Detect EOS faster.
Try to reuse one of the input buffer as the output buffer. This usually works
and avoids an allocation and a memcpy.
Be smarter with GAP buffers so that they don't get mixed or cleared at all. Also
try to use a GAP buffer as the output buffer when all input buffers are GAP
buffers.
It may not be uncommon for the input timestamps to experience some jitter
around the 'perfect time'. As such, instead of regularly adding and dropping
samples, optionally allow for some tolerance in a more relaxed approach.
API: GstAudioRate:tolerance
This is necessary because the sinks don't notice the group switches
and the decoders/demuxers have a different running time than the
sinks.
Fixes bug #537050.
In some cases (all buffers dropped by a parser) a decodebin2
chain might receive an EOS before it gets enough data to
expose a decoded pad. In the case that no streams can expose
a pad we should error out instead of hang.
Fixes#542758
Just counting how many messages were sent and how many were received
is not good enough because they might've been duplicated (e.g. by the
visualization audio tee). Comparing the sequence numbers should give
better results in that case.
Otherwise the async state change from READY->PAUSED of the
uridecodebins will take playbin2 from PLAYING->PAUSED again
during gapless group switches.
Fixes bug #602000.
When a decodebin2 receives no-more-pads of a group it
can set that group's multiqueue buffering thresholds to
'playing' buffering method, avoiding that it buffers
too long and cause problems when using with queue2.
See the associated bug for details.
Fixes#600787
During a group switch return the cached duration of the old group
because the old group still didn't finish playback. If we have no
cached duration return FALSE.
Fixes bug #585969.
Make sure, to only "simulate" subtitle no-more-pads if it was still
pending and also handle errors in the subtitle pipeline as warnings
after the subtitles prerolled.
Don't set the suburidecodebin to READY after errors, handle_message
will usually be called from the streaming thread and doing that
from there is obviously not a good idea.
Now the caps property isn't set anymore for the subtitle caps
but instead in the autoplug-continue signal it is detected
if the caps belong to a supported subtitle stream.
This makes automatic use of newly installed plugins.
First of all, make sure that suburidecodebin never
errors out because of not-linked in case external subtitles
are used but then subtitles are disabled.
And then make sure that external subtitles always start from
the correct position and are not racing until EOS if they
get unselected and selected again.
This will make sure that no subparse is ever plugged and subtitleoverlay,
that subpicture streams are handled the same was as subtitles and that
subtitle renderers are used if available.
Fixes bugs #595123, #570753, #591662, #591706.
Using the object lock here can and will lead to deadlocks because
of deep-notifies of property changes: the deep-notify handler will
get the parent of objects, which will take the object lock again.
Fixes bug #600479.
Use the faster gst_element_link_pads because we know for sure the sinkpad name
and we don't need to have the function search for a suitable pad anymore.
We want to return NOT_LINKED for unselected pads but only for pads
from the normal uridecodebin. This makes sure that subtitle streams
are not raced past audio/video from decodebin2's multiqueue.
For pads from suburidecodebin OK should always be returned, otherwise
it will most likely stop with an error.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
Set the output caps on the srcpad before pushing the buffer because else core
will do a rather expensive check to see if we can actually accept those caps on
the srcpad.
Install a custom acceptcaps function instead of using the default expensive
check. We accept whatever downstream accepts so we pass along the acceptcaps
call to the downstream peer.
* memcmp is expensive and was being abused, reduce calling it by checking
the first byte.
* iterating one byte at at time over 64 kbites introduces a certain overhead,
therefore we now do it in chunks of 1024 bytes
And I do mean over 300 times. The average instruction call per mxf_type_find
was previously 785685 and it's now down to 2458 :)
I also renamed glib_enum_prefix to glib_gen_prefix as we also use that for the
marshallers. Also rename the rtsp-marshal.list to work with the unified prefix.
instead of printing an error that no corresponding group could
be found. no-more-pads from non-demuxer elements doesn't give
any additional information because there can only be a single srcpad.
Fixes bug #598288.
This allows partial group changes, i.e. demuxer2 in the example below
goes EOS but has a next group and audio2 stays the same.
/-- >demuxer2---->video
demuxer--- \--->audio1
\--->audio2
This now keeps track of everything that is going on, creates
a tree of chains and groups to allow "demuxer after demuxer" scenarios
and allows chained Oggs with multiple streams (needs oggdemux or playbin2 fixes).
Also document everything in detail and give a general overview of what
decodebin2 is doing at the top of the sources.
Fixes bug #596183, #563828 and #591677.
Pad blocks should never be done on external pads as outside elements
might want to use their own pad blocks on them and this will lead to
conflicts and deadlocks.
Adds a pattern with out-of-gamut colors in a checkerboard
pattern with in-gamut neighbors. Useful for checking YCbCr->RGB
color matrixing. Correct matrixing and clamping will cause the
checkerboard pattern to be invisible.
This allows using playsink from outside the playback plugin.
Add code to be able to request the sink pads using standard GStreamer API.
TODO : expose GObject properties/signals.
Add a property that makes videorate skip to the first buffer it
receives instead of padding the stream from segment start to the
first real buffer.
Fixes bug #567928.
videotestsrc rounds chroma down. This causes it to omit the last chroma
value completely for odd widths when the chroma is downsampled.
This patch special cases the last pixel to not be rounded down.
Disable headerless flac typefinder as long as it happily typefinds anything
including /dev/urandom as flac and as long as it's not particularly useful
given that such streams don't really exist in the wild.
Also fix up some comments so that gtk-doc doesn't complain about them.
This is a standard Midi file format that should be supported by
all Midi decoders and also has the mimetype audio/mid according to
the Midi specification homepage.
Fixes bug #594094.
Its purposes is mainly to avoid false positives (e.g. mp3 typefinder
reporting a 20% probability and somesuch). Won't be registered if
the gio plugin has been disabled via ./configure --disable-gio.
Also use the capsfilter if there is no src-peer as the caps constrain what
we can do. Don't create any_caps as a default, as we check for NULL to skip the
filtering. This is a (small) performance regression as we always intersect
otherwise.
g_value_set_object() increases the refcount of the sink, which is not needed
because the object should already be refcounted. Make sure this is always the
case and use g_value_take_object().
Fixes: #592884
Before, SEEK events would be sent to the video sink, which wouldn't
be linked in any way to the subtitle part of the pipeline and
subparse would never see the SEEK event. This would then seek
the audio/video but the subtitles would continue from the old
position instead.
Fixes bug #591664.
The problem with an error message is, that it will stop playback completely
while it could be that only a audio decoder plugin is missing and the video
could be played with the available plugins.
See bug #591677.
Before we had STREAM/WRONG_TYPE but it's really CORE/MISSING_PLUGIN
because a plugin is missing and nothing else is wrong.
Also make it an error instead of a warning.
Really fixes bug #591677.
Don't do fallbacks if application specified a sink element. When doing the
fallback use configured default elements instead of hardcoded linux only
elements. Improve error messages accordingly.
If a downstream element returns an error while upstream has already
put all data into queue2 (including EOS), upstream will no longer
chain into queue2, so it is up to queue2 to perform some
EOS handling / message posting in such cases. See #589991.
This later allows to handle interlaced AVPicture different than
progressive ones which is needed for horizontally subsampled YUV
formats, see bug #589242.
There are flac-in-ogg files without the usual flac packet framing
and these files just have a 4-byte fLaC ID packet as first packet.
We need to recognise the type just from these four bytes if we
want oggdemux to recognise these streams correctly.
Rename the GType of the pads of playbin's internal stream selector
element so they don't use the same type name as input-selector's
pads. Fixes#589622.
We can't call gst_element_send_event() from a streaming thread as it gets the
state lock. Instead call the send_event method directly until we have a nice API
for this in basesrc.
Fixes#588746
Keep track of the max requested position and compare this to the write position
in the temp file to get the current amount of buffered data.
Fix memleak of all incomming buffers.
Fixes#588551
We shouldn't really depend on elements from -bad for stream
selection in playbin2, so use a private copy of input-selector
until the selector plugin is ready to be moved to -base or -good.
Fixes#586356.
Differentiate subtitle streams and lyrics/cracktastic/complex streams via
the category string in the headers. This seems like a useful distinction
to make, and also seems more future-proof. See #525743.
Don't flush the file by closing and opening it but instead use g_freopen. This
avoids a deadlock in shutdown because we emit the temp-location property change
with the wrong lock held.
Fix the construction of the temporary filename construction as the application
name can be NULL and we don't want a separator between the prgname and the
template.
Add a download property that will attempt to configure queue2 into progressive
download buffering.
Make sure we only enable download buffering for quicktime and flv formats.
Add a new temp-template property so that queue2 can securely allocate a
temporary filename. Deprecate the temp-location property for setting the
location but still use it to notify the allocated temp file.
Adder can only handle one common format accross the pads. Thus one needed to add
a capsfilter afterwards and manage the caps. Now one can simply set the caps on
the property.
If READY->PAUSED failed in the source element we would've swapped
the current and next group already. To allow READY->PAUSED to succeed
after the first failure we have to swap the current and next group
back again. This also ensure that we're again in the same state
as before the failed state change and not at the next group.
This was especially a problem for playbin2 pipelines that use the
new mounting support in giosrc as the source would fail for READY->PAUSED
the first time, the application mounts the location and then tries
to go READY->PAUSED again (and this time it would succeed).
Fixes bug #588078.
This ensures that collectpads' cookie is properly updated so that when the streaming
threads will restart and be checking for the flushing status of all pads there will
be no inconsistent state.
This patch adds support for stationary white Gaussian noise.
The Box-Muller algorithm is used to generate pairs of independent
normally-distributed random numbers.
Fixes bug #586519.
When a seek failed upstream, make sure the adder sinkpad is set unflushing again
so that streaming can continue.
We only have a pending segment when we flushed.
Set the flush_stop_pending flag inside the appropriate locks and before we
attempt to perform the upstream seek.
Add some more comments.
Use the right lock to protect the flags in flush_stop.
See #585708
Set the target state of the newly added uridecodebins to somthing else that
PAUSED so that we keep their state in sync with the playsink state.
Fixes#585268
At least do the fix to sent the flush_stop when seeking failed to ensure we
keep no pads flushing. before it was send when the seeking worked which is just
plain wrong and was not the intention.
When no flush-stop has been sent by upstream, we have to send one ourselves to
continue playback. Do this as soon as the collect function is called instead of
after we possibly pushed segment events (that got then flushed out)
uridecodebin expects the passed connection-speed value in kbps, so we
need to divide the value stored in bps by 1000. Also, lower the upper
limit on the properties to the value that we can actually store in our
internal guint (which is plenty high enough)
Be even less restrictive in what we accept for .srt timestamps when
typefinding and parsing subrip subtitles and add a unit test for
the 'new' format. Fixes#585197.
When we are probing for streams, we want to set the queue size in such a way
that we can scan a maximum amount of data without consuming too much memory.
Therefore, remove the time limit on the queue and only stop scanning after 2MB
of data.
See #584104.
Recognise PGS subpicture streams and connect them to the SPU pad
in playsink. Unfortunately this fails badly with negotiation errors
if the SPU is not recent enough to support the stream. I'm not sure
how to add format negotiation in yet.
When using an audio sink without a "volume" property, volume control
would only work for the first song. For the next song, we'd try to
re-use the existing audio chain, but inadvertently set chain->volume
to NULL instead of to the existing volume element.
playbin2 inadvertently used autoaudiosink and autovideosink up to now,
since it would overwrite the sinks configured via the "audio-sink"
and "video-sink" properties with the stream-specific group sinks when
configuring the outputs. Those are usually NULL however, so that would
overwrite the configured sinks with NULL which makes playbin2 then
default to the auto sinks. Fix this by keeping a reference to each
configured sink in playbin2 and setting up the right sinks depending
on whether there is a stream-specific sink or not.
Fixes#584020.
Use two flags to remember volume/mute changes at times when we don't have the
audiochain yet (e.g. construction). Only set values when they were actualy
changed. This makes pulseaudio's stream restore functional.
Adder was relying that something else sends a flush stop. When using adder with
a livesource it was not getting a flush_stop and thus all pads downstream where
keept flushing. Mark a pending flush_stop and send it when we are working on
the new segment back in the streaming thread.
Add a queue2 after the raw output pads of certain sources such as those for uris
like cdda://
No tuning of the queue is done yet as the defaults seem to work fine for me.
Fixes#582528
The enum nick should be 'sine-table', not 'sine table'. Technically this is
an API/ABI change I guess, but anyone who was using this and didn't report
it deserves this.
Handle buffers with -1 timestamps better by keeping track of the en time of the
previous buffer and assuming the -1 timestamp buffer goes right after the
previous one.
when we have two buffers that are equally good, output the oldest buffer once to
minimize latency.
don't try to calculate latency when the input framerate is unknown.
Keep track of the autoplugged custom sinks and configure them in the playsink
element when we have collected all streams.
Also make sure that we only select one custom sink.
When unreffing the internal sink, we don't need to change the state to NULL.
mp3_type_find could suggest already when only a single valid header
was found, if it ran out of data before the end of the next frame.
Therefore, ignore the last found frame if it was incomplete.
Fixes bug #579692.
Make playsink go async to the PAUSED state instead of relying on uridecodebin
for async behaviour in playbin. This solves some problems (mainly with DVD)
where the pipeline would go to PLAYING before preroll completed, failing to
select the audiosink clock.
Fixes#581727
When calculating the input/output buffer sizes in the transform_size function,
take the number of channels into account, so we don't end up calculating
a buffer size that only contains a partial number of audio frames.
Also, when going from output size to input size, round down rather than
up, so as to calculate the minimum number of samples that *might* yield
a buffer of the intended destination size.
Fixes: #580470 and #580952
When videorate duplicates a buffer with a DISCONT flag, it copies the discont on
the first pushed buffer but fails to clear it for subsequent buffers. This
causes theoraenc!oggmux and possibly other elements to consider this a discont
stream.
Fix videorate to produce discont as the first buffer and after a flushing seek.
Fixes#580271.
The 2s limit is way too small for a lot of files (which have an interleave
in time of between 3 and 5s). Instead, leave it to the initial 5s value
and reduce the other limits (allowing us to stay memory-efficient).
First check the pad caps if they are raw before setting the raw_decoding_mode to
TRUE. Fixes playback of transport streams and other streams that require large
queues.
Fixes#579734
Adds a new property in multifdsink, resend-streamheader.
If this property is false, the multifdsink will not send the streamheader if
there's already one set for a particular client.
There are some formats in which every stream needs to start with a certain
blob, but you can't inject this blob at leisure. If the producer wants to
change the blob in question and sets in as the streamheader on the outgoing
buffers' caps, new clients of multifdsink will get the new streamheader, but
old clients will break, because they'll see the blob in the middle of the
stream.
The property is true by default, so existing code will not see any difference.
Fixes#578118.
Add a property to disable listening to client writes. This property is usefull
when other code will deal with reading from the client socket.
API: GstMultiFdSink::handle-read property
Clear the target of our ghostpads before we remove the pad from the element.
This to make sure that the internal pad is not left linked to whatever pad we
were ghosted to. This should only be a problem when we leak the ghostpads.
Also release our subpicture pads.
Fixes#577288.
Raw decoding mode removes almost all buffering in video and audio queues
when a source providing already decoded video/audio is detected, on the
possibly bogus assumption that such a source should provide sufficient
internal queueing. Fixes playback on some DVDs, and improves it
on all.
If one side has a preference for a particular sample rate or set of sample rates, we
should honour this in the caps we advertise and transform to and from, so that elements
actually know about the other side's sample rate preference and can negotiate to it
if supported. Also add unit test for this.
This prevents valgrind warnings when accessing the "x" parts
of xRGB and friends in other elements that handle (and can handle)
xRGB like ARGB (for example videoscale).
When reusing playbin with visualisations, reset the async property on the video
sink because some sinks might dynamically recreate their sinks.
Fixes#576188
When we have the textpad configured, enable and disable the subtitles by setting
the silent flag on the overlay element instead of trying to remove elements.
See #576187
Updated the examples in the README to actually work. Add them to api docs. Tests
the api-docs and fix the section names to make the docs actualy show up.
The example for "tcpserversrc" needs review (might be an element bug).
Link after doing the state change and unlink before shutting down. Makes the
window for causing races in toggling the visualisations smaller.
See #576187.
Remove the group GCond that we used for waiting for groups to finish because we
use pad blocking on the selectors and counters instead for waiting for the
groups to complete.
remove the obsolete about_to_finish variable set while emiting the
about-to-finish signal and fix some old comments.
We don't need to take the playbin lock when querying the uridecodebin.
When we make a group connected to a demuxer, keep an extra dynamic refcount for
the group which is only decremented when no_more_pads or a multiqueue overrun is
detected. This way we avoid a race between exposing the group while more dynamic
refs are added from new pads.
Fixes#575588.
Sync the state of the newly added chains to the state of the parent sink element
to avoid lost async-start messages. Fixes cdda:// async-done message storm.
When streams are not selected in the selector, return NOT_LINKED so that
upstream elements can skip decoding. Only do this for audio and video pads
because for text streams the overhead is smaller and they could come from
external files.
Set the custom sink async=FALSE to not make it participate in preroll because we
are dealing with sparse streams.
Try to set sync=TRUE on the custom text sink.
Release the shutdown lock when we wait for other groups to complete or else we
have a deadlock when the other group completes and tries to grab the shutdown
lock.
Fixes#575550.
The flac frame header typefinder overstates the likelihood of a match, leading
to false positives with e.g. aac streams and PDF files. Reduce probabilty
returned from LIKELY to POSSIBLE for the frame header matchin code.
Fixes#574939.
Detect more variations and also bail out in more cases where the values
don't make sense. Furthermore, add width/height and bpp to the caps,
because we can.
Add property to playbin2 to configure a custom sink that receives the raw
subtitle buffers instead of using a textoverlay.
Improve the property finding code to make it more usable.
Use property find code to find async properties in custom sinks that are bins.
Improve text overlay code to gracefully handle missing elements.
Use scan context for initial peek as well. Peek 6 bytes in the initial
peek rather than 5 bytes, to match the length of the memcmp we're doing
on that data later. Return immediately when we found caps from looking
at the beginning of the data - no point in continuing to scan the next
64kB for something matching a frame header.
Disconnect the notify::caps signal in our callback (it'll be re-added
if we're not, in fact, finished getting complete caps). Ensures that
caps changes mid-stream (e.g. from an mp3 that changes from
stereo->mono mid-file) don't cause us to try to add a new pad.
Make it possible to request a flushing pad from the playsink. We can eventually
use these flushing pads to quickly terminate the dataflow when we are shutting
down.
Release the group lock while we perform the state changes on the uridecodebins
because that might trigger callbacks that we need to handle with the group lock
taken. Avoids a possible deadly embrace in some id3/flac files.
Fixes#567396.
When setting the quality/filter-length while PLAYING the
resampling context will be destroyed and created again in
some cases, which will cause crashes in the transform function
if it's called at that time.
Rather than only checking for volume property on the audio sink
directly, recursively look for it on sinks within it (if it's a bin).
Allows use of sink-as-volume-control where the application has supplied
an audio-sink bin that includes a real audio sink internally.
Don't keep extra references to volume and mute elements; we don't need
to do so.
Ensure we unref pads that we have references to, and release request
pads.
Because core now supports typefindfactories without a typefind function we can
register a factory fo GSM that will --if all else fails-- assume the file is a
GSM file based on the registered extension.
Fixes#566661.
We can use gst_element_link_pads() instead of the more generic
gst_element_link() function because we know the pads. This saves some cycles
because the more generic function needs to search for possible compatible caps
etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(gst_play_bin_set_uri), (gst_play_bin_set_suburi),
(no_more_pads_cb), (drained_cb), (group_set_locked_state_unlocked),
(activate_group), (deactivate_group), (groups_set_locked_state),
(gst_play_bin_change_state):
Fix some comments and docs.
Post an error message when we fail to link the selector to the sink.
Remove pushing of EOS, this seems unneeded.
Lock the state of deactivated groups so that they don't accidentally
reactivate when the playbin2 state changes.
Reuse uridecodebins.
Unlock and relock state of groups when playbin goes to NULL.
Fixes#566654.
Fixes#566341.
* gst/playback/gsturidecodebin.c: (pad_removed_cb), (type_found):
Only do something in the pad removed callback when we are dealing with
our sourcepads because the sinkpads don't have a ghostpad.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (notify_source_cb), (activate_group):
Disconnect signal handlers before destroying a previous decodebin so
that we don't end up causing deadlocks. Fixes#566586.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_class_init), (gst_audio_test_src_init),
(gst_audio_test_src_check_get_range),
(gst_audio_test_src_set_property),
(gst_audio_test_src_get_property):
* gst/audiotestsrc/gstaudiotestsrc.h:
Add property to control pull/push based scheduling.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (no_more_pads_cb):
Add some debug info.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gst_play_sink_reconfigure), (gst_play_sink_request_pad),
(gst_play_sink_release_pad):
Add some more debug info.
Reconfigure the audio chain when we switch between raw and encoded audio
in gapless playback.
Original commit message from CVS:
* gst/adder/Makefile.am:
* gst/adder/gstadder.c:
Cleanup variable names to make the adder-loop easier to understand.
Also try to use liboil to spee it up, but ifdef it out as it does not
make any change for me (Intel pentim M (sse,sse2) please try on other
systems).
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
* gst/tcp/gsttcpclientsink.c:
* gst/tcp/gsttcpclientsrc.c:
* gst/tcp/gsttcpserversrc.c:
Add minimal docs to make the remaining tcp elements show up.
Fixes#564139.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_finalize):
Free the factory array when finalizing.
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_base_init):
Use a GstStaticPadTemplate since the src pad caps are fixed.
Original commit message from CVS:
* gst/subparse/samiparse.c: (sami_context_push_state),
(sami_context_pop_state), (start_sami_element), (end_sami_element):
Some versions of libxml seem to be very picky as to strict formatting
of the input and never 'close' the final </body> tag.
In order to fix that bad behaviour, we trigger the flushing of
remaining data on both </body> and </sami>.
Fixes#557365
Original commit message from CVS:
Patch by: Guillaume Emont <guillaume at fluendo dot com>
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinders for MS Word files and OS X .DS_Store files to
prevent them to be recognized as MPEG files. Fixes bug #564098.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain),
(gst_play_sink_reconfigure):
Add some more debug info.
Fix linking of just an encoded sink.
Handle failure to create a sink chain more gracefully than crashing.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (pad_added_cb):
Error out with a missing-plugin error when the input-selector was not
found.
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Indentation.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gst_play_sink_dispose), (gst_play_sink_finalize), (try_element),
(gen_video_chain), (gen_audio_chain), (gst_play_sink_reconfigure),
(gst_play_sink_send_event), (gst_play_sink_change_state):
Use G_DEFINE_TYPE.
Try to set the selected sink to READY before using it. This will allow
for detection of incompatible formats sooner.
Don't cause a fatal error when conversion elements are missing but post
a missing-element message and a warning instead because things might
still link and run fine.
Simplyfy the construction of audio and video sink chains.
Original commit message from CVS:
Patch by: Luis Menina <liberforce at freeside dot fr>
* gst-libs/gst/floatcast/floatcast.h:
* gst/typefind/gsttypefindfunctions.c:
Include glib.h instead of a specific GLib header. Including single
GLib headers is deprecated. Fixes bug #563904.
Original commit message from CVS:
* gst/volume/gstvolume.c: (gst_volume_class_init),
(volume_before_transform), (volume_transform_ip):
Use new basetransform vmethod to reconfigure the dynamic properties and
any pending volume/mute changes. Fixes#563508.
Original commit message from CVS:
* gst/playback/gstdecodebin.c:
* gst/playback/gstdecodebin2.c:
Add basic docs to decodebin and link to decodebin from decodebin2.
Original commit message from CVS:
* docs/plugins/gst-plugins-base-plugins.args:
* docs/plugins/gst-plugins-base-plugins.hierarchy:
* docs/plugins/gst-plugins-base-plugins.interfaces:
* docs/plugins/gst-plugins-base-plugins.prerequisites:
* docs/plugins/inspect/plugin-videorate.xml:
* gst/speexresample/gstspeexresample.c:
Update documentation of speexresample for the new element name.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (plugin_init):
Update the debug category from speex_resample to audioresample.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
Add notification of current stream. Add ability to configure buffer
sizes.
* gst/playback/gsturidecodebin.c:
Add ability to configure buffer sizes for streaming mode.
Bug #561734.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain):
Don't post an error when we can't configure the volume but post a
warning instead. Fixes#561780.
Original commit message from CVS:
Patch by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
* gst/videotestsrc/gstvideotestsrc.c:
* gst/videotestsrc/gstvideotestsrc.h:
* gst/videotestsrc/videotestsrc.c:
* gst/videotestsrc/videotestsrc.h:
Add a zone plate pattern generator based on BBC R&D Report
1978/23 (yeah *that* 1978). Try 'videotestsrc pattern=zone-plate
kx2=20 ky2=20 kt=1'.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_class_init), (gst_speex_resample_set_property),
(gst_speex_resample_get_property):
Add a "filter-length" property that maps to the quality values
for compatibilty with audioresample.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
If the top-level type of the stream is plain text, don't try to decode
it, matching behaviour of decodebin.
* gst/playback/gstplaysink.c:
If we fail to generate a text chain (e.g. due to missing optional
plugins), don't crash.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
* gst/videotestsrc/gstvideotestsrc.h:
* gst/videotestsrc/videotestsrc.c:
* gst/videotestsrc/videotestsrc.h:
Add "colorspec" property, specifying whether to generate BT.601
or BT.709 video. This only affects YCbCr values, not RGB, since
if you're generating a 709 test pattern, presumably you want
709 RGB primaries, not 601. Also add "smpte75" pattern, which
uses 75% colors instead of 100%, since this is often more useful
for testing (and also follows the SMPTE EG-1 guideline).
