Leverage response from gst_rtsp_connection_connect_with_response to
determine if the connection should be retried using authentication. If
so, add the appropriate authentication headers based upon the response
and retry the connection.
https://bugzilla.gnome.org/show_bug.cgi?id=749596
The string could exist but with a wrong format, in that case we still want
to reset the values of client_port_range.min and max like we do if there is
no string.
CID 1139593
We would queue 5 consective packets before considering a reset and a proper
discont here. Instead of expecting the next output packet to have the current
seqnum (i.e. the fifth), expect it to have the first seqnum. Otherwise we're
going to drop all queued up packets.
When working in push-mode, we attempt to push out everything currently
buffered in the adapter.
This has two pitfalls:
* We could stop earlier (the moment we get a non-ok or non-not-linked)
* We return the last combined flow return, which might be completely
different from the previous combined flow return
There might be multiple LOAS config in a row in a full frame. The first
one might be a multi-layer config (which we can't properly parse yet)...
but then followed by a valid (single-layer) one.
The code was previously skipping whole frames (instead of just the LOAS
config we failed to read) resulting in multiple frames (seen up to 6s in
some situation) being dropped before finally getting the configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=758826
auds.blockalign is set once the first caps arrive. If
gst_avi_mux_stop_file() is called before this happens then auds.blockalign
is zero and gst_avi_mux_audsink_set_fields() cause a crash:
[...]
avipad->parent.hdr.rate = avipad->auds.av_bps / avipad->auds.blockalign;
[...]
https://bugzilla.gnome.org/show_bug.cgi?id=758912
It's not enough to have timeout or event based SPS/PPS information sent
in RTP packets. There are some scenarios when key frames may appear
more frequently than once a second, in which case the minimum timeout
for "config-interval" of 1 second for sending SPS/PPS is not sufficient.
It might also be desirable in general to make sure the SPS/PPS is
available with every keyframe (packet loss aside), so receivers can
actually pick up decoding immediately from the first keyframe if
SPS/PPS is not signaled out of band.
This patch adds the possibility to send SPS/PPS with every key frame. This
mode can be enabled by setting "config-interval" property to -1. In this
case the payloader will add SPS and PPS before every key (IDR) frame.
https://bugzilla.gnome.org/show_bug.cgi?id=757892
This way we can use -1 as special value, which is nicer than MAXUINT.
This is backwards compatible even with the GValue API, as shown by
a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=757892
generate_rtcp can produce empty packets when reduced size RTCP is turned on.
Skip them since it doesn't make sense to push them and they cause errors with
elements that expect RTCP packets to contain data (like srtpenc).
When seeking back to restore the mdat position a flush is pushed
through and it resets downstream segment information. Make sure
that after the flush (that does a soft reset) a segment will
be pushed again
Fixes regressions spotted at
https://ci.gstreamer.net/job/GStreamer-master-validate/2100/
10 FourCCs generated with GST_MAKE_FOURCC() in gstqtmux.c and atoms.c
already exist in fourcc.h. Don't duplicate these and use them directly.
Plus moving 6 to fourcc.h, to centralize them all.
This fixes seeking if the first entries in the samples table are negative. The
binary search would always fail on this as the array would not be sorted if
interpreting the negative numbers as huge positive numbers. This caused us to
always output buffers from the beginning after a seek instead of close to the
seek position.
Also add a case to the comparison function for equality.
Actual code is checking for a NULL terminator and a ';' terminator,
for backward compat, in a chained way that cause all events being rejected.
The proper condition is to reject the events when terminator isn't
in ['\0', ';'] set.
https://bugzilla.gnome.org/show_bug.cgi?id=758151
It would be unusual to have the header segment with an 'edts' atom
indicating gaps at the beginning when handling fragmented streams.
The header usually doesn't contain any timestamping information, this
should come from the playlist/manifest and the segments with media
in those scenarios.
https://bugzilla.gnome.org/show_bug.cgi?id=758171
On POSIX, IP_MULTICAST_LOOP is a setting for the sender socket. On Windows it
is a setting for the receiver socket. As such we will need it on udpsrc too to
allow filtering out our own multicast packets.
In push-mode it is hard to support qt segments overall but it is
possible to support when the file isn't heavily edited but just contain
a segment to indicate a gap at the beginning. This also allows properly
timestamping data that has negative DTS in push-mode.
It is relevant to support those for 2 scenarios:
1) fragmented streaming
2) HTTP playback of 'regular' mp4
https://bugzilla.gnome.org/show_bug.cgi?id=753484
No need to use G_GINT64_FORMAT for potentially negative values of
GstClockTimeDiff. Since 1.6 these can be handled with GST_STIME_ARGS.
Plus it creates more readable values in the logs.
https://bugzilla.gnome.org/show_bug.cgi?id=757480
For the MS/VfW codec ids, we want to write DTS timestamps instead
of PTS because that's what everyone else seems to do (and it's also
how it is in AVI). So for those input formats we use the buffer DTS
instead of the PTS. However, if there's no DTS set but only the PTS
then just take the PTS instead of dropping the input buffer. This
is useful especially for I-frame only codecs like JPEG and huffyuv,
but should also be fine as fallback in general.
Fixes regression with input JPEG frames that only have PTS set on them.
https://bugzilla.gnome.org/show_bug.cgi?id=756967
Instead, delay it until all request pads have been released. This is
because the release_pad() vfunc requires the multiqueue and muxer to
be there in order to release their request pads as well. If those
elements are destroyed earlier, release_pad() does not work, no
pads are released and some resources are leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=753622
We have to reverse all samples in a buffer before processing them to properly
have continuous data from one buffer to another. As a result we will have a
negative applied rate and a rate of 1.0.
Also make sure that input buffers are correctly clipped to the segment,
otherwise our calculations are going to go wrong.
Also copy over the segment event's sequence number to the output segment while
we're at it.
https://bugzilla.gnome.org/show_bug.cgi?id=757033
Implement accept-caps handler to avoid doing a full caps query
downstream to handle it.
This commit implements accept-caps as a simplification of the _getcaps
function, so it exposes the same limitations that getcaps would.
For example, not accepting renegotiation to caps with capsfeatures when
it was last configured to a caps that it has to deinterlace.
If the QtDemuxStream are re-used they may already have caps which used
to be leaked.
Reproduced using the
validate.dash.playback.seek_forward.dash_exMPD_BIP_TC1 validate
scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=756561
Negotiation to audio/x-raw,format=S8 was not possible because S8 does
not have a bit order so we ended up doing `if (!entry.fourcc) goto refuse_caps;`
https://bugzilla.gnome.org/show_bug.cgi?id=756387
They now use the new GstAudioVisualizer base class
from gst-plugins-base/gst-libs/gst/pbutils
Also fixed undefined reference to gst_audio_visualizer_get_type
Added GST_PLUGINS_BASE_LIBS to Makefile.am and re-order LIBADD.
https://bugzilla.gnome.org/show_bug.cgi?id=742875
Add statitics from each rtp source to the rtp session property.
'source-stats' is a GValueArray where each element is a GstStructure of
stats for one rtp source.
The availability of new stats is signaled via g_object_notify.
https://bugzilla.gnome.org/show_bug.cgi?id=752669
Buffer is added to the internal cache, and pushed only when accumulated
buffer duration crosses 200 ms. So when the chain ends, the buffer accumulated
is not freed. Freeing the cache when the state changes from PAUSED to READY.
https://bugzilla.gnome.org/show_bug.cgi?id=754212
By not doing this, the muxer is not effectively a rtpmuxer, rather a
funnel, since it should be a single stream that exists the muxer.
If not specified, take the first ssrc seen on a sinkpad, allowing upstream
to decide ssrc in "passthrough" with only one sinkpad.
Also, let downstream ssrc overrule internal configured one
We hence has the following order for determining the ssrc used by
rtpmux:
0. Suggestion from GstRTPCollision event
1. Downstream caps
2. ssrc-Property
3. (First) upstream caps containing ssrc
4. Randomly generated
https://bugzilla.gnome.org/show_bug.cgi?id=752694
If seeking targets an empty segment skip it as there is no media
offset to get from it. Instead look for the next one.
This doesn't make seeking in push-mode work if you seek to an
empty segment but at least won't get you to wrong offsets.
https://bugzilla.gnome.org/show_bug.cgi?id=753484
mux_start_time refers to the running_time of the buffer
that goes first in the output file. Normally this time is
0, so this variable is initialized to 0 during the state
change to PAUSED.
However, when dealing with dynamic pipelines and starting
a recording while the pipeline has already run for a while,
the running_time of the first buffer is > 0 and this causes
a problem with detecting the end of the first file(s) when
splitting by duration, because the code will later compare
the threshold_time with (last buffer running_time - mux_start_time)
and will get it wrong until mux_start_time advances enough
to make this difference < threshold_time, creating empty files
in the meantime.
https://bugzilla.gnome.org/show_bug.cgi?id=753624
During reverse playback, the media should stop playing at segment.start
This does not happen, and avidemux continues to process data even when
current timestamp is less that segment.start.
https://bugzilla.gnome.org/show_bug.cgi?id=755094
Avoid using default accept-caps handler that will query downstream
and is more expensive. Just check if the caps is compatible with
the template and check if the channels are the same.
Caps from the pad template are being leaked. In any case it is
from a static pad template and will 'leak' in the end, just doing
the cleanup for the good practice.
On reading LOAS config, flag v=1 and vA=1 combination can occur, leading to warning
"Spec says "TBD"...". Returning TRUE on this case while parameters 'sample_rate' and
'channels' are pointing to uninitialized values can end on setting random values as
rate and channels on src caps.
https://bugzilla.gnome.org/show_bug.cgi?id=755611
Otherwise we end up considering the values did not change and we wrongly
work with the old video format (which will lead to wrong
behaviour/segfaults).
https://bugzilla.gnome.org/show_bug.cgi?id=755621
eceb2ccc73 broke segment seeks by always
accumulating segments manually when activating a segment. This is only
needed when handling edit lists, not when activating a segment because of a
seek. Do the accumulation when switching edit list segments instead.
This fixes segment seeks again, while keeping edit lists playback working.
https://bugzilla.gnome.org/show_bug.cgi?id=755471
* use g_list_free_full(), don't iterate elements maually when freeing
* call gst_rtp_*_pay_clear_packet(), don't duplicate its code
* use gst_buffer_unref() to clarify that it is buffers being released,
instead of refering directly to gst_mini_object_unref()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755277
It's normal when dropping into the middle of a stream to
not always have the config available immediately, so skip LOAS
until a valid config is seen without either setting invalid
caps or erroring out.
https://bugzilla.gnome.org/show_bug.cgi?id=751386
flac contains the sample offset in the frame header, so after a seek
without index flacparse will know the exact position we landed on and
timestamp buffers accordingly. It only set the pts though, which means
the baseparse-set dts which was set to the seek position prevails, and
since the seek was based on an estimate, there's likely a discrepancy
between where we wanted to land and where we did land, so from here on
that dts/pts difference will be maintained, with dts possibly multiple
seconds ahead of pts, which is just wrong. The easiest way to fix this
is to just set both pts and dts based on the sample offset, but perhaps
parsed audio should just not have dts set at all.
https://bugzilla.gnome.org/show_bug.cgi?id=752106
One-line removal of tags_written++
This should fix rtmp output to crtmpserver, and hopefully
noone is expecting that the element count includes the end
element, as different bits of documentation say different
things about whether it should or not.
https://bugzilla.gnome.org/show_bug.cgi?id=661624
Apparently the Microsoft Azure RTMP server requires that the
videodatarate and audiodatarate metadata be provided, so
set those, even if it's to 0. Use the actual input bitrate
tags if available.
In parse_keymgmt(), don't mutate the input string that's been passed
as const, especially since we might need the original value again if
the same key info applies to multiple streams (RTX, for example).
When a resource is 404, and we have auth info - retry with the auth
info the same as if we had receive unauthorised, in case the resource
isn't even visible until credentials are supplied.
Fix a memory leak handling Mikey data.
When generating a random keystring, don't overrun the 30 byte
buffer by generating 32 bytes into it.
In gst_smpte_collected(), check upfront if input formats are same
or not. This avoids allocation of in1 and in2 buffers and
subsequent memory leak when input formats do not match.
https://bugzilla.gnome.org/show_bug.cgi?id=754153
When we haven't started yet, set the start_index when we set the index property,
so that we start at the right index position after the initial seek. The index
property was never really meant to be for writing, but it used to work, so let's
support it for backwards compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=739472
Commit 7d7e54ce68 added support for
DASH common encryption, however commit
bb336840c0 that went onto master
shortly before the CENC commit caused the calculation of the CENC
aux info offset to be incorrect.
The base_offset was being added if present, but if the base_offset
is relative to the start of the moof, the offset was being added twice.
The correct approach is to calculate the offset from the start of the
moof and use that offset when parsing the CENC aux info.
Sometimes it is useful to know this information on the
server side. Other popular implementations (vlc, ffmpeg, ...)
also send this header on every message.
This includes a new "user-agent" property that the user
can set to use a custom User-Agent string. The default
is "GStreamer/<version>"
https://bugzilla.gnome.org/show_bug.cgi?id=750101
Use constantDuration to calculate the timestamp of non-first AU in the
RTP packet.
