Commit graph

1886 commits

Author SHA1 Message Date
Sreerenj Balachandran
7d77cdd9f7 FEI: libs: Add FEI functional mode configuration
FEI Entrypoint can work in either one of the 3 different modes:
VA_FEI_FUNCTION_ENC, VA_FEI_FUNCTION_PAK or VA_FEI_FUNCTION_ENC_PAK.

Add infrastructure in gstvaapicontext and gstvaapiencoder for this
functioal mode configuration.

https://bugzilla.gnome.org/show_bug.cgi?id=785712
https://bugzilla.gnome.org/show_bug.cgi?id=784667
2017-09-01 11:32:07 +02:00
Sreerenj Balachandran
6bbe79925c FEI: libs: Add FEI Entrypoint mapping
Define the new mapping GST_VAAPI_ENTRYPOINT_SLICE_ENCODE_FEI
for VAEntrypointFEI.

https://bugzilla.gnome.org/show_bug.cgi?id=785712
https://bugzilla.gnome.org/show_bug.cgi?id=784667
2017-09-01 11:27:28 +02:00
Orestis Floros
0955752898 libs: decoder: h264: decode SVC base layer only
Drops non-base NALs when the base-only property is set to TRUE.
This modifies the behavior for MVC streams with base-only too: All the
non-base units are dropped before they are decoded instead of dropping
the non-base frames.

The relevant part from the H264 spec is:
> Decoders that conform to one or more of the profiles specified in
Annex A rather than the profiles specified in Annexes G or H shall
ignore (remove from the bitstream and discard) the contents of all NAL
units with nal_unit_type equal to 14, 15, or 20.

To eliminate side effects from the offending units:
- PPS's with a broken seq_parameter_set_id (referring to dropped subset
SPS's) are ignored.
- The NAL parsing is skipped and their flags are set to
GST_VAAPI_DECODER_UNIT_FLAG_SKIP.
- Prefix units are not stored in prev_pi. Otherwise, parse_slice() would
use them even if they are flagged to be skipped. Subset SPS's and slice
extension units are not stored there either.

https://bugzilla.gnome.org/show_bug.cgi?id=732266

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2017-08-28 17:32:57 -07:00
Orestis Floros
a016aa181b libs: decoder: h264: check nalu validity in parser info finalize
https://bugzilla.gnome.org/show_bug.cgi?id=732266

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2017-08-28 17:31:22 -07:00
Víctor Manuel Jáquez Leal
3bfb29e4c2 libs: encoder: remove unused cast macro
Remove internal macro to cast structure that are already declared
in the header.
2017-08-28 19:20:42 +02:00
Víctor Manuel Jáquez Leal
9c2246740b Revert "libs: encoders: remove unused cast macros"
This reverts commit fd7d38f7d2.
2017-08-28 19:09:07 +02:00
Víctor Manuel Jáquez Leal
fd7d38f7d2 libs: encoders: remove unused cast macros
They are only used inside the code, where another macro is defined.
Thus these exported macros have no use.
2017-08-28 18:32:36 +02:00
Víctor Manuel Jáquez Leal
d9c88f4785 libs: decoder: h264: improve code-style
https://bugzilla.gnome.org/show_bug.cgi?id=786173
2017-08-25 16:51:38 +02:00
Víctor Manuel Jáquez Leal
b942f9e17f libs: encoder: h264: handle deprecated enum
In VA-API 1.0 the enum VAEncPackedHeaderH264_SEI is deprecated, and
instead VAEncPackedHeaderRawData should be used.

This patch creates a compatibility symbol,
VA_ENC_PACKED_HEADER_H264_SEI, to expose the used enum according the
VA-API version.

https://bugzilla.gnome.org/show_bug.cgi?id=784398
2017-08-25 16:44:27 +02:00
Víctor Manuel Jáquez Leal
585628d2a2 libs: guard deprecated symbols
In VA-API 1.0 the H.264 baseline profile is deprecated. This patch
guards the H.264 baseline usage. Consider this commit as a
continuation of commit e0e0a474

https://bugzilla.gnome.org/show_bug.cgi?id=784398
2017-08-25 16:07:34 +02:00
Víctor Manuel Jáquez Leal
e8148cea0d libs: macro to get a renamed value in VA-API 1.0
In VA-API 1.0 the union bits in VAEncMiscParameterBufferROI has
renamed one member from roi_value_is_qp_delat to
roi_value_is_qp_delta, which is the correct name.

In order to keep back compatibility a macro has added to access this
union member.

https://bugzilla.gnome.org/show_bug.cgi?id=784398
2017-08-25 15:57:39 +02:00
Víctor Manuel Jáquez Leal
ffffb99473 libs: encoder: h264: fix enum namespace 2017-08-18 18:16:18 +02:00
Víctor Manuel Jáquez Leal
75fd0d4ff0 libs: encoder: h264: remove spurious assignation
Coverity scan bug:

An assigned value that is never used may represent unnecessary
computation, an incorrect algorithm, or possibly the need for cleanup
or refactoring.

ip_period is assigned first to be rewritter inmediatly after. The
first assignation is spurious.
2017-08-17 11:03:35 +02:00
Víctor Manuel Jáquez Leal
a07ff9641c libs: remove unused header
Since libgstvaapi is not distributed, there is no need to check for
private header inclusion. Thus removing it.

https://bugzilla.gnome.org/show_bug.cgi?id=786119
2017-08-13 18:08:19 +02:00
Víctor Manuel Jáquez Leal
3b8b2ff36c libs: utils: move gstvaapisurface.h to private headers
Since the utils don't expose API defined in gstvaapisource.h, it is
moved to their private headers where they are used.

https://bugzilla.gnome.org/show_bug.cgi?id=786119
2017-08-13 18:08:19 +02:00
Víctor Manuel Jáquez Leal
3f9ad1ffd8 libs: utils: remove va.h include in header
And include gstvaapicompat.h in the C files, since the VA-API is not
exposed in the headers.

https://bugzilla.gnome.org/show_bug.cgi?id=786119
2017-08-13 18:08:19 +02:00
Víctor Manuel Jáquez Leal
aaca75fefb libs: encoder: remove va.h include
Since it is already managed by gstvaapicompat.h

https://bugzilla.gnome.org/show_bug.cgi?id=786119
2017-08-13 18:08:19 +02:00
Víctor Manuel Jáquez Leal
9891f1a9e2 build: consolidate the VA sub API includes
Include all VA sub APIs headers in a single point (gstvaapicompat.h),
since they are all already included in va.h after VA-API 0.38.

https://bugzilla.gnome.org/show_bug.cgi?id=786119
2017-08-13 18:08:19 +02:00
Víctor Manuel Jáquez Leal
241b95dad2 libs: decoder: h265: remove spurious code
Coverity scan:

Logically dead code: The indicated dead code may have performed some
action; that action will never occur.

By using pointer arithmetic is impossible to get NULL.
2017-08-09 19:06:59 +02:00
Víctor Manuel Jáquez Leal
e42ec3ad3c libs: context: use attribs index instead pointers
Coverity scan bug:

Out-of-bounds write. This could cause an immediate crash or incorrect
computations.

Coverity basically found that it is possible to assign more than 4
attribs in the array.

In my opinion this was produced because code pattern used pointer
arithmetic, which is not readable nor maintainable.

This patch refactors config_create() to use an array index rather than
pointer arithmetic. Also a run-time check for index size was added.
2017-08-08 18:52:37 +02:00
Víctor Manuel Jáquez Leal
775f912247 libs: windows: wayland: fail if cannot remove last frame
Converity scan bug:

If the function returns an error value, the error value may be
mistaken for a normal value.

If g_atomic_pointer_compare_and_exchange() fails because the frame is
not the last one, the function fails. Thus, logging an info message.
2017-08-08 17:29:54 +02:00
Víctor Manuel Jáquez Leal
fbffda4e2f libs: utils: glx: check return value
Coverity scan bug:

If the function returns an error value, the error value may be
mistaken for a normal value.

Function sscanf returns the number of assignations done. Validate this
return value with the number of expected variables to match.
2017-08-08 17:21:52 +02:00
Víctor Manuel Jáquez Leal
d99d5704a4 libs: vaapi: object: remove unrequired NULL check
Coverity scan bug:

Dereference after null check: Either the check against null is
unnecessary, or there may be a null pointer dereference.

Variable klass has been validated as non-NULL several time before in
gst_vaapi_object_new() function, so there is no need to check it
again.
2017-08-08 17:12:06 +02:00
Víctor Manuel Jáquez Leal
d65ce31f14 libs: encoder: h265: remove spurious assignation
Coverity scan bug:

An assigned value that is never used may represent unnecessary
computation, an incorrect algorithm, or possibly the need for cleanup
or refactoring.

ip_period is assigned first to be rewritter inmediatly after. The
first assignation is spurious.
2017-08-08 17:06:17 +02:00
Víctor Manuel Jáquez Leal
f197749343 libs: encoder: h264: fix copy & paste error
Coverity scan bug:

The copied code will not have its intended effect.

This is a bug from commit cdaf15b2, where the intention is to
initialize RefPicList1 while setting RefPicList0.
2017-08-08 16:57:12 +02:00
Víctor Manuel Jáquez Leal
bd7716a739 libs: encoder: h265: fix possible integer overflow
Coverity scan bug:

Unintentional integer overflow. The expression's value may not be what
the programmer intended, because the expression is evaluated using a
narrow (i.e. few bits) integer type.

Cast operator to guint64 before computation to avoid narrowing.

merge with 3c5a6add
2017-08-08 16:56:58 +02:00
Víctor Manuel Jáquez Leal
4e27245f28 libs: decoder: mpeg4: fail if return value is not OK
Coverity scan bug:

An assigned value that is never used may represent unnecessary
computation, an incorrect algorithm, or possibly the need for cleanup
or refactoring.

In the return value of decode_slice() or
gst_mpeg4_parse_video_packet_header() are not success, thus fail
decode_packet() function.
2017-08-08 16:15:46 +02:00
Víctor Manuel Jáquez Leal
067968ae74 libs: decoder: h265: check for null
Coverity scan bug:

Dereference after null check: Either the check against null is
unnecessary, or there may be a null pointer dereference.

While looking for hte lowest poc, according to rest of the code, the
picture in the dbp (decoded picture buffer) might be NULL, thus we
could check for a NULL picture before assigned as found.

Also, split a comma operator because it is considered as a bad
practice because it possible side effects.
2017-08-08 16:15:45 +02:00
Víctor Manuel Jáquez Leal
d879664a0a libs: decoder: h265: untaint loop control variable
Coverity scan bug:

Scalars (for example, integers) are not properly
bounds-checked (sanitized) before being used as array or pointer
indexes, loop boundaries, or function arguments are considered as
tainted.

In this case, num_nals were not checked before used as loop control.
2017-08-08 15:38:16 +02:00
Víctor Manuel Jáquez Leal
9eddf6c004 libs: decoder: h264: remove unrequired NULL check
Coverity scan bug:

Dereference after null check: Either the check against null is
unnecessary, or there may be a null pointer dereference.

In the original commit for fill_picture_gaps() (commit 5abd2b90) the
prev_picture could be NULL, that's why the code did a null check. But,
since commit 52adebe7, the previous reference frames are tracked, thus
there is no need to check null anymore.
2017-08-08 13:46:56 +02:00
orestisf
ac9ddc5e8d libs: decoder: h264: decode MVC base view only
If processed SPS has mvc profile and the configuration is set to
base-only, the frame is drop.

https://bugzilla.gnome.org/show_bug.cgi?id=732265
2017-08-03 17:07:14 +02:00
orestisf
1dd03ac2fd libs: decoder: h264: add setter for base-only mode
https://bugzilla.gnome.org/show_bug.cgi?id=732265
2017-08-03 17:07:09 +02:00
Víctor Manuel Jáquez Leal
a1fc1e9822 libs: encoder: h264: missing property enum documentation 2017-08-02 11:40:17 +02:00
Hyunjun Ko
cdaf15b24d libs: encoder: h264: add multi reference support
Using num_ref_frames provided and the result of the Query
VAConfigAttribEncMaxRefFrames, it determines the size of reference list
and perform encoding with multi reference frames as the following:

1\ The num_ref_frames is being considered as the number of
reference picture list0
2\ Encoder adds 1 reference frame more to the reference picture list1
internally if b-frame encoding.
3\ If num_ref_frames is bigger than the number of refrence frames
supported in the driver, it will be lowered.

https://bugzilla.gnome.org/show_bug.cgi?id=783803
2017-08-02 11:21:02 +02:00
Hyunjun Ko
cd6a9736bd libs: encoder: h264: add refs property
Users can provide the number of reference frame by this property.

The value of the property will be considered as the number of
reference picture list0 and will add 1 reference frame more to the
reference picture list1 internally if b-frame encoding.

