If connection speed is set, playlist according
to connection speed is selected as current playlist.
Problem is that the current variant of main playlist still
points to previously set variant.
If previously set variant doesn't correspond to current
playlist, then it causes unnecessary change of playlist
to the same playlist after first fragment is downloaded,
because of not updated current variant.
To fix this, we need to make sure that current variant
of main playlist corresponds to the current playlist
https://bugzilla.gnome.org/show_bug.cgi?id=758946
Don't jump backward to 3 files from the end of the playlist
when switching variants - it just means we downloaded
fragments fast and caught up to the end of the playlist.
Disable that by treating a variant switch as a playlist
update, not a restart due to a seek or so.
If the stream is discont, we must provide a timestamp in any case. Elements
like tsdemux are not going to output anything if we give a NONE timestamp
after a discont.
Also marking a stream as discont if a playlist change was not successful would
lead to the above situation, but in that case we are not required at all to
mark the stream discont as we're still at the old playlist.
commit da5c41930c removed the two uses of the
new value of data:
channels = opus_packet_get_nb_channels (data);
bandwidth = opus_packet_get_bandwidth (data);
Since then, data isn't being used between incrementing it by packet_offset
and going out of scope. Removing this uneeded statement.
The scene graph can be initialized when the we receive window handle change
notification and so we will not receive a scenegraph initialization
notification. Initialize ourself in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=758337
The result of the two expressions will be promoted to guint64 anyway,
perform all the arithmetic in 64 bits to avoid potential overflows.
CID 1338690, CID 1338691
sample_rate might be used uninitialized if !sink_caps is TRUE. Initialize
it to the default used in gst_codec_utils_opus_parse_caps () when there is
no rate defined in the caps.
CID 1338695
There is a possibility that the _get_caps impl will be called with the
feature in the filter caps which when interecting with the template,
will return EMPTY and therefore fail negotiation.
https://bugzilla.gnome.org/show_bug.cgi?id=757854
It's for the upstream element driving the pipeline to
handle seeks and send flush events or not, filters
should not interfere here, otherwise downstream pads
could be flushing before upstream pads are flushing,
which can result in GST_FLOW_ERROR being sent instead
of GST_FLOW_FLUSHING when trying to forward sticky
events at just the wrong moment.
No need to use G_GINT64_FORMAT for potentially negative values of
GstClockTimeDiff. Since 1.6 these can be handled with GST_STIME_FORMAT.
Plus it creates more readable values in the logs.
https://bugzilla.gnome.org/show_bug.cgi?id=757480
We always require the channel-mapping-field. If it's 0 we require nothing
else, otherwise we need channels, stream-count and coupled count to be
available.
oggdemux is outputting the meta now, and only outputs if it should really
apply to the current buffer. Previously we would skip N samples also if we
started the decoder in the middle of the stream.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
It is doing the wrong thing because of the Opus pre-skip: while the timestamps
are shifted by the pre-skip, the granule positions are not shifted.
oggmux is doing the right thing here already.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
The first frame has lookahead less samples, the last frame might have some
padding or we might have to encode another frame of silence to get all our
input into the encoded data.
This is because of a) the lookahead at the beginning of the encoding, which
shifts all data by that amount of samples and b) the padding needed to fill
the very last frame completely.
Ideally we would use LPC to calculate something better than silence for the
padding to make the encoding as smooth as possible.
With this we get exactly the same amount of samples again in an
opusenc ! opusdec pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Waylandsink needs exception code in gst_wayland_sink_set_window_handle().
After making sink->window, User can call
gst_wayland_sink_set_window_handle(). It is the user's fault, but
Waylandsink needs to handle the exception, if not then sink->window is
changed and rendering fails.
https://bugzilla.gnome.org/show_bug.cgi?id=747482
Waylandsink needs exception code in gst_wayland_sink_set_context(). After
calling gst_wayland_sink_set_context(), below code is set.
GST_ELEMENT_CLASS (parent_class)->set_context (element, context); but, If
user can call onemore. It is user's fault. but waylandsink need to
exception.
https://bugzilla.gnome.org/show_bug.cgi?id=747482
The stream->cur_seg_template is set to the lowest available segment
template (representation or adaptation or period, in this order).
Because the template elements are inherited, the lowest template will
have all the elements the parents had, so there is no need to check the
parent for an element that is not found in the child (eg initialisation
or index).
https://bugzilla.gnome.org/show_bug.cgi?id=752714
The standard does not seem to make any particular explicit not
implicit reference to the signedness of durations, and the code
does not rely on such, nor on the negativity of the -1 value
that's used as a placeholder when a duration property is not
present in the XML.
https://bugzilla.gnome.org/show_bug.cgi?id=750847
According to the standard:
"SegmentBase, SegmentTemplate and SegmentList shall inherit
attributes and elements from the same element on a higher level.
