Since both g_value_set_object() and g_weak_ref_get() takes a reference
there will be two new references to the GstWebRTCICE object when there
should be only one. g_value_take_object() has the same functionality as
g_value_set_object() but does not take a reference.
Without this change, the GstWebRTCICE object will be leaked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2333>
Mixing C loops with switch statements is a bad idea as break has a
different meaning in both. Breaking inside the switch statements wrongly
caused further loop iterations.
Instead use goto to get out of the loop and continue to do another loop
iteration, and never ever use break except for the end of a case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
Some streams have 2 PMT sections in a single TS packet. The first one is "valid"
but doesn't contain/define any streams. That causes an unrecoverable issue when
we try to activate the 2nd (valid) PMT.
Instead of doing that, pre-emptively refuse to process PMT without any streams
present within. We still do post that section on the bus to inform applications.
Fixes#1181
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2310>
In push mode (streaming), if the received chunk buffer size from _chain is bigger
than output buffer size, the flags of the divided-buffers are propagated to the
DISCONT flag from first received chunk buffer. This unexpected buffers contained DISCONT
flags are abnormally transformed when changing the sampling rate by audioresample element.
So unset unnecessary DISCONT flag before pad_push().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2305>
Previously, we only added it when actually performing synchronization
based on the NTP time.
The information can be useful downstream in other situations too, and
we can compute a NTP time as soon as we get a sender report with the
relevant information.
Co-authored-by: Mathieu Duponchelle <mathieu@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
The decision to store the input buffer depends on whether extensions
are to be added to the output buffer, I assume as an optimization.
This creates an issue for subclasses that call negotiate(), where
header_exts is actually populated, from their handle_buffer()
implementation: at chain time, no header extension has been negotiated
yet, which means that we don't add extensions to the first batch of
buffers that comes out.
Keep track of whether negotiate has been called (this is different
from the negotiated field) and always store the input buffer until
then. This fixes the issue while largely preserving the optimization.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2304>
The previous iteration of the code was inferring the type of the
frame by looking at the overall size of the gst-payloaded packet.
It is more robust to actually parse the payload and look at the
actual data buffers it contains.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2303>
regardless of whether they are input as individual buffers or
buffer lists.
The ONVIF specification requires all packets to hold the extension,
it makes no sense to behave differently when handling buffer lists.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2303>
Pipeline such as:
gst-launch-1.0 -vf videotestsrc ! video/x-raw,format=NV12,colorimetry=\(string\)bt709 \
! videoscale ! video/x-raw,format=I420 ! fakesink
Always trigger a error:
ERROR video-info video-info.c:556:gst_video_info_from_caps: no width property given
Because it is called before the fixate_size(), the src caps' resolution
may be absent or not fixed. That causes that the src video info can not
be created correctly and we can not inherit the colorimetry and chroma-site
from the input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2289>
Fixing this pipeline:
gst-launch-1.0 filesrc location=sample.png ! pngdec ! videorate ! fakesink
- videorate receives a single buffer with pts = 0, duration = invalid;
- then it receives eos triggering this buffer to be pushed downstream;
- the pushing code was assuming that a duration was set, which is
impossible as we received a single buffer and no output framerate was
set either. So the best we can do is to push the buffer without
duration.
Fix#1177
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2296>
The va pool is used for GPU side surface/image, its alignment should
not be changed arbitrarily by others. So we decide not to expose the
GST_BUFFER_POOL_OPTION_VIDEO_ALIGNMENT flag anymore.
Instead, user can call gst_buffer_pool_config_set_va_alignment() to
set its surface/image alignment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2282>
According to spec:
color range equal to 0 shall be referred to as the studio swing
representation and color range equal to 1 shall be referred to as
the full swing representation.
The current status is just the opposite.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2288>
GAP events flagged with MISSING_DATA are transformed into GAP buffers
flagged with CORRUPTED.
In these cases, it is preferable to simply keep rendering the previous
buffer (if there was one) instead of flashing the pad in and out of
view.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
When the GAP event was flagged with MISSING_DATA, subclasses
may want to adopt a different behaviour, for example by repeating
the last buffer.
As we turn these gap events into gap buffers, we need to flag
those, we do so with a new custom meta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
Returning TRUE from the `transform_meta` function tells
GstBaseTransform to copy the meta into the new buffer. If videoscale
has already transformed a meta by scaling it, it should always return
FALSE to avoid duplicating the meta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1630>
Meson generates a gdbinit file that will automatically load gstreamer
script. However that script uses a helper python module that needs
PYTHONPATH to be pointing into the right location in the source
tree to be able to find gst_gdb.py.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1796>
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6. When binding to an IPv6 address, this
results in the following error:
gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)
This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
RFC 8216 6.3.3 "Playing the Media Playlist File" : states that for live media
playlists "the client SHOULD NOT choose a segment that starts less than three
target durations from the end of the Playlist file"
This is an off-by-one error. Since we are looking for the "index" of the
segment, we need to subtract 1 from the searched position.
Ex: For a playlist with 12 entries, we want to start playback on the 9th segment
... which is at index 8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2259>
When we fixup src caps, the current way of handling the HDR fields is not
correct.
1. We trim the HDR fields only when the input caps is not a subset of the
fixup src caps. But in fact, the input caps with HDR fields such as the
"mastering-display-info" can possibly be the subset of the fixup src caps,
if they have all same other fields.
2. We always copy the colorimetry from input caps to src caps if it is
absent. But when hdr-tone-mapping is enabled, the HDR->SDR conversion makes
the colorimetry change. We should use downstream's setting, or just use the
default colorimetry of SDR.
We changes to:
1. If hdr-tone-mapping is enabled, we trim all HDR fields and add a correct
colorimetry.
2. Copy colorimetry from input if it is still absent.
3. Consider the subset replacement.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2244>
Since d0133a2d11 "videoconvert: Allow
passthrough for ANY caps features" videoconvert will always claim that
it supports any kind of memory which is true in very specific case (when
it is running in passthrough mode). To get elements that autoplug
converters depending on the caps running in the pipeline (like
autovideoconvert), we need to have converters no lie about what they can
do when queried `accept_caps` or `query_caps`.
This still accepts any caps feature as before but it introduces
a restriction in the way we handle memory capsfeatures.
We keep previous behaviour in videoconvert and videoscale.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
Now that videoconvert and videoscale's are both based on
GstVideoConverter and are using the exact same code, it makes much more
sense to have one element doing the two operation, and it can be
more efficient in some cases (one single path for both operations).
This removes the `videoscale` and `videoconvert` plugins but keeps the element
but makes them also do both operations (adding some APIs to each element).
There is a small change in API for the `videoscale:dither` property which
was previously a totally unused boolean, it is now an enum and is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
The format of the caps fields is
ssrc-(SSRC_VALUE)-(ATTRIBUTE_NAME)=(ATTRIBUTE_VALUE)
.
