First, use top_builddir, otherwise it fails in out-of-source builds.
Second, link to the libtool archive directly to let make understand
the dependency.
This no longer does anything, and it was marked as CONSTRUCT_ONLY
which means someone would really have to go out of their way to
be able to set this, which would only be done in very custom
scenarios, if ever, and those will likely target a specific
version of GStreamer then, so probably not much point keeping
it deprecated for a while before removing it.
The Onvif Streaming Specification specifies that the NTP timestamps
in the Onvif extension header indicaes the absolute UTC time associated
with the access unit. But by using running time we can not achieve that,
since a frame's running time depends on the played interval, whether a
non-flushing is done, etc. Instead we have to use the stream time.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
It is now possible to update the currently used ntp-offset with a
custom serialized downstream event. The element will read the ntp-offset
property when doing the state transition from READY to PAUSED and
use that offset until it receives a "GstNtpOffset" event, which also
has a "ntp-offset" attribute in that it's structure. In case the
property is not set and no event has been received, the element will
guess the npt-offset with help of the clock. If no clock can be
retrieved, the element will error out and stop the data flow.
The same event is also used for updating the D/E-bits in the RTP
extension header. The discont flag in a buffer can be set whenver a
live/network source looses a frame, but that is not the type of
discontinuity that the onvif extension header should reflect. The
header is mainly used for playback of a track concept, in which
gaps can be present, and it's those kind of gaps that should be
highlighted with the D- and E-bits.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
If a buffer or a buffer list is cached, no events serialized with the
data stream should get through. The cached buffers and events should
be purged when we stop flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
Split the unit tests for rtponviftimestamp and rtponvifparse
elements in separate files.
Setup and cleanup the element and pads in fixures. Make the tests work
with CK_FORK=no as well, by cleaning up the 'buffers' list when needed.
Make unit tests work when run in valgrind by unreffing all buffers,
and by not allocating any payload in RTP buffers. Since we're not
doing anything with the payload part, but we're memcmp-aring the
complete buffer memory, valgrind complained about non-initialized
memory being used.
https://bugzilla.gnome.org/show_bug.cgi?id=757688
The standard does not seem to make any particular explicit not
implicit reference to the signedness of durations, and the code
does not rely on such, nor on the negativity of the -1 value
that's used as a placeholder when a duration property is not
present in the XML.
https://bugzilla.gnome.org/show_bug.cgi?id=750847
According to the standard:
"SegmentBase, SegmentTemplate and SegmentList shall inherit
attributes and elements from the same element on a higher level.
If the same attribute or element is present on both levels,
the one on the lower level shall take precedence over the one
on the higher level."
gst_mpdparser_parse_segment_list_node will now discard any inherited
segment URLs if the parsed element defines some too.
https://bugzilla.gnome.org/show_bug.cgi?id=751832
Add the various tokens/strings for the differnet texture types (2D, rect, oes)
Changes the GLmemory api to include the GstGLTextureTarget in all relevant
functions.
Update the relevant caps/templates for 2D only textures.
Created a unit test for dashdemux. It relies on a fake SOUP HTTP src plugin
that will feed data to dashdemux. The test controls the data to be
generated and checks the correct data was received for each expected
stream.
https://bugzilla.gnome.org/show_bug.cgi?id=756322
If MPD@suggestedPresentationDelay is not present in the manifest,
dashdemux selects the fragment closest to the most recently generated
fragment. This causes a playback issue because this choice does not allow
the DASH client to build up any buffer of downloaded fragments without
pausing playback. This is because by definition new fragments appear on
the server in real-time (e.g. if segment duration is 4 seconds, a new
fragment will appear on the server every 4 seconds). If the starting
playback position was n*segmentDuration seconds behind "now", the DASH
client could download up to 'n' fragments faster than realtime before it
reached the point where it needed to wait for fragments to appear on the
server.
The MPD@suggestedPresentationDelay attribute allows a content publisher
to provide a suggested starting position that is behind the current
"live" position.
If the MPD@suggestedPresentationDelay attribute is not present, provide
a suitable default value as a property of the dashdemux element. To
allow the default presentation delay to be specified either using
fragments or seconds, the property is a string that contains a number
and a unit (e.g. "10 seconds", "4 fragments", "2500ms").