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
Guard against a NULL dereference I somehow encountered -
with a FLUSH_STOP arriving either before basetransform _start(),
or after _stop().
* gst/typefind/gsttypefindfunctions.c:
Make sure we never jump backwards when typefinding corrupt mov files.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (jp2_type_find),
(plugin_init):
Improve typefinding of ISO JPEG2000 mime types.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (deactivate_group):
don't try to unlink the selector sinkpad when we don't have it yet. This
can happen if an error occured before the group was complete.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (activate_group):
Catch state change errors and stop from the uridecodebin elements
instead of trying to continue in vain.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Don't try to do crazy things when we only have a text pad without a
video pad. Fixes#559478.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_update_real_volume),
(gst_volume_set_volume), (gst_volume_get_volume),
(gst_volume_set_mute), (gst_volume_init), (volume_setup),
(volume_transform_ip), (volume_update_mute),
(volume_update_volume), (volume_get_property):
* gst/volume/gstvolume.h:
Keep negotiated state in a separate variable.
Protect the volume and mute properties with the object lock.
Protect modifying the transform with the transform lock.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps):
Only convert caps to string when debug is enabled.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_convert_buffer):
Add TODO at the top of the file for enabling SSE/ARM specific
optimizations and choosing the fastest implementation at runtime.
Add g_assert_not_reached() at two places that should really never
be reached.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_check_discont):
Fix format string and arguments.
* gst/speexresample/resample_sse.h:
Add missing file.
Original commit message from CVS:
* gst/speexresample/Makefile.am:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_base_init), (gst_speex_resample_get_funcs),
(gst_speex_resample_convert_buffer), (_benchmark_int_float),
(_benchmark_int_int), (_benchmark_integer_resampling),
(plugin_init):
* gst/speexresample/gstspeexresample.h:
* gst/speexresample/resample.c:
* gst/speexresample/speex_resampler_double.c:
* gst/speexresample/speex_resampler_float.c:
* gst/speexresample/speex_resampler_int.c:
* gst/speexresample/speex_resampler_wrapper.h:
Add missing headers to Makefile.am.
Update copyright, years and my mail address.
Benchmark the integer resampling implementation against the
float implementation and use the faster one for 8/16 bit integer
input. On most recent systems the floating point version is faster.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_convert_buffer):
The length for the buffer conversion function is the number of
audio frames, i.e. we need to multiply it by the number of channels
to get the number of values. Also spotted by the unit test after
running in valgrind.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (element_message_cb),
(eos_message_cb), (test_pipeline), (GST_START_TEST),
(speexresample_suite):
Add pipeline unit tests for testing all supported formats with
up/downsampling and different in/outrates.
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_process):
* gst/speexresample/speex_resampler_wrapper.h:
Fix bugs identified by the testsuite.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_stop),
(gst_speex_resample_get_funcs),
(gst_speex_resample_transform_size),
(gst_speex_resample_convert_buffer),
(gst_speex_resample_push_drain), (gst_speex_resample_process):
* gst/speexresample/gstspeexresample.h:
* gst/speexresample/speex_resampler_wrapper.h:
Add support for int8, int24 and int32 input by converting internally
to/from int16 or double.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_start),
(gst_speex_resample_get_unit_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_resample_check_discont), (gst_speex_resample_process),
(gst_speex_resample_transform):
* gst/speexresample/gstspeexresample.h:
Rewrite timestamp tracking to make it more robust and guarantee
a continous stream.
* tests/check/Makefile.am:
* tests/check/elements/speexresample.c: (setup_speexresample),
(cleanup_speexresample), (fail_unless_perfect_stream),
(test_perfect_stream_instance), (GST_START_TEST),
(test_discont_stream_instance), (live_switch_alloc_only_48000),
(live_switch_get_sink_caps), (live_switch_push),
(speexresample_suite):
Add unit tests for speexresample based on the audioresample unit tests.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_class_init), (gst_speex_resample_fixate_caps),
(gst_speex_resample_process):
Fixate to the nearest supported rate instead of the first one.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(gst_audioresample_class_init), (audioresample_fixate_caps):
Fixate the rate to the nearest supported rate instead of
the first one. Fixes bug #549510.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mxf_type_find):
Improve MXF typefinding a bit by searching for a header partition
pack instead of just a general partition pack and checking more
bytes for valid values.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_init):
Set the default blocksize to -1 because we will then use the configured
samplesperbuffer to create our output buffer.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (flac_type_find):
Don't forget to advance the offset of what we're matching against, else
we end up in a forever loop.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (gst_subparse_type_find):
Improve typefinding a bit. If we don't have a Unicode charset
try GST_SUBTITLE_ENCODING and otherwise try ISO-8859-15.
Original commit message from CVS:
* gst/subparse/Makefile.am:
* gst/subparse/gstsubparse.c: (gst_sub_parse_dispose),
(gst_sub_parse_class_init), (gst_sub_parse_init),
(gst_convert_to_utf8), (detect_encoding), (convert_encoding),
(get_next_line), (gst_sub_parse_data_format_autodetect),
(feed_textbuf), (handle_buffer), (gst_sub_parse_change_state),
(gst_subparse_type_find):
* gst/subparse/gstsubparse.h:
Add support for UTF16/UTF32 subtitles as long as the first bytes of
the first buffer contain the BOM. This also adds support for other
encodings that allow NUL bytes via the encoding property.
Fixes bugs #552237 and #456788.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (flac_type_find):
For looking at the 4th byte we have to get 4 bytes of course
and not 3.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (flac_type_find):
Improve FLAC-without-headers typefinding by looking at most of the
frame header and checking if invalid values are used. Should prevent
quite some false positives compared to the old version which only
check if the first 14 bits are set.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect), (handle_buffer),
(gst_sub_parse_change_state):
* gst/subparse/gstsubparse.h:
* tests/check/elements/subparse.c: (GST_START_TEST):
Add support for subtitle files with UTF-8 BOM at the beginning
by simple stripping it from the first line before passing it
to any parsing code. Fixes bug #555257 and playback of files
created by Gnome Subtitles.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_class_init), (gst_audio_test_src_init),
(gst_audio_test_src_src_fixate), (gst_audio_test_src_setcaps),
(gst_audio_test_src_start), (gst_audio_test_src_stop),
(gst_audio_test_src_do_seek), (gst_audio_test_src_check_get_range),
(gst_audio_test_src_create):
* gst/audiotestsrc/gstaudiotestsrc.h:
Define the default property values in the usual place.
Implement start/stop to reset values correctly.
Calculate the sample size only once when we negotiate.
Rename some values to make more sense.
Keep track of our byte range.
Add support for pull based scheduling. Disabled for now until we have
the whole stack working.
Set the BUFFER_OFFSET correctly.
Original commit message from CVS:
Based on a patch by: xavierb at gmail dot com
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect):
* tests/check/elements/subparse.c: (GST_START_TEST):
Make the detection of the used subtitle a bit less strict
for srt subtitles. Fixes bug #555607.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_pad_activate):
Remove bogus assert, the decodepad could have been created inside an
already existing group.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (expose_pad): Fix typo: unset
target instead of setting it.
(gst_decode_pad_activate, gst_decode_pad_unblock): This is now the
API for a decode pad. The bugfix is that we set the group in
activate(), not when the pad was created because it might be NULL
then.
(gst_decode_group_control_source_pad, gst_decode_group_expose):
Update to use the API.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (struct _GstDecodePad): Change to
be a subclass of GstGhostPad.
(analyze_new_pad): So, when emitting the signals that determine
how we do autoplugging, already create the ghost pad and use it as
the pad in the signal arguments. This allows applications to make
a connection between the pad passed in e.g. autoplug-continue, and
the pad passed in new-decoded-pad.
(connect_pad, expose_pad): Update to receive the ghosted decode
pad in the args, retargetting it as necessary if we have to plug
the target pad through a multiqueue.
(gst_decode_group_control_source_pad): Adapt to receive an
already-ghosted pad that just needs activation, blocking, and
drain notification.
(sort_end_pads): Adapt for decode pads actually being pads.
(gst_decode_group_expose): Adapt for decode pads actually being
pads. Rewrite the decode pad names so they appear in order. Adds a
new error case if we couldn't set the name.
(gst_decode_group_free, gst_decode_group_hide): Adapt cleanup
logic.
(gst_decode_pad_set_blocked, gst_decode_pad_add_drained_check):
New API for the decode pad, needed because we shouldn't do these
things inside gst_decode_pad_new(), but after.
(gst_decode_pad_new): Change to actually make the real pad, and
delay the blocking/drainage bits.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (audio_convert_convert):
Prevent overflows with big buffer when calculating the size of
the intermediate buffer by using gst_util_uint64_scale() instead of
plain arithmetics. Fixes bug #552801.
Original commit message from CVS:
* gst-libs/gst/pbutils/descriptions.c:
* gst/typefind/gsttypefindfunctions.c:
Recognise Kate subtitle streams (#550582).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Typefind video/mj2 and image/jp2 ISO JPEG2000 mime types.
Fixes#550638.
Original commit message from CVS:
* configure.ac:
* gst/subparse/Makefile.am:
* gst/subparse/gstsubparse.c:
* gst/subparse/samiparse.c:
* tests/check/elements/subparse.c:
Rework last change, so that we build subparse, but just disable the
sami parse functionality, if we're configured to not use xml. In the
tests only the sami test is disabled now.
Original commit message from CVS:
Patch by: Jonathan Matthew <notverysmart gmail com>
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinder for PDF documents (which is nice to have, since it's a
common format, but also helps prevent false positives). Fixes#549814.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (selector_blocked), (pad_added_cb),
(no_more_pads_cb):
Fix nasty race where multiple decodebins could start pushing data before
we manage to configure the sinks, resulting in not-linked errors in
typical RTSP streaming cases.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: DV typefinding. Remove
check for a bit that is 0 in IEC 61384, but not SMPTE 314M.
Fixes#548065.
Original commit message from CVS:
2008-08-04 Andy Wingo <wingo@pobox.com>
* gst/audiotestsrc/gstaudiotestsrc.c: Very crucial and important
documentation fix.
Original commit message from CVS:
* gst/adder/gstadder.c:
Cleanup lots of empty lines that came from gst-indent going havoc
before I added the INDENT_ON/OFF marker some time agao.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c: (gst_video_test_src_getcaps),
(gst_video_test_src_create):
Discard buffers of the wrong size after renegotiation, this is perfectly
possible with things like capsfilter that could suggest caps changes
upstream without knowing the size of the buffer.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Fix property doc markup (its not a signal).
* sys/xvimage/xvimagesink.c:
Add since tag for new proeprties (also add sice tags fro the last two
other additions).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (celt_type_find),
(plugin_init):
Add simple typefinder for the CELT codec (www.celt-codec.org).
Original commit message from CVS:
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioquantize.c:
(gst_audio_quantize_setup_dither),
(gst_audio_quantize_free_dither):
* gst/audioconvert/gstfastrandom.h:
Implement a linear congruential generator as pseudo random number
generator for the dither noise. This is about 2 times faster than
using GLib's mersenne twister. Also this uses only integer math for
generating integers while GLib internally uses floating point math.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
* gst/audiotestsrc/gstaudiotestsrc.h:
Add 'ticks', a 1/30 second sine wave pulse every second.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c:
* gst/playback/gststreamselector.c:
First stab at integrating DVD subpicture overlay into
playbin. Successfully plugs and plays, but the queues need
shrinking - 3 seconds of video is too much buffering.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
And ref the pad before returning it again when linking to the queue
failed. Otherwise we will unref the pad twice later and things break.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
If linking the raw pad with a queue fails, try it without a queue
instead of failing completely. This should never happen.
Original commit message from CVS:
Patch by: Evgeniy Stepanov <eugeni dot stepanov at gmail dot com>
* gst/playback/gstdecodebin.c: (add_raw_queue), (close_pad_link):
Add a queue after a demuxer if the demuxer outputs raw data. This was
done before only for non-raw data but is required in this case too.
Fixes bug #540215.
decodebin2 doesn't have this issue because all streams of a group
go through multiqueue.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_unit_size):
Only set/get on the PAL8 format, ffmpegcolorspace doesn't support
it on other formats. Also adjust the unit size only for that format
to not include the palette. Fixes bug #540497.
Original commit message from CVS:
* gst/playback/gstplay-marshal.list:
* gst/playback/gstplaybin2.c:
Add get-video-pad, get-audio-pad, get-text-pad action signals to
playbin2. This allows the user to get to the selector's sinkpads, and
thus inspect a range of things - caps, tags, etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
* gst/playback/gstplaysink.c:
Fix a whole bunch of typos in comments and log statements.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
Ensure decodebin2 emits 'drained' signal once, and only once, when all
pads are drained.
Original commit message from CVS:
apparently it's an error to specify nc -l -p 3000 - though the short usage
does not make it very clear that you can drop the host arg with -l
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_get_property),
(notify_source), (activate_group):
Implement the source property, emit notify when it changes in the
underlying uridecodebin.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gdp/gstgdppay.c: (gst_gdp_pay_reset):
Fix a buffer memleak and remove a confusing and wrong debug output.
Fixes bug #538663.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Disconnect signals from decodebins we created before we remove it from
playbin, to avoid crashes if the decodebin is eventually disposed after
the playbin itself (possible if the app takes a reference on the
decodebin).
Fixes#536521.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (aac_type_find),
(mp3_type_find), (musepack_type_find), (MULTIPART_MAX_HEADER_SIZE),
(mpeg_sys_type_find), (mpeg_ts_type_find), (mpeg4_video_type_find),
(h264_video_type_find), (mpeg_video_stream_type_find),
(dv_type_find), (mmsh_type_find):
Bunch of small clean-ups: use gst_type_find_suggest_simple(); don't
copy caps for no good reason (this may be desirable to make it easier
to detect leaks, but then it should probably be done for all caps
in the typefinder somewhere).
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gdp/gstgdppay.c: (gst_gdp_pay_reset_streamheader):
Don't set caps on the buffers that contain a copy of the buffer
including the caps of them resulting in an always increasing refcount
of the caps and insanely large caps. Instead include a buffer without
caps in the new caps. Fixes bug #536475.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_transform_caps):
Transform a given PAR to a range on the struct with the generic
height/width instead of the struct with the possibly restricted
height/width.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_transform_caps):
Prefer the given format if it contains something stricter than [1,MAX]
for height or width and only put a structure that requires rescaling
as second. This makes it possible to use videoscale in pipelines where
the source can actually produce the wanted height/width but usually
selects a different one from the requested.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration),
(gst_adder_query_latency):
When using gst_element_iterate_pads() one has to unref every pad
after usage.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(structure_has_fixed_channel_positions),
(gst_audio_convert_transform_caps):
Allow up to 11 positioned channels now that audioconvert can handle
this but add no default positions for > 8 channels.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some unit tests for the above change: Test conversion of
11 positioned channels to stereo and the other way around, test
conversion of 15 unpositioned channels in different ways.
Original commit message from CVS:
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_one_other):
If mixing left or right to center (or the other way around) only take
the complete value if we don't already have the original position in
the source.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Allow rear center together with rear left/right and other previously
conflicting channel positions. The reason why they weren't allowed
was the channel mixing implementation in audioconvert.
Also take this into account when fixing channel layouts.
Allow setting channel positions for 1/2 channels when using
gst_audio_set_structure_channel_position().
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_compatible), (gst_channel_mix_detect_pos),
(gst_channel_mix_fill_one_other), (gst_channel_mix_fill_others),
(gst_channel_mix_fill_special), (gst_channel_mix_fill_matrix):
Major rewrite of the channel mixing.
We now allow previously conflicting channel positions to appear
together (rear center and rear left/right for example).
Fixes bug #533817.
Rework the way channels are mixed together to take more possible
channel positions into account, properly mix from/to side channels
and don't assume that either center, left&right or nothing of a
specific position is available anymore.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Adjust unit tests with non-standard 1/2 channel layouts to the more
correct new behaviour.
Add a unit test for 5.1->Stereo downmixing.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/videorate/gstvideorate.c: (gst_video_rate_reset),
(gst_video_rate_flush_prev), (gst_video_rate_event),
(gst_video_rate_chain):
* gst/videorate/gstvideorate.h:
React (more) to NEWSEGMENT
Small adjustment in timestamp calculation to prevent mismatches
Fixes#435633.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration):
Correctly resync the iterator if gst_iterator_next() returns
GST_ITERATOR_RESYNC.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_group_control_source_pad), (gst_decode_group_expose):
Check for NULL cases and log them, creating ghostpads can, for example,
fail when the pad returns wrong caps.
* gst/playback/gstplaybin2.c: (perform_eos):
When pushing out the EOS event, collect the return value and warn when
something failed.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (DEFAULT_PROP_METHOD):
Change default scaling method from nearest-neighbour to bilinear.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (parser_state_init),
(gst_sub_parse_format_autodetect), (handle_buffer):
* gst/subparse/gstsubparse.h:
* tests/check/elements/subparse.c: (test_tmplayer_style3b):
Limit duration to a maximum of five seconds for tmplayer format where
we can guess the duration only from the timestamp of the next line of
text. We don't want to show a text for eternities just because nothing
else is being said for a while.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/playback/gstdecodebin.c: (remove_fakesink):
Lock the fakesink before setting the state to NULL and removing it from
the bin so that a concurrent state change cannot interfere.
Fixes#534331.
Original commit message from CVS:
2008-05-21 Julien Moutte <julien@fluendo.com>
* gst/tcp/gstmultifdsink.c: (setup_dscp_client): Use IPPROTO_IP
instead of SOL_IP, works on more platforms.
* gst/typefind/gsttypefindfunctions.c: (aac_type_find): Fix printf
arguments.
Original commit message from CVS:
* ext/vorbis/vorbisdec.c:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_transform):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_show_frame):
Some debug and comment fixes.
* tests/examples/dynamic/addstream.c: (main):
Fix , to ;
Original commit message from CVS:
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_fill_others):
Add support for mixing GST_AUDIO_CHANNEL_POSITION_SIDE_* from/to
other channel positions when source has SIDE channels and dest doesn't
or the other way around.
Original commit message from CVS:
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_normalize):
Prevent division by zero if the channel mix matrix contains only
zeroes.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gdp/gstgdppay.c: (gst_gdp_pay_chain):
Close a buffer memory leak. Fixes bug #534071.
Original commit message from CVS:
* gst/adder/gstadder.c:
Adder also doesn't support audio/x-raw-int with width!=depth so don't
claim this on the pad template caps.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_fixate_channels):
Passthrough the channel positions if the number of output channels is
the same as the number of input channels, the input had a channel
layout and downstream requests no special one. We did this already for
> 2 channels but now it's also done for 1 channel. Fixes bug #533617.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_fixate_channels):
Correctly set the default channel positions when converting to 8
channels.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (aac_type_find):
Use data scan helper in aac typefinder and stop scanning
for headers when we've found a type. Also fix potential invalid
memory access when calculating the frame length.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (data_scan_ctx_ensure_data),
(mpeg_sys_is_valid_pack):
Don't modify scan context when we return FALSE in ensure_data, so
it's possible to continue scanning, and we don't end up with a NULL
data pointer and a positive size, which might bite us the next time
we're called. Small constification.
Original commit message from CVS:
* gst/adder/gstadder.c:
Adder doesn't support 24 bit samples so don't claim it supports them
in the pad template caps.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c: (gst_audioresample_init):
Revert previous change which made basetransform handle buffer_alloc
and which breaks things badly in the non-passthrough case since it
returned buffers with a different (ie. sometimes smaller) size than
the size requested.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_class_init):
Correctly declare the supported endianness on the pad templates
and check for correct endianness in the set caps function. Adder
only supports native endianness.
Also use gst_element_class_set_details_simple().
Original commit message from CVS:
Patch by: Hannes Bistry <hannesb at gmx dot de>
* gst/tcp/gsttcpclientsrc.c: (gst_tcp_client_src_start):
* gst/tcp/gsttcpserversink.c:
(gst_tcp_server_sink_handle_server_read),
(gst_tcp_server_sink_handle_wait), (gst_tcp_server_sink_init_send):
Fix regression in clientsrc because we did not add the fd to the poll
set anymore. Fixes#532364.
Do some cleanups here and there.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_class_init):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init):
* gst/playback/gstplay-marshal.list:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_class_init):
Use correct marshallers. GstCaps are a boxed type and no GObject
subclass.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (h264_video_type_find):
Don't do lots of 4-byte peeks, but use the 'new' data scan helper
for this instead; don't check if we've found enough markers after
each and every step, it's enough to do that only if we've actually
found a new marker.
Embed a G_UNLIKELY into the IS_MPEG_HEADER macro.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c:
(DATA_SCAN_CTX_CHUNK_SIZE), (DataScanCtx), (data_scan_ctx_advance),
(data_scan_ctx_ensure_data), (GST_MPEGVID_TYPEFIND_TRY_SYNC),
(mpeg_video_stream_type_find):
Move scan helper thingy to the beginning of the file so we can use
it in other typefind functions. Rename it to something more
generic. Also improve handling of things towards the end of the
typefind data: peek as much as we can if we know the size of the
data, rather than just min_size.
Original commit message from CVS:
Based on a patch by:
Björn Benderius <bjoern dot benderius at axis dot com>
* gst/ffmpegcolorspace/avcodec.h:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt),
(gst_ffmpegcsp_avpicture_fill):
* gst/ffmpegcolorspace/imgconvert.c: (nv12_to_nv21):
* gst/ffmpegcolorspace/imgconvert_template.h:
Add conversions from/to NV12 and NV21 and conversions between those
two formats. Fixes bug #532166.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (h264_video_type_find):
Abort the h264 typefinding as soon as _peek() doesn't return anything,
which happens for example with files smaller than 128kb.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/audioresample/gstaudioresample.c: (gst_audioresample_init):
Let audioresample use the buffer allocation of basetransform instead
of it's own stuff.
* tests/check/elements/audioresample.c: (alloc_only_48000),
(GST_START_TEST), (audioresample_suite):
Add unit test for the recent basetransform bugfix, where upstream
changes caps to something that can't be passed through anymore.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_transform_ip):
Return NOT_NEGOTIATED if we didn't set a process function yet for some
reason instead of crashing later. Might fix bug #509125.
Original commit message from CVS:
Based on a patch by: Tim-Philipp Müller <tim.muller at collabora co uk>
* gst/audioconvert/audioconvert.c: (audio_convert_prepare_context):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_parse_caps),
(structure_has_fixed_channel_positions),
(gst_audio_convert_transform_caps):
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_fill_matrix):
Add support for more than 8 channels and NONE channel layouts. For
more than 8 channels no channel conversion is supported yet, only
format conversions are supported. Fixes bug #398033.
* tests/check/elements/audioconvert.c: (verify_convert),
(GST_START_TEST), (audioconvert_suite):
Add some unit tests by Tim for checking the NONE channel layouts
and more than 8 channels and add some more unit tests for channel
conversions.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (connect_pad):
When autoplugging fails, set the element back to NULL before
unreffing it.
Original commit message from CVS:
* gst/subparse/samiparse.c: (handle_start_sync),
(end_sami_element), (characters_sami):
Remove trailing, leading and double whitespaces.
Correctly timestamp buffers and output the last buffer too.
* tests/check/elements/subparse.c: (GST_START_TEST),
(subparse_suite):
Add a simple unit test for SAMI parsing.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian dot net>
* gst/subparse/samiparse.c: (handle_start_sync),
(start_sami_element), (end_sami_element), (characters_sami),
(sami_context_reset):
Only output characters inside the "sync" elements. There could be
other elements like "style" that have some content but should
not be printed. Fixes bug #467911.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (set_audio_mute),
(set_active_source):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(playbin_set_audio_mute):
Allow setting -1 as current-audio to mute the current audio stream,
similar to what is done for subtitles. Fixes bug #342294.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (handle_buffer),
(gst_sub_parse_sink_event):
* gst/subparse/tmplayerparse.c: (tmplayer_process_buffer),
(tmplayer_parse_line):
Fix parsing of tmplayer subtitle variant where every single line contains
text and there isn't an empty line after each line to determine the
duration (#530962). Improve EOS handling for tmplayer subtitles a bit by
making sure that we push out the last line of text without a duration if
there's still text left in the buffer at the end.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (feed_textbuf):
Fix detection of discontinuities based on the buffer offset (doesn't work
so well if no buffer offset is set) and also check for the DISCONT buffer
flag. This keeps the parser state from being reset after each buffer in
the unit test.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg_video_stream_type_find):
Further fine-tuning: don't absolutely require sequence or GOP headers
(as introduced in the previous commit), but adjust the typefind
probabilities returned accordingly if we don't see them. Also make sure
picture header and first slice are somewhat close to each other (which
is not perfect but still better than requiring a fixed offset or having
no limit at all).