Parsing of the attributes from the caps into the SDP is not implemented
as this depends not only a single stream's caps but on the whole rtpbin
configuration.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
Found via an analyzed build for Clang. Specifically we had:
gstav1parse.c[1850,11] in gst_av1_parse_detect_stream_format: Logic error: The left operand of '==' is a garbage value
gstav1parse.c[1606,11] in gst_av1_parse_handle_to_small_and_equal_align: Logic error: The left operand of '==' is a garbage value
Also a couple of false-positives:
gstav1parse.c[1398,24] in gst_av1_parse_handle_one_obu: Logic error: Branch condition evaluates to a garbage value
gstav1parse.c[1440,37] in gst_av1_parse_handle_one_obu: Logic error: The left operand of '-' is a garbage value
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2230>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.
This seems to have also fixed some documentation issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
Our decoder implementation does not use downstream d3d11 pool for
decoding because of special requirement of D3D11/DXVA. So preallocation
using the downstream buffer pool will waste GPU memory in most cases.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2211>
This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.
These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).
Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.
Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>
This reverts commit 652773de36 and
modifies it to rename the caps field name to coded-picture-structure.
It was previously removed because it confuses the decoder and we didn't
have a valid use case for including it in the encoded caps at this
stage. We now do have such a use case but still don't want to confuse
the decoder, so the field is renamed.
However, it is still not accurate without looking at the SEI picture
structure of each frame, so it was named coded-picture-structure. If its
value is "frame" it is most likely progressive, if it's "field" it is
most likely interlaced or mixed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2177>
get_merged_collection() returns an owned stream collection and was
leaked in the else block.
Fix leak when running:
GST_TRACERS=leaks GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/954>
Make sure that the requested stream selection isn't identical to the current
one. If that's the case, just carry on as usual.
This avoids multiple `streams-selected` posting ... when the selection didn't
change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2185>
* glimagesink is not a recommended one on Windows
* Remove directdrawsink section
* d3dvideosink is legacy and should not be recommended
* Add d3d11videosink part
* directsoundsink should be deprecated
* Add wasapisink/wasapi2sink part
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2144>
The current way names the level by the number of B frames it contains, the
less it contains, the higher level it is. So the non ref B frames are in the
lowest layer and the B frames in the highest level refer to I/P frames.
But the widely used way is just the opposite, the ref B frames are in the
lower level and non ref B frames are at the highest level.
The is just a terminology change, and does not have any effect for compression
result and quality.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2149>
It doesn't matter for measurement purposes whether receiving them takes
a while and various PTP servers are not prioritizing to send them,
causing them to be dropped unnecessarily and preventing proper
synchronization with such servers.
This is especially a problem if the RTTs in the network are very low
compared to the additional delay imposed by the server.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2161>
timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>
In case of re-syncing (i.e. moving to another partition to avoid too much of an
interleave), there was previously no checks to figure out whether a given
partition was already fully handled (i.e. when coming across it again after a
previous resync).
In order to handle this at least for single-track partitions, check whether we
have reached the essence track duration, and if so skip the partition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>
The essence track position should only be overriden if we sucesfully switched to
another position. In case of EOS we do not want to override it else we would
increase the track position *again* at the end of this function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>
This field is used by DXVA/NVDEC/VA, and each specification
describes (NVDEC is not well documented) that it's the number of
bits used in short_term_ref_pic_set().
DXVA doesn't explicitly mention that whether the size of
emulation preventation bytes (EPB) is inclusive or not, but
VA is clearly specifying that it's the size after removing
EPB. Excluding EPB size here makes more sense therefore.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1930>
The documentation could be read to mean that the caller continuous to
'own' the buffer, and that there is some other mechanism to find out
when to unref it.
Clarify that "not taking ownership" here means "taking a reference",
and specify that you can unref it at any time after calling the
function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2110>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
When building for Android, chances are that gstreamer is going to be
loaded from Java using System.loadLibrary(). In that case we can
initialize GStreamer (including static plugins), redirect log functions,
etc.
This code is copied from cerbero because it can be used with
gstreamer-full-1.0 too. Cerbero needs to be adapted to drop that code
and generate gst_init_static_plugins() function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/617>
Added GstVaFeature enum type, and new parameter for VA allocator's
set_format() and get_format(). Also added a new parameter in VA pool
gst_va_pool_new_with_config() and
gst_buffer_pool_config_set_va_allocation_params().
This new parameter will define if derived images will by used for
buffer mapping.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2057>
Expose description of vendor for user information, similar to
the description property of d3d11device.
Also, set description and DRM device path on GstContext structure
so that user can read them and it will be printed on terminal
when gst-launch-1.0 is used
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2064>
The console HANDLE will be keep signalled state unless application
reads console input buffer immediately. So we should read and flush
console input buffer from the thread where the event is signalled,
instead of GMain context thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2058>
Configure playsink tried element with the bus of the main pipeline.
That tried element can be a gl video sink, which would benefit from being
able to propagate context messages to the main pipeline and have other
internal pipeline elements configured with it. Having different elements
configured with the same GL context allows them to share buffers with
video/x-raw(memory:GLMemory) caps and achieving zero-copy.
Thanks to Alicia Boya García <aboya@igalia.com> for her work co-debugging
the issue and contributing to find a solution.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2056>
Sources that can internally handle buffering shouldn't have yet-another
buffering element after it. This can be simply detected by checking if it can
answer a TIME BUFFERING query just after creation.
If that is the case, we can expose the element source pads directly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
By default, the classification is
"Converter/Filter/Colorspace/Scaler/Video/Hardware", but if VA
post-processor driver supports either color balance, skin tone
enhancement, sharpening or noise reduction, "Effect" is added.
Thus, if vapostproc ranking is raised, it can be chosen by
autovideosink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2066>
g_signal_disconnect*() doesn't stop any existing callbacks from running
which means that if the notify::state callback is in progress in one
thread and the data channel object is finalize()ed in another thread,
then there could be a use-after-free trying lock the data channel
object.
We can't reasonably use a GWeakRef as we don't have a 'parent' object to
free the GWeakRef after the data channel is finalized. This is also
complicated by the fact that the application can hold a reference to the
data channel object that would live beyond the lifetime of webrtcbin
itself.
We solve this by implementing a ghetto weak-ref solution internally with
a list of outstanding data channels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
If things progress fast enough, some state changes may not be seen be
the waiting code.
Fix by:
1. keeping a list of all the state changes
2. waiting checks each entry and if the relevant state is found, all
states up to and including then are removed.
This ensures that any waits will see all the state sets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Input (sink pads) is the already-ssrc-muxed stream with the relevant rtp
sdes header extensions already applied:
- mid
- stream-id
- repaired-stream-id
Output (src pads) have the pads separated into individual ssrc's as
that's what rtpbin gives us.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Each rtpbin exposed recv_src pad is now exposed as webrtcbin src_%u pad
now with no meaining applied to the value of %u. Previously this used
to mean the mline in the SDP. If this is is still required, then the
transceiver can be retrieved from the pad and the "mlineindex" property
from the transciever. The "mid" is also retrievable from the
transceiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
When creating a transceiver when creating an answer, the media kind of the
transceiver was never set correctly initially. This would lead to a
GST_WARNING being produced about changin a transceiver's media kind.
