The default implementation for packet loss handling previously
always sent a gap event.
While this is correct as long as we know the packet that was
lost was actually a media packet, with ULPFEC this becomes
a bit more complicated, as we do not know whether the packet
that was lost was a FEC packet, in which case it is better
to not actually send any gap events in the default implementation.
Some payloaders can be more clever about, for example VP8 can
use the picture-id, and the M and S bits to determine whether
the missing packet was inside an encoded frame or outside,
and thus whether if it was a media packet or a FEC packet,
which is why ulpfecdec still lets these lost events go through,
though stripping them of their seqnum, and appending a new
"might-have-been-fec" field to them.
This is all a bit terrible, but necessary to have ULPFEC
integrate properly with the rest of our RTP stack.
https://bugzilla.gnome.org/show_bug.cgi?id=794909
The newly-added build definitions for test/icles relied
on dependencies that were only defined when the examples
are enabled, thus breaking meson build -Ddisable_examples=true
As we load that symbol dynamically, valgrind gets confused
when it leaks and reports the leak against an unrelated library
and an unknown (??) symbol.
To address that, put the loading and calling of that symbol
in a separate function, and ignore any malloc leak happening
in that function.
test_negotiation would occasionally time out, for unknown reasons.
Simplify the test setup and get rid of the main loop, busses, and
notify signals. With this I can no longer easily reproduce the
timeout. Fingers crossed.
These are very much artificial of course, but got to
measure something. appsink one contains lots of buffer
creation/free overhead, while appsrc one does not.
We can either receive an element that is floating or not and need to
accomodate that in the signal return values. Do so by removing the
floating flag.
https://bugzilla.gnome.org/show_bug.cgi?id=792597
It does not timeout anymore, even though it's a very slow test. For the
context, this test runs routines for a fixes amount of time and prints
the throughput. Which means the test takes more time everytime a pixel
format is added. If that becomes a problem again, we should disable the
benchmarks by default.
Need to add gio-unix-2.0 dep to pipelines/tcp test otherwise it
won't find the gio/gunixfdmessage.h header which is not in the
same dir as the other gio headers. This issue was masked before
because we didn't include config.h so HAVE_GIO_UNIX_2_0
wasn't defined.
In many cases the unistd.h includes weren't actually needed.
Don't build tests that need it on windows with MSVC
(multifdsink, multisocketsink, pipelines/tcp).
Preparation for making tests work on Windows with MSVC.
Some GL platforms (EGL, WGL) require deactivating the OpenGL context in
one thread before it can be used in another thread which this test
currently violates and would e.g. result in EGL_BAD_ACCESS errors from
gst_gl_context_activate().
Fix by moving the object creation into the GL thread instead and not
requiring additional gst_gl_context_activate() calls.
https://bugzilla.gnome.org/show_bug.cgi?id=792158
If timestamp goes forwards more than allowed, we consider that the
timestamp belongs to the previous counting, so the extended timestamp
is unwrapped.
https://bugzilla.gnome.org/show_bug.cgi?id=783443
Tests and documentation will follow separately.
The mixer elements in the opengl plugin need to stay
in -bad for now since they use GstVideoAggregator.
https://bugzilla.gnome.org/show_bug.cgi?id=754094
The client-draw callback is running on the GL Thread, which will
be required to map the buffer. Map early, and pass the mapped
frame instead. On top of that, make sure to signal any pending
draw before trying to push EOS, as some pad locks might be taken.
This is the cost of using the same thread to control GStreamer and
to render GL.
Except for gst/gl/gstglfuncs.h
It is up to the client app to include these headers.
It is coherent with the fact that gstreamer-gl.pc does not
require any egl.pc/gles.pc. I.e. it is the responsability
of the app to search these headers within its build setup.
For example gstreamer-vaapi includes explicitly EGL/egl.h
and search for it in its configure.ac.
