We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
We need different export decorators for the different libs.
For now no actual change though, just rename before the release,
and add prelude headers to define the new decorator to GST_EXPORT.
Those fields have been introduced in version 2 and later to define new
profiles like the format range extensions profiles (A.3.5).
NOTE: This patch breaks the parser ABI, rebuild needed.
https://bugzilla.gnome.org/show_bug.cgi?id=793876
We used to have the same enum to represent H265 profiles and idc values.
Those are no longer the same with extension profiles defined from
version 2 of the spec.
Split those enums so the semantic of each is clearer and we'll be able
to add extension profiles to GstH265Profile.
Also add gst_h265_profile_tier_level_get_profile() to retrieve the
GstH265Profile from the GstH265ProfileTierLevel. It will be used to
implement the detection of extension profiles.
https://bugzilla.gnome.org/show_bug.cgi?id=793876
There is nothing in the spec that state that framerate is not valid in
that case. This aligns GStreamer with FFMPEG behaviour for similar
streams.
https://bugzilla.gnome.org/show_bug.cgi?id=793284
SDP's are generated and consumed according to the W3C PeerConnection API
available from https://www.w3.org/TR/webrtc/
The SDP is either created initially from the connected
sink pads/attached transceivers as in the case of generating an offer or
intersected with the connected sink pads/attached transceivers as in
the case for creating an answer. In both cases, the rtp payloaded streams
sent by the peer are exposed as separate src pads.
The implementation supports trickle ICE, RTCP muxing, reduced size RTCP.
With contributions from:
Nirbheek Chauhan <nirbheek@centricular.com>
Mathieu Duponchelle <mathieu@centricular.com>
Edward Hervey <edward@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792523
According to the vp8 spec, the first partition (size can be derived from
the frame header) should have all compressed header information and we
implemented gst codecparser based on that. But it doesn't seem to be the
case with some of the streams (#792773) and libvpx
works fine because it uses the whole frame size (not the first partition
size) to initialize the bool decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=792773
As most Wayland compositors supports XWayland, X11 backend get
selected. This also realign better GStreamer decision to what
happens with GTK and other stack out there.
This patch adds code to gldownload to export the image as a
dmabuf if requested. The element now exposes memory:DMABuf as
a cap feature, and if it is selected, the element exports the
texture to an EGL image and then a dmabuf. It also implements a
fallback to system memory download in case the exportation failed.
https://bugzilla.gnome.org/show_bug.cgi?id=776927
Undefined symbols for architecture x86_64:
"_gst_gl_context_cocoa_get_type", referenced from:
__create_layer in libgstopengl_la-caopengllayersink.o
Might need some more in other headers, but first need to
clarify what exactly should be exported, there are some
inconsistencies (installed header files vs. funcs in docs).
Libraries in -bad are not covered by our API/ABI stability
guarantees, and to the best of our knowledge everyone using
this API has moved to the replacement APIs ages ago.
It causes crashes in applications because the result of
fbGetDisplay() might be in use elsewhere in the application
and Vivante doesn't seem to do any refcounting
This reverts commit 47fd4d391e.
This patch is incorrect. It doesn't actually compile, and causes a crash
because the viv-fb window implementation needs a native EGL handle
to pass to fbCreateWindow, but the GstGLDisplayEGL handleis actually
an EGLDisplay now (and gets cast to the wrong type)
When switching bitrates we set the old streams as cancelled, but it
could also be confused with a cancel due to other reasons (as an error)
and it would lead the element to stop the pipeline mistankely. This
would happen when the stream being replaced was waiting for a manifest
update on live. Ss make it sure that we are stopping for switching
bitrates to avoid erroring out.
https://bugzilla.gnome.org/show_bug.cgi?id=789457
If we're adding to the tail of the queue, it's because we're converting
a gap event, so don't block there it means we're calling from the output
thread.
https://bugzilla.gnome.org/show_bug.cgi?id=784911
Add a comment for when the state matters. Use a local var for priv in
update_time_level() to improve readability. Move the our_latency local
var below the query results checks.
