In case the format changed fast and the pending format is different
than the currently set but the currently set is equal to the pending
one we could end up having mismatch between the finally set format
and the data stream format.
https://bugzilla.gnome.org/show_bug.cgi?id=755542
The spec defines these as signed in 5.3.9.6.1.
Since we don't support this behavior, warn and default to 0
(non repeating), which is the spec's default when the value
is not present.
https://bugzilla.gnome.org/show_bug.cgi?id=752480
Even if it doesn't actually advance the subfragment in the default way
for streams that have subfragments, it can help the base class to return
EOS when there is no more fragments instead of signaling it that it should
continue downloading.
https://bugzilla.gnome.org/show_bug.cgi?id=755042
This reverts commit 626a8f0a74.
This allows us to get the plain presentation offset and the period start time
separately. We have to adjust the timestamp by the presentation offset, but
the period start time should only adjust the stream time and running time.
https://bugzilla.gnome.org/show_bug.cgi?id=752409
This reverts commit e671ad25a9.
The timestamps should restart at 0 again for each period, but we have to
adjust the segment to map those timestamps to the actual stream time and
running time of that period.
Otherwise we would have timestamps that conflict with the ones from the tfdt
inside the MP4 container, which are restarting at 0 for each period.
https://bugzilla.gnome.org/show_bug.cgi?id=752409
In dash isombff profile the fragment is split into subframents where
bitrate switching is possible. Also take that into consideration
when checking if a stream has next fragments.
This GstStreamPeriod start value is expressed in nanoseconds,
and the glib time addition function expects microseconds.
There seems to have been a confusion with GstPeriodNode's start
field, which is expressed in milliseconds.
Additionally, add a warning if the timestamp modification did
not succeed, and NULL was returned.
The cvSmooth cvNot functions and do not have the correct input parameters.
Furthermore, cvSmooth function is not necessary for edge detection,
because the Canny function makes the step of smoothing the image.
And cvNot function is useless because there aren't changes if this
function is eliminated.
https://bugzilla.gnome.org/show_bug.cgi?id=754148
The cascade classifier changes its structure on new version of OpenCV 2.4.11.
It is need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the old and new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
For PROP_PROFILE case that exist inside gst_face_blur_set_property
function loads the new XML file in the CvHaarClassifierCascade property
without first checking that it is released because maybe there is an XML
file previously loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Changes inside the gst_face_blur_load_profile function, the number of
input parameters and in lines where it is used due to it cannot be used
generically.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Change the gstfaceblur.c file to cpp and add it into Makefile.
It is necessary to migrate the faceblur plugin to C++,
in order to load new and old classifiers, to make faceblur work
with newer versions of Opencv.
https://bugzilla.gnome.org/show_bug.cgi?id=753994
Fix some very dubious code. The class methods should always
be set, and the instance-specific check should then be done
inside the method. For data_received that's there already, for
finish_fragment we need to add it.
https://bugzilla.gnome.org/show_bug.cgi?id=753937
Some live streams (eg youtube) don't remove fragments in order to allow
seeking back in time (live + vod).
When gst_m3u8_client_has_next_fragment is called, we are getting wrong fragment
because current_file points in first file of the fragments list resulting in
watching the stream from the beginning again.
This patch sets current_file to nth fragment for live streams, then on
gst_m3u8_client_has_next_fragment will keep up with the live stream.
https://bugzilla.gnome.org/show_bug.cgi?id=753344
This allow properly copying selected meta, like the composition
overlay. Note that output buffer need to be readable, but GlUpload
keeps a ref. For now, simply drop GlUpload ref after perform,
leaving that ref has no purpose. The method shall be removed
in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=754047
Use base class default method instead of only copying flags and
timestamp. This way, selected meta's like compostion overlay will
be passed downstream as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=754047
During allocation query, when this element is not passthrough, it must
relay the overlay compostion meta and it's parameters. Fortunatly, base
transform can do this for us.
https://bugzilla.gnome.org/show_bug.cgi?id=753850
Previous patch did not handle the case where an encoding (e.g. UTF-8) is
specified in the <xml ?> element. Added an extra test for with and without
encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=753813
When running on an STB, the function
gst_mpdparser_get_xml_node_as_string causes a segmentation fault. This
code works correctly on a Linux desktop.