Original commit message from CVS:
* gst/playback/test4.c:
* gst/playback/test5.c:
* gst/playback/test6.c:
* gst/playback/test7.c:
Also include config.h when relying on defines from it. Fixes the
build. Its been a please to serve :)
Original commit message from CVS:
* gst/videotestsrc/videotestsrc.c (paint_setup_NV12),
(paint_setup_NV21), (paint_hline_NV12_NV21):
Add support for NV12 and NV21 in videotestsrc
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c:
* gst/videoscale/vs_4tap.c: (vs_image_scale_4tap_Y):
* gst/videoscale/vs_image.c: (vs_image_scale_nearest_RGBA),
(vs_image_scale_linear_RGBA), (vs_image_scale_nearest_RGB),
(vs_image_scale_linear_RGB), (vs_image_scale_nearest_YUYV),
(vs_image_scale_linear_YUYV), (vs_image_scale_nearest_UYVY),
(vs_image_scale_linear_UYVY), (vs_image_scale_nearest_Y),
(vs_image_scale_linear_Y), (vs_image_scale_nearest_RGB565),
(vs_image_scale_linear_RGB565), (vs_image_scale_nearest_RGB555),
(vs_image_scale_linear_RGB555):
Support 1x1 images as input and output as for example the BBC HQ new
streams have 1x1 GIFs in the playlists for some reason.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (free_pad_probe_for_element),
(try_to_link_1):
If we can't activate one of the decoders we plugged in (such as,
say, musepackdec) for some reason (it might not support push mode,
for example), remove any pad probes that close_pad_link() might
have set up. This makes sure we later don't try to remove a probe
for a pad that doesn't exist any longer, and avoids nast warnings
and probably other things too.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c:
(mpeg_video_stream_ctx_ensure_data), (mpeg_video_stream_type_find),
(plugin_init):
Rework mpeg video stream typefinding a bit more: make sure sequence,
GOP, picture and slice headers appear in the order they should and
that we've in fact at least had one of each; fix picture header
detection; decouple picture and slice header check - don't assume
they're at a fixed offset, there may be extra data in between. Also,
announce varying degrees of probability depending on what we found
exactly (multiple pictures, at least one picture, just sequence and
GOP headers). Finally, in _ensure_data(), take into account that we
might be typefinding smaller amounts of data, such as the first
buffer of a stream, so fall back to the minimum size needed as long
as that's available, instead of erroring out if there's less than
2kB of data. Fixes#526173. Conveniently also doesn't recognise the
fuzzed file from #399342 as valid.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (MpegVideoStreamCtx),
(mpeg_video_stream_ctx_advance), (mpeg_video_stream_ctx_ensure_data),
(mpeg_video_stream_type_find):
Refactor a bit: use context structure to track parsing offset and size of
available data and make the code a bit clearer. Fixes bad memory access
in #356937.
Original commit message from CVS:
* gst/playback/test4.c:
* gst/playback/test5.c:
* gst/playback/test6.c:
* gst/tcp/gstmultifdsink.c:
Include stdlib.h and unistd.h only if the appropriate HAVE_*_H macro
is defined.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (musepack_type_find),
(plugin_init):
Add "mpp" and "mp+" as possible extensions for MusePack files.
Add typefinding for MusePack StreamVersion 8 files and include the
stream version in the caps.
Original commit message from CVS:
* docs/design/draft-keyframe-force.txt:
Fix typo.
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_handle_src_query):
Set buffering mode in the messages.
Set buffering percent in the query.
* tests/examples/seek/seek.c: (update_fill), (msg_state_changed),
(do_stream_buffering), (do_download_buffering), (msg_buffering):
Do some more fancy things based on the buffering method in use.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_close_temp_location_file), (gst_queue_handle_src_query),
(gst_queue_src_checkgetrange_function):
Include extra buffering stats in the buffering message.
Implement BUFFERING query.
* gst/playback/gsturidecodebin.c: (do_async_start),
(do_async_done), (type_found), (setup_streaming), (setup_source),
(gst_uri_decode_bin_change_state):
Only add decodebin2 when the type is found in streaming mode.
Make uridecodebin async to PAUSED even when we don't have decodebin2
added yet.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
* gst/playback/gstplayback.c: (plugin_init):
* gst/volume/gstvolume.c: (plugin_init):
Work around missing bits of thread-safety on older GLibs some
more to avoid assertions when starting up multiple playbin
objects concurrently (see #512382).
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_init), (gst_decode_bin_dispose),
(gst_decode_bin_set_sink_caps), (gst_decode_bin_get_sink_caps),
(gst_decode_bin_set_property), (gst_decode_bin_get_property),
(analyze_new_pad), (connect_pad), (expose_pad),
(gst_decode_group_new), (gst_decode_group_control_demuxer_pad),
(gst_decode_group_expose), (gst_decode_group_free),
(do_async_start), (do_async_done), (gst_decode_bin_change_state):
Remove fakesink hack, we can now implement this more elegantly.
Added property to bypass typefinding.
Removed underrun callback and demuxer pad probe, we now use the srcpad
probe to expose groups.
API::sink-caps property
* gst/playback/gstplaybin2.c: (no_more_pads_cb):
Guard against multiple emissions of the no_more_pads signal, which
happens when we are dealing with chained oggs.
* gst/playback/gsturidecodebin.c: (remove_decoders),
(make_decoder), (type_found), (setup_streaming), (source_new_pad),
(setup_source):
For streams, use our own typefind element and plug our queue after it.
We will need this to determine the type of buffering to use for the
queue soon.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_out_rates),
(gst_queue_open_temp_location_file),
(gst_queue_close_temp_location_file), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_set_property):
Update the estimated input data when we push out a buffer.
Add some debug info about the temp file.
Only forward src events when we are not using a temp file.
Don't block the duration query, we need to find something better.
Don't leak the temp filename.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_is_filled):
The queue is never filled when there are no buffers in the queue at all.
Fixes#523993.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(init_group), (free_group), (gst_play_bin_init),
(gst_play_bin_finalize), (gst_play_bin_set_uri),
(gst_play_bin_set_suburi), (gst_play_bin_get_video_tags),
(gst_play_bin_get_audio_tags), (gst_play_bin_get_text_tags),
(gst_play_bin_set_current_video_stream),
(gst_play_bin_set_current_audio_stream),
(gst_play_bin_set_current_text_stream),
(gst_play_bin_set_encoding), (gst_play_bin_set_property),
(gst_play_bin_get_property), (pad_added_cb), (pad_removed_cb),
(no_more_pads_cb), (perform_eos), (autoplug_select_cb),
(activate_group), (deactivate_group), (setup_next_source),
(save_current_group), (gst_play_bin_change_state):
Update some docs.
Add new locks and conds to protect pipeline creation and group
switching.
Implement the sub-uri property.
Keep track of pending uridecodebin creation and configure the output
pipeline after all streams are configured.
Propagate subtitle encoding to the uridecodebins.
Implement getting the video/audio/visualisation elements.
Use input-selector for stream switching.
If we are asked to do visualisation, prefer to autoplug raw sinks
instead of sinks that accept encoded data.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gst_play_sink_init), (gst_play_sink_dispose),
(gst_play_sink_set_video_sink), (gst_play_sink_get_video_sink),
(gst_play_sink_set_audio_sink), (gst_play_sink_get_audio_sink),
(gst_play_sink_vis_unblocked), (gst_play_sink_vis_blocked),
(gst_play_sink_set_vis_plugin), (gst_play_sink_get_vis_plugin),
(gst_play_sink_set_volume), (gst_play_sink_get_volume),
(gst_play_sink_set_mute), (gen_video_chain), (gen_text_chain),
(gen_audio_chain), (gen_vis_chain), (gst_play_sink_reconfigure),
(gst_play_sink_set_font_desc), (gst_play_sink_get_font_desc),
(gst_play_sink_send_event_to_sink), (gst_play_sink_change_state):
* gst/playback/gstplaysink.h:
Add methods to get audio/video/vis elements.
Add methods to set the font description for the overlay.
Remove properties, we're using this element with its methods only.
Add support for subtitles.
Rearrange the locking a bit to not use the object lock for protecting
the pipeline construction.
Try to use the volume and mute property on the sink when its available.
Implement the mute option with volume when the sink does not have a mute
property.
Only add volume element when the sink has no volume property.
Only do visualisations with raw audio pads.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c:
(gst_uri_decode_bin_autoplug_factories),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_encoding),
(gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (no_more_pads_full),
(new_decoded_pad_cb), (gen_source_element), (remove_decoders),
(proxy_autoplug_factories_signal), (make_decoder),
(source_new_pad), (setup_source):
Add a readonly source property and notify.
Add new lock for protecting the construction of the pipeline.
Keep track of the decodebins we plugged.
Correctly proxy the autoplug signal so that it actually continues.
Proxy subtitle-encoding to the decodebins.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose),
(gst_decode_bin_set_caps), (gst_decode_bin_get_caps),
(gst_decode_bin_set_subs_encoding),
(gst_decode_bin_get_subs_encoding),
(gst_decode_bin_autoplug_factories), (connect_pad), (are_raw_caps),
(deactivate_free_recursive):
Protect caps property with the object lock.
Protect encoding property with the object lock.
Keep list of elements we added that have the subtitle-encoding property.
Distribute the subtitle-encoding to all of the elements when it
changes.
Original commit message from CVS:
* gst/volume/gstvolume.c: (gst_volume_interface_supported),
(gst_volume_base_init), (gst_volume_class_init),
(volume_process_double), (volume_process_float),
(volume_transform_ip), (plugin_init):
memset buffers to zero if we get a GAP buffer. We usually see a
buffer as one unit so let's handle it as one and don't care about
volume changes while processing one buffer.
Also clean up some stuff a bit.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_init),
(gst_audio_convert_create_silence_buffer),
(gst_audio_convert_transform):
Make audioconvert GAP-aware by outputting silence buffers when the
input has the GAP flag set. This is up to 8x faster.
Based on a patch by Stefan Kost. Fixes bug #517813.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_process_double):
Use oil_scalarmultiply_f64_ns() for double processing when it's
available at compile time.
Original commit message from CVS:
* gst/playback/gststreamselector.c: (gst_selector_pad_event),
(gst_selector_pad_chain):
* gst/playback/gststreamselector.h:
Revert change that caused regression until a real fix is found.
Fixes#522203.
Original commit message from CVS:
* gst/Makefile.am:
GST_PLUGINS_ALL correctly lists subparse and tcp now, don't distclean
them twice
* win32/common/libgstinterfaces.def:
* win32/common/libgstrtp.def:
Add new API to the defs
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinder for IMelody files, using audio/x-imelody.
See bug #519516.
Original commit message from CVS:
Patch by: José Alburquerque <jaalburqu svn gnome org>
* gst/playback/gstplaybin2.c:
Make the function signature of the _get_*_tags() functions match
the signature of the vfuncs they implement, ie. return a
GstTagList rather than a GstStructure, which is more correct,
even if one is typedef'ed to the other (#518940).
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_set_property):
Enable vis setting.
* gst/playback/gstplaysink.c: (gst_play_sink_init),
(gst_play_sink_dispose), (gst_play_sink_vis_unblocked),
(gst_play_sink_vis_blocked), (gst_play_sink_set_vis_plugin),
(gen_vis_chain):
Implement vis switching while playing.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Comment smoke typefinder for now. The smokedec plugin needs one
frame per buffer but we have no parser yet, thus it simply crashes
in most situations.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinder for the smoke video codec. Copied from the jpeg plugin.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mid_type_find),
(plugin_init):
Add midi typefinder, copied from the timidity plugin.
Original commit message from CVS:
Based on patch by: Tomasz Sałaciński <tsalacinski gmail com>
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* tests/check/elements/subparse.c: (test_microdvd_with_italics),
(subparse_suite):
Forward slashes at the beginning and end of a line also signify
italics (Fixes: #518162).
Original commit message from CVS:
* gst/playback/gstplaysink.c: (find_property),
(gst_play_sink_find_property), (gen_video_chain),
(gst_play_sink_reconfigure), (gst_play_sink_get_last_frame):
Recursively search the sink element for a last-frame property so that we
can also find the property in autovideosink and friends that don't
always proxy the internal sink properties.
Original commit message from CVS:
2008-02-19 Julien Moutte <julien@fluendo.com>
Patch by: Josep Torra Valles <josep@fluendo.com>
* gst/typefind/gsttypefindfunctions.c: Increase the MPEG PS
typefind lookup to fix typefinding on HD clips.
Original commit message from CVS:
* gst/playback/gstscreenshot.c:
* gst/playback/gstscreenshot.h:
Fix up copyright (I rewrote the GStreamer-0.10 code for
this from scratch back in the days).
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstscreenshot.c: (feed_fakesrc), (save_result),
(create_element), (gst_play_frame_conv_convert):
* gst/playback/gstscreenshot.h:
Add screenshot conversion code from totem.
* gst/playback/gstplay-marshal.list:
* gst/playback/gstplaybin2.c: (gst_play_marshal_BUFFER__BOXED),
(gst_play_bin_class_init), (gst_play_bin_convert_frame),
(gst_play_bin_get_property), (no_more_pads_cb), (activate_group):
Implement frame property to get a color-unconverted snapshot.
Implement convert-frame action signal to get a converted snapshot image.
Configure connection speed in uridecodebin.
Document some more properties.
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gen_video_chain), (gen_audio_chain), (gst_play_sink_reconfigure),
(gst_play_sink_get_last_frame):
* gst/playback/gstplaysink.h:
Use last-buffer property of the video sink to get a video snapshot.
* tests/examples/seek/seek.c: (shot_cb), (main):
Add snapshot button for playbin2 and use the frame property to save the
frame as a png in the current directory.
Original commit message from CVS:
* configure.ac:
Require CVS of core for new API in collectpads.
* gst/adder/gstadder.c:
Use new API to make adder sparse stream aware.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (pad_added_cb), (pad_removed_cb),
(no_more_pads_cb):
Get the object data correct so that we can remove our channels
correctly.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gen_vis_chain), (gst_play_sink_reconfigure),
(gst_play_sink_request_pad):
Add option to disable async behaviour in the sinks when possible. This
makes it possible to avoid an audio queue when dealing with
visualisations.
Add option to add a queue for the audio path.
* tests/examples/seek/seek.c: (clear_streams), (update_streams),
(main):
Disable the vis checkbox to match the defaults of playbin2.
Only get the stream info when we need to.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_set_mute),
(gst_play_sink_get_mute), (gen_video_chain), (gen_audio_chain),
(gen_vis_chain), (gst_play_sink_reconfigure),
(gst_play_sink_request_pad):
Move tee in front of the audio and vis pipelines.
Add queue for audio for now.
Add visualisation support.
* tests/examples/seek/seek.c: (main):
Visualisation is by default disabled.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_audio_element):
* gst/playback/gstplaysink.c: (gen_audio_chain):
Handle case where we can't create the volume element a bit
better (#514307).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c:
Bump rank of jpeg and png typefinders, which will return maximum
probability in the most common cases (thus short-circuiting more
expensive typefinders like the mp3 one for these two quite common
image types).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Set is_dynamic as True if there are elements with both request
and sometimes src pad templates instead of breaking out when it
finds the first pad template that is a src.
Original commit message from CVS:
* gst/playback/gstplay-marshal.list:
Added marshal for streamselector Tags.
* gst/playback/gstplaybasebin.c: (set_active_source):
Streamselector now selects pads based on the pad object instead of its
name.
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(init_group), (gst_play_bin_init), (get_group), (get_tags),
(gst_play_bin_get_video_tags), (gst_play_bin_get_audio_tags),
(gst_play_bin_get_text_tags),
(gst_play_bin_set_current_video_stream),
(gst_play_bin_set_current_audio_stream),
(gst_play_bin_set_current_text_stream),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(pad_added_cb), (pad_removed_cb), (autoplug_select_cb):
Remove option to mute streams with the current-a/v/t property, we have
this functionality in the flags.
Add signals to notify when the number of A/V/T channels changed.
Add action signals to get tags for the A/V/T streams.
Implement setting the current A/V/T stream.
Rearrange some things to simplify stream selection.
Implement volume.
* gst/playback/gstplaysink.c: (gst_play_sink_set_volume),
(gst_play_sink_get_volume), (gst_play_sink_set_property),
(gst_play_sink_get_property), (gen_video_chain), (gen_audio_chain),
(activate_vis), (gst_play_sink_reconfigure):
* gst/playback/gstplaysink.h:
Add and implement volume setting methods.
* gst/playback/gststreamselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_finalize), (gst_selector_pad_get_property),
(gst_selector_pad_event), (gst_stream_selector_class_init),
(gst_stream_selector_init), (gst_stream_selector_finalize),
(gst_stream_selector_set_property),
(gst_stream_selector_get_property),
(gst_stream_selector_get_linked_pad),
(gst_stream_selector_request_new_pad):
* gst/playback/gststreamselector.h:
Add pad properties for tags and status of pads.
Keep tags on pads.
Make active pad selection based on pad object instead of name.
Original commit message from CVS:
* gst/tcp/gstfdset.h:
Remove unused field to same some memory.
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_class_init):
Mark action signals as such.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(get_group), (get_n_pads), (gst_play_bin_get_property),
(pad_added_cb), (no_more_pads_cb), (perform_eos),
(autoplug_select_cb), (deactivate_group):
Remove stream-info, we going for something easier.
Refactor getting the current group.
Implement getting the number of audio/video/text streams.
* gst/playback/gststreamselector.c:
(gst_stream_selector_class_init), (gst_stream_selector_init),
(gst_stream_selector_get_property),
(gst_stream_selector_request_new_pad),
(gst_stream_selector_release_pad):
* gst/playback/gststreamselector.h:
Add property for number of pads.
* tests/examples/seek/seek.c: (set_scale), (update_flag),
(vis_toggle_cb), (audio_toggle_cb), (video_toggle_cb),
(text_toggle_cb), (update_streams), (msg_async_done),
(msg_state_changed), (main):
Block slider callback when updating the slider position.
Add gui elements for controlling playbin2.
Add callback for async_done that updates position/duration.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (try_to_link_1):
Make sure we error out correctly if we can't activate one of
the elements we've added. Fixes#508138.
Original commit message from CVS:
* gst/playback/gstplay-enum.c:
(register_gst_autoplug_select_result),
(gst_autoplug_select_result_get_type), (register_gst_play_flags),
(gst_play_flags_get_type):
* gst/playback/gstplay-enum.h:
Add enums for configuration flags.
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(init_group), (gst_play_bin_init), (gst_play_bin_set_property),
(gst_play_bin_get_property), (no_more_pads_cb),
(autoplug_select_cb), (gst_play_bin_change_state):
Merge mode with flags.
Add more property getters/setters, defaults and docs.
Add properties to get number of audio/video/text streams.
Create sink object in _init so that we can always rely on it being
there.
* gst/playback/gstplaysink.c: (gst_play_sink_init),
(gen_video_chain), (gen_audio_chain), (gen_vis_chain),
(activate_vis), (gst_play_sink_reconfigure),
(gst_play_sink_set_flags), (gst_play_sink_get_flags),
(gst_play_sink_change_state):
* gst/playback/gstplaysink.h:
Use flags to configure the sink pipelines.
Add tee before audio pipeline so that we can use it for visualisations.
Start working on integrating visualisations.
Remove mode, we can do everything with the flags now.
Add method to configue the sink pipeline.
Original commit message from CVS:
* gst/volume/Makefile.am:
* gst/volume/gstvolume.c: (volume_choose_func),
(gst_volume_base_init), (gst_volume_class_init), (gst_volume_init),
(volume_setup):
* gst/volume/gstvolume.h:
Use GstAudioFilter as base class for the volume element instead of
plain GstBaseTransform.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_set_property),
(gst_video_scale_get_property), (gst_video_scale_transform_caps),
(gst_video_scale_transform):
Don't claim to be able to handle/transform caps that can't really
be handled by the currently selected scaling method (here: RGB or
packed YUV with 4-tap method). Also add locking to method property.
* tests/check/pipelines/simple-launch-lines.c: (setup_pipeline),
(test_basetransform_based):
Some test pipelines for the above (not entirely valgrind clean yet
apparently).
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_class_init):
* gst/playback/gstplaybasebin.c: (set_subtitles_visible),
(set_active_source):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(setup_sinks), (playbin_set_subtitles_visible):
Make switching off of subtitles work. To avoid all kind of
problems with unlinking of the subtitle input, we just keep
the subtitle inputs linked as they are and tell textoverlay
not to render them. Fixes#373011.
Other subtitle switching issues (esp. when there are both
external and in-stream subtitles) remain. They'll be solved
in playbin2.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
* gst/videotestsrc/gstvideotestsrc.h:
Add a "blink" pattern. Turn on the pain. Apologies. It's useful
for testing vertical refresh synchronization.
Original commit message from CVS:
* configure.ac:
* gst/volume/gstvolume.c: (gst_volume_init):
Use new gst_base_transform_set_gap_aware() function as volume
correctly handles GST_BUFFER_FLAG_GAP. Require core 0.10.15.1
for this.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_init), (gst_queue_finalize),
(reset_rate_timer), (update_in_rates), (update_out_rates),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_chain), (gst_queue_loop):
Use separate timers for input and output rates.
Pause measuring the output rate when we block for more data.
See #503262.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_chain):
Pause the timer to measure the input rate when we block because the
queue is filled. See #503262.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad), (connect_pad):
Expose the right pad in the right place with the right element.
Original commit message from CVS:
Patch by: Robin Stocker <robin dot stocker at gmx dot ch>
* gst/subparse/gstsubparse.c: (gst_sub_parse_data_format_autodetect):
Some .srt files start with chunk number 0 and not chunk number 1,
recognise and accept those as well (fixes#502497).
* tests/check/elements/subparse.c: (srt_input), (srt_input0),
(test_src):
Add unit test for the above.
Original commit message from CVS:
* gst/playback/Makefile.am:
Group decodebin2 and uridecodebin into the same plugin so that they
can share the GEnumType.
* gst/playback/gstdecodebin2.c: (_gst_array_accumulator),
(_gst_select_accumulator), (gst_decode_bin_class_init),
(gst_decode_bin_init), (gst_decode_bin_autoplug_sort),
(gst_decode_bin_autoplug_select), (gst_decode_bin_autoplug_add),
(analyze_new_pad), (connect_pad), (gst_decode_bin_plugin_init):
Add signal to sort factories instead of the more awkward autoplug-select
signal.
Modify autoplug_select so that we can try, skip or expose the
autopluggin of an element on a pad.
* gst/playback/gstfactorylists.c: (compare_ranks),
(decoders_filter), (sinks_filter), (gst_factory_list_is_type),
(element_filter), (gst_factory_list_get_elements),
(gst_factory_list_debug), (gst_factory_list_filter):
* gst/playback/gstfactorylists.h:
Simplify the API, allow getting elements based on mask.
* gst/playback/gstplay-marshal.list:
Add some more marshallers.
* gst/playback/gstplaybin2.c: (init_group), (gst_play_bin_init),
(gst_play_bin_finalize), (pad_removed_cb), (autoplug_factories_cb),
(autoplug_select_cb), (activate_group):
Add support for managing non-raw sinks by providing a custom element and
sink list to decodebin2.
Try to plug non-raw sinks when decodebin2 using autoplug-select of
decodebin2.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gst_play_sink_set_mode), (gst_play_sink_request_pad):
* gst/playback/gstplaysink.h:
Add support for raw and non-raw sinks.
Add support to force sinks selected by playbin2.
Don't plug raw converters for non-raw sinks.
* gst/playback/gsturidecodebin.c: (_gst_array_accumulator),
(_gst_select_accumulator), (gst_uri_decode_bin_class_init),
(proxy_autoplug_select_signal), (gst_uri_decode_bin_plugin_init),
(plugin_init):
Use right accumulators.
Proxy new signal.
Original commit message from CVS:
* gst/speexresample/README:
* gst/speexresample/arch.h:
* gst/speexresample/resample.c: (resampler_basic_direct_single),
(resampler_basic_direct_double),
(resampler_basic_interpolate_single),
(resampler_basic_interpolate_double),
(speex_resampler_process_native), (speex_resampler_process_float),
(speex_resampler_process_int),
(speex_resampler_process_interleaved_float),
(speex_resampler_process_interleaved_int),
(speex_resampler_get_input_latency),
(speex_resampler_get_output_latency):
* gst/speexresample/speex_resampler.h:
Update speex resampler to latest SVN. We're now down to only the
changes noted in README again.
* gst/speexresample/speex_resampler_wrapper.h:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_query):
Adjust to API changes.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Only post the latency message if we have a resampler state already.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Also post GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/speexresample/resample.c: (speex_resampler_get_latency),
(speex_resampler_drain_float), (speex_resampler_drain_int),
(speex_resampler_drain_interleaved_float),
(speex_resampler_drain_interleaved_int):
* gst/speexresample/speex_resampler.h:
* gst/speexresample/speex_resampler_wrapper.h:
Add functions to push the remaining samples and to get the latency
of the resampler. These will get added to Speex SVN in this or a
slightly changed form at some point too and should get merged then
again.
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_init),
(gst_speex_resample_init_state),
(gst_speex_resample_transform_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_fix_output_buffer), (gst_speex_resample_process),
(gst_speex_resample_query), (gst_speex_resample_query_type):
Drop the prepending zeroes and output the remaining samples on EOS.
Also properly implement the latency query for this. speexresample
should be completely ready for production use now.
Original commit message from CVS:
* gst/speexresample/README:
Add README explaining where the resampling code was taken from
and which changes were done.
* gst/speexresample/resample.c: (speex_alloc), (speex_realloc),
(speex_free):
Use g_malloc() and friends instead of malloc() to achieve higher
portability and define the functions inline.
* gst/speexresample/speex_resampler.h:
Add back some useless preprocessor stuff to keep the diff between
our version and the one from the Speex SVN repository lower.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_transform):
Some small cleanup and addition of a TODO item.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_process):
If the resampler gives less output samples than expected
adjust the output buffer and print a warning.
Original commit message from CVS:
* gst/playback/gststreamselector.c: (gst_selector_pad_get_type),
(gst_selector_pad_class_init), (gst_selector_pad_init),
(gst_selector_pad_finalize), (gst_selector_pad_reset),
(gst_selector_pad_get_linked_pads), (gst_selector_pad_event),
(gst_selector_pad_getcaps), (gst_selector_pad_bufferalloc),
(gst_selector_pad_chain), (gst_stream_selector_get_type),
(gst_stream_selector_base_init), (gst_stream_selector_class_init),
(gst_stream_selector_init), (gst_stream_selector_set_property),
(gst_stream_selector_get_linked_pad),
(gst_stream_selector_getcaps),
(gst_stream_selector_is_active_sinkpad),
(gst_stream_selector_activate_sinkpad),
(gst_stream_selector_get_linked_pads),
(gst_stream_selector_request_new_pad),
(gst_stream_selector_release_pad):
* gst/playback/gststreamselector.h:
Improve streamselector, make it select and unselect the current pad more
intelligently.
