silences the following warnings from the validation layer
AccessMask xxx must have required access bit xxx and may have optional bits 0
when layout is VK_IMAGE_LAYOUT_TRANSFER_{SRC,DST}_OPTIMAL
It's possible that the sink element will be freed before the widget is
destroyed. When the widget was eventually destroyed, it was attempting to
access member variables of the freed sink struct which resulted in undefined
behaviour.
Fix by disconnecting our signal on finalize.
https://bugzilla.gnome.org/show_bug.cgi?id=762098
This allow adding rtmpsink after the flv streaming have started. Otherwise,
FLV streamheader is never sent to the server, which cannot figure-out
what is this stream about. It should also help in certain renegotiation
figures. The sink will no longer work without an streamheader in caps,
though there is no known implementation of flvdemux that does not
support this.
https://bugzilla.gnome.org/show_bug.cgi?id=760242
stream->current_fragment has the value of g_list_previous (iter) which has
just been checked. No need to check it again.
Just to be safe, use a g_assert() to check fragment before dereferencing.
CID #1352041
The function actually returns the segment availability start time (as defined by the standard).
That is at the end of the segment, but it is called availability start time.
Availability end time is something else (the time when the segment is no longer
available on the server). The function name was misleading.
https://bugzilla.gnome.org/show_bug.cgi?id=757655
CPU waits are more expensive and are only required if the CPU is ever going to
access the data. GPU waits perform inter-context synchronisation and are cheaper
as they don't require CPU intervention.
Adaptive demuxers need to start downloading from specific positions
(fragments) for every stream, this means that all streams can snap-seek
to a different position when requested. Snap seeking in this case will
be done in 2 steps:
1) do the snap seeking on the pad that received the seek event and
get the final position
2) use this position to do a regular seek on the other streams to
make sure they all start from the same position
More arguments were added to the stream_seek function, allowing better control
of how seeking is done. Knowing the flags and the playback direction allows
subclasses to handle snap-seeking.
And also adds a new return parameter to inform of the final
selected seeking position that is used to align the other streams.
https://bugzilla.gnome.org/show_bug.cgi?id=759158
FEC may only be used when PLC is enabled on the audio decoder,
as it relies on empty buffers to generate audio from the next
buffer. Hooking to the gap events doesn't work as the audio
decoder does not like more buffers output than it sends.
The length of data to generate using FEC from the next packet
is determined by rounding the gap duration to nearest. This
ensures that duration imprecision does not cause quantization
to 2.5 milliseconds less than available. Doing so causes the
Opus API to fail decoding. Such duration imprecision is common
in live cases.
The buffer to consider when determining the length of audio
to be decoded is the previous buffer when using FEC, and the
new buffer otherwise. In the FEC case, this means we determine
the amount of audio from the previous buffer, whether it was
missing or not (and get the data either from this buffer, or
the current one if the previous one was missing).
Was never ported and doesn't look like
we want it or need it in this form, can
do the same with the libgstvideo sample
conversion utility API now, but better
and in a more flexible way.
Just check whether LATM is defined which is only available
in 2.7 and later. Allows us to simplify the configure check
a little and we can get rid of some hackish workarounds for
problems with earlier version headers.
On some embedded systems, sqrt() is not supported in the shader,
use the actual value of sqrt(2) instead.
Signed-off-by: Haihua Hu <b55597@freescale.com>
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=761271
Allows the subclass to completely override the chosen src caps.
This is needed as videoaggregator generally has no idea exactly
what operation is being performed.
- Adds a fixate_caps vfunc for fixation
- Merges gst_video_aggregator_update_converters() into
gst_videoaggregator_update_src_caps() as we need some of its info
for proper caps handling.
- Pass the downstream caps to the update_caps vfunc
https://bugzilla.gnome.org/show_bug.cgi?id=756207
1. Otherwise rotating the video will clip and show black bars due to
gltransformation's implementation.
2. The other option of make gltransformation aspect-agnostic produces
incorrect output with perspective transformations.
Add a "mask" property that sets whether the edges by cvLaplace should be
used as a mask on the original input or not. The same way the original
image is copied to the edges in edgedetect.