If the same attribute or element is present on both levels,
the one on the lower level shall take precedence over the one
on the higher level."
gst_mpdparser_parse_segment_list_node will now discard any inherited
segment URLs if the parsed element defines some too.
https://bugzilla.gnome.org/show_bug.cgi?id=751832
Solved with a simple shader templating mechanism and string replacements
of the necessary sampler types/texture accesses and texture coordinate
mangling for rectangular and external-oes textures.
Add the various tokens/strings for the differnet texture types (2D, rect, oes)
Changes the GLmemory api to include the GstGLTextureTarget in all relevant
functions.
Update the relevant caps/templates for 2D only textures.
If MPD@suggestedPresentationDelay is not present in the manifest,
dashdemux selects the fragment closest to the most recently generated
fragment. This causes a playback issue because this choice does not allow
the DASH client to build up any buffer of downloaded fragments without
pausing playback. This is because by definition new fragments appear on
the server in real-time (e.g. if segment duration is 4 seconds, a new
fragment will appear on the server every 4 seconds). If the starting
playback position was n*segmentDuration seconds behind "now", the DASH
client could download up to 'n' fragments faster than realtime before it
reached the point where it needed to wait for fragments to appear on the
server.
The MPD@suggestedPresentationDelay attribute allows a content publisher
to provide a suggested starting position that is behind the current
"live" position.
If the MPD@suggestedPresentationDelay attribute is not present, provide
a suitable default value as a property of the dashdemux element. To
allow the default presentation delay to be specified either using
fragments or seconds, the property is a string that contains a number
and a unit (e.g. "10 seconds", "4 fragments", "2500ms").
Corrected the parsing of a segment template string.
Added unit tests to test the segment template parsing.
All reported problems are now correctly handled.
https://bugzilla.gnome.org/show_bug.cgi?id=751735
When building the media segment list using a SegmentList node, the
gst_mpd_client_setup_representation function will iterate through the
list of S nodes and will expect to find a matching SegmentUrl node. If
one does not exist, the code made an illegal memory access.
https://bugzilla.gnome.org/show_bug.cgi?id=752496
These are used to apply restrictions on what the MPD file may
use, so no profile means no restrictions.
Besides, nothing actually uses the profiles (yet) anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=750869
This wl_display proxy is temporary only until waylandsink goes NULL,
at which point the connection to the display is disposed. Unfortunately,
if this is advertised as a GstContext, playbin will cache it and re-feed
it to the sink when it goes PLAYING again, but the wl_display pointer
will at that point be invalid and cause a crash.
Another solution to the problem would be to also cache the GstWlDisplay
object inside the GstContext, which would automatically ref-count
the display connection, but I see no reason in doing that at the moment,
as there are no known users of this GstContext outside waylandsink.
It's probably better to avoid chasing hidden refcounts.
https://bugzilla.gnome.org/show_bug.cgi?id=756567
If a (master) playlist contains a variant list entry without a
URI then during parsing of the next variant list entry we are
a) leaking the entry we're currently parsing (new_list), and
b) free'ing the pointer to the previous list entry (list) without
updating the pointer.
Hence when then adding the URI for the latest parsed entry, incorrect
information is stored, as the information is used from 'list' which
is not valid memory anymore, also leading to crashes.
Fix this by correctly storing the new variant list entry pointer
as needed.
https://bugzilla.gnome.org/show_bug.cgi?id=756861
Nicer to read, two lines of code less, and also the callback
function should've been a GCompareFunc that returns a gint
and not a boolean (it did work correctly, was just confusing).
Currently float and int are supported by default. vec2, vec3, vec4
and mat4 are supported if graphene is used. Of course if one wants
to set custom uniforms they can also be set using the create-shader
signal.
We know that the gchar arrays contain at least one string. Furthermore,
g_strfreev() checks if the array is NULL and simply returns if it is.
Hence, there is no need to check if the array is empty before using
g_strfreev().
CID 1327412-1327415
In order to ensure the sequence_position will always be consistently updated,
store the current file duration.
This way, when we advance, we can always increment the position based on what
was previously outputted.
https://bugzilla.gnome.org/show_bug.cgi?id=752132
One may not have an GstGLContext available or current in the thread where one
would need to update the shader. Support this by signalling create-shader
whenever the one-shot 'update-shader' is set to TRUE.
A GstGLShader is now simply a collection of stages that are
compiled and linked together into a program. The uniform/attribute
interface has remained the same.