If constantDuration is not present in the MIME parameters, its value
must be calculated based on the timing information from two consecutive
RTP packets with AU-Index equal to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=747881
The payloader didn't copy anything so far, the depayloader copied every
possible meta. Let's make it consistent and just copy all metas without
tags or with only the video tag.
https://bugzilla.gnome.org/show_bug.cgi?id=751774
This commit adds support for ISOBMFF Common Encryption (cenc), as
defined in ISO/IEC 23001-7. It uses a GstProtection event to
pass the contents of PSSH boxes to downstream decryptor elements
and attached GstProtectionMeta to each sample.
https://bugzilla.gnome.org/show_bug.cgi?id=705991
GstRTSPMedia uses this classification to detect the real payloader
inside a dynpay bin and asserts if it doesn't find it, therefore
it is required
https://bugzilla.gnome.org/show_bug.cgi?id=753325
Initialize the PT to the default value of the codec and check if
it is still the default before declaring the pt to be dynamic or
not when setting the caps.
Also use the PT constants from the rtp lib when possible
https://bugzilla.gnome.org/show_bug.cgi?id=747965
We need a proper caps event from upstream with the full RTP caps as we can't
create caps ourselves from thin air. Fixes usage of rtpstreamdepay after e.g.
a filesrc or any other element that supports pull mode.
https://bugzilla.gnome.org/show_bug.cgi?id=753066
h264parse does the same, let's keep the behaviour consistent. As we now
include the codec_data inside the stream too here, this causes less caps
renegotiation.
The spec says:
When a picture parameter set NAL unit with a particular value of
pic_parameter_set_id is received, its content replaces the content of the
previous picture parameter set NAL unit, in decoding order, with the same
value of pic_parameter_set_id (when a previous picture parameter set NAL unit
with the same value of pic_parameter_set_id was present in the bitstream).
If the GOP is completed, pads have to start gathering for the
next one but it is possible that the the state might go to
COLLECTING_GOP_START and back to WAITING_GOP_COMPLETE before the
thread has a chance to wake up and proceed, leaving it trapped in
the check_completed_gop loop and deadlocking the other threads
waiting for it to advance.
To solve it, this patch also checks that tha input running time
hasn't changed to prevent this scenario.
h264parse does the same and this fixes decoding of some streams with 32 SPS
(or 256 PPS). It is allowed to have SPS ID 0 to 31 (or PPS ID 0 to 255), but
the field in the codec_data for the number of SPS or PPS is only 5 (or 8) bit.
As such, 32 SPS (or 256 PPS) are interpreted as 0 everywhere.
This looks like a mistake in the part of the spec about the codec_data.
In media to caps function, reserved_keys array is being used for variable i,
leading to GLib-CRITICAL **: g_ascii_strcasecmp: assertion 's1 != NULL' failed
changed it to variable j
https://bugzilla.gnome.org/show_bug.cgi?id=753009
Skip keys from the fmtp, which we already use ourselves for the
caps. Some software is adding random things like clock-rate into
the fmtp, and we would otherwise here set a string-typed clock-rate
in the caps... and thus fail to create valid RTP caps
https://bugzilla.gnome.org/show_bug.cgi?id=753009
Don't hold the main splitmux part lock over
the parent state change function, as it prevents
posting error messages that happen. Since the purpose
is to prevent typefinding from proceeding, use a
separate mutex just for that.
Need to check that the number of bytes we want to copy from the adapter
actually is available and handle the error case gracefully. This error
may happen if malformed packets are received and we don't have a
complete frame.
https://bugzilla.gnome.org/show_bug.cgi?id=752663
The subtitle buffer we push out should not include a NUL terminator
as part of the data, we just add such a terminator for safety, but
it should not be included in the buffer size.
A NUL terminator is not valid UTF-8, so checks will fail if it's
included in the size, and the NUL will be replaced by the fallback
character specified when converting, i.e. '*'.
https://bugzilla.gnome.org/show_bug.cgi?id=752421
In certain applications, splitting into files named after a base
location template and an incremental sequence number is not enough.
This signal gives more fine-grained control to the application to
decide how to name the files.
https://bugzilla.gnome.org/show_bug.cgi?id=750106
For more optimised RTP packet handling: means we don't
need to map the input buffer again but can just re-use
the mapping the base class has already done.
https://bugzilla.gnome.org/show_bug.cgi?id=750235
For more optimised RTP packet handling: means we don't
need to map the input buffer again but can just re-use
the map the base class has already done.
https://bugzilla.gnome.org/show_bug.cgi?id=750235
Estimating it from the RTP time will give us the PTS, so in cases of PTS!=DTS
we would produce wrong DTS. As now the estimated DTS is based on the clock,
don't store it in the jitterbuffer items as it would otherwise be used in the
skew calculations and would influence the results. We only really need the DTS
for timer calculations.
https://bugzilla.gnome.org/show_bug.cgi?id=749536
When a new time segment is received upstream is going to restart
with a new atom. Make the neededbytes and todrop variables
reflect that to avoid waiting too much or dropping the
initial bytes that contain the header.
The adapter might have data remaining from the previous segment,
push it all before clearing the adapter and starting a new segment.
It can accumulate data if it had pushed and got not-linked, returning
immediately without processing all the data. Before starting a new
segment this data should be handled.
The amount of time that is completely expired and not worth waiting for,
is the duration of the packets in the gap (gap * duration) - the
latency (size) of the jitterbuffer (priv->latency_ns). This is the duration
that we make a "multi-lost" packet for.
The "late" concept made some sense in 0.10 as it reflected that a buffer
coming in had not been waited for at all, but had a timestamp that was
outside the jitterbuffer to wait for. With the rewrite of the waiting
(timeout) mechanism in 1.0, this no longer makes any sense, and the
variable no longer reflects anything meaningful (num > 0 is useless,
the duration is what matters)
Fixed up the tests that had been slightly modified in 1.0 to allow faulty
behavior to sneak in, and port some of them to use GstHarness.
https://bugzilla.gnome.org/show_bug.cgi?id=738363
This reverts commit 05bd708fc5.
The reverted patch is wrong and introduces a regression because there
may still be time to receive some of the packets included in the gap
if they are reordered.
Avoids accumulating all samples from a fragmented stream that could
lead to a 'index-too-big' error once it goes over 50MB of data. It
could reach that before 2h of playback so it doesn't take that long.
As upstream elements are providing data in time format they should
be the ones that have more information about the full media index
and should be able to seek if possible.
upstream_newsegment isn't really clear on what it means, it is set
to TRUE when the upstream element sends a segment in TIME format, so
rename it to be more clear about it.
It is important to know this because it means that upstream has
a notion of time and qtdemux is likely being driven by an upstream
element that is reading from a higher level abstraction than a file,
such as a DASH, MSS or DLNA element.
In fragmented streaming, multiple moov/moof will be parsed and their
previously stored samples array might leak when new values are parsed.
The parse_trak and callees won't free the previously stored values
before parsing the new ones.
In step-by-step, this is what happens:
1) initial moov is parsed, traks as well, streams are created. The
trak doesn't contain samples because they are in the moof's trun
boxes. n_samples is set to 0 while parsing the trak and the samples
array is still NULL.
2) moofs are parsed, and their trun boxes will increase n_samples and
create/extend the samples array
3) At some point a new moov might be sent (bitrate switching, for example)
and parsing the trak will overwrite n_samples with the values from
this trak. If the n_samples is set to 0 qtdemux will assume that
the samples array is NULL and will leak it when a new one is
created for the subsequent moofs.
This patch makes qtdemux properly free previous sample data before
creating new ones and adds an assert to catch future occurrences of
this issue when the code changes.
This reverts commit d46631c5c7.
pad only handle EOS events but not EOS flow, and will push the buffer again
resulting in an assertion error. So we should not handle the buffer
and return EOS flow.
goom_core.c: In function 'goom_update':
goom_core.c:685:5: error: 'param2' may be used uninitialized in this function [-Werror=maybe-uninitialized]
goom_lines_switch_to (goomInfo->gmline2, mode, param2, amplitude, couleur);
^
goom_core.c:684:5: error: 'param1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
goom_lines_switch_to (goomInfo->gmline1, mode, param1, amplitude, couleur);
^
https://bugzilla.gnome.org/show_bug.cgi?id=752053
endpos variable does not correctly understand in the
4.6.3 GCC version. So compile error appears when we do
compile rtph261pay using jhbuild.
This patch is fixed the compile error in 4.6.3 GCC version.
https://bugzilla.gnome.org/show_bug.cgi?id=751985
Draft 16 of "RTP Payload Format for VP8" states in section 4.2 that:
R: Bit reserved for future use. MUST be set to zero and MUST be
ignored by the receiver.
https://bugzilla.gnome.org/show_bug.cgi?id=751929
gstrtph261pay.c: In function 'gst_rtp_h261_pay_class_init':
gstrtph261pay.c:1003:17: error: variable 'gobject_class' set but not used [-Werror=unused-but-set-variable]
GObjectClass *gobject_class;
Implementation according to RFC 4587.
Payloader create fragments on MB boundaries in order to match MTU size
the best it can. Some decoders/depayloaders in the wild are very strict
about receiving a continuous bit-stream (e.g. no no-op bits between
frames), so the payloader will shift the compressed bit-stream of a
frame to align with the last significant bit of the previous frame.
Depayloader does not try to be fancy in case of packet loss. It simply
drops all packets for a frame if there is a loss, keeping it simple.
https://bugzilla.gnome.org/show_bug.cgi?id=751886
If we have a clock, update "now" now with the very latest running time we have.
If timers are unscheduled below we otherwise wouldn't update now (it's only updated
when timers expire), and also for the very first loop iteration now would otherwise
always be 0.
Also the time is used for the timeout functions, e.g. to calculate any times
for the next timeouts and we would otherwise pass too old times there.
https://bugzilla.gnome.org/show_bug.cgi?id=751636
We always pushed one buffer into the adapter, then handled exactly that one
buffer and flushed it from the adapter. Now also don't memcpy() the actual
payload but just attach the input buffer's data to the output buffer.
This code still needs some serious refactoring/rewriting.
This reverts commit 0c21cd7177.
If we have multiple immediate timers, we want to first handle the one with the
lowest sequence number... which would be broken now.
Instead of this we should just use a GSequence for the timers, and have them
sorted first by timestamp, and for equal timestamps by sequence number. Then
we would always only have to take the very first timer from the list and never
have to look at any others.
Most files don't contain the values for transposing the coordinates
back to the positive quadrant so qtdemux was ignoring the rotation
tag. To be able to properly handle those files qtdemux will also ignore
the transposing values to only detect the rotation using the values
abde from the transformation matrix:
[a b c]
[d e f]
[g h i]
https://bugzilla.gnome.org/show_bug.cgi?id=738681
The media start has nothing to do with the shift we have applied
but with the value of the first PTS. This is defined as:
Dt(0) = 0
Ct(0) = Dt(0) + CTTS(0)
So the media start is always the first CTTS.
https://bugzilla.gnome.org/show_bug.cgi?id=751361
Allows playing edts editted files with proper synchronization of
streams. This patch fixes the regression introduced by
bf95f93c01 that was added to fix
segment seeks handling.
Having the accumulated_base separated from the main segment.base
allows handling both segment seeks and edts editted files.
https://bugzilla.gnome.org/show_bug.cgi?id=751361
Buffers need not to start at running-time 0 so the last_dts needs
to be the value of the first buffer's dts as it is used to compute
the duration of the buffers. If it was left at 0 the first buffer
would have a larger duration when it shouldn't
https://bugzilla.gnome.org/show_bug.cgi?id=751361
Fix 2 startup races when things happen too quickly, and 1
at shutdown by holding a ref to the pads in use until the
loop functions exit.
Handle errors activating file parts and publish them on
the bus.
https://bugzilla.gnome.org/show_bug.cgi?id=750747
Sometimes, extra async-start/done from the internal sink
while the element is still starting up can cause splitmuxsink
to stall in PAUSED state when it has been set to PLAYING
by the app. Drop the child's async-start/done messages while
switching, so they don't cause state changes at the
splitmuxsink level.
https://bugzilla.gnome.org/show_bug.cgi?id=750747
Move the multiview caps calculations to the configure_stream()
function, so the rest of the video info is available, and
use the gst_video_multiview_guess_half_aspect() function to
determine if the half-aspect flag should be set on frame-packed
video.
The cslg atom provide information about the DTS shift. This is
needed in recent version of ctts atom where the offset can be
negative. When cslg is missing, we parse the CTTS table as proposed
in the spec to calculate these values.
In this implementation, we only need to know the shift. As GStreamer
cannot transport negative timestamps, we shift the timestamps forward
using that value and adapt the segment to compensate. This patch also
removes bogus offset of ctts_soffset, this offset shall be included
in the edit list.
https://bugzilla.gnome.org/show_bug.cgi?id=751103
We shift DTS forward to avoid negative timestamps which cannot be
represented with version 0 of the CTTS table. To stick with that
version (backward compatibility), the spec recommend using an
edit list entry to move back the presentation time to where it
should be.
https://bugzilla.gnome.org/show_bug.cgi?id=751242
No need to check for context availability while freeing. We are inside
inside a code block with a condition that dereferences context.
if (context->type == 0 ...
https://bugzilla.gnome.org/show_bug.cgi?id=751306
If update_receiver_stats() fails, we can't really do anything with this buffer
anymore and have to drop it. This happens if there's a big seqnum
discontinuity for example.
https://bugzilla.gnome.org/show_bug.cgi?id=751311
The new property allows to select the time source that should be used for the
NTP time in RTCP packets. By default it will continue to calculate the NTP
timestamp (1900 epoch) based on the realtime clock. Alternatively it can use
the UNIX timestamp (1970 epoch), the pipeline's running time or the pipeline's
clock time. The latter is especially useful for synchronizing multiple
receivers if all of them share the same clock.