Corrected the parsing of a segment template string.
Added unit tests to test the segment template parsing.
All reported problems are now correctly handled.
https://bugzilla.gnome.org/show_bug.cgi?id=751735
When building the media segment list using a SegmentList node, the
gst_mpd_client_setup_representation function will iterate through the
list of S nodes and will expect to find a matching SegmentUrl node. If
one does not exist, the code made an illegal memory access.
https://bugzilla.gnome.org/show_bug.cgi?id=752496
One may not have an GstGLContext available or current in the thread where one
would need to update the shader. Support this by signalling create-shader
whenever the one-shot 'update-shader' is set to TRUE.
Implemented with videotestsrc ! glshader ! glupload ! gtkglsink
Errors on an invalid shader compilation are ignored however any error
provided by the glsl compiler is printed to stdout.
A GstGLShader is now simply a collection of stages that are
compiled and linked together into a program. The uniform/attribute
interface has remained the same.
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753854
While creating caps in audiointerleave tests, bitmask is being set as 0x9
This is resulting in segmentation fault. Fix the same by typecasting to guint64
https://bugzilla.gnome.org/show_bug.cgi?id=755840
The obscured check in compositor was using the dimensions of the pad to clamp
the h/w of the pad instead of the output resolution, and was doing an incorrect
calculation to do so. Fix that by simplifying the whole calculation by using
corner coordinates. Also add a test for this bug which fell through the cracks,
and just skip all the obscured tests if the pad's alpha is 0.0.
https://bugzilla.gnome.org/show_bug.cgi?id=754107
The test_playlist_with_doubles_duration() test fails on some platforms
due to rounding errors that occur when m3u8.c converts from the floating
point value in the HLS manifest to a GstClockTime.
Using assert_equals_float() fixes this because this function handles
the rounding error issues by accepting almost equal.
https://bugzilla.gnome.org/show_bug.cgi?id=753881
Previous patch did not handle the case where an encoding (e.g. UTF-8) is
specified in the <xml ?> element. Added an extra test for with and without
encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=753813
Instead of checking for the gstreamer-video-1.0 package is installed,
just assume it is since we already check for the -base dependency.
With this replace the GST_VIDEO_* variables in makefiles and directly
link with libgstvideo.
https://bugzilla.gnome.org/show_bug.cgi?id=753820
When running on an STB, the function
gst_mpdparser_get_xml_node_as_string causes a segmentation fault. This
code works correctly on a Linux desktop.
Looking at the libxml documentation, the xmlNodeDump is deprecated.
Replacing the use of xmlNodeDump with xmlNodeDumpOutput fixes the
segfault on the STB and removes the use of the deprecated function.
Unless the DASH client can compensate for the difference between its
clock and the clock used by the server, the client might request
fragments that either not yet on the server or fragments that have
already been expired from the server. This is an issue because these
requests can propagate all the way back to the origin
ISO/IEC 23009-1:2014/Amd 1 [PDAM1] defines a new UTCTiming element to allow
a DASH client to track the clock used by the server generating the
DASH stream. Multiple UTCTiming elements might be present, to indicate
support for multiple methods of UTC time gathering. Each element can
contain a white space separated list of URLs that can be contacted
to discover the UTC time from the server's perspective.
This commit provides parsing of UTCTiming elements, unit tests of this
parsing and a function to poll a time server. This function
supports the following methods:
urn:mpeg:dash:utc:ntp:2014
urn:mpeg:dash:utc:http-xsdate:2014
urn:mpeg:dash:utc:http-iso:2014
urn:mpeg:dash:utc:http-ntp:2014
The manifest update task is used to poll the clock time server,
to save having to create a new thread.
When choosing the starting fragment number and when waiting for a
fragment to become available, the difference between the server's idea
of UTC and the client's idea of UTC is taken into account. For example,
if the server's time is behind the client's idea of UTC, we wait for
longer before requesting a fragment
[PDAM1]: http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=66068
dashdemux: support NTP time servers in UTCTiming elements
Use the gst_ntp_clock to support the use of an NTP server.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
The variables to store face values are only needed if they will be used to
control the volume. Which isn't the default to avoid potentially being very
loud accidentally. Only create variables when needed.