Fix by retrieving the GstSDPMedia kind from the offer instead as the answer
GstSDPMedia has not been set as the answer caps have not been chosen yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
In order to other plugins use gstva objects, such as allocators and buffer
pools, this merge request move them from the va plugin to the gstva library.
This objects are not exposed in <gst/va/gstva.h> since they are not expected
to be used by users, only by plugin implementators.
Because of the surface copy design, which is used to implement allocator's
mem_copy() virtual function, depends on the vafilter, which is kept inside
the plugin, memory copy through VAPosproc is disabled and removed temporarly.
Also added some missing parameter validation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
Untabifying header file.
The logging category was moved from the plugin generic category to
the display category. It can argue that video formats hacks are
display dependant.
Added validations for input parameters.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2048>
... and add more encoding options.
QSV API supports dynamic bitrate change without IDR insertion.
That's more efficient way of runtime encoding option update
than starting from new sequence with IDR per bitrate option change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2039>
FFMPEG 5+ doesn't allow overriding the codec anymore (causes a segfault if you
attempt to do that). But the best part is ... that with the current caps
implementation in pad template and gst_ffmpeg_caps_to_codecid() we would never
replace it by anything different than the existing codec id.
Fixes#1054
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2052>
../gst-libs/gst/mpegts/gst-dvb-section.c:206:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_events = 12;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:365:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_streams = 12;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:543:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_streams = 12;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:885:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_services = 8;
^
../gst-libs/gst/mpegts/gst-dvb-section.c:1316:9: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
guint i = 0, allocated_services = 8;
^
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
Check that `self` and `self->callback` are defined. `self` can be set to
`NULL` in `remove_listener`, and `self->callback` can be set to `NULL`
inside `gst_amc_surface_texture_jni_set_on_frame_available_callback`.
This can cause a segfault since the Java object can outlive the C
object, and call the callback after `remove_listener` is called.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2024>
Use the return value from gst_element_link_pads() and gst_bin_add()
Fixes:
../ext/gl/gstglmixerbin.c:305:12: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
gboolean res = TRUE;
^
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2038>
Produce an error if we try to use the feature of holding capture buffer
but it is not supported by the driver. Ingoring this can lead to stalls
as the driver will run-out of capture buffer to decode into. This
affects slice decoders but also split-field interlaced decoding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
This flag is set when the stream is interlaced and the specific
slice is made of single parity fields rather the paired at the
macroblock layer. This is rarely needed in late decoding process
but the Rockchip RKVDEC HW interface requires it, hence needs to
be passed through V4L2 Stateless interface.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2009>
The official releases of libxml2 have been migrated to gitlab where
they are published for download via HTTP instead of FTP. Besides
adapting to the new location we now also get the benefit that the
tarball can be downloaded in restricted networks where FTP might be
blocked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2020>
Some problematic H265 stream may miss the reference frame in the DPB,
and get some message like: "No short term reference picture for xxx".
So there may be empty entries in ref_pic_list0/1 when passing to
decode_slice() function of sub class. We need to check the NULL pointer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2018>
Specify modules to look for OpenEXR when CMake is used, as we may have
CMake config files instead of pkg-config files that result from building
OpenEXR, which may be built with CMake which is typically the case on Visual
Studio builds.
In this case, Meson does seem to find the 'OpenEXR' package with CMake
after trying pkg-config, but does not consider it enough without the
'modules:' argument.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2014>
This reverts commit 3cad3455377d5a22faa138d9df840257059776c8.
That commit was breaking the association between an audio and
a video track in the standard case.
In practice, to support carrying separate MediaStream, we are
going a way to map what MediaStreamTrack belong to what MediaStream,
but that will require some thinking about the API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2023>
From https://datatracker.ietf.org/doc/html/draft-ietf-mmusic-msid-16:
> Multiple media descriptions with the same value for msid-id and
> msid-appdata are not permitted.
Our previous implementation of simply using the CNAME as the msid
identifier and the name of the transceiver as the msid appdata was
misguided and incorrect, and created issues when bundling multiple
video streams together: the ontrack event was emitted with the same
streams for the two bundled medias, at least in Firefox.
Instead, use the transceiver name as the identifier, and expose
a msid-appdata property on transceivers to allow for further
customization by the application. When the property is not set,
msid-appdata can be left empty as it is specified as optional.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2003>
WebKit is not going to render anything until a URI is set, leading to a
WPE posting a `WPE View did not render a buffer` error message. To avoid
requiring the user to know it if they only want to use
`wpesrc::load-bytes` we can just use `about:blank` as default and
everything will work as users would expect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1492>
This was not a problem here because even if we end up accidentally
linking to the wrong pad, things will work out eventually as long as
one pad-added is emitted for each pad that is added.
But it will be a huge problem if someone copies this code and changes
something that requires different handling for different sorts of
pads. The resultant code will be racy. Let's not do this, it's a bad
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2008>
Adding new encoder elements nvd3d11{h264,h265}enc for Direct3D11
input support and re-written nvcuda{h264,h265}enc elements.
Newly writeen elements have some differences compared with old
nv{h264,h265}enc including non-backward compatible changes.
* RGBA is not a supported input format any more:
New elements will support only YUV formats to avoid implicit conversion
done by hardware. Ideally it should be done by upstream element
in order to have more control on it. Moreover, RGBA support can cause
redundant RGBA -> YUV conversion if multiple encoders are
used for the same RGBA input
* Subsampled planar format support is dropped:
I420 and YV12 format are not supported formats for Direct3D11.
Although it's supported in CUDA mode, it's not a hardware friendly
memory layout and it will waste GPU memory since UV planes
will have large padding due to the memory layout requirement of NVENC.
* GL support is dropped: Similar to the RGBA case,
GL support in encoder would be suboptimal if GL input is
used by multiple encoders, because each encoder will copy GL memory
into CUDA memory.
Upstream cudaupload element can be used for GL <-> CUDA
interop instead.
* No more pre-allocation of encoder input surfaces. New implementation
will use input CUDA memory without copy (zero-copy) or
will copy into a NVENC's input buffer struct in case of
system memory input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1997>
Dispatches a list of active touch events to the wpe view on each
received TOUCH_FRAME event. Touch inputs currently only move the cursor,
since wpe doesn't seem to support clicking/scrolling or zooming with
touch input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Represents touchscreen events as a trail of black squares, one for each
reported position. Additionally, this adds the `display-mouse` and
`display-touch` properties to toggle visibility of mouse/touchscreen
events, since touchscreens often emulate mouse events, as well as
logging for all received navigation events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Add 5 new navigation event types for touchscreen events, with the same
naming and meaning as in libinput - touch-down, touch-motion, touch-up,
touch-frame and touch-cancel - as well as constructors and parse
functions for them.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Add a function to get x/y coordinates from suitable navigation events,
and one to create a copy with given coordinate values.