If use-pipeline-clock is set to TRUE, it will override the ntp-time-source
setting and continue to use the running time plus 70 years. This is only kept
for backwards compatibility.
In presence of a CTTS, the segment start/stop must be offset so
the segment start/stop include the PTS. This is needed since the
PTS cannot be negative in this format. This fixes issues where the
running time of the first buffer isn't at the start.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
This is done by using new feature of the CollectPad clip function
which sets the DTS as a gint64 in the collected data. It also simplify
the code a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
When deciding whether it's time to switch to a new file, take into
account data that's been released for pushing, but hasn't yet
been pushed - because downstream is slow or the threads haven't been
scheduled.
Fixes a race in the unit test and probably in practice - sometimes
failing to switch when it should for an extra GOP or two.
Also fix a problem in splitmuxsrc where playback sometimes
stalls at startup if types are found too quickly.
https://bugzilla.gnome.org/show_bug.cgi?id=750747
Remove a custom specialized version of gst_buffer_new_wrapped by
using gst_buffer_new_wrapped_full inside a macro to simplify
parameters and give it a more meaningful name.
It is only used to create temporary buffers to have its data copied.
Adds AC-3 muxing support. It is defined for mp4 and 3gp formats.
One extra feature that was added was the ability to add extension
atoms after set_caps as the AC-3 extension atom needs some data
that has to be extracted from the stream itself and is not
present on caps.
Implement support for the packed video formats WebM
uses, not all the values that Matroska might use.
In practice, it's really hard to find any samples in the
wild of any.
Supported in both the muxer and demuxer.
The MPEG-A format provides an extension to the ISO base media
file format to store stereoscopic content encoded with different
codecs like H.264 and MPEG-4:2. The stereo video media information(svmi)
atom declares the presence and storage method for the video.
Stereo video information for MPEG-A can also be supplied through
the 'stvi' atom (ref: ISO/IEC_14496-12, ISO/IEC_23000-11), which
is not implemented in this patch.
Also missing is support for stereo video encoded as separate video tracks
for now.
Based on a patch by Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=611157
When performing seek, segment->start is being updated with desired_offset,
but in case of reverse playback segment->start should be 0 and
segment->stop should be updated with desired offset.
https://bugzilla.gnome.org/show_bug.cgi?id=750675
Build fails with the latest snapshot of gcc-4.9 because param1 and param2 might
possibly be used uninitialized. They are set depending on the cases of a switch
statement and the compiler sees this as not a complete guarantee.
Set them to 0 if the switch statement falls down to the default case.
https://bugzilla.gnome.org/show_bug.cgi?id=750566#c6
Compiling (with gcc-4.9-20150603) produces an error because of an access beyond
the end of an array. This patch fixes the error by initializing the loop
control/array index variable (i) to 1 and returning i - 1 when a match is found.
Also, because the values stored in the array increase in value as the index
increases, the >= test unnecessary, so it is removed.
Only update the moov header into the caps if it's the finalised
moov at EOS time. Avoids posting a bogus moov at startup and
repeated updates in robust-recording mode
Implement a robust recording mode, where the output
file is always in a playable state, seeking and rewriting
the moov header at a configurable interval. Rewriting
moov is done using reserved space at the start of
the file, and a ping-pong strategy where the moov
is replaced atomically so it's never invalid.
Track when tags have actually changed, and don't write them into
the moov unless they've changed. Clear any existing tags when
re-writing them, so we can do progressive moov updating in robust
recording mode.
Write placeholder mdat as a free atom plus a 32-bit mdat
with '0' size, which means "rest of the file" in the spec.
Re-write it later to a full 64-bit extended size atom if needed.
Correctly update any edit lists each time the moov is recalculated,
updating existing table entries if they already exist instead of just
adding new ones.
self->channels is being incremented only when
channel-positions-from-input is set as TRUE. So in case of FALSE
self->func is not set and hence creating assertion error.
Hence removing the condition to increment self->channels.
https://bugzilla.gnome.org/show_bug.cgi?id=744211
According to RFC 5506, reduce size packages can be sent, this
packages may not be compound, so we need to add support for
getting ssrc from other types of packages.
https://bugzilla.gnome.org/show_bug.cgi?id=750327
This depayloader clash with the standard one for H263p. It produces an
H263p stream with a modified header. It uses encoding-name that is the
same as H263p (H263-1998) though the resulting ES is not decodable or
parsable in GStreamer, making it unsuable in dynamic pipeline. This
patch unrank this specialized depayloader since it can only be used in
custom pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=739935
Otherwise we will have 10s-100s of thread wakeups in feedback profiles, create
RTCP packets, etc. just to suppress them in 99% of the cases (i.e. if no
feedback is actually pending and no regular RTCP has to be sent).
This improves CPU usage and battery life quite a lot.
https://bugzilla.gnome.org/show_bug.cgi?id=746543
If we may suppress the packet due to the rules of RFC4585 (i.e. when
below the t-rr-int), we can send a smaller RTCP packet without RRs
and full SDES. In theory we could even send a minimal RTCP packet
according to RFC5506, but we don't support that yet.
https://bugzilla.gnome.org/show_bug.cgi?id=746543
Otherwise we can't properly schedule RTCP in feedback profiles as we need to
distinguish the time when we last checked for sending RTCP (tp) but might have
suppressed it, and the time when we last actually sent a non-early RTCP
packet.
This together with the other changes should now properly implement RTCP
scheduling according to RFC4585, and especially allow us to send feedback
packets a lot if needed but only send regular RTCP packets every once in a
while.
https://bugzilla.gnome.org/show_bug.cgi?id=746543
And modify our RTCP scheduling algorithm accordingly. We now can send more
RTCP packets if needed for feedback, but will throttle full RTCP packets by
rtcp-min-interval (t-rr-int from RFC4585).
In non-feedback mode, rtcp-min-interval is Tmin from RFC3550, which is
statically set to 1s or 0s by RFC4585. Tmin defines how often we should
send RTCP packets at most.
https://bugzilla.gnome.org/show_bug.cgi?id=746543
Otherwise we constantly create/close event file descriptors,
every time we call g_socket_condition_timed_wait() or
g_socket_send_message(s)(), i.e. a lot. Which is not
particularly good for performance.
Can't create GCancellable in ::start() here because it's used
in client_new() which may be called via the add-client action
signal which may be called before the element is up and running.
Otherwise we constantly create/close event file descriptors,
every single time we call g_socket_condition_timed_wait() or
g_socket_receive_message(), i.e. twice per packet received!
This was not particularly good for performance.
Also only create GCancellable on start-up.
qtdemux creates a samples array and gets the timestamps for buffers by
accumulating their durations. When doing reverse playback of fragments,
accumulating samples will lead to wrong timestamps as the timestamps
should go decreasing from fragment to fragment and the accumulation
will produce wrong results.
In this case, when receiving a discont for fragmented reverse playback,
the previous samples information should be flushed before new data
is processed.
This new mode ensures that files will never exceed a certain duration
based on incoming buffer PTS (and duration if present)
Note:
* You need timestamped buffers (duh). If some of the incoming buffers don't
have PTS, then it will just accept them in the current file
This property can be used in combination with next-file=max-size
(and perhaps a future next-file=max-duration) to make sure that
each file part starts cleanly with a key frame and the appropriate headers.
In order for this property to work correctly, upstream elements should make
sure than any headers that need to be written in a standalone file are:
1) in the streamheader caps field
2) and/or in the stream as one or more buffers marked with GST_BUFFER_FLAG_HEADER
that are just before the keyframe buffer
This is useful for MPEG-TS/MPEG-PS file segmenting in
combination with mpegtsmux or mpegpsmux.
Original patch by: Tim-Philipp Müller <tim@centricular.com>
From the API documentation: "Note that it is generally not
a good idea to reuse an existing cancellable for more
operations after it has been cancelled once, as this
function might tempt you to do. The recommended practice
is to drop the reference to a cancellable after cancelling
it, and let it die with the outstanding async operations.
You should create a fresh cancellable for further async
operations."
https://bugzilla.gnome.org/show_bug.cgi?id=739132
It might just be a late retransmission or spurious packet from elsewhere, but
resetting everything would mean that we will cause a noticeable hickup. Let's
get some confidence first that the sequence numbers changed for whatever
reason.
https://bugzilla.gnome.org/show_bug.cgi?id=747922
The gst-launch script for example launch line to test qtdemux is
missing a queue before the decodebins, otherwise the gst-launch-1.0
command won't work.
https://bugzilla.gnome.org/show_bug.cgi?id=749054
This reverts commit d22ec49632.
Application code might expect that it only gets external sources on those
signals, and get confused by this. If anything we would need to add new
signals.
Without this it seems impossible for an application to easily get notified
about the internal ssrcs that are created, e.g. sender sources, and also
to know when they are active and produce RTCP packets.
https://bugzilla.gnome.org/show_bug.cgi?id=746747
We now take the maximum of 2*jitter and 0.5*packet_spacing for the extra
delay. If jitter is very low, this should prevent unnecessary retransmission
requests to some degree.
https://bugzilla.gnome.org/show_bug.cgi?id=748041
When we are in passthrough, the transform function doesn't run and if the
passthrough check is in this function it will never be deactivated. Fix this by
checking directly whenever a gain is changed.
Also set the passthrough to TRUE at init because the gains default to 0, so we
can passthrough until any gain property is changed.
https://bugzilla.gnome.org/show_bug.cgi?id=748068
Prevents an extra unref of GstBuffer when passing a non-icy stream through
icydemux with metadata-interval set to 0.
Reproducible with:
gst-launch-1.0 filesrc location=~/testsong.mp3 ! \
'application/x-icy,metadata-interval=(int)0' ! icydemux ! decodebin ! wavenc ! \
filesink location=~/testsong.wav
https://bugzilla.gnome.org/show_bug.cgi?id=748024
because _release_pad tries to release it from ctx->sinkpad, which is
multiqueue's sink pad, and currently fails because the probe is not
installed there
This also happens in the very beginning when we receive the first packet, a
warning would be very confusing here. In all places where we should warn about
this, we would've printed a warning already before.
Right above we consider lost_packet packets, each of them having duration,
as lost and triggered their timers immediately. Below we use expected_dts
to schedule retransmission or schedule lost timers for the packets that
come after expected_dts.
As we just triggered lost_packets packets as lost, there's no point in
scheduling new timers for them and we can just skip over all lost packets.
https://bugzilla.gnome.org/show_bug.cgi?id=739868
Resetting the jitterbuffer drops all packets and other things, and will cause
a discontinuity in the packets received by the depayloaders. They should now
also flush anything they had pending as the new data will start at a different
position.
https://bugzilla.gnome.org/show_bug.cgi?id=739868
When doing key uint seek, qtdemux calls gst_qtdemux_adjust_seek
to get proper offset. And then this offset is set to
segment.position and segment.time in gst_qtdemux_perform_seek but
segment.start is not updated.
After that, application sends segment query,
qtdemux sets start and stop to query using gst_segment_to_stream_time. Due
to the wrong value in segment.start, the stop position is smaller than
it should.
https://bugzilla.gnome.org/show_bug.cgi?id=746822
We always write the CTTS in qtmux. Ideally we only want to do that
for streams that need DTS, it should be present on the track information
rather than be decided based on each buffer
As qt uses durations, it doesn't matter, only the difference
between consecutive buffers is important. Also, collectpads
already replaces PTS/DTS with the running times for them.
Instead of checking various state variables around the muxer,
track the current muxing mode in a single 'mux_mode' enum.
Add some implementation notes about the different mux modes
gst_segment_do_seek() does that for us already, and doing it twice
will break non-flushing seeks in interesting ways. Leftover from 1.0
porting.
Also copy over segment offset and applied_rate, just in case.
When multifilesink is operating in any mode other than one file
per buffer, the last file created won't have a file message posted
as multifilesink doesn't handle the EOS event.
This patch fixes it by using the last position to post a file
message when EOS is received. This should ensure at least the
time related data and the filename are posted to the application
or other elements
https://bugzilla.gnome.org/show_bug.cgi?id=747000
When not in fast-start or fragmented mode, we need to be able
to rewrite the size of the mdat atom, or else the output just
won't be playable - the mdat placeholder with size == 0 will
cover the rest of the file, including any moov atom we write out.
https://bugzilla.gnome.org/show_bug.cgi?id=708808
New tags can be found on different parts of the file, so this patch
keeps the stream taglists around for the life cycle of the pad
and adds those new tags as found. Then a new tag is found, the
pad's is marked with a tags changed flag, making the element push
a new tag event on the next check. Before this, we were sending
only the newly found tags, as the element was losing its taglist
when pushing the event.
