Whenever the surface is resized before the stream is negotiated, we endup
with an assertion in libgstvideo.
gst_video_center_rect: assertion 'src->h != 0' failed
This fixes it, by following the style aready in place, which is to ensure
surfaces have a minimum size of 1x1.
Fixes#1139
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3467>
gst-launch-1.0 audiotestsrc ! udpsink host=127.0.0.1
gst-launch-1.0 udpsrc ! audioconvert ! autoaudiosink
would crash with a floating point exception when clipping the input
buffer owing to a division by zero because no caps event was received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3469>
Make sure that group-id of a given play item are made consistent from the
start (sources) and all the way through the output.
This ensures that we can reliably detect that we have switched to the next play
item on the output of decodebin3 (and we can therefore properly free/release it)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When shutting down, we want to remove the urisourcebin blocking probes ... but
we also want to propagate a GST_FLOW_FLUSHING upstream (and not
GST_FLOW_NOT_LINKED) to make the upstream task gracefully stop instead of
posting an error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When `is_selection_done` is called, it checks that all the requested streams are
present in the active stream list ...
... except there could very well be a (about to be removed) stream from the
previous selection present.
Therefore filter the list of streams we add to the message by the streams which
are actually requested.
Fixes issues when switching between different stream types (ex: video-only to
audio-only).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
Currently, when rtspsrc property add-reference-timestamp-metadata=true,
a downstream rtph264depay element will attach multiple copies of the
same GstReferenceTimestampMeta to the depayloaded media buffers. This
can have signficant performance impacts further downstream in a pipeline
like the following:
rtspsrc add-reference-timestamp-metadata=true ! rtph264depay ! h264parse ! ... ! rtph264pay ! ...
For example, if there are 10 packet buffers for a frame of RTP H.264
video, each of those packet buffers will contain the same reference
timestamp meta. The rtph264depay element will then attach all 10
metadata to the depayloaded frame. And then later when we payload the
frame buffer again for proxying, we now have 10 more buffers each with
10 instance of the same metadata. Allocating/deallocating 100+ instances
of metadata @ 30fps for multiple streams has a pretty large performance
impact.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1578
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3431>
The tile width in pixel is not always available. Notably for
8L128 10bit format, the tile is 8x128 bytes, and the pixel
format is fully packed. That means that the tile contains at
least 6 pixels per line, but it also hold some bits of the
pixel from the same line on the previous or next tile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
In current tile representation, only tiles with power of two
width and height in bytes are supported. This limitation
prevents adding more complex tiles formats.
In this patch, we deprecate tile_ws and tile_hs from GstVideoFormatInfo and
replace if with an array of GstVideoTileInfo. Each plane tiles are then
described with their pixels width/height, line stride and total size.
The helper gst_video_format_info_get_tile_sizes() that depends on the
deprecated API is also being removed. This can simply be removed as it wasn't
in any stable release yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
Setting force_live lets aggregator behave as if it had at least one of
its sinks connected to a live source, which should let us get rid of the
fake live test source hack that is probably present in dozens of
applications by now.
+ Expose API for subclasses to set and get force_live
+ Expose force-live properties in GstVideoAggregator and GstAudioAggregator
+ Adds a simple test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3008>
This was the intention from the start, just took me a few years *cough* to
actually implement it properly.
Gapless is handled by re-using as much as possible the same decoders and sinks
if present, and only pre-rolling switching at the sources level (with buffering
if/when needed).
In order to enable "gapless" playback, the "next" uri should be set at any time
between the moment the `about-to-finish` signal is emitted and the moment the
current play item is done. Previously this could only be done with the signal
emission.
This new implementation also allows "Instantaneous URI switching". This allows a
much faster way of switching playback entries while re-using as many elements as
possible. To enable this set `instant-uri` property to TRUE, the default being
FALSE.
API: instant-uri properties
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
DecodebinInput (and their backing parsebin or identity) are no longer released
when the corresponding sinkpad is unlinked, but when it's released.
The parsebin element will be resetted:
* If incoming caps are incompatible (was the case before)
* Or when unlinking and it was previously pull-based
This opens the way to use decodebin3 with changing inputs (i.e. gapless)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
Introduce the option to have the streams be parsed with `parsebin` for
compatible sources (i.e. which are eligible for buffering in the same way as
before this commit).
By parsing the inputs directly, this allows more accurate buffering control:
* Instead of relying on potential bitrate information coming from somewhere
* and *without* being linked downstream
If `parse-streams` is activated and the stream is eligible for buffering, then a
`multiqueue` will be used on the output of `parsebin` in order to handle the
buffering.
API: `parse-streams`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
If the incoming streams are already parsed, there is no need to add yet-another
parsebin to process it *IF* that stream is compatible with a decoder or the
decodebin3 output caps.
This only applies if all the following conditions are met:
* The incoming stream can *NOT* do pull-based scheduling
* The incoming stream provides a `GstStream` and `GstStreamCollection`
* The caps are compatible with either the decodebin3 output caps or a decoder
input
If all those conditions are met, a identity element is used instead of a
parsebin element and the same code paths are taken.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
* Instead of creating temporary `PendingPad` structures, always create a
DecodebinInputStream for every pad of parsebin
* Remove never used `pending_stream` field from DecodebinInputStream
* When unblocking a given DecodebinInput (i.e. wrapping a parsebin), also make
sure that other parsebins from the same GstStreamCollection are unblocked
since they come from the same source
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
Make an explicit topology/tree of structures:
* ChildSrcPadInfo is created for each source element source pad
* ChildSrcPadInfo contains the chain of optional elements specific to that
pad (ex: typefind)
* A ChildSrcPadInfo links to one or more OutputSlot, which contain what is
specific to the output (i.e. optional buffering and ghostpad)
* No longer use GObject {set|get}_data() functions to store those structures and
instead make them explicit
* Pass those structures around explicitely in each function/callback
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
The following problem could happen:
* Thread 1 : urisourcebin gets activated from READY->PAUSED
* Thread 2 : some element causes a pad to be added to urisourcebin , which gets
linked downstream, which decides to activate upstream to pull-based.
