The AV1 codec needs to support the film grain feature. When the film
grain feature is enabled, we need two surfaces as the output of the
decoded picture, one without film grain effect and the other one with
it. The first one acts as the reference and is needed for later pictures'
reconstruction, and the second one is the real display output.
So we need to attach another aux surface to the gst buffer/mem and make
that aux surface as the target of vaBeginPicture.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1636>
AS-IS:
D3D11Convert class is baseclass of D3D11ColorConvert and D3D11Scale
* GstD3D11Convert
|_ GstD3D11ColorConvert
|_ GstD3D11Scale
TO-BE:
Introducing a new base class for color conversion and/or rescale elements
* GstD3D11BaseConvert
|_ GstD3D11Convert
|_ GstD3D11ColorConvert
|_ GstD3D11Scale
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2029>
In 6ae24948 the pipeline buffer destroy were removing assuming it
wasn't required. Nonetheless, debugging the code it looks like a
buffer leak in iHD driver since the ID of the buffer kept increasing.
The difference now is that first the filter buffers are destroy first
and later the pipeline buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2023>
Just like the decoder, the vapostproc also needs to copy the output
buffer to raw buffer if downstream elements only supports raw caps
and does not support the video meta.
The pipeline like:
gst-launch-1.0 filesrc location=xxxx ! h264parse ! vah264dec ! \
vapostproc ! capsfilter caps=video/x-raw,width=55,height=128 ! \
filesink location=xxx
needs this logic to dump the data correctly.
fixes: #1523
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2026>
Both wasapi2 and wasapi plugins use WASAPI API. So "device.api=wasapi"
would make sense for the wasapi2 plugin as well. But people would be
confused by the identical "device.api=wasapi" property if intended
plugin is wasapi, not wasapi2. This change will make them distinguishable
by using "device.api" device property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2024>
One problem that va dmabuf allocator had is when preparing a buffer from
dmabuf memories in the allocator pool, specially when a buffer is composed by
several memories. This memories have to be by certain number and in certain
order.
This patch stores the number of memories and their address in order when a
dmabuf-based buffer is created and when preparing a buffer, it is reconstructed
with this info.
Finally, instead of pushing the memories as soon as they are unrefed, they are
hold until GstVaBufferSurface's ref_mems_count reaches zero (all the memories
related with that buffer/surface are unrefed). Until that happen, all the
memories are pushed back into the queue, locked, assuring that all the memories
related with a single buffer (with the same surface) remain contiguous, so the
buffer reconstruction is assured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2013>
Instead of removing memories from buffers at reset_buffer()/release_buffer() the
bufferpool operation is kept as originally designed, still the allocator pool is
used too. Thus, this patch restores the buffer size configuration while removing
release_buffer(), reset_buffer() and acquire_buffer() vmethods overloads.
Then, when the bufferpool base class decides to discard a buffer, the VA
surface-based memory is returned to the allocator pool when its last reference
is freed, and later reused if a new buffer is allocated again.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2013>
Add a new element d3d11deinterlace to support deinterlacing.
Similar to d3d11videosink and d3d11compositor, this element is
a wrapper bin of set of child elements including helpful
conversion elements (upload/download and color convert)
to make this element configurable between non-d3d11 elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2016>
Since our decoder DPB texture pool cannot be grown once it's
configured, we should pre-allocate sufficient number of textures
for zero-copy playback (but not too many).
The "min buffers" allocation query parameter can be a hint for
the number of required textures in addition to DPB size.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2017>
There were two problems with frame copy:
1. The input video info are from the format color, not form the allocated VA
surface, it's needed to update the sink video info according with the
allocator's data.
2. The parameters of `gst_video_frame_copy()` were backwards.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2007>
transform_size() basetransform vmethod is used when there's no output buffer
pool and allocates a system memory buffer. With VA this cannot be allowed, since
it needs VASurfaces to process.
