This causes a lot of nasty side effects (like decoders assuming they are
actually linked downstream).
The reason why this was done was to check whether a decoder could handle the
actual caps, but this is the wrong way to do it.
The proper way to query whether a decoder can handle certain caps is via
`GST_QUERY_ACCEPT_CAPS` which is already done just before.
Partially reverts !4677 and partially fixes#3160
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5821>
This allows metas to be serialized to be transmitted or stored. This is
intended to be used for example by gdppay or unixfdsink.
Implemented on GstCustomMeta, GstVideoMeta, GstReferenceTimestampMeta,
and GstAudioMeta.
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
Otherwise if there is a huge gap it will only be considered a
discontinuity after another discont-time amount of buffers has passed.
Like this it will be immediately a discontinuity if the gap between the
expected and received time becomes bigger than the discont-time.
The last part of the test was actually testing for this behaviour and
expected the previous behaviour. Most other tests also had to be
adjusted because discont will now happen at slightly different times
than before.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5759>
Windows does not support fork() so all tests will run in a single
process, and global variables will be reused across multiple tests.
Thus, each test should reset global variables.
Also, setup pad chain/event functions before playing state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5752>
Whenever that caps changes does not imply that a new segment will start.
Don't reset the last_ts if only the caps have changed. This fixes issues
if you have a stream without only first frame with TS=0, and have resolution
change happening. This was a regression introduced by !3059, which issue was
described in #1352. The reported issue is still fix after this change.
Fixes#1034
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5687>
The fake video decoder ignores input bitstream except
to enforce caps restrictions. It reads video width,
height and framerate from caps. Then it just pushes
video frames without doing any decoding.
The fake video decoder just draws a snake moving from
left to right in the middle of the frame. This is a
light weight drawing while it still provides an idea
about how smooth is the rendering.
The fake video decoder inherits from GstVideoDecoder.
It is useful to measure how smooth will be the whole
rendering pipeline if you had the most efficient video
decoder. Also useful to bisect issues for example when
suspecting issues in a specific video decoder.
Handles mpeg2, mpeg4, h263, h264, theora, vp8, wmv3, msmpeg,
flash-video, vp6, vp9, wmv1, wmv2, divx but more can be
added if needed.
For now it can only output RGBA, RGBx, BGRA, BGRx.
Its rank is 0 (none) but I added a property to change it so
that it can be selected by decodebin.
gst-launch-1.0 fakevideodec rank=512 \
playbin uri=http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4http://bugzilla.gnome.org/show_bug.cgi?id=723778Closes#679
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5636>
From a multimedia perspective GLES >= 2 has the big advantage of
supporting external textures (`OES_EGL_image_external` /
`OES_EGL_image_external_essl3`), allowing various YUV formats to be
imported directly by drivers.
It appears unlikely by now that the extension will ever be ported to
GL with Vulkan becoming more popular, leaving GL without an "official"
way to import YUV formats.
Further more, for Gst internal purposes it's likely that GLES2 works
equally well if not better on most drivers these days, especially on
embedded devices.
Thus switch the default for EGL context creation to GLES2. This won't
affect apps that create their own context, but `gst-launch-1.0` etc.,
which are often used for testing so people don't have to pass
`GST_GL_API=gles2`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5509>
By sealing for future writes, we broke Wayland SHM support. It seems like the
wayland library maps the SHM in read/write mode. This is visible through no
display and an error message like this:
wl_shm@7: error 2: failed mmap fd 43: Operation not permitted
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5684>
If text width ever reached 1px, for example after resizing the output window, the overlay would stop rendering
and never return again. The 1px condition itself does not seem to make much sense here anyway.
This was a chain of events: width reached 1, so the composition was set to NULL. Then, after resizing the output window,
push_frame() was called but would not attempt to renegotiate because composition is NULL. This caused the width/height
to never be updated again, as that only happens during negotiation, so the overlay was gone for good.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5614>
In rare cases - notably on macOS, because of multiple GL contexts - the lack of a sync point was causing overlays
to disappear for a frame after being redrawn, or sometimes not appear at all. This change makes sure that the display
in one GL context will be correctly synchronised with the other GL context where the overlay texture was uploaded.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5610>
There is no guarantee that g_get_user_runtime_dir() is in a tmpfs. Using
an explicit shared memory API seems safer for all POSIX platforms.
Note that Android does not have shm_open() and only added memfd_create()
since API level 30 (Android 11).