We want to skip serialization for FLUSH_STOP events (apparently). We can
simplify the code to add it to the top-level conditions. There was nothing
done in the first code path if the event was FLUSH_STOP.
Just queue it like any other serialized event. This way we don't need to
check if there still are buffers in the queue.
Validated with the tests and gst-launch-1.0 pipelines.
Don't reuse the offset variables will contain a sample offset for an
intermediate time value. Instead add a segment_pos variable of type
GstClockTime for this. Use The clock-time macros to check if we got
a valid time.
Acording to the logic this cannot happen (we already check this before). So
add a assert like we do above and remove the check. This make it clearer that
we check for the offset range.
Also remove a dead assignment since we reassign this a few lines below.
Don't copy the whole event struct. Set the input params when we call the
forwarding helper. Initialize the internal fields and return values in the
helper.
This simplifies the code a lot without any functional changes apart from
not closing the display connection. Closing the display connection is
not safe to do as it is shared between all other code in the same
process and no reference counting or anything happens at the platform
layer.
1. Propagate the GstGLDisplay we create
2. Add the created GstGLContext to the propagated GstGLDisplay
Otherwise with multi-branch GL pipelines involving gtkglsink, things
will fall apart and errors will be genarated somewhere.
Except for gst/gl/gstglfuncs.h
It is up to the client app to include these headers.
It is coherent with the fact that gstreamer-gl.pc does not
require any egl.pc/gles.pc. I.e. it is the responsability
of the app to search these headers within its build setup.
For example gstreamer-vaapi includes explicitly EGL/egl.h
and search for it in its configure.ac.
For example with this patch, if an app includes the headers
gst/gl/egl/gstglcontext_egl.h
gst/gl/egl/gstgldisplay_egl.h
gst/gl/egl/gstglmemoryegl.h
it will *no longer* automatically include EGL/egl.h and GLES2/gl2.h.
Which is good because the app might want to use the gstgl api only
without the need to bother about gl headers.
Also added a test: cd tests/check && make libs/gstglheaders.check
https://bugzilla.gnome.org/show_bug.cgi?id=784779
Scenario:
A manifest starts out in live mode but then the recording is finalized
and a subsequent update changes the state to a non-live manifest when
the server has finished recording/transcoding/whatever with the full
list of fragments.
Without this patch, the manifest update task is never stopped on the
live->non-live transition and will busy loop, burning through one CPU
core.
https://bugzilla.gnome.org/show_bug.cgi?id=786275
Make a bunch of symbols private that are currently leaked
accidentally because they have a gst_* prefix and are used
internally. We mark those we can't make static with
G_GNUC_INTERNAL so that they get hidden with the autotools
build as well (although we could just pass -fvisibility=hidden
there too).
The goal here is to minimize the work needed to bring all images
to a common format. A better criteria than the number of pads
with a given format is the number of pixels with a given format.
https://bugzilla.gnome.org/show_bug.cgi?id=786078
This commit ensures that the idle probe which GstAdaptiveDemuxStream
adds to the upstream source pad is removed after use. Previously a new
probe was added to the pad whenever a fragment was downloaded, meaning
the number of pad probe callbacks being executed increased continually.
https://bugzilla.gnome.org/show_bug.cgi?id=785957
There can be twice as many stream tasks running as there are output
pads for playback of variant HLS playlists. Half of them are the
current pads, and the other half are the pads that are about to be
switched to due to a bitrate change.
The old code only stopped the current streams which could result
in a deadlock on stopping the pipeline. The changes force stopping
and joining of any prepared streams too.
https://bugzilla.gnome.org/show_bug.cgi?id=785987
Crossfading is a bit more complex than just having two pads with the
right keyframes as the blending is not exactly the same.
The difference is in the way we compute the alpha channel, in the case
of crossfading, we have to compute an additive operation between
the destination and the source (factored by the alpha property of both
the input pad alpha property and the crossfading ratio) basically so
that the crossfade result of 2 opaque frames is also fully opaque at any
time in the crossfading process, avoid bleeding through the layer
blending.
