We cannot do it as the winsys may crash if we initialize too late.
Example, GLX contexts with Intel drivers:
Intel requires the X Display to be the same in order to share GL
resources across GL contexts. These GL contexts are generally
accessed from different threads. Without winsys support it is
nearly impossible to guarentee that concurrent access will not
occur. This concurrent access could result in crashes or abortion
by the winsys (xcb).
https://bugzilla.gnome.org/show_bug.cgi?id=731525
This drops the ugly GstWaylandWindowHandle structure and is much
more elegant because we can now request the display separately
from the window handle. Therefore the window handle can be requested
in render(), i.e. when it is really needed and we can still open
the correct display for getting caps and creating the pool earlier.
This change also separates setting the wl_surface from setting its size.
Applications should do that by calling two functions in sequence:
gst_video_overlay_set_window_handle (overlay, surface);
gst_wayland_video_set_surface_size (overlay, w, h);
This is the initial implementation, without the GstVideoOverlay.expose()
method. It only implements using an external (sub)surface and resizing
it with GstWaylandVideo.
This interface is needed to be able to embed waylandsink into
other wayland surfaces. Due to the special nature of wayland,
GstVideoOverlay is not enough for this job.
Fix routine names for zigzag/raster scan order conversion routines for
quantization matrices. This ought to use the gst_h264_quant_matrix_*()
naming convention instead of gst_h264_video_quant_matrix_*(), which
derived from the MPEG-2 function names.
https://bugzilla.gnome.org/show_bug.cgi?id=731524
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix MPEG-4 and VP8 APIs to export their external symbols as pure C
symbols, i.e. un-mangled for C++.
https://bugzilla.gnome.org/show_bug.cgi?id=731522
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The reshape property was never used.
Replace the draw property with a signal.
Based on patch by Mathieu Duponchelle <mathieu.duponchelle@epitech.eu>
https://bugzilla.gnome.org/show_bug.cgi?id=704507
Fixes a segfault with decodebin ! glmixer where the request pads on
both sides were being requested after the state change to PAUSED.
Also fixes dynamically adding and removing pads while glmixer is
in a state >= PAUSED.
Currently, GstGLWindowWaylandEGL holds the wayland display connection
If we create the EGLDisplay at the GstDisplay creation time, then
libEGL will internally open another connection to the wayland server.
These two display connections are unable to communicate resulting in
no window output/display and hangs inside libEGL.
Eventually we will move the wl_display from GstGLWindow to GstGLDisplay.
Fixes the case where _perform_with_buffer() is called without
intervening calls to _release_buffer() as is the case on start up
with glimagesink.
Also release the buffer when reseting the upload.
https://bugzilla.gnome.org/show_bug.cgi?id=731107
Fixes issues with .so (without numbering) being installed for development
(such as from mesa-dev) but actual driver (with numbering) coming from
some other place (like nvidia drivers)
ATSC has its own version of the EIT table (DVB also has one).
This patch adds parsing for the ATSC EIT table and also fixed
the section identification to mark it as the ATSC one.
The implementation aws refactored to reuse some common internal
structures from ETT.
Also adds its dumping function to ts-parser example
https://bugzilla.gnome.org/show_bug.cgi?id=730435
Adds the system time table structure and functions for convenient parsing of
it and for getting the UTC datetime that it represents. Also adds its
information dumping to the ts-parser example
https://bugzilla.gnome.org/show_bug.cgi?id=730435
ETT (extended text table) contains ATSC text information with descriptions
of virtual channels and events. The text can be internationalized and also
compressed.
https://bugzilla.gnome.org/show_bug.cgi?id=730435
Add a parsing function for MGT and also detect the EIT tables
for ATSC, the EIT pids are reported inside the MGT and we are still
only relying only on the table id for detecting it. In the future we
would want to also check the pid and compare with whatever the MGT
previously reported to confirm that it is indeed the EIT.
https://bugzilla.gnome.org/show_bug.cgi?id=730435
Make the ATSC section parse handle both TVCT and CVCT as they are
nearly the same struct (CVCT uses 2 reserved bits that are ignored
in TVCT).
This is changing the glib type and the struct name but TVCT wasn't
released in a stable package yet so there should be no problem.
Also includes some parsing fixes and changes short_name to be
directly stored as utf8 rather than utf16
https://bugzilla.gnome.org/show_bug.cgi?id=730642
Before:
GST_GL_PLATFORM=cocoa GST_GL_WINDOW=cocoa
gst-launch-1.0 videotestsrc ! glimagesink
After:
GST_GL_PLATFORM=cgl GST_GL_WINDOW=cocoa
gst-launch-1.0 videotestsrc ! glimagesink
but still pass --enable-cocoa to configure script
because currently it can only be used with cocoa API.
We could later have cgl/gstglcontext_cgl.h that manages
a CGLContextObj directly and cocoa/gstglcontext_cocoa.h
would just wrap it.