Add a "mask" property that sets whether the detected derivative edges
should be used as a mask on the original input or not. The same way
the original image is added to the edges in edgedetect.
cvCvtPixToPlane() has been deprecated in OpenCV 3.0, and cvSplit() is the
suggested replacement. Since cvSplit() is available in OpenCV 2.4, it is
safe and cautious to update the function usage before it becomes an issue.
cvlaplace was also affected by the silent change in OpenCV API, same as
cvsobel. It hasn't been working for a while. It would return a plain black
image. This commit updates the usage of cvLaplace by using cvCvtColor to
create the grayscale intermediate image to process. This also means there
is no need anymore to use GstBaseTransform's transform_caps, since the pads
are RGB.
cvsobel han't been working for a while due to a silent change in OpenCV
API. It would return a plain black image. This commit updates the usage
of cvSobel by using cvCvtColor to create the grayscale image to process.
This also means there is no need to use GstBaseTransform's transform_caps
anymore, since the pads can be RGB.
In file included from effects/gstgleffectrgbtocurve.c:25:0:
effects/gstgleffectscurves.h:174:32: error: 'xray_curve' defined but not used
static const GstGLEffectsCurve xray_curve = {
...
For a live mpd, if availabilityStartTime is missing, adaptive demux asserts
with: Unexpected critical/warning: gst_date_time_to_g_date_time: assertion
'datetime != NULL' failed.
This patch improves the error message to:
Unexpected critical/warning: gst_mpd_client_seek_to_time: assertion
'client->mpd_node->availabilityStartTime != NULL' failed
https://bugzilla.gnome.org/show_bug.cgi?id=757602
Handling the ghostpad and its internal pad was causing more issues
than helping because of their coupled activation/deactivation
actions.
As we have to install custom chain,event and query functions it is
better to use a floating sink pad internally in the demuxer and just
use those pad functions to push through a standard pad in the demuxer
https://bugzilla.gnome.org/show_bug.cgi?id=757951
Reverses the transformation applied through the properties and forwards the
event.
The process for finding the coordinates on the video are as follows:
1. Convert the given pointer_x and pointer_y to model space at the near and far planes
2. Get the equation of the video plane
3. Find where the ray in 1 intersects the plane
4. Profit!
It performs the exact same operation as videobalance but with opengl shaders and
was tested with glvideomixer by comparing frames from videobalance and
glcolorbalance.
Allows more blending options than just A over B
e.g. frame comparisons are now possible.
glvideomixer name=m
sink_0::zorder=0
sink_1::zorder=1
sink_1::blend-equation-rgb={subtract,reverse-subtract}
sink_1::blend-function-src-rgb=src-color
sink_1::blend-function-dst-rgb=dst-color
! glimagesinkelement
videotestsrc pattern=checkers-4 ! m.sink_0
videotestsrc pattern=checkers-8 ! m.sink_1
SBC frame length calculation wasn't being rounded up to the nearest byte
(as specified in the A2DP 1.0 specification, section 12.9). This could
cause 'stereo' and 'joint stereo' mode SBC streams to have incorrectly
calculated frame lengths.
https://bugzilla.gnome.org/show_bug.cgi?id=742446
After commit 64080e632, configure checks for all the header files that
should be available in OpenCV 2.3 and later. If any of these files isn't
there the OpenCV elements won't be part of the build.
No need to recheck for opencv2/legacy/legacy.hpp again in
gstpyramidsegment.h. Minimum supported OpenCV version must have this header
and configure already checks for it. Removing check.
Run the transform function of pyramidsegment in place, reusing the image
data as both source and destination in cvPyrSegmentation. This avoids
copying the image back and forth and the extra memory.
Properly handle snap flags during reverse seeking. In this case
the before/after are also reversed, so handle those as such.
For example: with a sequence of 1s fragments:
|-- 0 --|-- 1 --|-- 2 --|-- 3 --|
If you seek to 1.5s it is inside fragment 1. With reverse and
snap-before: should play from the end of fragment 1
snap-after: should play from the end of fragment 0
Avoids an unlikely crash.
Arguably, if allocation fails we have no chance of
recovering but nonetheless, RTMP_Alloc can fail and
librtmp's RTMP_init() (called next) assumes a non-NULL
pointer is passed without checking.
Additionally, unify exit path on error.
Avoids an unlikely crash.
Arguably, if allocation fails we have no chance of
recovering but nonetheless, RTMP_Alloc can fail and
librtmp's RTMP_init() (called next) assumes a non-NULL
pointer is passed without checking.
Additionally, unify exit path on error.
All the gleffects shaders can be run against a gles2 or a legacy opengl glsl
compiler but weren't being advertised as such.
Fixes gleffects under desktop opengl < 3.2.
The property location has been changed in favor of vertex/fragment
string properties; the doc had not been updated and was still referring
to the previous property; also, now the #version header has become mandatory
https://bugzilla.gnome.org/show_bug.cgi?id=759902
No need to attempt splitting the RGB string in 255 tokens
if we only expect 3.