Some rationnal can be found in https://phabricator.freedesktop.org/T7773.
https://bugzilla.gnome.org/show_bug.cgi?id=784827
Found on rpi when gpu_mem is too low so there is not enough memory to
create the eglimage. But still gst_buffer_pool_acquire_buffer succeeded.
And it leads to a CRITICAL assert:
gst_egl_image_get_image: assertion 'GST_IS_EGL_IMAGE (image)' failed
https://bugzilla.gnome.org/show_bug.cgi?id=785518
Otherwise check_events() will not remove the GAP event (as the queue
tail is not the event anymore but the GAP buffer), then the GAP buffer
is handled, then the GAP event is handled again, ... forever.
Avoids dereferencing dead objects
What happens in the autovideosink case is that context 1 is created and
destroyed before all the async operations hae executed on the associated
window. When the delayed operations execute, they then reference dead
objects and crash.
We fix this by keeping refs over all async operations so the object
cannot be deleted while async operations are in flight.
https://bugzilla.gnome.org/show_bug.cgi?id=782379
This is a workaround for a regression introduced by
f4190a49c0
( adaptivedemux: Check live seeking range more often )
The goal of the previous commit was to be able to cope with non-1.0
rates on live streams which have a "seeking window" (i.e. the server
keeps around quite a bit of the live stream so you can seek back into
it).
Without that commit, two different kind of issues would happen:
* When doing reverse playback, you would never check whether you
are outside of the seekable region. And would then continuously
try to download fragments that are no longer present.
* When doing fast forward, you would end up requesting fragments
which are not present yet.
In order to determine whether one was *really* outside of the seekable
window, we check whether the current stream position is still
within the seekable region.
The *problem* though with that commit is that it assumes that subclasses
will return continuously updated seeking ranges (i.e. dependent on the
current time), which is *NOT* the case.
For example:
* dashdemux does use the current UTC to determine the seekable region
* hlsdemux uses the values from the last updated manifest
Therefore if one downloads fragments faster than realtime, for HLS
we would end up at the end of the last manifest seekable range, and
the previous commit would consider the stream as being ended... which
is not the case.
In the long run, we need to figure out a way to cope with non-1.0
rates on live streams for all types of stream (including HLS).
https://bugzilla.gnome.org/show_bug.cgi?id=783075
This is a race that was exposed by the {hls|dash}.scrub_forward_seeking
validate test.
The "race" is that a subclass might want to change format, causing
a new stream to be created (but not exposed/switched yet) and put on the
prepared_streams list. That stream will have values (including pending
segment) from the pre-seek state.
Before the stream is exposed/switched, a new seek comes in and the stream
values get updated ... but the ones that will be changed don't get updated
causing them to push out wrong segments once they are exposed.
https://bugzilla.gnome.org/show_bug.cgi?id=773159
Add a function to install the default RGBA pad templates,
but don't make them required so that there can be
GstGLFilter sub-classes with different input/output
caps if they want. Remove the hard-coded RGBA restriction in
the set_caps_features call, as it will be taken care
of by intersecting with the pad templates.
Update all the sub-classes to match
Adaptive demuxers are special demuxers that runs their own sources
internally. In this patch we flag the demuxer as being a source in order
to receive the downstream events. We then handle the EOS event by
resetting the internal state and pushing EOS on all pads. This handling
is done asynchronously to avoid blocking user thread.
https://bugzilla.gnome.org/show_bug.cgi?id=723868
When the pad has received EOS, its buffer may still be mixed
any number of times, when the pad's framerate is inferior
to the output framerate.
This was introduced by my patch in
https://bugzilla.gnome.org/show_bug.cgi?id=782962, this patch
also correctly addresses the initial issue.
On the raspberry pi no pkg-config file is provided for the bcm_host
library. We are using AC_CHECK_LIB to detect this lib with autotools,
cc.find_library() library is a closer meson equivalent.
https://bugzilla.gnome.org/show_bug.cgi?id=784026
We have to pass the "height" as height = vmeta->offset[1] / width to the
API, which of course does not work well for formats with only a single
plane. Use the whole memory size instead of the offset in that case.
Previous commit let demux call gst_uri_downloader_cancel() on _demux_reset().