Global tags are already being read in matroskaparse, but they are not
currently being sent.
This patch makes global tags get sent incrementally whenever new ones
are found.
https://bugzilla.gnome.org/show_bug.cgi?id=746242
When planes property is set to 0, the pipeline executes in
an infinite loop and never exits. Since planes must never
be 0, set the minimum value in the property description
to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=743906
It is expected that buffers are time-stamped with running time. Set
a segment accordingly. In this case we pick 0,-1 as this is what udpsrc
would do. Depayloaders will update the segment to reflect the playback
position.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
The segment start/stop in the query is meant to represent the seekable
portion of the stream. It does not match the segment start/stop. Instead
export 0 to duration.
Previously we were setting new caps with the same content for every H264 or
AAC codec_data we found in the stream, spamming everything and causing
renegotiations.
Instead delay creating the caps until we read the codec_data from the stream,
or fail if we get normal data before the codec_data.
AAC raw caps and H264 avc caps always need codec_data, setting caps on the pad
without them is going to make negotiation fail most of the time. Even if we
later set new caps with the codec_data, that's usually going to be too late.
https://bugzilla.gnome.org/show_bug.cgi?id=746682
Make sure that the sync_src pad has caps before the segment event.
Otherwise we might get a segment event before caps from the receive
RTCP pad, and then later when receiving RTCP packets will set caps.
This will results in a sticky event misordering warning
This fixes warnings in the rtpaux unit test but also in the
rtpaux and rtx examples in tests/examples/rtp
https://bugzilla.gnome.org/show_bug.cgi?id=746445
Before we only started it when either:
- there is no send RTP stream
or
- we received an RTP packet for sending
This could mean that if the send RTP pads are connected but never receive any
RTP data, and the same session is also used for receiving RTP/RTCP, we would
never start the RTCP thread and would never send RTCP for the receiving part
of the session.
This can be reproduced with a pipeline like:
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc port=5000 ! "application/x-rtp, media=video, clock-rate=90000, encoding-name=H264" ! rtpbin.recv_rtp_sink_0 \
udpsrc port=5001 ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 ! fakesink name=rtcp_fakesink silent=false async=false sync=false \
rtpbin.recv_rtp_src_0_2553225531_96 ! decodebin ! xvimagesink \
fakesrc ! valve drop=true ! rtpbin.send_rtp_sink_0 \
rtpbin.send_rtp_src_0 ! fakesink name=rtp_fakesink silent=false async=false sync=false -v
Before this change the rtcp_fakesink would never send RTCP for the receiving
part of the session (i.e. no receiver reports!), after the change it does.
And before and after this change it would send RTCP for the receiving part of
the session if the sender part was omitted (the last two lines).
* Fix critical when new tags are found after segment event has already
been sent.
* Send global tags before stream tags.
* Split sending of tags out of gst_matroska_demux_send_event() into its
own function.
https://bugzilla.gnome.org/show_bug.cgi?id=745973
Previously we advanced the in_data pointer by bps for every channel, and then
later again for block_size*bps. This caused us to be one sample further than
expected if an input buffer covered two analysis frames. And in the end lead
to completely bogus values reported by level.
https://bugzilla.gnome.org/show_bug.cgi?id=746065
These are outside the expected range of sequence numbers and should be
clipped, especially for RTSP they might belong to packets from before a seek
or a previous stream in general.
We need to set up the transport in any case, not just if we have a container
stream or a non-interleaved stream. Only if we have an interleaved stream and
are retrying, we should not set up the stream again.
https://bugzilla.gnome.org/show_bug.cgi?id=745599
Otherwise we will get not-negotiated later from rtpbin, and will never be able
to send RTCP packets back to the server. Note that error flow returns from the
RTCP pads are ignored, that's why it didn't fail more visible before.
This reverts commit 1591adf4cd.
https://bugzilla.gnome.org/show_bug.cgi?id=745586#c1:
It's the beginning of an implementation of RFC 2762, which is needed for
large multicast groups. The implementation is not yet complete but why
not leave what is there and implement RFC 2762 instead?
rtpsession declares an array of maps to store srrcs but only the
the key 0 is being used. This patch replaces the array of maps
for just one map and remove useless parameters in rtpsession
https://bugzilla.gnome.org/show_bug.cgi?id=745586
In gst_avi_demux_handle_src_query, there is not needed code.
We already check about stream is vbr or not at the upper line.
o, we don't need to check this condition becase stream is not
vbr 100% in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=745276
Unlike many other seek flags, the KEY_UNIT seek
flag is not copied over into the GstSegment,
since it's only relevant for the seek itself,
so we need to pass it explicitly to the seek
handler here.
https://bugzilla.gnome.org/show_bug.cgi?id=745339
We need different symbol names, because these symbols are also present
in the fragmented plugin ... which will cause conflicts when doing
static linking
The number of FFTs is calculated with the following formula:
guint nfft = 2 * bands - 2;
nfft is passed to gst_fft_f32_new() as the len argument and is of type
unsigned integer. This method required that len is at leas 1, then
maximum G_MAXINT, as other values would be negative. If we extrapolate
from the formula above it means we need "bands" to be between 2 and
((guint)G_MAXINT + 2) / 2).
https://bugzilla.gnome.org/show_bug.cgi?id=744213
Using the sparse streams can make the push-based seeking return
too far in the stream. It also can lead to issues as the
sparse streams will be ignored when restarting playback and,
if the sparse stream is the one that has the earliest sample,
it will confuse qtdemux's offsets as one stream will have
an earlier offset than the demuxer's one which might lead to
early EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=742661
Parse the 'sidx' atom and update the total duration according to the
parser result. The isoff parser code is imported from
gst-plugins-bad's dashdemux and a gst_isoff_sidx_parser_add_data()
function was factored out of the gst_isoff_sidx_parser_add_buffer()
function.
https://bugzilla.gnome.org/show_bug.cgi?id=743578
According to RFC 4585 section 3.5.3 step 1 we are not allowed to send
an early RTCP packet for the very first one. It must be a regular one.
Also make sure to not use last_rtcp_send_time in any calculations until
we actually sent an RTCP packet already. In specific this means that we
must not use it for forward reconsideration of the current RTCP send time.
Instead we don't do any forward reconsideration for the first RTCP packet.
Assignment is done to variable segment.stop when the intention was to assign to
local variable stop. Instead of overwriting it, the value is now clamped and
segment.stop is set to it soon after.
CID #1265773
Handle the case where a short file reaches EOS while we're still
waiting for no-more-pads, and make sure we continue to the internal
READY state for real playback to work properly later.
Implement 2 new elements - splitmuxsink and splitmuxsrc.
splitmuxsink is a bin which wraps a muxer and takes 1 video stream,
plus audio/subtitle streams, and starts a new file
whenever necessary to avoid overrunning a threshold of either bytes
or time. New files are started at a keyframe, and corresponding audio
and subtitle streams are split at packet boundaries to match
video GOP timestamps.
splitmuxsrc is a corresponding source element which handles
the splitmux:// URL and plays back all component files,
reconstructing the original elementary streams as it goes.
We detect a container correctly now so we need to revert the weird
check there was before.
Use gst_rtspsrc_stream_push_event() to push the caps event on the
right pad.
See https://bugzilla.gnome.org/show_bug.cgi?id=739391
Keep global and stream tags separately and parse the udta node
that can be found under the trak atom. The udta will contain
stream specific tags and will be pushed as such
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Tags received via events, when marked as stream tags, will
be stored on that stream's trak atom instead of being stored
in the main tags atom. This allows the resulting file to have
global and stream tags stored.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Refactor the functions that were bound to the 'moov' atom to
directly pass the desired 'udta' that should receive the tags.
This allows the tags to be written to 'udta' at the 'moov' or
the 'trak' level, creating tags that are for the container or
for a stream only.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Snap to the end of the file when seeking past the end in reverse mode,
and also fix GST_SEEK_TYPE_END and GST_SEEK_TYPE_NONE handling
for the stop position by always seeking on a segment in stream time
This will be emitted whenever an RTCP packet is received. Different to
on-feedback-rtcp, this signal gets every complete RTCP packet and not
just the individual feedback packets.
For fragmented streams with extra data at the end of the mdat
qtdemux was not dropping those bytes and would try to use
that extra data as the beginning of a new atom, causing the
stream to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=743407
It had no effect since quite some time and also is not needed in general,
especially not to switch between immediate feedback mode and early feedback
mode. The latest understanding of the RFC is that from the endpoint point of
view, both modes are exactly the same. RTCP is only allowed to use the
bandwidth as given by the RFC constraints, as such it is only ever possible
to schedule a RTCP packet early but it's against the RFC to schedule more RTCP
packets.
The difference between immediate feedback mode and early feedback mode is that
the former guarantees that an RTCP packet can be sent for every event
"immediately", which means that the bandwidth calculations from the RFC have
resulted in an RTCP scheduling interval that is small enough. Early feedback
mode on the other hand means that we can schedule some packets early to make
that happen, but it's not guaranteed at all that it's possible to schedule
an RTCP packet per event (i.e. they need to be accumulated or dropped).
This indicates with a boolean return value if scheduling a new RTCP packet
within the requested delay was possible. Otherwise it behaves exactly like
send-rtcp. The only reason for adding a new signal is ABI compatibility.
No matter if gst_matroska_read_common_parse_index_cuetrack () returns that the
flow is OK or not, the check there will be a break from the switch. Removing the
check since the outcome is the same.
CID #1265762
Bringing back the check removed in the previous commit but have that check be a
g_assert. Changing the function to static void since return can never be False,
because audio format will never be unkown.
func_index is set by the sum of three ternary operators which add, 0:4, 0:2,
and 1:0. Minimum value would be 0+0+0=0, and maximum would be 4+2+1=7.
The conditional checking if func_index is >= 0 and < 8 will always be true.
Removing it.
CID 1226442
We (currently?) can't really handle gaps between RTP packets if they're not
properly timestamped. The current code would go into calculations with
GST_CLOCK_TIME_NONE and then cause assertions everywhere. It's probably
better to error out cleanly instead.
We set to PLAYING after we have configured the caps, otherwise we
might end up calling request_key (with SRTP) while caps are still
being configured, ending in a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=740505
Actually copy the codec data instead of copying nothing
and then bombing out because there's no data.
Fixes: gst-launch-1.0 audiotestsrc ! avenc_alac ! qtmux ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=741783
Apparently linphone sends an invalid RTP packet as very
first packet. We want to ignore that instead of erroring
out (same for any other invalid packets really).
https://bugzilla.gnome.org/show_bug.cgi?id=741398
Instead of constantly querying upstream, just cache the last duration,
and in the unlikelyness we might have gone over query again before
deciding we are EOS.
Cut 15% cpu off matroskademux streaming thread (srsly...)
This is meant to be so (https://wiki.xiph.org/MatroskaOpus - while
it is marked as a draft, this part was confirmed to be correct on
IRC), and allows one to determine whether a demuxed stream is
multistream or not, and thus set the multistream caps field
accordingly. In turn, this means downstream does not have to guess.
https://bugzilla.gnome.org/show_bug.cgi?id=740744
It's like rendering a buffer list, just with one buffer.
Has the added advantage that if there are multiple clients
we can send the buffer to all the clients in one go.
We unlock and re-lock the client lock while emitting the
removed signal, which causes inconsistencies in the client
list vs. the client counts. Instead, remove the client from
the list already before emitting the signal and put it into
a temporary list of clients to be removed. That way things
look consistent to the streaming thread, but signal callbacks
can still do things like get stats from removed clients.
Add prototype for a render_list() function that can use a
sendmmsg-style g_socket_send_messages() function once it lands
in GLib. We can use this infrastructure to send multiple buffers
made up by multiple memories to multiple clients in one go, which
drastically reduces the number of syscalls made when sending
high-bitrate video streams.
https://bugzilla.gnome.org/show_bug.cgi?id=732152
Use the refcount for memory management and keep track
of the number of duplicate clients in a separate
variable. This will be useful later, and means we
don't have to hold the OBJECT_LOCK all the time.
https://bugzilla.gnome.org/show_bug.cgi?id=732866
Since "basetransform: Fix caps equality check" commit a7f357,
set_info() will not be called anymore if crop didn't change
the caps. This is fixed by setting "need_update" boolean when
cropping properties has been changed, and then applying these
if they where not applied before rendering the next frame. This
patch also fixed the locking, dropping un-needed custom lock,
and no holding needless lock while doing the operation as we
already hold the streaming lock.
https://bugzilla.gnome.org/show_bug.cgi?id=740787
In some cases the currently set GstVideoInfo is not interlaced, but
upstream caps are interlaced and the info is passed in the filter,
we should take that info into account and make sure that we do not
consider that case as a "pass through" case.
https://bugzilla.gnome.org/show_bug.cgi?id=741407
A race condition in the state change function may cause buffers
to be unreffed while they are still used by the streaming thread
in gst_rtp_h264_pay_send_sps_pps() resulting in a crash. Chain
up to the parent class first in the state change function to
make sure streaming has stopped and only then free those buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=741381
When dealing with fragmented files, we will get more accurate duration
information via the mfra and moof atoms.
In order for playback to not stop at the initial duration (from the
moov atom), we need to check and update the various duration variables
when we find more information.