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5328>
Followup to 75872c802b , clang version
While we ignore `discarded-qualifiers` already for gcc, clang seems
to assign this error to `incompatible-pointer-types-discards-qualifiers`
so we need to ignore that as well.
```
In file included from \
../subprojects/gst-plugins-base/ext/cdparanoia/gstcdparanoiasrc.h:37: \
/usr/include/cdda/cdda_interface.h:164:3: error: initializing 'char *' with an expression \
of type 'const char [8]' discards qualifiers [-Werror, \
-Wincompatible-pointer-types-discards-qualifiers]
"Success",
^~~~~~~~~
```
See 75872c802b for more
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5474>
In _gl_memory_upload_propose_allocation(), when output target is "external-oes",
then we should not provide GL allocator and pool in the allocation query.
This is because the "external-oes" kind memory can never be mapped directly
and the upstream element may misuse it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5468>
The propose and decide allocation vfuncs are called directly from
basetransform and need to use the locked accessor function for
retrieving a reliable reference to the GstGLContext (if available)
Fixes spurious crashes on shutdown during pad reconfiguration
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5437>
The number of planes is a meta we carry around in the GstVideoMeta with
DMA_DRM format. In cannot be decuded correctly from knowledge of the
base format. Notably, some compression modifier may introduce an extra
plane to store the compression parameters.
So use n_planes from GstVideoMeta and pass this explicitly when
importing to EGLImage.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5461>
The DMAbuf accept function was ensuring the in_dma_info values was valid if
the in_caps have change. But the check was bogus since the in_caps was being
modified without a pointer change. As a side effect, on the second accept
call, the drm_fourcc was reset to 0, which cause the uploader to fallback.
Fix this by ensuring we always have a valid dma_frm info directly in the
set_caps() function. Also remove the bogus caps changed check and remove any
modification to the info structure and always do that inner checks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5461>
DRM Modifiers are not generically transferrable from a format like NV12 to
their indirect shading format (R8 / RG88). So the helper to this do needs
to be removed from our API.
To make things worse, we support indirect formats that aren't DRM format in
the first place. Notably NV12_16L32 (aka MM21) is not (yet) a DRM format. Yet,
each plane can be indirectly imported using R8/RG88 and a detiling shader.
This patch also removes this constraint restoring zero-copy playback on
Mediatek SoC.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5461>
Update connection-speed at runtime in playbin, uridecodebin and decodebin
also do the same thing in urisourcebin.
With contributions from Philippe Normand <philn@igalia.com> (build fixes and
rebase on mono-repo).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4713>
This was causing a memory leak in cases like `gltestsrc ! gltransformation scale-x=0.5 ! glimagesink`.
Parent meta was being added in assumption that those buffers are different, which was not the case here,
creating a reference loop and never freeing the buffer.
Co-authored-by: Matthew Waters <matthew@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5445>
Back in the mists of time[1], we switched `giostream*` elements to not close the
stream on stop() so that applications that needed a handle to the stream after
the element stopped had it.
Unfortunately, we also have cases[2] where waiting for the element to be
finalized is too late for the stream to be closed.
In order to not change the behaviour of the element, we add a property to allow
users to select the desired behaviour.
[1]: https://bugzilla.gnome.org/show_bug.cgi?id=587896
[2]: gst-plugins-rs#423
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5372>
By using the gst_caps_set_simple() to set the format on all structures, the
compositor may create invalid combinations as the caps may contain passthrough
caps. Avoid this issue by intersecting the resul with its original.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5386>
Adds list of formats that should be used by element in needs to passthrough
video. It contains the full list of video format plus DMA_DRM format
and will be extended in the future as needed. This patches includes 3 new
symbols:
- GST_VIDEO_FORMATS_ANY_STR
- GST_VIDEO_FORMATS_ANY
- gst_video_formats_any()
The last one can be used by bindings or for code that prefers having
GstVideoFormat values instead of strings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5386>
Right now we split the RTP header from the current buffer into a new
buffer and aggregate those buffers for later processing if the
depayloader creates an output buffer.
This is cumbersome as it happens even if none of the incoming RTP
buffers carries RTP header extensions at all just because header
aggregation has been enabled in the depayloader class.
This commit will start aggregation only in case that there really are
RTP header extensions available on an incoming RTP buffer. The check
is trivial and cheap. Once activated we keep aggregation active for
all buffers. The active state is reset on state change READY_TO_PAUSE.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5278>
The GST_VIDEO_FORMAT_Y410, GST_VIDEO_FORMAT_Y412_LE and GST_VIDEO_FORMAT_Y412_BE
formats in fact are packed formats, which have just 1 plane. But we have special
setting for them rather than using get_single_planar_format_gl_swizzle_order().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5314>
As we don't have any mapping from YUV formats + modifiers to an equivalent
emulated format (e.g. NV12 + modifier -> R8+modifier/RG88+modifier), do no
allow these formats to be used with the indirect DMABuf uploader.