For e.g. translating event coordinates, this avoids having to either
switch on the event type to select the right parse function, or
having to rely on implementation details of the underlying event
structure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
This deprecates the current send_event interface, and the wrapper
functions based on it, replacing it with a send_event_simple interface and
wrapper function. Together with the new event constructors, this avoids
implementations having to directly access the underlying structure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Since the strings are empty for GST_MSDK_CAPS_MAKE_WITH_DMABUF_FEATURE
and GST_MSDK_CAPS_MAKE_WITH_VA_FEATURE, when excuting
gst-inspect-1.0.exe msdkh265enc, there will be convert static caps error
because of the extra semicolon between two empty strings. Now macro
definitions are added to avoid this issue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2004>
Pass the current frame to the duplicate_picture callback. This makes it easier
to set the frame's output_buffer if we already have one available. Also
documented that unlike VP9, it is not optional to implement this as the
picture will populate the DPB if it is a key-frame. To ensure this, remove the
default implementation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1992>
The system_frame_number is notably used by V4L2 decoder as a unique
indentifier for the frame that was decoded. This value is used to tell driver
which frame to reference, as V4L2 does not have an efficient mechanism to
otherwise pass back the frames.
For this reason, and because it is more ligical, copy the original
system_frame_number into the duplicate picture instead of using the current
frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1992>
Two RTP Header extensions are very relevant for rtprtxsend/receive.
1. "urn:ietf:params:rtp-hdrext:sdes:rtp-stream-id": will always be removed
2. "urn:ietf:params:rtp-hdrext:sdes:repaired-rtp-stream-id": will be written
instead of the "rtp-stream-id" header extension.
Currently it's only a simple replacement of one header extension for
another however a future change would only add the relevant extension
based on some heuristics (like, video frames only on one of the rtp key
frame buffers, or only until the rtx ssrc has been validated by the peer)
in order to reduce the required bandwidth.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
Showing existing keyframe have special meaning in AV1. All the references
frame will be refreshed with the original keyframe information. The refresh
process (7.20) is implemented by saving data from the frame_header into the
state. To fix this special case, load all the relevant information into the
frame_header.
As there is nothing happening in between this and the loading of the key-frame
into the state, this patch also remove the separate API function, using it
internally instead.
Fixes#1090
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1971>
We need to parse the payload type map provided by the offer SDP and
set those values on the payloader, otherwise webrtcbin will create
a recvonly answer SDP and we won't send anything to the browser.
Fixed it for both C and Python sendrecv examples.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1864>
Earlier, the example only supported one negotiation mode:
* Browser client is running, gstreamer starts a call and sends offer
Now these three modes are also supported:
* Browser client is running, gstreamer starts a call and sends an
offer request
* gstreamer connects and waits for browser client to start a call and
send an offer
* gstreamer connects and waits for browser client to start a call and
send an offer request
The following features are still missing:
* Data channel support
* TWCC support + stats logging
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1864>
The documentation for several gst_*_writable_structure functions stated
that they would never return NULL, without making clear that the passed
object is required to be writable. This changes the wording in those
cases to make that requirement more clear.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1784>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
We bind transceivers' fec_percentage property to the FEC encoder
percentage property, and with the binding bidirectional a deadlock
was introduced by the latest changes from !1762:
We take hold of the transceiver's object lock, then add the binding
and set the property to its initial value on the encoder, which causes
set_property to deadlock in the transceiver when the binding kicks in.
Changing the binding type to DEFAULT (source to target) is enough
to address the deadlock and still serves the original intent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1967>
Previously the result of the calculations included inaccuracies caused
by the NTP clock estimation, which caused the timestamps to jitter
+/- 1/clockrate.
By reorganizing the calculations it is possible to get rid of this
inaccuracy and calculate deterministic and exact packet timestamps based
on the actual NTP clock as long as the estimation is not off by more
than 2**31 clockrate units.
The only remaining inaccuracy that is introduced now is caused by the
conversion from the NTP clock to the pipeline clock.
Also split up debug output, demote many messages to the trace debug
level and output more intermediate results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1955>
This is difficult to encounter in ordinary networks, but is
encountered when using tc-netem to add random delays to packets, and
also when your UDP stream is bonded over multiple links with varying
characteristics.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1952>
Holding previously decoded but not outputted pictures even after
new_sequence is not a safe approach in various aspect.
However, we cannot drain out DPB on new_sequence() unconditionally,
because there is a case where decoder should drop decoded pictures
if NoOutputOfPriorPicsFlag is set.
To detect NoOutputOfPriorPicsFlag before the new_sequence() call,
this patch splits decoding process into two path, one for nal unit parsing
in order to detect NoOutputOfPriorPicsFlag and then each nal unit
will be decoded.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1937>
Gapless playback is handled by adjusting buffer timestamps & durations
and by adding GstAudioClippingMeta.
Support for "Frankenstein" streams (= poorly stitched together streams)
is also added, so that gapless playback support doesn't prevent those
from being properly played.
Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1028>
1. Always set the according GstVaH264EncFrame pointer when GstVideoCodecFrame
pointer is assigned, which can make the logic safe.
2. Fix the forgotten change in _sort_by_frame_num. Its input pointer now is
GstVideoCodecFrame type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1935>
Add properties to control input cropping in the V4L2 device.
The input cropping is applied before composing the result to the
capture buffer. By default the capture size will be set to the same
size as the crop region, but it can be scaled to a different output
frame size if supported by the V4L2 device.
If scaling is not supported, the cropped image will
be composed as is into the top-left corner of the capture buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
Get the current crop bounding region from the V4L2 device so
that it can be provided to applications and used to validate
crop settings. Also make the default crop region available so
that it can be used to reset the crop when appropriate.
Uses the selection API when available with fallback to the crop
API for older kernels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
The gst_v4l2_object_set_crop() is used for removing buffer
alignment padding. Give it a name that better reflects
that usage. This helps to distinguish from cropping of the
input image (e.g. cropping at the image sensor on a captre
device), which can be unrelated to the memory buffer padding,
especially if scaling is involved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
The default query handler would go through typefind, which by default accepts
any CAPS. But once configured, parsebin can't reconfigure itself, it should
therefore pass through the ACCEPT_CAPS query to the first element after
typefind (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
Don't reconfigure outputs when the select-streams
event is sent from the app, as the selection may
not take effect for some time. Instead, wait
for the pipeline to confirm the new set of
selected streams when it sends the message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
If we previously had subtitles coming in, the video
may be chained through a text overlay block. Before,
the code would end up trying to link pads that were
already linked and video would not get reconnected
properly.
To fix that, make sure that the candidate
pads are actually unlinked first. If a textoverlay
is present and no longer needed, it will be cleaned
up later in the reconfiguration sequence.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
Requesting a new pad can start a reconfiguration cycle, where
playsink will block all input pads and wait for data on them
before doing internal reconfiguration. If a pad is released,
that reconfiguration might never trigger because it's now waiting
for a pad that doesn't exist any more.
In that case, complete the reconfiguration on pad release.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1180>
Make it posible to configure the element to obtain the timestamps from
reference timestamp meta data instead of using the ntp-offset property,
or estimating its own offset. Currently the only time format supported
is "timestamp/x-unix", i.e. UTC time expressed in the unix time epoch.