Looking at the libxml documentation, the xmlNodeDump is deprecated.
Replacing the use of xmlNodeDump with xmlNodeDumpOutput fixes the
segfault on the STB and removes the use of the deprecated function.
Some distributions store OpenCV files in /usr/share/opencv and some others
(and default when building from source) install them in
/usr/share/OpenCV. Support both to find cascade files.
https://bugzilla.gnome.org/show_bug.cgi?id=753651
It is faster than doing a query that propagates downstream and
should be enough
Elements: faac, gsmenc, opusenc, sbcenc, voamrwbenc, adpcmenc, sirenenc
When seeking to the last second of a mpd it would reject the seek
because the comparison was < instead of <=
This fails the important use case of seeking to the end of a file
to play it back in reverse from the end
We need to keep the active buffer (the one we have retreive a
texture id from) otherwise it's racy and upstream may upload
new content before we have rendered or during later redisplay.
The urn:mpeg:dash:utc:http-head:2014 method of time synchronisation
uses an HTTP HEAD request to a specified URL and then parses the
Date: HTTP response header.
This commit adds support to dashdemux for this method of time
synchronisation by making a HEAD request and then parsing the Date:
response.
This commit adds support to gstfragment to return the HTTP headers
and to uridownloader to support HEAD requests. To avoid creating a
new API, the RANGE get function is re-used (abused?) with start=-1
and end=-1 to indicate a HEAD request.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
This commit addresses the following items from the code review:
use a portable way to define NTP_TO_UNIX_EPOCH,
fix memory leak on error, and
add documentation to UTCTiming parse functions
Using LL is not portable, so the G_GUINT64_CONSTANT needs to be instead.
If an error occurs during DNS resolution, the GError was not being
released, causing a memory leak.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
Unless the DASH client can compensate for the difference between its
clock and the clock used by the server, the client might request
fragments that either not yet on the server or fragments that have
already been expired from the server. This is an issue because these
requests can propagate all the way back to the origin
ISO/IEC 23009-1:2014/Amd 1 [PDAM1] defines a new UTCTiming element to allow
a DASH client to track the clock used by the server generating the
DASH stream. Multiple UTCTiming elements might be present, to indicate
support for multiple methods of UTC time gathering. Each element can
contain a white space separated list of URLs that can be contacted
to discover the UTC time from the server's perspective.
This commit provides parsing of UTCTiming elements, unit tests of this
parsing and a function to poll a time server. This function
supports the following methods:
urn:mpeg:dash:utc:ntp:2014
urn:mpeg:dash:utc:http-xsdate:2014
urn:mpeg:dash:utc:http-iso:2014
urn:mpeg:dash:utc:http-ntp:2014
The manifest update task is used to poll the clock time server,
to save having to create a new thread.
When choosing the starting fragment number and when waiting for a
fragment to become available, the difference between the server's idea
of UTC and the client's idea of UTC is taken into account. For example,
if the server's time is behind the client's idea of UTC, we wait for
longer before requesting a fragment
[PDAM1]: http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=66068
dashdemux: support NTP time servers in UTCTiming elements
Use the gst_ntp_clock to support the use of an NTP server.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
This reverts commit ff11a1a8a0.
It can't be assumed that all buffers in a buffer list have the same SSRC or
are RTP or RTCP only. It has to be checked for every single buffer, and one
basically has to do the processing that is done by the default chain_list
implementation.
The current code was ignoring the par/dar aspect when transforming
from window coordinates to stream coordinates resulting in incorrect
coordinates being sent upstream in the navigation events.
The payloader didn't copy anything so far, the depayloader copied every
possible meta. Let's make it consistent and just copy all metas without tags or
with only the audio tag.
https://bugzilla.gnome.org/show_bug.cgi?id=751774
Checking the vector is not empty and checking the vector size is greater
than zero are the same thing, this is a redundancy in the code. Only
checking the vector is not empty is sufficient, therefore removing the
other check.
https://bugzilla.gnome.org/show_bug.cgi?id=744763
Add a pivot vector for setting the origin of rotations and scales.
With the pivot point the rotation and scale operations can have
different origins. This adds the ability to rotate around different points.