Fixes playback of fragmented files in pull mode
Adds a new set of properties to make pushfilesrc output a TIME SEGMENT
(instead of the filesrc BYTE SEGMENT).
When time-segment is set to True the following will happen:
* Seeks are refused (data starts from the beginning of the file)
* The BYTE segment will be replaced by a TIME segment with the values
specified in the various properties
* The first outgoing buffer will have a timestamp set on it (by default
it has a value of GST_CLOCK_TIME_NONE)
When seeking or finding the previous keyframe, do
comparisons against targets and segments using composition time
to correctly decide which sample times match.
We used to setup an iterator with 1 GValue set with a NULL object
pointer which is not the normal way to do that. Instead we should make
sure that the first call to gst_iterator_next returns GST_ITERATOR_DONE.
Currently during header parsing, we scan through the entire file
and skip every moof+mdat chunk for fragmented mp4s, which makes
start-up incredibly slow. Instead, just stop at the first moof
chunk when have a moov, and start exposing the streams, so we
can go and start handling the moofs for real.
When an caps-event is received, we must immediately change the crop
to videocrop correctly changed caps-event dimension, otherwise the
videocrop will first use the previous value of the crop that when
resizing video to a smaller resolution may cause an error.
https://bugzilla.gnome.org/show_bug.cgi?id=740671
Empty segments in an edit list have a media_start time of -1,
as they don't actually play any media. Allow for that when
aligning to the reference stream in reverse play.
Put a 0-byte at the end of the event string. Does not break ABI because
old depayloaders will skip the 0 byte (which is included in the length).
Expect a 0-byte at the end of the event string or a ; for old
payloaders.
See https://bugzilla.gnome.org/show_bug.cgi?id=737591
Both Firefox and Chrome uses VP8 as the encoding in their SDP.
Adding this now defacto standard name removes the need for special
case in SDP parsing code.
https://bugzilla.gnome.org/show_bug.cgi?id=737810
Add fixed payload type for mp2t to template caps as well, so
our output caps match the advertised default pt. Fixes a
regression from 1.2.
There's still something wrong with caps negotiation though,
rtpmp2tpay payload=96 ! fakesink will not output caps with
payload=96.
Fixes crash in audiotestsrc because of an unsupported format
getting negotiated on big-endian systems with
audiotestsrc ! interleave ! audioconvert ! wavenc
When the RTT and jitter are very low (such as on a local network), the
calculated retransmission timeout is very small. Set some sensible lower
boundary to the timeout by adding a new property. We use the packet
spacing as a lower boundary by default.
In early retransmission we are allowed to schedule 1 regular RTCP packet
at an earlier time. When we do that, we need to set allow_early to FALSE
and ignore/drop (or merge) all future requests for early transmission.
We now first check if we can schedule an early RTCP and if we can,
actually prepare the data for the next RTCP interval.
After we send the next regular RTCP after the early RTCP, we set
allow_early to TRUE again to allow more early requests.
Remove the condition for the immediate feedback for now.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=738319
Add a need-resync state, this is when we need to try to lock on to a
time/RTPtime pair.
Always check the RTP timestamps and if they go backwards, mark ourselves
as need-resync.
Only resync when need-resync is TRUE and we have a valid time. Otherwise
we keep the old values. This avoids locking on to an invalid time and
causing us to timestamp everything with -1.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=730417
rtpmux behaves like a funnel in that it forwards whatever upstream is
sending buffers. So setting proxy caps doesn't make sense as the
upstream don't have to have compatible caps, thus resulting in an empty
caps set as a result of a caps query. Instead set fixed caps just
as funnel does.
https://bugzilla.gnome.org/show_bug.cgi?id=738722
left, right, top, bottom can be set from range of -2147483648 to 2147483647
when i launch the videobox element with that values, it gives a critical error
(gst-check-1.0:29869): GStreamer-CRITICAL **: gst_value_set_int_range_step: assertion 'start < end' failed
This happens because min cannot be equal to max.
https://bugzilla.gnome.org/show_bug.cgi?id=738838
The loop in zoomFilterSetResolution is meant to change the values in the
zf->firedec[] array. Each iteration writes the value of decc onto the arrya,
but no conditions that change the value of decc are ever met and the array is
filled with zero for each element. Which is the initial state of the
array before the loop begins.
The loop does nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=728353
We never initialize clock_rate explicitly, therefore it is 0 by default. The
parameter is a uint32 and the only caller ensure that it is >0, therefore it
won't become -1 ever.
In order to have a full mapping between channel positions in the audio
stream and loudspeaker positions, the channel-mask alone is not enough:
the channels must be interleaved following some Default Channel Ordering
as mentioned in the WAVEFORMATEXTENSIBLE[1] specification.
As a Default Channel Ordering use the one implied by
GstAudioChannelPosition which follows the ordering defined in SMPTE
2036-2-2008[2].
NOTE that the relative order in the Top Layer is not exactly the same as
the one from the WAVEFORMATEXTENSIBLE[1] specification; let's hope users
using so may channels are already aware of such discrepancies.
[1] http://msdn.microsoft.com/en-us/library/windows/hardware/dn653308%28v=vs.85%29.aspx
[2] http://www.itu.int/dms_pub/itu-r/opb/rep/R-REP-BS.2159-2-2011-PDF-E.pdf
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=737127
Otherwise the CAPS event will be dropped and we never configure any caps at
all, leading to weird behaviour in many situations. Especially header
rewriting is not going to work if a capsfilter is after wavenc.
https://bugzilla.gnome.org/show_bug.cgi?id=737735
This is about converting the format, not about converting any widths and
heights. Subclasses are expected to handler different resolutions themselves,
like the videomixers already do properly.
gstrtspsrc.c:7939:11: error: implicit conversion from enumeration type 'GstSDPResult' to different enumeration type
'GstRTSPResult' [-Werror,-Wenum-conversion]
res = gst_sdp_message_new (&sdp);
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
gstrtspsrc.c:7944:11: error: implicit conversion from enumeration type 'GstSDPResult' to different enumeration type
'GstRTSPResult' [-Werror,-Wenum-conversion]
res = gst_sdp_message_parse_uri (uri, sdp);
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove pads from flow combiner and reset last
flow return to FLOW_OK by resetting the flow combiner.
This prevents FLOW_FLUSHING when trying to re-use the
demuxer after setting it back to NULL/READY state.
https://bugzilla.gnome.org/show_bug.cgi?id=737359
DTS delta is used to calculate sample duration. If buffer has missing DTS, we take either segment start or previous buffer end time, whichever is later.
This must only be done for non sparse streams, sparse streams can have gaps between buffers (which is handled later by adding extra empty buffer with duration that fills the gap)
https://bugzilla.gnome.org/show_bug.cgi?id=737095
In 1.0, we pass the complete caps to transform_caps to allow for better
optimizations. Make this function actually work on non-simple caps
instead of just ignoring the configured filter caps.
We have to skip 12 bytes of data for the chunk, and the data size
passed to the sub-chunk parsing functions should have 4 bytes less
than the data size.
Also when parsing the sub-chunks, check if we actually have enough
data to read instead of just crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=736266
Drop use of g_socket_get_available_bytes() which is
not useful on all systems (where it returns the size
of the entire buffer not that of the next pending
packet), and is yet another syscall and apparently
very inefficient on Windows in the UDP case.
Instead, when reading UDP packets, use the more featureful
g_socket_receive_message() call that allows to read into
scattered memory, and allocate one memory chunk which is
likely to be large enough for a packet, while also providing
a larger allocated memory chunk just in case the packet
is larger than expected. If the received data fits into the
first chunk, we'll just add that to the buffer we return
and re-use the fallback buffer for next time, otherwise we
add both chunks to the buffer.
This reduces memory waste more reliably on systems where
get_available_bytes() doesn't work properly.
In a multimedia streaming scenario, incoming UDP packets
are almost never fragmented and thus almost always smaller
than the MTU size, which is also why we don't try to do
something smarter with more fallback memory chunks of
different sizes. The fallback scenario is just for when
someone built a broken sender pipeline (not using a
payloader or somesuch)
https://bugzilla.gnome.org/show_bug.cgi?id=610364
This makes sure that also properties like the pixel-aspect-ratio are the same
between both streams and that the output caps contain all fields necessary for
complete video caps.
https://bugzilla.gnome.org/show_bug.cgi?id=735804
gst_buffer_ref and gst_buffer_writable is being used to create a writable copy of source buffer.
replacing the same with gst_buffer_copy as the functionality is same.
https://bugzilla.gnome.org/show_bug.cgi?id=735880
Adding an extra condition while calling gst_caps_unref (templ)
and replacing gst_caps_make_writable (gst_caps_ref (caps)) with
gst_caps_copy (caps) in line 177, since the functionality is same.
https://bugzilla.gnome.org/show_bug.cgi?id=735795
We return EOS after the first buffer, and GstPad will make sure now that we
won't get any other buffer afterwards until a flush happens. No need to check
for it ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=735581
FLV documentation stipulates that timestamp must start at zero.
In order to respect this rule, keep the first timestamp around
and offset the timestamp from this value. This allow for longer
recording time in presence of timestamp that does not start
at 0 already.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
The tags in FLV are DTS. In audio cases, and for many video format this makes
no difference, but for AVC with B-Frames, PTS need to be computed from
composition timestamp CTS, with PTS = DTS + CTS.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
The jitterbuffer shouldn't force clock-rate on its sink pad, this will cause a negotiation issue since rtpssrcdemux doesn't have the clock-rate and doesn't add it to the caps. The documentation states that the clock-rate can either be specified through the caps or through the request-pt-map signal, so we must remove clock-rate from the pad templates and we must accept the GST_EVENT_CAPS if the caps don't have the clock-rate.
https://bugzilla.gnome.org/show_bug.cgi?id=734322
udpsrc gtk-doc documentation refers to sockfd and closefd properties which has
been removed. This patch replaces those references to socket and close-socket
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=734987
The old default timescale of 1 millisecond produces irrational
numbers for a lot of framerate/audio-packet-duration multiples.
1/1800 is a nicer number, as it tends to produce better fractions
and therefore slightly higher accuracy overall
Change the way the output framerate is calculated
to ignore the first sample (which is sometimes truncated
in my testing) and use the new gst_video_guess_framerate()
function to recognise common standard framerates better.
Remove the code that was sorting the first 20 sample
durations and then ignoring the result.
Commit 2b9493b5 broke this in two ways: a) we should only
pass duration queries in TIME format upstream (or at least
not those in DEFAULT or BYTE format), and b) we mustn't
overwrite the default value of 'res' from TRUE to FALSE
and not set it again later. This led to bogus durations
being reported for FLV playback from file, because TIME
queries would fail (as 'res' had been set to FALSE) and
parsers then do a BYTE query as fallback and try to
guesstimate something in return, which of course goes
horribly wrong since the BYTE size returned is for the
muxed file.
When changing the properties to not be in passthrough mode anymore,
we will only accept caps we can process ourselves, potentially causing
a not-negotiated error.
https://bugzilla.gnome.org/show_bug.cgi?id=720345
This makes sense in DASH reverse playback, where the upstream dashdemux
will download DASH segments in reverse order, but push their buffers
forward to qtdemux and mark each segment start as DISCONT. This needs
to be forwarded downstream to the parser/decoder, otherwise it won't work.
https://bugzilla.gnome.org/show_bug.cgi?id=734443
When writing out a trak with an edit list, make sure the
overall file duration is also updated to reflect the
lengthening of the stream.
Add some more debug to qtdemux to warn about streams that
are longer than the file and get truncated.
We only want to unlock if we push an event downstream and
jump to done_unlock label afterwards. We would also unlock
in case of a segment seek and then unlock again later, and
nothing good can come of that.
(This code looks a bit dodgy anyway though, shouldn't it
also bail out with FLOW_EOS here in case of a segment seek
scenario, just without the event?)
gst_matroska_parse_take() would return FLOW_ERROR instead of
FLOW_EOS in case there's less data in the adapter than requested,
because buffer is NULL in that case which triggers the error
code path. This made the unit test fail (occasionally at least,
because of a bug in the unit test there's a race and it would
happen only sporadically).
Decoder complains about "notification: Invalid mode encountered.
The stream is corrupted" though, even if it works, so there's
probably something wrong with the generated codec headers.
Implement 3 different cases for handling the SR:
1) we don't have enough timing information to handle the SR packet and
we need to wait a little for more RTP packets. In that case we keep
the SR packet around and retry when we get an RTP packet in the
chain function.
2) the SR packet has a too old timestamp and should be discarded. It is
labeled invalid and the last_sr is cleared.
3) the SR packet is ok and there is enough timing information, proceed
with processing the SR packet.
Before this patch, case 2) and 1) were handled in the same way,
resulting that SR packets with too old timestamps were checked over and
over again for each RTP packet.
This patch adds supports for the incoming key management parameters for
encryption and authentication key lengths.
It also adds a new signal request-rtcp-key that allows the user to
provide the crypto parameters and key for the RTCP stream.
https://bugzilla.gnome.org/show_bug.cgi?id=730473
Use a different variable name to make it clear that we are calculating
the header size.