This other type of baseURL test was replaced by a more complex one,
better have both to keep both options working
Also adds another 2 variations of how baseURL can be generated
https://bugzilla.gnome.org/show_bug.cgi?id=752776
gst_gl_memory_setup_wrapped() now takes a destroy notify function. This
destroy notify is called to track the memory life time, hence will
notify each time a memory get destroyed. This test check that the
callback count is correct.
We need to sync the pad values before taking the aggregator and pad locks
otherwise the element will just deadlock if there's any property changes
scheduled using GstController since that involves taking the aggregator and pad
locks.
Also add a test for this.
https://bugzilla.gnome.org/show_bug.cgi?id=749574
They require to get_proc_address some functions through the
platform specific {glX,egl}GetProcAddress rather than the default
GL library symbol lookup.
The previous approach of traversing the other_context weak ref tree was
1. Less performant
2. Incorrect for context destruction removing a link in the tree
Example of 2:
c1 = context_create (NULL)
c2 = context_create (c1)
c3 = context_create (c2)
context_can_share (c1, c3) == TRUE
context_destroy (c2)
unref (c2)
context_can_share (c1, c3) returns FALSE when it should be TRUE!
This does not remove the restriction that context sharedness can only
be tracked between GstGLContext's.
Very much in the same spirit as the Gtk GL sink
Two things are provided
1. A QQuickItem subclass that renders out RGBA filled GstGLMemory
buffers that is instantiated from qml.
2. A sink element that will push buffers into (1)
To use
1. Declare the GstGLVideoItem in qml with an appropriate
objectName property set.
2. Get the aforementioned GstGLVideoItem from qml using something like
QQmlApplicationEngine engine;
engine.load(QUrl(QStringLiteral("qrc:/main.qml")));
QObject *rootObject = engine.rootObjects().first();
QQuickItem *videoItem = rootObject->findChild<QQuickItem *> ("videoItem");
3. Set the videoItem on the sink
https://bugzilla.gnome.org/show_bug.cgi?id=752185
Added unit tests for all functions. Code coverage:
Overall coverage rate:
lines......: 83.8% (1941 of 2316 lines)
functions..: 100.0% (141 of 141 functions)
flexelint (http://www.gimpel.com/html/flex.htm) static code analyser
complained about implicit conversions from unsigned to signed, so I added
explicit conversions.
Ideally, the size parameter of gst_mpd_parse function should be unsigned,
but I don't want to change the API.
The duration_to_ms function converts a time specified by year, month, day,
hour, minute, second, millisecond to a millisecond value. Because all the
arguments are positive numbers, the result must also be positive.
This patch changes the returned value from a gint64 to a guint64 type.
Improved dash_mpd unit tests by adding new tests that parse the Period element.
Code coverage reported by lcov for dash/gstmpdparser.c is:
lines......: 43.0% (985 of 2290 lines)
functions..: 47.5% (67 of 141 functions)
According to ISO/IEC 23009-1:2014(E), chapter 5.3.2.1
"The Period extends until the PeriodStart of the next Period, or until
the end of the Media Presentation in the case of the last Period."
This means that a configured value for optional attribute period duration
should be ignored if the next period contains a start attribute or it is
the last period and the MPD contains a mediaPresentationDuration attribute.
https://bugzilla.gnome.org/show_bug.cgi?id=750797
The gst_mpdparser_get_rep_idx_with_max_bandwidth function assumes
representations are ordered by bandwidth and incorrectly returns the
first one when wanting the one with minimum bandwidth.
Corrected gst_mpdparser_get_rep_idx_with_max_bandwidth function to get the
correct representation in case max_bandwidth parameter is 0.
https://bugzilla.gnome.org/show_bug.cgi?id=751153
Added a check for a_node->ns before accessing a_node->ns->href in
gst_mpdparser_get_xml_node_namespace. This could happen if the xml
is missing the default namespace.
https://bugzilla.gnome.org/show_bug.cgi?id=750866
An example app that takes video URIs as command line arguments and switches
between them seamlessly one after the other using compositor and audiomixer.