Left max_tokens at 4 to preserve the current logic (which
allows for extra stuff at the end) and added a warning on
parsing failure instead of silently discarding the value.
The URI attribute from the EXT-X-KEY tag and the URI attribute from the
EXT-X-I-FRAMES-ONLY tag are both quoted-string attibutes that have their
quotation marks removed during parsing. The CODECS attribute of the
EXT-X-STREAM-INF is also a quoted-string attribute, but this attribute
was not being un-quoted.
This commit changes the parser to always unquote all quoted-string
attributes and adjusts the unit tests to this new bevahiour for the
CODECS attribute.
An additional test is added to check that parsing of all of the fields
in the EXT-X-STREAM tag is correct, including those that contain comma
characters.
https://bugzilla.gnome.org/show_bug.cgi?id=758384
Clear error as soon as we determine that the download failed,
otherwise there are code paths where we might return without
clearing it ever, which would leak the GError then. Also, we
can pass a NULL GError pointer to _fetch_uri(), so just do that
instead of passing one that we're going to just free again
right away anyway.
Adds more meaningful error than
"Failed to convert multiview video buffer", which is always used
when prepare_next_buffer() fails in gst_glimage_sink_prepare().
https://bugzilla.gnome.org/show_bug.cgi?id=743345
Update opencvtextoverlay to inherit from GstOpencvVideoFilter instead of
from GstElement. This means less code and more uniformity with other OpenCV
elements. The chain/transform function is now a third of the size than
before.
Update pyramidsegment to inherit from GstOpencvVideoFilter instead of from
GstElement. This means less code and more uniformity with other OpenCV
elements.
Update pyramidsegment to inherit from GstOpencvVideoFilter instead of from
GstElement. This means less code and more uniformity with other OpenCV
elements.
Update motioncells to inherit from GstOpencvVideoFilter instead of from
GstElement. This means less code and more uniformity with other OpenCV
elements.
Add gst_gl_memory_allocator_get_default to get the default allocator based on
the opengl version. Allows us to stop hardcoding the PBO allocator which isn't
supported on gles2.
Fixes GL upload on iOS9 among other things.
Performing any GL function marshalling off the GL thread with glimagesink's
render lock is prone to deadlocks between the GL thread and the non-GL thread.
What can happen is this:
1. non-GL thread attempts to function marshal to the GL thread.
2. while 1 is happening, the winsys gives an event (say resize)
3. This calls back into glimagesink which taks the render lock.
4. As the GL function marshalling is attempting to run on the GL
and already has glimagesink's render lock locked. This deadlocks
as the threads are waiting for each other.
Update edgedetect to inherit from GstOpencvVideoFilter instead of from
GstElement. This means less code and more uniformity with other OpenCV
elements.
Adding the support for the two other OpenCV linear filters to smooth
images. The new API does support spatial sigma in the bilateral filter,
hence bringing that property back.
Adding reference to new documentation.
The OpenCV cvSmooth function is deprecated [0] and the documentation
recommends to use GaussianBlur (). This makes the spatial property go
unused. Marking it as deprecated, making it non-functional and will remove
in the next cycle.
[0] http://docs.opencv.org/2.4/modules/imgproc/doc/filtering.html
gst_mpdparser_parse_utctiming_node does not validate the parsed values completely. The following scenarios are incorrectly accepted:
- elements with no schemeIdUri property should be rejected
- elements with unrecognized UTCTiming scheme should be rejected
- elements with empty values should be rejected
The last one triggers a division by 0 in gst_dash_demux_poll_clock_drift:
clock_drift->selected_url = clock_drift->selected_url % g_strv_length (urls);
because it urls is a valid pointer to an empty array.
https://bugzilla.gnome.org/show_bug.cgi?id=759547
We don't directly link to GL in the element, though we use GL headers.
For this reason we need to include the proper GL headers path. This
prevent this element from using a different GL header then libgstgl.
rename gst-launch --> gst-launch-1.0
replace old elements with new elements(ffmpegcolorspace -> videoconvert, ffenc_** -> avenc_**)
fix caps in examples
https://bugzilla.gnome.org/show_bug.cgi?id=759432
The base class is useful for having multiple backing memory types other
than the default. e.g. IOSurface, EGLImage, dmabuf?
The PBO transfer logic is now inside GstGLMemoryPBO which uses GstGLBuffer
to manage the PBO memory.
This also moves the format utility functions into their own file.
The opencv element includes were full of duplicates and uneeded headers.
For example a few elements that stopped using gstcvopencvutils still
included that header file.