Thus transform_size() is not required, but to play safe let's return FALSE.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2007>
Unlike other stateless decoder implementations (e.g., VA),
our DPB pool cannot be grown since we are using
texture array (pre-allocated, fixed-size d3d11 texture pool).
So, if there's no more available texture to use,
there's no way other than copying it to downstream's
d3d11 buffer pool. Otherwise deadlock will happen.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/2003>
This adds a non-thread safe refcount to the GstV4l2Request. This will
allow holding on more then one request in order to implement render
delay. This is made non-thread safe for speed as we know this will all
happen on the same streaming thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1881>
Starting from this patch, all queue and dequeue operation happening
on V4L2 is now abstracted with the request. Buffers are dequeued
automatically when pending requests are marked done and only 1 in-flight
request is now used.
Along with fixing issues with request not being reused with slice
decoders, this change reduces the memory footprint by allocating only
two bitstream buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1881>
* Don't warn for live object, since ID3D11Debug itself seems to be
holding refcount of ID3D11Device at the moment we called
ID3D11Debug::ReportLiveDeviceObjects(). It would report live object
always
* Device might not be able to support some formats (e.g., P010)
especially in case of WARP device. We don't need to warn about that.
* gst_d3d11_device_new() can be used for device enumeration. Don't warn
even if we cannot create D3D11 device with given adapter index therefore.
* Don't warn for HLSL compiler warning. It's just noise and
should not be critical thing at all
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1986>
Add a way to support drawing on application's texture instead of
usual window handle.
To make use of this new feature, application should follow below step.
1) Enable this feature by using "draw-on-shared-texture" property
2) Watch "begin-draw" signal
3) On "begin-draw" signal handler, application can request drawing
by using "draw" signal action. Note that "draw" signal action
should be happen before "begin-draw" signal handler is returned
NOTE 1) For texture sharing, creating a texture with
D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX flag is strongly recommend
if possible because we cannot ensure sync a texture
which was created with D3D11_RESOURCE_MISC_SHARED
and it would cause glitch with ID3D11VideoProcessor use case.
NOTE 2) Direct9Ex doesn't support texture sharing which was
created with D3D11_RESOURCE_MISC_SHARED_KEYEDMUTEX. In other words,
D3D11_RESOURCE_MISC_SHARED is the only option for Direct3D11/Direct9Ex interop.
NOTE 3) Because of missing synchronization around ID3D11VideoProcessor,
If shared texture was created with D3D11_RESOURCE_MISC_SHARED,
d3d11videosink might use fallback texture to convert DXVA texture
to normal Direct3D texture. Then converted texture will be
copied to user-provided shared texture.
* Why not use generic appsink approach?
In order for application to be able to store video data
which was produced by GStreamer in application's own texture,
there would be two possible approaches,
one is copying our texture into application's own texture,
and the other is drawing on application's own texture directly.
The former (appsink way) cannot be a zero-copy by nature.
In order to support zero-copy processing, we need to draw on
application's own texture directly.
For example, assume that application wants RGBA texture.
Then we can imagine following case.
"d3d11h264dec ! d3d11convert ! video/x-raw(memory:D3D11Memory),format=RGBA ! appsink"
^
|_ allocate new Direct3D texture for RGBA format
In above case, d3d11convert will allocate new texture(s) for RGBA format
and then application will copy again the our RGBA texutre into
application's own texture. One texture allocation plus per frame GPU copy will hanppen
in that case therefore.
Moreover, in order for application to be able to access
our texture, we need to allocate texture with additional flags for
application's Direct3D11 device to be able to read texture data.
That would be another implementation burden on our side
But with this MR, we can configure pipeline in this way
"d3d11h264dec ! d3d11videosink".
In that way, we can save at least one texture allocation and
per frame texutre copy since d3d11videosink will convert incoming texture
into application's texture format directly without copy.
* What if we expose texture without conversion and application does
conversion by itself?