Currently the default (0, 0) pivot point is possible,
a rotation around the center, and zooming into and out of the center.
With an pivot point this is optional.
I defined the following image coordinates for the pivot point:
(-1,1) ------------------------- (1,1)
| |
| |
| |
| (0,0) |
| |
| |
| |
(-1,-1) ------------------------- (1,-1)
Example:
Rotate the video at the bottom left corner
gst-launch-1.0 videotestsrc \
! gltransformation \
scale-x=0.5 \
scale-y=0.5 \
rotation-z=25.0 \
pivot-x=-1.0 \
pivot-y=-1.0 \
! glimagesink
The pivot-z option defines the pivot point in 3D space.
This only affects rotation, since we have no Z data to scale.
With this option a video can be rotated around a point in 3D space.
Example:
Rotate around point behind the video:
gst-launch-1.0 videotestsrc \
! gltransformation \
rotation-x=10.0 \
pivot-z=-4.0 \
! glimagesink
Since the profile gchar depends on DEFAULT_FACE_PROFILE, it should never be
NULL. Furthermore CascadeClassifier accepts any input, even
an empty one, but if the profile fails to load it returns an empty cascade.
Check for this instead, and inform the user if there was an Error.
The gst_dash_demux_stream_update_fragment_info function could call
gst_dash_demux_stream_update_headers_info function twice. The
gst_dash_demux_stream_update_headers_info function will set header_uri and
index_uri to some newly allocated strings. The values set by the first call of
gst_dash_demux_stream_update_headers_info will leak when the function is
called for a second time.
The solution is to call gst_adaptive_demux_stream_fragment_clear before the
second call of gst_dash_demux_stream_update_headers_info
https://bugzilla.gnome.org/show_bug.cgi?id=753188
Check if profile is NULL before dereferencing it with new. Also, new will
never return NULL; if allocation fails, a std::bad_alloc exception will be
thrown instead. Remove check for a NULL return.
CID #1315258
The ref_object and object parameters were the wrong way around.
For the typical use case where an application is setting a
GstControlBinding on the returned ghost pad:
1. our control binding would be removed when the new one was set
2. sync_values calls were not being forwarded from the internal
pad to the ghost pad.
If an application attempts to perform other control binding
operations (get_* family of functions) on the internal pad, they
will also be forwarded to the ghost pad where a possible
GstControlBinding will provide the necessary values.
Only copy the values from the parent if the current node doesn't
have that value, they were being copied from the parent and
then overwriten by the child node, leaking the parent's copy
With the switch of gstopencv.c to C++, all OpenCV elements are built with
g++. The template variable clashes with C++'s feature of the same name.
Rename template to templ to avoid any clash.
The cascade classifier changes its structure on new version of OpenCV.
The need to migrate to C++ to utilize the new load method of OpenCV which
allows to load the new classifiers.
https://bugzilla.gnome.org/show_bug.cgi?id=748377
This is used to proxy GstControlBinding to the pad on the
parent object. This avoid having to sync the values in the proxy pad,
this is too early if you have a queue between the pad and the actual
aggregation operation.
https://bugzilla.gnome.org/show_bug.cgi?id=734060
When the sink does not know the window size (e.g not created yet)
it will not add any param to the the composition meta. This is no
reason not to forward this meta API. Fixes issue where it could not
attach until we resize the window.
https://bugzilla.gnome.org/show_bug.cgi?id=745107
The coordinate are relative to the texture dimension and not
the window dimension now. There is no need to pass the window
dimension or to update the overlay if the dimension changes.
https://bugzilla.gnome.org/show_bug.cgi?id=745107
Adds an GST_VIDEO_OVERLAY_COMPOSITION_META_API_TYPE query to glupload
and glimagesink. Detects the query from the downstream elements, so
it is executed only when downstream supports the overlay API.
This makes pipelines with textoverlay ! glupload ! gldownload ! xvimagesink possible.
Uses allocation meta struct for passing the window size upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=745107
Previously, PLC frames always had a length of 120ms, which caused audio
quality degradation and synchronization errors. Fix this by calculating an
appropriate length for the PLC frame.
