A previous fix, a275e1e029, is correct but was too
permissive since it treats all un-matched NAL units the same as AU delimiters
even though some other NAL unit types can be encountered in the processing loop.
The problem this can cause is that some hardware decoders experience bad
performance when handling FD units that precede the SPS.
This change restores the original behavior for FDs so that they're ignored until
the SPS is received and it preserves the codec conformance test gains that the
fix has achieved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7166>
According to https://w3c.github.io/webrtc-pc/#set-the-session-description
(steps in 4.6.10.), we should be creating and associating transceivers when
setting session descriptions.
Before this commit, webrtcbin deviated from the spec:
1. Transceivers from sink pads where created when the sink pad was
requested, but not associated after setting local description, only
when signaling is STABLE.
2. Transceivers from remote offers were not created after applying the
the remote description, only when the answer is created, and were then
only associated once signaling is STABLE.
This commit makes webrtcbin follow the spec more closely with regards to
timing of transceivers creation and association.
A unit test is added, checking that the transceivers are created and
associated after every session description is set.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7156>
If a downstream buffer pool is offered, vulkanupload checks its allocation
parameters to honor them. Only adds to usage the TRANSFER bits, which are
required to upload buffers.
Also, fail if the buffer pool cannot be configured with the current parameters.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7219>
Now that driver version is expected to be equal or superior to 1.3.275 the bug
in NVIDIA and RADV regarding usage is solved, we can revert commit b7ded81f7b.
Also this patch sets the internal usage variable after all the validation are
run, thus the state don't keep an invalid usage.
Finally, the now unused supported_usage variable is dropped.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7247>
Virtual method set_config() can be called several times, and if the number of
profiles counter isn't reset the pool will reach an error state.
The purpose of number of profiles is to check the number of valid vulkan video
profiles (two in the case of transcoding use-case, for example) so it's local to
set_config() virtual method.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7247>
Fixing warnings
GStreamer-CRITICAL **: 01:21:25.862: gst_value_set_int_range_step:
assertion 'start < end' failed
Although when QSV runtime reports a codec is supported, resolution query
fails sometimes, espeically VP9 encoder case on Windows.
Don't try to register an element if resolution query returned an error
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7250>
A fence configured in GstD3D12Memory should be used only for
write access to be completed. And because d3d12 -> d3d11 copy path
is read access to d3d12 resource, we should not set fence to
memory. Otherwise another read access to the d3d12 resource
will wait for d3d11 device context's copy operation although
simultaneous read access is allowed.
Use background thread to keep d3d12 resource and wait for d3d11 device's
copy operation instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7243>
When configured in constant bitrate mode, the muxer computes timing information
using the configured bitrate and the byte counter (now = bytes sent / byterate).
When an application changes the bitrate in CBR mode during playback, the
relationship between bytes sent and bitrate is no longer valid so new timing
values will be off by the ratio of the old bitrate to the new bitrate.
Furthermore, it will upset the way that padding is generated.
pad_stream() works by trying to fit the byte counter to now * byterate.
The result is that when decreasing bitrate, the muxer stalls, waiting until the
byte counter is in agreement with now * byterate. Also, when increasing
bitrate, the padding will spike in volume until the byte counter fits with
now * byterate.
If the byte counter is scaled by the ratio of new bitrate / old bitrate when
adjusting bitrate, then padding is generated in a way that applications would
more likely expect.
One detail this change doesn't yet address is whether the next PCR will match up
optimally with the previous PCR right after the byte counter is scaled. In that
case, some correction may be necessary. Also, perhaps the user should be
prevented from changing from bitrate=0 to bitrate=nonzero during playback since
it's not straightforward how to scale the byte counter in that case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7158>
This is to avoid a regression in validation layer (introduced by commit
916c4e70cd) when using vulkandownload
VUID-VkImageMemoryBarrier2-srcAccessMask-03914 .. vkCmdPipelineBarrier2():
pDependencyInfo->pImageMemoryBarriers[1].srcAccessMask (VK_ACCESS_TRANSFER_READ_BIT)
is not supported by stage mask (VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR)
since vulkandownload set DPB memories' access mask to
VK_ACCESS_TRANSFER_READ_BIT, while they are retain by the DPB queue, so when
they are used as DPB after been shown, this validation error is raised.
Must of the barrier values are set ignoring the previous state of the vulkan
images.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7211>
None of the symbols in webrtc-audio-coding-1 are marked with
`__declspec(dllexport)`, rendering the library usable only if
it was built with GCC/Clang.
The only fix available (as the pulseaudio copy has not been updated
with Google's upstream) is to ensure the fallback builds statically.
Although this change will also affect webrtcdsp's dependency on
webrtc-audio-processing-1, it does not break its compilation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6407>
The access flags are kept around the operations, but when the buffer is
released, the access flag should be reset to its original value, since queue
transfers can be done along the pipeline and, when reusing the buffer, the new
queue might not support the latest access flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7165>
Instead of dragging the last destination pipeline stage as current barrier
source pipeline stage (which isn't a valid semantic) this patch adds a parameter
to gst_vulkan_operation_add_frame_barrier() to set the source pipeline stage to
define the barrier.
The previous logic brought problems particularly with queue transfers, when the
new queue doesn't support the stage set during a previous operation in a
different queue.
Now the operation API is closer to Vulkan semantics.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7165>
Doing so resets the stride from the VideoMeta and it wasn't done before
the commit below. While on it, drop the plane size check as we can't
reliably predict the correct size when using DRM modifiers.
Fixes: 89b0a6fa23 ("va: refactor buffer import")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7187>
null event NT handle to ID3D12Fence::SetEventOnCompletion()
will block the calling CPU thread already, thus it has no point that
creating an event NT handle in order to immediate wait for fence at CPU-side.