So that it could be used with other Apple's window APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=729245
Add a new function to calculate video stream framerate which rely on
SPS, slice header and pic timing using formula:
time_scale 1 1
fps = ----------------- x --------------- x ------------------------
num_units_in_tick DeltaTfiDivisor (field_pic_flag ? 2 : 1)
See section E2.1 of H264 specification for definition of variables.
https://bugzilla.gnome.org/show_bug.cgi?id=723352
In a pipeline like so:
videotestsrc ! gleffects ! videoconvert ! sink
gleffects was simply passing the videoconvert bufferpool to videotestsrc
and not creating a glbufferpool. videobufferpool would then fail
to allocate from the glallocator.
From d4bcef3204 on, using a RGBA
texture to hold the data causes the glmemory to have half width
and a scaling of [2, 1]. Using a LA texture solves this problem
however cannot be attached to the framebuffer for copying into
a RGBA texture. Which will be solved by moving to EXT_texture_rg.
https://bugzilla.gnome.org/show_bug.cgi?id=728890
Previously it would only work if the alpha value was in the last
component (RGBx, BGRx). Now it works wherever the alpha value may
be (xRGB, xBGR, etc).
This fixes the OSX build and any builds with --disable-egl. That issue
was introduced in "glfilter: rewrite transform_caps to preserve caps fields".
https://bugzilla.gnome.org/show_bug.cgi?id=729861
Setting a scaled factor for X coordinate is not enough as the indexer
will still think stride is shorter and will not fully skip it. Instead,
update width, so the lines are as expected. Combined with the scale, it
will hide the cropped portion.
https://bugzilla.gnome.org/show_bug.cgi?id=729896
Fix a regression introduced recently with the lazy init.
It was happening when calling gst_video_gl_texture_upload_meta_upload
from an aplication. So not using gst_gl_upload_perform_with_buffer.
gst_video_frame_map() will store an updated video info base
on the video meta. In order to have the right stride and offset
we should update that video info accordingly.
The target texture of an EGLImage is the texture bind just
before calling glEGLImageTargetTexture2D.
As we currently only support a gl texture as the source of an EGLImage
the gl texture is actually already allocated when creating the eglimage.
I also see some cases where it fails to upload an eglimage when
glTexImage2D is called on the target.
GST_GL_WINDOW is used for window system specific choices.
An EGLDisplay can be created from window systems with egl support by using
eglGetDisplay().
https://bugzilla.gnome.org/show_bug.cgi?id=729551
This commit makes the loading of the GModules threadsafe, and
always first tries to load the symbol for the GL library that
is selected for the current context. Only then it falls back
to looking into the current module (NULL), and only as a last
resort the context specific function (e.g. eglGetProcAddress())
is called.
Also add configure parameters to select the names of the library
modules instead of using the defaults, and let the defaults be
independent of the G_MODULE_SUFFIX.
https://bugzilla.gnome.org/show_bug.cgi?id=728753
Previously, we used the width to determine the amount of data to be
copied using pbos. This, makes it allocate enough data for the
the strides as well.
Most of our 2D filters use the same simple vertex shader.
Also define the default fragment shader as the identity.
Avoid duplicating the same vertex and fragment shader text.
When parsing slice groups information for slice_group_map_type = 2, we
should only be reading up to num_slice_groups_minus1 groups since there
is always a "leftover" slice group and as many "foreground" slice groups
as needed.
This fixes parsing for SVCBMT-5 and SVCBMT-12 whereby the base layer would
have incorrectly been parsed to have up to 38 reference frames in list0,
which is not possible.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
When useDefaultScalingMatrixFlag is computed to be 1 while parsing
scaling_list(), then the scaling list shall be inferred to be equal
to the default list (7.4.2.1.1.1). That default list is really one
of Default_4x4_{Intra,Inter} or Default_8x8_{Intra,Inter} and not
one from fall-back rule sets A or B.
This fixes parsing for FRExt1_Panasonic_D, FRExt2_Panasonic_C,
FRExt3_Panasonic_E and FRExt4_Panasonic_B.
https://bugzilla.gnome.org/show_bug.cgi?id=724518
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This should fix QoS problems, where basesink believed it was rendering with
20FPS but actually we were just queueing up X11 Expose events and only once
in a while something was rendered.
I was lucky that:
e1 = vc_dispmanx_element_add ()
eglCreateWindowSurface (e1)
vc_dispmanx_element_remove (e1)
e2 = vc_dispmanx_element_add ()
resulted in having e2 equal to e1. And also having the egl surface
that does not allocate its buffers before the first draw.
It avoids to draw to an invalid buffer.