Fixes#2942
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5270>
The same is done in the set_property function. This was noticed when attempting
to dump a pipeline containing glsinkbin sink=gtk4paintablesink to dot format.
Critical warnings were raised due to the missing force-aspect-ratio property on
that sink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5311>
Fixes a potential GPU stall if an immediately freed texture/buffer is
attempted to be reused immediately by the CPU, e.g. when uploading.
Problematic scenario is this:
1. element does GPU processing reading from texture
2. frees the buffer back to the pool
3. pool acquire returns the just released buffer
4. GPU processing then has to wait for the previous GPU operation to
complete causing a stall
If there was a reliable way to know whether a buffer had been finished
with across all GPU drivers, we would use it. However as that does not
exist, this workaround is to keep the released buffer unusable until the
next released buffer.
This is the same approach as is used in the qml (Qt5) elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5144>
When using `gst_sdp_media_set_media_from_caps` on `application/x-rtp` caps
without `clock-rate` it wrongly reports missing payload type even if `payload`
is present in the caps.
This seems to be a copy&paste error from the error message for missing payload
type.
When using payload=10, both `clock-rate` and some other media properties are
defined by the RTP standard so I was wondering whether I could omit `clock-rate`
and was confused about the error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5250>
Add gst_audio_ring_buffer_set_errored() that will mark the
ringbuffer as errored only if it is currently started or paused,
so gst_audio_ringbuffer_stop() can be sure that the error
state means that the ringbuffer was started and needs stop called.
Fixes a crash with osxaudiosrc if the source element posts
an error, because the ringbuffer would not get stopped and CoreAudio
would continue trying to do callbacks.
Also, anywhere that modifies the ringbuffer state, make sure to
use atomic operations, to guarantee their visibility
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5205>
If a depayloader aggregates multiple RTP buffers into one buffer only
the last RTP buffer was checked for header extensions. Now the
depayloader remembers all RTP packets pushed before a output buffer is
pushed and checks all RTP buffers for header extensions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4979>
Don't call wait_event() at all for gap events, as basesink will
end up waiting for the time that the gap event would be rendered
out at the audio device. There's no need to render it at all,
just treat it as a handy point to resync the audio if needed,
let the ringbuffer render silence, and place the next buffer
into the ringbuffer where it belongs.
The only thing we really need to do is make sure the ringbuffer
and clock are running, and wait for preroll.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2749
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5178>
These 10bit formats are identical to NV12_16L32S, but 64bytes of data is being
prefixed with 16bytes data with four pixels of lower 2bits per byte. For
MT2110T, the lower two bits set so each bytes contains a column of 4 pixels,
also describe as tiled lower 2 bits. MT2110T has been chosen as a name to match
the vendor chosen name. This format is unlikely to exist for other vendors.
For MT2110R, the 2 low bits are in raster order.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3444>
The current limit is `x10`, which allows just `+20 dB` of gain.
While it may seem sufficient, this came up as a problem
in a real-world, non-specially-engineered situation,
in strawberry's EBU R 128 loudness normalization.
(https://github.com/strawberrymusicplayer/strawberry/pull/1216)
There is an audio track (that was not intentionally engineered that way),
that has integrated loudness of `-38 LUFS`,
and if we want to normalize it's loudness to e.g. `-16 LUFS`,
which is a very reasonable thing to do,
we need to apply gain of `+22 dB`,
which is larger than `+20 dB`, and we fail...
I think it should allow at least `+96 dB` of gain,
and therefore should be at `10^(96/20) ~= 63096`.
But, i don't see why we need to put any specific restriction
on that parameter in the first place, other than the fact
that the fixed-point multiplication scheme does not support volume
larger than 15x-ish.
So let's just implement a floating-point fall-back path
that does not involve fixed-point multiplication
and lift the restriction altogether?
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5063>
When this flag is enabled, the transform_caps() simply set passthrough
to generate the raw caps. This is not correct, because the sink and
src have different format/drm-format fields.