Both audio-video and video-only media files are valid inputs, but mixing files
of both types in a single invocation is cumbersome to support, and hence does
not work. The example attempts to keep the audio stream moving along perfectly,
and duplicates video frames where necessary to cover gaps in the video
timestamps using the 'ignore-eos' videoaggregator pad property.
Ensuring seamless (and mostly-glitch-free) switching is harder than it sounds,
and hence the example contains plenty of pad probes and running time
calculations to make things work.
The GPtrArray play_queue contains items that are being played back, have been
prepared for playback, and will be played back in the future. The queue itself
is mutable besides the first two items (playing and prepared). The item that has
been prepared should not be edited or removed since it has been prepared in
advance to be activated immediately on the current item's EOS.
The example also has support for switching to the next item in the queue
prematurely; see the --switch-after/-s flag to the application.
Note: the output video is hard-coded at 1280x720, and input video is scaled as
needed to fit this size. Set OUTPUT_VIDEO_WIDTH/HEIGHT to change this.
https://bugzilla.gnome.org/show_bug.cgi?id=748947
When the 'ignore-eos' property is set on a pad, compositor will keep resending
the last buffer on the pad till the pad is unlinked. We count the buffers
received on appsink, and if it's more than the buffers sent by videotestsrc, the
test passes.
g_object_get() returns a ref, gtk_container_add() only ref_sink().
That mean we still need to unref afterward. This leak was hiding
a reference bug previously present.
Lets not cram everything into a single test - this would render the test name
useless for quick diagnosis. Having separate tests for the optional feature is
also verifying the behaviour when the feature is off.
Rather than one of the input pad video info's.
The test checking this was not constraining the output frame size
to ensure that the out of frame stream was not being displayed.
We verify that all the buffers on an obscured sinkpad are skipped by overriding
the map() function in the GstVideoMeta of the buffers to set a variable when
called. We also test that the buffers do get mapped when they're not obscured.
Blame^WCredit for the GstVideoMeta map() idea goes to Tim.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
If 95% of the code of an example app consists of GObject
code, maybe that's defeating the point a little. So just
remove a lot of that and trim down the example to the
absolute minimum. Also removes the last remaining GPL3
licensed code in -bad.
GstPhotography enables new paths in wrappercamerabinsrc that allows
the source to be notified about the capture caps and provide an
alternative caps if desired bypassing the negotiation (this doesn't
seem like a good idea these days). To make sure it keeps working
until we remove it from the API in favor of standard caps negotiation
features this test was added.
It adds 3 extra tests with a simple test source that will:
1) Test that capturing with ANY caps work
2) Test that capturing with a fixed caps work
3) Test that capturing with a fixed caps and having the source
pick a different resolution from GstPhotography API works
by having wrappercamerabinsrc crop the capture to the final
requested dimensions
A bitmask is 64 bits, but integer immediates are passed as int
in varargs, which happen to be 32 bit with high probability.
This triggered a valgrind jump-relies-on-uninitalized-value
report well away from the site, since it doesn't trigger on
stack accesses, and there must have been enough zeroes to stop
g_object_set at the right place.
The first output MPEG-TS packet that corresponds to a video input
buffer which had the delta flag cleared (i.e. was a keyframe)
should have the delta flag cleared as well.
This is needed e.g. by tcpserversink in order to keep track
of the last keyframe and be able to burst data to newly-
connected clients.
https://bugzilla.gnome.org/show_bug.cgi?id=706872
This reverts commit 1c77d12ce8.
"interlaced" in the caps don't mean the same thing as the SOF2 marker in the
JPEG format. This test passes because of broken behaviour.
The flush stop could have happened between the source trying
to push the segment event and the buffer, this would cause a warning.
Prevent that by taking the source's stream lock while flushing.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
With the current audiomixer, the input caps need to be the same,
otherwise there is an unavoidable race in the caps negotiation. So
enforce that using capsfilters
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Get rid of now-useless packetizer struct and just
call internal functions directly. Also remove
version property which is now defunct, not least
because we create the packetizer with the
version in the init function before a version
can be set.
When this is TRUE, we really have to produce output. This happens
in live mixing mode when we have to output something for the current
time, no matter if we have enough input or not.