Note that, _demux_reset() called during PAUSED_TO_READY and READY_TO_PAUSED.
And, it will set "cancelled" on uridownloader which blocks the use of
uridownloader. The issue is that, subclass can use the uridownloader not only
live streaming for manifest update, but also for fetching another manifests
such as variant and rendition m3u8 of hls streaming. So to unblock it,
demux should clear "cancelled" before processing initial manifest.
https://bugzilla.gnome.org/show_bug.cgi?id=783401
before broadcasting preroll.
The deadlock was as follows:
-> The subclass pushes a buffer on a newly-created stream in T1
-> We take the preroll lock in T1, to handle_preroll
-> The demuxer is stopped in T2, we take the MANIFEST_LOCK
-> T1 starts blocking because it received a reconfigure event
and needs to take the MANIFEST_LOCK
-> T2 deadlocks because it now wants the preroll_lock.
https://bugzilla.gnome.org/show_bug.cgi?id=783255
Make sure the manifest update loop is stopped before proceeding with the
resetting of the manifest data. Otherwise, the updates loop will try to
use it and it leads to a segfault
https://bugzilla.gnome.org/show_bug.cgi?id=783028
As we release the MANIFEST_LOCK in stop_tasks,
demux->priv->old_streams can be set, we need to free these
otherwise we may end up trying to dispose elements in the
READY state.
https://bugzilla.gnome.org/show_bug.cgi?id=783256
When an accurate seek is requested on a live stream, only requests the
exact value for the "starting position" (i.e. start in forward playback
and stop in reverse playback).
https://bugzilla.gnome.org/show_bug.cgi?id=782698
And to make that 100% obvious, only use variables declared within the
switch cases instead of function-wide ones.
Also remove useless one-time-use-only variable.
CID #1409857
The live seeking range was only checked when doing actual seeks. This was
assuming that the rate would always be 1.0 (i.e. the playback would
advance in realtime, and therefore fragments would always be available
since the seeking window moves at the same rate).
With non-1.0 rates, this no longer becomes valid, and therefore we need
to check whether we are still within the live seeking range when advancing.
https://bugzilla.gnome.org/show_bug.cgi?id=783075
What we want is to retry downloading the fragment on 4xx/5xx errors
however returning EOS will cause waiting for a manifest update for live
(which may be a really long time) or stop everything for non-live.
Change that to only return EOS/ERROR once we've reached the error limit.
https://bugzilla.gnome.org/show_bug.cgi?id=776609
GL_RGB565 is sized internal glformat, the corresponding glformat
should be GL_RGB and type is GL_UNSIGNED_SHORT_565. Otherwise will
return GL_INVALID_ENUM when creating texture.
https://bugzilla.gnome.org/show_bug.cgi?id=783066
This ensures that they really get processed in order with
buffers. Just waiting for the queue to be empty is sometimes not
enough as the buffers are dropped from the pad before the result is
pushed to the next element, sometimes resulting in surprising
re-ordering.
In the case an aggregator is created and pads are requested but only
linked later, we end up never updating the upstream latency.
This was because latency queries on pads that are not linked succeed,
so we never did a new query once a live source has been linked, so the
thread was never started.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
When caps changes while streaming, the new caps was getting processed
immediately in videoaggregator, but the next buffer in the queue that
corresponds to this new caps was not necessarily being used immediately,
which resulted sometimes in using an old buffer with new caps. Of course
there used to be a separate buffer_vinfo for mapping the buffer with its
own caps, but in compositor the GstVideoConverter was still using wrong
info and resulted in invalid reads and corrupt output.
This approach here is more safe. We delay using the new caps
until we actually select the next buffer in the queue for use.
This way we also eliminate the need for buffer_vinfo, since the
pad->info is always in sync with the format of the selected buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=780682
The function needs to be unlocked if any data is received, but only
end the first buffer processing on an actual buffer, synchronized events
don't matter on the first buffer processing.
https://bugzilla.gnome.org/show_bug.cgi?id=781673
With the macOS/iOS implementations, the active thread can change
multiple times over the life of a pipeline which would expose a race in
the thread tracking.