We already add system memory conversion for DMABuf manner, so no more
need for this flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _nvmm_upload_transform_caps() only simply apply
"memory:NVMM" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
And in _nvmm_upload_accept(), we should only accept the "memory:NVMM"
feature in input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _directviv_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
And in _directviv_upload_accept(), we should only accept the system
memory as input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _gl_memory_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
And in _gl_memory_upload_propose_allocation(), we should only allocate
the allocator and buffer pool for the caps with "memory:GLMemory"
feature.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _upload_meta_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
The current _raw_data_upload_transform_caps() only simply apply
"memory:GLMemory" to all input caps to transform the output caps.
This is not precise and may cause problem. For example, if the
input caps include:
video/x-raw(memory:DMABuf), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
it will be changed as
video/x-raw(memory:GLMemory), width=(int)1920, height=(int)1080, \
interlace-mode=(string)progressive, multiview-mode=(string)mono, \
framerate=(fraction)30/1, drm-format=(string)NV12:0x0100000000000002
For GLMemory kind caps, no drm-format should appear.
So we should let it only transforms which it can recognize.
We also should recognize the system memory caps in _accept() early, if
the input is not system memory, we just return early.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
Most of the time, the RGB kind formats are OpenGL native supported
format which has only one plane. They can be imported at one shot
using no matter DIRECT or INDIRECT mode.
While YUV kind formats which have multi planes have two ways to import.
They can be DIRECT imported, which requires GL_OES_EGL_image_external
extension. The output format should be RGBA and TARGET should be set
as OES after imported. The other way, they can be INDIRECT imported,
which makes each plane as a texture. In this mode, the imported textures
have different fourcc from the original format. For example, the NV12
format can be imported as a R8 texture for the first plane and RG88
texture for the second plane. The output TARGET should be sets as 2D
in this mode.
When converting sink caps to src caps, we first filter the feature of
"video/x-raw(memory:DMABuf)" and system memory. Then Based on the
external_only flag (INDIRECT mode does not care while DIRECT mode cares),
we transform the drm-format into the gst video format.
When converting src caps into sink caps, we first filter the correct
TARGET(INDIRECT mode contains 2D only while DIRECT mode contains 2D,
OES or both of them) gstructure. Then Based on the include_external flag
(INDIRECT mode always true while DIRECT mode depends on TARGET), we
transform the gst video format into drm-format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3524>
When switching from a raw stream to an encoded stream we need to make sure the
slot is unlinked, there is code in place for this but it wasn't triggered
because the slot being reconfigured wasn't advertised as linked beforehand.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5126>
Shader compilation was failing on macOS:
gstglslstage.c:519:_compile_shader:<glslstage1> fragment shader compilation failed:
ERROR: 0:10: 'input_swizzle' : syntax error: Array size must appear after variable name
Co-authored-by: Matthew Waters <matthew@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5123>
Don't assume that compositor will output only single buffer
for single input buffer. If buffer's running time is not completly
aligned to output buffer running time or duration, compositor
can generate multiple buffers. If that happens, two threads,
one is aggregator output thread and main thread were trying
to modify buffer in this test. Clear the buffer after
shutting down pipeline to avoid the race.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2836
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5081>
Do not attempt to send a streams-selected message when reassigning
an output slot in case upstream signalled that it is handling stream selection.
In this case decodebin3 doesn't keep track of stream
collections (`dbin->collection` is NULL).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5059>
The current way of dma caps uses the drm-format to replace the orginal
format field. The absence of format field means it can accept all formats.
It causes problems when clipping with other old DMA or video/x-raw(ANY)
caps, the result will contain both format field and drm-format field,
which is not valid DMA caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4981>
This GST_VIDEO_FORMAT_DMA_DRM is introduced for DMABuf kind feature
usage. It represent the DMA DRM kind memory. And like the ENCODED
format, it should not be interpreted and mapped as normal video format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4981>
Setting the input field on the empty slot prevents future linking of it and will
result in flow errors later on.
This was observed in WebKit's MediaStream source element, when it changes the
caps on one of its associated streams, from an encoded format to a raw video
format. The associated stream-id on the sticky stream-start event doesn´t
change, but the element creates a new GstStream with a different ID and sets it
on the stream-start event. Stream parsing is disabled in urisourcebin, so
decodebin3 handles the parsing. Without this patch we would end-up with unlinked
pads in decodebin3 after switching to the raw video format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5048>
The drop-frame rules are specified in “SMPTE ST 12-3:2016” and are
consistent with the traditional ones:
“
To minimize fractional time deviation from real time, the first two
super-frame numbers (00 and 01) shall be omitted from the count at the
start of each minute except minutes 00, 10, 20, 30, 40, and 50. Thus the
first eight frame numbers (0 through 7) are omitted from the count at
the start of each minute except minutes 00, 10, 20, 30, 40, and 50.