Using NSApp directly seems to confuse something, as the compiler
was expecting an id<NSFileManagerDelegate>. Switched to using
[NSApplication sharedApplication], and specified the delegate
protocol on the window class as well.
Similar to https://bugzilla.gnome.org/show_bug.cgi?id=738740
The GPL3 license header was copy'n'pasted from a
neighbouring source file by mistake, the original
code was not GPL3 licensed, but fell under the
default GStreamer license, which is LGPLv2+.
https://bugzilla.gnome.org/show_bug.cgi?id=685655
Until gcc and GNUStep properly support Objective-C blocks and other
"new" features of Objective-C we can't properly support them without
making the code much more ugly.
https://bugzilla.gnome.org/show_bug.cgi?id=739152
Serves no purpose, is not even hooked up to the
build system, has hard coded file names and paths,
and can easily be replaced with a gst-launch line.
https://bugzilla.gnome.org/show_bug.cgi?id=739844
We need to pass the X11 display to GstGL or else it will
use its own X11 Display pointer, and the GL Context won't get shared
correctly on newer X servers
In file included from /home/thiagoss/gst/head/gstreamer/gst/gst.h:54:0,
from /home/thiagoss/gst/head/gstreamer/libs/gst/check/gstcheck.h:34,
from elements/hlsdemux_m3u8.c:27:
../../ext/hls/gstfragmented.h:8:28: error: redundant redeclaration of ‘fragmented_debug’ [-Werror=redundant-decls]
GST_DEBUG_CATEGORY_EXTERN (fragmented_debug);
Move the definition of the category to after the declaration.
Ported from https://github.com/ylatuya/gst-plugins-bad
This still has some unit tests for alternative renditions and
seeking, which are commented out for the time being until we
support them properly.
1. glcontextid function is replaced by gstreamer gst_gl_context_new_wrapped .
2. call gst_init before gst_gl_display_new , seems gst_gl_display_new depends
on gst_allocator_register , which only worked after gst_init called
3. flush gstreamer OpenGL context before using shared texture, fix
flicker problem.
https://bugzilla.gnome.org/show_bug.cgi?id=735566
Use the sticky events to compose the streamheader as they are the
ones that are persisted to config new pads linked. Instead of storing
them ourselves rely on the pad storage that already orders it for us
https://bugzilla.gnome.org/show_bug.cgi?id=732596
Check that end_of_seq() [EOSEQ] and end_of_stream [EOS] NAL units
are correctly parsed and the reported NAL unit size yields 1 byte,
i.e. the only NalHeaderBytes in there.
https://bugzilla.gnome.org/show_bug.cgi?id=732553
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Check that conversion to byte-stream/au formats work and that we
can effectively drop broken/invalid NAL units from the resulting
access unit buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=732203
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
If an SEI NAL unit with a buffering_period() message is inserted
between an SPS and PPS NAL unit, check that the output buffer still
contain it. i.e. make sure that this SEI message is not dropped.
https://bugzilla.gnome.org/show_bug.cgi?id=732156
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
It was previously a mix and match of both variants, introducing just too much
confusion.
The prefix are from now on:
* GstMpegts for structures and type names (and not GstMpegTs)
* gst_mpegts_ for functions (and not gst_mpeg_ts_)
* GST_MPEGTS_ for enums/flags (and not GST_MPEG_TS_)
* GST_TYPE_MPEGTS_ for types (and not GST_TYPE_MPEG_TS_)
The rationale for chosing that is:
* the namespace is shorter/direct (it's mpegts, not mpeg_ts nor mpeg-ts)
* the namespace is one word under Gst
* it's shorter (yah)
The reshape property was never used.
Replace the draw property with a signal.
Based on patch by Mathieu Duponchelle <mathieu.duponchelle@epitech.eu>
https://bugzilla.gnome.org/show_bug.cgi?id=704507
ATSC has its own version of the EIT table (DVB also has one).
This patch adds parsing for the ATSC EIT table and also fixed
the section identification to mark it as the ATSC one.
The implementation aws refactored to reuse some common internal
structures from ETT.