Subclass GstPad for the sinkpads of the selector.
Handle segments more correctly.
Fix caps negotiation.
Implement release_pad.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_group_check_if_drained), (source_pad_event_probe),
(remove_fakesink):
Add drained signal fired when decodebin finishes decoding the data.
Remove deprecated STATE_DIRTY message.
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_class_init),
(unknown_type_cb), (new_decoded_pad_cb), (pad_removed_cb),
(analyse_source), (proxy_drained_signal), (make_decoder),
(source_new_pad), (value_list_append_structure_list),
(handle_redirect_message), (handle_message):
Proxy the new drained signal.
Handle pad removed from decodebin.
Handle redirect messages by sorting multiple redirections based on the
connection speed.
Original commit message from CVS:
* docs/design/design-decodebin.txt:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
Update some more docs and comments.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_threshold_reached),
(finish_source):
Avoid crash when there are external subtitles (fixes#491722).
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_parse_caps):
Return NULL instead of an enum that happens to be 0, fixes warning
on MSVC (#492114).
* gst-libs/gst/audio/gstringbuffer.h:
No trailing commas in enum list (for gcc-2.9x).
* gst/videotestsrc/videotestsrc.c: (random_char):
Make information loss explicit instead of implicitly truncating to
eight bits via the return value. Fixes runtime error on MSVC when
using the debug CRT (#492114).
* win32/common/config.h.in:
Fix a bunch of '#undef FOO bar', which MSVC doesn't like (#492114).
* win32/common/libgstinterfaces.def:
* win32/common/libgstrtp.def:
Export a few more symbols (#492114).
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (find_suitable_channel_layout),
(gst_audio_convert_fixate_channels), (gst_audio_convert_fixate_caps):
Preserve channel layout when fixating the number of channels in the
output caps, or make sure there's a suitable channel position layout
set on the caps if required. Fixes#430677.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link), (type_found):
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
Post nice/more useful error message if we don't have a decoder for
the primary type.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_expose):
Be a bit more useful, unblock the pads after we fired the no-more-pads
signal so that we can use the signal to inspect and connect all pads
without having to keep extra state outside of decodebin.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c:
(gst_uri_decode_bin_autoplug_continue),
(gst_uri_decode_bin_class_init), (no_more_pads_full):
Implement default signal handler so that we return TRUE when nothing is
connected.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_dispose), (gst_decode_bin_set_caps),
(gst_decode_bin_set_subs_encoding),
(gst_decode_bin_get_subs_encoding), (gst_decode_bin_set_property),
(gst_decode_bin_get_property), (analyze_new_pad):
Move subtitle encoding property to decodebin2 so that it can set the
property value on all elements that it autoplugs and that require it.
Make caps refcounting more consistent in get/set.
* gst/playback/gsturidecodebin.c: (_gst_boolean_accumulator),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (proxy_unknown_type_signal),
(proxy_autoplug_continue_signal),
(proxy_autoplug_factories_signal), (proxy_autoplug_select_signal),
(make_decoder):
Proxy properties and relevant signals from the internal decodebin.
Make properties MT safe.
Original commit message from CVS:
Inspired by patch of: René Stadler <mail at renestadler dot de>
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_autoplug_continue),
(gst_decode_bin_autoplug_factories),
(gst_decode_bin_autoplug_select), (analyze_new_pad), (connect_pad),
(find_compatibles):
* gst/playback/gstplay-marshal.list:
Remove the autoplug-sort signal and replace it with a binding friendly
autoplug-select signal.
Add an autoplug-factories signal that can be used to generate a list of
factories to try to autoplug.
Add the GstPad to the autoplugging signal args as it might be needed to
make a good factory selection.
Fix up the marshallers for this. Fixes#407282.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (new_pad), (type_found):
Make the window for a race in typefind and shutting down smaller until
we figure out the right locking here. Avoids #485753 usually.
* gst/playback/gstdecodebin2.c: (type_found), (pad_added_group_cb):
Remove unneeded lock causing a race in typefind and shutting down.
Fixes#485753.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Also remove sinks when going to NULL because we might not complete the
state change to PAUSED, causing the PAUSED->READY state change not to
happen.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (type_found),
(gst_decode_bin_change_state):
Don't disconnect the have_type signal because we never reconnect it
later on. Instead keep a variable to see if we already detected a type.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink), (type_found):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_init),
(type_found):
Unlink the signal handler when we found the type, we're not going to do
anything sensible with more type_found signals anyway.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (utf8_type_find),
(sdp_check_header), (sdp_type_find), (plugin_init):
Add typefind function for application/sdp.
Remove some old dirac typefind code that was ifdeffed out.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_set_property):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/rtp/gstrtcpbuffer.c: (gst_rtcp_ntp_to_unix),
(gst_rtcp_unix_to_ntp):
* gst-libs/gst/rtsp/gstrtspmessage.c: (gst_rtsp_message_get_type):
* gst/playback/gstqueue2.c:
* tests/examples/seek/seek.c: (set_scale):
Fix a bunch of compile warnings shown with Forte.
* gst/audiorate/gstaudiorate.c:
Always pull in config.h before including any system headers.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_flush), (gst_queue_locked_enqueue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_src_activate_pull):
Also fix#476514 for queue2.
Original commit message from CVS:
2007-09-14 Julien MOUTTE <julien@moutte.net>
* gst/typefind/gsttypefindfunctions.c: (plugin_init): Add some
typefind for QCP files (RFC #3625)
Original commit message from CVS:
Patch by: Josep Torra Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c:
Increase upper limit for audio queue a bit; fixes preroll problem
with playbin and decodebin2 when playing a quicktime trailer with
multichannel audio via http (#464666).
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_choose_func):
* tests/check/elements/volume.c: (GST_START_TEST):
Revert the latest change: floating point samples are allowed to
have any value, not only values in the range [-1,1]. Thanks to Andy
Wingo for noticing.
Also fix processing of int32 samples with volumes > 4 by making the
unity value smaller which prevents overflows.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_choose_func),
(volume_process_double), (volume_process_double_clamp),
(volume_process_float_clamp):
Correctly clamp float/double samples in the [-1.0,1.0] range to
prevent weird effects.
* tests/check/elements/volume.c: (GST_START_TEST), (volume_suite):
Add unit tests for all samples types that had none before.
Original commit message from CVS:
2007-09-03 Johan Dahlin <jdahlin@async.com.br>
* gst/typefind/gsttypefindfunctions.c (plugin_init):
Add an audio/x-nsf typefind function for the nsfdec element.
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
The tcp and subparse plugins are under gst, but not totaly free of
dependencies. Handle selection inconfigure.ac, so that they show up
on the final list of what is build and what is not. Maybe they should
better be moved to ext.
Original commit message from CVS:
Patch by: Daniel Díaz <yosoy@danieldiaz.org>
* configure.ac:
* gst/Makefile.am:
Check if libxml provides HTML parser which subparse needs.
Fixes#451970.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link):
We need to set up delayed-linking whenever the caps are non-fixed,
not just when there are multiple types - use gst_pad_is_fixed()
to test.
Original commit message from CVS:
* ext/alsa/Makefile.am:
There is no GST_PLUGINS_BASE_LIBS defined.
* ext/alsa/gstalsa.c:
* ext/alsa/gstalsasink.c: (gst_alsasink_delay):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_delay):
Add support for ALSA 24-bit formats.
snd_pcm_delay can return an error code, especially
during XRUNS. In that case, the best we can do is assume
delay = 0.
* gst/audioconvert/Makefile.am:
Add flags from -base before any more-remote dependencies.
Original commit message from CVS:
Based on a patch by: Davyd <davyd at madeley dot id dot au>
* gst/volume/gstvolume.c: (volume_choose_func),
(volume_update_real_volume), (gst_volume_set_volume),
(gst_volume_init), (volume_process_int32),
(volume_process_int32_clamp), (volume_process_int24),
(volume_process_int24_clamp), (volume_process_int16),
(volume_process_int16_clamp), (volume_process_int8),
(volume_process_int8_clamp), (volume_update_volume), (plugin_init):
* gst/volume/gstvolume.h:
Add support for int32, int24 and int8 to the volume element.
Fixes#445529.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
Debug output fixes.
* tests/check/elements/audiorate.c: (do_perfect_stream_test),
(GST_START_TEST):
Change the number of buffers used; 500 is too many and leads to
timeouts.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
If we have a large (> 1 second) discontinuity, push a series of
smaller buffers rather than a single very large buffer. Avoids
unreasonably large single buffer allocations when encountering a
large gap.
* tests/check/elements/audiorate.c: (GST_START_TEST),
(audiorate_suite):
Add a test for this.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit),
(queue_remove_probe), (queue_threshold_reached):
Patch by: Josep Torra Valles <josep@fluendo.com>
Fixes: #465015
Make sure we remove the check_queues buffer probe from the
correct queue to avoid racily going back to "buffering 99%" when
buffering is actually complete.
Also, fix the spelling of Josep's surname in the ChangeLog.
Original commit message from CVS:
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_init), (queue_threshold_reached),
(gen_source_element), (setup_substreams),
(gst_play_base_bin_set_property), (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(gst_play_bin_handle_redirect_message):
Move connection-speed property from playbin to playbasebin so that we
can also configure it in source elements that have the connection-speed
property. Fixes#464028.
Add some debug info here and there.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_query):
Properly respond to conversion queries. Fixes#464079.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_init),
(gst_audio_test_src_src_fixate), (gst_audio_test_src_setcaps),
(gst_audio_test_src_init_sine_table),
(gst_audio_test_src_change_wave), (gst_audio_test_src_create):
* gst/audiotestsrc/gstaudiotestsrc.h:
Add float/double and int32 support to audiotestsrc. Fixes#460422.
Also set the default volume to the default value specified in the
GParamSpec.
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx dot net>
* gst/audioconvert/gstaudioquantize.c:
Fix C89 incompatibilities and spelling of explanations. Fixes#463215.
Original commit message from CVS:
Patch by: Dan Williams <dcbw at redhat dot com>
* gst/playback/gstplaybasebin.c:
(gst_play_base_bin_get_streaminfo_value_array):
Don't return NULL when querying the stream info value array but instead
return an empty array. Fixes#459204.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_init),
(gst_video_rate_query):
Use boilerplate.
Add latency query, might not be perfect yet but already works a lot
better. Fixes#442557.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_caps_to_pixfmt):
Fix the r_mask test for RGBA32 on little-endian.
Fix a stupid typo that would have obviously broken
compilation on big-endian, if anyone was testing.
Original commit message from CVS:
* gst/videotestsrc/videotestsrc.c: (paint_hline_AYUV),
(paint_hline_str4):
* gst/videotestsrc/videotestsrc.h:
Add alpha to the color struct.
Use a default alpha value of 255 instead of 128.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (no_more_pads_full),
(setup_source):
Clear the dynamic pads counter when starting a new uri. This makes
reusing playbin work again.
Fixes#454264.
Original commit message from CVS:
* gst/ffmpegcolorspace/avcodec.h:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt),
(gst_ffmpegcsp_avpicture_fill):
* gst/ffmpegcolorspace/imgconvert.c: (img_convert),
(img_get_alpha_info):
Add 2 new pixel formats - ABGR32 and ARGB32, which are reflections
of the existing BGRA32 and RGBA32 formats with the alpha at the other
end of the word. Partially fixes#451908
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_sink_getcaps),
(gst_adder_request_new_pad):
Make getcaps more robust by not using the proxycaps function. This makes
sure that we don't end up recursively calling getcaps upstream.
See #316248.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt):
Add a mapping for YUV format "IYU1", which is a 4:1:1 packed pixel
format, as produced by some dc1394 cameras like the iSight.
See http://www.fourcc.org/yuv.php#IYU1
Original commit message from CVS:
* gst/audioconvert/Makefile.am:
* gst/audioconvert/audioconvert.c: (audio_convert_get_func_index),
(check_default), (audio_convert_prepare_context),
(audio_convert_clean_context), (audio_convert_convert):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_dithering_get_type),
(gst_audio_convert_ns_get_type), (gst_audio_convert_class_init),
(gst_audio_convert_init), (gst_audio_convert_set_caps),
(gst_audio_convert_set_property), (gst_audio_convert_get_property):
* gst/audioconvert/gstaudioconvert.h:
* gst/audioconvert/gstaudioquantize.c:
(gst_audio_quantize_setup_noise_shaping),
(gst_audio_quantize_free_noise_shaping),
(gst_audio_quantize_setup_dither),
(gst_audio_quantize_free_dither),
(gst_audio_quantize_setup_quantize_func),
(gst_audio_quantize_setup), (gst_audio_quantize_free):
* gst/audioconvert/gstaudioquantize.h:
Implement dithering and noise shaping in audioconvert. By default now
TPDF dithering (and no noise shaping) will be used when converting
from a higher bit depth to 20 bit depth or smaller, otherwise
everything will be as it is now.
For the last audioconvert in a pipeline it would make sense to
use some kind of noise shaping, enabling it by default for all
conversions would give undesired results though. Fixes#360246.
* tests/check/elements/audioconvert.c: (setup_audioconvert),
(GST_START_TEST):
Adjust unit test for the new audioconvert.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering):
Use other metrics as well when estimating the buffer level.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (make_decoder), (setup_source):
Small debug improvement.
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering),
(plugin_init):
Tweak the rate estimation period.
When calculating the buffer filledness in rate estimation mode, don't
mix it with other metrics.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(gst_decode_group_expose), (gst_decode_group_free), (add_fakesink):
When creating the groups, allow for a 5 second, unlimited buffers
preroll phase after which we expose the group.
When the group is exposed, use a small number of buffers up to a 2
second limit. Also disconnect the overrun signal from multiqueue when we
exposed the group because it is not needed anymore.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_find_chains):
The chain should be freed if we error out here, else it will leak.
* gst/playback/gstdecodebin.c: (disconnect_unlinked_signals),
(cleanup_decodebin):
Don't forget to *properly* remove the signals, else it will leak.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
When handling a delayed-caps notification case, mark
the group as dynamic so that the nbdynamic count is
incremented and decremented correctly. Fixes: #449156
Patch by: Wim Taymans <wim@fluendo.com>
Original commit message from CVS:
* gst/videoscale/vs_4tap.c: (vs_image_scale_4tap_Y):
Update tmpbuf for all neccesary rows, not just one, as is required
when downscaling.
Fixes#402076.
Original commit message from CVS:
Patches by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_enqueue):
Fix a division by zero when the max percent is <= 0. Fixes#446572.
also update the buffering status when receiving events. Fixes#446551.
Original commit message from CVS:
Based on patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_peer_query),
(gst_queue_handle_src_query):
Wait for preroll before attempting to forward a duration query upstream.
Fixes#445505.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_init),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_get_range), (gst_queue_src_checkgetrange_function),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_src_activate_pull):
Add pull based scheduling and fix some deadlocks. Fixes#444523.
Does not yet completely work because duration queries upstream won't
block yet.
Original commit message from CVS:
Based on a patch by Sven Arvidsson <sa at whiz dot se>:
* gst/subparse/gstsubparse.c: (parse_subrip),
(subviewer_unescape_newlines), (parse_subviewer),
(gst_sub_parse_data_format_autodetect),
(gst_sub_parse_format_autodetect), (gst_subparse_type_find):
* gst/subparse/gstsubparse.h:
Add support for SubViewer version 1 and 2 subtitles. Fixes#394061.
* tests/check/elements/subparse.c: (GST_START_TEST),
(subparse_suite):
Add a unit test for both SubViewer formats.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_do_seek):
Don't overflow intermediate values when seeking to large time values
in audiotestsrc.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_have_data),
(gst_queue_create_read), (gst_queue_read_item_from_file),
(gst_queue_open_temp_location_file), (gst_queue_locked_enqueue):
Include stdio to define fseeko.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (no_more_pads_full),
(new_decoded_pad), (remove_pads), (make_decoder), (setup_source),
(gst_uri_decode_bin_change_state):
Make sure we name srcpads uniquely even when using different internal
decodebins.
Signal no-more-pads when no more dynamic elements exist.
Remove pads on cleanup.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter),
(analyze_new_pad), (connect_pad), (expose_pad), (caps_notify_cb),
(caps_notify_group_cb), (gst_decode_group_new),
(gst_decode_group_free):
Add support for delayed caps fixation when autoplugging.
Optimize cases where a multiqueue is not needed/wanted, like right after
anything that is not a demuxer.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_client_status_get_type),
(gst_multi_fd_sink_class_init), (gst_multi_fd_sink_add_full),
(gst_multi_fd_sink_remove_flush),
(gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_handle_client_write),
(gst_multi_fd_sink_handle_clients):
* gst/tcp/gstmultifdsink.h:
Add support for remuve_flush.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_overrun),
(no_more_pads_full):
Stop buffering when the group is commited because the queues filled up.
Fixes#442024.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
Handle unknown or invalid pads without crashing, as might occur if
a media file like an mp3 is specified as a subtitle file.
Fixes: #410039
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink), (dummy_blocked_cb),
(setup_sinks):
Block the subtitle bin output queue before ghosting it and linking,
then unblock after. This avoids spurious not-linked errors caused
by the queue starting up (because it gets linked when it is ghosted).
Fixes: #350299
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter):
Make decodebin2 autoplug depayloaders too.
* gst/playback/gsturidecodebin.c: (source_new_pad):
Set the newly created decoder in a usable state when autoplugging a
dynamic source such as RTSP.
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (cb_probe):
Ignore video-codec tag for audio streams and ignore audio-codec tags
for video streams. Should make codec name collection a bit more
robust against sloppy demuxers that send tag events containing both
tags down each pad.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_rates):
Tweak the buffering thresholds a little.
Update the buffer size with the previously calculate rate instead of
only when we calculate a new rate so that we get smoother buffering
updates.
* gst/playback/Makefile.am:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_base_init),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (unknown_type),
(add_element_stream), (no_more_pads_full), (no_more_pads),
(source_no_more_pads), (new_decoded_pad), (array_has_value),
(gen_source_element), (has_all_raw_caps), (analyse_source),
(remove_decoders), (make_decoder), (remove_source),
(source_new_pad), (setup_source), (decoder_query_init),
(decoder_query_duration_fold), (decoder_query_duration_done),
(decoder_query_position_fold), (decoder_query_position_done),
(decoder_query_latency_fold), (decoder_query_latency_done),
(decoder_query_seeking_fold), (decoder_query_seeking_done),
(decoder_query_generic_fold), (gst_uri_decode_bin_query),
(gst_uri_decode_bin_change_state), (plugin_init):
New element that intergrates a source, optional buffering element and
decodebin.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstqueue2.c: (gst_queue_get_type),
(gst_queue_class_init), (gst_queue_init), (gst_queue_finalize),
(gst_queue_getcaps), (gst_queue_bufferalloc),
(gst_queue_acceptcaps), (update_time_level), (apply_segment),
(apply_buffer), (update_buffering), (reset_rate_timer),
(update_rates), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_is_empty),
(gst_queue_is_filled), (gst_queue_chain), (gst_queue_push_one),
(gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_set_property), (gst_queue_get_property), (plugin_init):
On our way to playbin2 this is the new network queue that does buffering
all by itself using high and low watermarks. It can also measure up and
downstream bandwidth to optimally size the queue.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_do_seek):
* gst/videotestsrc/gstvideotestsrc.c: (gst_video_test_src_do_seek):
Use the segment->last_stop value to calculate the next timestamp to
generate after a seek; not the segment->start value.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg_sys_is_valid_pack),
(mpeg_sys_is_valid_pes), (mpeg_sys_is_valid_sys),
(mpeg_sys_type_find), (mpeg_ts_type_find), (mpeg4_video_type_find),
(mpeg_video_type_find), (mpeg_video_stream_type_find),
(plugin_init):
Consolidate and re-work our mpeg system stream detection to probe
more packets and produce a higher confidence result. Fixes a
regression caused by lowering the typefind probability last year
- related to bug #397810. Remove the redundant MPEG-1 specific
typefind function, as the new one detects both MPEG-1 & MPEG-2
happily.
Also cleanup the MPEG elementary and MPEG-TS detection functions a
little.
Tested against my media test directory, with some improvements and
no regressions.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (fill_buffer), (check_queue),
(queue_out_of_data):
Connect to the new queue "pushing" signal instead of the broken
"running" one.
Original commit message from CVS:
* gst-libs/gst/rtp/gstbasertpaudiopayload.c:
(gst_base_rtp_audio_payload_handle_frame_based_buffer):
Move variable declaration before the first instruction.
* gst/videotestsrc/videotestsrc.c:
Define M_PI if it's not defined yet.
* win32/common/libgstrtp.def:
Add new exported functions.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
If a buffer doesn't have a timestamp, assume it's contiguous with
the previous buffer, and synthesise timestamps appropriately.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
There is no sensible way to handle incoming buffers which don't have a
valid timestamp. We therefore discard them and wait for the next one.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found), (plugin_init):
* gst/playback/gstdecodebin2.c: (plugin_init):
Better error message for text files.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_init):
Initalize the AudioConvertCtx with zeroes, otherwise it will contain
pointers to random memory which are passed to g_free() when
audio_convert_prepare_context() is called the first time.
Original commit message from CVS:
Patch by: Dan Williams <dcbw redhat com>
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
Don't leak incoming buffer if gst_pad_push() returns a
non-OK flow. Fixes#432755.
* tests/check/elements/videorate.c: (GST_START_TEST),
(videorate_suite):
Unit test for the above by Yours Truly.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps), (gst_adder_src_event),
(gst_adder_sink_event), (gst_adder_collected):
Fix non-flushing segmented seeks, Fixes#340060 for me
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
* gst/subparse/samiparse.c:
Use GST_DISABLE_XML here
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xvimage_put),
(gst_xvimagesink_xwindow_new), (gst_xvimagesink_get_xv_support),
(gst_xvimagesink_buffer_alloc),
(gst_xvimagesink_navigation_send_event):
* sys/xvimage/xvimagesink.h:
Include stdlib.h when using atoi.
* tests/check/elements/playbin.c: (playbin_suite):
Use GST_DISABLE_REGISTRY here
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry dot fr>
* ext/pango/gstclockoverlay.c: (gst_clock_overlay_render_time):
Fix unused variable warning if HAVE_LOCALTIME_R is undefinied
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_audio_caps):
* gst/audioresample/gstaudioresample.c: (audioresample_do_output):
Use the correct format strings for integer formats.
Original commit message from CVS:
* gst/gdp/gstgdppay.c (gst_gdp_pay_chain):
* tests/check/pipelines/streamheader.c (tag_event_probe_cb,
GST_START_TEST, buffer_probe_cb, GST_START_TEST):
Fix a bug where serialized IN_CAPS buffers needed to be set IN_CAPS.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_setcaps),
(gst_video_rate_chain):
Add some debug.
* tests/check/elements/videorate.c: (GST_START_TEST),
(videorate_suite):
Added check for videorate changing caps handling. Closes#421834.
Original commit message from CVS:
* gst/gdp/gstgdppay.c: (gst_gdp_pay_chain),
(gst_gdp_pay_sink_event):
Make sure we set the IN_CAPS flag correctly.
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_render):
Get the IN_CAPS flag before we call functions that mess with the flags.
Original commit message from CVS:
* gst/gdp/gstgdppay.c (gst_gdp_pay_reset_streamheader,
gst_gdp_pay_chain, gst_gdp_pay_sink_event):
Only stamp buffers with offset/offset_end right before they get
pushed. This ensures offset continuity, which was not the case
before as shown by
gst-launch -v -m audiotestsrc num-buffers=10 ! audioconvert ! vorbisenc ! gdppay ! identity check-imperfect-offset=TRUE ! fakesink silent=TRUE
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink),
(gst_play_bin_change_state):
Activate sync in playbin, we are ready to handle it for live streams.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/playback/gstplaybasebin.c: (add_stream):
Fix leak in add_stream(), when g_value_set_object() increases the
refcount of streaminfo object. Fixes#426250.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
* gst/videotestsrc/gstvideotestsrc.h:
* gst/videotestsrc/videotestsrc.c:
* gst/videotestsrc/videotestsrc.h:
Add a test pattern called "circular", which has concentric
rings with varying radial frequency. The main purpose of this
pattern is to test fidelity loss in a filter or scaler element.
Notably, this pattern is scale invariant, and is optimally viewed
with a width (and height) of 400.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/playback/gstdecodebin2.c: (connect_pad), (expose_pad),
(deactivate_free_recursive):
Decodebin2 doesn't unref pads it obtains in some occasions:
- multiqueue src pads, when either connecting further or exposing
- sink pads of new autoplugged elements
- peer pads when recursively freeing elements
Fixes#425455.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
with some minor changes
* gst-libs/gst/floatcast/floatcast.h:
Use more efficient float endianness conversion functions that don't
involve 2 function calls per value.
* gst/audioconvert/audioconvert.c: (audio_convert_get_func_index),
(check_default), (audio_convert_prepare_context):
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_parse_caps), (make_lossless_changes):
Support non-native endianness floats as input and output.
Fixes#339838.
* tests/check/elements/audioconvert.c: (verify_convert),
(GST_START_TEST):
Add unit tests for the non-native endianness float conversions.
Original commit message from CVS:
2007-03-29 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev): Make
perfect offsets also, not just timestamps.
