Commit graph

6074 commits

Author SHA1 Message Date
L. E. Segovia
4dc955e94a libav: Port reordered_opaque usage to ref-counted opaque_ref
Instead of passing along the system frame number, we pass along a reference to
the GstVideoCodecFrame.

In order for all internal cleanup to happen properly, this also requires
switching to the proper AVPacket creation/destruction methods (av_packet_alloc()
and av_packet_unref())

Fixes #2568

Co-authored-by: Edward Hervey <edward@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5186>
2024-01-17 08:39:13 +00:00
L. E. Segovia
f2c9d9baa1 libav: Port frame counting to frame_num
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5186>
2024-01-17 08:39:13 +00:00
L. E. Segovia
bbf6b4e634 libav: Port channel layout and counting to AVChannelLayout
Fixes #2833

Co-authored-by: Edward Hervey <edward@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5186>
2024-01-17 08:39:13 +00:00
L. E. Segovia
faea2b1dde wraps:ffmpeg: Update to 6.0
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5186>
2024-01-17 08:39:13 +00:00
Mengkejiergeli Ba
a6ab4fa98b msdkdec: Let msdk base decoder maintain the output_state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5929>
2024-01-17 10:04:03 +08:00
Thibault Saunier
5575d9cb02 ges: launcher: Make +effect stack effects from source to last effect added
Until now when doing `+test-clip blue +effect effect1 + effect effect2`
leaded to the following pseudo pipeline

   videotestsrc ! effect2 ! effect1

given the `ges-launch` syntax this is quite unexpected and this needed
fixing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5735>
2024-01-16 20:13:23 +00:00
Thibault Saunier
8cf17e5d0d ges: Add scaler in the 'gap filling' clip on too short nested timelines
So we can respect user request on source that can scale

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5735>
2024-01-16 20:13:23 +00:00
Thibault Saunier
90218243d2 ges: track-element: Set the nleobject as soon as possible
Some subclasses might need to have access to it when configuring their
element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5735>
2024-01-16 20:13:23 +00:00
Thibault Saunier
30cc16d670 ges: composition-meta: Enhance documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5735>
2024-01-16 20:13:23 +00:00
Thibault Saunier
bad6b7e60a ges: Implement a gesvideoscale bin
This allows user to be in control of when scaling happens in the pipeline.
It can be plugged as an effect and scaling will be forced to happen in
the effect instead of in the compositor.

Without this, it would not be possible for users to, for example,
crop a video source before scaling to the target source size.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5735>
2024-01-16 20:13:23 +00:00
Chris Spencer
2388932767 vkmemory: don't map memory more than once
vkMapMemory may not be called on a memory object that is already
host-mapped. If the gstreamer memory object is mapped more than once then
reuse the existing Vulkan mapping.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5917>
2024-01-16 17:44:48 +01:00
Mengkejiergeli Ba
2c61fd92e2 msdkvpp: Fix dma caps negotiation
Modify the fix_output_format in vpp to directly generate caps with
negotiated src caps, and we have the correct dma caps negotiation in
fix_output_format function. And thus, we can remove the redundant
negotiation of using function pad_accept_memory in vpp.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5845>
2024-01-16 14:04:05 +08:00
Seungha Yang
495390f63a h264parse: Fix AU collection
If remaining NALUs are expected to be drained in the current
process_frame() loop, do not adjust offsets. Otherwise NALU data
will point to random byte position and it would be broken data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5911>
2024-01-15 21:53:11 +00:00
ekwange
100497df20 validate: check: Fix known-not-leaky to work
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3940>
2024-01-15 19:56:06 +00:00
ekwange
264a57dabe validate: launcher: Fix typo
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3940>
2024-01-15 19:56:06 +00:00
ekwange
248044329c validate: launcher: Add debug message and fix typo
Add messages to clearly see why test was excluded.
And fix typo prerrol

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3940>
2024-01-15 19:56:06 +00:00
Thibault Saunier
147eb44149 encodebin2: Fix support for rendering to stream without muxer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5914>
2024-01-15 18:28:46 +00:00
Seungha Yang
56f2c47400 appsrc: Release lock before pushing segment event
Do not hold lock during event push. Similar fix to the commit
2e5908d33f but another place

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5925>
2024-01-15 22:51:34 +09:00
Chao Guo
ed4af574d8 viv-fb: fix build warning of [-Wunused-variable]
display_viv_fb is unused in gst_gl_display_viv_fb_finalize ().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5913>
2024-01-15 07:24:47 +00:00
Chao Guo
17745ba5db gl/display: fix build warning of [-Wint-in-bool-context]
GST_GL_DISPLAY_TYPE_VIV_FB is enum constant but is used
as bool.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5913>
2024-01-15 07:24:47 +00:00
Chao Guo
c1a9b77a1a glupload: fix build warning of [-Wincompatible-pointer-types]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5913>
2024-01-15 07:24:47 +00:00
Seungha Yang
0cceb6f68f d3d12memory: Don't use persistent staging buffer map
Persistent map is not recommended in case of readback

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5919>
2024-01-14 13:10:56 +00:00
Seungha Yang
077470913d d3d12decoder: Use D3D12_HEAP_FLAG_CREATE_NOT_ZEROED flag
Since the first access to a texture is always write, zero initialization
is unnecessary

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5919>
2024-01-14 13:10:56 +00:00
Olivier Crête
b1ac114ca5 onnxinference: Return caps based on model preference when possible
This should enable zero-copy when the model has the right type

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5885>
2024-01-13 22:29:41 +00:00
Olivier Crête
83c2d30438 onnx: Use the element pointer for debug message
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5885>
2024-01-13 22:29:41 +00:00
Olivier Crête
54b361c554 onnx: Extract data type from the model itself
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5885>
2024-01-13 22:29:41 +00:00
Hou Qi
2539bb0b1d rtpjitterbuffer: Fix build warning in rtp_jitter_buffer_append_query()
This is to fix build warnings when using [-Wmaybe-uninitialized]
../gst/rtpmanager/rtpjitterbuffer.c:1237:10: warning: 'head' may be used uninitialized [-Wmaybe-uninitialized]
 1237 |   return head;