As mentioned above, for application to be able to access our texture
from application's Direct3D11 device, we need to allocate texture
in a special form. But in some case, that might not be possible.
Also, if a texture belongs to decoder DPB, exposing such texture
to application is unsafe and usual Direct3D11 shader cannot handle
such texture. To convert format, ID3D11VideoProcessor API needs to
be used but that would be a implementation burden for application.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1873>
gstd3d11window_corewindow.cpp(408): warning C4189:
'storage': local variable is initialized but not referenced
gstd3d11window_corewindow.cpp(490): warning C4189:
'self': local variable is initialized but not referenced
gstd3d11window_swapchainpanel.cpp(481): warning C4189:
'self': local variable is initialized but not referenced
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1962>
Some GPUs (especially NVIDIA) are complaining that GPU is still busy
even we did 50 times of retry with 1ms sleep per failure.
Because DXVA/D3D11 doesn't provide API for "GPU-IS-READY-TO-DECODE"
like signal, there seems to be still no better solution other than sleep.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1913>
The vabasedec's display and decoder are created/destroyed between
the gst_va_base_dec_open/close pair. All the data and event handling
functions are between this pair and so the accessing to these pointers
are safe. But the query function can be called anytime. So we need to:
1. Make these pointers operation in open/close and query atomic.
2. Hold an extra ref during query function to avoid it destroyed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1957>
Initial support for d3d11 texture so that encoder can copy
upstream d3d11 texture into encoder's own texture pool without
downloading memory.
This implementation requires MFTEnum2() API for creating
MFT (Media Foundation Transform) object for specific GPU but
the API is Windows 10 desktop only. So UWP is not target
of this change.
See also https://docs.microsoft.com/en-us/windows/win32/api/mfapi/nf-mfapi-mftenum2
Note that, for MF plugin to be able to support old OS versions
without breakage, this commit will load MFTEnum2() symbol
by using g_module_open()
Summary of required system environment:
- Needs Windows 10 (probably at least RS 1 update)
- GPU should support ExtendedNV12SharedTextureSupported feature
- Desktop application only (UWP is not supported yet)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1903>
Move d3d11 device, memory, buffer pool and minimal method
to gst-libs so that other plugins can access d3d11 resource.
Since Direct3D is primary graphics API on Windows, we need
this infrastructure for various plugins can share GPU resource
without downloading GPU memory.
Note that this implementation is public only for -bad scope
for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/464>
Add the helper function _get_surface_id() which extracts the
VASurfaceID from the passed picture. This function gets the surface of
the next and previous reference picture.
Instead of if-statements, this refactor uses a switch-statement with a
fall-through, for P-type pictures, making the code a bit more readable.
Also it adds quirks for gallium driver, which cannot handle invalid
surfaces as forwarding nor backwarding references, so the function fails.
Also iHD cannot handle them, but to avoid failing, the current picture
is used as self-reference.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1939>
When missing the reference frames, we should not just discard the current
frame. Some streams have group of picture header. It is an optional header
that can be used immediately before a coded I-frame to indicate to the decoder
if the first consecutive B-pictures immediately following the coded I-frame can
be reconstructed properly in the case of a random access.
In that case, the B frames may miss the previous reference and can still be
correctly decoded. We also notice that the second field of the I frame may
be set to P type, and it only ref its first field.
We should not skip all those frames, and even the frame really misses the
reference frame, some manner such as inserting grey picture should be used
to handle these cases.
The driver crashes when it needs to access the reference picture while we set
forward_reference_picture or backward_reference_picture to VA_INVALID_ID. We
now set it to current picture to avoid this. This is just a temp manner.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1929>
The behavior for zero AVEncMPVGOPSize value would be
varying depending on GPU vendor implementation and some
GPU will produce keyframe only once at the beginning of encoding.
That's unlikely expected result for users.
To make this property behave consistently among various GPUs,
this commit will change default value of "gop-size" property to -1
which means "auto". When "gop-size" is unspecified, then
mfvideoenc will calculate GOP size based on framerate
like that of our x264enc implementation.