* That requires "activating" the pads from PUSH to NONE, and then from NONE to PULL
* Thread 1 : the base class state change handlers checks if all pads are
activated
The issue is that since going form PUSH to PULL requires going through NONE,
there is a window during which:
* Thread 1 : The pad was set to NONE (before being set to PULL)
* Thread 2 : The base class activates that pad (to PUSH)
* Thread 1 : The attempt to "activate" to PULL fails (silently or not)
This is very racy, so in order to avoid that, we make sure that we only add pads
once the transition from READY->PAUSED in the parent classes is done.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
When a tile format is padded and imported as DMABuf, the stride
contains the information about the actual width and height in
number of tiles. This information is needed by the detiling shader
in order accuratly calculate the location of pixels. To fix that,
we also copy the offset and strides into the otuput format and
the converter will ensure that the shader is recompiled whenever
the stride changes.
This fixes video corruptions observed when decoding on MT8195
with videos that aren't not aligned to 64bytes in width.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3365>
GST_TRACERS="leaks" GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv
When running a pipeline like above, leaks are observed.
0:00:56.882419132 240637 0x5562c528ccc0 TRACE GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d20a0, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
0:00:56.882429131 240637 0x5562c528ccc0 TRACE GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d2be0, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
0:00:56.882437056 240637 0x5562c528ccc0 TRACE GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d3720, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
gst_element_release_request_pad does not unref the pad. It needs to
be followed by gst_object_unref. Doing that fixes the above leaks.
Use g_ptr_array_new_with_free_func with gst_object_unref as the free
function to unref the pad after release.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3177>
Posting latency messages causes a full and potentially expensive latency
recalculation of the pipeline. While subclasses should check whether the latency
really changed or not before calling this function, we ensure that we do not
post such messages if it didn't change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3282>
duplicate symbol '__invoke_on_main' in:
/Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstvulkan-1.0.a(cocoa_gstvkwindow_cocoa.m.o)
/Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstgl-1.0.a(cocoa_gstglwindow_cocoa.m.o)
ld: 1 duplicate symbol for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Also make the same change in iOS for consistency.
Continuation of https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1132
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3242>
When trying to build the plugin, GCC starts complaining about issues
with one of the cdparanoia headers and it block us from being able
to build the plugin with Werror.
The current warning in the header look like this:
```
[1/2] Compiling C object subprojects/gst-plugins-base/ext/cdparanoia/libgstcdparanoia.so.p/gstcdparanoiasrc.c.o
In file included from ../subprojects/gst-plugins-base/ext/cdparanoia/gstcdparanoiasrc.h:37,
from ../subprojects/gst-plugins-base/ext/cdparanoia/gstcdparanoiasrc.c:31:
/usr/include/cdda/cdda_interface.h:164:3: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
164 | "Success",
| ^~~~~~~~~
...
/usr/include/cdda/cdda_interface.h:163:14: warning: ‘strerror_tr’ defined but not used [-Wunused-variable]
163 | static char *strerror_tr[]={
| ^~~~~~~~~~~
[2/2] Linking target subprojects/gst-plugins-base/ext/cdparanoia/libgstcdparanoia.so
```
Last release of cdparanoia was in 2008, so our best bet for the
time is to ignore the warnings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2722>
This allows correct handling of wrapping around backwards during the
first wraparound period and avoids the infamous "Cannot unwrap, any
wrapping took place yet" error message.
It allows makes sure that for actual timestamp jumps a valid value is
returned instead of 0, which then allows the caller to handle it
properly. Not having this can have the caller see the same timestamp (0)
for a very long time, which for example can cause rtpjitterbuffer to
output the same timestamp for a very long time.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1500
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3202>
The scenario is what we try in the tests:
- we have a segment with .stop set
- some frame(s) flow
- we get a CAPS event
- we get an EOS (before getting buffers after the CAPS event)
in that case, without that patch, the segment is not properly closed
which is not correct. In this patch we keep track of previous caps until
a new buffer arrives, this way in that situation we set previous caps
again, and close the segment with the previous buffer.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1352
in this specific case
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3059>
The implementation was inconsistent between create and destroy. EGLImage
creation and destruction is requires for EGL 1.5 and up, while
otherwise the KHR version is only available if EGL_KHR_image_base
feature is set. Not doing these check may lead to getting a function
pointer to a stub, which is notably the case when using apitrace.
Fixes#1389
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2925>
Always hold a reference to the soft volume element
provided by the playsinkaudioconvert bin helper, the
same as when volume is provided by a sink element,
or the soft volume element gets unreffed too soon.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3108>
We need to call this to register the MusixBrainz tags before we use
them in an XMP schema.
Fixes this critical when attempting to run jpegparse on a JPEG
containing MusicBrainz XMP tags:
GStreamer-CRITICAL **: 20:41:07.885: gst_tag_get_type: assertion 'info != NULL' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3092>
The purpose of a deep buffer copy is to be able to release the source
buffer and all its dependencies. Attaching the parent buffer meta to
the newly created deep copy needlessly keeps holding a reference to the
parent buffer.