* tests/check/elements/videorate.c (test_more): Test that given
any incoming offsets, that videorate produces perfect offsets.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c:
Add docs to the integer pack functions and implement proper
rounding. Before we had rounding towards negative infinity, i.e.
always the smaller number was taken. Now we use natural rounding,
i.e. rounding to the nearest integer and to the one with the largest
absolute value for X.5. The old rounding introduced some minor
distortions. Fixes#420079
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Fix one unit test that assumed the old rounding and added unit tests
for checking signed/unsigned int16 <-> signed/unsigned int16 with
depth 8, one for signed int16 <-> unsigned int16 and one for the new
rounding from signed int32 to signed/unsigned int16.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (strip_width_64),
(gst_audio_convert_transform_caps):
Fix typo in debug line introduced recently, as pointed out on irc.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_setcaps),
(gst_video_rate_reset), (gst_video_rate_chain):
If videorate changes caps, we can no longer use the old buffer
(which may have a different size, incompatible with our caps).
So don't do that; just duplicate the new frame more times.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init):
Remove playbin's override of the set_clock vmethod. It's irrelevant
after Wim's commit on the 19th.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* gst/subparse/samiparse.c: (handle_start_font):
Special-case some more colour names that pango doesn't handle by
default. Fixes#420578.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (remove_fakesink):
Don't post STATE_DIRTY anymore.
* gst/playback/gstplaybin.c: (add_sink), (gst_play_bin_send_event),
(gst_play_bin_change_state):
Remove stream_time reset in seek handling, core does that now.
Disable clocking for live pipelines by forcing a NULL clock to the
complete pipeline, core is too smart now for our previous hack.
We can always autoplug in PAUSED now.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (make_lossless_changes),
(strip_width_64), (append_with_other_format):
Previous fix was too simplistic, and broke the tests. Use a better
approach; only strip 64 from widths for integer audio.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (make_lossless_changes),
(gst_audio_convert_transform_caps):
We don't support 64 bit integer audio, so don't try to claim we can.
Stops us producing caps don't match our template caps.
Update comments.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(audioresample_check_discont), (audioresample_transform):
Don't trigger discontinuities for very small imperfections; a filter
flush will sound bad, and many plugins have rounding errors leading
to these.
Original commit message from CVS:
* gst/audioresample/debug.h:
* gst/audioresample/resample.c: (resample_init):
Since I really am not interested in a debug line for each sample
being processed, move the library's debugging to its own category,
libaudioresample
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_text_event),
(gst_text_overlay_video_event):
Some more logging. Only accept newsegment events in TIME format and
send a WARNING message if they are not in TIME format.
* gst/subparse/gstsubparse.c: (gst_sub_parse_dispose),
(gst_sub_parse_init), (gst_sub_parse_src_event), (handle_buffer),
(gst_sub_parse_chain), (gst_sub_parse_sink_event):
* gst/subparse/gstsubparse.h:
No need to allocate GstSegment structure dynamically, just put it
into the instance structure; ignore newsegment events in BYTE
format and in particular don't let it overwrite our saved TIME
segment from the last seek.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (ac3_type_find):
Replace AC3 typefinder with one that isn't terrible, and actually
works usefully.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (handle_buffer):
Break out of loop in chain function as soon as possible if we get
a non-OK flow return.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_open):
Extra log line.
* ext/pango/gstclockoverlay.c: (gst_clock_overlay_init):
* ext/pango/gsttimeoverlay.c: (gst_time_overlay_init):
Use pango_font_description_set_family_static instead of
pango_font_description_set_family to save a string copy (it was
leaking due to the strdup anyway)
* gst/tcp/gsttcpclientsink.c: (gst_tcp_client_sink_finalize):
* gst/tcp/gsttcpclientsrc.c: (gst_tcp_client_src_finalize):
* gst/tcp/gsttcpserversink.c: (gst_tcp_server_sink_finalize):
* gst/tcp/gsttcpserversrc.c: (gst_tcp_server_src_finalize):
Chain up in finalize.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
* docs/plugins/inspect/plugin-decodebin2.xml:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init):
Add documentation for decodebin2 that indicates that the API
is still unstable.
Original commit message from CVS:
Patch by: Ed Catmur <ed at catmur dot co dot uk>
* gst/playback/gstplaybin.c: (gst_play_bin_vis_unblocked),
(gst_play_bin_vis_blocked), (gst_play_bin_set_property):
Fix race condition when rapidly switching visualisations in playbin.
Fixes#401029.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float), (double), (float_hq),
(double_hq), (audio_convert_get_func_index), (check_default),
(audio_convert_prepare_context), (audio_convert_convert):
Also make valgrind happy and avoid copying data in some cases.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float), (double), (float_hq),
(double_hq), (audio_convert_get_func_index),
(audio_convert_prepare_context), (audio_convert_convert):
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_class_init), (gst_audio_convert_get_unit_size),
(gst_audio_convert_transform_caps):
* tests/check/elements/audioconvert.c: (GST_START_TEST),
(audioconvert_suite):
Don't run inplace if that overwrites source data as we go. Add more
tests. Fixes#339837 even more.
Original commit message from CVS:
* configure.ac:
* gst/app/Makefile.am:
* gst/app/gstapp.c:
* gst/app/gstappsrc.c:
* gst/app/gstappsrc.h:
Add a new plugin/library to make it easy for apps to shove
data into a pipeline.
Original commit message from CVS:
Patch by: Loïc Minier <lool+gnome at via ecp fr>
* configure.ac:
* ext/alsa/Makefile.am:
* gst/audiotestsrc/Makefile.am:
Fix compilation with LDFLAGS='-Wl,-z,defs' (#410963).
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float), (double), (float_hq),
(double_hq), (audio_convert_get_func_index),
(audio_convert_prepare_context), (audio_convert_convert):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_setup_matrix),
(gst_channel_mix_mix_int), (gst_channel_mix_mix_float):
* gst/audioconvert/gstchannelmix.h:
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add float as an intermediate format, as well as float mixing. Enable
test that was failing before. Fixes#339837
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_process_int16),
(volume_process_int16_clamp), (volume_set_caps):
Unbreak volume, value remains gint.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose),
(multi_queue_underrun_cb), (gst_decode_group_check_if_drained),
(sort_end_pads), (gst_decode_group_expose),
(gst_decode_group_hide):
Don't free groups from the streaming threads. Just put them aside and
free them in dispose.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (connect_element),
(pad_added_group_cb), (gst_decode_group_check_if_blocked),
(sort_end_pads), (gst_decode_group_expose):
Handle dynamic pads within groups.
Sort pads before exposing them in order to make playbin happy.
There still is a race with the multiqueue filling up. This should be
solved separately.
Fixes#398721
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
When we have external subtitles and wait for the subtitle decodebin
to get up and running, we set up a (sync) bus handler for the
subtitle decodebin, so we can stop waiting when it posts an error
message. However, we should do that before we set the subtitle
decodebin's state to playing, otherwise things are racy and we might
miss error messages posted before we had a chance to set up the bus.
This should finally fix totem hanging on .txt pseudo-subtitle files.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (subrip_remove_unhandled_tag),
(subrip_remove_unhandled_tags), (parse_subrip):
For SubRip (.srt) subtitles, ignore all markup tags we don't
handle (like font tags, for example).
* tests/check/elements/subparse.c:
Add test for this.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (add_fakesink),
(gst_decode_bin_change_state):
Don't error out if there is no fakesink in the READY to NULL state
change, since when decodebin is re-used, we're only adding the
fakesink element in READY to PAUSED.
* tests/check/elements/decodebin.c:
(new_decoded_pad_plug_fakesink_cb), (GST_START_TEST),
(decodebin_suite):
Minimal unit test to make sure we can use the same decodebin
instance twice (at least with audiotestsrc input).
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c:
A width and height of 1 makes us crash, so increase minimum size to
2x2 pixels until someone feels like fixing this (#404512).
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(set_structure_widths_32_and_64), (make_lossless_changes):
We don't support floats with a width of 40, 48 or 56 bits.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float), (double),
(audio_convert_get_func_index):
* gst/audioconvert/gstaudioconvert.c: (set_structure_widths),
(make_lossless_changes):
Support for 64-bit float audio in audioconvert (#339837)
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_vis_element):
Add audioresample+audioconvert in front of the visualisation
element, so that elements like libvisual 0.4 that don't support all
samplerates can work.
Fixes: #402505
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
Take some locks and make a copy of the streaminfo value array we
maintain while holding the lock, so that the application can
retrieve the stream-info as a value array in a thread-safe way.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose):
Cast lock macro parameters to make sure we're actually accessing the
lock member at the right class level. Free list itself in _dispose()
as well and NULL it in case dispose gets called multiple times.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_bin_dispose),(gst_decode_bin_finalize):
Free GstDecodeGroups no longer used.
(gst_decode_group_expose):
Don't unlock too many times !
(deactivate_free_recursive):
Free iterator once we're done with it.
Fix for recursively deactivating elements (stop at ghostpads).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (handoff):
Fix up caps on the frame buffer before we save it and potentially
make it accessible to other threads via g_object_get; also use
gst_buffer_replace() instead of gst_mini_object_replace().
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_finalize),
(gst_decode_group_new), (gst_decode_group_free):
Set queues to bigger sizes to cope with HD contents.
Fix some mutex freeing and add comment about MT safe methods.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_finalize):
Don't leak mutex.
* tests/check/elements/playbin.c:
(test_sink_usage_video_only_stream),
(test_suburi_error_unknowntype), (test_suburi_error_invalidfile),
(test_suburi_error_wrongproto), (test_missing_urisource_handler),
(test_missing_suburisource_handler),
(test_missing_primary_decoder), (playbin_suite):
Run all tests once with decodebin and once with decodebin2.
One test does not pass yet with decodebin2.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(get_current_group), (group_demuxer_event_probe),
(gst_decode_group_expose), (deactivate_free_recursive),
(gst_decode_group_free):
Cleanups.
Don't forget to emit 'no-more-pads' once a group is exposed.
Cleanup elements from a DecodeGroup once we remove it.
Protect call to gst_decode_group_expose() with the decodebin lock.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg4_video_type_find):
Don't go into an endless loop if the file starts with 00 00 01 2X,
like quicktime redirect files might. Fixes#396042.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/typefindfunctions.c: (GST_START_TEST),
(typefindfunctions_suite):
Add unit test for the above.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_subtitle),
(gen_source_element), (gst_play_base_bin_change_state):
Attempt at a better error message in case we don't have the required
URI handler installed; post missing-plugin message also when we're
missing an URI handler for the subtitle URI; clean up properly also
when an error occurs and we never made it to PAUSED state.
* tests/check/elements/playbin.c: (GST_START_TEST),
(playbin_suite):
Check that we're also getting a missing-plugin messsage for a
missing subtitle URI handler (and clean up properly).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg2_sys_type_find):
Lower probability a bit if the marker isn't right at the start,
to decrease the chance of false positives.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg2_sys_type_find):
Small mpeg2 system stream typefinding improvement: make typefinder
probe a bit into the stream instead of just looking for a marker
at the beginning. Fixes#397810.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstdecodebin.c: (close_pad_link):
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_handle_message_func), (unknown_type):
Let decodebin be the element to post missing-plugin messages for
missing decoders (rather than playbin); make playbin implement
GstBin::handle_message so we can suppress missing-plugin messages
for types we're not handling on purpose (don't want to bring up an
installer in those cases).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (post_missing_element_message),
(gen_video_element), (gen_text_element), (gen_audio_element),
(gen_vis_element):
Post missing-plugin messages also when we error out because
converters, textoverlay or auto*sinks are missing (#161922).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (dynamic_add), (close_pad_link),
(is_demuxer_element), (new_caps):
* gst/playback/gstplaybasebin.c: (source_new_pad):
Fix the case where we try to ref a NULL element when we delay a link
because of unfixed caps.
Set the state of autoplugged decodebins to PAUSED.
RTSP now works in playbin, we can remove it from the blacklist.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstplaybasebin.c: (string_arr_has_str),
(unknown_type), (setup_subtitle), (gen_source_element):
* gst/playback/gstplaybin.c: (plugin_init):
Post missing-plugin messages on the bus for missing sources and
missing decoders/demuxers/depayloaders; fix error code used when
we're missing an URI handler source; for media types that we are not
handling on purpose at the moment, don't print "don't know how to
handle xyz" messages to the terminal or post missing-plugin
messages on the bus.
* tests/check/elements/playbin.c: (create_playbin),
(GST_START_TEST), (gst_codec_src_uri_get_type),
(gst_codec_src_uri_get_protocols), (gst_codec_src_uri_get_uri),
(gst_codec_src_uri_set_uri), (gst_codec_src_uri_handler_init),
(gst_codec_src_init_type), (gst_codec_src_base_init),
(gst_codec_src_create), (gst_codec_src_class_init),
(gst_codec_src_init), (plugin_init), (playbin_suite):
Add some tests for the missing-plugin stuff.
Original commit message from CVS:
Patch by: Günter Thelen <daedalus dot inc at gmx net>
* gst/typefind/gsttypefindfunctions.c: (flac_type_find),
(plugin_init):
Add typefinder for flac-in-ogg in conformance with the ogg-mapping
on flac.sf.net (there appear to be other versions of the first
ogg page in the wild) (#391365).
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* gst/subparse/gstsubparse.h:
Remove spurious 1000 subtrahend when calculating the timestamp from
the frame number and the frame rate . Also, use the frames/second
value specified in the first line of the file, if one is specified
there. Should fix#357503.
* tests/check/elements/subparse.c: (do_test),
(test_tmplayer_do_test), (test_microdvd_do_test), (GST_START_TEST),
(subparse_suite):
Add some basic unit tests for the microdvd subtitle format.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_pad_stream_out):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst/playback/gstdecodebin2.c:
(gst_decode_group_check_if_blocked):
Printf format and missing argument fixes.
Original commit message from CVS:
* gst/ffmpegcolorspace/avcodec.h:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt),
(gst_ffmpegcsp_avpicture_fill):
* gst/ffmpegcolorspace/imgconvert.c: (img_convert),
(img_get_alpha_info):
Add 2 new caps arrangements, for 24-bit RGB and BGR in 32-bits, but at the
other end of the word. Fixes: #387073.
Add some inconsequential branch hints in a couple of places.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_caps_to_smpfmt):
The "signed" field in raw audio caps is of boolean type, trying to
extract the value with _get_int() will fail (fix to keep in sync with
the copy in gst-ffmpeg)
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (vivo_type_find),
(plugin_init):
Add typefinder for VIVO files (my christmas present to the 90s).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found):
Special-case the text/plain media type: we only want to recognise it
as a 'raw' decoded media type if it comes from a demuxer or subtitle
parser, but not if the entire stream is of text/plain type. If the
entire stream is text/plain, we should just error out.
This fixes playback of audio files with lyrics in totem. Totem can't
distinguish between text files and subtitle files and passes any
.txt file with the same basename as the main file to playbin as
suburi, and playbin will then throw a 'subtitle found, but no video
stream' error, which isn't entirely helpful. See #380342.
Also, with this change we'll show a slightly more correct error
message in case totem passes a playlist file to us (although a
custom error message wording instead of the default text would
probably not be a bad idea either).
Same problem also needs to be fixed for playbin+decodebin2.
* tests/check/Makefile.am:
* tests/check/elements/decodebin.c: (src_handoff_cb),
(decodebin_new_decoded_pad_cb), (GST_START_TEST),
(decodebin_suite):
Add simple unit test for decodebin for the above.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_change_state):
Refuse to change state to READY when we failed to create any of the
required elements in our instance init function.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (find_dynamic), (dynamic_add),
(close_pad_link), (elem_is_dynamic), (unlinked), (close_link):
Handle the case where an element has multiple pads with
unfixed caps as well as still possibly producing more dynamic
pads by storing each case as a distinct entry in the dynamic list.
Fixes#38223 again.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (check_queue_event):
Improve debug.
* gst/videoscale/gstvideoscale.c: (gst_video_scale_transform_caps):
Fix width and height range from 16 - 4096 to 1 - MAXINT, just like the
padtemplate caps. Refixes #357577.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (check_queue_event),
(queue_threshold_reached), (queue_out_of_data),
(gen_preroll_element):
Add event probe to see when EOS is in a queue and we can disable the
underrun signals. Fixes#357577.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source),
(gst_play_base_bin_change_state):
Disable rtsp:// uris for the release, it's not good enough yet.
Remove unused var.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find_at_offset):
Avoid integer underflow when the found probability for mp3 is
smaller than the 'penalty' we subtract if there's not a clean
mp3 header sync at offset 0.
Original commit message from CVS:
* gst/videotestsrc/Makefile.am:
* tests/check/Makefile.am:
Make sure our checks and the videotestsrc plugin link against the
local uninstalled gst libs and not any installed gst libs that
might happen to exist as well.
* tests/check/elements/adder.c: (message_received),
(test_event_message_received), (test_play_twice_message_received):
* tests/check/elements/ffmpegcolorspace.c: (GST_START_TEST):
Fix compiler warnings when compiling against core with disabled
debugging system.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_reset),
(gst_audio_rate_sink_event), (gst_audio_rate_chain):
Fix audiorate, so that it accurately sets offsets and timestamps.
Doesn't change the fundamental algorithmic decisions; so should be
safe.
* tests/check/Makefile.am:
Enable audiorate test now that it passes.
Original commit message from CVS:
* configure.ac:
Bump liboil requirement to 0.3.8.
* gst-libs/gst/riff/riff-media.c:
Add Dirac fourcc.
* gst/videoscale/vs_image.h:
* gst/videoscale/vs_scanline.h:
Use liboil's stdint.h.
* gst/videotestsrc/videotestsrc.c:
Remove liboil related ifdef's, since they aren't needed now, and
won't work with future versions.
Original commit message from CVS:
* gst/videoscale/Makefile.am:
* gst/videoscale/gstvideoscale.c:
* gst/videoscale/gstvideoscale.h:
* gst/videoscale/vs_4tap.c:
* gst/videoscale/vs_4tap.h:
* gst/videoscale/vs_image.c:
* gst/videoscale/vs_image.h:
* gst/videoscale/vs_scanline.c:
* gst/videoscale/vs_scanline.h:
Add a 4-tap image scaler. Theoretically looks much prettier.
The tap calculation could use some improvement.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find_at_offset):
Lower the probability of mp3 typefinding functions if we don't find a
valid mp3 header at the start of the file.
Closes#369482
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_add_full),
(gst_multi_fd_sink_remove), (gst_multi_fd_sink_clear),
(gst_multi_fd_sink_get_stats),
(gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_queue_buffer),
(gst_multi_fd_sink_handle_clients):
* gst/tcp/gstmultifdsink.h:
Make using the remove or clear signals threadsafe.
Make calling get-stats with an invalid fd not segfault.
Fixes 368273.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (qtif_type_find),
(plugin_init):
Add typefinder for QuickTime Image Files (see #366156).
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_transform_ip):
Use stream time to synchronize volume property instead of rather random
timestamps. This is needed when gnonlin does its time shifting.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (subrip_fix_up_markup),
(parse_subrip), (handle_buffer):
Add missing closing tags for markup and fix broken markup,
otherwise pango won't render anything (fixes#357531). Also,
make sure the text we send out is always NUL-terminated
(better safe than sorry etc.).
* tests/check/elements/subparse.c: (test_srt_do_test),
(test_srt):
Some more tests for .srt incl. tests for the above stuff.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c:
(gst_multi_fd_sink_client_queue_buffer):
If caps change, then update the client's idea of the caps so that we
don't end up re-sending streamheaders for every single buffer after
the caps change.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mmsh_type_find),
(plugin_init):
Typefind mmsh header data packet to application/x-mmsh (#362625).
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (strip_trailing_newlines),
(parse_subrip):
Strip trailing newlines from subtitle text output.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (gst_sub_parse_dispose),
(gst_sub_parse_change_state):
Fix memleak; clear subparse->textbuf n state change function.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect):
Don't require subrip (.srt) files to start with a chunk number of 1.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (subbin_startup_sync_msg),
(setup_source):
Catch async errors when starting up the subtitle bin, so we can
stop waiting and continue with the main film instead of hanging
forever. Fixes#339366.
* tests/check/elements/playbin.c: (playbin_suite):
Enable unit test for the above.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
Don't hang forever if the subbin already fails to start up in
the state change to PAUSED (#339366).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (get_our_ghost_pad),
(remove_element_chain):
Don't return a pad from get_our_ghost_pad unless it is actually the
one we want.
Change a cast in remove_element_chain slightly.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps):
Don't crash when ringbuffer is not yet created.
Patch by: Ville Syrjala <ville dot syrjala at movial dot fi>
Fixes#361634.
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
* gst/playback/gststreamselector.c:
(gst_stream_selector_request_new_pad):
Activate pads befre adding them to running elements.
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* ext/gnomevfs/gstgnomevfssink.c:
* ext/gnomevfs/gstgnomevfssrc.c:
Fix URI interface implementation return type.
* ext/pango/gsttextoverlay.c: (gst_text_overlay_set_property):
Fix what looks like a copy/paste issue when assigning values.
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
(gst_audio_filter_template_get_type):
Cast to prevent Forte warnings.
* gst-libs/gst/cdda/gstcddabasesrc.c: (gst_cdda_base_src_create):
Fix URI interface implementation return type.
gst_pad_query_position requires a signed integer pointer as
3rd parameter, GstClockTime is unsigned.
* gst/audioconvert/audioconvert.c:
Fix integer overflow when treated as signed.
* gst/audioresample/resample.c: (resample_add_input_data):
Cast to prevent warnings on Forte.
* gst/ffmpegcolorspace/imgconvert.c: (build_rgb_palette):
Fix integer overflow when treated as signed.
* gst/ffmpegcolorspace/imgconvert_template.h:
Fix integer overflow when treated as signed. RGBA_OUT shifts bits.
* gst/playback/gstdecodebin.c: (queue_filled_cb),
(cleanup_decodebin):
Who initialises a guint to -1!
Cast function pointers to prevent warnings on Forte.
* gst/playback/gstplaybasebin.c: (queue_deadlock_check),
(queue_threshold_reached):
Cast function pointers correctly to prevent warnings on Forte.
* gst/playback/gststreaminfo.c: (gst_stream_info_dispose):
Cast function pointers correctly to prevent warnings on Forte.
* gst/subparse/gstssaparse.c: (gst_ssa_parse_setcaps):
Obvious change to unsigned, 0xEF > max signed char.
* gst/tcp/gstmultifdsink.c: (get_buffers_max), (count_burst_unit):
GstClockTime is unsigned, initialise correctly.
* gst/tcp/gsttcp.c: (gst_tcp_socket_write):
Cast so pointer arithemetic doesn't cause warnings on Forte.
* gst/videorate/gstvideorate.c:
Use correct return value.
* tests/examples/seek/scrubby.c:
GstClockTime is unsigned, initialise correctly.
Original commit message from CVS:
Patch by: Ferenc Gerlits <fgerlits at gmail com>
* gst/typefind/gsttypefindfunctions.c:
Recognise XML files and XML-like files shorter than 256 bytes as
well (fixes#359237).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(close_pad_link):
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
Activate dynamic pads before adding them to the element.
Original commit message from CVS:
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_change_state):
Also call parent state change function to activate pads.
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find_at_offset),
(mpeg1_parse_header), (mpeg1_sys_type_find):
Add some more debug info in mpeg typefinding.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_class_init),
(gst_multi_fd_sink_get_stats), (find_limits),
(gst_multi_fd_sink_queue_buffer):
API: add dropped_buffers to the get-stats GValueArray
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link):
Fix typo in a debug statement.
* gst/playback/gstplaybasebin.c: (probe_triggered),
(new_decoded_pad_full), (new_decoded_pad), (subs_new_decoded_pad),
(gen_source_element), (source_new_pad), (analyse_source),
(setup_source):
When handling no_more_pads in new_decoded_pad, make sure to treat
subtitle pads correctly. Fixes playback with subtitle files.
Move a recurring message to LOG level.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_get_xv_support):
The maximum value for the Xv colorkey on this Radeon is 0xFFFFFFFF,
which ends up as -1 when cast to an int. Make the logic handle the
max value as an unsigned mask and only change the colorkey when it's
a value we recognise.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (dynamic_create), (dynamic_free),
(close_pad_link), (dynamic_remove), (no_more_pads), (new_caps),
(find_dynamic), (unlinked), (close_link):
Implement delayed caps linking needed for element with a lot of
different caps on the src pads that get fixed at runtime.
Improve management of dynamic elements.
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_init),
(group_destroy), (group_commit), (check_queue), (queue_overrun),
(gen_preroll_element), (remove_groups), (unknown_type),
(add_element_stream), (no_more_pads_full), (no_more_pads),
(sub_no_more_pads), (source_no_more_pads), (preroll_unlinked),
(new_decoded_pad), (setup_subtitle), (array_has_value),
(gen_source_element), (source_new_pad), (has_all_raw_caps),
(analyse_source), (remove_decoders), (make_decoder),
(remove_source), (setup_source), (finish_source), (prepare_output),
(gst_play_base_bin_change_state):
* gst/playback/gstplaybasebin.h:
Use more _CAST instead of full type checking casts.
Small cleanups, plug some leaks.
Handle dynamic sources.
Add some helper functions to create lists of strings used for
blacklisting and other stuff.
Refactor some code dealing with analysing the source.
Re-enable sources without pads (like cd:// or other selfcontained
elements).
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
Set caps on outgoing buffers.
* gst/videorate/gstvideorate.c: (gst_video_rate_flush_prev),
(gst_video_rate_event), (gst_video_rate_chain):
* gst/videorate/gstvideorate.h:
Fix videorate some more. Fixes#357977
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_reset),
(gst_audio_rate_sink_event), (gst_audio_rate_convert),
(gst_audio_rate_convert_segments), (gst_audio_rate_chain):
Keep sink and src segment to keep track of time and support more
input formats.