The length must be a multiple of 2.5ms. Calculate a multiple of 2.5ms that
is nearest to the current PLC length. Any leftover PLC length that didn't
make it into this frame is accumulated for the next PLC frame.
https://bugzilla.gnome.org/show_bug.cgi?id=725167
If a ContentProtection element is present in an AdaptationSet element,
send Protection events on the source pad, so that qtdemux can use this
information to correctly generate its source caps for DASH CENC
encrypted streams.
This allows qtdemux to support CENC encrypted DASH streams where the
content protection specific information is carried in the MPD file
rather than in pssh boxes in the initialisation segments.
This commit adds a new function to the adaptivedemux base class to allow
a GstEvent to be queued for a stream. The queue of events are sent the
next time a buffer is pushed for that stream.
https://bugzilla.gnome.org/show_bug.cgi?id=705991
They require to get_proc_address some functions through the
platform specific {glX,egl}GetProcAddress rather than the default
GL library symbol lookup.
Document that "widget" property must be accessed from the
main thread (where GTK is running). This is the same for
state transition on these elements. It is very natural to
do so un GTK applications.
This is a "pseudo" base class. Basically it's a shared instance
and class structure and a shared set of function between the
two widget. It cannot have it's own type like normal base class
since the one instance will implement GtkGLArea while the other
implements GtkDrawingAreay. To workaround this, the parent instance
and class is a union of both.
https://bugzilla.gnome.org/show_bug.cgi?id=752441
I notice that if you stop the pipeline during a renegotiation
the upload may be NULL while an allocation query is being run.
In that scenario, returning FALSE to the allocation query is the
best thing.
Move back the default property at the same place they are in the
other sink. This helps when using a diff viewer to synchronized
this unfortunate copy paste.
https://bugzilla.gnome.org/show_bug.cgi?id=751104
In GTK dispose can be called before the last ref is reached. This
happens when you close the container window. The dispose will be
explicitly called, and destroyed notify will be fired. This patch
fixes this race by properly tracking the widget state.
In the sink, we now set the widget pointer to NULL, so the widget
will properly get created again if you set your pipeline to NULL
state after the widget was destroy, and set it back to PLAYING.
https://bugzilla.gnome.org/show_bug.cgi?id=751104
Very much in the same spirit as the Gtk GL sink
Two things are provided
1. A QQuickItem subclass that renders out RGBA filled GstGLMemory
buffers that is instantiated from qml.
2. A sink element that will push buffers into (1)
To use
1. Declare the GstGLVideoItem in qml with an appropriate
objectName property set.
2. Get the aforementioned GstGLVideoItem from qml using something like
QQmlApplicationEngine engine;
engine.load(QUrl(QStringLiteral("qrc:/main.qml")));
QObject *rootObject = engine.rootObjects().first();
QQuickItem *videoItem = rootObject->findChild<QQuickItem *> ("videoItem");
3. Set the videoItem on the sink
https://bugzilla.gnome.org/show_bug.cgi?id=752185
Checking for a parent is not enough, it must have a toplevel one.
If widget has no toplevel parent then add it in a GtkWindow, that
make it usable from gst-launch-1.0.
https://bugzilla.gnome.org/show_bug.cgi?id=751104
Moved gst_mpd_client_get_next_segment_availability_end_time and
gst_mpd_client_add_time_difference functions to be grouped with
functions from the same category.
https://bugzilla.gnome.org/show_bug.cgi?id=752027
Corrected the initialisation of mimeType in
gst_mpdparser_get_list_and_nb_of_audio_language: the variable is used
in a loop, so it must be set to NULL at the beginning of each iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=751911
Before returning the next fragment duration value, the
gst_mpd_client_get_next_fragment_duration function tries to validate it.
But the condition was incorrect.
https://bugzilla.gnome.org/show_bug.cgi?id=751539
We're interested in the offset between the period start timestamp and the
actual media timestamp so that we can properly correct for it. The absolute
presentation offset to timestamp 0 is useless as the only thing we really
care about is the offset between the current fragment timestamp and the
media timestamp.
Otherwise we will look for segments after the period usually. The seek
timestamp is relative to the start of the first period and we have to
select a segment relative to the current period's start.