The issue this solves is the fact you need to allocate more
buffers, as you have free buffers being held for no reason. In the good
cases it will use more memory, in the bad case it will stall your
pipeline (since codecs often need a minimum number of buffers to
actually work).
Fixes#283
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2928>
Starting with Meson 0.62, meson automatically populates the variables
list in the pkgconfig file if you reference builtin directories in the
pkgconfig file (whether via a custom pkgconfig variable or elsewhere).
We need this, because ${prefix}/libexec is a hard-coded value which is
incorrect on, for example, Debian.
Bump requirement to 0.62, and remove version compares that retained
support for older Meson versions.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1245
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3061>
This allows users to let videorate fully fill the segments when received
EOS or on new segment, removing an arbitrary limit of 25 duplicates which
might not be what the user wants (for example on low FPS stream in GES,
that sometimes leaded to broken behavior)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3000>
when expose-all=False
When trying to find an decoder in that case, we loop over the different
decoder factories, and check that it outputs a format that matches the
requested one (through the :caps property), but if we find a decoder
that do match but later on some other don't we end up failing
autopluging. This patch ensures that we still plug the decoder that can
work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3011>
We are supposed to guarantee that pads that are exposed have the caps
set, but for sources that have pad with "all raw caps" templates, we end
up exposing pads that don't have caps set yet, which can break code (in
GES for example).
To avoid that we let uridecodebin plug a `decodebin` after such pads and
let decodebin to handle that for us. In the end the only thing that
decodebin does in those cases is to wait for pads to be ready and expose
them, after that `uridecodebin` will expose those pads.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3009>
GLib made the unfortunate decision to prevent libgobject from ever being
unloaded, which means that now any library which registers a static type
can't ever be unloaded either (and any library that depends on those,
ad nauseam).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/778>
Newer compilers ( clang 15 ) have turned stricter and errors out instead
of warning on implicit function declations
Fixes
gstssaparse.c:297:12: error: call to undeclared library function 'isspace' with type 'int (int)'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
while (isspace(*t))
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2879>
When a new segment event arrives, it immediately updates
the current stored segment, which was used for calculating
the running time of the current text buffer for every
passing video frame. This means a segment that arrives
after the text buffer might get used to (mis)calculate
the running times subsequently.
Instead, calculate and store the right running time
using the current segment when storing the buffer. Later
the stored segment can get freely updated.
This fixes the case where pieces of video and text streams
are seamlessly concatenated and fed through the text overlay.
Previously, it could lead to the current text buffer suddenly
have a massive running time and blocking all further input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2802>
This can be important for instance when a container holds multiple
tracks with the same media type, with no indication (eg tags) of
which track is the default one.
In that case, players usually pick the first track by default.
This is especially useful when using smart editing with GES, as
it will result in the same ordering as the input file that was
used as a template.
For reference, this yields the same order as ffprobe.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
when creating a profile from a discoverer info.
There is no justification for the existing code, and talking with
Thibault he cannot remember why the sort was in place.
On the other hand, this allows GES users to not have to implement
a callback for the select-tracks-for-object callback when using
it to trim a single clip, which the output profile was built from:
track elements will be placed in the appropriate track by default,
that is the one that will be connected to the matching profile.
For multi-clip timelines, the situation doesn't change, users will
still have to implement a callback and do the leg work of placing
track elements (if any) in a matching track (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
chroma-format, bit-depth-chroma, bit-depth-luma are all informative
fields set by the H265 and H265 parser upon receiving an SPS.
They shouldn't be constrained downstream of the parser, instead
if a user wants those to ultimately match certain values they
should do so by constraining a profile.
In this case however, we also always remove the profile constraint
in order to let encoders pick a suitable one as a function of the
raw input video format and their own capabilities.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.
In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.
Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.
We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.
Relevant upstream merge requests / issues:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
For formats which we don't have fast-path implementation, compositor
will convert it to common unpack formats (AYUV, ARGB, AYUV64 and ARGB64)
then blending will happen using the intermediate formats.
Finally blended image will be converted back to the selected output format
if required.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
It is entirely possible for the cancellable to be cancelled (and freed)
in gst_rtsp_connection_flush() while there may be an ongoing read/write
operation.
Nothing prevents gst_rtsp_connection_flush() from waiting for the
outstanding read/writes.