Fix by taking a ref on the active thread while the context is active.
https://bugzilla.gnome.org/show_bug.cgi?id=779202
Otherwise fall back to glDrawBuffers. Also check if glReadBuffer exists
before using it.
glDrawBuffer does not exist for GLES, only glDrawBuffers does.
https://bugzilla.gnome.org/show_bug.cgi?id=782376
This commit fixes the following assumptions with live seeking:
1) start was always valid and of type GST_SEEK_TYPE_SET
2) direction was always forward
3) stop should be offsetted when handling non-accurate seeks before
the range start position.
In order to handle more live seeking use-cases (including reverse playback),
only do non-accurate start/stop value clamping for GST_SEEK_TYPE_SET values.
Also add a bit more debugging lines for issues
https://bugzilla.gnome.org/show_bug.cgi?id=782330
When dealing with live streams, we can't rely on GstSegment calculation
since it uses the segment duration to calculate the absolute values.
But since we are dealing with live *and* we know the ranges, we can
compute the absolute seeking values using the range stop (i.e. "now")
as the END position.
Allows seeking back to "live" by using start_type:GST_SEEK_TYPE_END
and start:0
https://bugzilla.gnome.org/show_bug.cgi?id=782228
The allowed live seek ranges returned by subclasses are "inclusive", that is
to say that the "range_stop" value they return is the highest acceptable position
one can seek to (i.e. "now").
Allow seeking to exactly that value
Rationale is to allow the manifest update task to continue running while
seeks are occurring. Otherwise, if the user reliably performs a seek
before the manifest is updated, then as the manifest task is reset on
seeks (and thus the time to wait between manifest updates), the manifest
would never be updated.
This fix makes the manifest update task free-running and continously
update even during seeks.
Some actions (Qos, reconfigure, ...) might take place before we finish pushing out flush_start.
One problem would be that:
1) The QOS handling in adaptivedemux takes the MANIFEST LOCK
That QOS event comes from basesink with its PREROLL_LOCK taken
2) FLUSH_START is sent from adaptivedemux with the MANIFEST_LOCK taken and the basesink flushing handler needs to take the PREROLL_LOCK
=> deadlock
https://bugzilla.gnome.org/show_bug.cgi?id=781320
meson's configure_file emits only a comment like /* #undef ... */
for values which are unset in the configuration_data. For
gstglconfig.h, this differs from the autotools build where the
preprocessor definitions are always either 0 or 1. So loop over a
list of variables to set to zero as default.
Also sync up the gstglconfig.h.meson file with the additional
macros defined by the autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=781043
Windows aren't always removed in time, and it turns out to be
very, very hard to remove a window in a way that's not racy and
not deadlocky. Since the window itself doesn't leak, freeing
the list on object destruction is enough.
https://bugzilla.gnome.org/show_bug.cgi?id=781018
At the moment that demux is waiting manifest update, the target sequence
of fragment was advanced already. So, checking stream_has_next_fragment()
means looking for the next fragment of target fragment.
This might cause unexpected buffering if each fragment has
large duration and manifest is listing only limited number of fragments.
https://bugzilla.gnome.org/show_bug.cgi?id=780494
The GstGLFramebufferClass struct is typedeffed in
gstgl_fwd.h, and having a duplicate elsewhere is
breaking the cerbero build on my OSX machine,
even though it seems to be working in CI.
When entering this code path, we know that:
We received EOS on this pad.
We consumed all its buffers.
In any case, we want to replace vaggpad->buffer with NULL,
otherwise we will end up mixing the same buffer twice.
https://bugzilla.gnome.org/show_bug.cgi?id=781037
If set, the parent is used to proxy need-context messages from
uridownloader's http source in order to get cookies/headers
from the pipeline.
Based on a patch from Philippe Normand
https://bugzilla.gnome.org/show_bug.cgi?id=726314
When there are new pads pending for a bitrate switch, don't allow
EOS through from the old streams. It will be sent when the new pads are
ready, just before the old streams are removed.