Correctly check that we have enough bytes to read the header bits. We
were checking if there were 5 bytes available in the header while we
only needed 3, causing the packet to be discarded as too small.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=723595
Similarly to what we did with the DELTA_UNIT flag, this patch
propagates the DISCONT flag to the first RTP packet being used to transfer a
DISCONT buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=730563
Downstream elements may be interested knowing if a RTP packet is the start
of a key frame (to implement a RTP extension as defined in the
ONVIF Streaming Spec for example).
We do this by checking the GST_BUFFER_FLAG_DELTA_UNIT flag we receive from
upstream and propagate it to the *first* RTP packet outputted to transfer this
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=730563
Pre-allocate buffer list of the right size to avoid re-allocs.
Avoid plenty of double runtime cast checks and re-doing the
same calculation over and over again in rtp_vp8_calc_payload_len().
Only call gst_buffer_get_size() once.
Collect buffers to send out in buffer lists instead of
pushing out single buffers one at a time. For HD video
each frame might easily add up to a couple of thousand
packets, multiply that by the frame rate and that's a
lot of push() and sendmsg() calls per second.
A good reason to push out buffers as early as possible is
latency, so we don't accumulate the whole frame in a single
buffer list, but instead push it out in a few chunks, which
is hopefully a reasonable compromise.
Make sure that if AYUV is received it will detect that it can produce
both RGB and YUV formats
Signed-off-by: Ravi Kiran K N <ravi.kiran@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=725248
The code would previously crash trying to insert a NULL string
into a hash table.
It does seem a little broken that indexing is done by MIME type
and not by index though, unless the spec says there cannot be
two parts with the same MIME type.
https://bugzilla.gnome.org/show_bug.cgi?id=659573
This event was not sent. Send it before caps, this requires the pad to
be parented. This removes warning like: "Got data flow before
stream-start event".
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=731475
If the wav header contains an extended chunk, we want to keep
the codec_data field, but not for raw audio.
This fixes some elements (such as adder) from failing to intersect
raw audio caps which would otherwise be intersectable.
Handle the transformation matrix cases where there are only simple rotations
(90, 180 or 270 degrees) and use a tag for those cases. This is a common scenario
when recording with mobile devices
https://bugzilla.gnome.org/show_bug.cgi?id=679522
tentacle3d.c:268:7: error: using integer absolute value function 'abs' when
argument is of floating point type [-Werror,-Wabsolute-value]
if (abs (tmp - fx_data->rot) > abs (tmp - (fx_data->rot + 2.0 * G_PI))) {
^
tests.c:161:16: error: taking the absolute value of unsigned type
'unsigned long' has no effect [-Werror,-Wabsolute-value]
t->diff += labs (GST_BUFFER_TIMESTAMP (buffer) - t->expected);
1) sources that have sent BYE in the past cannot be senders, since
they would have timed out to being receivers in the meantime...
2) sources that have sent BYE are now being removed earlier inside
this function
If we are inserting a packet into the jitter queue we need to keep
looping through the items until the right position is found. Currently,
the code stops as soon as an event is found in the queue.
Regarding events, we should only move packets before an event if there
is another packet before the event that has a larger seqnum.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=730078
If two streams request a retranmission for the same SSRC, ignore the second
one if the first oen is less than one second old, otherwise time out the first
one and ignore the second.
As we now replace the local RTPSource on a conflict, it's no longer possible
to keep local conflicts in the RTPSource, so they instead need to be kept
in the RTPSession.
Also fix the rtpcollision test to generate multiple collisions instead of
one by change the address, as otherwise we detected that it was a single one.
If we're missing part of the clut, do not try to use it. It seems
very likely the break was meant to break out of the switch rather
than from the loop.
Coverity 1139878
Even if one woul hope one pixel can fit in a MTU, ensure we do not
overwrite a buffer if this is not the case.
Spotted while looking at Coverity 1208786
Rework the packet queue so that the most common action (insert a packet
at the tail of the queue) goes very fast.
Report if a packet was inserted at the head instead of the tail so that
we can know when to retry _pop or _peek.
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
gstdeinterlace.c: In function 'gst_deinterlace_output_frame':
gstdeinterlace.c:1537:57: error: 'pattern.length' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This actually is always initialized before it is used there, but
let's just silence gcc here.
Make a new method to disable the jitterbuffer buffering.
Rework the update_estimated_eos() method. Calculate how much time
there is left to play. If we have less than the delay of the
jitterbuffer, we disabled buffering because we might never be able to
fill the complete jitterbuffer again.
If we receive an EOS event, disable buffering. We will drain the
buffer and eventually push the EOS event out.
When we reach the estimated NPT timeout and we didn't receive an EOS
event, make one and queue it so that it can be pushed.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=728017
When the internal-ssrc property changes, we want to send a reconfigure
upstream to make payloaders use the new suggested ssrc.
Using the internal-ssrc property to change the SSRC of a stream is not a
good idea and doesn't work when there are multiple senders, we want to
set the SSRC directly on the payloaders. Therefore, deprecate this
property.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725361
Rework the logic to make buffering messages a little, make sure we
don't make the same message multiple times.
Consider the buffer full when EOS was received.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=728017
While it seems to keep a compile time selection, I traced it
to some code copied from videoconvert, where it was removed,
with the following comment:
Also remove the high-quality I420 to BGRA fast-path as it needs
the same fix, which causes an additional instruction, which causes
orc to emit more than 96 variables, which then just crashes.
This can only be fixed in orc by breaking ABI and allowing more
variables.
Thus, I remove it here as well.
Coverity 206064
When we are buffering, we can't block and wait for the serialized query
to complete because the jitterbuffer will not try to forward the query
while buffering. Instead, just refuse the query.
The caps query handling function for the sinkpads was called for
the srcpad, and the sinkpads had none. This commit moves it to the
right pad, but nonetheless the negotiation still looks wrong.
This makes the test pass again after the recent coverity fix
and also allows interleave to work again, but someone should
really review the negotiation code and fix it.
The marker bit isn't mandatory and we had in place code to guess AU
boundaries by detecting a new picture start. This guessing code
didn't work with interlaced content that has proper marker bits
to indicate the AU boundaries. It was leaking the first field buffer
and producing a corrupted output.
fixes: https://bugzilla.gnome.org/show_bug.cgi?id=728041
The code handles a -1 pattern index, and it seems plausible
that a pattern might be found later, so it seems best to not
send an element error here.
Coverity 1139766
Create and make a key for encrypting the RTCP packets back to the server
and wrap this in a MIKEY message that we send as a header in the SETUP
request.
... as sender should keep track of segment base accumulation.
Rather, it may have some adverse effects as a spurious segment event,
e.g. in collectpads.
Try to avoid using the request-pt-map to get caps but set them directly
on the udpsrc element. That way, the caps get nicely transformed as they
pass through the different elements in the rtpbin, including the AUX and
decoder/encoder elements.
Protect caps with the lock.
Don't push the caps event from the set_property function but mark the
pad for reconfiguration so that it will renegotiate and push the new
caps event in the streaming thread.
We should open the socket when going to NULL<->READY and not in the
start/stop vemthod, which is called in READY<->PAUSED. This makes it
possible to allocate a socket without going to PAUSED (and starting the
negotiation).
Instead the queued buffer might have an old caps while the pad
is already storing the information for a new caps. Mixing those
while handling buffers will often lead to issues
https://bugzilla.gnome.org/show_bug.cgi?id=725948
Remove caps restrictions that correspond to the default and are not
required in SDP. With the new usage of having pads require a subset
of the caps, they will make the negotiation fail.
The "encoding-params" is optional in the SDP, because we now require
a subset of the caps, it would fail caps negotiatioin if it wasn't present.
So removed it from the template caps.
Keep track of what streams we did the SETUP for. We only need to
configure caps, wait for pads and push events on setup streams. We can
remove the disabled state of the stream and simplify some checks.
After we setup a stream, skip the other streams that have the same
control url. Use a skipped flag to mark streams that should be skipped.
Call gst_rtspsrc_connection_flush (src, FALSE) to reset connections as
non-flushing before sending PAUSE and PLAY with the new npt range. Without this
patch, those commands would fail with EINTR as the connections were still
flushing.
It is placed inside a 'vids' struct, so it was being exposed on
a pad named video_%d. XSUB are subtitles and this patch adds
an special case for it to be exposed in a subpicture_%d pad
A media stream can have multiple payload types. Parse all the payload
types and collect the caps information. We then have to store the
pt<->caps mapping instead of 1 pt and 1 caps.
Parse the profile from the SDP and use that to negotiate the transport
instead of always using AVP.
Rework how we do some tweaks for ASF and Realmedia.
It is possible that the DTS is invalid (when we receive RTP packets from
TCP, for example). As a fallback, use the reconstructed PTS value to
calculate the buffer level.
gstrtpjitterbuffer.c: In function 'gst_rtp_jitter_buffer_loop':
gstrtpjitterbuffer.c:2978:3: error: 'result' may be used uninitialized in this function
while (result == GST_FLOW_OK);
^
Several conditional statements perform comparison on RTP sequence
numbers without taking the sequence number rollover into account.
Instead, use the gst_rtp_buffer_compare_seqnum function to perform the
comparison.
https://bugzilla.gnome.org/show_bug.cgi?id=725159
This fixes an issue with gst-rtsp-server where no sps and pps are
sent for the first intra frame, because the payloader starts working
already when receiving DESCRIBE but there is no transports so it tries
to send sps and pps, but that fails with a FLUSHING flow. But the time
for last sent sps and pps would still be set, so when PLAY arrives and
the first intra frame is to be sent there is no sps and pps sent due to
that time since last sps pps is less than spspps_interval.
https://bugzilla.gnome.org/show_bug.cgi?id=724213
In the case where we have no suitable candidate we post a warning and plug a
fake-element. Do the same when non of the candidate work.
This is more consistent and plugin the fakesink as a fallback is probably
helpful for running unit tests without requiring hardware src/sink elements.
Fixes#722981
Adds two extra checks:
- Sampling frequency on header can't be 15.
- Frame size should be at least 9 or 7, depending
on whether CRC protection is present.
https://bugzilla.gnome.org/show_bug.cgi?id=724638
Add support for a new property: tls-database. If the property is set,
the certificate database will be given to the rtsp connection if TLS
protocol is being used. If the server certificate can't be verified with
the default database, this additional database will be used.
https://bugzilla.gnome.org/show_bug.cgi?id=724396
It turns out that the change in gtk-doc-1.20 which wraps the |[]| content in
CDATA break xi:inlcude examples. As in a whole jhbuild checkout these where
the only 4, we're fixing them instead.
recv_rtp_sink: allow proxying of the allocation query.
send_rtp_sink: allow proxying of caps and allocation. This allows us to
query caps downstream as well as get an allocator from downstream.
send_rtp_src: allow proxy of caps, this makes the caps query do
upstream.
See https://bugzilla.gnome.org/show_bug.cgi?id=723850
It was used in the past in 0.10 when there was no explicit DTS
field in buffers, now we have it in 1.x series and we can
check it directly with GST_BUFFER_DTS_IS_VALID
Do not try to use subsequent buffer timestamps to calculate
sparse streams durations because the stream is sparse and
the buffers might not be 'time adjacent'. So rely on the
duration and give the option to the pad to provide
custom 'empty' buffers to represent the gaps in the
stream, this can vary on how the data is represented.
Right now, the only sparse stream supported is tx3g subtitles.
This reverts commit 9f7b1128b1.
This should be handled automatically be rtspsrc if the AVPF profile
is used, and manual enabling of it can be done with the new-manager
signal.
If the expected packet (do_next_seqnum is TRUE) is the one we requested
for retranmission earlier, do the logic to update the retransmission
statistics as well before setting up the timers for the next expected
packet.
Also reset the retransmission counter if the timer is reused for another
seqnum.
Add an accumulator that stops the signal emission as soon as a caps has
been retrieved. Otherwise the default handler would continue emitting
the signal and possibly overwrite the result with NULL again.
Uses information gathered during EBML parsing to
forge a more suitable set of caps instead of blindly
assuming everything is video/x-matroska.
For consistency, stream type reset was added to
matroska-demux too.
https://bugzilla.gnome.org/show_bug.cgi?id=722311
To do that, enqueue the EOS event to be sent from the srcpad task
thread and flush the queue right afterwards, so that no more rtx
buffers can be sent, even if there are more requests coming in.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=722370
The reason behind this is to minimize the retransmission delay.
Previously, when a NACK was received, rtprtxsend would put a
retransmission packet in a queue and it would send it from chain(),
i.e. only after a new buffer would arrive.
This unfortunately was causing big delays, in the order of 60-100 ms,
which can be critical for the receiver side.
By having a separate GstTask for pushing buffers out of rtxsend,
we can push buffers out right after receiving the event, without
waiting for chain() to get called.
Instead do it like all other demuxers and let parsers and decoders
handle that. The keyframe information inside the container might
be completely wrong like in the sample file of the bug report,
and if it is correct and we push no keyframes, then the parsers
and decoders will handle that properly anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=682276
Make sure empty segments are used and pushed with a gap event
to represent its data (or lack of it)
Each QtSegment is mapped into a GstSegment with the corresponding
media range. For empty QtSegments a gap event is pushed instead
of GstBuffers and it advances to the next QtSegment.
To make this work with seeks, need to keep track of the starting
'base' to make sure it remains consistently increasing when
pushing new segment events.