See also
https://docs.microsoft.com/en-us/windows/win32/directshow/avencmpvgopsize-property
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1911>
Add a new video source element "d3d11desktopdupsrc" for capturing desktop image
via Desktop Duplication based on Microsoft's Desktop Duplication sample available at
https://github.com/microsoft/Windows-classic-samples/tree/master/Samples/DXGIDesktopDuplication
This element is expected to be a replacement of existing dxgiscreencapsrc
element in winscreencap plugin.
Currently this element can support (but dxgiscreencapsrc cannot)
- Copying captured D3D11 texture to output buffer without download
- Support desktop session transition
e.g., can capture desktop without error even in case that
"Lock desktop" and "Permission dialog"
- Multiple d3d11desktopdupsrc elements can capture the same monitor
Not yet implemented features
- Cropping rect is not implemented, but that can be handled by downstream
- Mult-monitor is not supported. But that is also can be implemented by
downstream element for example via multiple d3d11desktopdup elements
with d3d11compositor
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1855>
Hide most of symbols of GstD3D11Memory object.
GstD3D11Memory is one of primary resource for imcoming d3d11 library
and it's expected to be a extensible feature.
Hiding implementation detail would be helpful for later use case.
Summary of this commit:
* Now all native Direct3D11 resources are private of GstD3D11Memory.
To access native resources, getter methods need to be used
or generic map (e.g., gst_memory_map) API should be called
apart from some exceptional case such as d3d11decoder case.
* Various helper methods are added for GstBuffer related operations
and in order to remove duplicated code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1892>
... instead of READY state. READY state is too early for setting
overlay window handle especially playbin/playsink scenario
since playsink will set given overlay handle on videosink once
READY state change of videosink is ensured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1893>
Unlike software MFT (Media Foundation Transform) which is synchronous
in terms of processing input and output data, hardware MFT works
in asynchronous mode. output data might not be available right after
we pushed one input data into MFT.
Note that async MFT will fire two events, one is "METransformNeedInput"
which happens when MFT can accept more input data,
and the other is "METransformHaveOutput", that's for signaling
there's pending data which can be outputted immediately.
To listen the events, we can wait synchronously via
IMFMediaEventGenerator::GetEvent() or make use of IMFAsyncCallback
object which is asynchronous way and the event will be notified
from Media Foundation's internal worker queue thread.
To handle such asynchronous operation, previous working flow was
as follows (IMFMediaEventGenerator::GetEvent() was used for now)
- Check if there is pending output data and push the data toward downstream.
- Pulling events (from streaming thread) until there's at least
one pending "METransformNeedInput" event
- Then, push one data into MFT from streaming thread
- Check if there is pending "METransformHaveOutput" again.
If there is, push new output data to downstream
(unlikely there is pending output data at this moment)
Above flow was processed from upstream streaming thread. That means
even if there's available output data, it could be outputted later
when the next buffer is pushed from upstream streaming thread.
It would introduce at least one frame latency in case of live stream.
To reduce such latency, this commit modifies the flow to be fully
asynchronous like hardware MFT was designed and to be able to
output encoded data whenever it's available. More specifically,
IMFAsyncCallback object will be used for handling
"METransformNeedInput" and "METransformHaveOutput" events from
Media Foundation's internal thread, and new output data will be
also outputted from the Media Foundation's thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1520>
Add a new property "render-stats" to allow rendering statistics
data on window for debugging and/or development purpose.
Text rendering will be accelerated by GPU since this implementation
uses Direct2D/DirectWrite API and Direct3D inter-op for minimal overhead.
Specifically, text data will be rendered on swapchain backbuffer
directly without any copy/allocation of extra texture.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1830>
Since GstVaDecodePicture is destroyed completely with its free() function and
it's used as destroy notify by codecs picture, there's no need to call
gst_va_decoder_destroy_buffers() externally, since the codecs base classes
destroy the codec picture when it's required.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1841>
The current way of GstVaDecodePicture's finalize will leak some
resource such as parameter buffers and slice data.