”
Where “super-frame” is a group of 4 frames for 120 FPS.
Fixes#2797
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5028>
The current implementation copies metas without checking if the buffer
is writable.
The operation that needs to be done, replacing the input buffer and
copying the metas, is only part of that process. We create a new function
that does both.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4912>
This reverts commit 893e4ed0dd.
This caused regressions in existing elements which override/set things
like QoS and such in their own init functions. If the base class does
this in ::constructed() now it will override the subclass settings
again with its own, which can have unintended side-effects.
Case in point is gdkpixbufsink which disabled QoS there, and this
patch would reliably make the unit test fail in valgrind because
now frames are dropped because of QoS (when QoS should really be
disabled).
Fixes#2794
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5006>
When gst_element_set_state is called in _setup_locked and errors, the
callback is already processed before we reach handle_current_async, and
the timer is started even though it's finished processing, which results
in a NULL pointer crash later in async_timeout_cb.
To fix this, we check that it's still processing before calling
handle_current_async.
Fixes#1683
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4936>
Fixes test: validate.uridecodebin.expose_raw_pad_caps
testsrcbin (currently part of debugutilsbad) is an useful element for
validate tests.
validate.uridecodebin.expose_raw_pad_caps makes use of it.
Unfortunately, because validate tests with GStreamer only run with
whitelisted plugins and `debugutilsbad` wasn't in the whitelist, the
test was failing and being auto-skipped.
This patch adds debugutilsbad to the whitelists used by validate tests
in subprojects with a validate/meson.build.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4931>
This will cause an integer overflow a little bit further down because we
allocate a bit more memory to allow for a NUL-terminator.
The caller should've avoided passing that much data in already as it's
not going to be a valid image and there's likely not even that much data
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4894>
This is a small optimization and avoids restarting the next parsing
iteration on already accepted data.
On its own it would also fix ZDI-CAN-20968 (see previous commit) but the
previous commit independently is also a valid fix for it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4895>
Add support for generation of 10/12/14/16 bit bayer test pattern.
The implementation is rather simplistic, just take the ARGB
input, generate 16-bit data out of it instead of 8-bit, shift
them as required by the output bitness, and apply endian swap.
Example usage:
```
$ gst-launch-1.0 videotestsrc ! \
video/x-bayer,width=512,height=512,format=bggr12le ! \
bayer2rgb ! \
video/x-raw,format=RGBA64_LE ! \
videoconvert ! \
autovideosink
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4686>
glfilter will unref input buffer after _transform() call immidiately,
but gpu may still reading input buffer for rendering because gl
api is executed async. Need hold reference for input buffer by
adding parent meta to output buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4801>
Appsink will unref prev sample in dispose function. Which is later
when V4L2 video decoder link with appsink as V4L2 video decoder
will close V4L2 device fd during GST_STATE_CHANGE_READY_TO_NULL.
If the video buffer return to V4L2 video decoder after the decoder
closed V4L2 device fd, V4L2 can't release the video frame buffer
which allocated with MMAP mode as application can't call
VIDIOC_REQBUFS 0 to release the video frame buffer by V4L2 driver.
The memory of the video frame will leak.
Unref the gstbuffer in stop() function, so V4L2 video decoder
can received all video frame buffers and release it before close
V4L2 device fd.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4818>
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
filter the error message and don't forward it as there might be a
following candidate decoder that can be used.
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
store the latency message and handle it after decoder is accepted.
This is to avoid the selection lock failure if decodebin3 needs to
handle latency message for candidate decoders when sending sticky event.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Send sticky events to the new created decoder after it switches
to PAUSED state. It it fails, just skip this decoder and try the
next one until finding one that works. Otherwise remove this
failing stream after trying all decoders and no one can work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3856>
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.
Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4749>
Allow a project to use gstreamer-full as a static library
and link to create a binary without dependencies.
Introduce the option 'gst-full-target-type' to
select the build type, dynamic(default) or static.
In gstreamer-full/static build configuration gstreamer (gst.c)
needs the symbol gst_init_static_plugins which is defined
in gstreamer-full.
All the tests and examples are linking with gstreamer but the
symbol gst_init_static_plugins is only defined in the gstreamer-full
library. gstreamer-full can not be built first as it needs to know what plugins
will be built.
One option would be to build all the examples and tests after
gstreamer-full as the tools.