This fixes racy bitrate switching with hlsdemux in urisourcebin
where old pads EOS before new pads appear and the entire pipeline can
EOS if those propagate fast enough
libgstgl has a dependency on libgstallocators starting with:
ed1e4c1 glupload: Add support for Vivante DirectTexture uploads
The dependency wasn't stated in the Makefile, so the build could
occasionally fail if you got unlucky with the ordering of build
steps.
https://bugzilla.gnome.org/show_bug.cgi?id=780330
In commit
> 956c4d0 gl/format: use our own GL format enum's instead of gstvideo's
the name and return type of gst_gl_format_from_video_info changed,
but some returns of the old type were missed. Here they are
updated to the correct type.
https://bugzilla.gnome.org/show_bug.cgi?id=780064
gst_player_set_uri_internal shouldn't free suburi which maybe set
by user to load external subtitle before start play. It just need
reset playbin's subutri property to NULL no matter if there was a
previous one or not.
https://bugzilla.gnome.org/show_bug.cgi?id=779453
All code interacting with Objective-C objects should now use Automated
Reference Counting rather than manual memory management or Garbage
Collection. Because ARC prohibits C-structs from containing
references to Objective-C objects, all such fields are now typed
'gpointer'. Setting and gettings Objective-C fields on such a
struct now uses explicit __bridge_* calls to tell ARC about
object lifetimes.
https://bugzilla.gnome.org/show_bug.cgi?id=777847
For duration queries on live streams, adaptivedemux ignores the query.
The problem then is that the query is answered by the downstream
qtdemux element, with the duration of the currently passing fragment.
This commit changes the behaviour of adaptivedemux to answer the duration
queries for live streams, returning GST_CLOCK_TIME_NONE.
https://bugzilla.gnome.org/show_bug.cgi?id=753879
If we need to send EOS on a pad that hasn't prerolled, generate
an error on the bus instead, otherwise the app will have no idea.
Fixes the HLS testFragmentNotFound test, which is waiting
for either EOS or an error.
To ensure that pads have caps when they are exposed, do
the exposing when all pending streams have prerolled an
output buffer, and only then EOS and remove any old pads.
Improves the switching sequence by making caps available
as soon as a pad appears.
With fixes from Seungha Yang <sh.yang@lge.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758257
send_event() of parent class (i.e., GstBinClass) iterates srcpads
to send SEEK event. And performing it per srcpad is inefficient.
So, let's drop duplicated SEEK event by checking seqnum
https://bugzilla.gnome.org/show_bug.cgi?id=776612
- Add overlay video renderer "video-sink" property, so that can be set
- In create_video_sink, it returns video sink instead of always NULL
- Add new renderer_new_with_sink() API to set video sink
https://bugzilla.gnome.org/show_bug.cgi?id=776490
'extern inline' was added in 2fb76c89 for MSVC (it was just
'inline' before), but all of this doesn't really make sense,
the functions are not going to be inlined anyway, and what
'extern inline' means exactly also appears to depend on the
Cxx standard targetted. Let's just remove the 'extern inline'
entirely. At least gcc6 still emits the exact same code as
before anyway. Fixes compilation/linking with gcc 4.8 as
used on L4T on the TK1.
The reason we previously used queue2 was to calculate the download rate,
but that wasn't entirely correct and we therefore calculate it before
queue2. We therefore now just need a simple queue.
../../../../gst-libs/gst/gl/gl.h:57:45: fatal error: gst/gl/gstglcontrolbindingproxy.h: No such file or directory
#include <gst/gl/gstglcontrolbindingproxy.h>
^
No-one's using/depending on it (it would have criticalled and not worked)
and it's causing more problems than it's solving. Store the GMainContext
in the public struct instead for subclasses to optionally use instead of
relying on the push/pop state to be correct.
https://bugzilla.gnome.org/show_bug.cgi?id=775970
This is potentially racy (in the unlikely scenario that we get two
first-time calls to gst_player_error_quark() at the same time). This
should not impact anything in terms of performance since it's only on
the error path.
The call itself could just be inlined by making GST_PLAYER_ERROR be
defined to the g_quark_from_static_string() call, but this feels ugly
from an API perspective.