This could lead to a crash like (where cancellable has been freed
within gst_rtsp_connection_flush()):
#0 0x00007ffff4351096 in g_output_stream_writev (stream=stream@entry=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6af950, cancellable=cancellable@entry=0x7fff300288a0, error=error@entry=0x7ffe2c6af958) at ../subprojects/glib/gio/goutputstream.c:377
#1 0x00007ffff44b2c38 in writev_bytes (stream=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6afb90, block=block@entry=1, cancellable=0x7fff300288a0) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:1320
#2 0x00007ffff44b583e in gst_rtsp_connection_send_messages_usec (conn=0x7fff30001370, messages=messages@entry=0x7ffe2c6afcc0, n_messages=n_messages@entry=1, timeout=timeout@entry=3000000) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:2056
#3 0x00007ffff44d2669 in gst_rtsp_client_sink_connection_send_messages (sink=0x7fffac0192c0, timeout=3000000, n_messages=1, messages=0x7ffe2c6afcc0, conninfo=0x7fffac019610) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:1929
#4 gst_rtsp_client_sink_try_send (sink=sink@entry=0x7fffac0192c0, conninfo=conninfo@entry=0x7fffac019610, requests=requests@entry=0x7ffe2c6afcc0, n_requests=n_requests@entry=1, response=response@entry=0x0, code=code@entry=0x0) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:2845
#5 0x00007ffff44d3077 in do_send_data (buffer=0x7fff38075c60, channel=<optimized out>, context=0x7fffac042640) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:3896
#6 0x00007ffff4281cc6 in gst_rtsp_stream_transport_send_rtp (trans=trans@entry=0x7fff20061f80, buffer=<optimized out>) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream-transport.c:632
#7 0x00007ffff4278e9b in push_data (stream=0x7fff40019bf0, is_rtp=<optimized out>, buffer_list=0x0, buffer=<optimized out>, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2586
#8 check_transport_backlog (stream=0x7fff40019bf0, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2645
#9 0x00007ffff42793b3 in send_tcp_message (idx=<optimized out>, stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2741
#10 send_func (stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2776
#11 0x00007ffff7d59fad in g_thread_proxy (data=0x7fffbc062920) at ../subprojects/glib/glib/gthread.c:827
#12 0x00007ffff7a8ce2d in start_thread () from /lib64/libc.so.6
#13 0x00007ffff7b12620 in clone3 () from /lib64/libc.so.6
Fix by adding a cancellable lock and returning an extra reference used
across all read/write operations. gst_rtsp_connection_flush() can free
the in-use cancellable and it will no longer affect any in progress
read/write.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2799>
4x downscaling of chroma with co-sited chroma has never worked
it seems.
Fixes incorrect videotestsrc output and videoconvert conversions
to Y41B, YUV9, YVU9 and IYU9 with co-sited chroma.
e.g.
gst-launch-1.0 videotestsrc ! video/x-raw,format=Y41B,width=1280,height=720 ! \
videoconvert ! autovideosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2789>
SMPTE 170M and 240M use the same RGB and white point coordinates
and therefore both primaries can be considered functionally
equivalent.
Also, some transfer functions have different name but equal
gamma functions. Adding another colorimetry compare function
to deal with thoes cases at once
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765>
Raw memory upload should always be the least preferred input
caps, only added by the raw memory uploader as the last thing
in the caps.
Caps negotiation should still choose raw data when it needs to,
and other upload methods that can accept raw data buffers will still do so.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2725>
gst_video_convert_scale_get_fixed_format() receives 'othercaps' from
basetransforms' fixate_caps() vmethod which explicitly mentions that
'`othercaps` may not be writable'.
The gst_caps_intersect() call just before may or may not produce new
caps. Particularly in cases like EMPTY or ANY caps on either of the
inputs, only a ref is taken and returned to the caller.
As a result, gst_video_convert_scale_fixate_format() may have attempted
to modify a non-writable caps structure.
Fix by adding a gst_caps_make_writable().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2709>
There's no need to re-assign the return value of
g_string_append_*() functions and such to the variable
holding the GString. These return values are just for
convenience so function calls can be chained. The actual
GString pointer won't change, it's not a GList after all.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2685>
This reverts commit 6f9ae5d758.
The _transform_caps() function can't tell the difference
between the caller wanting to know the output caps
for the current method, or all possible output caps. If
it includes caps for all possible methods, glupload can
end up negotiating and sending the wrong output caps
downstream.
Partially reverts !2687Fixes#1310
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2699>
If no filter caps are provided with a caps query, always
generate a full set of all caps from all upload methods,
not just the configured one. This is needed to handle
renegotiation when dealing with raw sysmem caps - as the upload
method might accept raw sysmem caps, but only the raw data
uploader adds those to the caps query.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
This reverts commit f3292dc156.
Only the raw data uploader should add sysmem caps to the
actual caps query, because we want them to be at the
lowest priority. If upstream does select to send raw
caps, then the correct upload method will still
be chosen because the accept_caps implementation
will accept them
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
When checking if we need to reconfigure when uploading, check
specifically the output caps of the current method will
result in compatible/incompatible caps, not the full set
of output caps from all upload methods.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
Fixes warnings like:
Received a structure string that contains '="0.5"'. Reading as a gdouble value, rather than a string value. This is undesired behaviour, and with GStreamer 1.22 onward, this will be interpreted as a string value instead because it is wrapped in '"' quotes. If you want to guarantee this value is read as a string, before this change, use '=(string)"0.5"' instead. If you want to read in a gdouble value, leave its value unquoted.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2621>
Some encoders (e.g. Makito) have H265 field-based interlacing, but then
also specify an 1:2 pixel aspect ratio. That makes it kind-of work with
decoders that don't properly support field-based decoding, but makes us
end up with the wrong aspect ratio if we implement everything properly.
As a workaround, detect 1:2 pixel aspect ratio for field-based
interlacing, and check if making that 1:1 would make the new display
aspect ratio common. In that case, we override it with 1:1.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2577>
When collection is updated, decodebin3 exposes pad first and then
streams-selected message is posted.
The condition can cause a situation where playbin3 links non-existing
combiner/playsink pads (since streams-selected is not posted yet) with
new decodebin output pad. This commit will re-check selected/active
streams condition on pad-added and reconfigure output if needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2482>
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.
But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
It is valid to have the padding set to 1 on the first packet and it
happens very often from TWCC packets coming from libwebrtc. This means
that we were totally ignoring many TWCC packets.