Fix bogus next_offset and run_time calculation, don't understand how
this could have worked before. Fixes#357976.
Remove some unneeded vars.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (remove_sinks):
Only remove visualisation from visbin if there is a visbin (or:
don't throw warnings when closing totem without playing a file).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_factory_filter),
(add_fakesink), (remove_fakesink), (pad_probe), (close_pad_link),
(is_demuxer_element), (try_to_link_1), (get_our_ghost_pad),
(new_pad):
Cleanups and small leak fixes.
Added Depayloaders to valid list of autopluggable elements.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_vis_blocked), (gst_play_bin_set_property),
(gen_video_element), (gen_text_element), (gen_audio_element),
(gen_vis_element), (remove_sinks), (add_sink), (setup_sinks),
(gst_play_bin_set_clock_func), (gst_play_bin_change_state):
Detect NO_PREROLL state change returns and disable clock distribution to
the sinks so that sync is disabled.
Avoid some type checking and do simple casts instead.
Small cleanups, fix some FIXMEs.
Be more robust when linking user specified elements, catch an report
errors. Fixes#357404.
Fix some leaks in the error paths.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/playback/test.c:
Fix compilation with uClibc and -Werror (#357591).
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (make_lossless_changes),
(gst_audio_convert_transform_caps):
* gst/videotestsrc/videotestsrc.c: (gst_video_test_src_unicolor):
* gst/videotestsrc/videotestsrc.h:
A few array const-ifications.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian dot net>
* gst/subparse/samiparse.c: (handle_start_font),
(fix_invalid_entities):
More case-insensitivity for certain tags; recognise entities with
decimal codes as special entities as well (#357330).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gen_preroll_element):
Improve buffering a bit by avoiding a deadlock because we cannot assume
the underrun is always called.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit),
(queue_deadlock_check), (queue_overrun), (queue_threshold_reached),
(queue_out_of_data), (gen_preroll_element),
(preroll_remove_overrun), (probe_triggered):
Refactor handling of overrun detection.
Separate handling of group completion and deadlock detection when doing
network buffering. This should fix some deadlocks that were not detected
because the group was completed.
Add more comments, improve debugging.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_sync_method_get_type),
(gst_multi_fd_sink_class_init), (get_buffers_max), (find_limits),
(gst_multi_fd_sink_recover_client),
(gst_multi_fd_sink_queue_buffer), (gst_multi_fd_sink_set_property),
(gst_multi_fd_sink_get_property):
* gst/tcp/gstmultifdsink.h:
Implement stubbed out properties unit-type, units-soft-max,
units-max, to allow specifying maximum sizes in units other than
buffers.
Fixes#355935
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
Use G_UNLIKELY in _create and log one more detail.
(gst_video_test_src_get_times), (gst_video_test_src_create):
* sys/ximage/ximagesink.c: (gst_ximagesink_get_times):
Use gst_util_uint64_scale_int in _get_times().
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_sync_method_get_type),
(gst_multi_fd_sink_class_init):
Updates, fixes, and typo corrections for multifdsink. No functional
changes.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find):
Don't crash on truncated files - check that we got an 8 byte buffer
before trying to memcmp it.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (get_active_source):
Make stream-switching appear instant to the application
(ie. make sure that a g_object_get on 'current-foo' returns
the stream previously set with g_object_set(). Totem needs
this to update stream-related meta-info (like audio-codec)
correctly when switching streams.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (set_structure_widths),
(gst_audio_convert_transform_caps):
Get structure-name just once.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c:
Add docs about icydemux usage in connection with gnomevfssrc
* ext/libvisual/visual.c:
* ext/ogg/gstoggaviparse.c:
* ext/ogg/gstoggdemux.c:
* ext/ogg/gstoggmux.c:
* ext/ogg/gstoggparse.c:
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
* gst-libs/gst/audio/gstaudiosink.c:
* gst-libs/gst/audio/gstaudiosrc.c:
* gst/audiorate/gstaudiorate.c:
More G_OBJECT macro fixing.
* gst/audiotestsrc/gstaudiotestsrc.h:
Fix wrong info in header due to copy & paste
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_init), (fill_buffer), (check_queue),
(queue_threshold_reached), (gst_play_base_bin_set_property),
(gst_play_base_bin_get_property):
* gst/playback/gstplaybasebin.h:
Don't use a 0 low watermark when buffering, it is catching starvation
way too late. Instead, use a 3 second queue with 30 and 95
percent low/high watermarks.
Added queue-min-threshold property to configure low watermark.
Use new _buffering message API.
Make queue_threshold variable big enough to store a uint64 time value.
API: playbin::queue-min-threshold property.
Original commit message from CVS:
patch by: Michael Smith <msmith at fluendo dot com>
* gst/tcp/gstmultifdsink.c: (is_sync_frame),
(gst_multi_fd_sink_client_queue_buffer),
(gst_multi_fd_sink_new_client):
* tests/check/elements/multifdsink.c: (GST_START_TEST),
(multifdsink_suite):
Fix implementation of sync-method 'next-keyframe'
Original commit message from CVS:
* gst/videotestsrc/videotestsrc.c: (paintinfo_find_by_structure),
(paint_get_structure), (gst_video_test_src_get_size),
(gst_video_test_src_smpte), (gst_video_test_src_snow),
(gst_video_test_src_unicolor), (paint_setup_AYUV),
(paint_hline_AYUV), (paint_setup_ARGB8888), (paint_setup_ABGR8888),
(paint_setup_RGBA8888), (paint_setup_BGRA8888), (paint_hline_str4):
* gst/videotestsrc/videotestsrc.h:
Add support for AYUV and the various RGBA formats. Initialise
fields of paintinfo structs allocated on the stack.
* tests/check/elements/videotestsrc.c: (right_shift_colour),
(fix_expected_colour), (check_rgb_buf), (got_buf_cb),
(GST_START_TEST), (videotestsrc_suite):
Add unit tests for videotestsrc's RGB output.
Original commit message from CVS:
* gst/adder/gstadder.c: (forward_event_func),
(gst_adder_src_event), (gst_adder_collected),
(gst_adder_change_state):
* gst/adder/gstadder.h:
Remember the start position asked in the incoming seeks, so we can
output GST_EVENT_NEW_SEGMENT with a correct position value (instead
of assuming it will always be 0).
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_unit_size):
Return FALSE instead of returning a random false unit
size when the format isn't known/supported (even if
this shouldn't happen under normal circumstances).
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
Don't rely on incoming buffers offset anymore, since it is completely
broken when using multiple segments.
Instead convert the incoming buffers timestamp to running time, and
then convert that value to the offsets.
Also inform GstSegment of the last outputted stop position, which is
needed if we received several segments with an unknown stop value.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_sink_event),
(gst_audio_rate_chain):
Make the metadata of the buffer writable before changing its
flags.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_reset),
(gst_audio_rate_setcaps), (gst_audio_rate_init),
(gst_audio_rate_sink_event), (gst_audio_rate_src_event),
(gst_audio_rate_chain), (gst_audio_rate_change_state):
Fix audiorate some more.
Reset and resync counters on flush and READY.
Handle the DISCONT flag correctly.
Use GstSegment to track position.
Fail when not negotiated.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_render):
Small cleanups.
If a buffer is received with no caps, make the buffer metadata
writable and set the caps, making sure that we don't screw up the
refcounts.
Original commit message from CVS:
* gst/gdp/gstgdppay.c: (gst_gdp_pay_reset),
(gst_gdp_pay_reset_streamheader), (gst_gdp_pay_chain):
Fix memory leaks and misleading debug messages, add a couple of
comments.
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_get_stats),
(gst_multi_fd_sink_render):
Do not use gst_buffer_make_writable() in a basesink render method,
as it may incorrectly unref the buffer. Instead, use convoluted
dance to avoid copying the buffer except when we need to.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_get_unit_size), (set_structure_widths):
Lower debug, use g_assert in _get_unit_size
* gst/audioresample/gstaudioresample.c:
(audioresample_get_unit_size):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_unit_size):
* gst/videoscale/gstvideoscale.c: (gst_video_scale_get_unit_size):
use g_assert in _get_unit_size
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(value_list_append_structure_list),
(gst_play_bin_handle_redirect_message),
(gst_play_bin_handle_message):
Add "connection-speed" property; re-order redirect messages with
multiple redirect locations depending on the minimum bitrate if
that information is available and a connection speed is set
(#350399).
Original commit message from CVS:
2006-08-11 Andy Wingo <wingo@pobox.com>
* gst/tcp/gsttcp.h: For now, always disable deprecation here --
fixes the build.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg2_sys_type_find):
The checks here are not even close to anything that would
justify MAXIMUM probability, lowering to POSSIBLE until someone
fixes the checks (case at hand: quicktime redirection files
might start with 00 00 01 XX and pass the checks here just
fine, see #350399).
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon net>
* gst/typefind/gsttypefindfunctions.c: (multipart_type_find):
Better detection for multipart/x-mixed-replace: accept leading
whitespaces before the boundary marker as well (as our very own
multipartmux used to produce) (#349068).
Original commit message from CVS:
2006-08-04 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_chain):
Fix event parsing by gdpdepay. Fixes#349916.
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx net>
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinder for Interplay's MVE format (#348973).
Original commit message from CVS:
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_init),
(gst_gdp_depay_sink_event), (gst_gdp_depay_chain):
Consume all events except EOS because we generate events from
the gdp payload instead. Fixes#349204
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c: (audioresample_stop),
(audioresample_set_caps):
Don't leak references to the incoming caps. Clean them up when
stopping.
* gst/videoscale/gstvideoscale.c: (gst_video_scale_class_init),
(gst_video_scale_finalize):
Don't leak our temporary pixel buffer.
* tests/check/Makefile.am:
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST), (simple_launch_lines_suite):
Fix leaks and re-enable the test for valgrind checking.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon net>
* gst/typefind/gsttypefindfunctions.c: (multipart_type_find),
(plugin_init):
Add typefind function for multipart/x-mixed-replace (#348916).
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_query_duration):
Fix leak in duration query.
Reflow some docs and notes.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_add_full),
(gst_multi_fd_sink_new_client):
debug a little more understandably
do not use goto as a substitute for break, especially if
break is also being used
Original commit message from CVS:
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_init):
proxying get/set caps is the wrong thing to do, since we really
do change caps quite fundamentally
* tests/check/elements/gdpdepay.c:
* tests/check/elements/gdppay.c:
remove declaration of buffers, it's already done in gstcheck.h
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (xml_check_first_element):
Limit search for the first markup tag to the first few kB of
the file. If we don't find one there, it's highly unlikely that
this is an XML(-ish) file.
Original commit message from CVS:
* gst/playback/test.c: (gen_video_element), (gen_audio_element),
(cb_newpad), (main):
Example of a small audio/video player using decodebin.
Original commit message from CVS:
2006-07-17 Thomas Vander Stichele <thomas at apestaart dot org>
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_class_init):
* gst/gdp/gstgdppay.c: (gst_gdp_pay_class_init),
remove parent_class setting, BOILERPLATE does this
(gst_gdp_pay_reset_streamheader):
fix typo in comment
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
add more plugins and elements to docs
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_chain):
fix segfaults due to wrong g_free
add example
* gst/gdp/gstgdppay.c:
add example
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (find_compatibles):
Fix a caps leak when linking (#347304)
* sys/ximage/ximagesink.c: (gst_ximage_buffer_finalize),
(gst_ximagesink_ximage_destroy), (gst_ximagesink_xcontext_clear),
(gst_ximagesink_change_state):
* sys/xvimage/xvimagesink.c: (gst_xvimage_buffer_destroy),
(gst_xvimage_buffer_finalize), (gst_xvimagesink_check_xshm_calls),
(gst_xvimagesink_xvimage_new), (gst_xvimagesink_xvimage_put),
(gst_xvimagesink_xcontext_clear), (gst_xvimagesink_change_state):
Don't leak shared memory resources. Use the object lock to protect
against the xcontext disappearing while returning a buffer from the
pipeline. (#347304)
Original commit message from CVS:
* gst/subparse/gstssaparse.c: (gst_ssa_parse_base_init),
(gst_ssa_parse_parse_line):
Don't include the terminating NUL in the buffer size,
it's only there for extra paranoia (would add random
'*' characters at the end of each subtitle since the
terminator itself is not valid UTF-8 technically).
Also fix indenting after boilerplate macro.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link):
Also emit 'unknown-type' signal (which should really be
called unhandled-type) if we found potential decoders/demuxers
in the registry but none of them worked in the end (as in the
case where the plugins don't exist any longer but are still
listed in the registry). Fixes#329798.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (utf8_type_find),
(xml_check_first_element), (xml_type_find), (smil_type_find):
Fix SMIL typefinding, make xml_check_first_element() more
useful.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_init),
(gst_play_base_bin_finalize), (decodebin_element_added_cb),
(decodebin_element_removed_cb), (gst_play_base_bin_set_property):
* gst/playback/gstplaybasebin.h:
Protect list of elements with a subtitle-encoding property and
the subtitle encoding member itself with a lock of their own
instead of using the object lock. This prevents a dead-lock in
the element-remove callback in some circumstances when shutting
down playbin.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (is_stream), (gen_source_element):
Improve checking if we are dealing with a stream. Added some
more uris that need buffering.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_class_init),
(gst_decode_bin_init), (gst_decode_bin_finalize), (add_fakesink),
(remove_fakesink), (pad_probe), (gst_decode_bin_change_state):
Protect remove_fakesink using a mutex, so that we don't try and
remove the fakesink simultaneously from multiple threads.
When going from READY to PAUSED, restore the fakesink, so that
it is there when decodebin gets reused.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_class_init):
Fix warnings with gst-inspect: "buffers-min" property
should be of G_TYPE_INT and not G_TYPE_INT64. Also fix
typo in property description.
Original commit message from CVS:
Patch by: Philip Jaegenstedt <philip at lysator dot liu dot se>
* gst/videoscale/gstvideoscale.c: (gst_video_scale_prepare_size),
(gst_video_scale_transform):
Make videoscale support RGBA, ARGB, BGRA and ABGR. Fixes#345131
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(gst_audioresample_class_init), (gst_audioresample_init),
(audioresample_start), (audioresample_stop),
(gst_audioresample_set_property), (gst_audioresample_get_property):
Implement GstBaseTransform::start and ::stop so that audioresample
can clear its internal state properly and be reused insted of
causing non-negotiated errors with playbin under some circumstances
(#342789).
* tests/check/elements/audioresample.c: (setup_audioresample),
(cleanup_audioresample):
Need to set element state here so that ::start and ::stop are
called.
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (cb_probe):
Try GST_TAG_CODEC as fallback when extracting the
codec name; more debug info.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* gst/subparse/samiparse.c: (sami_context_pop_state),
(handle_start_font), (end_sami_element):
Honour font face tags in SAMI subtitles (#344503).
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* gst/subparse/samiparse.c: (fix_invalid_entities), (parse_sami):
Fix up broken entities before passing them to libxml *sigh*.
(#343303).
Original commit message from CVS:
* configure.ac:
enable building of GDP elements
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_chain):
* gst/gdp/gstgdppay.c: (gst_gdp_pay_class_init),
(gst_gdp_pay_init), (gst_gdp_buffer_from_caps),
(gst_gdp_pay_buffer_from_buffer), (gst_gdp_buffer_from_event),
(gst_gdp_pay_reset_streamheader), (gst_gdp_pay_sink_event),
(gst_gdp_pay_set_property), (gst_gdp_pay_get_property),
(gst_gdp_pay_change_state):
* gst/gdp/gstgdppay.h:
add version 1.0
Original commit message from CVS:
* gst/tcp/README:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_init),
(gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_client_queue_caps),
(gst_multi_fd_sink_client_queue_buffer),
(gst_multi_fd_sink_handle_client_write),
(gst_multi_fd_sink_render):
* gst/tcp/gstmultifdsink.h:
make multifdsink properly deal with streamheader:
- streamheader is taken from caps
- buffers marked with IN_CAPS are not sent
- streamheaders are sent, on connection, from the caps of the
buffer where the client gets positioned to
- further streamheader changes are done every time the client
will receive a buffer with different caps
* tests/check/elements/multifdsink.c: (GST_START_TEST),
(gst_multifdsink_create_streamheader):
add tests for this
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_create), (group_commit),
(setup_source):
* gst/playback/gstplaybasebin.h:
Make the subtitle detection work from any thread so we don't
deadlock. Fixes#343397.
Original commit message from CVS:
* gst/gdp/gstgdppay.c: (gst_gdp_pay_class_init),
(gst_gdp_pay_init), (gst_gdp_buffer_from_caps),
(gst_gdp_pay_buffer_from_buffer), (gst_gdp_buffer_from_event),
(gst_gdp_pay_reset_streamheader), (gst_gdp_pay_chain),
(gst_gdp_pay_sink_event), (gst_gdp_pay_set_property),
(gst_gdp_pay_get_property):
add crc-header and crc-payload properties
don't error out on some things that are recoverable
* tests/check/elements/gdppay.c: (GST_START_TEST), (gdppay_suite):
add test for crc
Original commit message from CVS:
* gst/volume/Makefile.am:
Seriously, it's not *that* hard to get compilation right. Even
a drunk can do it ! Add LIBOIL CFLAGS and LIBS
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_choose_func),
(volume_update_real_volume), (gst_volume_class_init),
(gst_volume_init), (volume_process_float), (volume_process_int16),
(volume_process_int16_clamp), (volume_set_caps),
(volume_transform_ip), (plugin_init):
* gst/volume/gstvolume.h:
rewrite the passthrough check, split _int16 and _int16_clamp, fix
another property desc., remove unused param from process function
* tests/check/elements/volume.c: (volume_suite):
reactivate the passthrough test
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gen_source_element):
Throw a more comprehensible error for rtsp:// URIs (rather
than erroring out with a negotiation error later on) until
we fix playbin to handle rtspsrc etc.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_init), (gst_play_base_bin_dispose),
(set_encoding_element), (decodebin_element_added_cb),
(decodebin_element_removed_cb), (setup_subtitle), (setup_source),
(gst_play_base_bin_set_property), (gst_play_base_bin_get_property):
* gst/playback/gstplaybasebin.h:
Add 'subtitle-encoding' property to playbin, so applications can
force a subtitle encoding for non-UTF8 subtitles (#342268).
* gst/subparse/gstsubparse.c: (gst_sub_parse_class_init),
(gst_sub_parse_set_property):
Rename recently-added 'encoding' property to 'subtitle-encoding'
(so it can be proxied by playbin/decodebin in a generic way
with less danger of false positives).
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c: (make_lossless_changes),
(append_with_other_format), (set_structure_widths),
(gst_audio_convert_transform_caps):
Patch from #341562: give more specific audio caps in get_caps, so
that basetransform can make better decisions on what caps to
negotiate.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_get_type):
Make it easier to copy&paste
* gst/volume/Makefile.am:
* gst/volume/gstvolume.c: (volume_update_real_volume),
(gst_volume_set_volume), (gst_volume_set_mute),
(gst_volume_class_init), (volume_process_int16), (volume_set_caps),
(volume_transform_ip), (volume_update_mute),
(volume_update_volume):
* gst/volume/gstvolume.h:
Add own debug category, move duplicate code to helper function, fix
property texts, add more comments and prepare ffor liboil-goodness
* tests/check/Makefile.am:
* tests/check/elements/volume.c: (GST_START_TEST), (volume_suite):
add test for mute and passtrough case, be a bit more verbose to track
failure
* tests/check/generic/states.c: (GST_START_TEST):
catch elements that fail to instantiate
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_smpfmt_to_caps):
Marking caps conversion issues as GST_WARNING is way too verbose,
Moving them to GST_LOG.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (remove_fakesink), (pad_probe):
When there is only one unfinished pad and it receives an event that
doesn't match our requirements, we need to set alldone=FALSE so that
the fakesink is not removed yet.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (qt_type_find):
Added the 'prfl' atom type which MQV (no, it's not a typo) files contain.
Else they play perfectly fine with qtdemux.
Original commit message from CVS:
* ext/theora/theoradec.c:
* ext/theora/theoraenc.c:
* ext/theora/theoraparse.c: (gst_theora_parse_class_init):
* gst/audiorate/gstaudiorate.c:
make more debug catagories static
* tests/check/Makefile.am:
* tests/check/elements/adder.c: (message_received),
(test_event_message_received), (GST_START_TEST),
(test_play_twice_message_received), (adder_suite):
added test case for using element twice, extra bonus points for anyone
who can make these test run reliably
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/tcp/Makefile.am:
fdstresstest doesn't need Gtk+, fix compilation if
gtk is not available (#342566).
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_fixate_caps):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_setcaps):
Use the gstutil scaling function to preserve 64 bits while calculating
output width and height from the display-aspect-ratio. (A continuation
of #341542)
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist chollian net>
* gst/subparse/gstsubparse.c: (gst_sub_parse_dispose),
(gst_sub_parse_class_init), (gst_sub_parse_init),
(gst_sub_parse_set_property), (gst_sub_parse_get_property),
(convert_encoding):
* gst/subparse/gstsubparse.h:
Add 'encoding' property (#341681).
* gst/subparse/samiparse.c: (characters_sami):
Output is pango markup, so we need to escape text
between tags (#342143).
Original commit message from CVS:
2006-05-16 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst/tcp/gsttcp.c: (gst_tcp_socket_read):
Return GST_FLOW_UNEXPECTED when we have an eos on the socket so
basesrc can do its job correctly.
Original commit message from CVS:
2006-05-15 Julien MOUTTE <julien@moutte.net>
* gst/playback/gstdecodebin.c: (cleanup_decodebin),
(gst_decode_bin_change_state): Make decodebin reusable
when going from PAUSE_TO_READY and then back to PAUSED.
Fixes#331678.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect):
Don't use libxml functions in the typefinding code.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect):
Improve SAMI typefinding: handle case where there are
whitespaces or newlines in front of the first <SAMI>
tag (#169936).
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* gst/subparse/samiparse.c: (handle_start_font):
Need to map "silver" colour explicitly (#169936).
Original commit message from CVS:
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_fill_others):
Fix#341696: crash when mixing L+R+C to mono or stereo.
* tests/check/Makefile.am:
* tests/check/elements/audioconvert.c: (set_channel_positions),
(get_float_mc_caps), (get_int_mc_caps), (GST_START_TEST),
(audioconvert_suite):
Add test for the above, including some generic framework bits for
testing multichannel things.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_fixate_caps):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_setcaps):
Fix the build.
Original commit message from CVS:
2006-05-11 Thomas Vander Stichele <thomas at apestaart dot org>
patch by: Sjoerd Simons (sjoerd@luon.net)
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(group_create), (group_destroy), (add_stream),
(gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
* gst/playback/gstplaybasebin.h:
API: GstPlayBaseBin::stream-info-value-array property
use a more bindings-friendly way of exposing streaminfo
using a GValueArray. Tested in ipython.
Closes#341114
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (try_to_link_1), (queue_enlarge),
(queue_underrun_cb), (queue_filled_cb):
Also catch queue underruns but don't do anything yet.
Refactor and comment queue enlarging code a bit.
* gst/playback/gstplaybasebin.c: (queue_overrun),
(queue_threshold_reached), (queue_out_of_data),
(gen_preroll_element):
If a queue over/underruns check that we don't create nasty
deadlocks when the min-threshold is not reached but the
max-bytes is. In those cases disable max-bytes when we
know that the queue is fed timed data.
Add more comments.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_audio_element):
Make playbin automatically plug an 'audioresample'
element before the audio sink as well. This solves
problems with sinks that only accept a very specific
sample rate, like esdsink (e.g. #340379).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gen_source_element):
Make http sources send special headers so that we receive
icecast metadata if the http stream is an icecast stream
(otherwise the server will just ignore them). This also
means that from now on users will need the 'icydemux'
element from gst-plugins-good installed if they want to
listen to icecast radio streams. (#341432, #333657).
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_new_client), (gst_multi_fd_sink_stop):
remove stupid example from docs - it should come with a simple
C program instead.
Clean up/fix docs
* tests/check/elements/multifdsink.c: (wait_bytes_served),
(fail_if_can_read), (GST_START_TEST),
(gst_multifdsink_create_streamheader), (multifdsink_suite):
add a test for changing streamheader which exposes a bug in
multifdsink
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_stop):
clean up the bufqueue when shutting down
* tests/check/Makefile.am:
* tests/check/elements/multifdsink.c: (setup_multifdsink),
(cleanup_multifdsink), (GST_START_TEST), (multifdsink_suite),
(main):
add a test for the leak that was just fixed
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_query_duration), (gst_adder_query), (forward_event),
(gst_adder_src_event), (gst_adder_sink_event),
(gst_adder_class_init), (gst_adder_finalize),
(gst_adder_request_new_pad), (gst_adder_collected):
* gst/adder/gstadder.h:
Updated some docs. Added comments and FIXMEs all over the place.
Improve debugging info.
Fix leak on finalize by not calling the parent.
Implement duration query.
Make event forwarding threadsafe.
Correctly send NEWSEGMENT at start and after flush.
Handle EOS correctly.
Post error when not negotiated.
* tests/check/elements/adder.c: (GST_START_TEST):
Added FIXME in the test.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon net>
* gst/tcp/gstmultifdsink.c: (gst_client_status_get_type):
Register nick for enum value (#341160).
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_request_new_pad),
(gst_adder_collected):
* gst/adder/gstadder.h:
Remove bogus segment merging and forwarding, we don't
care about timestamps anyway and we just produce a
continuous stream.
Also create a nice NEWSEGMENT event when we start.