Since commit 45ca8876b2 nobody is using
gst_opencv_get_ipl_depth_and_channels() or
gst_opencv_parse_iplimage_params_from_structure(). Remove this dead
code.
Setting the seek flags to GST_SEEK_FLAG_SNAP_* will change the seek
target time to a segment boundary.
Based on original work by Ben Willers <bwillers@digisoft.tv>.
https://bugzilla.gnome.org/show_bug.cgi?id=759108
Dashdemux has set the width and height information from MPD manifest.
Some embedded devices which are not insufficient H/W resources need more information such as framerate
to assign H/W resources. So I suggested that dashdemux also needs to set the framerate information from MDP manifest.
https://bugzilla.gnome.org/show_bug.cgi?id=758515
As HLS does not provide any way of knowing the server's clock, and we do
buffering of "live" streams, at some point we will fall behind the server in
many cases and would have to advance to a fragment that is not in the playlist
anymore.
Previously we would've just resynced to the next oldest fragment that is still
there, but this causes problems as from this point onwards we would always
fall off the playlist again all the time.
Instead we now resync and move to the 3rd newest fragment like we would do
when starting playback of a live stream.
https://bugzilla.gnome.org/show_bug.cgi?id=758987
If connection speed is set, playlist according
to connection speed is selected as current playlist.
Problem is that the current variant of main playlist still
points to previously set variant.
If previously set variant doesn't correspond to current
playlist, then it causes unnecessary change of playlist
to the same playlist after first fragment is downloaded,
because of not updated current variant.
To fix this, we need to make sure that current variant
of main playlist corresponds to the current playlist
https://bugzilla.gnome.org/show_bug.cgi?id=758946
Don't jump backward to 3 files from the end of the playlist
when switching variants - it just means we downloaded
fragments fast and caught up to the end of the playlist.
Disable that by treating a variant switch as a playlist
update, not a restart due to a seek or so.
If the stream is discont, we must provide a timestamp in any case. Elements
like tsdemux are not going to output anything if we give a NONE timestamp
after a discont.
Also marking a stream as discont if a playlist change was not successful would
lead to the above situation, but in that case we are not required at all to
mark the stream discont as we're still at the old playlist.
commit da5c41930c removed the two uses of the
new value of data:
channels = opus_packet_get_nb_channels (data);
bandwidth = opus_packet_get_bandwidth (data);
Since then, data isn't being used between incrementing it by packet_offset
and going out of scope. Removing this uneeded statement.
The scene graph can be initialized when the we receive window handle change
notification and so we will not receive a scenegraph initialization
notification. Initialize ourself in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=758337
The result of the two expressions will be promoted to guint64 anyway,
perform all the arithmetic in 64 bits to avoid potential overflows.
CID 1338690, CID 1338691
sample_rate might be used uninitialized if !sink_caps is TRUE. Initialize
it to the default used in gst_codec_utils_opus_parse_caps () when there is
no rate defined in the caps.
CID 1338695
There is a possibility that the _get_caps impl will be called with the
feature in the filter caps which when interecting with the template,
will return EMPTY and therefore fail negotiation.
https://bugzilla.gnome.org/show_bug.cgi?id=757854
It's for the upstream element driving the pipeline to
handle seeks and send flush events or not, filters
should not interfere here, otherwise downstream pads
could be flushing before upstream pads are flushing,
which can result in GST_FLOW_ERROR being sent instead
of GST_FLOW_FLUSHING when trying to forward sticky
events at just the wrong moment.
No need to use G_GINT64_FORMAT for potentially negative values of
GstClockTimeDiff. Since 1.6 these can be handled with GST_STIME_FORMAT.
Plus it creates more readable values in the logs.
https://bugzilla.gnome.org/show_bug.cgi?id=757480
We always require the channel-mapping-field. If it's 0 we require nothing
else, otherwise we need channels, stream-count and coupled count to be
available.
oggdemux is outputting the meta now, and only outputs if it should really
apply to the current buffer. Previously we would skip N samples also if we
started the decoder in the middle of the stream.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
It is doing the wrong thing because of the Opus pre-skip: while the timestamps
are shifted by the pre-skip, the granule positions are not shifted.
oggmux is doing the right thing here already.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
The first frame has lookahead less samples, the last frame might have some
padding or we might have to encode another frame of silence to get all our
input into the encoded data.
This is because of a) the lookahead at the beginning of the encoding, which
shifts all data by that amount of samples and b) the padding needed to fill
the very last frame completely.
Ideally we would use LPC to calculate something better than silence for the
padding to make the encoding as smooth as possible.