The current way deliberately leaves these resource releasing logic
to va decoder related function and trigger a warning if we free the
GstVaDecodePicture without releasing these resources.
But in practice, sometimes, you do not have the chance to release
these resource before picture is freed. For example, H264/Mpeg2
support multi slice NALs/Packets for one frame. It is possible that
we already succeed to parse and generate the first several slices
data by _decode_slice(), but then we get a wrong slice NAL/packet
and fail to parse it. We decide to discard the whole frame in the
decoder's base class, it just free the current picture and does not
trigger sub class's function again. In this kind of cases, we do
not have the chance to cleanup the resource, and the resource will
be leaked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1841>
Even if resolution and/or bitdepth is not updated, required
DPB size can be changed per SPS update and it could be even
larger than previously configured size of DPB. If so, we need
to reconfigure DPB d3d11 texture pool again.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1839>
In order to honor GST_BUFFER_POOL_ACQUIRE_FLAG_DONTWAIT in VA pool, allocators'
wait_for_memory() has to be decoupled from their prepare_buffer() so it could be
called in pools' acquire_buffer() if the flag is not set.
wait_for_memory() functions are blocking so the received memories are assigned
to the fist requested buffer, if multithreaded calls. For this a new mutex were
added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1815>
An application, using for example appsink, can hold buffers from any
va allocator after setting the pipeline to NULL. We need to destroy
the allocator when that memory is unrefed.
This patch juggles a bit with the allocator reference count in
memories in order to achieve this:
1. When memory is created no alloc ref is modified
2. When memory is released, alloc ref is decreased
3. When memory is reassiged to a buffer, alloc ref is increased
4. When memory is flushed, alloc ref is increased becase it is going
to be decreased in gst_memory_unref()
Also this patch moves the deallocation of member variables to
finalize() rather than dispose()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1815>
In case that "pic_order_cnt_type" is equal to zero, ref picture
list for B slice should not include non-existing picture
as per spec 8.2.4.2.3. And, the second field is not needed
for the process of frame picture reference list construction
since it needs to be frame unit, not field picture in that case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1812>
force_videometa should mean that the buffer must use video meta to
map correctly. When the stride or the offset of the alloc_info is
different from the src caps, the downstream must use video meta.
So this flag should not link with the RAW caps only. All kinds of
caps(memory:VAMemory, memory:DMABuf) should have this flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1711>
When the downstream element reports an ANY caps, and it also fails to
support VideoMeta, we should fallback to the system memory.
Note: the basetransform kind elements never return valid allocation
query before set_caps(). So, if a basetransform return an ANY sink
caps, we always fallback to system memory for it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1711>
Allocate a GArray which is used to fill
VAPictureParameterBufferH264.ReferenceFrames (called per frame),
instead of alloc/free per frame.
Also this commit is to fix the condition where long-term reference
picture is needed for VAPictureParameterBufferH264.ReferenceFrames
entry.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1813>
We don't need to preserve input color range for transformed target
color space. Also some GPUs doesn't seem to be happy with 16-235
color range for RGB color space.
Also, since our default display target color space is
DXGI_COLOR_SPACE_RGB_FULL_G22_NONE_P709, choosing full color range
would make more sense.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1814>
When gst_va_dmabuf_allocator_setup_buffer_full() receives info (not NULL) it is
supposed that this buffer is not part of the allocator pool, so it has to be
de-allocated as soon it is freed.
This patch sets the destroy notify of the assigned GstVaBufferSurface if info is
not NULL.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1811>
Managing reference picture type by using two variables
(ref and long_term) seems to be redundant and that can be
represented by using a single enum value.