Allows playlists that are missing the mediasequence information to
be correctly parsed. If the playlist was updated without reseting
the mediasequence it would constantly increase over subsequent updates,
leading to issues during playback.
For live streams, we want to make sure there's a certain distance
between the sequence to play and the last (earliest) fragment.
The problem is that it assumes there are at least 3 fragments in
the playlist, which might not always be the case (like in the case
of a server restarting and gradually adding fragments).
In order to avoid ending up with negative sequence numbers (which
will just loop forever), limit the new target sequence number to
the highest of:
* either the first sequence number of the playlist (fallback)
* or 3 fragments from the last one (standard behaviour)
Change the gstcvdilate.c file extension to cpp and add it into Makefile for
consistency with other elements of opencv and because Opencv not support C
language in new API 2.4.11.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
Change the file extension to cpp and add it into Makefile for consistency
with other elements of opencv and because Opencv not support C language in
new API 2.4.11.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
Change the file extension to cpp and add it into Makefile for consistency
with other elements of opencv and because Opencv not support C language in
new API 2.4.11.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
Change the gstretinex.c file to cpp and add it into Makefile.
It is necessary to migrate the retinex element to C++,
because new Opencv API leaves obsolete functions like cvSmooth.
This element uses this function.
You can see in this link:
http://docs.opencv.org/modules/imgproc/doc/filtering.html?
highlight=cvsmooth#void cvSmooth(const CvArr* src, CvArr* dst,
int smoothtype, int size1, int size2, double sigma1, double sigma2)
https://bugzilla.gnome.org/show_bug.cgi?id=754148
The cascade classifier changes its structure on new version of OpenCV 2.4.11.
It is need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the old and new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=752528
Change the gsthanddetect.c file to cpp and add it into Makefile.
It is necessary to migrate the handdetect plugin to C++,
in order to load new and old classifiers, to make handdetect work
with newer versions of Opencv.
https://bugzilla.gnome.org/show_bug.cgi?id=752528
This is mostly a copy/paste of the negotiation function in
basetextoverlay, which was improved recently to handle many more cases.
This will allow us to negotiate a window size with downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=753824
Doing the contrary has no effect and the consequence is that playback
will start with the lowest bitrate even if we can already handle
higher bitrate.
https://bugzilla.gnome.org/show_bug.cgi?id=755108
Not doing this can lead the demuxer to attempt downloading fragments
for an invalid start time. The server would then send a HTTP
Precondition failed error, the demuxer would try some more times to
download the invalid fragment and eventually error out.
https://bugzilla.gnome.org/show_bug.cgi?id=754523
Move the TAG defines directly into the code, not sure what
their purposes is, these are printf format strings so having
them directly as literals in the code where they're used
makes the code easier to follow.
Remove playlist_str GString variable from GstM3U8Playlist struct,
since it's only used temporarily in playlist_render(). Might just
as well keep it local then.
Transform is set to be done in place in gstcvdilateerode.c, so the in-place
transform function is always used and the other is redundant. Removing it.
https://bugzilla.gnome.org/show_bug.cgi?id=753885
Transform is set to be done in place in gstcvdilateerode.c, so the in-place
transform function is always used and the other is redundant. Removing it.
https://bugzilla.gnome.org/show_bug.cgi?id=753885
When running GStreamer from uninstalled sources, the location of the haar
cascade files will be local. Check if running in uninstalled and set the
file paths accordingly.
Move handling of a GstSample in a separate function, and unref the
sample after calling it. libass copies the font data so we don't need to
keep it around.
https://bugzilla.gnome.org/show_bug.cgi?id=755759
Ignore the normal gap threshold for laggy streams and
immediately catch all streams up to the end of the segment
when processing gap updates for a segment during a
still frame sequence.
https://bugzilla.gnome.org/show_bug.cgi?id=755680
Create src pads for Representations that contain timed-text subtitles,
both when the subtitles are encapsulated in ISO BMFF (i.e., the
Representation has mimeType "application/mp4") and when they are
unencapsulated (i.e., the Representation has mimeType
"application/ttml+xml").
https://bugzilla.gnome.org/show_bug.cgi?id=747774
The same has to be done for AdaptationSet and SegmentList nodes still.
Also this does not correctly implement the semantics: by default Period (and
other nodes) should only be loaded when needed, not in the very beginning. We
need to implement lazy loading for them, which means adjusting
gst_mpd_client_setup_media_presentation().
https://bugzilla.gnome.org/show_bug.cgi?id=752230
gst_uri_join_strings() will return the second parameter if it is an absolute
URI. No need to do a (wrong) check if the URI is absolute or not beforehand.
https://bugzilla.gnome.org/show_bug.cgi?id=755134
In case the format changed fast and the pending format is different
than the currently set but the currently set is equal to the pending
one we could end up having mismatch between the finally set format
and the data stream format.
https://bugzilla.gnome.org/show_bug.cgi?id=755542
The spec defines these as signed in 5.3.9.6.1.