Fix test that checked that a first packet with padding was not valid and
instead test a single twcc packet with padding to check precisely what
this patch was about.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2422>
Background:
Whenever a caps event is received by appsink, the caps are stored in the
same internal queue as buffers. Only when enough buffers have been
popped from the queue to reach the caps, `priv->sample` gets its caps
updated to match, so that they are correct for the following buffers.
Note that as far as upstream elements are concerned, the caps of appsink
are updated immediately when the CAPS event is sent. Samples pulled from
appsink retain the old caps until a later buffer -- one that was sent by
upstream elements after the new caps -- is pulled.
The race condition:
When a flush is received, appsink clears the entire internal queue. The
caps of `priv->sample` are not updated as part of this process, and
instead remain as those of the sample that was last pulled by the user.
This leaves open a race condition where:
1. Upstream sends a new caps event, and possibly some buffers for the
new caps.
2. Upstream sends a flush (possibly from a different thread).
3. Upstream sends a new buffer for the new caps. Since as far as
upstream is concerned, appsink caps are the new caps already, no new
CAPS event is sent.
4. The appsink user pulls a sample, having not pulled before enough
samples to reach the buffers sent in step 1.
Bug: the pulled sample has the old caps instead of the new caps.
Fixing the race condition:
To avoid this problem, when a buffer is received after a flush,
`priv->sample`'s caps should be updated with the current caps before the
buffer is added to the internal queue.
Interestingly, before this patch, appsink already had code for this, in
gst_app_sink_render_common():
/* queue holding caps event might have been FLUSHed,
* but caps state still present in pad caps */
if (G_UNLIKELY (!priv->last_caps &&
gst_pad_has_current_caps (GST_BASE_SINK_PAD (psink)))) {
priv->last_caps = gst_pad_get_current_caps (GST_BASE_SINK_PAD (psink));
gst_sample_set_caps (priv->sample, priv->last_caps);
GST_DEBUG_OBJECT (appsink, "activating pad caps %" GST_PTR_FORMAT,
priv->last_caps);
}
This code assumes `priv->last_caps` is reset when a flush is received,
which makes sense, but unfortunately, there was no code in the flush
code path resetting it.
This patch adds such code, therefore fixing the race condition. A unit
test demonstrating the bug and testing its behavior with the fix has
also been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2413>
gst_value_serialize() does more than what's needed to printf-ing
especially when given GValue is already string. Just print string
value as-is without gst_value_serialize() to avoid unreadable
string print, especially for multi-bytes character encoding cases.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2387>
* Remove fields no longer used, or that can be replaced by smaller code
* Rename "channels" to a more meaningful "input pads"
* Directly handle/use combiner pads in the combiners instead of on the playbin3
main structure
Remove the corresponding combiner sinkpad whenever a uridecodebin3 source pad
goes away
* If used, store the corresponding combiner sink pad in the SourcePad helper
structure
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2384>
As implemented, we only support OpenGL 3 API from version 3.2. Though, there
is no issue enabling GLSL 1.30 even if we are going to restrict our API usage
to 2. This allows using texelFetch() on OpenGL 3.0 and 3.1 drivers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
Since the addition of tiling format with subsampled tile size
(NV12_16L32S), getting the tile width/height shifts and tile
size have become more complex. Add a helper to extract and
scale this information for the selected plane and format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
The decision to store the input buffer depends on whether extensions
are to be added to the output buffer, I assume as an optimization.
This creates an issue for subclasses that call negotiate(), where
header_exts is actually populated, from their handle_buffer()
implementation: at chain time, no header extension has been negotiated
yet, which means that we don't add extensions to the first batch of
buffers that comes out.
Keep track of whether negotiate has been called (this is different
from the negotiated field) and always store the input buffer until
then. This fixes the issue while largely preserving the optimization.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2304>
Pipeline such as:
gst-launch-1.0 -vf videotestsrc ! video/x-raw,format=NV12,colorimetry=\(string\)bt709 \
! videoscale ! video/x-raw,format=I420 ! fakesink
Always trigger a error:
ERROR video-info video-info.c:556:gst_video_info_from_caps: no width property given
Because it is called before the fixate_size(), the src caps' resolution
may be absent or not fixed. That causes that the src video info can not
be created correctly and we can not inherit the colorimetry and chroma-site
from the input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2289>
Fixing this pipeline:
gst-launch-1.0 filesrc location=sample.png ! pngdec ! videorate ! fakesink
- videorate receives a single buffer with pts = 0, duration = invalid;
- then it receives eos triggering this buffer to be pushed downstream;
- the pushing code was assuming that a duration was set, which is
impossible as we received a single buffer and no output framerate was
set either. So the best we can do is to push the buffer without
duration.
Fix#1177
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2296>
GAP events flagged with MISSING_DATA are transformed into GAP buffers
flagged with CORRUPTED.
In these cases, it is preferable to simply keep rendering the previous
buffer (if there was one) instead of flashing the pad in and out of
view.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
Returning TRUE from the `transform_meta` function tells
GstBaseTransform to copy the meta into the new buffer. If videoscale
has already transformed a meta by scaling it, it should always return
FALSE to avoid duplicating the meta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1630>
Since d0133a2d11 "videoconvert: Allow
passthrough for ANY caps features" videoconvert will always claim that
it supports any kind of memory which is true in very specific case (when
it is running in passthrough mode). To get elements that autoplug
converters depending on the caps running in the pipeline (like
autovideoconvert), we need to have converters no lie about what they can
do when queried `accept_caps` or `query_caps`.
This still accepts any caps feature as before but it introduces
a restriction in the way we handle memory capsfeatures.