In addition the custom event GstNtpOffset has been renamed to
GstOnvifTimestamp, to reflect that it is not necessarily used to convey
the ntp-offset. As a consequence we had to modify a couple of files in
the rtsp-server as well.
Fixes#984
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1683>
This patch fixes a seg.fault in gst_structure_new() with warnings as below.
GLib-GObject-WARNING **:
../gobject/gtype.c:4330: type id '0' is invalid
GLib-GObject-WARNING **:
can't peek value table for type '<invalid>' which is not currently referenced
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1918>
On GstVideoDecoder::{drain,flush}, we send null packet with
CUVID_PKT_ENDOFSTREAM flag to drain out decoder. Which will
reset CUVID parser as well.
To continue decoding after the drain, the next input buffer
should include sequence headers otherwise CUVID parser will
not report any decodeable frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1911>
There could be a case where the new program has the same program number as the
previous one ... but is actually located on a PID previously used for elementary
stream. In that case the program is guaranteed to not be an update of the
previous program but a completely new one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1893>
We need to be able to look for programs by their PID also. Using a hash table
was a bit sub-par (and overkill) for storing a range of programs.
This is needed because there could potentially be two programs with the same
program id but different PMT PID (while one is being deactivated the new one
would "exist").
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1893>
This commit modifies the interleave calculation to allow growing when incoming
data is before the segment start.
The rationale is that there is no requirement whatsoever for data before the
segment start to be "coherent" on all streams.
For example, a demuxer could rightfully send data from the video stream from the
previous keyframe (potentially quite a bit before the segment start) and the
audio from just before the segment start.
This will activate the same logic as growing the interleave when some streams
haven't received buffers yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1892>
* When a stream receives EOS, it will no longer change, we shouldn't take that
stream into account for interleave calculation.
* When streams (re)appear, we do not want to grow the initial interleave values
to excessive values. Instead of setting it to a default of 5s, progressively
grow it to that maximum.
* When the status of input streams change (i.e. going to/from "some haven't
received data yet" and "all have received data"), update the interleave
immediately instead of waiting for (potentially) 5s of data before updating
it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1892>
The point here is that rtpsession will create a new rtpsource when
the field "rtx-ssrc" is present, and when not doing rtx, that means
a random ssrc will create a new rtpsource that will be included in RTCP
messages for the current session.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1882>
Instead of using GstMiniObject to hold H264 frame, now it uses a plain
structure. Besides, instead of holding a reference to
GstVideoCodecFrame, the H264 frame structure is set as a
GstVideoCodecFrame user data.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1856>
According to va_dec_hevc.h, pic_param->st_rps_bits should be set
for accelorater to skip parsing the *short_term_ref_pic_set
(num_short_term_ref_pic_sets) structure.
Also modified fill_picture to get parser info as a parameter,
in order to get slide_hdr->short_term_ref_pic_set_size.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1886>
Fix a small race where a group can receive stream-start
and post a pending buffering message just as another
thread posts a different buffering message, causing them
to be received by the application out of order. In the
worst case, this leads the application receiving a
stale 99% buffering message and going back to buffering
right after the 100% buffering message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1840>
Apparently GtkSharp expects each object has only one ToggleRef at any
time. Assigning element.Handle into Raw has a consequence that second
ToggleRef attempts to get created but fails on g_object_unref () that
breaks a GObject assertion:
toggle_refs_notify: assertion failed: (tstack.n_toggle_refs == 1)
This is because toggle references should be removed with
g_object_remove_toggle_ref(), not a simple unref().
In order to avoid duplicate toggle references, introduce
ElementFactory.MakeRaw(), which creates a GstElement without its
accompanying C# object. The returned raw pointer can be assigned into
another GLib.Object without trouble.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1885>
And use the output segment position for the outgoing timestamp while it
is. This is needed to delay the calculation of `output_ts_offset` until
we actually have a usable timestamp, as tsmux will output a few initial
packets while `last_ts` is still unset.
Without this, the calculation would use the initial `0` value, which did
not have the intended effect of making VBR mode behave like CBR mode,
but always calculated an offset equal to the selected start time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1884>
Fix suppression to support release and debug builds.
Here is the debug build call stack:
```
==10707== by 0x48B5520: g_malloc (gmem.c:106)
==10707== by 0x48D19DC: g_slice_alloc (gslice.c:1069)
==10707== by 0x48D3947: g_slist_copy_deep (gslist.c:619)
==10707== by 0x48D38B8: g_slist_copy (gslist.c:567)
==10707== by 0x4ADC90B: gst_debug_remove_with_compare_func (gstinfo.c:1504)
```
In release build `g_slist_copy (gslist.c:567)` got inlined:
```
==15419== by 0x48963E0: g_malloc (gmem.c:106)
==15419== by 0x48AA382: g_slice_alloc (gslice.c:1069)
==15419== by 0x48AB732: g_slist_copy_deep (gslist.c:619)
==15419== by 0x4A39B8F: gst_debug_remove_with_compare_func (gstinfo.c:1504)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1814>
When doing only a single stream of audio/video this hardly matters,
but when doing many at the same time, the fact that you have to get
a hold of the glib global type-system lock every time you process a buffer,
means that there is a limit to how many streams you can process in
parallel.
Luckily the fix is very simple, by doing a cast rather than a full
type-check.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1873>
There is a chance that pool->buffers[index] sets BUFFER_STATE_QUEUED, but
it has not been queued yet which makes pool->buffers[index] still NULL.
At this time, if pool_streamff release all buffers with BUFFER_STATE_QUEUED
state regardless of whether the buffer is NULL or not, it will cause segfault.
To fix this, also check buffer when streamoff release buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1842>
When tunneling over HTTP, if connection on the second channel happens
before the control timer is created we may trigger an assert in
rtsp_ctrl_timeout_remove(). Avoid that by taking the priv->lock before
attaching the client thread to the context.
Fixes#1025
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1867>
When there is vpp scaling downstream, we need to make sure SFC is not
triggered because vpp may fall into passthrough mode which causes
the decoder negotiation to create src caps with vpp scaled width/height.
This patch includes bitstream's original size in first query with
downstream in gst_msdkdec_src_caps, which is the same for what we do for
color format in this query. This is to ensure SFC scaling starts to
work only when downstream directly asks for a different size instead of
through vpp.
Note that here SFC scaling follows the same behavior as msdkvpp:
if user only changes width or height, e.g. dec ! video/x-raw,width=xx !,
the height will be modified to the value which fits the original DAR.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1838>
* Hide GstCudaMemory member variables
* Make GstCudaAllocator object GstCudaContext independent
* Set offset/stride of memory correctly via video meta
* Drop GST_BUFFER_POOL_OPTION_VIDEO_ALIGNMENT support.
This implementation actually does not support custom alignment
because we allocate device memory via cuMemAllocPitch
of which alignment is almost uncontrollable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
* cudaupload/download
- Specify only formats actually we can deal with
nvcodec elements, not all video formats
- Supports CUDA output for download and input for upload in order
to make passthrough possible, like other upload/download elements.