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5907>
2024-01-13 15:00:19 +00:00
Thibault Saunier
991e0aaf3a gl: basefilter: Ensure we have a context before running allocation query
Even in the case where we are not in passthrough but the subclasses are
going to run the allocation query, we need to ensure that we have a
GLContext ready to be used. Otherwise we might end up with assertions
with `gloverlaycompositor` like:

```
 #0  __pthread_kill_implementation (no_tid=0, signo=6, threadid=140285688829504) at ./nptl/pthread_kill.c:44
 #1  __pthread_kill_internal (signo=6, threadid=140285688829504) at ./nptl/pthread_kill.c:78
 #2  __GI___pthread_kill (threadid=140285688829504, signo=signo@entry=6) at ./nptl/pthread_kill.c:89
 #3  0x00007f985ed88476 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
 #4  0x00007f985ed6e7f3 in __GI_abort () at ./stdlib/abort.c:79
 #5  0x00007f985faedb57 in g_assertion_message (domain=<optimized out>, file=<optimized out>, line=<optimized out>, func=0x7f9856251b80 <__func__.5> "gst_gl_buffer_pool_set_config", message=<optimized out>) at ../../../glib/gtestutils.c:3253
 #6  0x00007f985fb4770f in g_assertion_message_expr (domain=0x7f9856251883 "GStreamer-GL", file=0x7f9856251820 "../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbufferpool.c", line=132, func=0x7f9856251b80 <__func__.5> "gst_gl_buffer_pool_set_config", expr=<optimized out>) at ../../../glib/gtestutils.c:3279
 #7  0x00007f9856200e1f in gst_gl_buffer_pool_set_config (pool=0x7f977009d7e0, config=0x7f9704549050) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbufferpool.c:132
 #8  0x00007f985f99bcf7 in gst_buffer_pool_set_config (pool=0x7f977009d7e0, config=0x7f9704549050) at ../subprojects/gstreamer/gst/gstbufferpool.c:698
 #9  0x00007f985620e2be in gst_gl_filter_propose_allocation (trans=0x7f9754014a80, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglfilter.c:834
 #10 0x00007f98562b43c5 in gst_gl_overlay_compositor_element_propose_allocation (trans=0x7f9754014a80, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/ext/gl/gstgloverlaycompositorelement.c:188
 #11 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f9754014a80, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #12 0x00007f98561eed91 in gst_gl_base_filter_query (trans=0x7f9754014a80, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:319
 #13 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f977c07c7e0, parent=0x7f9754014a80, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #14 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f977c07c7e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #15 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f977c07c340, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #16 0x00007f985f8e9817 in gst_base_transform_default_propose_allocation (trans=0x7f975401e2b0, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1394
 #17 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f975401e2b0, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #18 0x00007f98561eed91 in gst_gl_base_filter_query (trans=0x7f975401e2b0, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:319
 #19 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f96e420b0c0, parent=0x7f975401e2b0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #20 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f96e420b0c0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #21 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a0bf0f0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #22 0x00007f985f8e9817 in gst_base_transform_default_propose_allocation (trans=0x7f982a128790, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1394
 #23 0x00007f9856289017 in _gst_gl_upload_element_propose_allocation (bt=0x7f982a128790, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/ext/gl/gstgluploadelement.c:239
 #24 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f982a128790, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #25 0x00007f98561eed91 in gst_gl_base_filter_query (trans=0x7f982a128790, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:319
 #26 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f96e405b630, parent=0x7f982a128790, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #27 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f96e405b630, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #28 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f9730289670, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #29 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f9730289670, data=0x7f96cea60000) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #30 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f98280f5d00, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea60000) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #31 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f98280f5d00, parent=0x7f98280cc540, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #32 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f98280f5d00, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #33 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f978438b680, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #34 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f978438b680, data=0x7f96cea60290) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #35 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f98280f5a10, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea60290) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #36 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f98280f5a10, parent=0x7f97ec0147f0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #37 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f98280f5a10, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #38 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f9784831a70, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #39 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f9784831a70, data=0x7f96cea60520) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #40 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f9770081da0, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea60520) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #41 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f9770081da0, parent=0x7f983c14e330, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #42 0x00007f9812258e5c in ghostpad_query_function (ghostpad=0x7f9770081da0, parent=0x7f983c14e330, query=0x7f97040310a0) at ../subprojects/gst-editing-services/plugins/nle/nleghostpad.c:568
 #43 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f9770081da0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #44 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2713e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #45 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f982a2713e0, data=0x7f96cea60800) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #46 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f982a2800c0, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea60800) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #47 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f982a2800c0, parent=0x7f982a2713e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #48 0x00007f9812258a94 in internalpad_query_function (internal=0x7f982a2800c0, parent=0x7f982a2713e0, query=0x7f97040310a0) at ../subprojects/gst-editing-services/plugins/nle/nleghostpad.c:460
 #49 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2800c0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #50 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2f4c80, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #51 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f982a2f4c80, data=0x7f96cea60ae0) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #52 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f982a2dfb00, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea60ae0) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #53 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f982a2dfb00, parent=0x7f982a2f4c80, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #54 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2dfb00, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #55 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2fbc10, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #56 0x00007f985f8e9817 in gst_base_transform_default_propose_allocation (trans=0x7f982a2e87d0, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1394
 #57 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f982a2e87d0, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #58 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2fb9c0, parent=0x7f982a2e87d0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #59 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2fb9c0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #60 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2fb770, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #61 0x00007f985f8e9817 in gst_base_transform_default_propose_allocation (trans=0x7f982a302780, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1394
 #62 0x00007f985c008d9d in gst_video_rate_propose_allocation (trans=0x7f982a302780, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst/videorate/gstvideorate.c:1365
 #63 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f982a302780, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #64 0x00007f985c008cc5 in gst_video_rate_query (trans=0x7f982a302780, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst/videorate/gstvideorate.c:1347
 #65 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2fb520, parent=0x7f982a302780, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #66 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2fb520, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #67 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2889c0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #68 0x00007f98122048e6 in gst_base_auto_convert_internal_sink_query (pad=0x7f9750046af0, parent=0x0, query=0x7f97040310a0) at ../subprojects/gst-plugins-bad/gst/autoconvert/gstbaseautoconvert.c:1381
 #69 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f9750046af0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #70 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2c13e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #71 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f982a2c13e0, data=0x7f96cea61680) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #72 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f982a2de340, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea61680) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #73 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f982a2de340, parent=0x7f982a2c13e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #74 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2de340, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #75 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2db760, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #76 0x00007f98561eebd1 in gst_gl_base_filter_query (trans=0x7f982a2d8df0, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:285