With this we get exactly the same amount of samples again in an
opusenc ! opusdec pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=757153
Waylandsink needs exception code in gst_wayland_sink_set_window_handle().
After making sink->window, User can call
gst_wayland_sink_set_window_handle(). It is the user's fault, but
Waylandsink needs to handle the exception, if not then sink->window is
changed and rendering fails.
https://bugzilla.gnome.org/show_bug.cgi?id=747482
Waylandsink needs exception code in gst_wayland_sink_set_context(). After
calling gst_wayland_sink_set_context(), below code is set.
GST_ELEMENT_CLASS (parent_class)->set_context (element, context); but, If
user can call onemore. It is user's fault. but waylandsink need to
exception.
https://bugzilla.gnome.org/show_bug.cgi?id=747482
The stream->cur_seg_template is set to the lowest available segment
template (representation or adaptation or period, in this order).
Because the template elements are inherited, the lowest template will
have all the elements the parents had, so there is no need to check the
parent for an element that is not found in the child (eg initialisation
or index).
https://bugzilla.gnome.org/show_bug.cgi?id=752714
The standard does not seem to make any particular explicit not
implicit reference to the signedness of durations, and the code
does not rely on such, nor on the negativity of the -1 value
that's used as a placeholder when a duration property is not
present in the XML.
https://bugzilla.gnome.org/show_bug.cgi?id=750847
According to the standard:
"SegmentBase, SegmentTemplate and SegmentList shall inherit
attributes and elements from the same element on a higher level.
If the same attribute or element is present on both levels,
the one on the lower level shall take precedence over the one
on the higher level."
gst_mpdparser_parse_segment_list_node will now discard any inherited
segment URLs if the parsed element defines some too.
https://bugzilla.gnome.org/show_bug.cgi?id=751832
Solved with a simple shader templating mechanism and string replacements
of the necessary sampler types/texture accesses and texture coordinate
mangling for rectangular and external-oes textures.
Add the various tokens/strings for the differnet texture types (2D, rect, oes)
Changes the GLmemory api to include the GstGLTextureTarget in all relevant
functions.
Update the relevant caps/templates for 2D only textures.
If MPD@suggestedPresentationDelay is not present in the manifest,
dashdemux selects the fragment closest to the most recently generated
fragment. This causes a playback issue because this choice does not allow
the DASH client to build up any buffer of downloaded fragments without
pausing playback. This is because by definition new fragments appear on
the server in real-time (e.g. if segment duration is 4 seconds, a new
fragment will appear on the server every 4 seconds). If the starting
playback position was n*segmentDuration seconds behind "now", the DASH
client could download up to 'n' fragments faster than realtime before it
reached the point where it needed to wait for fragments to appear on the
server.
The MPD@suggestedPresentationDelay attribute allows a content publisher
to provide a suggested starting position that is behind the current
"live" position.
If the MPD@suggestedPresentationDelay attribute is not present, provide
a suitable default value as a property of the dashdemux element. To
allow the default presentation delay to be specified either using
fragments or seconds, the property is a string that contains a number
and a unit (e.g. "10 seconds", "4 fragments", "2500ms").
Corrected the parsing of a segment template string.
Added unit tests to test the segment template parsing.
All reported problems are now correctly handled.
https://bugzilla.gnome.org/show_bug.cgi?id=751735
When building the media segment list using a SegmentList node, the
gst_mpd_client_setup_representation function will iterate through the
list of S nodes and will expect to find a matching SegmentUrl node. If
one does not exist, the code made an illegal memory access.
https://bugzilla.gnome.org/show_bug.cgi?id=752496
These are used to apply restrictions on what the MPD file may
use, so no profile means no restrictions.
Besides, nothing actually uses the profiles (yet) anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=750869
This wl_display proxy is temporary only until waylandsink goes NULL,
at which point the connection to the display is disposed. Unfortunately,
if this is advertised as a GstContext, playbin will cache it and re-feed
it to the sink when it goes PLAYING again, but the wl_display pointer
will at that point be invalid and cause a crash.
Another solution to the problem would be to also cache the GstWlDisplay
object inside the GstContext, which would automatically ref-count
the display connection, but I see no reason in doing that at the moment,
as there are no known users of this GstContext outside waylandsink.
It's probably better to avoid chasing hidden refcounts.
https://bugzilla.gnome.org/show_bug.cgi?id=756567
If a (master) playlist contains a variant list entry without a
URI then during parsing of the next variant list entry we are
a) leaking the entry we're currently parsing (new_list), and
b) free'ing the pointer to the previous list entry (list) without
updating the pointer.