Disable tools build in subprojects too as it will be built at the end of
build process.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
This patch adds gst_egl_image_from_dmabuf_direct_target_with_dma_drm() and
add gst_egl_image_from_dmabuf_with_dma_drm() functions
New function gst_egl_image_from_dmabuf_direct_target_with_dma_drm(), where
gst_egl_image_from_dmabuf_direct_target() is a specialization of the first.
And gst_egl_image_from_dmabuf() is a specialization of new function
gst_egl_image_from_dmabuf_with_dma_drm()
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
It internally uses gst_gl_context_egl_get_dma_formats() instead of fetching
modifiers by itself.
Thus gst_egl_image_check_dmabuf_direct() is a decorator of this new function.
Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
By calling the internal function gst_gl_context_egl_fetch_dma_formats() the an
array of structures holding a DMA fourcc format and its modifiers (another array of
structure holing modifier and if it's external only) will be stored.
Users would call gst_gl_context_egl_get_format_modifiers() to get the array of
modifiers of a specific DMA fourcc format.
Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
While decodebin3 could handle changes in inputs (ex: changing codecs), there was
still one limitation which was when changing between sources which had
non-intersecting stream types (ex: switching from a video-only source to a
audio-only source). While the decoder *could* change to the proper codec ... it
would carry on using a `DecodebinOutputStream` associated to that stream
type (and therefore with pads with the wrong name).
In order to handle this:
* We notify the `MultiQueueSlot` of the change in `GstStreamType` if it already
had an associated inputstream (ex: the one associated with the static sink
pad)
* We detect such changes on the output of multiqueue as soon as
possible (i.e. when we get the GST_EVENT_STREAM_START for the new stream type)
by discarding the associated output.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1669
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4703>
When the alignment contains nothing, all its fields are 0 and always
can be satisfied. So there is no need to validate it in this case.
And there are a lot of places just setting this alignment to default
all zero value, this validation generates lots of warnings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4674>
Add d3d11 conversion path to make gst_video_convert_sample() work
for GstD3D11Memory.
Note that just adding "d3d11download" to the exisitng code is
suboptimal from GstD3D11 point of view because:
* d3d11convert element can support crop/colorspace-conversion/scale
all at once while existing software pipeline needs intermediate steps
for the conversion
* "Process everything on GPU then download it to CPU memory" would be likely
faster than "download GPU memory to CPU then processing it on CPU"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2715>
Subclasses may want to override the pad template with different formats
or with a different pad subclass.
The original beahviour is still available by calling
gst_gl_mixer_class_add_rgba_pad_templates() in _class_init() of the
subclass.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
When reconfigure_output_stream entry missing decoder path,
requested_selection should been update with what is really
active/selected immdiately with SELECTION_LOCK hold. So
use an optional message return from reconfigure_output_stream
and post it after release SELECTION_LOCK. This can make sure
other thread call to check_slot_reconfiguration will got
a correct requested_selection.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4599>
If gst_buffer_pool_set_config() fails then the pool will use its old
config. This may include different width or height when
pic_width/pic_height != frame_width/frame_height.
As a result, the assertions in theora_handle_image() will fail.
So check the result of gst_buffer_pool_set_config() and only use the pool
if it succeeds. Otherwise let the parrent decide_allocation() create a new
pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
If the buffer has no video meta then the meta is created from the local
data. In this case, the other asserts don't actually check anything. So add
another one to ensure that the buffer is actually large enough.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
Upon creating a window, glimagesink and osxvideosink now set the policy to
NSApplicationActivationPolicyRegular, which lets us show an icon in the Dock
for convenience and appear in the top menu bar like other apps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4573>
This is no longer needed since the introduction of `gst_macos_main()` in 1.22.
Before that existed, we had a patch for GLib in Cerbero, which did work but made it
impossible to update GLib at all. The code being removed was a fail-safe in case of
running without said patch being applied. It's no longer needed, since for macOS
we just wrap our GStreamer with an NSApplication using `gst_macos_main()`.
Warnings will be displayed if no NSApp/NSRunLoop is found wherever needed,
pointing the user towards using the new API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4366>
Proxy the force-live and min-upstream-latency propertyies to the internal
glvideomixerelement at construction time. force-live has to be set
during construction of the glvideomixerelement, so that has to be
deferred until the _constructed() call. Make sure that all other
existing proxied properties will still get set once the element
is created.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4494>
decodebin3 will do its best to figure out whether a parsebin is required to
process the incoming stream.
The problem is that for push-based stream it could happen that the stream would
not provide any caps, resulting in nothing being linked internally.
Furthermore, there is the possibility that a stream *with* caps would not be
using a TIME segment, which is required for multiqueue to properly work.