If the value provided is bigger than the number of refrence frames
supported in the driver, it will be lowered.

https://bugzilla.gnome.org/show_bug.cgi?id=783803
2017-08-02 11:20:35 +02:00
Hyunjun Ko
ec76a9a7e3 libs: encoder: implements gst_vaapi_encoder_ensure_max_num_ref_frames
This function will query VAConfigAttribEncMaxRefFrames to get the
maximum number of reference frames supported in the driver.
This will be used for h264/h265 encoding.

https://bugzilla.gnome.org/show_bug.cgi?id=783803
2017-08-02 11:17:39 +02:00
Tomas Rataj
c181308904 libs: display: when appending formats change pointers to indexes
Thus, it fixes an invalid read when YV12 or I420 are not supported by
the driver.

https://bugzilla.gnome.org/show_bug.cgi?id=785085
2017-08-01 16:23:22 +02:00
Sreerenj Balachandran
aa3543929b libs: encoder: h264: Add uncompliant mode reducing coded buffer size
Added a new property "compliance-mode", which default is the normal
strict compliant mode.

The second mode, "restrict-buf-alloc", is to limit the coded buffer
allocation size to improve performance in some specific Intel
platforms (there is asignificant performance improvement in parallel
encodings). Under this new mode, we use the MinCR field in A.3.1 for
pre-calculating the coded-buffer size.

https://bugzilla.gnome.org/show_bug.cgi?id=784590
2017-08-01 14:37:44 +02:00
Sreerenj Balachandran
f775bbfe07 libs: utils_h264: Extend LevelLimit table with MinCR field
Add MinCR(Minimum Compression Ratio) field to GstVaapiH264LevelLimits
based on Annex A.3

https://bugzilla.gnome.org/show_bug.cgi?id=784590
2017-08-01 14:32:30 +02:00
Víctor Manuel Jáquez Leal
777bba473e libs: utils: libva 1.0 changed the logging
The logging mechanism in libva has changed it's functions
signatures. This patch updates that for libva versions >= 1.0

https://bugzilla.gnome.org/show_bug.cgi?id=784398
2017-07-31 18:17:06 +02:00
Víctor Manuel Jáquez Leal
e0e0a47476 libs: decoder: h264: libva 1.0 deprecated baseline
libva 1.0 deprecated H.264 baseline profile and FMO support
(commit b4f332b3).

https://bugzilla.gnome.org/show_bug.cgi?id=784398
2017-07-31 18:17:06 +02:00
Víctor Manuel Jáquez Leal
8a7354380c build: meson: remove gstvaapidisplaycache.c
This is a missing bit of commit ec3e10f6
2017-07-26 20:32:09 +02:00
Hyunjun Ko
d78e094fd4 libs: display: x11: add gst_vaapi_display_x11_new_with_va_display()
Implements new API function so that users could create GstVaapiDisplay
with their own VADisplay within a native display as backend.

https://bugzilla.gnome.org/show_bug.cgi?id=766704
2017-07-18 18:50:39 +02:00
Hyunjun Ko
356212214b libs: display: pass display info when foreign display
When creating a GstVaapiDisplay using a foreign VADisplay, and render
with that display, it also requires native display of the backend.

https://bugzilla.gnome.org/show_bug.cgi?id=766704
2017-07-18 18:43:06 +02:00
Víctor Manuel Jáquez Leal
ec3e10f666 libs: display: remove cache
Remove a bunch of code that handles the VADisplay cache, since the
context sharing should be doing this correctly.

https://bugzilla.gnome.org/show_bug.cgi?id=747946
2017-07-18 18:20:21 +02:00
Víctor Manuel Jáquez Leal
a9c13a0934 libs: encoder: vp9: array terminated in zeros
There is a crash when setting ref-pic-mode since the #GEnumValue
array is not terminated with a structured with all memvers being
zero.

https://bugzilla.gnome.org/show_bug.cgi?id=785032
2017-07-17 18:59:13 +02:00
Matt Staples
66d26da39f libs: decoder: h264: push frames as soon as possible
Push frames downstream as soon as possible instead of waiting until
they are ejected from the DPB.

This patch makes the decoder not comply with the H.264 specification,
but it is required for some video cameras.

https://bugzilla.gnome.org/show_bug.cgi?id=762509

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-07-10 19:30:46 +02:00
Víctor Manuel Jáquez Leal
28d1d048a6 libs: decoder: h264: add getter/setter for low latency mode
https://bugzilla.gnome.org/show_bug.cgi?id=783588
2017-07-07 19:32:11 +02:00
Hyunjun Ko
6ebf7b10ae libs: encoder: h264: submit sps in case of IDR picture
If the picture is IDR, also submit a SPS header.

This means when frame number reaches to keyframe-period or an force
key unit event arrives, we insert SPS/PPS again.

https://bugzilla.gnome.org/show_bug.cgi?id=776712
2017-07-04 14:25:39 +02:00
Hyunjun Ko
465d5868d9 libs: encoder: h264: set the frame as IDR if forced key unit
GST_VIDEO_CODEC_FRAME_IS_FORCE_KEYFRAME() is a flag usually used to manage
the `frame-lost` event in the case of streaming, such as RTP.

In case of this event, it is needed to start new GOP rather than just
produce an I-frame.

https://bugzilla.gnome.org/show_bug.cgi?id=776712
2017-07-04 14:25:39 +02:00
Sreerenj Balachandran
02a6e9a273 libs: encoder: h264: insert AU delimiter
Insert an AUD as the first NAL of each encoded frame.

Some applications require Access Unit Delimiter for decoding the
stream.

The AU delimeter insertion is done only when the aud parameter is
TRUE (by default is disabled). The reason of this it is because this
header is only available from Intel Gen9 and the VA intel driver
should be 1.8 or superior. Otherwise, the output will be corrupted.

https://bugzilla.gnome.org/show_bug.cgi?id=776712

Signed-off-by: Victor Jaquez <vjaquez@igalia.com>
2017-07-04 14:22:52 +02:00
Hyunjun Ko
9b73b31c7a libs: encoder: h264: initialize all elements of view_ids
Currently when num_views is changed by multiview-mode on sink caps, it produces
wrong MVC encoded stream since the array view_ids is not set properly according
to changed num_views.

So this patch initializes all of the array sequentially to handle this case.
Side effect is not going to happen by this patch since this array is being
handled by num_views.

https://bugzilla.gnome.org/show_bug.cgi?id=784321
2017-07-04 13:27:56 +02:00
Hyunjun Ko
5b38e7fbe2 Revert "encoder: h264: Use high profile by default"
This reverts commit 4aec5bdd72.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-07-03 18:48:07 +02:00
Hyunjun Ko
ca84fd211a libs: encoder: h264: set profile via capsfilter
Until now, the encoder ignored the profile in src caps and chose one
according with the given parameters. But the encoder must honor the
profile specifed in src caps.

This patch do that, and if the encoder needs to choose the profile,
it will do it by following these rules:

1\ If given parameters are not compatible with given profile, the
   encoder will bail out with an error.
2\ The encoder will choose the higher profile indicated in the
   src caps.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-07-03 18:38:16 +02:00
Hyunjun Ko
9397cd7d4d libs: decoder: h264: initialize active_sps/pps in reset
Since commits in https://bugzilla.gnome.org/show_bug.cgi?id=781142 landed,
they introduced regression in seek.

Formerly, once seek is done, decoder drops P-frames until I-frame arrives.
But since the commits landed, it doesn't drop P-frame and does try to
decode it continuously because active_sps is still alive. See ensure_sps function.
But there are prev_frames and prev_ref_frames reset already, then it
causes assertion.

So it's necessary to reset active_sps/pps also in reset method.

https://bugzilla.gnome.org/show_bug.cgi?id=783726
2017-06-15 13:40:27 +02:00
Víctor Manuel Jáquez Leal
3ed2023c2c libs: encoder: fix compilation with old versions of libva
There are some symbols that are not used when compiling with old
version of libva and those generates a compilation error.

Original-patch-by: Matt Staples <staples255@gmail.com>
2017-06-15 13:24:56 +02:00
Sreerenj Balachandran
595f8b7d4b libs: encoder: Fix the quality level clamping
Change the hard-coded range of quality-level from {1-8} to {1-7},
since it is the range Intel Open source driver supports.
Also perform the range clamping only if the user provided
quality-level is greater than the max-range suppored by the driver,
because there could be non-intel drivers giving lower value than
the hard-coded max value 7.

https://bugzilla.gnome.org/show_bug.cgi?id=783567
2017-06-13 16:51:52 +02:00
Víctor Manuel Jáquez Leal
eee8a78173 libs: encoder: log out the name of the profile
Instead of printing a number, it is more readable to log out, in
case of error, the name of the failing profile.
2017-06-13 13:51:01 +02:00
Hyunjun Ko
3dce250236 libs: encoder: h264: changes raw number of profile to macro name of its
Changes raw number of profile to macro name of its to improve readability.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-06-13 13:39:19 +02:00
Víctor Manuel Jáquez Leal
94b41c8d38 libs: encoder: set framerate if bigger than 0/1
Just set the framerate parameter if the framerate numerator and
denominator are bigger than zero.

Otherwise, in Intel Gen6 driver, a warning is raised disabling the
bitrate control.

Original-patch-by: Hyunjun Ko <zzoon@igalia.com>

https://bugzilla.gnome.org/show_bug.cgi?id=783532
2017-06-08 13:21:42 +02:00
Víctor Manuel Jáquez Leal
f8afb1eea4 libs: encoder: bitrate target percentage calculation
If the rate control is set to Constant Bit Rate (CBR) the target
percentage is 100%, otherwise is 70%
2017-06-07 16:04:38 +02:00
Víctor Manuel Jáquez Leal
4b5ecca29c libs: encoder: h264,h265,mpeg2,vp8,vp9: refactor ratecontrol param
Centralize the common configuration for the Rate Control parameter,
thus can be overloaded per each specific encoder.
2017-06-07 16:04:38 +02:00
Víctor Manuel Jáquez Leal
035efded75 libs: encoder: h264,h265,mpeg2,vp8,vp9: refactor framerate param
Since the framerate VA parameter is calculated equally among all the
encoders, it is better to handle it in the base encoder class.
2017-06-07 12:43:55 +02:00
Sreerenj Balachandran
4bf8ef724b libs: encoder: vp9: Adds CBR and VBR Encoding support
https://bugzilla.gnome.org/show_bug.cgi?id=766832

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-06-07 12:08:10 +02:00
Hyunjun Ko
5d345b08fd libs: encoder: vp8: Adds VBR Encoding support
https://bugzilla.gnome.org/show_bug.cgi?id=778732
2017-06-07 11:24:38 +02:00
Hyunjun Ko
f68d0452be libs: encoder: h265: Adds VBR Encoding support
Enables Variable BitRate mode, which does set FrameRate and RateControl
parameters.

https://bugzilla.gnome.org/show_bug.cgi?id=778732
2017-06-07 11:24:38 +02:00
Hyunjun Ko
cbd912b89b libs: encoder: Describes more detail about the bitrate property
https://bugzilla.gnome.org/show_bug.cgi?id=778732
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
81886682cd libs: encoder: h265: add rate control parameter
https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
d733714ef8 libs: encoder: h264,h265,mpeg2: add framerate parameter
https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
846c276e26 libs: encoder: vp8,h264,h265,mpeg2: set misc param once
Instead of recalculating the miscellaneous buffer parameters for
every buffer, it is only done once, when the encoder is configured.
And for every buffer, the same structures are just copied.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
acf106e1a7 libs: encoder: vp8,h264,h265,mpeg2: refactor misc parameters
This is patch pretends to decouple the assignation of the values
in the parameter structures and the VA buffer's parameters setting.

It may lead to some issues since HRD, framerate or controlrate may
not be handled by the specific encoder, but they are set in
the VA buffer's parameters.

I leave as it because this patch is just a transitional patch.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
daff4e9fbd libs: encoder: vp8: fix frame rate calculation
According to the VA documentation:

     The framerate is specified as a number of frames per second,
     as a fraction.  The denominator of the fraction is given in
     the top half (the high two bytes) of the framerate field, and
     the numerator is given in the bottom half (the low two bytes).

     For example, if framerate is set to (100 << 16 | 750), this is
     750 / 100, hence 7.5fps.

     If the denominator is zero (the high two bytes are both zero)
     then it takes the value one instead, so the framerate is just
     the integer in the low 2 bytes.

This patch fixes the the framerate calculation in vp8 encoder
according to this.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
baac8dc8a3 libs: encoder: vp8: refactor FrameRate parameter
Move frame-rate parameter from ensure_misc_params() to
ensure_contro_rate_param() since it only has meaning when the
control rate is either VBR or CBR.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
fc5106bd31 libs: encoder: h264,h265,mpeg2,vp8: refactor HDR
Move the Hypothetical Reference Decoder (HRD) parameter, from
ensure_misc_params() to ensure_control_rate_params(), since it
only shall be defined when the control rate is either VBR or CBR.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
b538a86d4e libs: encoder: h264,vp8,mpeg2: refactor control rate
Instead of filling the control rate param in ensure_misc_params(),
this patch refactor it out, as a first step to merge the same code
for all the encoders.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
5c05a8b436 libs: encoder: h264, h265, mpeg2: remove assert
Remove spurious asserts for misc parameters. If they cannot be
allocated, FALSE is already returned.
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
37b81a7b69 libs: encoder: use VA quality level structure
Instead of using a proxy to story the buffer quality level, the
encoder now uses the native VA structure, which is copied to the
dynamically allocated VAEncMiscParameterBuffer.