We didn't do this for fragments that are generated on demand from a template,
only for the other cases when they were all generated upfront. This caused
fragment timestamps to start from 0 again for each new period.
If not set, the timeShiftBufferDepth has a default value of -1.
The standard says that this should be interpreted as infinite.
The gst_mpd_client_check_time_position function incorrectly compares
timeShiftBufferDepth with 0 instead of -1 to determine if it was set.
https://bugzilla.gnome.org/show_bug.cgi?id=751500
The last parameter of gst_mpd_client_add_media_segment function is a
duration. But when called from gst_mpd_client_setup_representation, the
last argument was wrongly set to PeriodEnd
https://bugzilla.gnome.org/show_bug.cgi?id=751449
The period start information, calculated in gst_mpd_client_setup_media_presentation
function is stored in stream_period->start. The information read from
xml file and stored in stream_period->period->start is not changed.
If the xml file does not contain the period start information,
stream_period->period->start will be -1.
The function gst_mpd_client_get_next_segment_availability_end_time wants to
use period start time, but incorrectly uses stream_period->period->start
(value from xml file, which could be -1) instead of stream_period->start
(computed value)
https://bugzilla.gnome.org/show_bug.cgi?id=751465
According to ISO/IEC 23009-1:2014(E), chapter 5.3.2.1
"The Period extends until the PeriodStart of the next Period, or until
the end of the Media Presentation in the case of the last Period."
This means that a configured value for optional attribute period duration
should be ignored if the next period contains a start attribute or it is
the last period and the MPD contains a mediaPresentationDuration attribute.
https://bugzilla.gnome.org/show_bug.cgi?id=750797
Support video with multiview info in the caps, transform
it to mono anaglyph by default, but allow for configuring
other output modes and handoff to the app via
the draw signal.
https://bugzilla.gnome.org/show_bug.cgi?id=611157
Added some warning messages in gst_mpd_client_setup_streaming to help
debug situations when the function will return FALSE.
Renamed a wrongly spelled variable.
https://bugzilla.gnome.org/show_bug.cgi?id=751149
Corrected some comments in gstmpdparser.h file.
Moved gst_mpd_client_get_adaptation_sets function to be grouped with
other functions from AdaptationSet group
https://bugzilla.gnome.org/show_bug.cgi?id=751149
The gst_mpdparser_get_rep_idx_with_max_bandwidth function assumes
representations are ordered by bandwidth and incorrectly returns the
first one when wanting the one with minimum bandwidth.
Corrected gst_mpdparser_get_rep_idx_with_max_bandwidth function to get the
correct representation in case max_bandwidth parameter is 0.
https://bugzilla.gnome.org/show_bug.cgi?id=751153
Getting the current viewport and modifying it relatively will produce an
interesting feedback loop during widget resizing. Over a few frames we
will gradually move the viewport a bit until it converged again, adding
unnecessary additional borders at the top and left.
We now know that pool caching can cause renegotiation issues
when an element in the pipeline change from passthrough to not
passthrough. As it's not needed, don't cache existing pools.
https://bugzilla.gnome.org/show_bug.cgi?id=748344
Added a check for a_node->ns before accessing a_node->ns->href in
gst_mpdparser_get_xml_node_namespace. This could happen if the xml
is missing the default namespace.
https://bugzilla.gnome.org/show_bug.cgi?id=750866
If the presentationTimeOffset attribute of a DASH manifest contains
a value that is larger than 2^32, gstmpdparser incorrectly calculates
the stream's presentation time offset. This is due to two bugs:
1: Using gst_mpdparser_get_xml_prop_unsigned_integer rather than
gst_mpdparser_get_xml_prop_unsigned_integer_64 to parse the
attribute
2: gst_mpd_client_setup_representation multiplying the value by
GST_SECOND and then dividing by timescale
https://bugzilla.gnome.org/show_bug.cgi?id=750804
This patch allow going gst-inspect-1.0 on these elements removing
ugly crash that was previously occurring. The method consist of
making the widget creation as lazy as possible. This way we don't
endup doing gtk_init() before the application. We also ref_sink()
the widget, so we don't crash if the parent widget is discarded,
and cleanly error out with GL if the widget has no parent window,
because calling gtk_widget_realized() can only be done if the widget
has been parented to a window).