Since we don't support this behavior, warn and default to 0
(non repeating), which is the spec's default when the value
is not present.
https://bugzilla.gnome.org/show_bug.cgi?id=752480
Even if it doesn't actually advance the subfragment in the default way
for streams that have subfragments, it can help the base class to return
EOS when there is no more fragments instead of signaling it that it should
continue downloading.
https://bugzilla.gnome.org/show_bug.cgi?id=755042
This reverts commit 626a8f0a74.
This allows us to get the plain presentation offset and the period start time
separately. We have to adjust the timestamp by the presentation offset, but
the period start time should only adjust the stream time and running time.
https://bugzilla.gnome.org/show_bug.cgi?id=752409
This reverts commit e671ad25a9.
The timestamps should restart at 0 again for each period, but we have to
adjust the segment to map those timestamps to the actual stream time and
running time of that period.
Otherwise we would have timestamps that conflict with the ones from the tfdt
inside the MP4 container, which are restarting at 0 for each period.
https://bugzilla.gnome.org/show_bug.cgi?id=752409
In dash isombff profile the fragment is split into subframents where
bitrate switching is possible. Also take that into consideration
when checking if a stream has next fragments.
This GstStreamPeriod start value is expressed in nanoseconds,
and the glib time addition function expects microseconds.
There seems to have been a confusion with GstPeriodNode's start
field, which is expressed in milliseconds.
Additionally, add a warning if the timestamp modification did
not succeed, and NULL was returned.
The cvSmooth cvNot functions and do not have the correct input parameters.
Furthermore, cvSmooth function is not necessary for edge detection,
because the Canny function makes the step of smoothing the image.
And cvNot function is useless because there aren't changes if this
function is eliminated.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
The cascade classifier changes its structure on new version of OpenCV 2.4.11.
It is need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the old and new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
For PROP_PROFILE case that exist inside gst_face_blur_set_property
function loads the new XML file in the CvHaarClassifierCascade property
without first checking that it is released because maybe there is an XML
file previously loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Changes inside the gst_face_blur_load_profile function, the number of
input parameters and in lines where it is used due to it cannot be used
generically.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Change the gstfaceblur.c file to cpp and add it into Makefile.
It is necessary to migrate the faceblur plugin to C++,
in order to load new and old classifiers, to make faceblur work
with newer versions of Opencv.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Fix some very dubious code. The class methods should always
be set, and the instance-specific check should then be done
inside the method. For data_received that's there already, for
finish_fragment we need to add it.
https://bugzilla.gnome.org/show_bug.cgi?id=753937
Some live streams (eg youtube) don't remove fragments in order to allow
seeking back in time (live + vod).
When gst_m3u8_client_has_next_fragment is called, we are getting wrong fragment
because current_file points in first file of the fragments list resulting in
watching the stream from the beginning again.
This patch sets current_file to nth fragment for live streams, then on
gst_m3u8_client_has_next_fragment will keep up with the live stream.
https://bugzilla.gnome.org/show_bug.cgi?id=753344
This allow properly copying selected meta, like the composition
overlay. Note that output buffer need to be readable, but GlUpload
keeps a ref. For now, simply drop GlUpload ref after perform,
leaving that ref has no purpose. The method shall be removed
in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=754047
Use base class default method instead of only copying flags and
timestamp. This way, selected meta's like compostion overlay will
be passed downstream as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=754047
During allocation query, when this element is not passthrough, it must
relay the overlay compostion meta and it's parameters. Fortunatly, base
transform can do this for us.
https://bugzilla.gnome.org/show_bug.cgi?id=753850
Previous patch did not handle the case where an encoding (e.g. UTF-8) is
specified in the <xml ?> element. Added an extra test for with and without
encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=753813
When running on an STB, the function
gst_mpdparser_get_xml_node_as_string causes a segmentation fault. This
code works correctly on a Linux desktop.
Looking at the libxml documentation, the xmlNodeDump is deprecated.
Replacing the use of xmlNodeDump with xmlNodeDumpOutput fixes the
segfault on the STB and removes the use of the deprecated function.