This approach is computationally less expensive.
2017-06-07 11:24:08 +02:00
Víctor Manuel Jáquez Leal
0e31137dec libs: standardize the FIXME comment
This is a trivial patch that makes homogeneous the FIXME tag in
comments.

For more info about these comment style:
http://wiki.c2.com/?FixmeComment
2017-06-01 16:05:50 +02:00
Hyunjun Ko
e66aaf166c libs: encoder: vp8: set quality level regardless of rate control mode
https://bugzilla.gnome.org/show_bug.cgi?id=782957
2017-05-23 11:55:03 +02:00
Víctor Manuel Jáquez Leal
ed3360bf3b libs: encoder: check for maximum number of slices
Right now, H264 and HEVC can set as a property the number of slices to
process. But each driver can set a maximum number of slices, depending
on the supported profile & entry point.

This patch verifies the current num_slices to process against the maximum
permitted by the driver and the media size.

https://bugzilla.gnome.org/show_bug.cgi?id=780955
2017-05-19 16:33:27 +02:00
Víctor Manuel Jáquez Leal
58f6e78017 libs: utils: mark functions as internals
The functions in this header are internal to the library.
2017-05-15 18:36:21 +02:00
Víctor Manuel Jáquez Leal
3c31e8292a libs: context: add missing documentation
Document the region-of-interest configuration variables.
2017-05-15 18:35:40 +02:00
Hyunjun Ko
f09f21def7 libs: window: x11: fix src rect info when using vpp
Since we started using VPP in VaapiWindowX11, we need to care about
the case that src rect and window's size are different.

So, once VPP has converted to other format, we should honor the
size of the VPP's surface as source rect. Otherwise, it is cropped
according the previous size of the source rect.

https://bugzilla.gnome.org/show_bug.cgi?id=782542
2017-05-12 16:23:38 +02:00
Hyunjun Ko
f3302a0a79 libs: encoder: h264: set ROI params during encoding
Set ROI params during encoding each frame, which are set via
gst_vaapi_encoder_add_roi ()

https://bugzilla.gnome.org/show_bug.cgi?id=768248

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-12 11:12:56 +02:00
Hyunjun Ko
7a6f690340 libs: encoder: add api gst_vaapi_encoder_add/del_roi
Implements and exposes new api gst_vaapi_encoder_add/del_roi to set ROI regions.

https://bugzilla.gnome.org/show_bug.cgi?id=768248
2017-05-12 11:12:56 +02:00
Hyunjun Ko
b41d72b7c5 libs: encoder/context: query region of interest support
Queries if the driver supports "Region of Interest" (ROI) during the config
creation.

  This attribute conveys whether the driver supports region-of-interest (ROI)
  encoding, based on user provided ROI rectangles.  The attribute value is
  partitioned into fields as defined in the VAConfigAttribValEncROI union.

  If ROI encoding is supported, the ROI information is passed to the driver
  using VAEncMiscParameterTypeROI.

https://bugzilla.gnome.org/show_bug.cgi?id=768248

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-12 11:12:56 +02:00
Víctor Manuel Jáquez Leal
3ec7996d75 libs: encoder: fix a comment 2017-05-12 11:12:56 +02:00
Víctor Manuel Jáquez Leal
4269adf791 libs: encoder: guard quality level configuration
The quality level appeared in VA-API 0.36. So let's guard its
usage.
2017-05-11 12:23:28 +02:00
Sreerenj Balachandran
4f343f82e3 encoders: add quality level tuning
This patch adds the handling of VAEncMiscParameterTypeQualityLevel,
in gstreamer-vaapi encoders:

  The encoding quality could be set through this structure, if the
  implementation supports multiple quality levels. The quality level set
  through this structure is persistent over the entire coded sequence, or
  until a new structure is being sent. The quality level range can be queried
  through the VAConfigAttribEncQualityRange attribute. A lower value means
  higher quality, and a value of 1 represents the highest quality. The quality
  level setting is used as a trade-off between quality and speed/power
  consumption, with higher quality corresponds to lower speed and higher power
  consumption.

The quality level is set by the element's parameter "quality-level" with a
hard-coded range of 1 to 8.

Later, when the encoder is configured in run time, just before start
processing, the quality level is scaled to the codec range. If
VAConfigAttribEncQualityRange is not available in the used VA backend, then
the quality level is set to zero, which means "disabled".

All the available codecs now process this parameter if it is available.

https://bugzilla.gnome.org/show_bug.cgi?id=778733

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-11 11:51:56 +02:00
Hyunjun Ko
2d7c7630c9 libs: windows: wayland: fix leak if failure of sync
Sometimes gst_vaapi_window_wayland_sync returns FALSE when poll returns EBUSY
during destruction.
In this case, if GstVaapiWindow is using vpp, leak of vpp surface happens.
This surface is not attached to anything at this moment, so we should release
it manually.

https://bugzilla.gnome.org/show_bug.cgi?id=781695
2017-04-25 11:24:38 +02:00
Hyunjun Ko
824974e657 libs: window: wayland: mark frames as done
When the frame listener callbacks 'done', the number of pending
frames are decreased. Nonetheless, there might be occasions where
the buffer listener callbacks 'release', without calling previously
frame's 'done'. This leads to problem with
gst_vaapi_window_wayland_sync() operation.

This patch marks as done those frames which were callbacked, but if
the buffer callbacks 'release' and associated frame is not marked
as 'done' it is so, thus the number of pending frames keeps correct.

https://bugzilla.gnome.org/show_bug.cgi?id=780442

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-04-24 13:16:03 +02:00
Víctor Manuel Jáquez Leal
3b314ba93e libs: window: wayland: don't sync at destroy()
Don't call gst_vaapi_window_wayland_sync() when destroying the
wayland window instance, since it might lead to a lock at
gst_poll_wait() when more than one instances of vaapisink are
rendering in the same pipeline, this is because they share the
same window.

Since now all the frames are freed we don't need to freed the
private last_frame, since its address is invalid now.

https://bugzilla.gnome.org/show_bug.cgi?id=780442

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
2017-04-24 13:14:05 +02:00
Hyunjun Ko
ca314a25cc libs: window: wayland: null buffer at destroy()
Fix leakage of the last wl buffer.

VAAPI wayland sink needs to send a null buffer while destruction,
it assures that all the wl buffers are released. Otherwise, the last
buffer's callback might be not called, which leads to leak of
GstVaapiDisplay.

This was inspired by gstwaylandsink.

https://bugzilla.gnome.org/show_bug.cgi?id=774029

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-04-21 16:01:47 +02:00
Jagyum Koo
896a836f1d libs: window: wayland: rt event queue at destroy()
The proxy object of wl_buffer for the last frame remains in the
wl_map. Even though we call wl_buffer_destroy() in
frame_release_callback(), the proxy object remains without being
removed, since proxy object is deleted when wayland server sees the
delete request and sends 'delete_id' event.

We need to call roundtrip before destroying event_queue so that the
proxy object is removed. Otherwise, it would be mess up as receiving
'delete_id' event from previous play, when playing in the next
va/wayland window with the same wl_display connection.

https://bugzilla.gnome.org/show_bug.cgi?id=773689

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-04-21 16:01:46 +02:00
Víctor Manuel Jáquez Leal
9c3a4edf05 libs: window: wayland: cancel read at poll message
Always call wl_display_cancel_read() when an errno is set, but
different to EAGAIN or EINTR.

https://bugzilla.gnome.org/show_bug.cgi?id=780442
2017-04-21 16:01:34 +02:00
Jan Schmidt
bae56fe0c2 h264 decoder: Implement reset() for faster flush
Implement a custom reset() function for faster flushes
that just clear the reference pictures but don't reallocate
the DPB or clear out SPS/PPS

https://bugzilla.gnome.org/show_bug.cgi?id=781142
2017-04-12 10:43:49 +10:00
Jan Schmidt
a7a9b33ad9 Implement decoder reset on flush, rather than recreating
Clear decoders out on a flush but keep the same instance,
rather than completely recreating them. That avoids
unecessarily freeing and recreating surface pools
and contexts, which can be quite expensive

https://bugzilla.gnome.org/show_bug.cgi?id=781142
2017-04-12 10:43:49 +10:00
Víctor Manuel Jáquez Leal
bd2e304ea4 libs: window: don't add an unused function
The macro GST_VAAPI_OBJECT_DEFINE_CLASS_WITH_CODE only defines
a function that is never used, thus when compiling we might see
this warning (clang):

gstvaapiwindow.c:147:1: warning: unused function 'gst_vaapi_window_class' [-Wunused-function]
GST_VAAPI_OBJECT_DEFINE_CLASS_WITH_CODE (GstVaapiWindow,
^

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:22:38 +02:00
Víctor Manuel Jáquez Leal
8e8280efbf libs: window: remove surface_format member
Since we always convert to NV12, there is no need to keep a
variable for that. Let us hard code it.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:22:38 +02:00
Hyunjun Ko
c5b3577e88 libs: window: x11/wayland: use new api for conversion
Since gst_vaapi_window_vpp_convert_internal is created,
GstVaapiWindowX11/Wayland can use it for conversion.

Note that once it chooses to use vpp, it's going to use vpp
until the session is finished.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:20:38 +02:00
Hyunjun Ko
ccfbca733d libs: window: add gst_vaapi_window_vpp_convert_internal()
If a backend doesn't support specific format, we can use vpp for conversion
and make it playing.

This api is originated from GstVaapiWindowWayland and moved to GstVaapiWindow,
so that GstVaapiWindowX11 could use it.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:20:24 +02:00
Hyunjun Ko
4752f68a37 libs: window: x11/wayland: chaining up to GstVaapiWindow
Currently, GstVaapiWindowX11/Wayland are not descendants of GstVaapiWindow.
This patch chains them up to GstVaapiWindow to handle common members in GstVaapiWindow.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 16:41:41 +02:00
Víctor Manuel Jáquez Leal
3532dca16a libs: encoder: h265: chroma and luma with format
If the profile is main-10 the bit_depth_luma_minus8, in the sequence
parameter buffer, shall be the color format bit depth minus 8, 10-8
which is 2. Also for bit_depth_chroma_minus8.

This patch gets the negotiated sink caps format and queries its
luma's depth and uses that value to fill the mentioned parameters.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-07 12:04:51 +02:00
Víctor Manuel Jáquez Leal
d744aeb5fa libs: encoder: admit YUV420_10BPP as valid chroma
Accepts as supported the GST_VAAPI_CHROMA_TYPE_YUV420_10BPP chroma
type.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Víctor Manuel Jáquez Leal
48e21d6ba8 libs: encoder: h265: ensures profile given format
Set the VA profile as GST_VAAPI_PROFILE_H265_MAIN10 if the
configured color format is P010_10LE.

Otherwise, keep GST_VAAPI_PROFILE_H265_MAIN

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Víctor Manuel Jáquez Leal
e534ff5609 libs: encode: merge all possible surface formats
When the function gst_vaapi_encoder_get_surface_formats() was added
it was under the assumption that any VA profile of the specific codec
supported the same format colors. But it is not, for example the
profiles that support 10bit formats.

In other words, different VA profiles of a same codec may support
different color formats in their upload surfaces.

In order to expose all the possible color formats, if no profile is
specified via source caps, or if the encoder doesn't have yet a
context, all the possible VA profiles for the specific codec are
iterated and their color formats are merged.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Víctor Manuel Jáquez Leal
7153b4597d libs: encoder: pass profile to get_surface_formats()
In order to get the supported surface formats within a specific
profile this patch adds the GstVaapiProfile as property to
gst_vaapi_encoder_get_surface_formats().

Currently the extracted formats are only those related with the
default profile of the element's codec.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Víctor Manuel Jáquez Leal
9aa63e4595 libs: encoder: dummy context for get_surface_formats()
Instead of creating (if it doesn't exist, yet) the encoder's context
the method gst_vaapi_encoder_get_surface_formats() now it creates
dummy contexts, unless the encoder has it already created.

The purpose of this is to avoid setting a encoder's context with a
wrong profile.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Víctor Manuel Jáquez Leal
31d326c9ee libs: encoder: refactor init_context_info()
In order to generate vaapi contexts iterative, the function
init_context_info() is refactored to pass, as parameters the
GstVaapiContextInfo and the GstVaapiProfile.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Víctor Manuel Jáquez Leal
db7268117d libs: encoder: initialize chroma_type
Instead of initialize the chroma_type with a undefined value, which
will be converted to GST_VAAPI_CHROMA_TYPE_YUV420 by GstVaapiContext,
this patch queries the VA config, given the received
GstVaapiContextInfo's parameters, and gets the first response.