Withtout this the default frame buffer is undefined:
glBindFramebuffer (GL_FRAMEBUFFER, 0)
Visually you could see some white frames at the beginning
when lunching videotestsrc ! glimagesink
With OpenGL Profiler from XCode you could see some
GL_INVALID_FRAMEBUFFER_OPERATION for the first frames
Import libvpx 1.3.0 range decoder files (dboolhuff.[ch]) to implement
the VP8 utilities native interface. Likewise, copy and use the default
libvpx generated entropy probabilities tables.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
"(NSApplication *)sharedApplication This method also makes a connection
to the window server and completes other initialization"
The implicit thing which is not mentioned is that it required
to be called in the main thread.
Fix a regression introduces by 82b7c915bb
When using with gst-launch, it was not possible to click on the close
cross of the window anymore which is a bit anoying and also because
it's was possible before.
Prior to this commit the GstGLContextCocoaClass was initialized
in the main thread because gst_gl_context_new was called in the
state change function from going from ready to paused.
From this commit this call is done from the streaming thread.
So that the call to [NSApplication sharedApplication];
was not done in the main thread anymore.
We now ensure that by assuming there is a GMainLoop running.
It's for debugging purpose so that's ok to do that. Also
note we already do this assumtion to run app itereations.
The regression had no consequence on the cocoa/videooverlay example
(that should be moved from gst-plugins-gl to -bad) because the
application is responsible for that necessary call.
This patch provides the basic infrastructure required for this.
Upload and Download has been ported to this.
Has the nice effect of allowing GstGLMemory to be our
refcounted texture object for any texture type (not just RGBA).
Should not lose any features/video formats.
It was originally test for 9 bytes (as the comment says) and was
rewritten buggily. So rewrite it a third way, which is now
hopefully consistent with the original and the comment, while
being more sense-making to humans.
Coverity 1139654
So this is actually pointless. We'll just have to ignore
Coverity moaning on those.
Revert "mpegts: test for allocation failure"
This reverts commit 224cb81b8f.
While it's unlikely to get there, it silences the coverity warning
on the error code path that we test for NULL before freeing, when
all branches there are from locations where pmt cannot be NULL,
and removing the NULL check makes the code more vulnerable to a
hypothetical future branch from somewhere where it can be.
Coverity 1139852
As the relevant variables are initialized to 0/NULL, we can loop
over the full range and make sure we free partial allocations
when an error happens partway through initialization.
Mesa, for example returns valid pointers for glGetIntegerv and
glGetStringi even if the gl version is less than that required for
both those functions to supposedly exist.
https://bugzilla.gnome.org/show_bug.cgi?id=727324
* picked from old libgstegl:
- GstEGLImageMemory
- GstEGLImageAllocator
- last_buffer management from removed GstEGLImageBufferPool
* add-ons:
- GstEGLImageMemory now old a reference on GstGLContext
so that it can delete the EGLImage and its gltexture source
while having the associated gl context being current.
- add EGLImage support for GstVideoGLTextureUploadMeta which
mainly call EGLImageTargetTexture2D
- GstGLBufferPool now supports GstEGLImageAllocator
- glimagesink / glfilters / etc.. now propose GstEGLImageAllocator
to upstream
https://bugzilla.gnome.org/show_bug.cgi?id=703343
The idr_pic_id syntax element depends on IdrPicFlag, which is a calculated
value that does not only depend on NAL unit type (IDR), but possibly also
on MVC non_idr_flag syntax element.
The computed idr_pic_flag is already stored in GstH264NalUnit structure.
https://bugzilla.gnome.org/show_bug.cgi?id=721772
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Split seq_parameter_set_data() parsing off gst_h264_parse_sps() so
that it could be re-used later on.
https://bugzilla.gnome.org/show_bug.cgi?id=685215
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add missing NAL unit types. They are mostly related to alpha blending,
scalable video coding extensions (SVC, Annex.G), and multiview video
coding extensions (MVC, Annex.H).
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix build when GST_DISABLE_GST_DEBUG is not defined. Use a switch
statement to dispatch to the various SEI payload handlers.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The payloadSize does not account for emulation prevention bytes. So,
just use nal_reader_skip() for skipping payload_size bits. It should
be possible to further optimize this code since the NAL reader shall
be aligned to byte boundary already.
Kill the now unused nal_reader_skip_to_next_byte() function.
https://bugzilla.gnome.org/show_bug.cgi?id=726829
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix parsing of buffering_period() SEI messages. The number of bits
used to express {nal,vcl}_initial_cpb_removal_delay{,_offset} syntax
elements is not 5 but 1 + initial_cpb_removal_delay_length_minus1.
https://bugzilla.gnome.org/show_bug.cgi?id=726828
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Account for trailing zero bits when checking for rbsp_more_data().
In particular, fix an hypothetical stream whereby rbsp_more_data()
is called in the following conditions for PPS header: NalReader
reached position 20, 12 bits are remaining and trailing data at
current byte position is c8 00.
rbsp_more_data() used to return TRUE whereas it should obviously
return FALSE because x8 00 represents a valid rbsp_trailing_bits()
structure.
https://bugzilla.gnome.org/show_bug.cgi?id=685890
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