Some distributions store OpenCV files in /usr/share/opencv and some others
(and default when building from source) install them in
/usr/share/OpenCV. Support both to find cascade files.
https://bugzilla.gnome.org/show_bug.cgi?id=753651
It is faster than doing a query that propagates downstream and
should be enough
Elements: faac, gsmenc, opusenc, sbcenc, voamrwbenc, adpcmenc, sirenenc
When seeking to the last second of a mpd it would reject the seek
because the comparison was < instead of <=
This fails the important use case of seeking to the end of a file
to play it back in reverse from the end
We need to keep the active buffer (the one we have retreive a
texture id from) otherwise it's racy and upstream may upload
new content before we have rendered or during later redisplay.
The urn:mpeg:dash:utc:http-head:2014 method of time synchronisation
uses an HTTP HEAD request to a specified URL and then parses the
Date: HTTP response header.
This commit adds support to dashdemux for this method of time
synchronisation by making a HEAD request and then parsing the Date:
response.
This commit adds support to gstfragment to return the HTTP headers
and to uridownloader to support HEAD requests. To avoid creating a
new API, the RANGE get function is re-used (abused?) with start=-1
and end=-1 to indicate a HEAD request.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
This commit addresses the following items from the code review:
use a portable way to define NTP_TO_UNIX_EPOCH,
fix memory leak on error, and
add documentation to UTCTiming parse functions
Using LL is not portable, so the G_GUINT64_CONSTANT needs to be instead.
If an error occurs during DNS resolution, the GError was not being
released, causing a memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
Unless the DASH client can compensate for the difference between its
clock and the clock used by the server, the client might request
fragments that either not yet on the server or fragments that have
already been expired from the server. This is an issue because these
requests can propagate all the way back to the origin
ISO/IEC 23009-1:2014/Amd 1 [PDAM1] defines a new UTCTiming element to allow
a DASH client to track the clock used by the server generating the
DASH stream. Multiple UTCTiming elements might be present, to indicate
support for multiple methods of UTC time gathering. Each element can
contain a white space separated list of URLs that can be contacted
to discover the UTC time from the server's perspective.
This commit provides parsing of UTCTiming elements, unit tests of this
parsing and a function to poll a time server. This function
supports the following methods:
urn:mpeg:dash:utc:ntp:2014
urn:mpeg:dash:utc:http-xsdate:2014
urn:mpeg:dash:utc:http-iso:2014
urn:mpeg:dash:utc:http-ntp:2014
The manifest update task is used to poll the clock time server,
to save having to create a new thread.
When choosing the starting fragment number and when waiting for a
fragment to become available, the difference between the server's idea
of UTC and the client's idea of UTC is taken into account. For example,
if the server's time is behind the client's idea of UTC, we wait for
longer before requesting a fragment
[PDAM1]: http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=66068
dashdemux: support NTP time servers in UTCTiming elements
Use the gst_ntp_clock to support the use of an NTP server.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
This reverts commit ff11a1a8a0.
It can't be assumed that all buffers in a buffer list have the same SSRC or
are RTP or RTCP only. It has to be checked for every single buffer, and one
basically has to do the processing that is done by the default chain_list
implementation.
The current code was ignoring the par/dar aspect when transforming
from window coordinates to stream coordinates resulting in incorrect
coordinates being sent upstream in the navigation events.
The payloader didn't copy anything so far, the depayloader copied every
possible meta. Let's make it consistent and just copy all metas without tags or
with only the audio tag.
https://bugzilla.gnome.org/show_bug.cgi?id=751774
Checking the vector is not empty and checking the vector size is greater
than zero are the same thing, this is a redundancy in the code. Only
checking the vector is not empty is sufficient, therefore removing the
other check.
https://bugzilla.gnome.org/show_bug.cgi?id=744763
Add a pivot vector for setting the origin of rotations and scales.
With the pivot point the rotation and scale operations can have
different origins. This adds the ability to rotate around different points.
Currently the default (0, 0) pivot point is possible,
a rotation around the center, and zooming into and out of the center.
With an pivot point this is optional.
I defined the following image coordinates for the pivot point:
(-1,1) ------------------------- (1,1)
| |
| |
| |
| (0,0) |
| |
| |
| |
(-1,-1) ------------------------- (1,-1)
Example:
Rotate the video at the bottom left corner
gst-launch-1.0 videotestsrc \
! gltransformation \
scale-x=0.5 \
scale-y=0.5 \
rotation-z=25.0 \
pivot-x=-1.0 \
pivot-y=-1.0 \
! glimagesink
The pivot-z option defines the pivot point in 3D space.
This only affects rotation, since we have no Z data to scale.
With this option a video can be rotated around a point in 3D space.