In order to get the GstVaapiChromaType value, also it was needed to
add a new utility function: to_GstVaapiChromaType(), which, given a
VA_RT_FORMAT_* will return the associated GstVaapiChromaType.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00
Scott D Phillips
123672a9bd libs: encoder: vp9: Fix initialization of ref_list
gcc 7.0.1 gives a memset-elt-size warning in gst_vaapi_encoder_vp9_init:

 'memset' used with length equal to number of elements without
 multiplication by element size [-Werror=memset-elt-size]

https://bugzilla.gnome.org/show_bug.cgi?id=780947
2017-04-06 11:03:12 +02:00
Sreerenj Balachandran
be990f5ed4 encoder: h264: Fix Backward ReferencePicture flag setting
This is a regression introduced by e829b62 which
override the reference flags and caused issues with
latest intel-vaapi-driver.
2017-03-31 14:14:08 -07:00
Víctor Manuel Jáquez Leal
834557d5b6 libs: encoder: h265: fix code style
Trivial patch to remove a double ';' as end of instruction.
2017-03-29 13:24:41 +02:00
Sreerenj Balachandran
dbbe340906 encoder: h264: Fix B frame encoding artifacts
The current implementation is updating the POC values only
in Slice parameter Buffer.But we are not filling the
picture order count and reference flags in VAPictureH264
while populating VA Picture/Slice structures.The latest
intel-vaapi-driver is directly accessing the above fields
from VAPicutreH264 provided as RefPicLists, which resulted
some wrong maths and prediction errors in driver.

https://bugzilla.gnome.org/show_bug.cgi?id=780620
2017-03-28 10:53:20 -07:00
Víctor Manuel Jáquez Leal
7f8b325450 libs: encoder: h265: remove unused macro definition
Since the h265 encoder doesn't use GValueArray, there is no need to
disable the Glib deprecation warnings, thus removing the macro
definition.
2017-03-21 16:13:56 +01:00
Hyunjun Ko
9ed6ac1f76 libs: h26x: adds gst_vaapi_utils_h26x_write_nal_unit()
Implements gst_vaapi_utils_h26x_write_nal_unit(), which writes NAL
unit length and data to a bitwriter.

Note that this helper function applies EPB (Emulation Prevention
Bytes), since otherwise produced codec_data might be broken when
decoder/parser considering EPB, starts parsing.

See sections 7.3 and 7.4 of the H264 and H264 specifications, which
describes the emulation_prevention_three_byte.

https://bugzilla.gnome.org/show_bug.cgi?id=778750

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2017-03-20 19:02:04 +01:00
Hyunjun Ko
49b370ed60 libs: utils: h26x: create vaapiutils_h26x
Since there is duplicated code in h264/265 encoder, we could
refactor it to avoid duplicated code.

https://bugzilla.gnome.org/show_bug.cgi?id=778750

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2017-03-20 18:11:00 +01:00
Hyunjun Ko
257cfb61fe libs: encoder: h264/5: fix wrong return value
https://bugzilla.gnome.org/show_bug.cgi?id=778750
2017-03-17 12:54:27 +01:00
Hyunjun Ko
7f38b3b9f2 libs: encoder: h265: fix reserved length of bits
Fix reserved length of bits for bit_depth_luma_minus8 and bit_depth_chroma_minus8

https://bugzilla.gnome.org/show_bug.cgi?id=778749
2017-03-14 16:54:39 +01:00
Thomas Petazzoni
159e3c3f08 O_CLOEXEC needs _GNU_SOURCE defined
From man open(2):

    The O_CLOEXEC, O_DIRECTORY, and O_NOFOLLOW flags are not specified
    in POSIX.1-2001, but are specified in POSIX.1-2008.  Since glibc
    2.12, one can obtain their definitions by defining either
    _POSIX_C_SOURCE with a value greater than or equal to 200809L or
    _XOPEN_SOURCE with a value greater than or equal to 700.  In glibc
    2.11 and earlier, one obtains the definitions by defining
    _GNU_SOURCE.

And indeed, with the uClibc C library, O_CLOEXEC is not exposed if
_GNU_SOURCE is not defined. Therefore, this commit fixes the build of
gstreamer-vaapi with the uClibc C library.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

https://bugzilla.gnome.org/show_bug.cgi?id=779953
2017-03-14 16:12:27 +01:00
Hyunjun Ko
c4ef779931 libs: window: wayland: handle more VAStatus to use vpp
Since the commit landed https://github.com/01org/intel-vaapi-driver/pull/55,
we should consider more returned VAStatus to use vpp.

https://bugzilla.gnome.org/show_bug.cgi?id=779400
2017-03-02 02:22:26 +01:00
Hyunjun Ko
6468bf2ddf libs: encoder: ensure profile when context initialization
We can't be sure that encoder's profile is assgined already or not
at context initialization.

https://bugzilla.gnome.org/show_bug.cgi?id=779120
2017-02-28 18:26:44 +01:00
Hyunjun Ko
04a844ced0 libs: encoder: set rate control info only when query succeed
Currently, it set rate control information even when query fails.
In addition, it doesn't update any more since the flag
got_rate_control_mask is set to TRUE.

https://bugzilla.gnome.org/show_bug.cgi?id=779120
2017-02-28 18:26:44 +01:00
Víctor Manuel Jáquez Leal
a0a2f7bfe8 libs: encoder: caps can change at any time
The encoder should be able to change its caps even it is already
processing a stream.

This is suppose to happen after a flush so the codedbuf_queue should
be empty.

https://bugzilla.gnome.org/show_bug.cgi?id=775490
2017-02-22 05:19:06 +01:00
Víctor Manuel Jáquez Leal
7b3a51f145 libs: encoder: h265: bail if nal unit type fails
Bail out if the NAL unit type is not recognized.

https://bugzilla.gnome.org/show_bug.cgi?id=778782
2017-02-22 05:19:06 +01:00
Víctor Manuel Jáquez Leal
d6738f3f93 libs: decoder: h264,h265 avoid uninitialized variable
Configuring GCC to verify possible usage of uninitialized variables,
shows that found_index might be used without previous assignation.

This patch assigns a initial value to found_index, also avoid a
branching when returning the result value.

https://bugzilla.gnome.org/show_bug.cgi?id=778782
2017-02-16 18:46:35 +01:00
Scott D Phillips
884e0bece2 build: rename USE_HEVC_DECODER to USE_H265_DECODER
Rename to be consistent with H.264 and also H.265 encoder. The
meson build assumed this was already consistently named, and so
previously was not able to actually build the H.265 decoder.

https://bugzilla.gnome.org/show_bug.cgi?id=778576
2017-02-16 17:27:50 +01:00
Hyunjun Ko
b6a3e88059 libs: encoder: vp8: add CBR encoding mode
This patch enables the Constant BitRate encoding mode in VP8 encoder.
Basically it adds the configuration parameters required by libva to
CBR enconding.

Original-Patch-By: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=749950
2017-02-10 13:11:21 +01:00
Hyunjun Ko
ffc5b43da7 libs: encoder: vp8: fix bitrate calculation
Base encoder's unit of bitrate is in Kbps. We should honor it so
we use the value of bitrate in VA, in which is expressed in bps.

https://bugzilla.gnome.org/show_bug.cgi?id=749950
2017-02-10 13:10:10 +01:00
Scott D Phillips
412dd13e86 vaapi: add meson build
https://bugzilla.gnome.org/show_bug.cgi?id=778250
2017-02-09 11:27:44 +01:00
Scott D Phillips
3cc4eb7b81 make: remove gstvaapiversion.h generation
https://bugzilla.gnome.org/show_bug.cgi?id=778250
2017-02-09 11:27:44 +01:00
Hyunjun Ko
2d463f79f2 libs: utils: add HEVC profiles representation
https://bugzilla.gnome.org/show_bug.cgi?id=778318
2017-02-08 10:42:28 +01:00
Hyunjun Ko
d89a3bd258 libs: decoder: h264: reduce frame number of gaps
Reduce frame num gaps so that we don't have to create unnecessary
dummy pictures, just throw them away.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=777506
2017-02-07 11:30:02 +01:00
Julien Isorce
4f037a036b libs: surface: add gst_vaapi_surface_{set,peek}_buffer_proxy()
These functions are useful when a dmabuf-based memory is instantiated in
order to relate the generated buffer @proxy with the processed @surface.

https://bugzilla.gnome.org/show_bug.cgi?id=755072
2017-02-02 20:33:36 +01:00
Julien Isorce
7fc1b70ff6 libs: bufferproxy: gst_vaapi_buffer_proxy_{set,peek}_mem()
This patch adds a GstMemory as a variable member of the buffer proxy,
because we will need to associate the buffer proxy with the memory
which exposes it. Later, we will know which memory, in the video buffer
pool, is attached to the processed surface.

https://bugzilla.gnome.org/show_bug.cgi?id=755072
2017-02-02 20:33:36 +01:00
Julien Isorce
69a2406a20 libs: bufferproxy: add gst_vaapi_buffer_proxy_release_data()
Adds an API to request the user's data release in the buffer proxy.

https://bugzilla.gnome.org/show_bug.cgi?id=755072
2017-02-02 20:33:36 +01:00
Hyunjun Ko
a5650e8dc3 libs: utils: return NULL if failed to get surface formats
Thus, when generating the allowed caps, the element will throw a
warning and it will use its caps template.

This behavior might be a bug in the VA driver.

https://bugzilla.gnome.org/show_bug.cgi?id=775490
2017-02-01 20:01:11 +01:00
Víctor Manuel Jáquez Leal
65c16145a5 Revert "vaapidisplay: mark X11 display as compatible with EGL"
This reverts commit 200b1baabc.
2017-02-01 16:20:08 +01:00
Víctor Manuel Jáquez Leal
8654829628 vaapidecode: update internal decoder sink caps
When a new sink caps arrive the internal decoder state is updated
and, if it is, request a downstream renegotiation.

Previously, when new caps arrived the whole decoder where destroyed
and recreated. Now, if the caps are compatible or has the same codec,
the internal decoder is kept, but a downstream renegotiation is
requested.

https://bugzilla.gnome.org/show_bug.cgi?id=776979
2017-01-18 11:30:49 +01:00
Víctor Manuel Jáquez Leal
da7500de3f vaapi: bump ifdef to API 0.40.0 for log redirect
vaSetInfoCallback() is not released yet. It is going to appear in
VA-API 0.40.0
2017-01-12 12:54:34 +01:00
Sebastian Dröge
08dea01bf4 vaapiutils: Fix compilation with latest and previous libva releases
vaSetInfoCallback() was defined after 0.39.4 / 1.7.3, so check for
0.39.5 instead.
2017-01-12 13:45:29 +02:00
Víctor Manuel Jáquez Leal
1e0b3c2f74 libs: display: redirect logging at initialize
Redirect libva's logs to GStreamer logging mechanism. This is
particularly useful when VA is initialized, because it always logs
out the drivers details.

In order to achieve this a new helper function was added as a wrapper
for the vaInitialize() function.

https://bugzilla.gnome.org/show_bug.cgi?id=777115
2017-01-11 16:11:30 +01:00
Hyunjun Ko
58e7b575bb libs: decoder: h264: don't update cloned attributes
If the frame is a cloned picture, its PTS comes from its parent
picture.  In addition, the base decoder doesn't set a valid PTS to
the frame corresponding to the cloned picture.

https://bugzilla.gnome.org/show_bug.cgi?id=774254
2017-01-10 12:54:39 +01:00
Víctor Manuel Jáquez Leal
dde4db3b3e libs: surface: fix error handling code style 2016-12-14 17:25:44 +01:00
Hyunjun Ko
4e2049d108 libs: encoder: add gst_vaapi_encoder_get_surface_formats()
This method will return the valid surface formats in the current
config. If the are no VAConfig it is created with the information
available.

https://bugzilla.gnome.org/show_bug.cgi?id=769266

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-12-07 16:47:18 +01:00
Hyunjun Ko
72e26ed30b libs: encoder: split set_context_info()
Split set_context_info() adding init_context_info() which only
initialises the GstVaapiContextInfo structure inside GstVaapiEncoder
required for VAConfig.

https://bugzilla.gnome.org/show_bug.cgi?id=769266

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-12-07 16:47:18 +01:00
Hyunjun Ko
41d27b5e2e libs: context: skip VAContext if no frame size
If GstVaapiContextInfo has just initial information, without frame's
width and height, skip the creation of the VAContext, just keep the
VAConfig.

https://bugzilla.gnome.org/show_bug.cgi?id=769266

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-12-07 16:47:01 +01:00
Hyunjun Ko
059cc59a29 libs: context: split context_create()
Split the funcion context_create() into context_create() and
config_create().

Decoupling VAConfig and VAContext during context creation, we could
query the VAConfig for the supported surface's formats without creating
a VAContext.

https://bugzilla.gnome.org/show_bug.cgi?id=769266
2016-12-07 10:21:46 +01:00
Víctor Manuel Jáquez Leal
7aeefb0990 libs: drm: find render node in hybrid system
Originally the drm backend only tried to open the first render node
found. But in hybrid system this first render node might not support
VA-API (propietary Nvidia driver, for example).