* cudabasetransform
- Reset conversion element if upstream CUDA memory
holds different CUDA context and the element can accept it.
This is the same behavior as corresponding d3d11 filter elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1834>
This was to support very old V4L2 kernel. As we moved to DMABuf and can now
detach buffers on renegotiation, the buffer it tries to fix no longer exist.
The risk to blocking indefinitly the application does still exist though.
Fixes#1070
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1861>
When we negotiate with downstream, We should use the intersected
caps of input and output to decide the alignment and stream format.
The current code just uses the input caps which may lack the stream
format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
The demux now outputs the AV1 stream in "tu" alignment, so we do not need
to detect the input alignment. But the annex b stream format is not recognized
by the demux, we still need to detect that stream format for the first input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
Decoders that required frame aligmment and didn't have an associated
alpha decoder were skipped. This is because the parser was constructing
caps based on the software alpha decoder, which specify super-frame
alignment.
Iterate over the caps to filter the one that have a matching codec-alpha, with
the semantic the no codec-alpha field means codec-alpha=false. Then if
everything was removed, callback to the original, so that the first non-alpha
decoder will be picked.
Fixes#820
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1855>
Currently for copying the coded buffer onto a GStreamer buffer, the
coded buffer is mapped two times: one for getting the size, and later
for do the actual copy. We can avoid this by doing directly in the
element rather than in the general encoder object.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1845>
We need to always add the RTX/RED/ULPFEC elements as rtpbin will only
call us once to request aux/fec senders/receivers.
We also need to regenerate the media section of the SDP instead of
blindly copying from the previous offer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1762>
When the size of V4L2 capture or output is changes with VIDIOC_S_FMT,
the device is only required to update the compisition window to fit
inside the new frame size. This can result in captured data only being
updated on a portion of the frame after a resize.
Update the composition window to the default value determined by the
V4L2 device driver whenever the format is changed to make sure that
all image data is composed to its full size.
Fixes#765
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1806>
As specified formally in RFC8851
Each rid description is placed in its own caps field in the structure.
This is very similar to the already existing extmap-$id sdp<->caps
transformations that already exists.
The mapping is as follows:
a=rid:0 direction ';'-separated params
where direction is either 'send' or 'recv'
gets put into a caps structure like so:
rid-0=(string)<"direction","param1","param2",etc>
If there are no rid parameters then the caps structure is generated to
only contain the direction as a single string like:
rid-0=(string)direction
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1760>
Not having this field is equivalent with it being 1/1 so consider
it like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
Not having these fields is equivalent with them being mono/0 so consider
them like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
Otherwise fetching of the offer will fail with a cryptic error:
```
Traceback (most recent call last):
File "/../gstreamer/subprojects/gst-examples/webrtc/sendrecv/gst/webrtc_sendrecv.py", line 56, in on_offer_created
offer = reply['offer']
TypeError: 'Structure' object is not subscriptable
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1821>
```
ERROR peer '5762' not found
Traceback (most recent call last):
File "/../gstreamer/subprojects/gst-examples/webrtc/sendrecv/gst/webrtc_sendrecv.py", line 190, in <module>
res = loop.run_until_complete(c.loop())
File "/usr/lib64/python3.10/asyncio/base_events.py", line 641, in run_until_complete
return future.result()
File "/../gstreamer/subprojects/gst-examples/webrtc/sendrecv/gst/webrtc_sendrecv.py", line 155, in loop
self.close_pipeline()
File "/../gstreamer/subprojects/gst-examples/webrtc/sendrecv/gst/webrtc_sendrecv.py", line 142, in close_pipeline
self.pipe.set_state(Gst.State.NULL)
AttributeError: 'NoneType' object has no attribute 'set_state'
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1821>
```
File "/../gstreamer/subprojects/gst-examples/webrtc/sendrecv/gst/webrtc_sendrecv.py", line 189, in <module>
loop.run_until_complete(c.connect())
File "/usr/lib64/python3.10/asyncio/base_events.py", line 641, in run_until_complete
return future.result()
File "/../gstreamer/subprojects/gst-examples/webrtc/sendrecv/gst/webrtc_sendrecv.py", line 40, in connect
self.conn = await websockets.connect(self.server, ssl=sslctx)
File "/home/nirbheek/.local/lib/python3.10/site-packages/websockets/legacy/client.py", line 650, in __await_impl_timeout__
return await asyncio.wait_for(self.__await_impl__(), self.open_timeout)
File "/usr/lib64/python3.10/asyncio/tasks.py", line 445, in wait_for
return fut.result()
File "/home/nirbheek/.local/lib/python3.10/site-packages/websockets/legacy/client.py", line 654, in __await_impl__
transport, protocol = await self._create_connection()
File "/usr/lib64/python3.10/asyncio/base_events.py", line 1080, in create_connection
transport, protocol = await self._create_connection_transport(
File "/usr/lib64/python3.10/asyncio/base_events.py", line 1110, in _create_connection_transport
await waiter
File "/usr/lib64/python3.10/asyncio/sslproto.py", line 631, in _on_handshake_complete
raise handshake_exc
File "/usr/lib64/python3.10/asyncio/sslproto.py", line 676, in _process_write_backlog
ssldata = self._sslpipe.do_handshake(
File "/usr/lib64/python3.10/asyncio/sslproto.py", line 116, in do_handshake
self._sslobj = self._context.wrap_bio(
File "/usr/lib64/python3.10/ssl.py", line 526, in wrap_bio
return self.sslobject_class._create(
File "/usr/lib64/python3.10/ssl.py", line 865, in _create
sslobj = context._wrap_bio(
ssl.SSLError: Cannot create a client socket with a PROTOCOL_TLS_SERVER context (_ssl.c:801)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1821>
asyncio.get_event_loop() will not implicitly create a new event loop
in a future version of Python, so we need to do that explicitly.
```
webrtc_sendrecv.py:188: DeprecationWarning: There is no current event loop
loop = asyncio.get_event_loop()
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1821>
If the tracks element was parsed from the SeekEntry, don't
parse it a second time and recreate tracks, as this
loses any tags that were read using the seek table.
If a genuinely new Tracks element is found, do read that
as it is needed for MSE support.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
Remove the symbolic link `gst-uninstalled` which points to `gst-env`.
The `uninstalled` is the old name and the project should stick to a
single name for the procedure.
Remove the term from all the files, exceptions are variables from
dependencies like `uninstalled_variables` from pkgconfig and
`meson-uninstalled`.
Adjust mentions of the script in the documentation and README.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
Do not maintain similar build instructions within each gst-plugins-*
subproject and the subproject/gstreamer subproject. Use the build
instructions from the mono-repository and link to them via hyperlink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
This a new VA-API implementation of a H264 encoder.
It can control the GOP and parameter settings, while the MV searching,
VCL and the rate control algorithm are implemented by VA drivers and HW.
It supports most of the common usage options in H264, but still lacks
of look ahead, field, B frame weighted prediction, etc.
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
The g_queue_clear_full() and g_array_copy() functions in the glib
may not be available for the current glib version check, so we add
helper functions to wrap it.