Use _scale_int some more.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp4_find_box),
(mp4_type_find), (plugin_init):
Add typefind to distinguish between "audio/x-m4a" and new type
"video/mp4". Fixes#340375
* tests/check/elements/adder.c: (adder_suite):
Raise timeout to make buildbot happy
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_sink_event),
(gst_adder_request_new_pad), (gst_adder_change_state):
* gst/adder/gstadder.h:
* tests/check/Makefile.am:
* tests/check/elements/adder.c: (event_loop), (GST_START_TEST),
(adder_suite), (main):
Add sink-event handling to adder. It tries to merge incomming
newsegment-events. Added test to check if segment_done is comming
through.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg2_sys_type_find),
(mpeg1_sys_type_find), (ogganx_type_find), (sw_data_destroy):
Rearrange MPEG system stream detection, fixing some memleaks in the
process.
Constify the data for STARTS_WITH and RIFF helper handlers. Make sure
they clean up their data correctly.
Remove unused ogganx caps and move the 'is_annodex' check to inside
the 'is_ogg' if statement.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find_at_offset),
(mpeg_ts_probe_headers), (mpeg_ts_type_find):
When typefinding an MP3 in push-based mode, don't penalise the
probability down to 74% when we found 5 valid frames just because we
can't peek the end of the file.
Make the probability for detecting MPEG Transport Streams based on the
number of sequential headers we successfully detected.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_funcfind), (volume_set_caps),
(volume_transform_ip):
Increase "volume" property to 10.0. Fixes#340369.
Set the process function to NULL when capsnego fails so that
we properly error out.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (musepack_type_find),
(plugin_init):
Refine musepack typefinding a bit. Return MAXIMUM
probability when we detect stream version 7 to make
sure the mpeg audio typefinder doesn't trump us.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps), (gst_adder_src_event),
(gst_adder_init):
send events from src-pad to all sink-pads fixes#338657
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_class_init),
(gst_multi_fd_sink_remove_client_link):
* gst/tcp/gstmultifdsink.h:
Fix race condition in multifdsink that can lead to spurious
duplicate clients. this patch adds a new signal that is fired when
multifdsink has removed all references to the fd.
Fixes#339574.
Updated documentation.
API: client-fd-removed signal added
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_get_stats):
When asking g_value_array_new to prealloc elements, we may as well
ask for the right number of elements.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_reset),
(gst_video_rate_swap_prev), (gst_video_rate_chain):
fix up docs
fix a leak when no caps negotiated
fix counting of input frames
* tests/check/elements/.cvsignore:
* tests/check/elements/videorate.c: (assert_videorate_stats),
(GST_START_TEST), (videorate_suite):
add tests for these
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c: (gst_audioresample_init),
(resample_set_state_from_caps):
Add support for other formats audioresample can handle such as
32 bits in and float and 64 bits float. Fixes#301759
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (wavpack_type_find):
Fix wavpack typefinding to work in more cases (don't peek
for chunks of multiple hundred kBs at once, but process
things step-by-step in smaller units). Fixes#339786.
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
* tests/check/Makefile.am:
* tests/check/elements/videorate.c: (assert_videorate_stats),
(setup_videorate), (cleanup_videorate), (GST_START_TEST),
(videorate_suite), (main):
Fix an infinite loop if frames are passed in with wrongly ordered
timestamps. Fixes#339013.
Original commit message from CVS:
Patch by: Tim-Philipp Müller <tim at centricular dot net>
* gst/typefind/gsttypefindfunctions.c: (qt_type_find):
fix typefinding on some ISO files. Fixes#339212.
Original commit message from CVS:
Patch by: Jan Schmidt
* gst/playback/gststreamselector.c:
(gst_stream_selector_bufferalloc):
Restore old StreamSelector behaviour.
Fixes#338419.
Original commit message from CVS:
* gst/audioresample/debug.h:
replace debug macros with variable number of parameters
by a simple alias to gstreamer standard debug macros
(#define RESAMPLE_ERROR GST_ERROR, __VA_ARGS__ is not
supported by MSVC 6.0 and 7.1)
* gst/audioresample/resample.h:
define M_PI and rint for WIN32
* win32/common/libgstaudio.def:
* win32/common/libgstriff.def:
* win32/common/libgsttag.def:
* win32/common/libgstvideo.def:
add new exported functions
* win32/vs6:
update project files
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_destroy):
Clean up our group elements properly in the case where it never
got committed - it still got added unconditionally to the bin.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (mute_stream), (setup_substreams):
Don't remove our mute-probe if someone else already did so.
Don't set a 2nd one if there is already one pending on the pad.
* gst/playback/gstplaybin.c: (gst_play_bin_send_event_to_sink),
(do_playbin_seek):
When a seek fails, ensure that playbin is still set back to playing.
* gst/typefind/gsttypefindfunctions.c: (mpeg_ts_probe_headers),
(mpeg_ts_type_find), (plugin_init):
Add a typefind function for mpeg-ts streams.
Original commit message from CVS:
2006-04-06 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_reset)
(gst_video_rate_init): Caps-related parameters should not be reset
by a flush -- move their inits to the instance init function.
(gst_video_rate_flush_prev): Don't complain if gst_pad_push
is not OK, just return the result.
* gst/audiotestsrc/gstaudiotestsrc.c
(gst_audio_test_src_class_init)
(gst_audio_test_src_get_times): Re-enable is-live=true, as was
broken by Stefan's commit on 24 March.
Original commit message from CVS:
2006-04-04 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev):
Whoops, fix bug introduced. Bad hacker!
Original commit message from CVS:
2006-04-04 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev):
Properly handle the case where you get EOS before any buffers are
received. Use gst_buffer_make_metadata_writable where appropriate.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_video_element),
(gen_text_element), (gen_audio_element), (gen_vis_element):
Error out gracefully when we can't create any of the usual
conversion elements for some reason. Also, don't try to
create an audioscale (sic) element that's not used anyway.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
Don't post RESOURCE_NOT_FOUND error when we can't find a source
element for a particular protocol, that's confusing for users.
Instead, post a RESOURCE_FAILED error, so that our own error
message is actually shown in totem etc. (#336303).
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (convert_encoding),
(gst_sub_parse_change_state):
* gst/subparse/gstsubparse.h:
Text subtitle files may or may not be UTF-8. If it's not, we
don't really want to see '?' characters in place of non-ASCII
characters like accented characters. So let's assume the input
is UTF-8 until we come across text that is clearly not. If it's
not UTF-8, we don't really know what it is, so try the following:
(a) see whether the GST_SUBTITLE_ENCODING environment variable
is set; if not, check (b) if the current locale encoding is
non-UTF-8 and use that if it is, or (c) assume ISO-8859-15 if
the current locale encoding is UTF-8 and the environment variable
was not set to any particular encoding. Not perfect, but better
than nothing (and better than before, I think) (fixes#172848).
Original commit message from CVS:
* ext/ogg/gstoggmux.c: (gst_ogg_mux_init):
* gst/adder/gstadder.c: (gst_adder_init):
use DEBUG_FUNCPTR for collectpads
Original commit message from CVS:
Patch by: Julien MOUTTE <julien at moutte dot net>
* gst/videotestsrc/gstvideotestsrc.c: (gst_video_test_src_query),
(gst_video_test_src_do_seek), (gst_video_test_src_create):
Partially handle 0 framerate, only EOS after the first frame
is missing.
Original commit message from CVS:
Patch by: Fabrizio Gennari <fabrizio dot ge at tiscali dot it>
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_video_caps),
(gst_riff_create_video_template_caps):
* gst/ffmpegcolorspace/avcodec.h:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt),
(gst_ffmpegcsp_avpicture_fill):
* gst/ffmpegcolorspace/imgconvert.c:
Patch for support of YVU9 AVI files (#334822)
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (id3v2_type_find),
(id3v1_type_find), (apetag_type_find), (plugin_init):
Can't do tag preferences via probability, as tags would then
lose against types that are recognised with MAXIMUM probability
(like .wav); so let all tag typefinders return MAXIMUM themselves
and order them via the rank. Split ID3v1 and ID3v2 typefinders so
that we can prefer APE to ID3v1 (fixes#335028).
Original commit message from CVS:
* gst/playback/gststreamselector.c:
(gst_stream_selector_set_property),
(gst_stream_selector_bufferalloc):
Preserve the existing buggy streamselector behaviour by performing
a fallback buffer allocation when downstream isn't linked yet.
This should really be fixed in playbin by blocking pads until it's
linked them.
Also, use gst_pad_alloc_buffer instead of
gst_pad_alloc_buffer_and_set.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_finalise):
Chain up to the parent finalize method.
Add 32-bit sample size to the template caps.
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_video_caps),
(gst_riff_create_video_template_caps):
Add the fourcc that the VMWare codec uses.
* gst/playback/gststreamselector.c:
(gst_stream_selector_set_property),
(gst_stream_selector_bufferalloc),
(gst_stream_selector_request_new_pad):
For the active pad, forward buffer-alloc requests, otherwise
return GST_FLOW_NOT_LINKED. This also prevents xvimagesink
having to memcpy every frame when used by playbin.
* gst/tcp/gstmultifdsink.c:
(gst_multi_fd_sink_handle_client_write):
Get negotiated caps from the sink pad, rather than the sink
pad's peer.
Original commit message from CVS:
Patch by: Sebastien Moutte <sebastien moutte net>
* gst/ffmpegcolorspace/gstffmpegcodecmap.c: (gst_ff_vid_caps_new),
(gst_ff_aud_caps_new), (gst_ffmpeg_pixfmt_to_caps),
(gst_ffmpeg_smpfmt_to_caps):
Replace __VA_ARGS__ caps creation macros with varargs functions.
Makes things compile on MSVC (#320765), looks nicer, and we can
tell the compiler to check for the NULL terminator.
Original commit message from CVS:
* gst-libs/gst/video/gstvideofilter.c: (gst_video_filter_init):
* gst-libs/gst/video/gstvideosink.c: (gst_video_sink_init):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c: (gst_ffmpegcsp_init):
* gst/videoscale/gstvideoscale.c: (gst_video_scale_class_init),
(gst_video_scale_init), (gst_video_scale_src_event):
Re-enable QoS after the release.
Rework videoscale to use the base class src_event handler.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
NULL-terminate array of mpeg4 video file extensions.
Fixes crash on PPC (#334226).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find_at_offset):
Fix invalid memory access to region before peek'd data (#332964).
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (gst_subparse_type_find):
Fix invalid memory access: make sure string passed to
regexec() is NUL-termianted.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find_at_offset),
(mp3_type_find):
Refactor mpeg/audio typefinding to make it more maintainable
and easier to fine-tune. Make probing into middle of the file
work properly (fixes#333900, also see #152688).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c:
(utf8_type_find_have_valid_utf8_at_offset):
Remove part from previous commit that was bogus:
g_utf8_validate() does in fact not accept embedded
zeroes, so we don't need to check for those (thanks
to Mike for the hint).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c:
(utf8_type_find_count_embedded_zeroes),
(utf8_type_find_have_valid_utf8_at_offset), (utf8_type_find):
Make plain/text typefinder more conservative: firstly, check
for embedded zeroes, which are perfectly valid UTF-8 characters,
but also a fairly good sign that something is not a plain text
file; secondly, probe into the middle of the file if possible.
If we can't probe into the middle, limit the probability value
to be returned to TYPE_FIND_POSSIBLE (see #333900).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Give id3 and ape tag typefinders a rank slightly higher
than PRIMARY to ensure they're always run before any of
the other typefinders (in particular wav and mp3) (#324186).
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-docs.sgml:
* docs/libs/gst-plugins-base-libs-sections.txt:
* docs/libs/gst-plugins-base-libs.types:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
Added some more docs to libs and plugins.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read), (gst_ring_buffer_clear):
* gst-libs/gst/audio/gstringbuffer.h:
Document ringbuffer some more.
* gst/videorate/gstvideorate.c: (gst_video_rate_class_init),
(gst_video_rate_setcaps), (gst_video_rate_reset),
(gst_video_rate_init), (gst_video_rate_flush_prev),
(gst_video_rate_swap_prev), (gst_video_rate_event),
(gst_video_rate_chain), (gst_video_rate_change_state):
* gst/videorate/gstvideorate.h:
Fix videorate to use segments.
Make it work with 0/1 framerates (closes#331903)
Handle EOS correctly.
Added docs.
Original commit message from CVS:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins.args:
* docs/plugins/gst-plugins-base-plugins.hierarchy:
* docs/plugins/gst-plugins-base-plugins.interfaces:
* docs/plugins/gst-plugins-base-plugins.signals:
Fix hierarchy, added some more elements to the docs.
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_type):
* gst/ffmpegcolorspace/gstffmpegcolorspace.h:
Fix docs for ffmpegcolorspace.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (id3_type_find),
(apetag_type_find), (ape_type_find), (plugin_init):
Some typefinding fine-tuning:
- rank ID3/APE tags in order of preference via probabilities, so that
ID3v2 > APEv2 > APEv1 > ID3v1.
- three or four bytes don't really justify MAXIMUM probability,
change those to 'very likely' (musepack and monkeysaudio).
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
added defines of M_PI and M_PI_2
* gst/ffmpegcolorspace/avcodec.h:
removed #include "stdint.h" for win32 as _stdint.h is
autogenerated to win32/common
* win32/common/libgstaudio.def:
* win32/common/libgsttag.def:
added some exports
* win32/vs6:
some project files bugs corrected
* win32/vs7:
project files are reset to the default vs7 configuration
(they link to msvcr71.dll using default optimizations)
Original commit message from CVS:
* gst/videoscale/vs_scanline.c:
(vs_scanline_resample_nearest_RGBA):
Revert optimization in videoscale. It should go in liboil and have
an appropriate liboil function.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_transform):
Don't ignore return code from ffmpeg convert function.
* gst/ffmpegcolorspace/imgconvert.c: (img_convert):
Split out some long statements to ease debugging.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mpeg4_video_type_find),
(cmml_type_find), (plugin_init):
Fix CMML type find function to not require a specific minor version
of the CMML header.
Add an MPEG4 video elementary stream typefind function.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_caps_remove_format_info),
(gst_ffmpegcsp_get_unit_size):
The 'palette_data' field from incoming RGB caps shouldn't be
proxied on outgoing YUV caps; also, restrict unit size
adjustment in case of paletted data only to the unit that
actually has a palette. Fixes#330711.
Original commit message from CVS:
Reviewed by : Edward Hervey <edward@fluendo.com>
* gst/typefind/gsttypefindfunctions.c: (q3gp_type_find),
(qt_type_find):
Better 3gp typefinding.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c: (gst_gnome_vfs_src_create):
Don't send EOS event here, the base class will send one for us.
* gst/playback/gstplaybasebin.c: (prepare_output):
Subpictures without video stream aren't allowed either.
* gst/subparse/gstsubparse.c: (gst_subparse_type_find):
Fix debug statement copy'n'paste-o.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (subrip_unescape_formatting),
(parse_subrip), (gst_sub_parse_format_autodetect):
Set right caps given that we send escaped text. Also,
honour <i></i>, <b></b> and <u></u> markers that can be found
in .srt files (fixes#310202).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (get_our_ghost_pad),
(remove_element_chain), (cleanup_decodebin),
(gst_decode_bin_change_state): Make decodebin reusable by
fixing remove_element_chain first and then introduce a
cleaner in state change to ->NULL. (Closes#331678)
------------------------------------------------------
Original commit message from CVS:
2006-02-19 Julien MOUTTE <julien@moutte.net>
* gst/playback/gstdecodebin.c: (mimetype_is_raw): pango layout
should be considered as row.
Original commit message from CVS:
2006-02-18 Julien MOUTTE <julien@moutte.net>
* ext/pango/gsttextoverlay.c: (gst_text_overlay_base_init),
(gst_text_overlay_finalize), (gst_text_overlay_init),
(gst_text_overlay_setcaps), (gst_text_overlay_src_event),
(gst_text_overlay_render_text),
(gst_text_overlay_text_pad_link),
(gst_text_overlay_text_pad_unlink),
(gst_text_overlay_text_event),
(gst_text_overlay_video_event), (gst_text_overlay_pop_text),
(gst_text_overlay_text_chain), (gst_text_overlay_video_chain),
(gst_text_overlay_change_state): Refactoring of textoverlay
without collectpads. This now supports sparse subtitles coming
from a demuxer instead of a sub file. Seeking is still broken
though. Need to discuss with wtay some more on how to handle
seeking correctly.
* ext/pango/gsttextoverlay.h:
* gst/playback/gstplaybin.c: (setup_sinks): Support linking with
subtitles coming from the demuxer.
Original commit message from CVS:
Reviewed by Edward Hervey <edward@fluendo.com>
* gst/videoscale/vs_scanline.c: (vs_scanline_resample_nearest_RGBA):
C-level optimization of the RGBA nearest neighbour function.
Eventually this might end up in liboil with vectorized versions.
Original commit message from CVS:
* gst/audioconvert/plugin.c: (plugin_init):
Register the GstAudioChannelPosition enum type with the type
system in the plugin_init function, so that it is known before
any element actually makes use of multi-channel stuff. This is
required for example if one wants to be able to deserialise/use
a caps string with channel positions before any pipeline has
been setup and started, like with gst-launch.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_vis_element):
Update vis bin docs.
Move queue after tee so we don't queue video buffers but
audio samples instead. Fixes problems where the video queue
is filled and the audio queue empty.
Original commit message from CVS:
* gst/tcp/gsttcpclientsrc.c: (gst_tcp_client_src_create):
Revert Andy's newsegment change pending a more correct
fix.
Original commit message from CVS:
:
* gst/typefind/gsttypefindfunctions.c: (q3gp_type_find),
(qt_type_find), (plugin_init):
detect more files as 3gp
group and reorder the iso file formats
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find):
In case we can't find the required number of consecutive
mpeg audio frames to positively identify an MPEG audio
stream, check if there's at least a valid mpeg audio
frame right at offset 0 and if so suggest mpeg/audio
caps with a very low probability (#153004).
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* gst/tcp/gsttcpclientsrc.c (gst_tcp_client_src_create): Switch to
a TIME segment if we get timestamped buffers. Requires recent
fixes in core to work properly.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (prepare_output):
Don't print the URI as part of the error message, it
makes error dialogs look rather ugly, especially if
the URI is very long or has characters in it that
need escaping.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (prepare_output):
Error out if we have only text or subtitles, but nothing
else. Also error out if we have subtitles but no video
stream.
Original commit message from CVS:
2006-02-06 Julien MOUTTE <julien@moutte.net>
* ext/pango/gsttextoverlay.c: (gst_text_overlay_src_event):
Stick to seeking theory until i find the bug.
* gst/subparse/gstsubparse.c: (parse_subrip): Fix debug.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (try_to_link_1):
Don't put essential function call into
g_return_*() macro, otherwise it'll all be
replaced by NOOPs when compiling with
G_DISABLE_CHECKS defined.
Original commit message from CVS:
* gst/playback/test6.c: (new_decoded_pad_cb), (show_error), (main):
Make test work again by connecting fakesinks to each decoded pad,
which makes the pipeline wait until each fakesink has a buffer
queued before going to PAUSED state. At that point we know the
decodebin pads are negotiated.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (au_type_find),
(paris_type_find), (ilbc_type_find), (plugin_init):
Fix typefinding for audio/x-au, audio/x-paris and
audio/iLBC-sh. We cannot use the START_WITH macros
here, because there can only be one typefind factory
with the same name (caps), so the second one would
replace the first one and the first one would never
be called when doing typefinding (see #161712).
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_create_sine_table), (plugin_init):
* gst/volume/gstvolume.c: (plugin_init):
initialize gst_controller before using
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt):
Patch from Eric Jonas to support conversions to/from UYVY
(Fixes: #324626)
Original commit message from CVS:
* gst-libs/gst/audio/audio.h: (GST_CLOCK_TIME_TO_FRAMES)
* gst-libs/gst/audio/gstbaseaudiosink.c: (gst_base_audio_sink_render)
use of gst_guint64_to_gdouble to be compliant with vs6
* gst/playback/gstdecodebin.c: (try_to_link_1)
* gst/videorate/videorate.c: (gst_video_rate_blank_data)
use of G_GINT64_CONSTANT for int64 constants
* win32/common/libgstinterfaces.def:
export some symbols (gst_mixer_get_type,gst_mixer_track_get_type)
* win32/vs6:
update and add new project files
Original commit message from CVS:
* gst/videoscale/vs_scanline.c: Oops, *that's* why I never
checked in this change -- it requires liboil features not
in 0.3.6. Revert parts.
Original commit message from CVS:
* ext/alsa/gstalsaplugin.c: (plugin_init):
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_base_init), (plugin_init):
* ext/gnomevfs/gstgnomevfs.c: (plugin_init):
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_plugin_init):
- a library should not call setlocale. see Libraries node in
gettext manual
- make sure all plugins that use translation do bindtextdomain
to point to the localedir
* gst/playback/gstplaybin.c: (gen_vis_element), (add_sink),
(setup_sinks), (plugin_init):
all this, and check for NULL when creating sinks
Original commit message from CVS:
2006-01-27 Julien MOUTTE <julien@moutte.net>
* gst/subparse/gstsubparse.c: (gst_subparse_type_find),
(plugin_init): Make typefinding of subtitles work again.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (aac_type_find),
(mp3_type_frame_length_from_header), (mp3_type_find),
(wavpack_type_find), (m4a_type_find), (ircam_type_find),
(plugin_init):
Backport a bunch of typefinding fixes from the 0.8 branch.
Also, improve wavpack typefinding: if we can't peek the
entire wavpack block, try to parse the bits we can get and
see if we find what we're looking for in those.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (pad_probe):
Also consider the flush-start and tag events as unblockers
for the pad probes.
Original commit message from CVS:
2006-01-26 Julien MOUTTE <julien@moutte.net>
* gst/playback/gstplaybin.c: (gst_play_bin_init),
(gst_play_bin_dispose), (gst_play_bin_vis_unblocked),
(gst_play_bin_vis_blocked), (gst_play_bin_set_property):
On the fly visualisation switch, works disabling, enabling as
well but it won't be able to enable vis in a playbin that was
created with no visualisation.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(free_pad_probes), (remove_fakesink), (pad_probe),
(close_pad_link), (gst_decode_bin_change_state):
Replace GstPadBlockCallback with pad probes that detect
first buffer AND eos before removing fakesink.
Fixes hang with demuxers doing EOS while pre-rolling.
Solves #328279
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (gst_stream_info_set_mute):
* gst/playback/gststreamselector.c:
(gst_stream_selector_set_property):
Comment out broken code that connects to the state-changed signal.
At this point, changing current stream selection is broken, but
stuff like gst-launch playbin current-audio=1 works and filters
to the chosen stream.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
Fix playback for sources that emit raw audio or
raw video streams (e.g.: cd audio sources) (#325984).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_destroy),
(probe_triggered), (new_decoded_pad), (mute_group_type),
(set_active_source):
* gst/playback/gststreaminfo.c: (gst_stream_info_set_mute):
* gst/playback/gststreamselector.c:
(gst_stream_selector_base_init),
(gst_stream_selector_set_property),
(gst_stream_selector_request_new_pad):
Reenable stream selection. These mechanisms need a complete overhaul
in the face of 0.8->0.10 changes though.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain),
(gst_audio_rate_change_state), (plugin_init):
Add debugging category.
Fix type issues.
Add case for incoming buffers without valid offset/offset_end.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_audio_element):
Don't leak an autoaudiosink/alsasink when we generate
a new audio element. (old code, I guess)
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_setcaps):
Support float audio in audiorate.
Use width rather than depth for selecting sample width.
Original commit message from CVS:
* gst/videotestsrc/videotestsrc.h:
Use GLib types here (that way we don't have to include the
generated _stdint.h header, which makes life easier for win32
folks that don't use autotools for the build) (#325990, patch
by: Sergey Scobich).
Original commit message from CVS:
* gst/audioresample/resample.h:
Declare struct _ResampleState.buffer as unsigned char *, not void *,
since we do arithmetic on it.
Original commit message from CVS:
* configure.ac:
* gst/volume/Makefile.am:
* gst/volume/demo.c:
move old example to tests/examples/volume/volune.c
* tests/examples/Makefile.am:
* tests/examples/seek/seek.c: (main):
change window-close event from "delete-event" to "destroy"
* tests/examples/volume/Makefile.am:
* tests/examples/volume/volume.c: (value_changed_callback),
(setup_gui), (message_received), (eos_message_received), (main):
fix event handling and bus usage
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (new_pad):
Fix non-C89 variable declaration not at the start of a block. Should
help some compilers.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
(gst_video_test_src_class_init), (gst_video_test_src_start):
Add start method to reset running time and number of frames sent
when starting up (fixes#324696; patch by: Michal Benes).
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_deactivate_current_chain),
(gst_ogg_demux_activate_chain):
Extra debug output when activating/deactivating chains.
* gst/playback/gstdecodebin.c: (gst_decode_bin_factory_filter),
(is_demuxer_element), (try_to_link_1), (remove_element_chain),
(unlinked):
Remove a queue from our list when it becomes unlinked.
Don't add queues to elements in class 'Demux' if they
can only produce one pad
Original commit message from CVS:
* ext/libvisual/visual.c: (make_valid_name):
change some char* into char[]
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_class_init), (gst_audio_test_src_do_seek),
(gst_audio_test_src_create):
* gst/audiotestsrc/gstaudiotestsrc.h:
prepare to handle EOS and SEGMENT_DONE
Original commit message from CVS:
* gst/tcp/gsttcp.c:
* gst/tcp/gsttcpclientsink.c:
* gst/tcp/gsttcpserversink.c:
* gst/tcp/gsttcpserversrc.c:
Add <string.h> includes for memset and FD_ZERO (fixes#323878;
patch by: Benjamin Pineau).