This is to sync this implementation with gstreamer-vaapi so that
make comparison between this and gstreamer-vaapi easier and also
in order to minimize the change required for subclass to be able
to support interlaced.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1534>
As per spec 7.4.3 Slice header semantics, the flag value is derived as
MbaffFrameFlag = (mb_adaptive_frame_field_flag && !field_pic_flag)
and DXVA uses the value.
Regarding FrameNumList, in case of long-term ref, FrameNumList[i]
value should be long_term_frame_idx not long_term_pic_num.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1780>
This add HEVC decoding support into the new VA plugin. This implementation has
been tested using the ITU comformance test (through fluster). It fails all
MAIN10 tests, as this is not implemented yet along with the following:
CONFWIN_A_Sony_1 (looks fine, but md5sum is incorrect)
PICSIZE_A_Bossen_1 (height too high)
PICSIZE_B_Bossen_1 (same)
VPSSPSPPS_A_MainConcept_1 (parser issue)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1714>
This causes no changes to the profile but keeps the existing settings.
The profile can also be changed from e.g. the card's configuration
application and in that case probably should be left alone.
The default is the new value as it keeps the profile setting as it is,
which is consistent with the previous behaviour in 1.18.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1721>
In our va implemenation, we just use image's info to map the buffer.
The padding info just plays a role as a place holder to expand the
allocation size in caps when decoding size is bigger than display
size. So the padding_right or padding_left does not change the result.
But we find if using padding_left, it is hard to meet the requirement
of gst_video_meta_validate_alignment(), when the video meta's stride
is different from the allocation width.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1698>
We have already done the jobs in gst_va_base_dec_decide_allocation()
and no need to call base class' decide_allocation() again. The base
class' decide_allocation() will set_format() again and let use do the
image/surface testing again, which is low performance and no needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1698>
Use this standalone function to update the allocator info and make
all ensure_image() and mem_alloc() API clean.
We also change the default way of using image. We now set the non
derive manner as the default manner, and if it fails, then fallback
to the derived image manner.
On a lot of platforms, the derived image does not have caches, so the
read and write operations have very low performance.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1698>
Moving the parameters testing and setting from the allocator_alloc_full()
to the allocator_try(). The allocator_alloc_full() will be called every
time when we need to allocate a new memory. But all these parameters such
as the surface and the image format, rt_format, etc, are unchanged during
the whole allocator lifetime. Just setting them in set_format() is enough.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1698>
Output texture of d3d11 decoder cannot have the bind flag
D3D11_BIND_SHADER_RESOURCE (meaning that it cannot be used for shader
input resource). So d3d11convert (and it's subclasses) was copying
texture into another internal texture to use d3d11 shader.
It's obviously overhead and we can avoid texture copy for
colorspace conversion or resizing via ID3D11VideoProcessor
as it supports decoder output texture.
This commit would be a visible optimization for d3d11 decoder with
d3d11compositor use case because we can avoid texture copy per frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1718>
GstMemory object could be disposed if GstBuffer is not allocated
by GstD3D11BufferPool such as via gst_buffer_copy() and/or
gst_buffer_make_writable(). So attaching qdata on GstMemory
object would cause unnecessary view alloc/free.
By using view pool which is implemented in GstD3D11Allocator,
we can avoid redundant view alloc/free.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1716>
In order to know the chroma format, besides profile, subsampling_x and
subsampling_y are needed (Spec 7.2.2 Color config semantics). These values are
in GstVp9Parser but not in GstVp9Framehdr.
Also, bit_depth is available in parser but not frame header. Evenmore, those
values are copied to picture structure later.
In case of VA-API, to configure the pipeline, it is require to know the chroma
format and depth.