This should be deleted after the glib version bumps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1051>
LOAD macro relies in m7 being zero for interleaving purposes. Using LOAD
on the m7 register makes it interleave with its new content instead of
with 0.
The effect of this bug was bobbing on some static lines that appeared
over fast-moving content.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1816>
The fd was in different meanings on windows:
POSIX read and write use the fd as a file descriptor.
The gst_poll use the fd as a WSASocket.
This patch use WSASocket as default on windows. This is a temporary measure, because IPC has many different implement. There may be a better way in the future.
See #1044
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1791>
The dynamic resolution changes when
the sequence starts when the decoder detects a coded frame with one or
more of the following parameters different from those previously
established (and reflected by corresponding queries):
1.coded resolution (OUTPUT width and height),
2.visible resolution (selection rectangles),
3.the minimum number of buffers needed for decoding,
4.bit-depth of the bitstream has been changed.
Although gstreamer parser has parsed the stream resolution.
but there are some case that we need to handle resolution change event.
1. bit-depth is different from the negotiated format.
2. the capture buffer count can meet the demand
3. there are some hardware limitations that the decoded resolution may
be larger than the display size. For example, the stream size is
1920x1080, but some vpu may decode it to 1920x1088.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
v4l2videodec do some refactoring so that it can support
dynamic resolution change event.
1.wrap the setup process of capture as a function,
as decoder need setup the capture again when
dynamic resolution change event is received.
2.move the function "remove_padding"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
This allows downstream of a payloader to know the RTP header's marker
flag without first having to map the buffer and parse the RTP header.
Especially inside RTP header extension implementations this can be
useful to decide which packet corresponds to e.g. the last packet of a
video frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1776>
osxaudiodeviceprovider now probes devices more than once to determine
if the device can function as both an input AND and output device.
Previously, if the device provider detected that a device had any output
capabilities, it was treated solely as an Audio/Sink. This causes issues
that have both input and output capabilities (for example, USB interfaces
for professional audio have both input and output channels). Such devices
are now listed as both an Audio/Sink as well as an Audio/Source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1385>
The RTP payload seems to be required as it carries the frame count
information. Also, gst_rtp_base_payload_allocate_output_buffer had
the second argument incorrect.
Strangely some devices like Shanling MP4 and Sony XM3 would still
work without this while some like the Sony XM4 do not.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1797>
While this is slightly more expensive (~48% slower per random number) it
does not cause any measurable difference when running through a complete
audio conversion pipeline.
On the other hand its random numbers are of much higher quality and on
spectrograms for 32 bit to 24 bit conversion the difference is clearly
visible.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1729>
The instant-rate value in the TrickMode enum is a
flag, but the other values are not. Move instant-rate
to the end of the enum and give it a value large enough
for it to be used without modifying the trick-mode
setting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1788>
Update x264enc long-name to be more than just the name. Then the
description also was updated to be longer than the long-name, and
similar to the plugin description.
Finally, as I am here, H264 was replaced by H.264 and x264 is only a
plugin (not plugins).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1771>
They can't be used in any useful way. The type of every GstMemory is
always GST_TYPE_MEMORY and the subtyping relationship has to be
implemented on top of that via the associated allocator and mem_type
string.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1764>
Scenario:
- Source 1 requesting and waiting a clock id
- Source 2 requesting and waiting on a clock id
- Test attempting to crank both sources in the same GstHarness
gst_test_clock_crank() originally dropped locks between the retrieving
of the next clock id and advancing to the next clock id. This would
mean that both sources would race each other attempting to complete
their clock waits. Sometimes the operations would be performed in the
correct order, other times they would not and a FALSE return value would
be produced.
This would lead to an assertion in gst_harness_push_from_src() expecting
that all clock cranks to succeed.
Fix by ensuring that the clock wait produced is dealt with before
processing the next by not dropping the relevant locks after retrieving
the next clock id.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1299>
This is a minimal unit test the show that the stride extrapolation can work
with all pixel format we support. This minimal verify that the extrapolation
match the stride we set into GstVideoInfo with 320x240 for all the pixel
format we support. The tiles formats are skipped, since their stride is
set as two 16bit integers, and we also skip over palette planes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
As this element is single threaded, we only need to stop the objects to
allow changing the format again. Fixes assertion notably on shutdown and
on some other situation where the format may be set twice without
actually activating the element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
Many of the legacy APIs, specifically in the Linux Kernel, have a
single stride for the pictures. In this context, it is common
to extrapolate the other strides based on the selected pixel
format. Such function have been copy pasted from video4linux2
plugin into wayland, kms and v4l2codecs plugins.
This patch implements a generalized from of that function and
make it available to everyone through the video library.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
Unlike other simple tiled formats, the Mediatek HW use different tile size
per-plane. The tile size is scaled according to the subsampling. Effectively,
using the name 16L32S to represent linearly layout tiles of size 16x32 bytes
in the Y plane, and 16x16 in the UV plane. In order to make this specificity
discoverable, a new SUBTILES flags have been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
If the video4linux device supports norms but has no norm set, norm is
returned as an uninitialized variable after the ioctl call, leading to
gst_v4l2_tuner_get_norm_by_std_id() returning a random norm from the
supported norms. Catch this case and instead return NULL to indicate
that no norm is setup.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1625>
We have the d3d11screencapturesrc element in d3d11 plugin
which is obviously better than this element in terms of performance
and design, so we don't need to make people be confused by two separate elements.
Let's pick the better implementation and remove unnecessary one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1750>
... instead of round(). Depending on framerate, calculated position
may not be clearly represented by using uint64, 30000/1001 for example.
Then the result of round() can be sliglhtly larger (1ns) than
buffer timestamp. And that will cause unnecessary frame delay.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1747>
It was assumed that the kernel parameters would match with the bitstream value
but instead the author when with another set of value. Surprisingly, this
makes no difference with the resulting fluster score.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1748>
If a serialized event arrives behind a buffer, it should not be send before
it. This fixes the pending event handling so that only early pending events,
the one that arrrived or was generated while the adapter was empty get send
before pushing buffer. All other events are not pushed after.
This issue lead the latency tracer to think our audio encoder did not have any
latency. This was testing with opusenc in a live pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1266>
Each stream may have its own segment timeline
(i.g., different segment.start or segment.base)
depending on edit-list and composition-to-decode atom.
Make sure whether time position of a stream has been actually
far behind than that of current target stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1352>
If present, add '-lsocket' and '-lnsl' to network_deps.
ext/curl/meson.build: add network_deps to dependencies
gst/festival/meson.build: same
sys/shm/meson.build: same
Fixes linking issues on Illumos distros.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1525>
Often, users will need to scale inputs (e.g.
with vaapipostproc) before they are submitted
to the vaapioverlay. However, this results in
multiple VPP passes/operations in the pipeline
which creates unnecessary process overhead.