In order to fix those two issues, we force the usage of parsebin on push-based
streams:
* When the pad is linked, if upstream can't provide any caps
* When we get a non-TIME segment
Fixes#2521
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4492>
The proxy and queue are created in the gst_gl_window_wayland_egl_open()
function and will be recreated on open. This leaks both objects, the
wayland client documentation mentions that they should be destroyed
using the appropriate destroy functions.
Found during valgrind memory leak testing, these blocks were marked as
definitely lost.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4354>
The first serialized events that can be send on a src pad are a CAPS and then a
SEGMENT event.
When handling events from user in appsrc, we used to send a segment
automatically if the SEGMENT has not been sent yet.
This breaks if the CAPS event was not send either as we were now sending
a SEGMENT before the CAPS.
Fix this by delaying such events until the CAPS has been configured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
Existing codes rely on modified argc value by g_option_context_parse()
but g_option_context_parse_strv() is used in case of Windows.
Count arguments after the option parsing manually.
Fixing command "gst-inspect-1.0.exe -b"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4313>
Moving from PLAYING to NULL will set the stop_streaming_threads to TRUE,
but when moving back upwards its not reset to FALSE (as only done in
uncalled init and resume callbacks).
Fix by reseting value in the prepare callback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4309>
Adding propose_allocation is to meet the requirement of Application to
request buffers. Application sometimes need to create buffer pool
and request buffers to maintain buffer management itself, and Gstreamer plugin
import Application's buffers to use. So, add propose_allocation in
appsink like waylandsink and kmssink etc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4185>
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):
ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’
which we get with newer GLib versions. These were all harmless.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4273>
This is a follow-up of the previous commit that enabled support for redirection.
The problem is that the urisourcebin that emitted the error redirection never
produced any pads, and therefore was never linked to decodebin3. This resulted
in the code waiting for that (output) item to finally switch over ... which will
never happen.
The fix is done by removing it early if it was never connected to decodebin3.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4252>
The goal of parsebin is to figure out which elements to link together in order
to provide elementary streams given any random input.
The problem is that deciding whether a given stream should still have more
elements plugged in or not was dependent on ... the presence of compatible
decoders (sic).
Instead of that, if we can't plug anymore elements on a given stream *and* it is
detected as being an elementary stream, expose it.
Fixes#2118
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4231>
If sticky events are present on parsebin source pads, we propagate them to the
multiqueue source pads. Those will be propagated on the new urisourcebin source
pads like in the other code paths.
This ensures that STREAM_START event are present on new source pads. If CAPS
event are also present (not guaranteed), they will also be available.
Fixes#2384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4203>
In gst_video_info_dma_drm_to_caps() the caps are newly created, so there's no
need for make it writable. In gst_video_info_dma_drm_from_caps() a copy of the
caps is done, which implies a gst_caps_make_writable().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4195>
This allow allocating memory from any DRM driver that supports this
method. It additionally allow exporting DMABuf. This allocator depends
on libdrm and will be stubbed if the dependency is missing. This is derived
from kmssink dumb allocator.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
Read and flush console buffer from the console thread immediately,
instead of main thread. Otherwise (if main thread is busy)
the console thread will keep adding idle source and then main thread
will be unresponsive.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4067>
These parameters are not actually `out` parameters but must
be allocated and zero-initialized by the calling function.
Marking them as `out caller-allocates` will cause memory
corruptions when calling these APIs from e.g., Python code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4051>
This crept in several years ago sadly :(
The usage of accurate seeking should be reserved to use-cases where it is
essential that we seek to that position. This should not be the default.
There is a new option `--acurate-seeks/-a` to be able to force that.
Furthermore, if accurate seeks aren't required, a player should be using the
GST_SEEK_FLAG_KEY_UNIT flag to seek to the closest keyframe and provide the most
reactive experience.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3926>
Generating the source element is done when uridecodebin is doing the
READY to PAUSED state change, so it is reasonable to set the new source
element to that state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3857>
Do not store cached EGL images in GstMemory QData. Instead, use a
per-DmabufUpload GHashTable to store cache entries with a weak
reference to the GstMemory.
This allows two glupload elements on separate tee branches to have
their own EGL image cache. For this pipeline:
gst-launch-1.0 v4l2src ! tee name=t \
t. ! queue ! glupload ! fakesink
t. ! queue ! glupload ! fakesink
this gets rid of the occasional critical error message:
GStreamer-CRITICAL **: 08:26:33.194: gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3880>
With the addition of the 'keep-aspect-ratio' sizing policy, content
that doesn't fit the target size is downscaled according to its own
aspect ratio to fit that target size, and centered.