This patch tries all the available nodes until a finding one with a
VA-API supported driver.

https://bugzilla.gnome.org/show_bug.cgi?id=774811

Original-patch-by: Stirling Westrup <swestrup@gmail.com> and
                   Reza Razavi <reza@userful.com>
2016-12-06 17:33:42 +01:00
Dominique Leuenberger
8effd68975 build: add LIBVA_WAYLAND_CFLAGS to libgstvaapiegl
In case libva-wayland has its headers not installed in default
locations (like /usr/include), the build fails to include "wayland-client.h":

   CC       libgstvaapi_egl_la-gstvaapiutils_egl.lo
 In file included from gstvaapidisplay_wayland.h:27:0,
                  from gstvaapidisplay_egl.c:35:
 /usr/include/va/va_wayland.h:31:28: fatal error: wayland-client.h: No such file or directory
  #include <wayland-client.h>

As we already passed VA_CLAGS, /usr/include/va/va_wayland.h could be found, but it is
our fault not to instruct the system that we ALSO care for va_wayland. We correctly query
for libva-wayland.pc in configure and use this in other places as well. It is thus only
correct and consequent, to do it also at this spot.

https://bugzilla.gnome.org/show_bug.cgi?id=773946
2016-11-25 09:54:22 +01:00
Víctor Manuel Jáquez Leal
b09f592a4c libs: decoder: add _get_surface_formats()
This function exposes the available formats of the surfaces in the the current
context to the plugins.
2016-11-03 13:04:09 +01:00
Víctor Manuel Jáquez Leal
71264ede6f libs: context: ensure context formats
This patch ensures to get the formats, as filter does, available in the
decoder / encoder context.

The context fills up the array as soon it is created, otherwise the pipeline
could get stalled (perhaps this is a bug in my HSW backend).

https://bugzilla.gnome.org/show_bug.cgi?id=752958
2016-11-03 13:04:09 +01:00
Víctor Manuel Jáquez Leal
d1581ba557 libs: move get_surface_formats to utils_core
The query of all the supported formats for a VA config were only used by the
postprocessor (vaapifilter). But, in order to enable the vaapidecoder to
negotiate a suitable raw format with downstream, we need to query these
formats against the decoder's config.

This patch is the first step: moves the code in filter's ensure_image() to a
generic gst_vaapi_get_surface_formats() in vaapiutils_core, so it can be
shared later by the decoder.

https://bugzilla.gnome.org/show_bug.cgi?id=752958
2016-11-03 13:04:09 +01:00
Víctor Manuel Jáquez Leal
b1f6da98de libs: fix code style for errors 2016-11-03 12:51:44 +01:00
Víctor Manuel Jáquez Leal
5ff513ec27 libs: vaapitexturemap: trivial code-style fix 2016-11-03 08:31:16 +01:00
Víctor Manuel Jáquez Leal
be65508753 libs: display: egl: avoid recreate native display
Instead of passing the native descriptor of the display, just pass the received
GstVaapiDisplay and reuse it.
2016-11-03 08:27:57 +01:00
Hyunjun Ko
313860dea4 libs: window: egl: pass native va display
When creating a GstVaapiWindowEGL, it also creates native window by its own
native display. It should pass the native display, either X11 or Wayland.

https://bugzilla.gnome.org/show_bug.cgi?id=768266
2016-11-03 08:27:40 +01:00
Hyunjun Ko
185da3d1a4 libs: display: GstVaapiDisplay as GstObject descendant
This patch is to change the inheritance of GstVaapiDisplay to GstObject,
instead of GstVaapiMiniObject. In this way we can use all the available
infrastructure for GObject/GstObject such as GstTracer, GIR, etc.

In addition, a new debug category for GstVaapiDisplay is created to make it
easier to trace debug messages. It is named "vaapidisplay" and it transverse
all the VA display backends (DRM, GLX, EGL, Wayland, ...)

This patch is a step forward to expose GstVaapiDisplay for users in a future
library.

https://bugzilla.gnome.org/show_bug.cgi?id=768266

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-11-03 08:24:59 +01:00
Hyunjun Ko
abc2480b10 libs: minor correction for logical consistency
GstVaapiDecode is a descendant of GstVaapiMiniObject, so, thought we should
use its methods, even though it doesn't change functionality.

GstVaapiPixmap, GstVaapiTexture and GstVaapiWindow are descendant of
GstVaapiObject, hence its methods shall be used.

https://bugzilla.gnome.org/show_bug.cgi?id=772554
2016-10-25 11:35:22 +02:00
Víctor Manuel Jáquez Leal
fb95a79818 build: clean up the dlopen usage 2016-10-19 16:14:34 +02:00
Víctor Manuel Jáquez Leal
ef3ee8b7bb encoder: h264,h265: fix regression in offset count
In commit dc35dafa a bug was introduced because I assumed that
GST_CLOCK_TIME_NONE is zero when is -1. This patch fixes that mistake.

https://bugzilla.gnome.org/show_bug.cgi?id=772259
2016-10-19 16:14:34 +02:00
Víctor Manuel Jáquez Leal
9414815383 libs: display: egl: remove unused header include
The header gmodule.h is not used since the library dynamic loading for EGL
display was removed.

https://bugzilla.gnome.org/show_bug.cgi?id=772599
2016-10-08 13:08:29 +02:00
Hyunjun Ko
a80e10ac5c libs: display{egl,glx}: cache GstVaapiTextures
instances when created and reuse

This patch improves performance when glimagesink uploads a GL texture.

It caches the GStVaapiTexture instances in GstVaapiDisplay{GLX,EGL}, using an
instance of GstVaapiTextureMap, so our internal texture structure can be found
by matching the GL texture id for each frame upload process, avoiding the
internal texture structure creation and its following destruction.

https://bugzilla.gnome.org/show_bug.cgi?id=769293

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-09-22 17:01:59 +02:00
Hyunjun Ko
f974c91d73 libs: vaapitexturemap: implement GstVaapiTextureMap
Implement GstVaapiTextureMap object, which caches VAAPI textures, so them can be
reused. Internally it is a hash table.

Note that it is GstObject based rather than GstVaapiObject, as part of the future
converstion to GstObject of most of the code.

https://bugzilla.gnome.org/show_bug.cgi?id=769293

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-09-22 14:19:05 +02:00
Sreerenj Balachandran
0fae277d34 encoder: vp8: Increase the allocation size for coded buffer
We are not getting enough compression for some streams and
encoded frame end up with more size than allocated.
Assuming a compression ratio of 4, which should be good enough
for holding the frames.

https://bugzilla.gnome.org/show_bug.cgi?id=771528
2016-09-21 09:55:53 +03:00
Sreerenj Balachandran
44a90c196d encoder: vp9: Fix refresh frame flag setting
While doing the mode-1 referece picture selection,
the circular buffer logic was not correctly setting the
refresh frame flags as per VP9 spec.
Make sure refresh_flag[0] get updated correclty after
each cycle of GST_VP9_REF_FRAMES.

https://bugzilla.gnome.org/show_bug.cgi?id=771507
2016-09-21 09:52:21 +03:00
Víctor Manuel Jáquez Leal
9afa0ce471 vaapidecode: codec_data minimal size is 7
When the format of a H.264 stream is AVC3, the SPS and PPS are inside the
stream, not in the codec_data, so the size of codec_data might be 7.

This patch reduces the minimal size of the codec_data buffer from 8 to 7.

https://bugzilla.gnome.org/show_bug.cgi?id=771441
2016-09-15 10:38:08 +02:00
Víctor Manuel Jáquez Leal
574ff693a5 libs: surface: ensure composite overlay is not bigger
Ensure the composition overlay rectangle (subtitles) is not bigger than
the surface where it is going to be composited and rendered.

https://bugzilla.gnome.org/show_bug.cgi?id=766978
2016-09-08 17:06:57 +02:00
Víctor Manuel Jáquez Leal
7ebef58093 decoder: vc1: fails only on advanced profile
In commit 2eb4394 the frame coding mode was verified for progressive
regardless the profile. But the FCM is only valid in the advanced
profile. This patch checks for the advanced profile before verifying FCM for
progressive.

https://bugzilla.gnome.org/show_bug.cgi?id=769250
2016-09-06 12:39:22 +02:00
Scott D Phillips
2eb439416d decoder: vc1: Fail only on actual interlaced frames
In the earlier patch:

 f31d9f3 decoder: vc1: Print error on interlaced content

Decoding would error out if the interlace flag was set in the
sequence bdu. This isn't quite right because a video can have this
flag set and yet not have any interlaced pictures.

Here instead we error out when either parsing a field bdu or
decoding a frame bdu which has fcm set to anything other than
progressive.

Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=769250
2016-09-05 12:33:03 +02:00
Scott D Phillips
f31d9f37b6 decoder: vc1: Print error on interlaced content
Interlaced video is as yet unsupported in the vc1 element. Print
an error to make that more obvious.

https://bugzilla.gnome.org/show_bug.cgi?id=769250
2016-08-16 11:58:38 +03:00
Víctor Manuel Jáquez Leal
ad3b45ebc4 encoder: h264: fix C90 mixed declarations and code
Commit 4259d1a introduced this compilation error. This patch fixes it.
2016-08-10 13:29:45 +02:00
Víctor Manuel Jáquez Leal
68b9ab7818 encoder: h264,h265,mpeg2,vp8: use gst_util_uint64_scale() for bitrate
Use gst_util_uint64_scale() to calculate bitrate instead of normal arithmetic
to avoid overflows, underflows and loss of precision.

https://bugzilla.gnome.org/show_bug.cgi?id=768458
2016-08-10 12:20:48 +02:00
Víctor Manuel Jáquez Leal
4259d1aec7 vaapiencode: h264,h265: validate fps numerator
Validate that fps numerator is non-zero so it can be used to calculate
the duration of the B frame.

Also it gst_util_uint64_scale() is used instead of normal arithmetic in
order to aviod overflows, underflows and loss of precision.

https://bugzilla.gnome.org/show_bug.cgi?id=768458
2016-08-10 12:20:48 +02:00
Víctor Manuel Jáquez Leal
27429ce676 libs: egl: remove dynamic library loading code
Since the upstream of gstreamer-vaapi, the library is not a public shared
object anymore. But the EGL support depended on this dynamic library, so the
EGL support was broken.

This patch removes the dynamic library loading code and instantiates the
EGL display using either X11 or Wayland if available.

https://bugzilla.gnome.org/show_bug.cgi?id=767203
2016-07-22 17:23:23 +02:00
Víctor Manuel Jáquez Leal
7472826a36 Revert "gstvaapisurface_drm: release image when done"
This reverts commit 1dbcc8a0e1  and commit
372a03a9e3.

While the dmabuf handle is exported, the derive image must exist, otherwise
the image's VA buffer is invalid, thus the dmabuf handle is never released,
leading into a file descriptors leak.
2016-07-22 17:15:58 +02:00
Víctor Manuel Jáquez Leal
3efc2f70b7 encoder: h265: fix code-style 2016-07-22 17:15:38 +02:00
Hyunjun Ko
cc6df605a1 vaapipostproc: checking and updating filter parameter only when it's set
This patch is to avoid checking filter value at every frame.

https://bugzilla.gnome.org/show_bug.cgi?id=751876
2016-07-22 12:08:20 +02:00
Allen Zhang
d9ef88230f decoder: h265: handle the SEI NAL units included in codec_data
The prefix/suffix SEI nal units can appear in codec_data too
which weren't handled before. Parse these SEI headers to
fix the segfault.

https://bugzilla.gnome.org/show_bug.cgi?id=768544
2016-07-21 11:24:31 +03:00
Sreerenj Balachandran
6c6007ad94 encoder: h264: Fix MVC encode while enabling dct8x8
Pack the transform_8x8_mode_flag and other necessary rbsp data
in packed_pps header for MVC encode.

https://bugzilla.gnome.org/show_bug.cgi?id=768647
2016-07-15 14:41:27 +03:00
Jagyum Koo
0d1d097273 wayland: Error check before using cached wl_display
A planar(or some other) buffer allocation may fail on the driver, then
the wayland connection becomes invalid, not able to send request or
receive any event. So we need to set up a new wayland connection if
there's an error detected on the cached wl_display.

https://bugzilla.gnome.org/show_bug.cgi?id=768761

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-07-14 12:18:10 +02:00
Víctor Manuel Jáquez Leal
fcc08627e5 decoder: vc1: flush dpb only if opened
Flush the decode picture buffer, if and only if, the decoder is
started. Otherwise the dpb structure might be NULL.

https://bugzilla.gnome.org/show_bug.cgi?id=742922
2016-07-11 10:44:06 +02:00
Hyunjun Ko
e8fabf6a99 vaapisink: add support for GST_TAG_IMAGE_ORIENTATION
https://bugzilla.gnome.org/show_bug.cgi?id=765798
2016-07-05 20:17:12 +02:00
Víctor Manuel Jáquez Leal
22647090be utils: report VP9 profiles
Add VP9Profile0-3 name mapping.
2016-06-28 16:34:30 +02:00
Scott D Phillips
60cd511fad remove unused glibcompat.h
glibcompat.h is no longer doing anything. Remove it.

Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=767886
2016-06-23 12:47:52 +02:00
Scott D Phillips
4aec5bdd72 encoder: h264: Use high profile by default
Change defaults for max-bframes, cabac, and dct8x8 to be enabled
by default. This will cause the default profile to be high instead
of baseline. In most situations this is the right decision, and
the profile can still be lowered in the case of caps restrictions.

Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2016-06-23 12:28:50 +02:00
Hyunjun Ko
05cf583c97 decoder: h265: fix to release all dpb pictures
Without this, all dpb pictures are not released during flush,
because we used the global dpb_count variable for checking the
dpb fullness which get decremented in dpb_remove_index()
routine during each loop iteration.

https://bugzilla.gnome.org/show_bug.cgi?id=767934
2016-06-22 15:11:56 +03:00
Scott D Phillips
57ee937b8c decoder: vp9: Update comment about context resets
Clarify that vaapi context resets are never needed for vp9, but
that ensure_context() needs called when the size increases so that
new surfaces can be allocated.

Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=767474
2016-06-15 20:50:20 +02:00
Scott D Phillips
ad9fcb9386 gstvaapicontext: control reset_on_resize with option
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=767474
2016-06-15 20:50:20 +02:00
Víctor Manuel Jáquez Leal
73d1228896 libs: change gst_vaapi_surface_new_with_dma_buf_handle()
Instead of passing the data already in GstVideoInfo, let's just pass the
GstVideoInfo structure.

https://bugzilla.gnome.org/show_bug.cgi?id=765435
2016-06-08 10:19:01 +02:00
Sreerenj Balachandran
76c2e5fdb5 encoder: vp9: Add simple algorithms for reference picture selection
Added two modes(as properties) for reference picture selection:

ref-mode-0: AltRef and GoldRef pointing to the recent keyframe
and LastRef is pointing to the previous frame.

ref-mode-1: Previous frame (n) as LastRef , n-1 th frame as GoldRef
and n-2 th frame as AltRef

https://bugzilla.gnome.org/show_bug.cgi?id=766048
2016-05-30 12:18:04 +03:00
Sreerenj Balachandran
5dc63dbf5a encoder: vp9: Define Max frame width and height
https://bugzilla.gnome.org/show_bug.cgi?id=766048
2016-05-30 11:25:52 +03:00
Sreerenj Balachandran
1606d4bd77 encoder: vp9: Add more propertis for tuning encode quality
Added three tuning properties:
1: filter_level
2: sharpness_level
3: luma ac quant-table index

https://bugzilla.gnome.org/show_bug.cgi?id=766048
2016-05-30 11:25:03 +03:00
Sreerenj Balachandran
221fb9351a Add vp9 encoder support in libgstvaapi
https://bugzilla.gnome.org/show_bug.cgi?id=766048
2016-05-30 11:23:12 +03:00
Víctor Manuel Jáquez Leal
765a53d4c2 gstvaapisurface_drm: fix internal documentation 2016-05-26 11:44:18 +02:00
Víctor Manuel Jáquez Leal
372a03a9e3 gstvaapisurface_drm: fix code-style 2016-05-26 11:43:51 +02:00
Víctor Manuel Jáquez Leal
d69917ecca remove spurious gst_video_info_init()
gst_video_info_set_format() and gst_video_info_from_caps() call, internally,
gst_video_info_init(), hence it is not required to call it before them. This
patch removes these spurious calls.
2016-05-20 19:33:39 +02:00
Sreerenj Balachandran
c91de2398a encoder : h264: Disable b-frame encode in low-power mode
This is a workaround since vaapi-intel-driver doesn't have
support for B-frame encode when utilizing low-power-enc
hardware block.

Fixme :We should query the VAConfigAttribEncMaxRefFrames
instead of blindly disabling b-frame support and set b/p frame count,
buffer pool size etc based on the query result.

https://bugzilla.gnome.org/show_bug.cgi?id=766050
2016-05-13 11:45:20 +03:00
Sreerenj Balachandran
43af7c362c encoder: h264 : Use "tune=low-power" for enabling lowpower encode
Remove the duplicate property "low-power-enc" and use the
tune property for enabling low power encoding mode.

https://bugzilla.gnome.org/show_bug.cgi?id=766050
2016-05-13 11:44:57 +03:00
Sreerenj Balachandran
d446013ae4 gstvaapiencoder:Use internal api to dervie configured VAEntrypoint
https://bugzilla.gnome.org/show_bug.cgi?id=766050
2016-05-11 12:06:38 +03:00
Sreerenj Balachandran
32ee78bc52 encoder: h264: Add support of low power/high performance encoding mode
Added a new property "low-power-enc" for enabling low power
encoding mode. Certain encoding tools may not be available
with the VAEntrypointEncSliceLP.

https://bugzilla.gnome.org/show_bug.cgi?id=766050
2016-05-11 12:05:36 +03:00
Sreerenj Balachandran
8c1cfbaa1e Add mapping for Macroblock level rate control (VA_RC_MB) 2016-05-11 12:04:46 +03:00
Sreerenj Balachandran
c1abf37d0b gstvaapidisplay: Add VAEntrypointEncSliceLP support
https://bugzilla.gnome.org/show_bug.cgi?id=766050
2016-05-11 12:03:08 +03:00
Sreerenj Balachandran
7e4e597c6d gstvaapiprofile : Add VAEntrypointEncSliceLP definitions
This is for implementations that supports low_power/high_performance
variant for slice level encode.

https://bugzilla.gnome.org/show_bug.cgi?id=766050
2016-05-11 12:02:44 +03:00
Sreerenj Balachandran
018ea8b2fc encoder: h265: Enable cu_qp_delta_enabled_flag for CBR
It seems driver requires enablement of cu_qp_delta_enabled_flag
for modifying QP values to controll the CBR mode bitrate.

https://bugzilla.gnome.org/show_bug.cgi?id=749852
2016-04-27 17:10:26 +03:00
Sreerenj Balachandran
7ddc7ea0bc encoder: h265: Add CBR Encoding support
https://bugzilla.gnome.org/show_bug.cgi?id=749852
2016-04-27 17:06:09 +03:00
Julien Isorce
8e7ebaa505 gstvaapisurface: explicitely clear TILING flag if dmabuf
https://bugzilla.gnome.org/show_bug.cgi?id=755072
2016-04-26 16:10:45 +01:00
Julien Isorce
1dbcc8a0e1 gstvaapisurface_drm: release image when done
Otherwise intel-vaapi-driver will fail to process the exported surface because
it will find it is currently derived, so considered as busy.

https://bugzilla.gnome.org/show_bug.cgi?id=755072
2016-04-26 16:06:12 +01:00
Michael Olbrich
1e32d62c1e libs: fix deleting a GstVaapiCodedBufferPool object
Call gst_vaapi_video_pool_finalize() in coded_buffer_pool_finalize().
Otherwise it is not called when the pool is destroyed and all objects
referenced by the GstVaapiVideoPool are never released.

https://bugzilla.gnome.org/show_bug.cgi?id=764993
2016-04-13 15:45:26 +02:00
Víctor Manuel Jáquez Leal
bb0b8ce7ab surface: destroy derived image
If gst_vaapi_image_new_with_image() fails, the created derived image should be
destroyed, otherwise the surface cannot be processed because is being used.

https://bugzilla.gnome.org/show_bug.cgi?id=764607
2016-04-07 18:25:56 +02:00
Sreerenj Balachandran
80c3bfe448 decoder: vp9: Align with the ABI changes in vp9 codecparser
The subsampling_x, subsampling_y, bit_depth, color_space and color_range
fileds are moved from GstVp9FrameHdr to the global GstVp9Parser structure.
These fields are only present in keyframe or intra-only frame, no need to
duplicate them for inter-frames.

https://bugzilla.gnome.org/show_bug.cgi?id=764082
2016-04-01 14:00:28 +03:00
Sreerenj Balachandran
641e9a47f6 decoder: vp9 : Add 10bit decoding support (Profile2)
https://bugzilla.gnome.org/show_bug.cgi?id=764082
2016-04-01 13:59:59 +03:00
Sreerenj Balachandran
4e5cf53ee0 gstvaapiporfile: Add more VP9 profile definitions
https://bugzilla.gnome.org/show_bug.cgi?id=764082
2016-04-01 13:57:45 +03:00
Sreerenj Balachandran
c009d29c00 decoder: h265: Fix offset calculation when there is more than one vps/sps/pps present in codec_data
The array_completeness, reserved bit and num_nal_units fields
in HEVCDecoderConfigurationRecord will be present for each VPS/SPS/PPS array list,
but not for each occurance of similar headers.

https://bugzilla.gnome.org/show_bug.cgi?id=764274
2016-03-30 14:37:21 +03:00
Sreerenj Balachandran
35fe2abc3e video-format: Keep the HW order preference while mapping to GstVideoFormats 2016-03-29 15:34:38 +03:00
Scott D Phillips
eea3f0cdb2 Add P010 video format support
The P010 video format is the native format used by the vaapi intel driver
for HEVCMain10 decode . Add support for planes and images of this video format.

https://bugzilla.gnome.org/show_bug.cgi?id=759181
2016-03-29 14:34:00 +03:00
Stephen
b64eaaad4d libs: x11: allows 30-bit colour depth
The colour depth is clamped to 24 when it is not equal {15,16,24,32}. But this
fails with the NVIDIA binary driver as it doesn't advertise a TrueColor visual
with a depth of 24 (only 30 and 32). Allowing the depth to be 30, lets everything
work as expected.

https://bugzilla.gnome.org/show_bug.cgi?id=764256
2016-03-29 12:08:55 +02:00
Sreerenj Balachandran
a486942ba2 decoder: h265: Fix offset calculation in codec_data parsing
https://bugzilla.gnome.org/show_bug.cgi?id=762922
2016-03-11 17:44:07 +02:00
Thiago Santos
0a9161ac3a vaapidecoder_h265: plug leak of h265 parsing info
If something goes wrong while parsing, the info object is
being leaked

https://bugzilla.gnome.org/show_bug.cgi?id=763121
2016-03-09 15:39:31 +01:00
Thiago Santos
2b47bf8c74 vaapidecoder_h264: plug leak of h264 parsing info
If something goes wrong while parsing, the info object is
being leaked

https://bugzilla.gnome.org/show_bug.cgi?id=763121
2016-03-09 15:39:31 +01:00
Vineeth TM
805a4733bf vaapidisplay: Fix uninitialized value error for VA attribute
https://bugzilla.gnome.org/show_bug.cgi?id=763362
2016-03-09 15:39:31 +01:00
Sreerenj Balachandran
1eabfad5c3 decoder: vp9: Assign values for profile and bit_depth from frame header
bit_depth field has added only in VA-API 0.39.0, added version check.
2016-03-04 10:51:42 +02:00
Lim Siew Hoon
0bae36bb88 Add memset to initialize value for VAEncSliceParameterBufferJPEG
https://bugzilla.gnome.org/show_bug.cgi?id=762850
2016-02-29 11:55:27 +02:00
Scott D Phillips
ffd5028a38 decoder: hevc: Fill dependent slice segment headers while parsing
Copy the data into the dependent slice segment header from the
corresponding independent slice segment header during parsing.

Previously the reference to the "previous" independent header was
held through the parsing phase and then dereferenced during the
decoding phase. This caused all dependent headers to be populated
with the data of the AU's last independent header instead of the
proper corresponding header.

https://bugzilla.gnome.org/show_bug.cgi?id=762352

Changes since v1:
- Reworded commit message
2016-02-23 10:55:02 +02:00
Thiago Santos
1f71503fc9 vaapidecoder_h265: fix parsing of NALU aligned data
Don't assume the whole buffer is a single NAL, instead look for the
next start code in case there are multiple NALs per buffer.

https://bugzilla.gnome.org/show_bug.cgi?id=762328
2016-02-22 12:09:35 +01:00
Thiago Santos
056a69cf2a vaapidecoder_h264: fix parsing of NALU aligned data
Don't assume the whole buffer is a single NAL, instead look for the
next start code in case there are multiple NALs per buffer.

https://bugzilla.gnome.org/show_bug.cgi?id=762328
2016-02-19 15:37:45 +01:00
Sebastian Dröge
734b8bad8f vaapi: Fix various compiler warnings and disable -Wredundant-decls for now 2016-02-16 15:09:01 +02:00
Víctor Manuel Jáquez Leal
60ebfbc595 libs: fix build error
gst_vaapi_buffer_proxy_{acquire_handle,release_handle,finalize,class}
functions are used only when libva's API version is greater than 0.36.0

This patch guards those functions completely rather than just their
content. The patch is a continuation of commit 38f8fea4

Original-patch-by: Vineeth TM <vineeth.tm@samsung.com>

https://bugzilla.gnome.org/show_bug.cgi?id=762055
2016-02-15 18:20:48 +01:00
Víctor Manuel Jáquez Leal
d76d78cc8e libs: fix compiler warnings
After setting the release flags, the compiler warns about a couple
initialized variables.

Also marked a couple of set variables as unused, because they are only
used for assertion.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 20:22:46 +01:00
Víctor Manuel Jáquez Leal
ac730d0a62 libs: humongous code style fix
As part of the upstreaming process of gstreamer-vaapi into the GStreamer
umbrella, we need to comply with the project's code style. This meant to
change a lot of code.