For example: if a seek makes qtdemux start from 5s, the first
segment will have a base=0. When the next segment is activated,
its base time will be QtSegment.time - qtdemux.segment_base so
that it doesn't include the first 5s that weren't played and
shouldn't be accounted on the running time
This purposedly will remove the fix made for
https://bugzilla.gnome.org/show_bug.cgi?id=700264, at this
point it was decided to respect the gaps, even if they cause
a delay on playback, because that's the way the file was crafted.
https://bugzilla.gnome.org/show_bug.cgi?id=345830
1) pt can be lower than 96
2) there is no point in checking that because rtprtxsend will not
even store buffers for payload types that it doesn't know about,
so this case will never be reached
This patch moves the creation of rtx packets to be done early,
in the src_event() function, when they are requested. The purpose
is to run gst_rtp_rtx_buffer_new() with the object locked to
protect internal data, because if it is done at the pushing stage,
we would have to lock and unlock multiple times in a row while we
are pushing the rtx buffers.
Previously there was no locking at all, which was terribly wrong.
According to ISO/IEC 13818-7, "channel_config" field in ADTS header
may have value of 0, as in the case of frame with PCE.
gst_aac_parse_detect_streams() returned FALSE for those frames
and discarded them.
The need for rewriting apparently is obsolete 0.10 leftover.
We now have caps for subtitles when we create the headers,
so we always write the correct data in the first place.
This avoids issues with writing dummy data first, then having
to come back and write correct data later. Doing so prevents
the muxed stream from being actually streamable.
https://bugzilla.gnome.org/show_bug.cgi?id=712134
Mov spec says it uses a pascal style string, while isomedia uses
a null terminated one. Store the current atoms flavor into the HDLR
to be able to generate the correct output.
https://bugzilla.gnome.org/show_bug.cgi?id=705982
This reverts commit b3aa8755fe.
We are already using the running-time because they were placed on the
buffers with gst_collect_pads_clip_running_time(). Arguably it would be
better to not modify the incomming buffers but collectpads seems to want
to use absolute timestamps from the buffers for finding the best buffer
(this can be changed with a custom compare function..).
This property allows you to specify the amount of buffers
to keep in the retransmission queue expressed as time (ms)
instead of buffer count (which is the max_size_buffers property).
The purpose of the sender RTX object is to keep a history
of RTP packets up to a configurable limit (in time). It will
listen for custom retransmission events from downstream. When
it receives a request for retransmission, it will look up the
requested seqnum in its list of stored packets. If the packet
is available, it will create a RTX packet according to RFC 4588
and send this as an auxiliary stream.
The receiver will listen to the custom retransmission events
from the downstream jitterbuffer and will remember the SSRC1
of the stream and seqnum that was requested. When it sees a
packet with one of the stored seqnum, it associates the SSRC2
of the stream with the SSRC1 of the master stream. From then
on it knows that SSRC2 is the retransmission stream of SSRC1.
This algorithm is stated in RFC 4588. For this algorithm to
work, RFC4588 also states that no two pending retransmission
requests can exist for the same seqnum and different SSRCs or
else it would be impossible to associate the retransmission with
the original requester SSRC.
When the RTX receiver has associated the retransmission packets,
it can depayload and forward them to the source pad of the element.
RTX is SSRC-multiplexed
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711084
AUX elements are elements that can be inserted into the rtpbin
pipeline right before or after 1 or more session elements.
The AUX elements are essential for implementing functionality such
as error correction (FEC) and retransmission (RTX).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711087
Keep track of elements that are added to multiple sessions and make sure
we only add them to the rtpbin once and that we clean them when no
session refers to them anymore.
When a collision is found on the internal ssrc, we have to change it.
Ideally, we want also the payloader upstream to follow this change and use
the new internal ssrc. Ideally we want this condition to be always met:
if there is one payloader sending on this session, its ssrc should match the
internal ssrc.
* gst/rtpmanager/gstrtpbin.[ch]: four new action signals have been
added (request-rtp-encoder, request-rtp-decoder, request-rtcp-encoder
and request-rtcp-decoder). The user will be able to provide encoders
or decoders dynamically. The encoders must follow the srtpenc API and
the decoders the srtpdec API. Having separate signals for RTP and RTCP
allows the user to use different encoders/decoders or provide the same
one (e.g. that would be the case for srtpenc).
Also, rtpbin now allows application/x-srtp in its pads.
https://bugzilla.gnome.org/show_bug.cgi?id=719938
Use the round-trip-time and average jitter to dynamically calculate the
retransmission interval and expected packet arrival time.
Based on patches from Torrie Fischer <torrie.fischer@collabora.co.uk>
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711412
Don't use the current time calculated from the tmieout loop for when we
last scheduled the NACK because it might be unscheduled because of a max
packet misorder and then we don't accurately calculate the current time.
Instead, take the current element running time using the clock.
Make it clear what should be handled purely by mss mode:
1) Expose the streams on the first moof as there are no moov atoms
2) Properly cleanup streams on flushes
Add a note about the meaning of upstream_newsegment and mss_mode
for future reference.
Make all other special fragment handling shared for both dash
and mss streams.
In a fragmented scenario, qtdemux is operating in push mode
and it gets a fragmented buffer. While processing its data
downstream gets unlinked (or a input-selector changes its
active pad and returns not-linked). Qtdemux stops processing
this fragment and returns not-linked upstream, leaving the
remaining data in its adapter.
When it gets an EOS it should make sure that all the data it
had received is pushed before pushing EOS.
According to RFC 5104 section 4.3.1.2, RTCP PSFB FIR message SHALL
have a media_ssrc field set to 0. The actual media ssrc is in the FCI.
So in that case, we ignore the retained feedback and just let it through
to the rtp_session_process_fir() function which will check for the actual
SSRC inside the FCI.
Fixes a regression introduced by commit 57c27ec3
Previously, when the session had multiple internal sender SSRCs, it would
issue SR reports with RB blocks only on the first RTCP timeout and afterwards
SR reports would be sent empty. This was because the "generation" number
in RTPSource would increase more than once during the same cycle and afterwards
it would always be greater than the session's generation, which would cause
it to be skipped from being included in RBs.
This commit fixes this problem by:
1) Increasing the RTPSource generation only at the end of each cycle,
which essentially fixes the problem but only when the internal senders
are less than GST_RTCP_MAX_RB_COUNT.
2) Keeping for each RTPSource a set of SSRCs which stores which SSRC's
SR the given RTPSource has been reported in, which also fixes the problem
when the internal senders are more than GST_RTCP_MAX_RB_COUNT. This is
necessary because of the fact that any RTPSource is marked as reported
in itself's SR and makes it impossible to know if it has been reported
in other SRs too or not, and which.
Keep an extra stats structure for scheduling the BYE packets. When we
decide to schedule BYE, make a copy of the current stats into the
bye_stats. Then while we schedule the BYE, update and use only the
bye_stats. When we finished scheduling the BYE packet, we use the
regular stats again.
When we are scheduling BYE packets, ignore all RTCP for the sources that
are scheduling a BYE packet. Other sources that are not scheduling BYE
should continue receiving RTCP packets as usual.
Some buffers can have multiple moov atoms inside and the strategy
of using the gst_adapter_prev_pts timestamp to get the base timestamp
for the media of the fragment would fail as it would reuse the same
base timestamp for all moofs in the buffer instead of accumulating
the durations for all of them.
Heres a better explanation of the issue:
qtdemux receives a buffer where PTS(buf) = X
buf -> moofA | moofB | moofC
The problem was that PTS(buf) was used as the base timestamp for
all 3 moofs, causing all buffers to be X based. In this case we want
only moofA to be X based as it is what the PTS on buf means, and the
other moofB and moofC just use the accumulated timestamp from the
previous moofs durations.
To solve this, this patch uses gst_adapter_prev_pts distance
result, this allows qtdemux to calculate if it should use the
resulting pts or just accumulate the samples as it can identify
if the moofs belong to the same upstream buffer or not.
https://bugzilla.gnome.org/show_bug.cgi?id=719783
The parser can accept input that is not completely specified. Use the
ACCEPT_INTERSECT flag on the sinkpad to tweak the acceptcaps function to
check for intersection only. This allows us to proxy downstream
constraints while still allowing non-subset caps as input.
We can then also remove the appended template caps workaround.
Make a unit-test to check the new feature.
This reverts commit 26040ee38c
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=705024
In SmoothStreaming fragmented scenario, the timestamps are calculated
starting from the fragment buffer timestamp. When there is a not-linked
return from downstream, qtdemux will return upstream and will keep the
non-pushed data into its adapter.
On a new fragment buffer pushed to qtdemux, the new buffer timestamp
would overwrite the previous one that should be used on the still
to be pushed buffers. Because of this, this patch will also
update the fragment_start timestamp from the adapter last pts
to make sure the moof and timestamps are in sync and will result
in correct timestamps for all fragments.
In the scenario of "mdat | moov (with fragmented artifacts)" qtdemux
could read the moov again after the mdat because it was considering the
media as a fragmented one.
To avoid this loop this patch makes it store
the last processed moov_offset to avoid parsing it again.
And it also checks if there are any samples to play before
resturning to the mdat, so that it knows there is new data to be played.
https://bugzilla.gnome.org/show_bug.cgi?id=691570
When parsing a trak only free streams on failures if those streams
were created locally. They could have been created from a previous
fragment, in this case we they have valid info from the other fragment.
Including pads.
https://bugzilla.gnome.org/show_bug.cgi?id=691570
Don't reset the expected output seqnum when clearing the pt map because this
could stall the jitterbuffer forever.
Add a unit test for this.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=709800
As for text subtitles and as suggested in #712643, throw
away the 2 byte terminator packets that some encoders insert.
This will make things better when remuxing and causes generation
of gap events.
Otherwise there were race conditions where we would send tags
on a flushing srcpad.
We have a test for that in GES, but this should be tested
systematically with harness in the future as I believe it
is useful for exactly that kind of cases.
https://bugzilla.gnome.org/show_bug.cgi?id=708165
Clean up the handling of mp4s streams. Use the generic esds
descriptor function to extract the palette, instead of hard coding
a wrong magic offset.
Add some more size safety checks when parsing ES descriptors, and
replace magic numbers with the descriptive constants that are already
defined.
Enhance dump output for stsd atoms.
Streams from both bug 712643 and historic bug 568278 now both work
correctly.
Fixes: #712643
Remove bogus reconfigure event on collision, we don't want to send the event on
the receiving RTP pad and the collision event is now handling this
case.
See https://bugzilla.gnome.org/show_bug.cgi?id=711560
The problem here was that the jitterbuffer lock was unlocked to push
the event, but that caused another thread to remove the timer currently
being processed, probably because the amount of rtx events
(and therefore timers) was getting too high. The solution is to
unlock and push the event only after timer processing has finished.
fixes https://bugzilla.gnome.org/show_bug.cgi?id=711131
Restore the behavior of the element to the state before commit
db29522a43. A non-empty header is
generated and when the EOS event is received the header is generated
again, this time with the correct size.
https://bugzilla.gnome.org/show_bug.cgi?id=711699
An internal sender in a session is also a receiver of its own packets so update
the receiver stats. Other senders in the session will use this info to generate
correct RB blocks in their SR reports.
Assume a file with atoms in the following order: moov, mdat, moof,
mdat, moof ...
The first moov usually doesn't contain any sample entries atoms (or
they are all set to 0 length), because the real samples are signaled
at the moofs. In push mode, qtdemux parses the moov and then finds the mdat,
but then it has 0 entries and assumes it is EOS.
This patch makes it continue parsing in case it is a fragmented file so that
it might find the moofs and play the media.
https://bugzilla.gnome.org/show_bug.cgi?id=710623
In push mode, when qtdemux can't use a seek to skip the mdat buffer it has
to buffer it for later use.
The issue is that after parsing the next moov/moof, there might be some
trailing bytes from the next atom in the file. This data was being discarded
along with the already parsed moov/moof and playback would fail to continue
after the contents of this moov/moof are played.
This is particularly bad on fragmented files that have the mdat before the
corresponding moof. So you'd get:
mdat|moof|mdat|moof ...
When a moof was received, it usually came with some extra bytes that would
belong to the next mdat (because upstream doesn't care about atoms alignment).
So those bytes were being discarded and playback would fail.
This patch makes qtdemux store those extra bytes to reuse them later after the
mdat is emptied.
https://bugzilla.gnome.org/show_bug.cgi?id=710623
Add a new timestamp mode that assumes the local and remote clock are
synchronized. It takes the first timestamp as a base time and then uses the RTP
timestamps for the output PTS.
matroska-demux.c: In function 'gst_matroska_demux_add_stream':
matroska-demux.c:1379:7: error: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'guint64' [-Werror=format=]
"%03u", context->uid);
^
WebM has a couple of specific requirements we need to handle.
Idea is to set this flag once and just rely on mux->is_webm
at run time instead of repeatedly figuring this out from
GST_MATROSKA_DOCTYPE_WEBM (which requires a strcmp()).
WebM spec states SegmentUID is Unsupported. Files produced
with gstreamer without this change will spit an error like
this when passed to mkvalidator:
ERR201: Invalid 'SegmentUID' for profile 'webm' in Info at 192
When flush-stop arrives before we process the result of the _push() in the
loop function, we might pause even though we are not flushing anymore. Fix this
race by waiting for the srcpad loop function to completely pause after doing the
flush-start.
