a stream-id from pads but in the
end those pads are not even used in most cases. This adds functions to
generate a stream-id even before creating the source pads for the
element that is going to use it. For example a demuxer that is properly
implements the GstStream/GstStreamCollection API will not have a Pad but
already needs to generate a stream-id.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3160>
The gst-devtools project generates gstreamer-validate-1.0.pc, this
must match the dependency in gst-editing-services for detection
to work properly.
Fixes:
Run-time dependency gst-validate-1.0 found: NO (tried pkgconfig and cmake)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3859>
All the RTP src pads were sharing the same stream-id while each actually
carry a different stream.
This was causing problem for example when funneling the streams together
and then trying to split them using 'streamiddemux'.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3855>
In theory, `dispose()` functions should be idempotent and should be
prepared not to crash or cause a double-free if an unref done from
inside caused a recursive call to `dispose()` of the same object.
https://developer.gnome.org/gobject/stable/howto-gobject-destruction.html
This patch modifies the `dispose()` method to honor these constraints.
Since the double `dispose()` call won't actually occur in qtdemux (there
is no cycle detection mechanism that could invoke it to work that way),
this is more of a code cleanup than a user-facing problem fix.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3822>
* Extend protocol so that client can notify of releasing shared memory
* Server will hold shared memory object until it's released by client
* Add allocator/buffer pool to reuse shared memory objects and buffers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3765>
With the addition of the 'keep-aspect-ratio' sizing policy, content
that doesn't fit the target size is downscaled according to its own
aspect ratio to fit that target size, and centered.
Centering might not always be the desired behaviour, however;
consumers of this API might want to align the resulting picture to
the left or to the right.
To account for any of these cases, add two new properties to the
glvideomixer pad: xalign, and yalign. They operate on normalized
coordinates (0.0 for start, 1.0 for end), and default to 0.5 which
centers content.
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
If we know there's only one stream we care about and we
don't have to synchronise audio and video, or send RRs,
we might just as well not hook up all the RTCP bits and
use fewer threads and sockets and simplify the pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3531>
Spec 7.1.3:
If a memory object does not have the VK_MEMORY_PROPERTY_HOST_COHERENT_BIT
property, then vkFlushMappedMemoryRanges must be called in order to guarantee
that writes to the memory object from the host are made available to the host
domain, where they can be further made available to the device domain via a
domain operation. Similarly, vkInvalidateMappedMemoryRanges must be called to
guarantee that writes which are available to the host domain are made visible to
host operations.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3723>
There is no byte-stream/au format for AV1 but only for H264, and the
encoder actually outputs obu-stream/tu instead of the annexb
stream-format that is similar to H264 byte-stream format.
Without this the encoder can't be used with elements that require a
specific AV1 stream-format, e.g. the MP4 or Matroska/WebM muxer.
The sizing policy allows selecting between the current behavior,
which deforms the texture to fill the width and height of the
pad; and a new 'keep-aspect-ratio' sizing policy, which fits the
texture within the rectangle respecting its original aspect ratio.
The reason for this is that this allows avoiding extra elements
in the pipeline, and reduces the number of buffer passing through
the pipeline.
Most of this code is a direct port of the sizing policy handling
of the compositor element, except it is adapted to operate on GL
texture coordinates through the projection matrix.
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
It's not possible to annotate a in-parameter for a return value array as
the array length. Both are assumed to have the same direction and the
current annotation causes the size parameter to be considered an out
parameter.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3787>
Without this, the plugin cannot be loaded in a devenv because the
RPATH is not added to the plugin dylib. This RPATH will be stripped on
install, which is what we want.
When deploying apps, people are supposed to use `macdeployqt` to
create an AppBundle that bundles Qt for you and sets the RPATHs
correctly to point to that bundled Qt.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3708>
It is really difficult for people to figure out why nvcodec has
0 features. Even the debug log is cryptic. Also make sure the errors
go to the ERROR log level, which is more likely to be enabled by
default.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3776>
If we have caps then we can only set exactly those caps, if we have no
caps yet then negotiating anything is not very meaningful because the
caps are defined by the application and not downstream.