 #77 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2db510, parent=0x7f982a2d8df0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #78 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2db510, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #79 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2db2c0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #80 0x00007f98561eebd1 in gst_gl_base_filter_query (trans=0x7f982a2dc3d0, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:285
 #81 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2db070, parent=0x7f982a2dc3d0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #82 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2db070, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #83 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2dae20, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #84 0x00007f98561eebd1 in gst_gl_base_filter_query (trans=0x7f982a2d8a60, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:285
 #85 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2dabd0, parent=0x7f982a2d8a60, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #86 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2dabd0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #87 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2c1170, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #88 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f982a2c1170, data=0x7f96cea62060) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #89 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f982a2de0e0, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea62060) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #90 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f982a2de0e0, parent=0x7f982a2c1170, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #91 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2de0e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #92 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2da980, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #93 0x00007f985f8e9817 in gst_base_transform_default_propose_allocation (trans=0x7f982a2c8c10, decide_query=0x0, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1394
 #94 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f982a2c8c10, direction=GST_PAD_SINK, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #95 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2da730, parent=0x7f982a2c8c10, query=0x7f97040310a0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #96 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2da730, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #97 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2da4e0, query=0x7f97040310a0) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #98 0x00007f985f8e7ff9 in gst_base_transform_do_bufferpool (trans=0x7f982a2d1a50, outcaps=0x7f970407aac0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:948
 #99 0x00007f985f8e963e in gst_base_transform_setcaps (trans=0x7f982a2d1a50, pad=0x7f982a2da290, incaps=0x7f970407aac0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1351
 #100 0x00007f985f8e99c8 in gst_base_transform_reconfigure_unlocked (trans=0x7f982a2d1a50) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1431
 #101 0x00007f985f8e9d38 in gst_base_transform_default_query (trans=0x7f982a2d1a50, direction=GST_PAD_SINK, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1515
 #102 0x00007f98561eed91 in gst_gl_base_filter_query (trans=0x7f982a2d1a50, direction=GST_PAD_SINK, query=0x7f9704541620) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:319
 #103 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2da290, parent=0x7f982a2d1a50, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #104 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2da290, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #105 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2da040, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #106 0x00007f985f8e9817 in gst_base_transform_default_propose_allocation (trans=0x7f982a2c88d0, decide_query=0x0, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1394
 #107 0x00007f985f8e9ea8 in gst_base_transform_default_query (trans=0x7f982a2c88d0, direction=GST_PAD_SINK, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1537
 #108 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2d7d30, parent=0x7f982a2c88d0, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #109 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2d7d30, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #110 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2b7d40, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #111 0x00007f985f9f0cb3 in query_forward_func (pad=0x7f982a2b7d40, data=0x7f96cea62cb0) at ../subprojects/gstreamer/gst/gstpad.c:3458
 #112 0x00007f985f9ef9ac in gst_pad_forward (pad=0x7f982a2c0f00, forward=0x7f985f9f0b90 <query_forward_func>, user_data=0x7f96cea62cb0) at ../subprojects/gstreamer/gst/gstpad.c:3084
 #113 0x00007f985f9f0ed1 in gst_pad_query_default (pad=0x7f982a2c0f00, parent=0x7f982a2ba620, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:3529
 #114 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2c0f00, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #115 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2d7ae0, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #116 0x00007f98561eebd1 in gst_gl_base_filter_query (trans=0x7f982a2d86d0, direction=GST_PAD_SINK, query=0x7f9704541620) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:285
 #117 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2d7890, parent=0x7f982a2d86d0, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #118 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2d7890, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #119 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2d7640, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #120 0x00007f98561eebd1 in gst_gl_base_filter_query (trans=0x7f982a2d5b00, direction=GST_PAD_SINK, query=0x7f9704541620) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:285
 #121 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2d73f0, parent=0x7f982a2d5b00, query=0x7f9704541620) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #122 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2d73f0, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #123 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2d71a0, query=0x7f9704541620) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #124 0x00007f985f8e7ff9 in gst_base_transform_do_bufferpool (trans=0x7f982a2d8340, outcaps=0x7f9704004e30) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:948
 #125 0x00007f985f8e963e in gst_base_transform_setcaps (trans=0x7f982a2d8340, pad=0x7f982a2d6f50, incaps=0x7f9704002120) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1351
 #126 0x00007f985f8e99c8 in gst_base_transform_reconfigure_unlocked (trans=0x7f982a2d8340) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1431
 #127 0x00007f985f8e9d38 in gst_base_transform_default_query (trans=0x7f982a2d8340, direction=GST_PAD_SINK, query=0x7f97045afe90) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1515
 #128 0x00007f98561eed91 in gst_gl_base_filter_query (trans=0x7f982a2d8340, direction=GST_PAD_SINK, query=0x7f97045afe90) at ../subprojects/gst-plugins-base/gst-libs/gst/gl/gstglbasefilter.c:319
 #129 0x00007f985f8ea223 in gst_base_transform_query (pad=0x7f982a2d6f50, parent=0x7f982a2d8340, query=0x7f97045afe90) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1628
 #130 0x00007f985f9f2f77 in gst_pad_query (pad=0x7f982a2d6f50, query=0x7f97045afe90) at ../subprojects/gstreamer/gst/gstpad.c:4202
 #131 0x00007f985f9f3aa2 in gst_pad_peer_query (pad=0x7f982a2d6d00, query=0x7f97045afe90) at ../subprojects/gstreamer/gst/gstpad.c:4334
 #132 0x00007f985f8e7ff9 in gst_base_transform_do_bufferpool (trans=0x7f982a2d4920, outcaps=0x7f9704071fb0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:948
 #133 0x00007f985f8e963e in gst_base_transform_setcaps (trans=0x7f982a2d4920, pad=0x7f982a2d6ab0, incaps=0x7f97500020c0) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1351
 #134 0x00007f985f8e99c8 in gst_base_transform_reconfigure_unlocked (trans=0x7f982a2d4920) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:1431
 #135 0x00007f985f8eb797 in default_submit_input_buffer (trans=0x7f982a2d4920, is_discont=0, inbuf=0x7f972c009b70) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:2041
 #136 0x00007f985f8ecb28 in gst_base_transform_chain (pad=0x7f982a2d6ab0, parent=0x7f982a2d4920, buffer=0x7f972c009b70) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:2348
 #137 0x00007f985f9f47c2 in gst_pad_chain_data_unchecked (pad=0x7f982a2d6ab0, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4463
 #138 0x00007f985f9f5a15 in gst_pad_push_data (pad=0x7f982a2d6860, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4739
 #139 0x00007f985f9f61cc in gst_pad_push (pad=0x7f982a2d6860, buffer=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4858
 #140 0x00007f985f8ecd2e in gst_base_transform_chain (pad=0x7f982a2d6610, parent=0x7f982a2c8590, buffer=0x7f972c009b70) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:2391
 #141 0x00007f985f9f47c2 in gst_pad_chain_data_unchecked (pad=0x7f982a2d6610, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4463
 #142 0x00007f985f9f5a15 in gst_pad_push_data (pad=0x7f982a2de5a0, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4739
 #143 0x00007f985f9f61cc in gst_pad_push (pad=0x7f982a2de5a0, buffer=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4858
 #144 0x00007f985f9ce428 in gst_proxy_pad_chain_default (pad=0x7f982a2c1650, parent=0x7f982a290880, buffer=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstghostpad.c:127
 #145 0x00007f985f9f47c2 in gst_pad_chain_data_unchecked (pad=0x7f982a2c1650, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4463
 #146 0x00007f985f9f5a15 in gst_pad_push_data (pad=0x7f97500468a0, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4739
 #147 0x00007f985f9f61cc in gst_pad_push (pad=0x7f97500468a0, buffer=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4858