Hence when then adding the URI for the latest parsed entry, incorrect
information is stored, as the information is used from 'list' which
is not valid memory anymore, also leading to crashes.
Fix this by correctly storing the new variant list entry pointer
as needed.
https://bugzilla.gnome.org/show_bug.cgi?id=756861
Nicer to read, two lines of code less, and also the callback
function should've been a GCompareFunc that returns a gint
and not a boolean (it did work correctly, was just confusing).
Currently float and int are supported by default. vec2, vec3, vec4
and mat4 are supported if graphene is used. Of course if one wants
to set custom uniforms they can also be set using the create-shader
signal.
We know that the gchar arrays contain at least one string. Furthermore,
g_strfreev() checks if the array is NULL and simply returns if it is.
Hence, there is no need to check if the array is empty before using
g_strfreev().
CID 1327412-1327415
In order to ensure the sequence_position will always be consistently updated,
store the current file duration.
This way, when we advance, we can always increment the position based on what
was previously outputted.
https://bugzilla.gnome.org/show_bug.cgi?id=752132
One may not have an GstGLContext available or current in the thread where one
would need to update the shader. Support this by signalling create-shader
whenever the one-shot 'update-shader' is set to TRUE.
A GstGLShader is now simply a collection of stages that are
compiled and linked together into a program. The uniform/attribute
interface has remained the same.
Allows playlists that are missing the mediasequence information to
be correctly parsed. If the playlist was updated without reseting
the mediasequence it would constantly increase over subsequent updates,
leading to issues during playback.
For live streams, we want to make sure there's a certain distance
between the sequence to play and the last (earliest) fragment.
The problem is that it assumes there are at least 3 fragments in
the playlist, which might not always be the case (like in the case
of a server restarting and gradually adding fragments).
In order to avoid ending up with negative sequence numbers (which
will just loop forever), limit the new target sequence number to
the highest of:
* either the first sequence number of the playlist (fallback)
* or 3 fragments from the last one (standard behaviour)
Change the gstcvdilate.c file extension to cpp and add it into Makefile for
consistency with other elements of opencv and because Opencv not support C
language in new API 2.4.11.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
Change the file extension to cpp and add it into Makefile for consistency
with other elements of opencv and because Opencv not support C language in
new API 2.4.11.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
Change the file extension to cpp and add it into Makefile for consistency
with other elements of opencv and because Opencv not support C language in
new API 2.4.11.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
Change the gstretinex.c file to cpp and add it into Makefile.
It is necessary to migrate the retinex element to C++,
because new Opencv API leaves obsolete functions like cvSmooth.
This element uses this function.
You can see in this link:
http://docs.opencv.org/modules/imgproc/doc/filtering.html?
highlight=cvsmooth#void cvSmooth(const CvArr* src, CvArr* dst,
int smoothtype, int size1, int size2, double sigma1, double sigma2)
https://bugzilla.gnome.org/show_bug.cgi?id=754148
The cascade classifier changes its structure on new version of OpenCV 2.4.11.
It is need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the old and new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=752528
Change the gsthanddetect.c file to cpp and add it into Makefile.
It is necessary to migrate the handdetect plugin to C++,
in order to load new and old classifiers, to make handdetect work
with newer versions of Opencv.
https://bugzilla.gnome.org/show_bug.cgi?id=752528
This is mostly a copy/paste of the negotiation function in
basetextoverlay, which was improved recently to handle many more cases.
This will allow us to negotiate a window size with downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=753824
Doing the contrary has no effect and the consequence is that playback
will start with the lowest bitrate even if we can already handle
higher bitrate.
https://bugzilla.gnome.org/show_bug.cgi?id=755108
Not doing this can lead the demuxer to attempt downloading fragments
for an invalid start time. The server would then send a HTTP
Precondition failed error, the demuxer would try some more times to
download the invalid fragment and eventually error out.
https://bugzilla.gnome.org/show_bug.cgi?id=754523
Move the TAG defines directly into the code, not sure what
their purposes is, these are printf format strings so having
them directly as literals in the code where they're used
makes the code easier to follow.
Remove playlist_str GString variable from GstM3U8Playlist struct,
since it's only used temporarily in playlist_render(). Might just
as well keep it local then.
Transform is set to be done in place in gstcvdilateerode.c, so the in-place
transform function is always used and the other is redundant. Removing it.
https://bugzilla.gnome.org/show_bug.cgi?id=753885
Transform is set to be done in place in gstcvdilateerode.c, so the in-place
transform function is always used and the other is redundant. Removing it.
https://bugzilla.gnome.org/show_bug.cgi?id=753885
When running GStreamer from uninstalled sources, the location of the haar
cascade files will be local. Check if running in uninstalled and set the
file paths accordingly.