Centering might not always be the desired behaviour, however;
consumers of this API might want to align the resulting picture to
the left or to the right.
To account for any of these cases, add two new properties to the
glvideomixer pad: xalign, and yalign. They operate on normalized
coordinates (0.0 for start, 1.0 for end), and default to 0.5 which
centers content.
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
The sizing policy allows selecting between the current behavior,
which deforms the texture to fill the width and height of the
pad; and a new 'keep-aspect-ratio' sizing policy, which fits the
texture within the rectangle respecting its original aspect ratio.
The reason for this is that this allows avoiding extra elements
in the pipeline, and reduces the number of buffer passing through
the pipeline.
Most of this code is a direct port of the sizing policy handling
of the compositor element, except it is adapted to operate on GL
texture coordinates through the projection matrix.
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
If we have caps then we can only set exactly those caps, if we have no
caps yet then negotiating anything is not very meaningful because the
caps are defined by the application and not downstream.
Avoids, among other things, an unnecessary allocation query and spurious
useless caps being set before the first buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3757>
Handling mouse navigation events in glvideomixer element, if no
pixel-aspect-ratio info in the caps, an assertion error is produced
inside gst_util_fraction_multiply because default denominator is zero.
Error fixed:
```
(gst-launch-1.0:102654): GStreamer-CRITICAL **: 00:47:51.598: gst_util_fraction_multiply: assertion 'b_d != 0' failed
```
Simple pipeline to reproduce the issue:
```
gst-launch-1.0 -v glvideomixer name=mix ! glimagesinkelement gltestsrc ! mix.sink_0
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3766>
We create a new context in `gst_gl_context_create_thread()` and then
activate it on the current thread. Thereafter we assume that the
current thread continues to be the active thread for that context and
call `gst_gl_context_fill_info()` which asserts that the current
thread is the active thread.
However, if at the same time a different thread calls
`send_message_async()`, it will call into
`gst_gl_window_cocoa_send_message_async()` which will schedule the
message to be invoked using GCD. That anonymous function will also
call `gst_gl_context_activate()`, which creates a race, which can lead
to:
```
gst_gl_context_fill_info: assertion 'context->priv->active_thread == g_thread_self ()' failed
```
Fix it by using `gst_gl_context_thread_add()` to invoke `fill_info()`
on the context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3732>
The goal of the "global" group-id is to fix new inputs that do not come from the
same "source" as others. In order to ensure all "current" streams have the same
group-id we distribute the first valid group-id to all streams.
This commit fixes two issues with that:
* When inputs are unlinked they weren't always properly resetted (it would only
work if parsebin is used, which is no longer the default in
uridecodebin3/playbin3).
* When computing the global group-id, take into account unset
group-id (i.e. GST_GROUP_ID_INVALID).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1698
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3712>
As the path to the gir file is passed to hotdoc.generate_doc() and
not the build target itself, meson doesn't know about the dependency.
In turn, as the CI doesn't build everything before building the
documentation target, some gir files might not exist, for instance
in the case of gst-rtsp-server, causing the output documentation to
be empty.
The error occurred silently because hotdoc accepts wildcards for
*-sources arguments, thus it won't warn about a missing gir file as
it is legitimate for glob matching to resolve to nothing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3686>
It might be possible to fulfill those but not with the first caps
structure. Instead of just fixating the first caps structure, check if
the preference can be fulfilled by any of the structures as the first
step.
Without this the following pipeline negotiates to mono after the
decoder because opusenc only has a single channel in its first caps
structure.
gst-launch-1.0 audiotestsrc ! audio/x-raw,channels=2 ! opusenc \
! queue ! opusdec ! queue ! opusenc ! fakesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3689>
This should fix pipelines such as this one to work as expected
... ! opusenc ! capsfilter caps='audio/x-opus,
channels=1; audio/x-opus, channels=2' ! ...
The expectation is that the encoder will propose the first structure
before the second one to the source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3673>
The number of expected pads was:
* Defaulting to 1
* Or being overriden by GST_MESSAGE_STREAMS_SELECTED
This fails if upstream isn't a selectable source and has multiple streams, and
would therefore cause failures with multi-stream gapless playback
Fixes#1672
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
It is quite possible to have the blocking probe called from different streaming
threads when all expected pads are present.
* Notify all waiters by using g_cond_broadcast instead of g_cond_signal
* Properly remove the probe after waiting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