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_blank_data),
(gst_video_rate_chain):
Fix timestamping for videorate when the first buffer it sees has a
non-zero timestamp. Fix some misleading debug output.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
* gst/playback/gstplaybin.c: (handoff):
Make sure the video frame buffer we return to apps via the
"frame" property always has caps set on it. Modify
_gst_gvalue_set_object() macro to handle NULL objects
gracefully too.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_class_init), (gst_audio_test_src_init),
(gst_audio_test_src_setcaps), (gst_audio_test_src_src_query),
(gst_audio_test_src_do_seek), (gst_audio_test_src_is_seekable),
(gst_audio_test_src_create):
* gst/audiotestsrc/gstaudiotestsrc.h:
Adjust to some recent api changes and add wtays new cool seeking
capabillities
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (gst_sub_parse_init),
(gst_sub_parse_do_seek), (gst_sub_parse_src_event), (parse_subrip),
(parser_state_init), (handle_buffer), (gst_sub_parse_chain),
(gst_sub_parse_sink_event), (gst_sub_parse_change_state):
Implement some sort of event handling that doesn't rely on
g_return_if_fail; make sure we always push the last chunk of an
.srt out when we receive an EOS; use gst_pad_alloc_buffer; fix
state change function; remove some old cruft. Seeking is still
rather unlikely to work though.
* tools/.cvsignore:
Ignore more.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_get_property):
* gst/playback/gstplaybin.c: (gst_play_bin_get_property):
Work around refcount problem with g_value_set_object() that occur
if the core has been compiled against GLib-2.6 (g_value_set_object()
will only g_object_ref() the element, but the caller will
gst_object_unref() it and bad things will happen due to the way
GstObjects are refcounted in the GLib-2.6 case). Fixes problems with
totem for people on FC4 using Thomas's 0.10 RPMs.
Original commit message from CVS:
* gst/playback/gststreamselector.c: (gst_stream_selector_chain):
3rd time's the charm. Correct ref-counting for discarded buffers.
Original commit message from CVS:
* gst/playback/gststreamselector.c:
(gst_stream_selector_class_init), (gst_stream_selector_init),
(gst_stream_selector_dispose), (gst_stream_selector_set_property),
(gst_stream_selector_get_property),
(gst_stream_selector_get_linked_pad),
(gst_stream_selector_request_new_pad), (gst_stream_selector_chain):
* gst/playback/gststreamselector.h:
Add the active-pad property for playbin to use shortly. Ignore buffers
from any other pad, returning GST_FLOW_NOT_LINKED
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(try_to_link_1), (queue_filled_cb):
Better use of the queues. Start with a small size queue and only increase
the size of the queues when the other queues are empty.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit), (probe_triggered):
* gst/playback/gstplaybasebin.h:
Prepare to handle errors betters.
* gst/playback/gstplaybin.c: (add_sink), (setup_sinks):
Set sinks to PAUSED first before adding and linking them so that
we don't interrupt dataflow.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_class_init),
(gst_decode_bin_init), (close_pad_link), (try_to_link_1):
Remove unused properties, and add queues between demuxers and decoders
so that a lot more files can preroll properly.
Original commit message from CVS:
* gst-libs/gst/net/Makefile.am:
* gst-libs/gst/rtp/Makefile.am:
* gst-libs/gst/tag/Makefile.am:
remove silly include
* gst/tags/Makefile.am:
* gst/tags/gsttagediting.c:
* gst/tags/gsttageditingprivate.h:
* gst/tags/tagedit.vcproj:
remove directory, is as good as empty
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audiorate_chain):
Properly return GstFlowReturn from gst_pad_push in chain functions.
Original commit message from CVS:
2005-11-24 Andy Wingo <wingo@pobox.com>
* gst/tcp/gstmultifdsink.c (gst_multifdsink_handle_client_write):
Be threadsafe.
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_videorate_chain):
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_create):
Use utility method for scaling clocktime for fractional framerates.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps), (gst_ffmpeg_caps_to_pixfmt):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_caps_remove_format_info):
* gst/ffmpegcolorspace/imgconvert.c:
* gst/ffmpegcolorspace/imgconvert_template.h:
Forward-port fixes from the 0.8 branch (patch by Luca Ognibene,
#318353); use gst_structure_has_name().
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp3_type_find),
(mpeg2_sys_type_find), (mpeg1_sys_type_find),
(mpeg_video_type_find), (mpeg_video_stream_type_find):
Terminate vararg functions with NULL instead of 0 to
make gcc4 happy.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/playback/gstplaybin.c (gen_audio_element)
(gen_video_element): Use the new MISSING_PLUGIN core error
category.
Original commit message from CVS:
* ext/ogg/gstoggmux.c: (gst_ogg_mux_init),
(gst_ogg_mux_request_new_pad), (gst_ogg_mux_queue_pads),
(gst_ogg_mux_clear_collectpads), (gst_ogg_mux_change_state):
* gst/adder/gstadder.c: (gst_adder_init),
(gst_adder_request_new_pad), (gst_adder_collected),
(gst_adder_change_state):
Update for gst_collectpads_foo() to gst_collect_pads_foo()
API change.
Original commit message from CVS:
* gst-libs/gst/tag/Makefile.am:
* gst-libs/gst/tag/gstvorbistag.c:
(gst_tag_list_to_vorbiscomment_buffer):
Remove obsolete vorbistag element and debug category.
* gst/playback/gstplaybasebin.c: (check_queue):
Don't divide by 0 when queue-threshold is 0.
* sys/ximage/ximagesink.c: (gst_ximagesink_set_property):
Don't modify an existing pixel-aspect-ratio if we fail to read
a new one.
Original commit message from CVS:
2005-11-18 Julien MOUTTE <julien@moutte.net>
* gst/videoscale/gstvideoscale.c: (gst_videoscale_class_init),
(gst_videoscale_fixate_caps): Introduce back caps fixate with
handling of PAR.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init):
Unsetting IS_SINK flag from the fakesink, so decodebin
never behaves as a sink.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multifdsink_client_queue_data),
(gst_multifdsink_render):
Don't leak GDP headers when using GDP mode (i.e. tcpserversink).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_audio_element):
Use autoaudiosink, it tends to be more widely available than
autoaudiiosink.
Original commit message from CVS:
2005-11-14 Andy Wingo <wingo@pobox.com>
* gst/playback/gstplaybin.c (gen_audio_element): Use autoaudiosink
as well if it is available. Fixes#316442.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
(gst_videotestsrc_class_init), (gst_videotestsrc_init),
(gst_videotestsrc_src_fixate):
move fixation to a fixate function
remove negotiate function, basesrc's is good enough
fixes a bug for check when using the element alone
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_get_palette), (gst_ffmpeg_set_palette),
(gst_ffmpegcsp_avpicture_fill):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_unit_size), (gst_ffmpegcsp_transform):
Make palettes work again (see #132341). Use our own macros
for rounding up.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit), (new_decoded_pad),
(setup_substreams), (set_active_source):
Unlock GROUP_LOCK in failure cases, so that we don't deadlock when
trying to go to NULL if we failed to read a file.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audiotestsrc_class_init), (gst_audiotestsrc_get_times),
(gst_audiotestsrc_create):
* gst/sine/gstsinesrc.c: (gst_sinesrc_class_init),
(gst_sinesrc_get_times), (gst_sinesrc_create):
* gst/videotestsrc/gstvideotestsrc.c:
(gst_videotestsrc_class_init), (gst_videotestsrc_get_times),
(gst_videotestsrc_create):
The base class can now sync for us.
Original commit message from CVS:
* gst/sine/gstsinesrc.c: (gst_sinesrc_class_init),
(gst_sinesrc_get_query_types), (gst_sinesrc_src_query),
(gst_sinesrc_newsegment):
Send newsegment event in TIME format, set duration if
num-buffers is set, fix duration querying.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/volume/gstvolume.c: (volume_set_caps):
Fix compilation on Solaris with Forte. (#320923)
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(gst_decode_bin_dispose), (free_dynamics), (remove_fakesink),
(pad_blocked), (close_pad_link), (new_pad), (no_more_pads):
Handle the case where a pad_block failed.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.h:
Don't break ABI.
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_caps_to_pixfmt):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_set_caps):
Some more comments.
Handle missing required caps fields better.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query), (gst_adder_collected),
(gst_adder_change_state):
Fix timestamps and fix deadlock when stopping the collectpads.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (audio_convert_clean_context):
When clearing an audioconvert context, set tmpbufsize to zero, so
we'll allocate it again later if required.
This fixes audioconvert re-negotiating formats, which previously
segfaulted with a NULL destination buffer.
Original commit message from CVS:
2005-10-24 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/video/video.h:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
* sys/ximage/ximagesink.c: (gst_ximagesink_xcontext_get):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_get_xv_support):
And
here comes my change on caps for framerate and geometry range.
We are now accepting 1 to MAXINT for width and height, and from
0.0 to MAXDOUBLE for framerate. That allows duration less png
frames
to be blended correctly in videomixer.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(gst_decode_bin_dispose), (free_dynamics), (pad_unblocked),
(pad_blocked), (close_pad_link), (new_pad):
Don't try to remove elements twice.
Original commit message from CVS:
* ext/vorbis/vorbisenc.c: (gst_vorbisenc_get_query_types),
(gst_vorbisenc_src_query):
Implement position and duration queries.
* gst/playback/test3.c: (update_scale), (main):
Fix for async state changes and print nicer output.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audiotestsrc_src_query):
* gst/sine/gstsinesrc.c: (gst_sinesrc_src_query):
Don't use functions for position queries when handling
duration queries.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_destroy),
(gst_play_base_bin_change_state):
Fix leak.
Handle case where playbasebin is now ASYNC because
decodebin is.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (utf8_type_find),
(xml_check_first_element), (xml_type_find), (smil_type_find),
(plugin_init):
Add typefinding for SMIL and for generic XML. Based on patch by
Akos Maroy (#308663).
Original commit message from CVS:
2005-10-17 Andy Wingo <wingo@pobox.com>
* gst/tcp/gstmultifdsink.c: Convert to use the boilerplate macro.
* gst/tcp/gsttcp.c (gst_tcp_socket_read): Comment update.
Original commit message from CVS:
2005-10-17 Julien MOUTTE <julien@moutte.net>
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_unit_size): We are asked to compute a buffer
size
from caps, let's use the caps...
Original commit message from CVS:
2005-10-16 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin.c
(gst_element_set_state_like_a_crazy_man): New kraaaaaaazy
function!
(try_to_link_1): Increase kraziness level.
Original commit message from CVS:
- Don't use non-portable LL suffix on constants, since MSVC doesn't allow
them. These constants all fit into ints anyway.
- Continue to hate nano.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read), (gst_ring_buffer_clear):
Don't assert on normal stuff.
* gst/playback/gstplaybin.c: (do_playbin_seek):
API fix.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_send_event_to_sink),
(do_playbin_seek), (gst_play_bin_send_event):
Override send_event differently, so that we can takes bits of
functionality from GstPipeline (special handling for seeks,
including pausing/resuming, and resetting stream time) and
still get
the appropriate behaviour of only forwarding event to a single
sink,
rather than all of them.
Unfortunately requires a lot of code duplication, but the
alternatives are equally ugly in the end.
Original commit message from CVS:
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_unset_matrix),
(gst_channel_mix_setup_matrix), (gst_channel_mix_mix):
Alloc temp storage somewhere else where we can do it more
portable.
Original commit message from CVS:
* gst/tcp/gsttcpserversrc.c: (gst_tcpserversrc_create),
(gst_tcpserversrc_start):
Don't block in accept while doing the state change, move
to poll and make cancellable.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (wavpack_type_find),
(plugin_init):
Add wavpack and spc typefind functions from 0.8 branch.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (tar_type_find),
(ar_type_find), (msdos_type_find), (plugin_init):
Add typefind functions for tar archives, ar archives,
RAR archives, and msdos-executables (dlls, exe, etc.).
Some of those would be wrongly identified as mpeg
streams of some sort before (#315550).
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query), (gst_adder_class_init),
(gst_adder_init), (gst_adder_request_new_pad),
(gst_adder_change_state):
Add query function to source pad, so adder reports the correct
time/sample position when queried (#315457); fix state change
function; use GST_DEBUG_FUNCPTR() for pad functions.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (utf8_type_find):
Fix leaks in typefind registration
Clean up the gratuitous commenting and whitespacing a little
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multifdsink_class_init),
(gst_multifdsink_finalize), (multifdsink_hash_remove),
(gst_multifdsink_stop):
Fix crasher when going to NULL multiple times.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (remove_groups), (setup_source):
* gst/playback/gstplaybin.c: (remove_sinks), (add_sink),
(setup_sinks), (gst_play_bin_send_event),
(gst_play_bin_change_state):
Set state to NULL before removing from bin. Fix refcounting.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_send_event):
Correct refcounting in send_event() function. Previously was wrong
if the first sink was unable to handle the event.
Original commit message from CVS:
2005-10-03 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin.c (try_to_link_1)
(remove_element_chain): set element to NULL before removing it.
Original commit message from CVS:
2005-09-28 Andy Wingo <wingo@pobox.com>
* gst/videotestsrc/gstvideotestsrc.c: Implement live source mode
and unlocking.
Original commit message from CVS:
2005-09-28 Andy Wingo <wingo@pobox.com>
* gst/tcp/gsttcpclientsink.c (gst_tcpclientsink_base_init):
Actually add the pad template.
(gst_tcpclientsink_get_type): We're a base sink. Woot, works.
* gst/tcp/gsttcpserversrc.c: Go ahead and fix up serversrc while
I'm at it...
Original commit message from CVS:
2005-09-28 Andy Wingo <wingo@pobox.com>
* gst/tcp/gsttcpclientsrc.c: Make interruptable -- code stolen
from fdsrc. Get caps in create() instead of start() so it can be
interrupted. Interruption somewhat untested.
* gst/tcp/gsttcp.c (gst_tcp_read_buffer, gst_tcp_socket_read):
Proper EOS handling.
Original commit message from CVS:
2005-09-27 Andy Wingo <wingo@pobox.com>
* gst/tcp/gsttcpserversrc.c:
* gst/tcp/gsttcpclientsrc.c: Updated for new gsttcp API.
* gst/tcp/gsttcp.h:
* gst/tcp/gsttcp.c (gst_tcp_read_buffer): New function, factored
out of tcpclientsrc.c. Cancellable.
(gst_tcp_socket_read): Made private, cancellable, with better
diagnostics. Also the FIONREAD ioctl takes a int*, not a size_t*.
(gst_tcp_gdp_read_buffer): Made cancellable, actually returns the
whole buffer, and better diagnostics.
(gst_tcp_gdp_read_caps): Same.
* gst/sine/gstsinesrc.c (gst_sinesrc_wait): Add the base time.
Original commit message from CVS:
2005-09-26 Andy Wingo <wingo@pobox.com>
* gst/sine/gstsinesrc.h:
* gst/sine/gstsinesrc.c: Refactor, remove the table lookup code,
change the 'sync' property to 'is-live' and implement it halfway,
update for controller api change.
* gst/volume/gstvolume.c (volume_transform_ip): Update for
controller api change.
Original commit message from CVS:
* gst/audioresample/Makefile.am:
* gst/audioresample/debug.h:
* gst/audioresample/gstaudioresample.c:
* gst/audioresample/resample.c: Convert to using gst debugging
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_send_event):
Only seek on one sink, the first one that succeeds.
Original commit message from CVS:
2005-09-21 Andy Wingo <wingo@pobox.com>
* gst/playback/gstplaybasebin.c: Attempt to fix up buffer probe
thingies.
* gst/playback/gstdecodebin.c (gst_decode_bin_dispose): Dispose
can be called multiple times, dogs.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: free plugin list correctly
* gst/playback/gstplaybin.c: emit warning if autovideosink
and autoaudiosink can't be found (instead of segfaulting)
Original commit message from CVS:
* check/generic/states.c:
* ext/ogg/gstoggdemux.c: (gst_ogg_pad_typefind):
* gst/playback/gstdecodebin.c: (gst_decode_bin_init):
Fixes for changes in registry API.
* configure.ac: Only export gst_plugins_desc. Add -no-undefined
to GST_PLUGIN_LDFLAGS.
* ext/libvisual/visual.c: Make the library shut up.
* gst-libs/gst/audio/audio.c: Don't define a plugin in a library.
* gst-libs/gst/audio/gstaudiofilter.c: same
Original commit message from CVS:
* gst/audioconvert/Makefile.am:
Audioconvert derives from GstBaseTransform and should
link to the library with our base elements to avoid
unresolved symbols. Makes things work with MinGW (#316160)
* gst/playback/test4.c: (main):
Fix MinGW build problem and use g_usleep() instead of
sleep() (#316162)
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float),
(audio_convert_prepare_context), (audio_convert_convert):
* gst/audioconvert/audioconvert.h:
Cleanups, speedups, simplifications, added back support
for 24 bits.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (GST_START_TEST), (simple_launch_lines_suite):
Add extra tests for basetransform based components.
Comment out the test_element_negotiation test until we decide
if it's testing correct behaviour.
* ext/libvisual/visual.c: (gst_visual_init), (get_buffer),
(gst_visual_chain), (gst_visual_change_state):
Slightly more correct but still bogus timestamping.
Fix state change function.
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_class_init):
* gst/audioresample/gstaudioresample.c:
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_class_init):
* gst/videoscale/gstvideoscale.c: (gst_videoscale_class_init),
(gst_videoscale_prepare_size), (gst_videoscale_set_caps),
(gst_videoscale_prepare_image):
* gst/volume/gstvolume.c: (gst_volume_class_init),
(volume_transform_ip):
Basetransform updates. Enable passthrough modes.
* sys/ximage/ximagesink.c: (gst_ximage_buffer_init),
(gst_ximagesink_renegotiate_size), (gst_ximagesink_xcontext_get),
(gst_ximagesink_setcaps), (gst_ximagesink_buffer_alloc):
Negotiation fix that allows the window to return to the original
size and renegotiate passthrough upstream. Extra debug output.
Original commit message from CVS:
* configure.ac:
In the output at the end, don't show the first plugin on the same
line as "Core plug-ins, always built:".
Indent the output as for other plugin categories
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_create):
#define that can be used to not use peer buffer_alloc functions for
test purposes.
* sys/ximage/ximagesink.c: (gst_ximage_buffer_init),
(gst_ximage_buffer_get_type), (gst_ximagesink_ximage_new),
(gst_ximagesink_show_frame):
* sys/xvimage/xvimagesink.c: (gst_xvimage_buffer_init),
(gst_xvimage_buffer_get_type), (gst_xvimagesink_setcaps),
(gst_xvimagesink_show_frame):
Error case handling fixes. gst-launch fakesrc ! x[v]imagesink now
fails gracefully instead of XError aborting or deadlocking.
Original commit message from CVS:
* gst/volume/gstvolume.c: (gst_volume_class_init),
(volume_transform):
do not update controlled params, if buffer has no timestamp
Original commit message from CVS:
* configure.ac:
* gst/sine/Makefile.am:
* gst/volume/Makefile.am:
controllerized elements also need to link against controller-libs ;)
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* docs/libs/tmpl/gstcolorbalance.sgml:
* docs/libs/tmpl/gstgconf.sgml:
* docs/libs/tmpl/gstmixer.sgml:
* docs/libs/tmpl/gstringbuffer.sgml:
* gst/sine/gstsinesrc.c: (gst_sinesrc_class_init),
(gst_sinesrc_create):
* gst/volume/gstvolume.c: (gst_volume_class_init),
(volume_transform):
controllerized two audio plugins
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (if), (float),
(audio_convert_get_func_index), (check_default),
(audio_convert_clean_fmt), (audio_convert_prepare_context),
(audio_convert_clean_context), (audio_convert_get_sizes),
(audio_convert_convert):
More elegant and working temp buffer selection algo.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (if), (float),
(audio_convert_get_func_index), (check_default),
(audio_convert_clean_fmt), (audio_convert_prepare_context),
(audio_convert_clean_context), (audio_convert_get_sizes),
(get_temp_buffer), (audio_convert_convert):
Use realloc else we lose our original data.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/audioconvert.c: (setup_audioconvert),
(cleanup_audioconvert), (get_int_caps), (verify_convert),
(GST_START_TEST), (audioconvert_suite), (main):
add a test for audioconvert
* gst/audioresample/gstaudioresample.c:
* gst/audioresample/gstaudioresample.h:
set DURATION so that TIMESTAMP(a) + DURATION(a) == TIMESTAMP(b);
note that for buffers of 1/3 sec this means DURATION(c) is
one nanosecond more than for a and b
Original commit message from CVS:
* gst/audioresample/debug.c:
* gst/audioresample/gstaudioresample.c:
add room for extra overlap samples when asked to transform size
protect against possible mem corruption and check for discrepancies
between written size and outbuffer's size so we can warn for
potential problems
* gst/audioresample/resample.c: (resample_init),
(resample_get_output_size_for_input), (resample_get_output_size),
(resample_set_n_channels), (resample_set_format):
set debug level based on RESAMPLE_DEBUG env var
make sure that get_output_size* returns a whole number of
sample_size
set sample_size each time either channel or format is set
* gst/audioresample/resample_chunk.c: (resample_scale_chunk):
* gst/audioresample/resample_functable.c:
(resample_scale_functable):
* gst/audioresample/resample_ref.c: (resample_scale_ref):
remove r->sample_size, it's done in resample.c now
add some debugging to the ref implementation
make sure we only give back bytes that are wholes of the sample
size
Original commit message from CVS:
* check/Makefile.am:
* configure.ac:
add core's plugins to the mix so that playbin works
* check/generic/states.c: (GST_START_TEST):
set a 0 timeout on pipelines, so they don't force the next
state change
* gst/playback/gstplaybasebin.c: (setup_source), (prepare_output),
(gst_play_base_bin_change_state):
remove the crappy error handling and do GST error handling
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_videoscale_init),
(gst_videoscale_prepare_size), (parse_caps),
(gst_videoscale_set_caps), (gst_videoscale_get_size),
(gst_videoscale_prepare_image), (gst_videoscale_transform_ip),
(gst_videoscale_transform):
* gst/videoscale/gstvideoscale.h:
Refactor, make use of BaseTranform really well.
Original commit message from CVS:
* check/Makefile.am:
Add CHECK_CFLAGS and LDFLAGS
* gst/playback/gstplaybasebin.c: (fill_buffer):
GST_MESSAGE_SRC became a GObject
Original commit message from CVS:
* gst/playback/gstplaybin.c: (remove_sinks):
Remove visualization from parent explicitely; works around some
apparent refcount issue that I haven't tracked down yet.
Original commit message from CVS:
* common/gtk-doc-plugins.mak:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
renamed to actual element names, so much nicer to look at
* docs/plugins/tmpl/gstmultifdsink.sgml:
remove
* docs/plugins/tmpl/multifdsink.sgml:
* docs/plugins/tmpl/tcpserversink.sgml:
add
* ext/alsa/gstalsa.c:
* ext/cdparanoia/gstcdparanoia.c: (cdparanoia_get_property):
* ext/ogg/gstoggmux.c:
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_chain):
* gst/playback/gstdecodebin.c:
* gst/tcp/gstmultifdsink.c: (gst_multifdsink_class_init):
* gst/tcp/gsttcpserversink.c:
various fixes and documentation additions
Original commit message from CVS:
2005-08-04 Andy Wingo <wingo@pobox.com>
* gst/videoscale/gstvideoscale.c (gst_videoscale_get_size):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c
(gst_ffmpegcsp_get_size): Adapt to API changes.
* gst/videoscale/gstvideoscale.c (gst_videoscale_transform_ip):
Implement an in-place do-nothing transform.
Original commit message from CVS:
* configure.ac:
When testing for X libs, use the X CFlags
* gst/adder/gstadder.c: (gst_adder_change_state):
Stop the collectpads before calling parent state change function
on PAUSED->READY, otherwise we deadlock deactivating pads.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_video_element),
(gen_audio_element):
Switch to auto*sink elements as default sinks; add volume element
so that volume control in totem works.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gen_preroll_element):
* gst/playback/gstplaybin.c: (setup_sinks),
(gst_play_bin_change_state):
Refcount fix and more comments.
Original commit message from CVS:
2005-07-20 Andy Wingo <wingo@pobox.com>
* gst/videoscale/vs_image.c (vs_image_scale_nearest_YUYV): Typo
fix (?), fixes a seggie mcfalterson (#310894).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (fill_buffer):
Use _new_custom() so we can set custom message types for buffering
messages.
Original commit message from CVS:
* gst/tcp/gstfdset.c: (gst_fdset_free):
* gst/tcp/gstmultifdsink.c: (gst_multifdsink_init),
(gst_multifdsink_add), (gst_multifdsink_remove),
(gst_multifdsink_clear), (gst_multifdsink_get_stats),
(gst_multifdsink_remove_client_link),
(gst_multifdsink_client_queue_data),
(gst_multifdsink_client_queue_caps),
(gst_multifdsink_client_queue_buffer),
(gst_multifdsink_queue_buffer), (gst_multifdsink_handle_clients),
(gst_multifdsink_stop):
* gst/tcp/gstmultifdsink.h:
0.8 backporting.
* sys/ximage/ximagesink.c: (gst_ximagesink_show_frame):
Also draw image when not from a pool.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (check_queue), (probe_triggered),
(mute_stream), (silence_stream):
Small debug additions.
Original commit message from CVS:
make GST_PLUGIN_LDFLAGS only be flags; GST_LIBS should be
added manually to each Makefile.am so we are sure it goes
*last* and doesn't add -L flags before linking in libs of our
own, like, say, internal .la libs, that then accidentally pick
up the installed copy.