For example with this patch, if an app includes the headers
gst/gl/egl/gstglcontext_egl.h
gst/gl/egl/gstgldisplay_egl.h
gst/gl/egl/gstglmemoryegl.h
it will *no longer* automatically include EGL/egl.h and GLES2/gl2.h.
Which is good because the app might want to use the gstgl api only
without the need to bother about gl headers.
Also added a test: cd tests/check && make libs/gstglheaders.check
https://bugzilla.gnome.org/show_bug.cgi?id=784779
All code interacting with Objective-C objects should now use Automated
Reference Counting rather than manual memory management or Garbage
Collection. Because ARC prohibits C-structs from containing
references to Objective-C objects, all such fields are now typed
'gpointer'. Setting and gettings Objective-C fields on such a
struct now uses explicit __bridge_* calls to tell ARC about
object lifetimes.
https://bugzilla.gnome.org/show_bug.cgi?id=777847
Create our own instead as the default framebuffer may require special
fiddling (like having a visible window) to correctly display/be renderable.
Fixes the remaining GL library tests on OS X
gstgl doesn't undo/overwrite what GL state the examples are changing
anymore. As such, the examples need to reset the GL state themselves
to be able to play nice with libgstgl
The spec allows the core/compatibility profiles to be used
with #version 150.
Also tighten up the tests to check for default profiles being chosen
correctly.
The tests were broken since 91fea30, which changed glupload to return
GST_GL_UPLOAD_RECONFIGURE if the texture target in the input buffers doesn't
match the texture-target configured in the output caps.
This commit fixes that and adds more checks for the new behaviour.
Facilities are given to create fbo's and attach GL memory (renderbuffers
or textures). It also keeps track of the renderable size for use with
effective use with glViewport().
Rather than assuming something. e.g. zerocopy on iOS with GLES3 requires
the use of Luminance/Luminance Alpha formats and does not work with
Red/RG textures.
fxtest.c: In function ‘main’:
fxtest.c:190:3: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
GtkWidget *window;
^~~~~~~~~
With e38af23044 returning the correct contexts,
gst_gl_display_add_context() was susceptible to causing infinte loops when
adding the same GstGLContext more than once. Fix and add a test for
gst_gl_display_add_context().
Fixes glvideomixer gst-validate tests.
Some operations are unnecessary when running with only a single GL
context.
e.g. glFlush when setting a fence object as the flush happens on wait.
API: gst_gl_context_is_shared
Include gst/gl.h instead of specific headers to prevent such problems also in
the future.
In file included from ../../../../gst-libs/gst/gl/gl.h:47:0,
from ../../../../gst-libs/gst/gl/gstglbasememory.h:137,
from ../../../../gst-libs/gst/gl/gstglmemory.h:29,
from cluttershare.c:39:
../../../../gst-libs/gst/gl/gstglmemorypbo.h:51:20: error: field ‘mem’ has incomplete type
GstGLMemory mem;
^
../../../../gst-libs/gst/gl/gstglmemorypbo.h:124:24: error: field ‘parent’ has incomplete type
GstGLMemoryAllocator parent;
^
../../../../gst-libs/gst/gl/gstglmemorypbo.h:134:29: error: field ‘parent_class’ has incomplete type
GstGLMemoryAllocatorClass parent_class;
^
The base class is useful for having multiple backing memory types other
than the default. e.g. IOSurface, EGLImage, dmabuf?
The PBO transfer logic is now inside GstGLMemoryPBO which uses GstGLBuffer
to manage the PBO memory.
This also moves the format utility functions into their own file.
Add the various tokens/strings for the differnet texture types (2D, rect, oes)
Changes the GLmemory api to include the GstGLTextureTarget in all relevant
functions.
Update the relevant caps/templates for 2D only textures.
A GstGLShader is now simply a collection of stages that are
compiled and linked together into a program. The uniform/attribute
interface has remained the same.
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753854
gst_gl_memory_setup_wrapped() now takes a destroy notify function. This
destroy notify is called to track the memory life time, hence will
notify each time a memory get destroyed. This test check that the
callback count is correct.