We keep previous behaviour in videoconvert and videoscale.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
Now that videoconvert and videoscale's are both based on
GstVideoConverter and are using the exact same code, it makes much more
sense to have one element doing the two operation, and it can be
more efficient in some cases (one single path for both operations).
This removes the `videoscale` and `videoconvert` plugins but keeps the element
but makes them also do both operations (adding some APIs to each element).
There is a small change in API for the `videoscale:dither` property which
was previously a totally unused boolean, it is now an enum and is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
The format of the caps fields is
ssrc-(SSRC_VALUE)-(ATTRIBUTE_NAME)=(ATTRIBUTE_VALUE)
.
Parsing of the attributes from the caps into the SDP is not implemented
as this depends not only a single stream's caps but on the whole rtpbin
configuration.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.
This seems to have also fixed some documentation issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
get_merged_collection() returns an owned stream collection and was
leaked in the else block.
Fix leak when running:
GST_TRACERS=leaks GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/954>
Make sure that the requested stream selection isn't identical to the current
one. If that's the case, just carry on as usual.
This avoids multiple `streams-selected` posting ... when the selection didn't
change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2185>
timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>
The documentation could be read to mean that the caller continuous to
'own' the buffer, and that there is some other mechanism to find out
when to unref it.
Clarify that "not taking ownership" here means "taking a reference",
and specify that you can unref it at any time after calling the
function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2110>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
The console HANDLE will be keep signalled state unless application
reads console input buffer immediately. So we should read and flush
console input buffer from the thread where the event is signalled,
instead of GMain context thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2058>
Configure playsink tried element with the bus of the main pipeline.
That tried element can be a gl video sink, which would benefit from being
able to propagate context messages to the main pipeline and have other
internal pipeline elements configured with it. Having different elements
configured with the same GL context allows them to share buffers with
video/x-raw(memory:GLMemory) caps and achieving zero-copy.
Thanks to Alicia Boya García <aboya@igalia.com> for her work co-debugging
the issue and contributing to find a solution.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2056>
Sources that can internally handle buffering shouldn't have yet-another
buffering element after it. This can be simply detected by checking if it can
answer a TIME BUFFERING query just after creation.
If that is the case, we can expose the element source pads directly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
Use the return value from gst_element_link_pads() and gst_bin_add()
Fixes:
../ext/gl/gstglmixerbin.c:305:12: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
gboolean res = TRUE;
^
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2038>
Add 5 new navigation event types for touchscreen events, with the same
naming and meaning as in libinput - touch-down, touch-motion, touch-up,
touch-frame and touch-cancel - as well as constructors and parse
functions for them.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Add a function to get x/y coordinates from suitable navigation events,
and one to create a copy with given coordinate values.
For e.g. translating event coordinates, this avoids having to either
switch on the event type to select the right parse function, or
having to rely on implementation details of the underlying event
structure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
This deprecates the current send_event interface, and the wrapper
functions based on it, replacing it with a send_event_simple interface and
wrapper function. Together with the new event constructors, this avoids
implementations having to directly access the underlying structure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
The default query handler would go through typefind, which by default accepts
any CAPS. But once configured, parsebin can't reconfigure itself, it should
therefore pass through the ACCEPT_CAPS query to the first element after
typefind (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
Don't reconfigure outputs when the select-streams
event is sent from the app, as the selection may
not take effect for some time. Instead, wait
for the pipeline to confirm the new set of
selected streams when it sends the message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
If we previously had subtitles coming in, the video
may be chained through a text overlay block. Before,
the code would end up trying to link pads that were
already linked and video would not get reconnected
properly.
To fix that, make sure that the candidate
pads are actually unlinked first. If a textoverlay
is present and no longer needed, it will be cleaned
up later in the reconfiguration sequence.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
Requesting a new pad can start a reconfiguration cycle, where
playsink will block all input pads and wait for data on them
before doing internal reconfiguration. If a pad is released,
that reconfiguration might never trigger because it's now waiting
for a pad that doesn't exist any more.
In that case, complete the reconfiguration on pad release.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1180>
Fix a small race where a group can receive stream-start
and post a pending buffering message just as another
thread posts a different buffering message, causing them
to be received by the application out of order. In the
worst case, this leads the application receiving a
stale 99% buffering message and going back to buffering
right after the 100% buffering message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1840>
As specified formally in RFC8851
Each rid description is placed in its own caps field in the structure.
This is very similar to the already existing extmap-$id sdp<->caps
transformations that already exists.
The mapping is as follows:
a=rid:0 direction ';'-separated params
where direction is either 'send' or 'recv'
gets put into a caps structure like so:
rid-0=(string)<"direction","param1","param2",etc>
If there are no rid parameters then the caps structure is generated to
only contain the direction as a single string like:
rid-0=(string)direction
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1760>
Remove the symbolic link `gst-uninstalled` which points to `gst-env`.
The `uninstalled` is the old name and the project should stick to a
single name for the procedure.
Remove the term from all the files, exceptions are variables from
dependencies like `uninstalled_variables` from pkgconfig and
`meson-uninstalled`.
Adjust mentions of the script in the documentation and README.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
Do not maintain similar build instructions within each gst-plugins-*
subproject and the subproject/gstreamer subproject. Use the build
instructions from the mono-repository and link to them via hyperlink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
While this is slightly more expensive (~48% slower per random number) it
does not cause any measurable difference when running through a complete
audio conversion pipeline.