 #148 0x00007f9812203aa4 in gst_base_auto_convert_sink_chain (pad=0x7f982a288770, parent=0x7f982a22fbd0, buffer=0x7f972c009b70) at ../subprojects/gst-plugins-bad/gst/autoconvert/gstbaseautoconvert.c:1032
 #149 0x00007f985f9f47c2 in gst_pad_chain_data_unchecked (pad=0x7f982a288770, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4463
 #150 0x00007f985f9f5a15 in gst_pad_push_data (pad=0x7f982a288520, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4739
 #151 0x00007f985f9f61cc in gst_pad_push (pad=0x7f982a288520, buffer=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4858
 #152 0x00007f985f8ecd2e in gst_base_transform_chain (pad=0x7f982a2882d0, parent=0x7f982a274570, buffer=0x7f972c009b70) at ../subprojects/gstreamer/libs/gst/base/gstbasetransform.c:2391
 #153 0x00007f985f9f47c2 in gst_pad_chain_data_unchecked (pad=0x7f982a2882d0, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4463
 #154 0x00007f985f9f5a15 in gst_pad_push_data (pad=0x7f982a288080, type=4112, data=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4739
 #155 0x00007f985f9f61cc in gst_pad_push (pad=0x7f982a288080, buffer=0x7f972c009b70) at ../subprojects/gstreamer/gst/gstpad.c:4858
 #156 0x00007f982499b9f9 in gst_queue_push_one (queue=0x7f9829d61910) at ../subprojects/gstreamer/plugins/elements/gstqueue.c:1388
 #157 0x00007f982499c88d in gst_queue_loop (pad=0x7f982a288080) at ../subprojects/gstreamer/plugins/elements/gstqueue.c:1541
 #158 0x00007f985fa376bb in gst_task_func (task=0x7f976002eb90) at ../subprojects/gstreamer/gst/gsttask.c:399
 #159 0x00007f985fa38bf9 in default_func (tdata=0x7f975400c160, pool=0x7f984cb62380) at ../subprojects/gstreamer/gst/gsttaskpool.c:70
 #160 0x00007f985fb566b4 in g_thread_pool_thread_proxy (data=<optimized out>) at ../../../glib/gthreadpool.c:350
 #161 0x00007f985fb53a51 in g_thread_proxy (data=0x7f982a071580) at ../../../glib/gthread.c:827
 #162 0x00007f985eddaac3 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
 #163 0x00007f985ee6ca40 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5856>
2024-01-13 10:36:51 +00:00
Nirbheek Chauhan
1913ff18b1 audioaggregator: Sync property values to output timestamp
This is what videoaggregator already does since 2019, and it makes
sense. The properties need to change at every output frame based on
the output time because they may change even though the input frame is
not changing. See:

6a8c15f3bd

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3851>
2024-01-13 06:48:44 +00:00
Chris Spencer
865227b750 vkimagebufferpool: allow specifying initial image layout
The pool currently defaults to performing a layout transition to
VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, with some special exceptions for
video usages. This may not be a legal transition depending on the usage.
Provide an API to explicitly control the initial image layout.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5881>
2024-01-13 05:54:00 +00:00
Scott Moreau
f0d15f335d gst-launch: accept option to set program name
The option --prog-name="PROGRAM-NAME" can be passed to set the program name.
The program name is used by gtk and gstreamer to set the class or app-id.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5263>
2024-01-12 17:11:11 +00:00
Philippe Normand
8a99589d2c vpxdec: Use appropriate domain and code for decoding errors
STREAM domain and DECODE error is commonly used in other decoders. ENCODE is for
encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5916>
2024-01-12 14:10:36 +00:00
Thibault Saunier
b75b17cf73 ges: pipeline: Port to encodebin2
This way we can use muxing sinks

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5915>
2024-01-12 12:02:00 +00:00
Víctor Manuel Jáquez Leal
05d239f631 jpegparse: bump to primary rank
Also updates medias modules for CI.

Fixes: #1775
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3983>
2024-01-12 11:04:07 +01:00
Ratchanan Srirattanamet
facb000afe androidmedia: add NDK implementation of Android MediaCodec
This reduces the amount of Java <-> native calls, which should reduce
overhead a bit. It also paves a way to share the code between Android
and a libhybris-based backend (where GNU/Linux system uses Android
driver) in the future.

Bug: https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1242
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4115>
2024-01-11 19:00:13 +00:00
Ratchanan Srirattanamet
a50ce9c6b0 androidmedia: allow multiple implementations of codec and format
When implementing NDK media support, it would be useful to also have JNI
implementation in the same binary as NDK media compatibility is lower.
As such, implement a rudimentary vtable system for gstamc-codec and
gstamc-format, and allow choosing the implementation at static_init()
time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4115>
2024-01-11 19:00:13 +00:00
Ratchanan Srirattanamet
d0ffcb46df androidmedia: call all static_init() functions from single entry point
This allows the implementations to do custom logic behind the hood. For
example, when NDK implementation is added, the entrypoint can chooses to
statically initialize the NDK implementations or the JNI one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4115>
2024-01-11 19:00:13 +00:00
Olivier Crête
814f21557f soup: Avoid using GUri before GLib 2.66
Let's use gpointer for now

Fixes: #3169
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5906>
2024-01-11 18:06:59 +00:00
Xavier Claessens
6a3b2001a3 gstpad, gstobject: Add GMutexLocker helper
Add GST_OBJECT_AUTO_LOCK() and GST_PAD_STREAM_AUTO_LOCK() to simplify
g_autoptr(GMutexLocker) usage.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4300>
2024-01-11 17:20:23 +00:00
Stéphane Cerveau
f337d37d6d codecparsers: add slice type name for h265
Add a method to convert the slice type to a descriptive
name.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5908>
2024-01-11 13:17:43 +01:00
Stéphane Cerveau
9c250179c6 codecparsers: add helper methods for h264
Add two helper methods to convert profile
and slice types

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5908>
2024-01-11 13:17:43 +01:00
Mengkejiergeli Ba
0d04660c5d msdk: Fix memory leaks
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5819>
2024-01-11 14:52:45 +08:00
Damian Hobson-Garcia
fe64e68cc4 gloverlay: Apply updated overlay coordinates correctly
When overlay coordinates are updated, after the initial coordinates
are set, the shader indices are applied to the wrong buffer, resulting
in the background image appearing where the overlay should.

Bind the array buffer before applying subsequent coordinate
updates.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5901>
2024-01-11 01:53:16 +00:00
Olivier Crête
745197d386 analytics: Implement scale meta transform for Object detection meta
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5863>
2024-01-10 18:35:17 -05:00
Olivier Crête
5d3035553c analytics: Replace type quark with opaque struct pointer
This way, we can add function pointers in there for things like
transformations.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5863>
2024-01-10 18:34:53 -05:00
Olivier Crête
91815710dd analyticsmeta: Make the GstAnalyticsRelatableMtdData struct private
Only ask the subclass about how much space they need, this way we can keep
the allocation details more private.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5863>
2024-01-10 18:19:38 -05:00
Stéphane Cerveau
476c7efcb7 vulkan: decoder: create union for profile usage
As a profile can include a VkVideoDecodeUsageInfoKHR
or VkVideoEncodeUsageInfoKHR, use union to separate the both.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5701>
2024-01-10 17:15:12 +00:00
Víctor Manuel Jáquez Leal
7f14bfe8b8 va: basedec: fix return type
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5903>
2024-01-10 12:48:16 +01:00
Mengkejiergeli Ba
14c5d3ee91 msdk: Modify the caps order when register plugins
With this patch, the caps is registered in the order of memory features
as: VAMemory, DMABuf then raw caps in linux path, and D3D11Memory then
raw caps in windows path. It helps to prioritize the video memory for all
msdk elements when doing negotiation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5898>
2024-01-10 01:14:21 +00:00
Mengkejiergeli Ba
7d62166098 msdk: Remove useless function for vp8dec and vc1dec in windows path
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5898>
2024-01-10 01:14:21 +00:00
Philippe Normand
952f252104 decodebin3: Fix clean-up of EOS'd parsebin src pad
In `parse_chain_output_probe()` the corresponding input stream might receive EOS
and thus be removed before the actual pad is removed. So we cannot assert about
this in `parsebin_pad_removed_cb()`.

Also, driving-by, protect `find_input_stream_for_pad()` with the selection lock
similarly to other functions accessing the input streams list.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5887>
2024-01-09 19:00:38 +00:00
Robert Mader
a64f2bf628 v4l2codecs: Always chain up to parent decide_allocation function for all codecs
Apply the changes to the codecs previously left out, fixing playback
issues seen with VP9.

See: 70ff80a873 ("v4l2codecs: Always chain up to parent decide_allocation function")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5896>
2024-01-09 17:29:52 +00:00
Robert Mader
75b7e5fcb3 v4l2codecs/av1decoder: Allow output caps to be updated
To bring AV1 in line - needed for the next commit.

See: d3c5fc815e ("v4l2codecs: Allow output caps to be updated")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5896>
2024-01-09 17:29:52 +00:00
Stéphane Cerveau
97ebaa0bc1 gstutils: add gst_util_ceil_log2
Move ceil_log2 from nalutils.* to gstutils.*

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5888>
2024-01-09 15:34:10 +00:00
Seungha Yang
a242b93f33 d3d12decoder: Release decoder and heap on stop
Sometimes driver crash happens if ID3D12VideoDevice got closed first,
and then ID3D12VideoDecoderHeap/ID3D12VideoDecoder are released.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5895>
2024-01-09 13:52:44 +00:00
Seungha Yang
6ffed9b3dc d3d12videosink: Fix crash on set_buffer()
set_buffer() can be called with null buffer

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5895>
2024-01-09 13:52:44 +00:00
Seungha Yang
7f2b4b6b09 d3d12: Fix warnings reported by debug layer
Fixing below debug layer report
ID3D12Device::CreateCommittedResource: Ignoring InitialState D3D12_RESOURCE_STATE_COPY_DEST.
Buffers are effectively created in state D3D12_RESOURCE_STATE_COMMON.

Buffer resource will be automatically promoted to D3D12_RESOURCE_STATE_COPY_DEST
at the very first COPY operation time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5895>
2024-01-09 13:52:44 +00:00
Seungha Yang
e1ecd1de2f d3d12: Simplify fence data setup