Example:
Rotate around point behind the video:
gst-launch-1.0 videotestsrc \
! gltransformation \
rotation-x=10.0 \
pivot-z=-4.0 \
! glimagesink
Since the profile gchar depends on DEFAULT_FACE_PROFILE, it should never be
NULL. Furthermore CascadeClassifier accepts any input, even
an empty one, but if the profile fails to load it returns an empty cascade.
Check for this instead, and inform the user if there was an Error.
The gst_dash_demux_stream_update_fragment_info function could call
gst_dash_demux_stream_update_headers_info function twice. The
gst_dash_demux_stream_update_headers_info function will set header_uri and
index_uri to some newly allocated strings. The values set by the first call of
gst_dash_demux_stream_update_headers_info will leak when the function is
called for a second time.
The solution is to call gst_adaptive_demux_stream_fragment_clear before the
second call of gst_dash_demux_stream_update_headers_info
https://bugzilla.gnome.org/show_bug.cgi?id=753188
Check if profile is NULL before dereferencing it with new. Also, new will
never return NULL; if allocation fails, a std::bad_alloc exception will be
thrown instead. Remove check for a NULL return.
CID #1315258
The ref_object and object parameters were the wrong way around.
For the typical use case where an application is setting a
GstControlBinding on the returned ghost pad:
1. our control binding would be removed when the new one was set
2. sync_values calls were not being forwarded from the internal
pad to the ghost pad.
If an application attempts to perform other control binding
operations (get_* family of functions) on the internal pad, they
will also be forwarded to the ghost pad where a possible
GstControlBinding will provide the necessary values.
Only copy the values from the parent if the current node doesn't
have that value, they were being copied from the parent and
then overwriten by the child node, leaking the parent's copy
With the switch of gstopencv.c to C++, all OpenCV elements are built with
g++. The template variable clashes with C++'s feature of the same name.
Rename template to templ to avoid any clash.
The cascade classifier changes its structure on new version of OpenCV.
The need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=748377
This is used to proxy GstControlBinding to the pad on the
parent object. This avoid having to sync the values in the proxy pad,
this is too early if you have a queue between the pad and the actual
aggregation operation.
https://bugzilla.gnome.org/show_bug.cgi?id=734060
When the sink does not know the window size (e.g not created yet)
it will not add any param to the the composition meta. This is no
reason not to forward this meta API. Fixes issue where it could not
attach until we resize the window.
https://bugzilla.gnome.org/show_bug.cgi?id=745107
The coordinate are relative to the texture dimension and not
the window dimension now. There is no need to pass the window
dimension or to update the overlay if the dimension changes.
https://bugzilla.gnome.org/show_bug.cgi?id=745107
Adds an GST_VIDEO_OVERLAY_COMPOSITION_META_API_TYPE query to glupload
and glimagesink. Detects the query from the downstream elements, so
it is executed only when downstream supports the overlay API.
This makes pipelines with textoverlay ! glupload ! gldownload ! xvimagesink possible.
Uses allocation meta struct for passing the window size upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=745107
Previously, PLC frames always had a length of 120ms, which caused audio
quality degradation and synchronization errors. Fix this by calculating an
appropriate length for the PLC frame.
The length must be a multiple of 2.5ms. Calculate a multiple of 2.5ms that
is nearest to the current PLC length. Any leftover PLC length that didn't
make it into this frame is accumulated for the next PLC frame.
https://bugzilla.gnome.org/show_bug.cgi?id=725167
If a ContentProtection element is present in an AdaptationSet element,
send Protection events on the source pad, so that qtdemux can use this
information to correctly generate its source caps for DASH CENC
encrypted streams.
This allows qtdemux to support CENC encrypted DASH streams where the
content protection specific information is carried in the MPD file
rather than in pssh boxes in the initialisation segments.
This commit adds a new function to the adaptivedemux base class to allow
a GstEvent to be queued for a stream. The queue of events are sent the
next time a buffer is pushed for that stream.
https://bugzilla.gnome.org/show_bug.cgi?id=705991
They require to get_proc_address some functions through the
platform specific {glX,egl}GetProcAddress rather than the default
GL library symbol lookup.
Document that "widget" property must be accessed from the
main thread (where GTK is running). This is the same for
state transition on these elements. It is very natural to
do so un GTK applications.
This is a "pseudo" base class. Basically it's a shared instance
and class structure and a shared set of function between the
two widget. It cannot have it's own type like normal base class
since the one instance will implement GtkGLArea while the other
implements GtkDrawingAreay. To workaround this, the parent instance
and class is a union of both.
https://bugzilla.gnome.org/show_bug.cgi?id=752441
I notice that if you stop the pipeline during a renegotiation
the upload may be NULL while an allocation query is being run.
In that scenario, returning FALSE to the allocation query is the
best thing.