On the other hand its random numbers are of much higher quality and on
spectrograms for 32 bit to 24 bit conversion the difference is clearly
visible.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1729>
The instant-rate value in the TrickMode enum is a
flag, but the other values are not. Move instant-rate
to the end of the enum and give it a value large enough
for it to be used without modifying the trick-mode
setting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1788>
They can't be used in any useful way. The type of every GstMemory is
always GST_TYPE_MEMORY and the subtyping relationship has to be
implemented on top of that via the associated allocator and mem_type
string.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1764>
This is a minimal unit test the show that the stride extrapolation can work
with all pixel format we support. This minimal verify that the extrapolation
match the stride we set into GstVideoInfo with 320x240 for all the pixel
format we support. The tiles formats are skipped, since their stride is
set as two 16bit integers, and we also skip over palette planes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
Many of the legacy APIs, specifically in the Linux Kernel, have a
single stride for the pictures. In this context, it is common
to extrapolate the other strides based on the selected pixel
format. Such function have been copy pasted from video4linux2
plugin into wayland, kms and v4l2codecs plugins.
This patch implements a generalized from of that function and
make it available to everyone through the video library.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
Unlike other simple tiled formats, the Mediatek HW use different tile size
per-plane. The tile size is scaled according to the subsampling. Effectively,
using the name 16L32S to represent linearly layout tiles of size 16x32 bytes
in the Y plane, and 16x16 in the UV plane. In order to make this specificity
discoverable, a new SUBTILES flags have been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
... instead of round(). Depending on framerate, calculated position
may not be clearly represented by using uint64, 30000/1001 for example.
Then the result of round() can be sliglhtly larger (1ns) than
buffer timestamp. And that will cause unnecessary frame delay.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1747>
If a serialized event arrives behind a buffer, it should not be send before
it. This fixes the pending event handling so that only early pending events,
the one that arrrived or was generated while the adapter was empty get send
before pushing buffer. All other events are not pushed after.
This issue lead the latency tracer to think our audio encoder did not have any
latency. This was testing with opusenc in a live pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1266>
For artificial input (in unit tests), all six bytes of
constraint_indicator_flags in hevc_caps_get_mime_codec() can be
zero. Add a guard against an out-of-bounds error that occurred in that
case. Change variables to signed int so comparison with -1 works.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1677>
... in order to make older g-i happy (~1.60) which doesn't like
freeform descriptions in the value_name field. Which in turn
then makes hotdoc happy instead of erroring out when we bump
the symbol index version.
We usually only (ab)use the name field for description strings
for private plugin enums, not for public API visible to bindings.
This lets glib-mkenum generate the _get_type() function for the
enum again, which in turn will generate the expected value names
to match the enums.
We might be able to add this back later once we can upgrade the
g-i version requirement (and the documentation job image).
This reverts most of commit b0aab48cdcf0a454d14aeb4d907209d8ee3f1add
There's a race condition in gsttagdemux.c between typefinding and the
end-of-stream event. If TYPE_FIND_MAX_SIZE is exceeded,
demux->priv->collect is set to NULL and an error is returned. However,
the end-of-stream event causes one last attempt at typefinding to occur.
This leads to gst_tag_demux_trim_buffer() being called with the NULL
demux->priv->collect buffer which it attempts to dereference, resulting
in a segfault.
The malicious MP3 can be created by:
printf "\x49\x44\x33\x04\x00\x00\x00\x00\x00\x00%s", \
"$(dd if=/dev/urandom bs=1K count=200)" > malicious.mp3
This creates a valid ID3 header which gets us as far as typefinding. The
crash can then be reproduced with the following pipeline:
gst-launch-1.0 -e filesrc location=malicious.mp3 ! queue ! decodebin ! audioconvert ! vorbisenc ! oggmux ! filesink location=malicious.ogg
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/967
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1620>
Hotdoc should be able to extract and parse comments out of these. Just
need to be careful to only add the glob in directories that actually
contain *.m (objc) and *.mm (objcpp) files.
Also fix some doc comments and remove redundant ones.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1614>
This is usually necessary to allow gst-indent to treat it as
a statement, but we do not run gst-indent on headers and we do not
have extra semicolons in other places that this macro is used in the
header. Fixes warnings when using the header:
```
In file included from gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/video.h:185,
from XYZ:9001:
gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/gstvideoaggregator.h:206:78: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
206 | G_DEFINE_AUTOPTR_CLEANUP_FUNC(GstVideoAggregatorConvertPad, gst_object_unref);
| ^
gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/gstvideoaggregator.h:214:181: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
214 | G_DECLARE_DERIVABLE_TYPE (GstVideoAggregatorParallelConvertPad, gst_video_aggregator_parallel_convert_pad, GST, VIDEO_AGGREGATOR_PARALLEL_CONVERT_PAD, GstVideoAggregatorConvertPad);
| ^
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1572>
The earlier size of 2 MB was set back in 2009, it doesn't
seem unreasonable to raise it to 8 MB these days. The use
case at hand is matroskademux containing both a video stream
with a very low amount of compression but no decoding latency,
and a H265 stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1538>
Sometimes we can't output anything because we don't have enough
incoming frames. In that case, the resampler was trying to call
do_quantize() and do_resample() in a loop forever because there would
never be samples to output (so chain->samples would always be NULL).
Fix this by not calling chain->make_func() in a loop -- seems
completely unnecessary since calling it over and over won't change
anything if the make_func() can't output samples.
Also add some checks for the input and / or output being NULL when
doing conversion or quantization. This will happen when we have
nothing to output.