Adding COM and GstMiniObject specific methods to skip passing
free function pointer

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5895>
2024-01-09 13:52:44 +00:00
Seungha Yang
2c3f3c0cb6 d3d12device: Print live objects on finalize()
The report from debug layer can help tracing resource leak

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5895>
2024-01-09 13:52:44 +00:00
Sebastian Dröge
6fa41f78bb rtpsession: Remove some unused fields
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5899>
2024-01-08 12:57:04 +02:00
Seungha Yang
0077c4beb0 d3d12decoder: Set buffer flag on output buffer
... and remove unnecessary condition check

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5891>
2024-01-07 13:38:44 +00:00
Seungha Yang
02563605e8 d3d12videosink: Add gamma, primaries and sampling filter properties
Add properties to control conversion methods

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5891>
2024-01-07 13:38:44 +00:00
Seungha Yang
368d8b9252 d3d12videosink: Add support for 3D transformation
Add x, y, and z axis rotation with scaling support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5891>
2024-01-07 13:38:44 +00:00
Seungha Yang
72237d2563 d3d12videosink: Add support for MSAA
Adding "msaa" property to support MSAA rendering

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5891>
2024-01-07 13:38:44 +00:00
Seungha Yang
de331217aa d3d12videosink: Add support for fullscreen mode
Adding "fullscreen-on-alt-enter" and "fullscreen" properties so that
use can control fullscreen mode switch

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5891>
2024-01-07 13:38:44 +00:00
Sanchayan Maity
00bbac6541 rtphdrext-clientaudiolevel: Fix level value being written by the extension
When level value is greater than 127, it was being clamped but this clamped
value was not the one being actually used. For level values greater than 127
this resulted in an incorrect value being used. As an example, a level value
of 187, after and'ed with 0x7F, it would result in 0x3B being reported as the
level value.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5893>
2024-01-07 16:00:18 +05:30
Thibault Saunier
e3be7e3162 nlecomposition: Simplify the way we ensure stream-start is sent
stream-start should always be sent once at the beginning of the stream,
so we should make sure it is pushed at the very beginning and after
resets (going back to READY).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5858>
2024-01-06 13:22:19 +00:00
Thibault Saunier
7fe786135f validate: scenario: Do not use a NULL scenario description structure
The scenario meta is optional and we have to take that into account.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3199
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5892>
2024-01-06 09:47:16 -03:00
Seungha Yang
24d515f57d d3d11screencapturesrc: Hide symbols
Fix potential linking error in case of static build

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5883>
2024-01-05 21:27:35 +09:00
Seungha Yang
ae3ed20f41 d3d12: Add screen capture element
Since DXGI desktop duplication API does not work with Direct3D12 device,
this element will use Direct3D11 device to acquire frame.
Then other rendering operations (e.g., texture copy, render pipeline) will
happen using Direct3D12 API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5883>
2024-01-05 21:27:35 +09:00
Olivier Crête
6482514737 onnxinference: Fix leak of the output tensors
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5884>
2024-01-04 19:11:20 +00:00
Olivier Crête
06d477a89d onnx: Fix leak in ssdobjectdetector decoder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5884>
2024-01-04 19:11:20 +00:00
Thibault Saunier
b85a9454e5 ges: Expose audioconvert mix-matrix property in audio sources
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5853>
2024-01-04 12:02:41 +00:00
Mengkejiergeli Ba
5d488c444e msdkvpp: Remove passthrough condition in propose_allocation
According to basetransform func: gst_base_transform_do_bufferpool,
it is the upstream to decide if it needs a bufferpool from vpp, so
we don't need passthrough condition in subclass propose_allocation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5879>
2024-01-04 04:35:40 +00:00
Daniel Morin
90a3b63eed h264parse: use AUD to detect first VCL NAL
- Fix skipsize on _update_backlog failure.
- Add robustness to AU completion detection by using AUD when present. If we've
received a AUD we overwrite the first VCL NAL detection when the result was
negative. VCL following AUD is the first VCL of next AU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5862>
2024-01-03 20:43:34 +00:00
Sebastian Dröge
3cd00da0bc h2652json: Fix mix-up of different enum types
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5873>
2024-01-03 09:03:30 +00:00
Seungha Yang
1b86c9d370 d3d12decoder: Try zero-copy in case of reverse playback too
In case of tier 1 decoder, always use reference-only picture to avoid
fixed-size pool limitation and output decoded picture without
copy even for negative rate. Also do not use copy queue for GPU to GPU
copy. Copy queue is specialized for upload/download and may occupy
PCIE bandwidth. Use direct queue as recommended by vendors.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5877>
2024-01-03 02:08:53 +09:00
Seungha Yang
1fb44b8160 d3d12decoder: Fix crash on flush
On flush event, baseclass will discard all pictures from DPB
but there can be still in-flight commands not finished yet.
Use our command queue, allocator and fence data helper objects
to keep resource available during command execution.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5877>
2024-01-03 01:36:42 +09:00
Seungha Yang
d3b3a1c00a d3d12: Add {set,get}_user_data() methods to command allocator
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5877>
2024-01-03 01:19:39 +09:00
Seungha Yang
9d5277e70e d3d12decoder: Fix barrier usage
Common state promotion and decay does not seem to be applied to
decoder commands. Use barriers explicitly

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5877>
2024-01-03 01:17:32 +09:00
Edward Hervey
583fadc051 dvdspu: Support all video caps for "ANY" feature
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
2024-01-02 14:13:04 +00:00
Arnaud Vrac
705ab7e35a dvdspu: handle frame size event from upstream
An IDX file or codec_data normally contains the original frame size of
the video. Allow upstream to provide this information by sending a
custom event, which will allow scaling the overlay correctly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
2024-01-02 14:13:04 +00:00
Arnaud Vrac
559c4b8429 dvdspu: cache overlay composition
This avoids rendering the overlay buffer for each video frame.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
2024-01-02 14:13:04 +00:00
Arnaud Vrac
5919bfec5e dvdspu: negotiate overlay composition meta with downstream
This allows attaching the overlay composition as a meta on the video
buffer instead of blending with the video.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
2024-01-02 14:13:04 +00:00
Arnaud Vrac
85081cbef7 dvdspu: render to ARGB overlay instead of AYUV
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
2024-01-02 14:13:03 +00:00
Arnaud Vrac
b0ce390d50 dvdspu: render to AYUV overlay
Instead of only supporting writing SPU data directly to YUV frames,
render the SPU data to an intermediate AYUV overlay buffer. The overlay
data is then blended to the video frame.

For the PGS format, the overlay buffer size is set to the size of the
Composition Window, and its position in the overlay composition is set
to the window position. The objects to render are now cropped when the
cropping flag is set.

For the Vobsub format, the overlay buffer size is set to the size of the
Display Area.

Once rendered, the overlay composition rectangle is now moved and scaled
to fit the video output size, to avoid clipping.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
2024-01-02 14:13:03 +00:00
Seungha Yang
087e39564d d3d12videosink: Fix buffer leak
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
b0ef890726 d3d12device: Store adapter index
... and remove unused fence object

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
0577d1c9de d3d12: Reduce shader visible descriptor size
Shader visible descriptors occupy GPU resource and there are hardware
limits. Thus, in order to minimize the amount of shader visible heaps,
only non shader visible descriptor heap (staging) will be held by d3d12memory.
Then converter will copy the staging descriptor to shader visible
descriptor heap per draw.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
0ce6e752e4 d3d12: Use CREATE_NOT_ZEROED heap flag if possible
Zero initialization would have overhead and it's not required
most cases except for textures. Use CREATE_NOT_ZEROED flag
in case of buffer resource or if a texture will be rendered without any
prior read operation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
a1ba38cd64 d3d12: Add compositor element
Adding d3d12compositor element. d3d12compositor will build GPU commands
asynchronously and each command is serialized at final render stage.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
996346f8d3 d3d12converter: Don't map output buffer with write flag
Conversion will happen when constructed command list is executed,
not by converter element. Thus this object should not map output buffer
with write flag which will result in error if multiple threads
are building commands for the same output target frame.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
bffbf0d951 d3d12converter: Add support for texture upload
If buffer is not a d3d12 memory or allocated by other device,
upload to internal d3d12 memory

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
f4fe17d8d2 d3d12converter: Add support for blending
Create new PSO if blend state update is required

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:47 +00:00
Seungha Yang
7c701058ed d3d12: Add testsrc element
Adding testsrc element with d2d interop support via d3d11on12

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
2024-01-02 13:02:46 +00:00
Seungha Yang
abe1f5044d cuda: Prefer CUBIN over PTX
System installed NVRTC library might be newer version than
driver, then generate PTX can be incompatible with the driver.
Instead of the intermediate code PTX, use actual assembly code
directly.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3108
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5639>
2024-01-02 10:10:09 +00:00
Tim-Philipp Müller
bf4755331a vpx: fix plugin description
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5864>
2023-12-30 11:33:52 +00:00
Seungha Yang
7d210af46c docs: Update Windows plugins cache
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