Move back the default property at the same place they are in the
other sink. This helps when using a diff viewer to synchronized
this unfortunate copy paste.
https://bugzilla.gnome.org/show_bug.cgi?id=751104
In GTK dispose can be called before the last ref is reached. This
happens when you close the container window. The dispose will be
explicitly called, and destroyed notify will be fired. This patch
fixes this race by properly tracking the widget state.
In the sink, we now set the widget pointer to NULL, so the widget
will properly get created again if you set your pipeline to NULL
state after the widget was destroy, and set it back to PLAYING.
https://bugzilla.gnome.org/show_bug.cgi?id=751104
Very much in the same spirit as the Gtk GL sink
Two things are provided
1. A QQuickItem subclass that renders out RGBA filled GstGLMemory
buffers that is instantiated from qml.
2. A sink element that will push buffers into (1)
To use
1. Declare the GstGLVideoItem in qml with an appropriate
objectName property set.
2. Get the aforementioned GstGLVideoItem from qml using something like
QQmlApplicationEngine engine;
engine.load(QUrl(QStringLiteral("qrc:/main.qml")));
QObject *rootObject = engine.rootObjects().first();
QQuickItem *videoItem = rootObject->findChild<QQuickItem *> ("videoItem");
3. Set the videoItem on the sink
https://bugzilla.gnome.org/show_bug.cgi?id=752185
Checking for a parent is not enough, it must have a toplevel one.
If widget has no toplevel parent then add it in a GtkWindow, that
make it usable from gst-launch-1.0.
https://bugzilla.gnome.org/show_bug.cgi?id=751104
Moved gst_mpd_client_get_next_segment_availability_end_time and
gst_mpd_client_add_time_difference functions to be grouped with
functions from the same category.
https://bugzilla.gnome.org/show_bug.cgi?id=752027
Corrected the initialisation of mimeType in
gst_mpdparser_get_list_and_nb_of_audio_language: the variable is used
in a loop, so it must be set to NULL at the beginning of each iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=751911
Before returning the next fragment duration value, the
gst_mpd_client_get_next_fragment_duration function tries to validate it.
But the condition was incorrect.
https://bugzilla.gnome.org/show_bug.cgi?id=751539
We're interested in the offset between the period start timestamp and the
actual media timestamp so that we can properly correct for it. The absolute
presentation offset to timestamp 0 is useless as the only thing we really
care about is the offset between the current fragment timestamp and the
media timestamp.
Otherwise we will look for segments after the period usually. The seek
timestamp is relative to the start of the first period and we have to
select a segment relative to the current period's start.
We didn't do this for fragments that are generated on demand from a template,
only for the other cases when they were all generated upfront. This caused
fragment timestamps to start from 0 again for each new period.
If not set, the timeShiftBufferDepth has a default value of -1.
The standard says that this should be interpreted as infinite.
The gst_mpd_client_check_time_position function incorrectly compares
timeShiftBufferDepth with 0 instead of -1 to determine if it was set.
https://bugzilla.gnome.org/show_bug.cgi?id=751500
The last parameter of gst_mpd_client_add_media_segment function is a
duration. But when called from gst_mpd_client_setup_representation, the
last argument was wrongly set to PeriodEnd
https://bugzilla.gnome.org/show_bug.cgi?id=751449
The period start information, calculated in gst_mpd_client_setup_media_presentation
function is stored in stream_period->start. The information read from
xml file and stored in stream_period->period->start is not changed.
If the xml file does not contain the period start information,
stream_period->period->start will be -1.
The function gst_mpd_client_get_next_segment_availability_end_time wants to
use period start time, but incorrectly uses stream_period->period->start
(value from xml file, which could be -1) instead of stream_period->start
(computed value)
https://bugzilla.gnome.org/show_bug.cgi?id=751465
According to ISO/IEC 23009-1:2014(E), chapter 5.3.2.1
"The Period extends until the PeriodStart of the next Period, or until
the end of the Media Presentation in the case of the last Period."
This means that a configured value for optional attribute period duration
should be ignored if the next period contains a start attribute or it is
the last period and the MPD contains a mediaPresentationDuration attribute.
https://bugzilla.gnome.org/show_bug.cgi?id=750797
Support video with multiview info in the caps, transform
it to mono anaglyph by default, but allow for configuring
other output modes and handoff to the app via
the draw signal.
https://bugzilla.gnome.org/show_bug.cgi?id=611157
Added some warning messages in gst_mpd_client_setup_streaming to help
debug situations when the function will return FALSE.
Renamed a wrongly spelled variable.
https://bugzilla.gnome.org/show_bug.cgi?id=751149
Corrected some comments in gstmpdparser.h file.