We can't bail early, because we need resampler->samples_avail to be
updated in gst_audio_resampler_resample(), so we must call that and
no-op everything along the way.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1461>
BT.2020 color primaries are designed to cover much wider range of
CIE chromaticity than BT.709, and also it's used for both SDR and HDR
contents. So, the incorrect assumption (i.e., BT.709 as a BT.2020)
is risky and resulting image color tends to be visually very wrong.
Unless there's obvious clue, don't consider color space of high resolution
video stream as BT.2020
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1445>
The ["level-asymmetry-allowed"] field states that the peer wants the
profile specified in the "profile-level-id" fields but doesn't care
about the level. To express this in GStreamer caps term, we add a
"profile" field in the caps, which reuses the usual "profile" semantics
for H.264 streams and, and remove "profile-level-id" and
"level-asymmetry-allowed" fields.
["level-asymmetry-allowed"]: https://www.iana.org/assignments/media-types/video/H264
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1410>
There's a potential race condition with this sort of pipelines on
certain systems (depends on the processing load):
GST_DEBUG_DUMP_DOT_DIR=/tmp \
gst-launch-1.0 uridecodebin3 uri=file://stream.mp4 ! glupload ! \
glimagesink --gst-debug=*:4
Right after the pipeline passes from PAUSED to READY, bin_to_dot_file
dumps uridecodebin3 properties, but current uri and suburi might be
already freed, causing a potential use-after-freed.
This patch makes NULL the current item right after all the play items
are freed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1353>
Sometimes the resampler has enough space to store all the incoming
samples without outputting anything. When this happens,
gst_audio_resampler_get_out_frames() returns 0.
In that case, the resampler should consume samples and just return.
Otherwise, we get a segfault when gst_audio_resampler_resample() tries
to resample into a NULL 'out' pointer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1343>
If the pad does not have a current caps, get_pad() returns the query
caps which can be ANY. In such case the caps does not have any structure
resulting in a critical warning when calling gst_caps_get_structure().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1254>
... in favour of dep.get_variable('foo', ..) which in some
cases allows for further cleanups in future since we can
extract variables from pkg-config dependencies as well as
internal dependencies using this mechanism.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
Currently the extension data length specified in the RTP header would
say it was shorter then the data serialised to a packet. When
combining the resulting buffer, the underlying memory would still
contain the extra (now 0-filled) padding data.
This would mean that parsing the resulting RTP packet would potentially
start with a number of 0-filled bytes which many RTP formats are not
expecting.
Such usage is found by e.g. RTP header extension when allocating the
maximum buffer (which may be larger than the written size) and shrinking
to the required size the data once all the rtp header extension data has
been written.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1146>
Since commit a55dafe341, stream-scoped tags no
longer appeared as top-level tags, introducing a behaviour regression, specially
for MP3 files.
The `gst_discoverer_info_get_tags()` API now returns all tags detected for the
given media, as documented.
A new API is introduced to get container-specific tags,
`gst_discoverer_container_info_get_tags()`. The discoverer tool was adapted to
use it. `gst_discoverer_info_get_tags()` is now deprecated in favor of
`gst_discoverer_container_info_get_tags()` and
`gst_discoverer_stream_info_get_tags()`.
Fixes#759
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1107>
For monorepo build and ugly/bad, for advanced feature
option API like get_option('xyz').required(..) which
we use in combination with the 'gpl' option.
For rest of modules for consistency (people will likely
use newer features based on the top-level requirement).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1084>
In the encoded streams we might not have all the information about the
raw video stream, but when reencoding they end up being specified, even
if those are default values.
As vp8 decoders always output frames in some YUV color space we can
ensure that when upstream doesn't specify any value in its caps we
use the default one which is what we end up doing when decoding/reencoding
anyway, so this way downstream (matroskamux in that case) doesn't need
to be able to renegotiate (which it doesn't).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1062>
Introduces a `libraries` variable that contains all libraries in a
list with the following format:
``` meson
libraries = [
[pkg_name, {
'lib': library_object
'gir': [ {full gir definition in a dict } ]
],
....
]
```
It therefore refactors the way we build the gir so that we can reuse the
same information to build them against 'gstreamer-full' in gst-build
when linking statically
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1093>
Retrieving the pad template caps from a ghost pad returns ANY which when
merged with any other caps will return ANY. ANY is not very specific
and may cause suboptimal code paths in e.g. decoders that assume the
lowest common denominator when presented with ANY caps.
Fixes negotiating dma-buf with vaapidecodebin between glupload in the
video sink element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1144>
Actually extract the .o objects from the convience libraries and put
them into the main one. Without this, they will just be referenced by
the .pc file, but it will be unusable because they are not installed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1122>
If the USE_PLAYBIN3=1 env var is set, we want to replace
playbin with playbin3, but separate to that, we always
want to register the 'playbin3' element so that applications
which explicitly use playbin3 work regardless of the env var.
This fixes `USE_PLAYBIN3=1 gst-validate-launcher`, for example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1102>
Change locking around group deactivation to avoid deadlocks
when shutting down exactly as a buffering message arrives.
The PLAYBIN3_LOCK now protects the active field of the
source group. Everything else is still protected by the
source-group-lock.
Also properly protect group switching operations with
the PLAYBIN3_LOCK everywhere.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1049>
Since the base class now does the parsing, there is no need
to reproduce that code in all the subclasses, just pass the attributes
which are the only relevant bit anyway.
Also, only store the direction if the subclass accepted the caps
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/906>
If we are not receiving a sync-point for a very long time, we need to
keep asking for them. The request-sync-point logic keeps track of how
many keyunitrequests we are allowed to send, but that would not matter
if we don't keep asking.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/930>