2f091e7118 d3d12: Add video sink element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
660f2d7d27 d3d12: Add convert element
Implement converter object with convert element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
4198bd6932 d3d12: Add helper object for fence operation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
eeb57061d2 d3d12: Enable plugin only for Windows8 or newer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
3e49d6a75f d3d12: Define more formats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
48cfca413d d3d12: Add header containing core features
... and include the single header instead of listing many ones

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
41d8a12649 d3d12: Remove unused methods
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
5ce2a7f64f d3d12bufferpool: Don't pre-allocate memory for size calculation
Unlike d3d11, we can know CPU accessible memory layout without
allocation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
d316356bf2 d3d12memory: Add alloc_wrapped() method
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
3308a976bd d3d12: Add upload element
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
e4f794cbdd d3d12bufferpool: Wait fence before reusing buffer
Buffer can be released without waiting fence for previous commands

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:39:00 +00:00
Seungha Yang
1c5bba4b6b d3d12decoder: Remove ID3D12Device4 interface requirement
Old OS may not support the interface. And allow 11_0 feature level
hardware.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Seungha Yang
4e5d4a45a3 d3d12decoder: Reduce the number of resource barriers
Single barrier per texture is sufficient in case of array-of-textures.
Avoid unnecessary decay barriers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Seungha Yang
e6bdb0458c d3d12decoder: Use flexible task queue
Instead of using fixed size command allocator array, make it
resizable.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Seungha Yang
efc023e76e d3d12: Rework command scheduling
* Use single fence object per queue and remove GstD3D12Fence
  implementation
* Add a helper method for texture copy
* Run background thread and release unused resource from the thread

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Seungha Yang
6d7d9291c3 d3d12: Add resource pool objects
Adding pool objects for command list, command allocator, and descriptor
heap

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Seungha Yang
93458c0155 d3d12memory: Add more SRV/RTV getter methods
Adding a method so that memory object can create SRV/RTV
on external descriptor heap. And remove unused methods

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Seungha Yang
2578f234dd d3d12: Remove d3d11 dependency
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5870>
2023-12-29 14:38:59 +00:00
Sebastian Dröge
43fdc9e9f9 orc: Track main branch again
It's one of the projects we maintain and we should track the main branch
to make sure any regressions are caught as early as possible.

For GStreamer releases / release branches this should be pointed back to the
latest orc release tag.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5867>
2023-12-29 13:16:03 +00:00
Sebastian Dröge
5630294ce6 ptp-helper: Allow unused Stderr export
It's not used when building tests and would otherwise cause a warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5872>
2023-12-29 10:18:52 +02:00
Sebastian Dröge
c292da7044 rtpsession: Only warn once if configured latency needs to be known but isn't yet
Otherwise we would warn about this once for every single packet until
the LATENCY event is received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5854>
2023-12-27 11:00:44 +00:00
Thibault Saunier
04ae39f25b validate: scenario: Add a 'forward-eos' parameter to forward-appsink-to-appsrc
There might be cases where the user doesn't want to forward it

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:19 +00:00
Thibault Saunier
80e44ac344 validate: scenario: Handle the case where execute_next_action is called with an action that is OK
It is now a valid case when running subaction in foreign scenarios

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:19 +00:00
Thibault Saunier
93f1ffe715 validate: doc: Enhance the way we render action type parameters
And update gst-validate-action-types.md

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:19 +00:00
Thibault Saunier
f1e34de800 validate: scenario: Do not print position on sub pipelines
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:19 +00:00
Thibault Saunier
a4a97c7568 validate: doc: Enhance documentation about testfile and meta fields
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:19 +00:00
Thibault Saunier
a5a65b74ff validate: scenario: Ensure all pipelines with scenarios are stopped when exiting runner
Otherwise we end up with "dangling" sub pipelines on SIGINT

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:18 +00:00
Thibault Saunier
805641fe70 validate: doc: Update action types documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:18 +00:00
Thibault Saunier
6abc36ad34 validate: scenario: Cleanup the 'switch-track' action implementation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:18 +00:00
Thibault Saunier
fbf478b3f5 validate: scenario: Add a way to set pipeline base-time, start-time and force using the system clock
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:18 +00:00
Thibault Saunier
aad06b091e validate: scenario: Add an action type to forward stream from an appsink to an appsrc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:18 +00:00
Thibault Saunier
fd4cd3d85f validate:scenario: Add a 'create-sub-pipeline' action type
And allow running parallel pipelines, scenarios, and pass data from
one to the other using appsrc/appsink

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5803>
2023-12-27 02:14:18 +00:00
Tim-Philipp Müller
d415816cb1 rtpvrawdepay: only announce supported formats in sink template
For most video formats we currently just assume that they
have a depth of 8 bits, whilst advertising that we can
handle 8/10/12/16 bit depth.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5866>
2023-12-25 19:00:18 +01:00
Tim-Philipp Müller
888e5905d8 docs: contributing: add merging section to developer workflows
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5847>
2023-12-24 13:06:30 +00:00
Olivier Crête
e19428a802 onnx: Update build instructions to use onnx-runtime 0.16.3
This synchronizes it with the meson.build file

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5861>
2023-12-22 14:43:23 -05:00
Michael Tretter
57a4d521fd videorate: keep pool if max_buffers is unlimited
The value 0 for max_buffers means unlimited. If the max_buffers are unlimited,
the videorate element shouldn't throw away the bufferpool, but just increase the
min_buffers value.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5857>
2023-12-22 17:46:50 +00:00
Víctor Manuel Jáquez Leal
fdfd51397b vajpegdec: only support progressive mjpeg streams
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
ec4054e637 jpegparse: always forward pixel-aspect-ratio
And by default it's 1/1

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
ae55ebfdf2 jpegparse: fix endianness
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
470b90a14a jpegparse: on app0 use fourcc rather than strings
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
367deef132 jpegparse: dump whole failed app marker
Instead of just log the parsed string. It's better for debugging.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
658b5b4399 jpegparse: don't trigger message for failed com marker
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
497890f678 jpegparse: refactor renegotation
Instead of comparing caps, just signal when renegotation is needed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
03d51244c0 jpegparse: pass colorimetry in caps
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Víctor Manuel Jáquez Leal
20b636ee9a jpegparse: add support interlaced mjpeg
Interlaced MJPEG is a big hack. Most of the streams we've found are from old
AVID tools. There are two methods to detect interlaced stream: the container
offers a height bigger (or double) than the image's height in SOF. The other
is from a APP0 marker.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
2023-12-22 04:38:06 +00:00
Jordan Petridis
b39b178dd7 subprojects: update glib wrap to 2.78.3
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5849>
2023-12-21 19:22:25 +02:00
Sebastian Dröge
c9c26eab26 rtpvp8pay: Also set partition IDs in the packets if meta exists but without temporal_scalability
Encoders will add the meta to every single buffer, but we only cannot set
partition IDs properly when the meta has temporal_scalability set

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5814>
2023-12-21 11:26:49 +00:00
Aaron Boxer
e2ee207367 onnx: add README outlining install and test instructions
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5816>
2023-12-20 14:48:41 -05:00
Marek Vasut
5f3d4215a0 v4l2codecs: Switch gst_codec_picture_ts_ns() to gst_util_uint64_scale_int()
Instead of plain multiplication, use gst_util_uint64_scale_int()
to achieve the same effect with additional checks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
3335af0efe v4l2codecs: Deduplicate picture frame number to timestamp in ns
Add macro which converts picture frame number to suitable timestamp in
nanoseconds for use in V4L2 VB2 buffer lookup. Since multiple codecs do
the same operation and almost all got it wrong, do it in one place so it
can be fixed in one place again, if needed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
552a171671 vp9decoder: Simplify gst_v4l2_codecs_vp9_dec_fill_refs()
In case reference_frames is NULL, return outright. Remove the
duplicate check from subsequent conditionals. No functional change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
4560cdff5c h265decoder: Align wraparound fix
Instead of casting GST_CODEC_PICTURE_FRAME_NUMBER (ref_pic) to u64,
use 1000ULL which is also u64 . This only aligns the behavior here
with '*decoder: Fix multiplication wraparound' commits.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
7725aa7d77 h264decoder: Align wraparound fix
Instead of casting GST_CODEC_PICTURE_FRAME_NUMBER (ref_pic) to u64,
use 1000ULL which is also u64 . This only aligns the behavior here
with '*decoder: Fix multiplication wraparound' commits.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
3cbf09d0c9 mpeg2decoder: Fix multiplication wraparound
The GstMpeg2Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecMpeg2Dec *_ref_ts multiplication result is u64 .