Moved gst_mpd_client_get_adaptation_sets function to be grouped with
other functions from AdaptationSet group
https://bugzilla.gnome.org/show_bug.cgi?id=751149
The gst_mpdparser_get_rep_idx_with_max_bandwidth function assumes
representations are ordered by bandwidth and incorrectly returns the
first one when wanting the one with minimum bandwidth.
Corrected gst_mpdparser_get_rep_idx_with_max_bandwidth function to get the
correct representation in case max_bandwidth parameter is 0.
https://bugzilla.gnome.org/show_bug.cgi?id=751153
Getting the current viewport and modifying it relatively will produce an
interesting feedback loop during widget resizing. Over a few frames we
will gradually move the viewport a bit until it converged again, adding
unnecessary additional borders at the top and left.
We now know that pool caching can cause renegotiation issues
when an element in the pipeline change from passthrough to not
passthrough. As it's not needed, don't cache existing pools.
https://bugzilla.gnome.org/show_bug.cgi?id=748344
Added a check for a_node->ns before accessing a_node->ns->href in
gst_mpdparser_get_xml_node_namespace. This could happen if the xml
is missing the default namespace.
https://bugzilla.gnome.org/show_bug.cgi?id=750866
If the presentationTimeOffset attribute of a DASH manifest contains
a value that is larger than 2^32, gstmpdparser incorrectly calculates
the stream's presentation time offset. This is due to two bugs:
1: Using gst_mpdparser_get_xml_prop_unsigned_integer rather than
gst_mpdparser_get_xml_prop_unsigned_integer_64 to parse the
attribute
2: gst_mpd_client_setup_representation multiplying the value by
GST_SECOND and then dividing by timescale
https://bugzilla.gnome.org/show_bug.cgi?id=750804
This patch allow going gst-inspect-1.0 on these elements removing
ugly crash that was previously occurring. The method consist of
making the widget creation as lazy as possible. This way we don't
endup doing gtk_init() before the application. We also ref_sink()
the widget, so we don't crash if the parent widget is discarded,
and cleanly error out with GL if the widget has no parent window,
because calling gtk_widget_realized() can only be done if the widget
has been parented to a window).
This reverts commit 4ca3a22b6b.
The connection-speed=0 is used as a special value in the property
of hlsdemux to mean 'automatic' selection, m3u8.c doesn't need
to know about that as it should be as simple as possible.
So this patch hides this automatic selection documented in hlsdemux
into m3u8 logic and I think the gets harder to understand the code.
It also makes the hlsdemux unit tests work again
https://bugzilla.gnome.org/show_bug.cgi?id=749328
This reverts commit 37011e5198.
This change was actually completely unnecessary, the streams in question are
marked as static and are not considered live anyway.
Otherwise we'll only get half of its bits printed on 32 bit architectures.
For this, promote the %d-style format strings to something that accepts
64 bit integers with G_GINT64_MODIFIER.
Using format strings from an untrusted source without validation is
calling for problems, and at least allows to remotely crash your application.
If not worse.
In live situations, it is not uncommon for the current fragment to end
up out of the (updated) play range (lowest/highest sequence). But the next
fragment to play *is* present in the play range.
When advancing, if we can't find the current GstM3U8MediaFile, don't abort
straight away. Instead, look if a GstM3U8MediaFile with the next sequence value
is present, and if so switch to it.
https://bugzilla.gnome.org/show_bug.cgi?id=750028
Previously when compiling GstGL with both GL and GLES2,
GL_RGBA8 was picked from GL/gl.h. But a clash may happen at
runtime when one is selecting GLES2.
gst_gl_internal_format_rgba allows to check at runtime
if it should use GL_RGBA or GL_RGBA8.
The functions to get the next fragment, next fragment timestamp and to advance
to the next fragment need to work differently when stream->segments is NULL.
Use logic similar to that introduced by commit 2105a310 to perform these
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=749684
Previously the VPS unit was detected and all next packets where copied
into the header buffer assuming only SPS and PPS would follow. This is
not always true, also other types of NAL units follow the VPS unit and
where copied to the header buffer. Now the VPS/SPS/PPS are explicitely
detected and copied in the header buffer.
1. Set the sync point after the (possible) upload has occured
2. Wait in the correct GL context (the draw context)
Note: We don't add the GL sync meta to the input buffer as it's not
writable and a copy would be expensive.
Similar to the change with the same name for glimagesink
1. Set the sync point after the (possible) upload has occured
2. Wait in the correct GL context (the draw context)
Note: We don't add the GL sync meta to the input buffer as it's not
writable and a copy would be expensive.