Also adds its dumping function to ts-parser example
https://bugzilla.gnome.org/show_bug.cgi?id=730435
Adds the system time table structure and functions for convenient parsing of
it and for getting the UTC datetime that it represents. Also adds its
information dumping to the ts-parser example
https://bugzilla.gnome.org/show_bug.cgi?id=730435
Add a parsing function for MGT and also detect the EIT tables
for ATSC, the EIT pids are reported inside the MGT and we are still
only relying only on the table id for detecting it. In the future we
would want to also check the pid and compare with whatever the MGT
previously reported to confirm that it is indeed the EIT.
https://bugzilla.gnome.org/show_bug.cgi?id=730435
Before:
GST_GL_PLATFORM=cocoa GST_GL_WINDOW=cocoa
gst-launch-1.0 videotestsrc ! glimagesink
After:
GST_GL_PLATFORM=cgl GST_GL_WINDOW=cocoa
gst-launch-1.0 videotestsrc ! glimagesink
but still pass --enable-cocoa to configure script
because currently it can only be used with cocoa API.
We could later have cgl/gstglcontext_cgl.h that manages
a CGLContextObj directly and cocoa/gstglcontext_cocoa.h
would just wrap it.
So that it could be used with other Apple's window APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=729245
Expose one more libcurl option: CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.
This allows authenticating the server by the MD5 fingerprint of
the server's public key.
https://bugzilla.gnome.org/show_bug.cgi?id=723167
Use COGL_VERSION_ENCODE to check for the minimum required and maximum allowed
cogl version. In certain situations just using the COGL_VERSION_* macro name can
give you the following error:
error "COGL_VERSION_MAX_ALLOWED must be >= COGL_VERSION_MIN_REQUIRED"
Add standalone test application that demonstrates how to use the new
VP8 bitstream parsing library, while also allowing simple debugging/
tracing of IVF files.
[clean-ups, updated to new parser API]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This patch provides the basic infrastructure required for this.
Upload and Download has been ported to this.
Has the nice effect of allowing GstGLMemory to be our
refcounted texture object for any texture type (not just RGBA).
Should not lose any features/video formats.
We create our textures (in Desktop GL) with GL_TEXTURE_RECTANGLE,
vaapi attempts to bind our texture to GL_TEXTURE_2D which throws a
GL_INVALID_OPERATION error and as thus, no video.
Also, by moving exclusively to GL_TEXTURE_2D and the npot extension
we also remove a difference between the Desktop GL and GLES2 code.
https://bugzilla.gnome.org/show_bug.cgi?id=712287
- cmake could not find glib
- put gtk variables at the beginning to avoid GL conflicts
- update examples to clutter-1.8
- use const instead of deprecated G_CONST_RETURN
- set max pending events to 0 to make cube example works again
On linux, the GSource func attached to the clutter_threads_add_idle
was not getting the cpu ressource periodically.
Because the use of clutter_threads_enter/leave inside the fakesink
callback seems to be too strong.
So remove the use if clutter_threads_enter/leave in the fakesink callback.
Then replace GQueue by GAsyncQueue to keep thread safe access to the
communication queues between clutter and gst-gl.
Call clutter_threads_add_idle with high priority.
It requires at least clutter 0.8.6 since lower clutter versions are
not compatible with GL_TEXTURE_RECTANGLE_ARB.
Remove use of ClutterEffectTemplace since it does not exist in
clutter 0.9.
The external opengl context must be specify when creating
our OpenGL context (glx) or just after (wgl).
When calling glXCreateContext or wglShareLists, the
external opengl context must not be current.
Then our gl context can be current in the gl thread while
the external gl context is current in an other thread.
See tests/examples/clutter/cluttershare.c
Partially revert previous commit. It's not an issue with glimagesink
Xoverlay interface. It's always the same intel bug with direct
rendering redirection (the one that affects each opengl application
with compositing managers). It works fine with DRI2 and UXA
acceleration. Still leaving effects disabled because I'm testing intel
hardware that doesn't support FBOs.
GLimagesink XOverlay interface doesn't seem to work with composite
redirection on intel (and I believe ati too). Windows aren't
redirected offscreen at all. This commit just shows that the example
correcty works with ximagesink. The most evident difference I see is
that glimagesink reparents the xoverlay window into its own while both
x and xvimagesink destroy their window and render directly to the
xoverlay one.