They require to get_proc_address some functions through the
platform specific {glX,egl}GetProcAddress rather than the default
GL library symbol lookup.
The previous approach of traversing the other_context weak ref tree was
1. Less performant
2. Incorrect for context destruction removing a link in the tree
Example of 2:
c1 = context_create (NULL)
c2 = context_create (c1)
c3 = context_create (c2)
context_can_share (c1, c3) == TRUE
context_destroy (c2)
unref (c2)
context_can_share (c1, c3) returns FALSE when it should be TRUE!
This does not remove the restriction that context sharedness can only
be tracked between GstGLContext's.
Using NSApp directly seems to confuse something, as the compiler
was expecting an id<NSFileManagerDelegate>. Switched to using
[NSApplication sharedApplication], and specified the delegate
protocol on the window class as well.
Similar to https://bugzilla.gnome.org/show_bug.cgi?id=738740
Until gcc and GNUStep properly support Objective-C blocks and other
"new" features of Objective-C we can't properly support them without
making the code much more ugly.
https://bugzilla.gnome.org/show_bug.cgi?id=739152
We need to pass the X11 display to GstGL or else it will
use its own X11 Display pointer, and the GL Context won't get shared
correctly on newer X servers
1. glcontextid function is replaced by gstreamer gst_gl_context_new_wrapped .
2. call gst_init before gst_gl_display_new , seems gst_gl_display_new depends
on gst_allocator_register , which only worked after gst_init called
3. flush gstreamer OpenGL context before using shared texture, fix
flicker problem.
https://bugzilla.gnome.org/show_bug.cgi?id=735566
The reshape property was never used.
Replace the draw property with a signal.
Based on patch by Mathieu Duponchelle <mathieu.duponchelle@epitech.eu>
https://bugzilla.gnome.org/show_bug.cgi?id=704507
Before:
GST_GL_PLATFORM=cocoa GST_GL_WINDOW=cocoa
gst-launch-1.0 videotestsrc ! glimagesink
After:
GST_GL_PLATFORM=cgl GST_GL_WINDOW=cocoa
gst-launch-1.0 videotestsrc ! glimagesink
but still pass --enable-cocoa to configure script
because currently it can only be used with cocoa API.
We could later have cgl/gstglcontext_cgl.h that manages
a CGLContextObj directly and cocoa/gstglcontext_cocoa.h
would just wrap it.
So that it could be used with other Apple's window APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=729245
Use COGL_VERSION_ENCODE to check for the minimum required and maximum allowed
cogl version. In certain situations just using the COGL_VERSION_* macro name can
give you the following error:
error "COGL_VERSION_MAX_ALLOWED must be >= COGL_VERSION_MIN_REQUIRED"
This patch provides the basic infrastructure required for this.
Upload and Download has been ported to this.
Has the nice effect of allowing GstGLMemory to be our
refcounted texture object for any texture type (not just RGBA).
Should not lose any features/video formats.
We create our textures (in Desktop GL) with GL_TEXTURE_RECTANGLE,
vaapi attempts to bind our texture to GL_TEXTURE_2D which throws a
GL_INVALID_OPERATION error and as thus, no video.
Also, by moving exclusively to GL_TEXTURE_2D and the npot extension
we also remove a difference between the Desktop GL and GLES2 code.
https://bugzilla.gnome.org/show_bug.cgi?id=712287
The attribute can be defined without value regardless session-level
or media-level.
Although `gst_sdp_message_insert_attribute` can be used to set NULL,
it would be easier if `gst_sdp_message_add_attribute` accepts NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=789841
It allows encoders to detect and drop input frames which are already
late to increase the chance of the pipeline to catch up.
The QoS logic and code is directly copied from gstvideodecoder.c.
https://bugzilla.gnome.org/show_bug.cgi?id=582166
This is the same code that is in decklinkaudiosrc, audioringbuffer,
audiomixer and various other places. Have it once instead of copying it
everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=787560
If someone calls gst_app_sink_try_pull_sample they are
probably no longer interested in any preroll samples.