Avoids, among other things, an unnecessary allocation query and spurious
useless caps being set before the first buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3757>
_alloca CRT function is deprecated. Moreover, stack allocation
for string is not a good idea. We can use _malloca inline
function instead, but all use of _alloca in d3d11 library/plugin
are not performance critical path at all.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3652>
Due to the dynamic nature of multiqueue, when `use-interleave` is used we can't
report a maximum tolerated latency (when queried) since it is calculated
dynamically.
When in such live pipelines, we need to make sure multiqueue can handle the
lowest global latency (provided by this event). Failure to do that would
result in not providing enough buffering for a realtime pipeline.
Fixes#1732
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3772>
Pads are activated automatically when they are added if the element
state is >=PAUSED, so it's not necessary to activate them manually
anymore.
This patch removes manual pad activation from gstaggregator, gstconcat,
gstfunnel, and gstinputselector.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3636>
Deserialize socket control messages as GstSocketTimestampMessage only
if (level, type) is (SOL_SOCKET, SCM_TIMESTAMPNS).
Without this patch, messages with types SCM_RIGHTS or SCM_CREDENTIALS
could be deserialized as GstSocketTimestampMessage instead of
GUnixFDMessage or GUnixCredentialsMessage from gio.
Fixes#1736
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3777>
Handling mouse navigation events in glvideomixer element, if no
pixel-aspect-ratio info in the caps, an assertion error is produced
inside gst_util_fraction_multiply because default denominator is zero.
Error fixed:
```
(gst-launch-1.0:102654): GStreamer-CRITICAL **: 00:47:51.598: gst_util_fraction_multiply: assertion 'b_d != 0' failed
```
Simple pipeline to reproduce the issue:
```
gst-launch-1.0 -v glvideomixer name=mix ! glimagesinkelement gltestsrc ! mix.sink_0
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3766>
Allow requesting an offer from the peer if we're joining a call with a
peer, and allow the peer to request an offer from us if waiting for an
incoming call.
This implements all 4 variants the protocol allows for.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3758>
AVC-Intra is a range of H.264-compliant intra-only codecs from
Panasonic. The codes and descriptions have been taken from VLC.
The (encumbered) sample I have here produces byte-stream H.264,
including SPS and PPS and no `avcC` box.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3739>
We create a new context in `gst_gl_context_create_thread()` and then
activate it on the current thread. Thereafter we assume that the
current thread continues to be the active thread for that context and
call `gst_gl_context_fill_info()` which asserts that the current
thread is the active thread.
However, if at the same time a different thread calls
`send_message_async()`, it will call into
`gst_gl_window_cocoa_send_message_async()` which will schedule the
message to be invoked using GCD. That anonymous function will also
call `gst_gl_context_activate()`, which creates a race, which can lead
to:
```
gst_gl_context_fill_info: assertion 'context->priv->active_thread == g_thread_self ()' failed
```
Fix it by using `gst_gl_context_thread_add()` to invoke `fill_info()`
on the context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3732>
This allows handling input buffers with non-default strides, which was
already handled fine by the element code.
Without this, potentially expensive conversion was needed.
The private data is not copied over for SVT AV1 encoder so this code
path would've never worked.
Instead of relying on the PTS, which is not required to be unique or
existing at all, we always take the oldest frame as AV1 has no frame
reordering / B frames.
The goal of the "global" group-id is to fix new inputs that do not come from the
same "source" as others. In order to ensure all "current" streams have the same
group-id we distribute the first valid group-id to all streams.
This commit fixes two issues with that:
* When inputs are unlinked they weren't always properly resetted (it would only
work if parsebin is used, which is no longer the default in
uridecodebin3/playbin3).
* When computing the global group-id, take into account unset
group-id (i.e. GST_GROUP_ID_INVALID).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1698
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3712>
No matter if they're allocated via GSlice or malloc(). The allocator is
completely irrelevant, all local tags need to be in the primer so they
can be handled.
This didn't have any effect in practice because all local tags that
appear in the muxer are allocated via GSlice. Only from the demuxer they
might be allocated via malloc().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3699>