Move handling of a GstSample in a separate function, and unref the
sample after calling it. libass copies the font data so we don't need to
keep it around.
https://bugzilla.gnome.org/show_bug.cgi?id=755759
Ignore the normal gap threshold for laggy streams and
immediately catch all streams up to the end of the segment
when processing gap updates for a segment during a
still frame sequence.
https://bugzilla.gnome.org/show_bug.cgi?id=755680
Create src pads for Representations that contain timed-text subtitles,
both when the subtitles are encapsulated in ISO BMFF (i.e., the
Representation has mimeType "application/mp4") and when they are
unencapsulated (i.e., the Representation has mimeType
"application/ttml+xml").
https://bugzilla.gnome.org/show_bug.cgi?id=747774
The same has to be done for AdaptationSet and SegmentList nodes still.
Also this does not correctly implement the semantics: by default Period (and
other nodes) should only be loaded when needed, not in the very beginning. We
need to implement lazy loading for them, which means adjusting
gst_mpd_client_setup_media_presentation().
https://bugzilla.gnome.org/show_bug.cgi?id=752230
gst_uri_join_strings() will return the second parameter if it is an absolute
URI. No need to do a (wrong) check if the URI is absolute or not beforehand.
https://bugzilla.gnome.org/show_bug.cgi?id=755134
In case the format changed fast and the pending format is different
than the currently set but the currently set is equal to the pending
one we could end up having mismatch between the finally set format
and the data stream format.
https://bugzilla.gnome.org/show_bug.cgi?id=755542
The spec defines these as signed in 5.3.9.6.1.
Since we don't support this behavior, warn and default to 0
(non repeating), which is the spec's default when the value
is not present.
https://bugzilla.gnome.org/show_bug.cgi?id=752480
Even if it doesn't actually advance the subfragment in the default way
for streams that have subfragments, it can help the base class to return
EOS when there is no more fragments instead of signaling it that it should
continue downloading.
https://bugzilla.gnome.org/show_bug.cgi?id=755042
This reverts commit 626a8f0a74.
This allows us to get the plain presentation offset and the period start time
separately. We have to adjust the timestamp by the presentation offset, but
the period start time should only adjust the stream time and running time.
https://bugzilla.gnome.org/show_bug.cgi?id=752409
This reverts commit e671ad25a9.
The timestamps should restart at 0 again for each period, but we have to
adjust the segment to map those timestamps to the actual stream time and
running time of that period.
Otherwise we would have timestamps that conflict with the ones from the tfdt
inside the MP4 container, which are restarting at 0 for each period.
https://bugzilla.gnome.org/show_bug.cgi?id=752409
In dash isombff profile the fragment is split into subframents where
bitrate switching is possible. Also take that into consideration
when checking if a stream has next fragments.
This GstStreamPeriod start value is expressed in nanoseconds,
and the glib time addition function expects microseconds.
There seems to have been a confusion with GstPeriodNode's start
field, which is expressed in milliseconds.
Additionally, add a warning if the timestamp modification did
not succeed, and NULL was returned.
The cvSmooth cvNot functions and do not have the correct input parameters.
Furthermore, cvSmooth function is not necessary for edge detection,
because the Canny function makes the step of smoothing the image.
And cvNot function is useless because there aren't changes if this
function is eliminated.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
The cascade classifier changes its structure on new version of OpenCV 2.4.11.
It is need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the old and new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
For PROP_PROFILE case that exist inside gst_face_blur_set_property
function loads the new XML file in the CvHaarClassifierCascade property
without first checking that it is released because maybe there is an XML
file previously loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Changes inside the gst_face_blur_load_profile function, the number of
input parameters and in lines where it is used due to it cannot be used
generically.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Change the gstfaceblur.c file to cpp and add it into Makefile.
It is necessary to migrate the faceblur plugin to C++,
in order to load new and old classifiers, to make faceblur work
with newer versions of Opencv.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Fix some very dubious code. The class methods should always
be set, and the instance-specific check should then be done
inside the method. For data_received that's there already, for
finish_fragment we need to add it.
https://bugzilla.gnome.org/show_bug.cgi?id=753937
Some live streams (eg youtube) don't remove fragments in order to allow
seeking back in time (live + vod).
When gst_m3u8_client_has_next_fragment is called, we are getting wrong fragment
because current_file points in first file of the fragments list resulting in
watching the stream from the beginning again.