It is possible to know chroma and depth through caps coming from vp9parser, but
it requires string parsing. It would be less error prone to get these values
through the parser structure at new_sequence() virtual method.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1700>
Add new video composition element which is equivalent to compositor
and glvideomixer elements. When d3d11 decoder elements are used,
d3d11compositor can do efficient graphics memory handling
(zero copying or at least copying memory on GPU memory space).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1323>
New d3d11colorconvert and d3d11scale elements will perform only
colorspace conversion and rescale, respectively. Those new elements
would be useful when only colorspace conversion or rescale is required
and the other part should be done by another elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1323>
Add util functions for runtime CUDA kernel source compilation
using NVRTC library. Like other nvcodec dependent libraries,
NVRTC library will be loaded via g_module_open.
Note that the NVRTC library naming is not g_module_open friendly
on Windows.
(i.e., nvrtc64_{CUDA major version}{CUDA minor version}.dll).
So users can specify the dll name using GST_NVCODEC_NVRTC_LIBNAME
environment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1633>
Introducing CUDA buffer pool with generic CUDA memory support.
Likewise GL memory, any elements which are able to access CUDA device
memory directly can map this CUDA memory without upload/download
overhead via the "GST_MAP_CUDA" map flag.
Also usual GstMemory map/unmap is also possible with internal staging memory.
For staging, CUDA Host allocated memory is used (see CuMemAllocHost API).
The memory is allowing system access but has lower overhead
during GPU upload/download than normal system memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1633>
Fix a bug in _create_other_pool(). The old way of checking the
base->other_pool make that other_pool never be changed until the
gst_va_base_dec_stop() to stop the current decoding context.
But in some stream, the resolution may change during the decoding
process, and we need to re-negotiate the buffer pool. Then, the
old other_pool can not be clean correctly and the new correct one
can not be created.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1692>
The current bufferpool wastes all pre-allocate buffers when the
buffer pool is actived.
The pool->priv->size is 0 for va buffer pool. And every time, the
reset_buffer() will clean all mem and make the buffer size 0, that
can cache the gst_buffer in the buffer pool.
But when the buffer pool is activing, the default_start() just
allocate the buffer and release_buffer() immediately, all the pre
allocated buffers and surfaces are destroyed because of
gst_buffer_get_size (buffer) != pool->priv->size.
We need to use release_buffer() to do the clean job at the pool
start time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1686>
Since allocators keep an available memory queue to reuse, video format and usage
hint are now persistant while allocator's memories are around.
This patch adds _set_format() and _get_format() for both VA allocators.
_set_format() validates if given format can be used or reused. If no allocated
surface previously it creates a dummy one to fetch its offsets and
strides. Updated info is returned to callee.
GstVaPool uses _set_format() at config to verify the allocator capacity and to
get the surfaces offsets and strides, which are going to be used by the video
meta.
Allocator extracted caps are compared with caps from config and if they have
different strides or offsets, force_videometa is set.
A new bufferpool method gst_va_pool_requires_video_meta() is added return the
value of force_videometa. This value is checked in order to know if decoders
need to copy the surface if downstream doesn't announce video meta support.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1667>
Without preallocating buffers and memories a deadlock in pool allocator is
highly probably since it might hit the case were buffer is returned to the pool
but their memories are still hold by a copy downstream, without other
preallocated buffers available.
This kind of a hack, where buffer_reset() follow the normal path if it's called
from start().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1667>
Every time a new surface is created the counter increases by one, and when it is
destroyed (or will be destroyed in case of GstVaAllocator), the counter is
decreased. Then, at allocator dispose, it is warning if the counter is not zero.
This counter will be also used to check if the allocator can change its
configuration if the counter is zero or can not.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1667>
Updated Decklink SDK to version 11.2 in order to support newer cards like the Decklink 8K Pro.
This required to replace the duplex property by a profile property.
Profile values can be the following:
- bmdProfileOneSubDeviceFullDuplex
- bmdProfileOneSubDeviceHalfDuplex
- bmdProfileTwoSubDevicesFullDuplex
- bmdProfileTwoSubDevicesHalfDuplex
- bmdProfileFourSubDevicesHalfDuplex
Fixes#987
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1665>