It was decided to use a single massive patch to update the code style.

I would like to apologize with the original developers of this code because of
the history breakage.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 20:03:47 +01:00
Víctor Manuel Jáquez Leal
4b5be5973e libs: small refactors to enhance the code style
As gst-indent generated ugly code in these cases, this patch changes the used
idiomatic into other one.

No functional changes were introduced.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 20:03:47 +01:00
Víctor Manuel Jáquez Leal
28d01c0857 libs: small code style fixes
This a set of small code style fixes detected as-is by gst-indent.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 12:45:30 +01:00
Víctor Manuel Jáquez Leal
02c0e6c183 libs: trivial comment style fixes
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 12:20:37 +01:00
Víctor Manuel Jáquez Leal
a0b325c19a libs: avoid gst-indent mess up
Guard pieces of code to avoid gst-ident to mess up the following code.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-03 12:20:37 +01:00
Tim-Philipp Müller
ab28dea7c1 Fix some more compiler warning
Two (false) compiler warnings about variables potentially
being used uninitialized, and one about a variable being
set but not used.

https://bugzilla.gnome.org/show_bug.cgi?id=759192
2016-02-02 17:19:42 +01:00
Tim-Philipp Müller
24168a2093 vaapi: fix 'ISO C90 forbids mixed declarations and code' compiler warnings
Declare variables at the beginning of a code block, which
is how it's done in GStreamer.

https://bugzilla.gnome.org/show_bug.cgi?id=759192
2016-02-02 16:17:43 +01:00
Sreerenj Balachandran
eb2daed2a7 decoder: vp9: Fix crop rectangle setting
Align with software vp9dec behaviour: Add crop rectangle
only if display_width/display_height is less than the
frame_hdr->width/frame_hdr->height
2016-02-02 16:17:43 +01:00
Víctor Manuel Jáquez Leal
2a80f4b909 decoder: update a deprecated function
Somehow this didn't show up earlier, but gst_adapter_prev_timestamp() got
deprecated since GStreamer 1.0.

This patch replace it with gst_adapter_prev_pts()

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-02 16:17:43 +01:00
Víctor Manuel Jáquez Leal
54011c22e2 build: fix when HEVC decoder is disabled
This a very pathological situation: when we have a HEVC encoder but not a HEVC
decoder.

The encoder needs functions that are only available when the decoder is
enabled.

This patch moves the utils functions into the generic sources, such as the
rest of the utils.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-02-01 12:21:57 +01:00
Víctor Manuel Jáquez Leal
1c722efe54 Remove old gst version guards
As gstreamer-vaapi now only supports from GStreamer 1.6, this patch removes
all the old GStreamer version guards.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-01-25 12:09:40 +00:00
Víctor Manuel Jáquez Leal
fa6144545f libs: remove versioning
Since we don't install libraries anymore, it makes no sense to keep
versioning them according to the gstreamer's version.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-01-20 10:19:07 +01:00
Víctor Manuel Jáquez Leal
f8bb674028 libs: make libraries no installables
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-01-19 13:16:43 +01:00
Víctor Manuel Jáquez Leal
bc54fa27e6 Do not install libgstvaapi headers
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-01-19 13:16:43 +01:00
Víctor Manuel Jáquez Leal
56fab31c00 Remove codecparsers submodule
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-01-19 12:49:11 +01:00
Michael Olbrich
e4ed64b731 wayland: free the frame in frame_release_callback()
This basically reverts 62c3888b76 (wayland:
decouple wl_buffer from frame).

Otherwise the frame may be overwritten while it is still used by the
compositer:

The frame done callback (frame_done_callback()) is called, when the
compositor is done processing the frame and hands it to the hardware.
The buffer release callback (frame_release_callback()) is called when the
buffer memory is no longer used.

This can be quite some time later: E.g. if weston (with the DRM backend)
puts the buffer on a hardware plane, then then buffer release callback is
called when the kernel is done with the buffer. This is usually when the
next frame is shown, so most likely after the frame done callback for the
next frame!

Since 70eff01d36 "wayland: sync() when
destroy()" the mentioned possible leak should no longer be a problem, so
reverting this change should cause no leaking buffers.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=758848
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2016-01-19 12:43:45 +01:00
Sreerenj Balachandran
61045041c4 Add 10 HEVC 10 bit decoding support
Only supporting vaapidecode ! vaapisink combination for now.

Missing dependencies:
1: No support for P010 video format in GStreamer
2: No support for P010 vaGetImage()/vaPutimage() in vaapi-intel-driver
3: As a result of 1&2 , we have no support for Vaapi Video memory mapping
   through GstVideoMeta.

Right now we only set chroma format (YUV420 with more than 8 bits per channel)
for surface pool and keeping GST_VIDEO_FORMAT as ENCODED. The underlying format
of the surfaces is implementation (driver) defined, which is P010.
2015-12-08 16:14:11 +02:00
Sreerenj Balachandran
9ccdbce4bd gstvaapisurfacepool: Add new API to create surface pool based on chroma type
This new API gst_vaapi_surface_pool_new_with_chroma_type() is for
creating a new GstVaapiVideoPool of GstVaapiSurfaces with the specified
chroam type and dimensions. The underlying format of the surfaces is
implementation (driver) defined.
2015-12-08 15:16:00 +02:00
Sreerenj Balachandran
009c2c72c9 Add definitions for YUV420 with more than 8 bits per channel 2015-12-07 19:06:28 +02:00
Sreerenj Balachandran
a2171ea0eb gstvaapiporfile: Fix string representation of HEVCMain10 profile 2015-12-07 17:26:24 +02:00
Víctor Manuel Jáquez Leal
4897d96945 texture: detect GL version and use the proper API
When receiving the texture from the application or the video sink, we must
know it size and border. To query the texture the API has changed according to
the OpenGL version used in the GL context of the application/vsink.

This patch checks the current context API type and queries the texture
according to this detected API.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=753099
2015-11-30 13:26:22 +01:00
Víctor Manuel Jáquez Leal
1e39b59ce8 texture: check for expected target and format
gst_vaapi_texture_glx_new_wrapped() only handles a GL_TEXTURE_2D target and
formats GL_RGBA or GL_BGRA.

This patch adds a debugging verification of those values.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=753099
2015-11-30 13:26:22 +01:00
Víctor Manuel Jáquez Leal
da835c7508 libs: add gl3_bind_texture_2d()
Since OpenGL3.1 removed the fixed pipelines[1] enabling 2D textures is not
needed. In particular, the Intel's Mesa implementation complains if it is
called.

This patch add a new binding function for 2D textures, without enabling
gl3_bind_texture_2d()[2].

1. https://www.opengl.org/wiki/Fixed_Function_Pipeline
2. https://www.opengl.org/wiki/Common_Mistakes#OOP_and_hidden_binding

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=753099
2015-11-30 13:26:22 +01:00
Víctor Manuel Jáquez Leal
03fed576f0 libs: add gl_get_current_api()
In order to know which OpenGL API use, we must detect the API type of current
context. This patch adds the function gl_get_current_api() which returns the
OpenGL API type.

This function is an adaptation of gst_gl_context_get_current_gl_api() from
GstGL.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=753099
2015-11-30 13:26:22 +01:00
Sreerenj Balachandran
d7bd0a4c10 build: Add gmodule dependency for libgstvaapi_egl
https://bugzilla.gnome.org/show_bug.cgi?id=756259
2015-11-30 13:03:04 +01:00
Sreerenj Balachandran
a24918037d decoder: vp9: Fix last/golden/altref frame index setting
Always fill VADecPictureParameterBufferVP9 last/golden/altref indices
based on what ever reference frame indices encoded in frame header.
2015-11-17 19:37:07 +02:00
Sreerenj Balachandran
2855682bd3 decoder: vp9: Fix PTS calculation of cloned frames 2015-11-16 18:22:55 +02:00
Sreerenj Balachandran
9a314a2430 decoder: vp9: Avoid unnecessary show_frame flag checking while doing picture output
We always set GST_VAAPI_PICTURE_FLAG_SKIPPED for DECODE_ONLY frames and the
gstvaapidecoder base calss is reponsible for handling those frames later on.
No need for explicit verification of frame header's show_frame in order to
do picture outputing.
2015-11-16 18:22:33 +02:00
Sreerenj Balachandran
26f895f4a8 decoder: vp9: Fix ref picture update while doing repeat frame
Don't try to do frame decoding and reference picture update
while receiving a vp9 frame having show_existing_frame flag
set as TRUE.
2015-11-16 18:22:14 +02:00
Sreerenj Balachandran
247896884b decoder: vp9: Add repeat-frame display handling
If vp9 frame header come up with show_existing_frame flag set,
we should duplicate the existing decoded frame as current frame to
be displayed.
2015-11-16 18:21:56 +02:00
Sreerenj Balachandran
8ee23ffd96 decoder: vp9: Add crop rectangle support.
Set crop rectange if:
There is display_width and display_height which is different from actual width/height
 or
The changed resolution is less than the actual configured dimension of surfaces
2015-11-13 19:46:01 +02:00
Sreerenj Balachandran
a48eebefd6 decoder: vp9: Fix the context and surface pool reset for multi resolution video
Unlike other decoders, vp9 decoder doesn't need to reset the
whole context and surfaces for each resolution change. Context
reset only needed if resolution of any frame is greater than
what actullay configured. There are streams where a bigger
resolution set in ivf header or webm header but actual resolution
of all frames are less. Also it is possible to have inter-prediction
between these multi resolution frames.
2015-11-13 19:23:05 +02:00
Sreerenj Balachandran
4aa523f8b4 decoder: vp9: Fill the VADecPictureParameterBufferVP9 width/height from frame header
Always fill width/height of VADecPictureParameterBufferVP9 from frame header.
Preliminary fix for supproting multi resolution video decode.
2015-11-13 18:58:33 +02:00
Sreerenj Balachandran
9b885c65ca decoder: vp9: Set lossless flag from frame header 2015-11-13 18:41:53 +02:00
Víctor Manuel Jáquez Leal
57b69d36f2 libs: vp9: remove unused symbols
clang complains about a couple variables and one label which were not
used. This patch removes them.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=757958
2015-11-11 19:18:52 +01:00
Víctor Manuel Jáquez Leal
f182fcfb37 libs: remove unneeded headers
Since gstvaapidisplay_glx.h do not expose gl.h/glx.h structures, it is not
required to include them in the header. It is not also required to include
them in gstvaapidisplay_glx.c, since gstvaapiutils_glx.h includes them and
exposes their structures (e.g. GLXPixmap).

Nonetheless, glext.h neither glxext.h are required to include, they are
already included conditionally by gl.h and glx.h, respectively.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=757577
2015-11-09 15:12:31 +01:00
Sreerenj Balachandran
db877e015d VP9: libgstvaapi: Add VP9 decoder 2015-11-06 15:12:51 +02:00
Sreerenj Balachandran
a3d63724dd VP9: gstvaapiprofile: Add profile definitions 2015-11-06 14:57:00 +02:00
Víctor Manuel Jáquez Leal
f6ae00a6bb decoder: h264: initialize PPS's slice_group_id
When the GstVaapiParserInfoH264 is allocated, the memory is not initialized,
so it contains random data.

When gst_h264_parser_parse_pps() fails, the PPS structure keeps slice_group_id
pointer uninitialized, leading to a segmentation fault when the memory is
freed.

This patch prevents this by initializing the slice_group_id before the PPS
parsing.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=754845
2015-09-15 19:36:37 +02:00
Sreerenj Balachandran
3bd6185f9f decoder: hevc: Don't flush dpb for EOS/EOB nal
Explicit flushing of dpb for EOS and EOB nal decoding is wrong,
the dpb_add() itself will handle the flusing(if needed) of dpb
for end of sequence and end of bitstream.

https://bugzilla.gnome.org/show_bug.cgi?id=754010
2015-09-04 22:19:55 +03:00
Sreerenj Balachandran
e90ea99df1 decoder: hevc: Fix the dpb_add() based on C.5.2.3
Follow the spec as it is in C.5.2.3, add the decoded frame to dpb
just after the PicLatencyCnt setting of existing dpb frames.

https://bugzilla.gnome.org/show_bug.cgi?id=754010
2015-09-04 22:11:10 +03:00
Sreerenj Balachandran
8799a8044d decoder: hevc: Fix the picture addition in dpb() based on spec H265 v3 (04/2015)
This fix is based on the V3 vesion of spec which was missing in older versions.