This change allows for inputs to be submitted
at original scale to vaapioverlay with per-sinkpad
scale dimensions specified so they can be scaled
and blended/composited in a single VPP pass/operation
to avoid the unnecessary process overhead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1380>
Don't set VAAPI vpp blend flags if alpha == 1.0,
i.e. fully opaque. This can avoid extra processing
overhead on some drivers that apply blending
unconditionally when flags are present, even if the
end result is the same without blend flags (i.e. all
opaque alpha channels).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1380>
Note that AYUV and AYUV64 formats will be used to expand format
support, especially some packed YUV formats (e.g., Y410, YUY2)
are common DXGI formats used for hardware decoder/encoder on Windows
but those formats cannot be used as a render target. We need to handle
them differently without pixel shader help, using compute shader
for example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1699>
The libjpeg-turbo internal state might not be correctly initialized for
the first frame in a stream, pull the frame stride from gstreamer frame
metadata instead, which is correct even for the first frame, and which
makes this code consistent with the surrounding lines.
Fixes: e6d83d8f96 ("jpegdec: Support libjpeg-turbo colorspace conversion")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
It is imperative that the libjpeg-turbo state is properly initialized
before jpeg_start_decompress() is called. Make sure cinfo.out_color_space
and cinfo.raw_data_out are set to their final values matching their peer
caps before calling jpeg_start_decompress().
Fixes: e6d83d8f96 ("jpegdec: Support libjpeg-turbo colorspace conversion")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
Pull out peer caps checking code into gst_jpeg_turbo_parse_ext_fmt_convert().
This code is used by libjpeg-turbo extras to determine whether peer is capable
of handling buffers into which libjpeg-turbo can directly decode data. This
kind of check must be performed before jpeg_start_decompress() is called in
gst_jpeg_dec_prepare_decode() as well as in gst_jpeg_dec_negotiate(), hence
the common code.
This commit does modify the code a little to make it easier to call from both
call sites without much duplication, hence the extra `if (*clrspc)` test.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
This reverts commit 2aa2477208.
The commit is completely wrong, libjpeg-turbo is perfectly capable
of decoding I420 (YUV) to RGB. The test case provided alongside the
aforementioned commit passes without this revert because it decodes
image of JCS_YCrCb color space, so the new `if (clrspc == JCS_RGB)`
condition is false on that image, and the libjpeg-turbo decoding
does not get used. The real bug is hidden by that commit.
The real problem is in the call order of gst_jpeg_dec_prepare_decode()
and gst_jpeg_dec_negotiate(). The gst_jpeg_dec_prepare_decode() calls
jpeg_start_decompress() which sets up internal state of the libjpeg,
however, neither cinfo.out_color_space nor cinfo.raw_data_out are
set correctly yet. Those two are set up in gst_jpeg_dec_negotiate()
which is called a bit later. Therefore, the real fix is the set up
cinfo.out_color_space and cinfo.raw_data_out before calling
jpeg_start_decompress(). This is however a separate patch.
Fixes: 2aa2477208 ("jpegdec: only allow conversions from RGB")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
Remove all the d3d11 and dxgi header version dependent ifdef
and bump the minimum requirement to d3d11_4.h and dxgi1_6.h.
We are already failing support old Visual Studio (Windows SDK actually)
such as Visual Studio 2015. Note that our MinGW toolchain satisfies
the requirement.
From runtime point of view, this change should be fine since
we are checking OS version with IUnknown::QueryInterface()
everywhere in order to check API availability
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1684>
We make all MSDK encoders declare "memory:VAMemory" feature. Then
the pipeline such as:
gst-launch-1.0 -vf filesrc location=xxx.h264 ! h264parse ! \
vah264dec ! msdkh265enc ! fakesink
will choose VA memory caps between the VA decoder and MSDK encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
The MSDK encoder's query function is not set and it just forwards
all query to its base class. We now need to answer the context
query correctly. Other VA plugins need to query the VA display.
By the way, the current query of "gst.msdk.Context" is also missing.
The other MSDK elements must depend on the bin's context message(
sent in context_propagate()) to set their MsdkContext correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
The MSDK VPP's query function is not set and it just forwards
all query to its base class. We now need to answer the context
query correctly. Other VA plugins need to query the VA display.
By the way, the current query of "gst.msdk.Context" is also missing.
The other MSDK elements must depend on the bin's context message(
sent in context_propagate()) to set their MsdkContext correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
The MSDK decoder's query function is not set and it just forwards
all query to its base class. We now need to answer the context
query correctly. Other VA plugins need to query the VA display.
By the way, the current query of "gst.msdk.Context" is also missing.
The other MSDK elements must depend on the bin's context message(
sent in context_propagate()) to set their MsdkContext correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
We now can use the gst va lib's display to create our MSDK context,
and use its helper functions to simplify our code. The improved logic
is like this:
1. Every MSDK element should use gst_msdk_context_find() to find a MSDK
context from neighbour. If valid, reuse it.
2. Use gst_msdk_ensure_new_context(). It will first query neighbours
about the GstVaDisplay, if found(e.g. some VA element is connected),
use gst_msdk_context_from_external_display() to create a MSDK context.
3. Then, creating the MSDK context from scratch. It creates both the
display and MSDK context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
The VA display object from VA lib is a common defined object. which
contain the whole display things. It is easier to use, and more important,
we can share it with the other VA plugins and keep all the VA related
plugins working on the same GPU device.
We also delete the useless gst_msdk_context_get_fd() API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1087>
The current manner for deciding the new temporal unit is based on
temporal delimiter(TD) OBU. We only start a new temporal unit when
the TD comes.
But some streams do not have TD at all, which makes the output "TU"
alignment fail to work. We now add check based on the relationship
between the different layers and it can successfully judge the TU edge.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1634>
Some streams may have problematic OBUs at the beginning, which causes
the parse fail to detect the alignment and return error. For example,
there may be verbose OBUs before a valid sequence, which should be
discarded until we meet a valid sequence. We should let the parse
continue when we meet such cases, rather than just return error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1634>
Our D3D11/DXVA codecs implementation has been verified
during 1.18 and 1.20 development cycle and also via the Fluster
test framework. Similar to the case of nvdec and vtdec,
we can prefer hardware over software in most cases
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1672>
For artificial input (in unit tests), all six bytes of
constraint_indicator_flags in hevc_caps_get_mime_codec() can be
zero. Add a guard against an out-of-bounds error that occurred in that
case. Change variables to signed int so comparison with -1 works.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1677>
Duplicating a picture what was already a dup was leading to a crash. Rename
the custom picture flags as HOLDS_BUFFER to make its meaning clear. Then save
then ref and store the picture as userdata, so it can be obtained when
duplicating. Finally, mark the doplicated as HOLDS_BUFFER to avoid thinking it
holds a request.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1681>
This patch adds a new parameter: hdr-tone-mapping (same as
vaapipostproc), if the HDR capabilites are availabe in driver, and
it's disabled by default.
If hdr-tone-mapping is enabled then HDR fields in sink caps are
processed in frames from HDR to SDR, removing those hdr fields in
source pad caps too.
hdr-tone-mapping is not enabled if a color conversion is also
requested, since it fails to process in the iHD driver, so far.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1258>