```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```

so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during MPEG2 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .

Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
50fb6f8c02 av1decoder: Fix multiplication wraparound
The GstAV1Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecAV1Dec v4l2_av1_frame.*_frame_ts multiplication result is u64 .

```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```

so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during AV1 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .

Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
6f74818a07 vp9decoder: Fix multiplication wraparound
The GstVp9Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecVp9Dec v4l2_vp9_frame.*_frame_ts multiplication result is u64 .

```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```

so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during VP9 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .

Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Marek Vasut
15c9a6caa9 vp8decoder: Fix multiplication wraparound
The GstVp8Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecVp8Dec v4l2_vp8_frame.*_frame_ts multiplication result is u64 .

```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```

so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during VP8 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .

Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
2023-12-20 18:47:39 +00:00
Xavier Claessens
71b51f1077 ntv2: Use a patch overlay instead of diff
It is easier to maintain plain meson.build file instead of a diff. We
can edit it directly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5843>
2023-12-20 18:18:43 +00:00
Mengkejiergeli Ba
141cd38715 h264parse: Remove dead code
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5833>
2023-12-20 13:03:25 +00:00
Sebastian Dröge
2e86fb691a video-format: Fix format order once again
RGBA should be before RBGA. Both the Python script and the gstreamer-rs
tests agree on that, but somehow this is not caught by the CI.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5837>
2023-12-20 05:33:43 +00:00
Olivier Crête
f5d5f2cf1a meta: Add API to register metas in two steps
And also remove the specific registration APIs for
serializable meta.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5830>
2023-12-19 22:41:31 +00:00
Olivier Crête
2a9c4e3270 meta: Move the clear operation to its own vfunc
Some transforms always assumed that the transformation was some kind
of copy. So adding a "clear" operation didn't work out in practice.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5830>
2023-12-19 22:41:31 +00:00
Nicolas Dufresne
73338aa1ae doc: baseparse: Clarify consumed vs output size
When we finish a frame, we pass a size which semantic can easily be confused.
Improve the documentation to clarify that the parameter size is the amount of
input data being consumed and, if set, the output_buffer size can differ.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5754>
2023-12-19 16:08:08 -05:00
Chao Guo
2e75b8c8e9 v4l2object: clear old fds in poll when closing v4l2object
When reopening a v4l2 device, the v4l2object->poll will include some old fds,
which was assigned to this device before. If the pipeline opens multiple v4l2
devices, the old fd may been assigned to other v4l2 devices when reopening
devices.

This will cause the timing of the pipeline become confusing when polling devices,
leading functional abnormalities.

Therefore, when closing v4l2object, remove the old fds in poll to ensure that the
pipeline timing is normal.

Signed-off-by: Chao Guo <chao.guo@nxp.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5820>
2023-12-19 15:23:23 +00:00
Philippe Normand
61d3f5c8e0 play: Include pipeline dump in error details structure
This can be useful for debugging purposes. It can't be done on application side
because the on_error callback tears down the pipeline.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5828>
2023-12-18 20:13:38 +00:00
Philippe Normand
c6c567e3e4 play: Fix error details parsing
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5828>
2023-12-18 20:13:38 +00:00
Robert Mader
c481fe7059 camerabin: Correctly relink viewfinderbin_queue
This reverts a part of de92a6c7f2. Unlike `image_filter` and
`video_filter`, `viewfinder_filter` does not get linked to `src` but
`viewfinderbin_queue`. Thus the fix in the mentioned commit does not
apply for it and should be reverted.

This was not spotted earlier as only the other filters are used in
the project that uncovered the issue.

Fixes: de92a6c7f2 ("camerabin: Fix source updates with user filters")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5689>
2023-12-18 17:07:31 +00:00
Seungha Yang
890d59e97e av1parser: Fix array sizes in scalability structure
Since the AV1 specification is not explicitly mentioning about
the array size bounds, array sizes in scalability structure
should be defined as possible maximum sizes that can have.

Also, this commit removes GST_AV1_MAX_SPATIAL_LAYERS define from
public header which is API break but the define is misleading
and this patch is introducing ABI break already

ZDI-CAN-22300

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5823>
2023-12-18 10:58:24 +00:00
Guillaume Desmottes
b603095ac3 audioconvert: change gst_audio_convert_get_unit_size() log levels
INFO is a bit high for such technical details and best to use WARNING
when it fails.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5822>
2023-12-18 10:07:39 +00:00
Edward Hervey
2d57bec920 decodebin3: Don't send sticky events to unlinked decoder
This causes a lot of nasty side effects (like decoders assuming they are
actually linked downstream).

The reason why this was done was to check whether a decoder could handle the
actual caps, but this is the wrong way to do it.

The proper way to query whether a decoder can handle certain caps is via
`GST_QUERY_ACCEPT_CAPS` which is already done just before.

Partially reverts !4677 and partially fixes #3160

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5821>
2023-12-18 09:29:52 +01:00
Xavier Claessens
533f814fd9 h264parse: test - AU align with SEI between frame slices
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5741>
2023-12-17 21:42:47 +00:00
Daniel Morin
49f200cb54 h264parse: Improved AU boundary detection
- AU boundary detection reviewed to follow more closely H.264 spec. and more
  specifically clauses 7.4.1.2.3 and 7.4.1.2.4.
- The gist of the changes is a look-a-head in then next AU required identify the
  last vcl-nal of current AU and firt vcl-nal of next AU (according to
  7.4.1.2.4) followed by the identification of the first nal of next AU
  (according to 7.4.1.2.3).
- A backlog of all nals of current AU and next AU up to the point where current
  AU can identified completed is kept.
- In NAL alignement mode vcl-nal are sent immediatly but the history is kept to
  allow AU boundary detection. Non-vcl-nal can be delayed up to the reception of
  the next vcl-nal to allow a correct AUD insertion.
- Based on this improved AU boudary detection we can avoid erronous AUD
  insertion, like the one highlighted by test
  test_parse_sliced_with_prefix_and_sei_nal_au.
- Add support for MVC AU boundary detection. (H.7.4.1.2.4)
- Explicitly report SVC not supported. We don't have the SVC NAL parsing
  required to identify boundary. (missing dependency_id and quality_id fields
  from SVC, see G.7.4.1.2.4)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5741>
2023-12-17 21:42:47 +00:00
Xavier Claessens
f545e79bee meta: gst_meta_serialize() is not introspectable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
2023-12-17 16:13:26 +00:00
Xavier Claessens
f076a9bf2f unixfd: Serialize buffer metas