If we were not waiting for the missing seqnum when we insert the lost packet
event in the jitterbuffer, we end up not updating the next_seqnum and wait
forever for the lost packets to arrive. Instead, keep track of the amount of
packets contained by the jitterbuffer item and update the next expected
seqnum only after pushing the buffer/event. This makes sure we correctly handle
GAPS in the sequence numbers.
Doing so would be a regression over 1.0 and breaks the unit test.
However the result will be most likely unusable, so let's post
a warning message on the bus.
Use g_date_time seconds manipulation to allow to cover the quicktime
spec for creation_time. It uses seconds since 1904.
Both paths could be done using the generic approach of seconds since
1904 with GDateTime handling, but the first path using seconds from
1970 should be more commonly found and avoids a few objects creation and
ref/unref, so keep it there for performance.
Additionally, the code for handling seconds since 1970 changed from >
to >= because having 0 seconds since 1970 is also a valid case for that
path to handle.
https://bugzilla.gnome.org/show_bug.cgi?id=707975
Always prepare a lost event in the jitterbuffer, it is to wake up and make the
pushing thread continue. We drop the event when we are not supposed to push lost
events downstream.
Schedule the lost event by placing it inside the jitterbuffer with the seqnum
that was lost so that the pushing thread can interleave and push it properly.
Make the jitterbuffer operate on a structure containing all the packet
information. This avoids mapping the buffer multiple times just to get the RTP
information. It will also make it possible to store other miniobjects such as
events later.
Improve the order of the timeout events, if there are timers with the same
timeout, we want to trigger the lowest seqnum first. For this we need to loop
over the complete array of timers to find the best one before triggering the
timeout.
First send the lost event, then update the next_seqnum counter and then
send the signal to the pushing thread that it can retry to push a buffer. This
avoids pushing out buffers before the lost event is pushed.
There is no need to unschedule the timer in flush-start, flush-stop will remove
the timers and unschedule.
Unschedule the current timer before attempting to join the timer thread.
Use the more correct POFFSET macro to get the offset of a component in its
plane. The offset macro gives the offset of the component relative to the start
of the frame.
clang does not want or need a clobber list for emms:
error: clobbers must be last on the x87 stack
Patch taken from the FreeBSD ports, provided by
Dan McGregor <dan.mcgregor@usask.ca>
The streamable property only make sense for fragmented formats.
For regular MP4, when downstream is not seekable we can't rewrite
the headers, so qtmux can only work with fast-start=TRUE, where
the headers are written finishing the file.
For fragmented MP4, when streamable is not seekable and the streamable
property is FALSE, we must enforce streamable=TRUE warning the user
about this change
https://bugzilla.gnome.org/show_bug.cgi?id=707242
The most common use case for fragmented MP4 (Dash and Smooth Streaming)
is producing streamable content (even for VOD). streamable=FALSE would only
be used to generate fragmented MP4 with and index of MOOF's that could
be reproduced without a playlist/manifest
https://bugzilla.gnome.org/show_bug.cgi?id=707242
Don't assume planar formats have just one memory block with the data but use the
macros to access the right memory block where a component can be found.
Keep a separate delay in the timer so that we still know the original timestamp
of the packet that this timer refers to. We can then place the correct
running-time in the Retransmission event.
Instead of pushing the lost event from the chain function, schedule a timeout
that will push the lost event from the timer thread. This avoid blocking the
upstream thread while we push and sync the event.
When we have a large number of missing packets, generate one lost event for all
the packets that have no chance of being pushed out in time.
Fix and activate unit test for large gaps.
Keep track of the current time in the timeout loop.
Loop over all timers and trigger all the expired ones, we can do this in the
same loop that selects the new best timer.
Also update the timers when retransmission is disabled. We need to
do this because when we added LOST timers when we detected missing packets and
we need to remove those timers when the packet finally arrives.
Check for GST_SEEK_TYPE_NONE for stop poistion and only update
the stop time if it is requested. Otherwise just maintain whatever
was stored at the segment
https://bugzilla.gnome.org/show_bug.cgi?id=707530
We keep the DTS and PTS in running-time inside the jitterbuffer. Make sure to
transform it back to a buffer timestamp before pushing out the buffer.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707931
When the segment has a defined stop position, qtdemux should check
when streams reach this position and mark those as EOS. When all
streams are EOS it will return GST_FLOW_EOS to upstream to allow
the pipeline to finish instead of continuously consume buffers
from upstream that are not useful for the segment.
https://bugzilla.gnome.org/show_bug.cgi?id=707530
When handling seeks in push mode, qtdemux converts the seek to bytes
and pushes upstream. It needs to keep track of the seek and the
subsequent segment to be able to map them back to the requested
seek time and properly preserve the segment stop of the seek.
This is done by using the start offset in bytes of the seek,
that should be the same of the segment from upstream. And this
is also backwards compatible with what qtdemux already was using.
https://bugzilla.gnome.org/show_bug.cgi?id=707530
Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new
structure for fragmented MP4 called "avc3". The principal difference
between AVC1 and AVC3 is the location of the codec initialisation
data (e.g. SPS, PPS). In AVC1 this data is placed in the initial
MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data
goes in the first sample of every fragment (i.e. the first sample in
each mdat box). The principal reason for avc3 is to make it easier
for client implementations, because it removes the requirement to
insert the SPS+PPS in to the decoder pipeline every time there is a
representation change.
This commit adds support for the "avc3" atom, which is almost identical
to the "avc1" atom, except it does not contain any SPS or PPS data.
https://bugzilla.gnome.org/show_bug.cgi?id=702004
On Windows it's not possible to bind to a multicast address
but the OS will make sure to filter out all packets that
arrive not for the multicast address the socket joined.
On Linux and others it is necessary to bind to a multicast
address to let the OS filter out all packets that are received
on the same port but for different addresses than the multicast
address
And deprecate the multicast-group property and replace it with the
address property.
https://bugzilla.gnome.org/show_bug.cgi?id=707042
RTP buffer allocation should not be done with padding for the specific MPEG2
header as the padding is done at the end of the buffer and the last byte is
the size of the padding.
https://bugzilla.gnome.org/show_bug.cgi?id=706970
This should make decoders able to precisely push buffers until the stop
time in case they need the next keyframe to do it.
Also, according to gst_segment_clip, it should only push a buffer that
the starting ts is strictly smaller than the segment stop, so we change
the min < comparison for <=
Don't update the next RTCP check time in all cases but only when we
reconsidered. This avoids delaying sending a full RTCP packet when we
are doing early feedback.
We can't use the clock to time our config-interval because we are not
live (or there might not be a clock or the clock might not be running).
Instead just simply take the timestamp diff.
This is to make sure tags are cleared on the client if the
stream-start was previously lost, otherwise, the client may end
up with a merged taglist of multiple songs
This is useful in case the packet containing the inlined caps was lost
or if new client joins an already running RTP stream and they missed
the previous tag events.
This also makes the payloader keep a list of merged tags so the retransmitted
tag event contains all previously received. A STREAM_START event will
flush the list of tags.
This is necessary to fix event/caps sending. If we send a STREAM_START
packet, it will cause an error because the stream didn't receive its
caps and new-segment events, so we must wait for the first buffer before
sending the stream-start event buffer. However, the caps will be sent
at the same time and so the 'inline caps' will be set for the event.
We need to be able to payload individual packets (data, caps or events)
and only send them when we call flush.
Restructure handling of incomming packet and the gap with the expected seqnum
and register all timers from the _chain function.
Convert a timer to a LOST packet timer when the max amount of retransmission
requests has been reached.
This patch will prepend ADTS headers to raw AAC audio frames, allowing
upstream elements to link to decoders that only support AAC in ADTS format.
Note that no error correction bits are added to ADTS frames in this code.
https://bugzilla.gnome.org/show_bug.cgi?id=615740
In some cases the src caps determined by goom weren't writable, causing
a bunch of assertion failures and failed caps. Fixed by always
explicitely making the caps writable
https://bugzilla.gnome.org/show_bug.cgi?id=705475
If we change the seqnum of an existing timer and we were waiting for
that timer, unschedule it. If we change the timeout of an existing timer and we
were waiting on it, only unschedule when the new time is smaller.
Make the jitterbuffer schedule the timeouts based on the DTS instead
of the PTS. This makes it all smoother with reordered frames and gives
the decoder time to reorder the frames in time.
Refactor the jitterbuffer code. Make separate function for peeking a buffer,
pushing the next buffer, waiting for timeouts and handling the timeouts.
The main loop now tries to push as many buffers as it can until it runs out of
buffers or when it detects a seqnum discont. Then it will wait for some event to
happen before attempting to push more buffers.
Make methods to register timeouts in an array. These timeouts are registered
when we detect a missing packet, sync for the first packet or when we find an
estimation for the end-of-stream.
This greatly simplifies and clarifies the code and also makes it possible to
register more complicated timeout schemes later.
Make a method to suggest the best available SSRC. This is the SSRC of the last
created internal source and is used to instruct upstream to produce this
SSRC.
Store the BYE reason in our internal source object. Rename the methods on the
source object a little because now the BYE can be received in RTCP or
set when the session wants to send BYE.
Some muxers (eg, qtmux) only support raw AAC, so this allows linking
an encoder that outputs ADTS only to those muxers.
The conversion is simple (omit the first 7 or 9 bytes of the frame),
but has to be done in pre_push instead of handle_frame as 1.0 does
not seem to allow skipping bytes there as 0.10 used to.
Other conversions are not supported (yet).
According to http://wiki.multimedia.cx/index.php?title=ADTS,
the value stored in ADTS headers is one less than the object
type of the AAC stream.
A look at ffmpeg shows it also adds 1 to the value read off
the ADTS header.
Note that this might break other things that happen to have
an inverse off by one to match the existing code.
Use the same seqnum on messages and events for derived events.
Fixed for flushes / stream-start / segment after a seek, and segment
after a segment.
Fixes#676242
rtpbin can now send a custom in-band downstream event which informs
downstream that the bin has received an RTCP SR packet. This is useful
for applications which want to drop the initial unsynchronized received
RTP packets.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703560
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
There could be a case where:
1) you do a new set_caps after buffers have been processed.
2) ts_offset gets set to a different value, eg 0.033333333
3) your pads get EOS, but the check dor that doesn't work
because you use ts_offset + a truncated value < segment.stop
4) so in the next collected, you end up comparing for example:
0.9999999999 > 1., which is false and means you don't send EOS.
Also adds scale_round in two other places where it potentially could
have caused problems.
cca2f555d1 introduces a regression, where the demux segment is not
reset on flush stop, so the next upstream segment event will calculate
an invalid base time on the new segment to be sent downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=704255
We'll have to pop buffer from collectpads and store it
internally only to get the timestamp of the next buffer.
If we continue to keep it in collectpads, no new buffer
to calculate the end time will ever arrive.
https://bugzilla.gnome.org/show_bug.cgi?id=703743
Call reset-sync on the rtpbin before we go to playing. This makes us require SR
packets for all streams again before we attempt to sync them. If we don't reset,
it might be that we combine SR packets from before and after the PAUSE/PLAYING
state change and end up with huge bogus offsets.
Don't throw away the first RTCP packet if it arrives before the first
RTP packet but remember and use it to signal sync once we get the
RTP packet.
See https://bugzilla.gnome.org/show_bug.cgi?id=691400
When we go to paused, we first flush the connection and then send the pause
command. As a result of the flushing, the scheduled paused command can get
lost. Wait until the connection is completely flushed and the rtsp task is
waiting before issuing the paused or playing request.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702705
This can only reliably work if demuxers have a
separate streaming thread per srcpad. This should be
done in a demuxer base class, which integrates parts
of multiqueue
https://bugzilla.gnome.org/show_bug.cgi?id=701856
bug #700505
Following a representation change that causes a resolution change,
the video decoder fails to decode correctly. Dashdemux detects the
representation change and pushes a new caps event and an
initialization segment (a new moov atom) to the downstream qtdemux,
but it doesn't handle this new moov yet, it will only parse the
first one it receives.
This commit changes qtdemux to accept a new moov in a dash bitstream
switching scenario.
Lock the state of the all our elements and manage their states
outselves. Because we are working async, we can't rely on the state
change function to set the state at the right time or to return the
right return value from the state change function.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702046
Use special variants for the case when we don't change the panorama (pan=0.0).
Simplify the processing functions by passing the panorama value directy instead
of the instance. Use orc for clearing buffers too.
When the segment start is not 0, this created a situation where
the output_end_time is inferior to output_start_time, and the duration
of the next buffer ended up underflowing.
https://bugzilla.gnome.org/show_bug.cgi?id=701385
This reverts commit 61666898cf.
This commit changes what the set_sps_pps() function does, not it doesn't
set caps anymore (and should have been renamed). The main problem is that
not all call sites are updated and thus leak the string.
It is not needed to do a state change from the _play() function on
ourselves. The state change function already did that and we don't want to
interfere with that (or use hacks to avoid interference).
Also send stream-start and segment event on the RTCP pad.
We don't need to send anything on the sync_src pad because we
already forwarded all incomming events.