This patch sets current_file to nth fragment for live streams, then on
gst_m3u8_client_has_next_fragment will keep up with the live stream.
https://bugzilla.gnome.org/show_bug.cgi?id=753344
This allow properly copying selected meta, like the composition
overlay. Note that output buffer need to be readable, but GlUpload
keeps a ref. For now, simply drop GlUpload ref after perform,
leaving that ref has no purpose. The method shall be removed
in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=754047
Use base class default method instead of only copying flags and
timestamp. This way, selected meta's like compostion overlay will
be passed downstream as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=754047
During allocation query, when this element is not passthrough, it must
relay the overlay compostion meta and it's parameters. Fortunatly, base
transform can do this for us.
https://bugzilla.gnome.org/show_bug.cgi?id=753850
Previous patch did not handle the case where an encoding (e.g. UTF-8) is
specified in the <xml ?> element. Added an extra test for with and without
encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=753813
When running on an STB, the function
gst_mpdparser_get_xml_node_as_string causes a segmentation fault. This
code works correctly on a Linux desktop.
Looking at the libxml documentation, the xmlNodeDump is deprecated.
Replacing the use of xmlNodeDump with xmlNodeDumpOutput fixes the
segfault on the STB and removes the use of the deprecated function.
Some distributions store OpenCV files in /usr/share/opencv and some others
(and default when building from source) install them in
/usr/share/OpenCV. Support both to find cascade files.
https://bugzilla.gnome.org/show_bug.cgi?id=753651
It is faster than doing a query that propagates downstream and
should be enough
Elements: faac, gsmenc, opusenc, sbcenc, voamrwbenc, adpcmenc, sirenenc
When seeking to the last second of a mpd it would reject the seek
because the comparison was < instead of <=
This fails the important use case of seeking to the end of a file
to play it back in reverse from the end
We need to keep the active buffer (the one we have retreive a
texture id from) otherwise it's racy and upstream may upload
new content before we have rendered or during later redisplay.
The urn:mpeg:dash:utc:http-head:2014 method of time synchronisation
uses an HTTP HEAD request to a specified URL and then parses the
Date: HTTP response header.
This commit adds support to dashdemux for this method of time
synchronisation by making a HEAD request and then parsing the Date:
response.
This commit adds support to gstfragment to return the HTTP headers
and to uridownloader to support HEAD requests. To avoid creating a
new API, the RANGE get function is re-used (abused?) with start=-1
and end=-1 to indicate a HEAD request.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
This commit addresses the following items from the code review:
use a portable way to define NTP_TO_UNIX_EPOCH,
fix memory leak on error, and
add documentation to UTCTiming parse functions
Using LL is not portable, so the G_GUINT64_CONSTANT needs to be instead.
If an error occurs during DNS resolution, the GError was not being
released, causing a memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
Unless the DASH client can compensate for the difference between its
clock and the clock used by the server, the client might request
fragments that either not yet on the server or fragments that have
already been expired from the server. This is an issue because these
requests can propagate all the way back to the origin
ISO/IEC 23009-1:2014/Amd 1 [PDAM1] defines a new UTCTiming element to allow
a DASH client to track the clock used by the server generating the
DASH stream. Multiple UTCTiming elements might be present, to indicate
support for multiple methods of UTC time gathering. Each element can
contain a white space separated list of URLs that can be contacted
to discover the UTC time from the server's perspective.
This commit provides parsing of UTCTiming elements, unit tests of this
parsing and a function to poll a time server. This function
supports the following methods:
urn:mpeg:dash:utc:ntp:2014
urn:mpeg:dash:utc:http-xsdate:2014
urn:mpeg:dash:utc:http-iso:2014
urn:mpeg:dash:utc:http-ntp:2014
The manifest update task is used to poll the clock time server,
to save having to create a new thread.
When choosing the starting fragment number and when waiting for a
fragment to become available, the difference between the server's idea
of UTC and the client's idea of UTC is taken into account. For example,
if the server's time is behind the client's idea of UTC, we wait for
longer before requesting a fragment
[PDAM1]: http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=66068
dashdemux: support NTP time servers in UTCTiming elements
Use the gst_ntp_clock to support the use of an NTP server.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
This reverts commit ff11a1a8a0.
It can't be assumed that all buffers in a buffer list have the same SSRC or
are RTP or RTCP only. It has to be checked for every single buffer, and one
basically has to do the processing that is done by the default chain_list
implementation.
The current code was ignoring the par/dar aspect when transforming
from window coordinates to stream coordinates resulting in incorrect
coordinates being sent upstream in the navigation events.
