This will only make use of the framerate if the subclass is chaining up
BaseSink::set_caps(). Otherwise it will have the same behaviour as the
basesink default.
Doing so is useful if video buffers don't contain a duration to
calculate a default duration, and various video sinks already implement
a custom version of this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/986>
Elements operating in pull mode may optionally pass a buffer to
pull_range that should be filled with the data. The only element
that does that at the moment is oggdemux operating in pull mode.
tagdemux currently creates a sub-buffer whenever a buffer pulled
from upstream (filesrc, usually) needs to be trimmed. This creates
a new buffer, however, so disregards any passed-in buffer from a
downstream oggdemux.
This would cause assertion failures and playback problems for
ogg files that contain ID3 tags at the end.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/848
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/994>
This situation happens in the situation where an input stream has a framerate
exceeding the timeout latency (Ex: 1fps with a latency of 500ms) and an input
stream greater than output framerate (ex: 60fps in, 30 fps out).
The problem that would happen is that we would timeout, but then buffers from
the fast input stream would only be popped out one by one.... until a buffer
reaches the low-framerate input stream at which point they would quickly be
popped out/used. The resulting output would be "slow ... fast ... slow ... fast"
of that input fast stream.
In order to avoid this situation, whenever we detect a late buffer, check if
there's a next one and re-check with that one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/990>
When filling the checker pattern from multiple threads, y_start
needs to be taken into account to determine the shade of the
current pixel.
Example pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw, width=1920, height=1080, format=I420 ! \
queue ! compositor sink_0::xpos=200 ! video/x-raw, format=I420 ! videoconvert ! \
xvimagesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/988>
The initial byte offset should be calculated from the stride,
not from the dest_add variable
Example pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw, width=1920, height=1080, format=YUY2 ! \
queue ! compositor sink_0::xpos=200 ! video/x-raw, format=YUY2 ! xvimagesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/988>
The correct way to determine the byte offset at a certain yoffset
in a subsampled component is to shift the yoffset by the component's
hsub
This fixes out-of-bounds memory accesses and visible artefacts,
example pipeline with the samples from #802:
gst-launch-1.0 compositor name=vmixer sink_1::xpos=1910 sink_1::ypos=1080 ! \
videoconvert ! videorate ! xvimagesink \
filesrc location=VID_20200723_203606.mp4 ! decodebin name=demux1 ! \
queue ! videoflip method=vertical-flip ! vmixer. \
filesrc location=bridgeoverstubbledwater.mp4 ! decodebin name=demux2 ! \
queue ! vmixer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/988>
This was only taken care of previously if there was a decoder before.
However if previously a decoder was not needed then the ghostpad
would've been linked directly to the slot's srcpad.
Reconfiguring the slot requires this to be undone so that linking can
happen normally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/985>
Fix the following build failure with gcc 4.8 which has been added with
d268c193ad:
../gst-libs/gst/video/gstvideoaggregator.c: In function 'gst_video_aggregator_init':
../gst-libs/gst/video/gstvideoaggregator.c:2762:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (gint i = 0; i < gst_caps_get_size (src_template); i++) {
^
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/974>
libvisual api expects a priv data pointer to be passed, though we know its
going to be `GstDebugLevel`.
```
../subprojects/gst-plugins-base/ext/libvisual/plugin.c:33:39: error: cast to smaller integer type 'GstDebugLevel' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
GST_CAT_LEVEL_LOG (libvisual_debug, (GstDebugLevel) (priv), NULL, "%s - %s",
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/975>
First: the buffer is pushed on the encoding filesink only *after* the
checkpoints, leading to wrong ordering in expectations.
The second one is about EOS being posted on the bus *before* the
stop action is executed, leading to the action never being executed.
That action was plain useless as the default behavior of validate
scenario is to internally create a "stop" action on EOS (unless
disabled by user).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/968>
Add a way for applications to specify that the underlying file is
growing which implies that the source won't EOS when reaching the end
of the file but instead start monitoring it and start reading it again
whenever a change is detected.
Also add a validate test to check the behavior
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/937>
We've been allowing only a few known chroma-site values such as
jpeg (not co-sited), mpeg2 (horizontally co-sited) and
dv (co-sited on alternate lines). That's insufficient for
representing all possible chroma-site values. By this commit,
we can represent any combination of chroma-site flags.
But, an exception here is that any combination with
GST_VIDEO_CHROMA_SITE_NONE will be considered as invalid value.
For any combination of chroma-site flags,
gst_video_chroma_to_string() method is deprecated in order to
return newly allocated string via a new gst_video_chroma_site_to_string()
method. And for consistent API naming, gst_video_chroma_from_string()
is also deprecated. Newly written code should use
gst_video_chroma_site_from_string() instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/927>
audiobasesrc's setcaps contains an optimization that makes it not re-
acquire the ringbuffer if the caps have not changed. However, it doesn't
check if it has successfully acquired it or not. It's possible to have
the caps set but not having ringbuffer acquired if the previous attempt
to acquire fails.
This commit replaces the caps existence check with whether the
ringbuffer is acquired or not. There's no need to check for caps
existence because 1.) it's unlikely to be NULL if the ringbuffer is
acquired, and 2.) _setcaps shouldn't be called with a NULL caps.
This should also let the element retry on acquiring ringbuffer after an
error by re-setting the element's state to READY and back to PLAYING.
Whether this behavior is correct is up for debate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/512>
The sink_query just uses context, other_context and display to query info.
But all these objects can be changed or distroyed in state_change() func
and other places.
This patch is not very perfect. The condition race still exists in other
places in this element. All the functions directly access these objects
without protection. Most of them are executed when the data is pushing and
draw context/window have already been established, so they should not have
problems. But the sink_query and propose_allocation functions are the query
-like functions and executed in query context, which can be called in any
state of the element. So it can cause some crash issues because of destroyed
context object.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/922>
New signals are added for managing the internal list of rtp header
extension implementations read by a specific depayloader instance.
If the 'extmap-$NUM' field is present in the src caps, then an
extension implementation will be requested but is not required to be able
to negotiate correctly. An extension will be requested using the
'request-extension' signal if none could be found internally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/748>
New signals are added for managing the internal list of rtp header
extension implementations read by a specific depayloader instance.
If the 'extmap-$NUM' field is present in the sink caps, then an
extension implementation will be requested but is not requited to be
able to negotiate correctly. An extension will be requested using the
'request-extension' signal if none could be found internally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/748>