Revert the "move windows" thing from commit
175f7a707bc922f3facc63e7d9b6d01f9bb6b1b0
Windows are offscreen who cares about their position? If you see the
windows something is going wrong with composite redirection.
This reverts commit 96e4ab18c2cf9876f6c031b9aba6282d0bd45a93.
You should have asked first. And you would have been told "no",
because it causes people on development branches to do a huge
amount of extra work.
Add xray effect. Maps luma to a negative, slightly cyan tinted, curve,
applies some light gaussian blur and multiplies it with its sobel edges. Not
sure about the name, likely to change. Probably still needs some tuning.
Tests for PAT, PMT, and NIT
Creates a new table, and populates it with descriptors.
Parses the newly created tables, and checks the data.
Creates a GstMpegTsSection from the tables, and packetize the sections.
The packetized section data is byte-wise compared to a static byte array
https://bugzilla.gnome.org/show_bug.cgi?id=723953
The thread that calls the success/failure callback can be the
same that is adding/removing the element as the IDLE probe can
happen instantly if the pad is not 'busy'.
This required moving some checks for the callback counter around
as well as removing some pad pushes from the main test thread as
they were made useless after the IDLE pad probe was fixed in core
by commit 0324358ebc
* stream-start-id is mandatory at the beginning, so add that to the
gdp headers
* caps must be sent before new segment, invert the order from legacy
0.10 code
And fix the tests as a ref is now kept for those buffers that compose
the header
Most of the tests weren't updated after the sticky events order
and stream start. Fix that and refactor those tests check that
are the same to some common functions.
Those functions still don't actually test the content but at
least now they are in a single place and can be improved
without replication
Commit 6af387cd5a made h264parse
strip a leading 0x00 byte from some output scenarios. This broke
tests as bs_to_nal test expects one more byte on the output.
Fix this by comparing the output with the expected stripped version,
too.
When outputting in AVC3 stream format, the codec_data should not
contain any SPS or PPS, because they are embedded inside the stream.
In case of avc->bytestream h264parse will push the SPS and PPS from
codec_data downstream at the start of the stream, at intervals
controlled by "config-interval" and when there is a codec_data change.
In the case of avc3->bytstream h264parse detects that there is
already SPS/PPS in the stream and sets h264parse->push_codec to FALSE.
Therefore avc3->bytstream was already supported, except for the stream
type.
In the case of bystream->avc h264parse will generate codec_data caps
from the parsed SPS/PPS in the stream. However it does not remove these
SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc
except that the codec_data must not have any SPS/PPS in it.
|--------------+-------------+-------------------|
|stream-format | SPS in-band | SPS in codec_data |
|--------------+-------------+-------------------|
| avc | maybe | always |
|--------------+-------------+-------------------|
| avc3 | always | never |
|--------------+-------------+-------------------|
Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new
structure for fragmented MP4 called "avc3". The principal difference
between AVC1 and AVC3 is the location of the codec initialisation
data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box
(moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the
first sample of every fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=702004
While it was a great idea, various g-i based bindings don't support
GArray with entries greater than sizeof(gpointer) :(
So let's just make everybody happy by just using GPtrArray.
And since we're breaking the API, also rename the various descriptor fields
to no longer have the descriptor_ prefix.
It does cost a bit more in terms of memory/cpu usage, but makes it usable
from bindings.
Do state changes from sink to src. Fixes race condition in
pull mode test where the source will start up and push buffers
to queue/identity or aiffparse before the main thread has
managed to set them to playing yet.
These are the values officially registered in the base specification
(H.222.0/13818-1). Later on we can add other enums for other variants
Note that the enum is not used in the structure fields (such as a pmt
stream stream_type field) since it can contain values from other
variants.
Serves as an example of usage of the new mpegts library from an
application.
Will parse/dump all sections received on a bus.
Usage is ./tsparse <any gst-launch line using tsdemux or tsparse>
Examples:
./tsparse file:///some/mpegtsfile ! tsparse ! fakesink
./tsparse dvb://CHANNEL ! tsparse ! fakesink
./tsparse playbin uri=dvb://CHANNEL
./tsparse playbin uri=file:///some/mpegtsfile
...
https://bugzilla.gnome.org/show_bug.cgi?id=702724