Serialize every GstMeta that supports serialization into the NEW_BUFFER
payload. This is especially important for GstVideoMeta in the case of
multiplanar buffers, or if stride!=width.

Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
2023-12-17 16:13:26 +00:00
Xavier Claessens
06d9d934f9 meta: Add serialize/deserialize API
This allows metas to be serialized to be transmitted or stored. This is
intended to be used for example by gdppay or unixfdsink.

Implemented on GstCustomMeta, GstVideoMeta, GstReferenceTimestampMeta,
and GstAudioMeta.

Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
2023-12-17 16:13:26 +00:00
Xavier Claessens
9501d64ccd structure: Add GST_SERIALIZE_FLAG_STRICT
It makes serialization succeed only if all values have a type that can
be deserialized.

Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
2023-12-17 16:13:26 +00:00
Xavier Claessens
899d08722a buffer: Remove trailing space
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
2023-12-17 16:13:26 +00:00
Philippe Normand
84d9e5b6e7 avviddec: Calculate latency only for fixed framerate
The framerate was checked correctly in _negotiate, but not in _set_format.

Also fix loss of precision in _negotiate when calculating the framerate.

Fixes #3093

Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5600>
2023-12-17 12:48:44 +00:00
Sebastian Dröge
c4789e6de5 audio: Consider the expected timestamp for discont-wait handling
Otherwise if there is a huge gap it will only be considered a
discontinuity after another discont-time amount of buffers has passed.

Like this it will be immediately a discontinuity if the gap between the
expected and received time becomes bigger than the discont-time.

The last part of the test was actually testing for this behaviour and
expected the previous behaviour. Most other tests also had to be
adjusted because discont will now happen at slightly different times
than before.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5759>
2023-12-17 12:01:27 +00:00
He Junyan
35390de50d vacompositor: consider the DMA kind input for sink pad
Co-authored-by: Víctor Jáquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5160>
2023-12-16 10:56:09 +00:00
He Junyan
0bbaa00c3f vacompositor: Override the update_caps() of video aggregator class
The input of the vacompositor may be DMA buffers. And in this case, the input
caps has the format=DMA_DRM, which can not be recognized by base video
aggregator class' find_best_format() function. So we need to override the
update_caps() virtual function.

Also we consider the DMA kind caps in negotiated_src_caps() for output.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5160>
2023-12-16 10:56:09 +00:00
He Junyan
e68724c8e0 vacompositor: add helper function to get formats from caps
Co-authored-by: Víctor Jáquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5160>
2023-12-16 10:56:09 +00:00
He Junyan
c76999fe7b vacompositor: add helper function to choose format
The function is based on the most supported formats by Intel/Mesa VA drivers.

Co-authored-by: Víctor Jáquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5160>
2023-12-16 10:56:09 +00:00
He Junyan
eb4d2dd204 vacompositor: record the input caps for each input pad
The caps of each input sink pad wil decide the final output format and
caps of the src pad.

Co-authored-by: Víctor Jáquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5160>
2023-12-16 10:56:09 +00:00
Arun Raghavan
ee903a5afd rtp: Fix incorrect RTP channel order lookup by name
The g_ascii_strcasecmp() logic is inverted, since it returns 0 on equality.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5815>
2023-12-15 15:21:20 -05:00
Seungha Yang
800a83b435 d3d12decoder: Implement threaded decoding
To achieve maximum throughput, waiting on command commit thread
is not ideal. And render-delay will introduce unwanted latency.
Best is to split thread and wait finished decoding job in a dedicated
output thread

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
2023-12-15 22:56:33 +09:00
Seungha Yang
7471db9a30 d3d12decoder: Disable d3d11 interop
It does not seem to work with some AMD iGPU

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
2023-12-15 20:40:21 +09:00
Seungha Yang
7afa914054 d3d12fence: Reset fence after waiting done
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
2023-12-15 19:48:40 +09:00
Seungha Yang
a24a155279 d3d12: Enable debug layer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
2023-12-15 19:48:40 +09:00
Seungha Yang
7443cc00b5 d3d12: Requires ID3D12Device4 interface
ID3D12Device4::CreateCommandList1() method is required

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
2023-12-15 19:48:39 +09:00
Seungha Yang
818c95e8c3 d3d12: Update allocation params signalling
Sync up with d3d11 implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
2023-12-15 19:48:36 +09:00
Eva Pace
e5194d4c45 examples: webrtc: update sendrecv dependencies
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5809>
2023-12-14 21:14:48 +00:00
Eva Pace
c43c550c06 examples: webrtc: update multiparty-sendrecv dependencies
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5809>
2023-12-14 21:14:48 +00:00
Eva Pace
009e286375 examples: webrtc: ignore rust target folders
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5809>
2023-12-14 21:14:48 +00:00
Eva Pace
914d46c02f examples: webrtc: update janus dependencies
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5809>
2023-12-14 21:14:48 +00:00
Xavier Claessens
d2fb30a188 devenv: Whitelist all plugins to be able to run tests
Meson devenv already overrides GST_PLUGIN_PATH and
GST_PLUGIN_SYSTEM_PATH so only built plugins can be found. That means
unit tests are allowed to use every plugins.

This makes easier to run some unit tests under devenv instead of through
"meson test".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5748>
2023-12-14 15:09:35 +00:00
Víctor Manuel Jáquez Leal
8210784dab vabasedec: clean up decide_allocation() vmethod
When creating a new VA pool set config size to zero because it's not used.

Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
2023-12-14 12:50:32 +00:00
Víctor Manuel Jáquez Leal
4fab6bb45a vabasetransform: clean up decide_allocation() vmethod
When creating a new VA pool set config size to zero because it's not used.

Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
2023-12-14 12:50:32 +00:00
Víctor Manuel Jáquez Leal
33e49023ff vacompositor: clean up decide_allocation() vmethod
When creating a new VA pool set config size to zero because it's not used.

Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
2023-12-14 12:50:32 +00:00
Víctor Manuel Jáquez Leal
1c7ce208bd vapluginsutils: add helper gst_va_create_other_pool()
This helper function creates a software-based buffer pool, where if size is
zero, its value is retrieved from the canonical size.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
2023-12-14 12:50:32 +00:00
Víctor Manuel Jáquez Leal
4a22cc8fb3 va: no need to provide a buffer size for VA pool
VA drivers allocate surfaces given their properties, so there's no need to
provide a buffer size to the VA pool.

Though, the buffer size is provided by the driver, or the canonical size
is used for single planed surfaces.

This patch removes the need to provide a size for the function
gst_va_pool_new_with_config() and adds a helper method to retrieve the surface
size, gst_va_pool_get_buffer_size(). Also change the callers accordingly.

Changes for custom VA pool creation will be addressed in the following commits.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
2023-12-14 12:50:32 +00:00
Seungha Yang
fab1c5f953 d3d12: Use d3dx12.h helper library
... and remove manually implemented helper methods

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5807>
2023-12-14 18:08:00 +09:00