If a sub class of GstGLContext does not create a group
then it currently crashes:
0 g_atomic_int_get (&share->refcount)
1 _context_share_group_is_shared (context->priv->sharegroup)
2 gst_gl_context_is_shared
3 _default_set_sync_gl
https://bugzilla.gnome.org/show_bug.cgi?id=774518
This is a subblass of VideoFilter but yet does not use any of it's
features. This also fixes issue in case the incoming images have custom
strides as the VideoMeta is no longer ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=775288
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=755036
Calling g_main_context_push_thread and then g_main_context_invoke()
(used by gst_gl_window_send_message_async()) in the same thread will
cause the invoked function to run immediately instead of being delayed.
This had implications for the creation of the OpenGL context not waiting
until the main loop had completely started up and as a result would
sometimes deadlock in short create/destroy scenarios.
https://bugzilla.gnome.org/show_bug.cgi?id=775171
626bcccff9 removed some locks that
allowed the main loop quit to occur before the context was fully
created.
2776cef25d attempted to readd them but
missed the scop of the quit() call.
Also remove the use of g_thread_join() as that's not safe to use when
it's possible to lose the last reference from the GL thread.
https://bugzilla.gnome.org/show_bug.cgi?id=775171
The smallest section ever needs to be at least 3 bytes (i.e. just the short
header).
Non-short headers need to be at least 11 bytes long (3 for the minimum header,
5 for the non-short header, and 4 for the CRC).
https://bugzilla.gnome.org/show_bug.cgi?id=775048
It's been removed and thus compiling anything against GstGLMemoryEGL
would error with:
In file included from gstomxvideodec.c:41:0:
usr/include/gstreamer-1.0/gst/gl/egl/gstglmemoryegl.h:32:41: fatal error: gst/gl/egl/gstglcontext_egl.h: No such file or directory
#include <gst/gl/egl/gstglcontext_egl.h>
^
https://bugzilla.gnome.org/show_bug.cgi?id=774886
Otherwise, when the application reuses the same UIView, we were getting
draw notifications on the previous view/layer's which weren't valid anymore
and were referencing pointers that had been freed.
https://bugzilla.gnome.org/show_bug.cgi?id=753003
This changes the failure case to require a consecutive number of
failures rather than being spread out over the entire stream.
Fixes the case where fetching the manifest was intermittent.
https://bugzilla.gnome.org/show_bug.cgi?id=774177
For formats that need to update the manifest to know about new
fragments as they're being written by the server would never receive an
updated fragment list after a seek event
https://bugzilla.gnome.org/show_bug.cgi?id=774177
- xcb is supposedly thread-safe!
videotestsrc ! glimagesink now doesn't spuriously result in a
'call XInitThreads()' error however if anybody else is using X11,
then XInitThreads() still needs to be called and multiple glimagesink's
still need XInitThreads().
Everything still takes libX11 handles as they are compatible with the xcb
variants. Unfortunately we cannot move fully over to xcb due to GLX being
entirely based on Xlib. It's also impossible to transform a xcb_connection
to a Display which means we require X11 handles.
The spec allows the core/compatibility profiles to be used
with #version 150.
Also tighten up the tests to check for default profiles being chosen
correctly.
The change to use GST_EXPORT for symbols under Windows requires
GST_EXPORTS for internal use, and that is also needed under Autotools.
The same thing is done for gstreamer-1.0.dll in -core.
The calling convention may be deprecated, but we still need it for
OpenGL. The build issue was caused by an incorrect syntax being used for
the WINAPI (__stdcall) prototype in function pointers which was accepted
by GCC but is rejected by MSVC.
With MSVC, this gives the following warning:
warning C4305: 'function': truncation from 'double' to 'gfloat'
Apparently, MSVC does not figure out what type to use for constants
based on the assignment. This warning is very spammy, so let's try to
fix it.
At minimum, we only need to glFlush() if we are in a shared GL context
environment. Move the glFinish() to when the actual wait is requested
which may be never. Improves the throughput on older GL systems without
GL3/GLES3 and/or fence sync objects.