Useful if the user has not registered a preroll appsink callback.
Also added unit test 'test_do_not_care_preroll'
make elements/appsink.check
that fails without this patch.
https://bugzilla.gnome.org/show_bug.cgi?id=786740
There is no reason for appsink to hang onto the preroll buffer.
If needed, the application can just keep a ref on this buffer
after calling gst_app_sink_try_pull_preroll.
Also added unit test 'test_pull_preroll'
make elements/appsink.check
https://bugzilla.gnome.org/show_bug.cgi?id=786740
When dealing with streams/contents which have large duration, it is
more user-friendly to show more details in the high values (hours or days)
than in the microseconds.
This patch will use the following formatting schemes:
* Below 1hour : MM:SS.SSS
* Below 24hours : HHhMMmSSs
* Above : DDdHHhMMm
In GStreamer 1.12 and older, the GstBaseSrc live lock used to be held while
create() virtual function was called. As appsrc pushes serialized event in
that virtual function, we ended up with some deadlock while setting the
state to NULL. This test simulates this situation.
https://bugzilla.gnome.org/show_bug.cgi?id=783301
Sending an event can accepted event if the caps were rejected
because the event could be queued and processed later.
Also send a drain query in the caps test to make sure that the
event has been processed.
https://bugzilla.gnome.org/show_bug.cgi?id=781673
Performing a gst_sdp_media_get_caps_from_media() would result in
changing fields in the GstSDPMedia violating the const tag in the
function declaration.
Before there would be a line with a=rtpmap:96 VP8/90000
after, that attribute would only contain a=rtpmap:96
Fix by performing modifications on duplicated strings instead of on
the internal values.
Also add a simple test for checking that the representation doesn't
change by a gst_sdp_media_get_caps_from_media()
The path was only adding the build root. We need to also add the
prefix for the case we work with installed setup. As the search is
recursive, I had to remove any subdirectory to the already present build
root.
The term stride is confusing here, since the stride is always use
to signal the pixel row size of an image (including padding). Also
a frame may have a single stride, which adds to the confusion. This
patch uses frame-size, which simply indicate the frame size in the
case the images have some padding in between.
https://bugzilla.gnome.org/show_bug.cgi?id=780053
This allow using those property through gst-launch-1.0. This type
gained a deserilizer recently. The syntax is: <val1, val2, ...>.
Note that we also use the type int instead of uint to avoid having
to cast when specifying the values. The deserilizers assume
int by default.
https://bugzilla.gnome.org/show_bug.cgi?id=780053
In gst_video_time_code_is_valid, also check for invalid
ranges when using drop-frame TC. Refactor some code which
broke after the check was added.
https://bugzilla.gnome.org/show_bug.cgi?id=779010
See https://bugzilla.gnome.org/show_bug.cgi?id=773666
This would ideally be solved in baseparse but that requires further
thought at this point, and in the meantime it would be good to have
rawbaseparse not assert on this but handle it gracefully instead.
Duration query would return TRUE and duration=-1. This
worked in the unit test because the unit test implementation
was a bit broken.
Both queries need to access rate with a lock.
Fix broken duration query test as well. It relied on broken
behaviour by the videorate query handler, and also it was
implemented as a downstream query rather than an upstream
query. And we must return HANDLED from the probe so that the
query we intercept actually returns TRUE.
https://bugzilla.gnome.org/show_bug.cgi?id=699077
In some case we might have EncodingProfile that will be defined
in a way that, for example if a Preset is not present, another
profile for that stream should be used.
A test is added showing the feature.
https://bugzilla.gnome.org/show_bug.cgi?id=776188
To make the structs usable in bindings, and fix
gstrtspmessage.c:1188: Warning: GstRtsp:
gst_rtsp_message_parse_auth_credentials: return value: Invalid
non-constant return of bare structure or union; register as
boxed type or (skip)
https://bugzilla.gnome.org/show_bug.cgi?id=774416