Note that passing a valid event NT handle to the fence API might be useful
when we need to wait for the fence value later (or timeout is required),
or want to wait for multiple fences at once via WaitForMultipleObjects().
But it's not a considered use case for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7176>
GstD3D12Window.priv.input_info is referenced by mouse event handler
in order to calculate corresponding original position
if scene is rotated/flipped by the videosink.
Fixing regression introduced by recent d3d12videosink refactoring
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7177>
The driver - AKA intel-vaapi-driver - has been unmaintained for four years
now and encoding appears to be broken in various cases. As it's unlikely
that the situation will improve, blocklist the driver for encoding.
Decoding appears to be stable enough to keep it enabled.
The driver can still be used by setting the `GST_VA_ALL_DRIVERS` env
variable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7170>
The driver frame counters (processed, dropped, buffer level) are not
always correct apparently, and don't allow reliably assigning a frame
number to captured frames.
Instead of relying on them, count the number of frames directly here and
detect dropped frames based on the capture times of the frames: if more
than 1.75 frame durations are between two frames, then there must've
been a dropped frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7163>
Define a default usage and use it instead of repeating the same bitwise
addition.
Therefore, when usage is defined as zero, the usage is defined with the
format's supported usage and the default usage, now without the storage
bit, but with color and input attachment bits.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6798>
If a d3d12 memory holds non-direct-queue fence but the fence was
created with D3D12_FENCE_FLAG_SHARED flag, use the fence instead of
waiting for fence at CPU side. Note that d3d12ipcsrc or
d3d12screencapture elements will hold such sharable fence.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7139>
This needs significant work to use the new Metal→Vulkan integration
extension `VK_EXT_metal_objects`
```
MoltenVK/mvk_deprecated_api.h:132:1: note: 'vkGetMTLDeviceMVK' has been explicitly marked deprecated here
MVK_DEPRECATED_USE_MTL_OBJS
^
MoltenVK/mvk_deprecated_api.h:74:52: note: expanded from macro 'MVK_DEPRECATED_USE_MTL_OBJS'
#define MVK_DEPRECATED_USE_MTL_OBJS VKAPI_ATTR [[deprecated("Use the VK_EXT_metal_objects extension instead.")]]
^
../sys/applemedia/videotexturecache-vulkan.mm:303:20: error: 'vkSetMTLTextureMVK' is deprecated:
Use the VK_EXT_metal_objects extension instead.
VkResult err = vkSetMTLTextureMVK (memory->vulkan_mem.image, texture);
^
MoltenVK/mvk_deprecated_api.h:151:1: note: 'vkSetMTLTextureMVK' has been explicitly marked deprecated here
MVK_DEPRECATED_USE_MTL_OBJS
^
MoltenVK/mvk_deprecated_api.h:74:52: note: expanded from macro 'MVK_DEPRECATED_USE_MTL_OBJS'
#define MVK_DEPRECATED_USE_MTL_OBJS VKAPI_ATTR [[deprecated("Use the VK_EXT_metal_objects extension instead.")]]
^
2 errors generated.
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7091>
With clang on macOS:
```
error: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long')
...
error: format specifies type 'unsigned long' but the argument has type 'VkImageView' (aka 'unsigned long long')
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7091>
When building for iOS in Cerbero, as of MoltenVK SDK 1.3.283, we have
to statically link to libMoltenVK since it no longer ships a dylib.
This requires linking to libc++, so we find the dep with the objc++
compiler to ensure that meson uses the right linker.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7091>
since the encoded output is changing based on version
it does not make sense to check the output bitstream with a fixed
bytearray since the version in the target might vary. So sticking
to checking the number of output buffers and encoded frame size
similar to the other tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7141>
The code is simplified by using GQuarks for looking for caps features, and
removing inner loops.
Also, it's used the pad template caps to compare with the incoming caps because
is cheaper at the beginning of negotiation, where the pad template caps is used.
And, since the ANY caps where removed, there's no need to check for an initial
intersection.
Finally, the completion of caps features is done through a loop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6698>
The ANY caps in pad template caps seems to mess up the DMA negotiation.
The command of:
GST_GL_API=opengl gst-launch-1.0 -vf videotestsrc ! video/x-raw,format=NV12 !
vapostproc ! "video/x-raw(memory:DMABuf)" ! glimagesink
fails to negotiate, but in fact, the vapostproc can convert the input NV12
formant into the RGBA format to render.
The ANY may help the passthough mode, but we should make the negotiate correct
first.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6698>
After signal recovery the capture times for the next frames are simply
wrong. Experimentally this affected 2-3 frames and seemed to be related
to the buffer fill level after signal recovery, so drop at least 5
frames and up to fill level + 1 frames in this situation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7106>
Since a buffer resource will occupy at least 64KB,
allocating upload resource per decoding command might not be
an optimal approach. Instead, use sub-region of a upload resource
for multiple decoding command if sub-regions are not overlapped
each other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7108>
- Align `glib_debug`, `glib_assert` and `glib_checks` options with GLib,
otherwise glib subproject won't inherit their value. Previous names
and values are preserved using Meson's deprecation mechanism.
- Add `extra-checks` and `benchmarks` options in the main project so it
can be inherited in GStreamer subprojects.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1165>
When enable parallel encoding, it is possible that the unshown frame
is not output but it is already be marked as a repeated frame header.
So we need to use a dedicated buffer to hold the repeat frame header,
don't mix it with the orignal frame data.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6867>
Schedule (semi-)static resource upload at converter creation time.
And use single resource for all vertex, index, and constant
buffers, since separate resources will waste GPU memory.
Note that size and address of a committed resource are 64K aligned
even if requested buffer size is small.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7081>