When the current picture has PicOutputFlag equal to 1, for each picture in the
DPB that is marked as "needed for output" and follows the current picture in output order,
the associated variable PicLatencyCount is set equal to PicLatencyCount + 1 (C.5.2.3).

https://bugzilla.gnome.org/show_bug.cgi?id=754010
2015-09-04 22:02:55 +03:00
Sreerenj Balachandran
ac92e6d5bc decoder: h265: Fix indentation 2015-09-04 22:00:36 +03:00
Jan Schmidt
b0194a1dc5 multiview: initial attempt at stereo/multiview support
Add support for marking caps and buffers for multiview or
stereoscopic output.

https://bugzilla.gnome.org/show_bug.cgi?id=750835
2015-08-31 17:51:56 +02:00
Víctor Manuel Jáquez Leal
cc63452d72 decoder: hevc: remove unused functions
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=754250
2015-08-31 13:13:24 +02:00
Sreerenj Balachandran
11716efdd3 decoder: hevc: Fix the scaling list scan order
The default scan order of scaling lists are up-right-diagonal
as per hevc specification. Use the newly implemented
uprightdiagonal_to_raster conversion codecparser APIs to
get the the scaling_list values in raster order, which is
what the VA intel driver requires.
2015-08-26 07:25:03 +03:00
Sreerenj Balachandran
279c49e8f2 decoder: hevc: sync with the codecparser changes
The Tile Scanning Conversion process (spec 6-3 and 6-4) is implemented
in codecparsers now. Remove the duplication from gstvaapidecoder_h265
2015-08-26 07:20:09 +03:00
Víctor Manuel Jáquez Leal
5fd4c8dffe wayland: rename is_cancelled to sync_failed
Since commit 065a18a3, the semantics of the variable is_cancelled did not make
sense. This commit renames this variable to sync_failed.
2015-08-24 19:24:07 +02:00
Olivier Crete
a83057cdb1 wayland: Don't return GST_FLOW_ERROR on flushing
Setting the sink to flushing causes gst_vaapi_window_wayland_sync() to
return FALSE which makes gst_vaapi_window_wayland_render() return
FALSE which ends up posting an ERROR message in
gst_vaapisink_show_frame_unlocked(). Solution is to just return TRUE
in the EBUSY case.

https://bugzilla.gnome.org/show_bug.cgi?id=753598
2015-08-24 19:23:54 +02:00
Víctor Manuel Jáquez Leal
ceb70c3ca6 surface pool config based on video info
First added the function gst_vaapi_video_format_get_best_native(), which
returns the best native format that matches a particular chroma type:

YUV 4:2:0 -> NV12, YUV 4:2:2 -> YUY2, YUV 4:0:0 -> Y800

RGB32 chroma and encoded format map to NV12 too.

That format is used to configure, initially, the surface's pool for the
allocator.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=744042
2015-08-13 17:20:19 +02:00
Victor Jaquez
002ac0ba9e gstvaapiencoder: validate chroma according to the VA's RT format
Before, only YUV420 color space where supported. With this patch, the
encoder is queried to know the supported formats and admits YUV422
color space if its available.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=744042
2015-08-13 17:20:19 +02:00
Sreerenj Balachandran
53a0e78948 decoder: hevc: Add calculation of WpOffsetHalfRangeC
This is necessary for finding ChromaOffsetL0/ChromaOffsetL1
prediction weight table values with out using any hard coding.

Fixme: We don't have parser API for sps_range_extension, so
assumed zero value for high_precision_offsets_enabled_flag.

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-13 05:07:52 +03:00
Sreerenj Balachandran
1f287dc71c decoder: hevc: Fix ChromaOffsetL0/ChromaOffsetL1 calculation
Based on ITU-T rec H265(4/2015): 7-56

This was a wrong equation in rec H265 (4/2013): 7-44...

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-13 04:09:44 +03:00
Sreerenj Balachandran
6669000580 decoder: hevc: Fix default value assignment of pred_weight_table 2015-08-13 04:08:03 +03:00
Sreerenj Balachandran
8939674a36 decoder: hevc: Fix the value assigning for delta_chroma_log2_weight_denom
Assign only if ChromaArrayType != 0..

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-13 03:48:43 +03:00
Sreerenj Balachandran
f7ce9a33d5 decoder: hevc: Add SEI parsing
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-10 05:50:50 +03:00
Sreerenj Balachandran
95b8ca0cda decoder: hevc: Workaround to recognize wrongly encoded main profile streams
HACK: This is a work-around to identify some main profile streams having wrong profile_idc.
There are some wrongly encoded main profile streams(eg: ENTP_C_LG_3.bin) which doesn't
have any of the profile_idc values mentioned in Annex-A, instead general_profile_idc
has been set as zero and having general_profile_compatibility_flag[general_profile_idc]
is TRUE. Assuming them as MAIN profile for now.

https://bugzilla.gnome.org/show_bug.cgi?id=753226

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-07 08:43:44 +03:00
Sreerenj Balachandran
696b446f09 decoder: hevc: Fix decoding of stream when it has temporal sublayers
We are calculating the dpb size based on max_dec_pic_buffering.
But if there are more than one temporal sublayers, we are supposed
to use the max_dec_pic_buffering[max_sub_layers_minus] for dpb
size calculation (Assuming HighestTid as max_sub_layers_minus).

Sample streams: TSCL_A_VIDYO_5.bin, TSCL_B_VIDYO_4.bin

https://bugzilla.gnome.org/show_bug.cgi?id=753226

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-06 04:01:24 +03:00
Sreerenj Balachandran
cb8b2af5f0 decoder: hevc: Fix the decoding of dependent slice segment
Decoding process for reference picture list construction needs to be
invoked only for P and B slice and the value for slice_type of dependent slice
segment should be taken from the previous independent slice segment header
of the same pic.

https://bugzilla.gnome.org/show_bug.cgi?id=753226

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-08-05 05:23:20 +03:00
Víctor Manuel Jáquez Leal
1e8610fc95 gstvaapicontext: fix the JPEG encoder attribs value
When we query for the VAConfigAttribEncJPEG, we get a value which packs the
VAConfigAttribValEncJPEG structure, but we did not assign it. This patch
assigns the returned value to the attribute.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=744042
2015-08-04 19:42:48 +02:00
Victor Jaquez
351496a304 gstvaapiencoder: framerate 0/1 is valid too
Framerate 0/1 is valid, and it is particularly useful for picture
encoding, such as jpeg. This patch makes the encoder to admit that
framerate.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=744042
2015-08-04 19:41:51 +02:00
Sreerenj Balachandran
47b78b7547 decoder: jpeg: Align with new API/ABI changes in codecparser
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-07-22 09:38:42 +03:00
Gwenole Beauchesne
52adebe779 decoder: h264: track previous reference frames.
Improve closure of gaps in frame_num by strictly following and trying
to fill them with previous reference frames. So, they are now tracked
thus avoiding insertion of dummy ("greenish") frames.
2015-07-20 15:25:46 +02:00
Gwenole Beauchesne
06147100f2 decoder: h264: fix integration of second field into the DPB.
If the new picture to be added to the DPB is not a first field, then
it shall be the second field of the previous picture that was added
before.

This removes the need for dpb_find_picture() now that we track the
immediately preceding decoded picture, in decode order.
2015-07-20 15:25:46 +02:00
Gwenole Beauchesne
d4ccae8398 decoder: h264: fix closure of "other-field" gap.
When a dummy "other-field" is inserted, it is assumed to inherit the
reference flags from the first field, and the sliding window decoded
reference picture marking process is also executed so that corrupted
frames are moved out as early as possible.

While doing so, we also try to output frames that now contain a single
valid field picture, prior to inserting any other picture into the DPB.
Note: this may be superfluous currently based on the fact that dpb_add()
combines the two most recent pairable fields, but this process would be
further simplified later on.
2015-07-20 15:25:46 +02:00
Gwenole Beauchesne
80a7ab0959 decoder: h264: track corrupted frames.
Mark the picture as "corrupted" if it is reconstructed from corrupted
references or if those references are fake, e.g. resulting from lost
frames.

This is useful for notifying the upper layer, or downstream elements,
that the decoded frame may contain artefacts.

https://bugzilla.gnome.org/show_bug.cgi?id=703921
2015-07-20 15:25:46 +02:00
Gwenole Beauchesne
939bdb08a5 decoder: add initial infrastructure for marking corrupted output.
Add initial infrastructure in core codec library and vaapidecode to mark
corrupted frames as such. A corrupted frame is such a frame that was
reconstructed from invalid references for instance.

https://bugzilla.gnome.org/show_bug.cgi?id=751434

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-07-20 15:25:46 +02:00
Víctor Manuel Jáquez Leal
1b76561d95 vaapidecoder: no wmv profiles gstreamer 1.4/1.2
This patch fix the auto-plugging problem in gstreamer 1.2 and gstreamer 1.4

Right now there is not a primary ranked parser for vc1 and the demuxers
delivers caps without specifying the profile. This situation is not an issue
for avdec_vc1 but for vaapidecode it is, which refuses to negotiate without a
explicit profile defined in the negotiated caps.

Nonetheless, in gstreamer 1.5 it seems not to be a problem since the
negotiation admits caps subsets try outs.

This patch solves the issue ignoring the profile negotiation in the caps. For
gstreamer < 1.5 the profile string is not handled, so the auto-plugging get
done without the vc1 parser, such as happens in gstreamer 1.5.

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2015-07-15 13:38:23 +02:00
Sreerenj Balachandran
86c4cdc8b6 build: Add missing CFLAGS to Makefile.am 2015-07-07 13:32:18 +03:00
Sreerenj Balachandran
9f0e054d9d gstvaapifilter: Only register STE property if it supported by corresponding VA library
Fix the regression introduced in commit eb465fb.
VAProcFilterSkinToneEnhancement is avaialbe from VA >= 0.36.

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-07-03 15:07:45 +03:00
Sreerenj Balachandran
eb465fb392 gstvaapifilter: Add guard for VAProcFilterSkinToneEnhancement
VAProcFilterSkinToneEnhancement is avaialbe from VA >= 0.36.

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-07-03 12:42:09 +03:00
Sreerenj Balachandran
6b88777627 encoder:h265: Fix the check for packed-header support
Use VA_ENC_PACKED_HEADER_* definition for checking.

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-07-02 21:57:38 +03:00
Sreerenj Balachandran
02d8092da9 encoder:h264: Fix the check for packed-header support
Use VA_ENC_PACKED_HEADER_* definition for checking.

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-07-02 21:37:56 +03:00
Sreerenj Balachandran
a260426194 encoder: h264: submit SEI buffering_period() and picture_timing() messages for CBR mode
One buffering_period() SEI message shall be present in every IDR access unit
when NalHrdBpPresentFlag is inferred to be equal to 1. This is the case when we
use a non-CQP mode, e.g. CBR. In other words, when
nal_hrd_parameters_present_flag is set to 1.

One picture_timing() SEI messages shall be present in every access unit
if CpbDpbDelaysPresentFlag is equal to 1 or pic_struct_present_flag is equal to 1

https://bugzilla.gnome.org/show_bug.cgi?id=722734
https://bugzilla.gnome.org/show_bug.cgi?id=751831

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-07-02 21:01:38 +03:00
Sreerenj Balachandran
cf9a0225c8 Fix build error for older VA-API versions
Provide guards for VA_SURFACE_ATTRIB_MEM_TYPE_KERNEL_DRM and
VA_SURFACE_ATTRIB_MEM_TYPE_DRM_PRIME which are only availble from
VA >= 0.36.
2015-06-18 12:20:37 +03:00
Víctor Manuel Jáquez Leal
1ef8c10aa8 vaapipostproc: add skin tone enhancement
Added the 'skin-tone-enhancement' property to vaapostproc.

https://bugzilla.gnome.org/show_bug.cgi?id=744088
2015-06-08 18:00:05 +02:00
Sreerenj Balachandran
2a2ecbe865 encoder: jpeg: Fix the packed header generation
This is a work-around to satisfy the va-intel-driver.
Normalize the quality factor and scale QM values (only for packed header
generation) similar to what VA-Intel driver is doing . Otherwise the
generated packed headers will be wrong, since the driver itself is
scaling the QM values using the normalized quality factor.

https://bugzilla.gnome.org/show_bug.cgi?id=748335

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-06-02 08:52:53 +03:00
Gwenole Beauchesne
d2791a7844 decoder: h264: fix uninitialized variables in avcC mode.
Fix uninitialized variables when decoding SPS and PPS NAL units from
"codec-data" buffers. This is particularly important when seeking ops
are involved, and the new persistent states are used more often.

https://bugzilla.gnome.org/show_bug.cgi?id=750094
2015-06-02 11:50:56 +02:00
Sreerenj Balachandran
619058b5b7 encoder: hevc: Fix the size over-flow for encoded buffer.
The approximation of 6 times compression ratio migh not
work in all cases. Especially when enabling I frames.
Provide large enough size for coded-buffer creation.
2015-05-28 10:52:48 +03:00
Sreerenj Balachandran
4d8eaf1918 encoder: vp8: Fix the size over-flow for encoded buffer.
The approximation of 4 times compression ratio will not
work in all cases. Especially when enabling I frames.
Provide large enough size for coded-buffer creation.
2015-05-28 10:43:20 +03:00
Sreerenj Balachandran
55775c6203 encoder: hevc: fix bug in multi slice encoding.
This is a work-around for satisfying the VA-Intel driver.
The driver only support slices begin from CTU row start address.

Multi-Slice encoding also requires a fix in va-intel-driver:
http://lists.freedesktop.org/archives/libva/2015-May/003351.html

https://bugzilla.gnome.org/show_bug.cgi?id=749854

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-05-28 05:43:49 +03:00
Gwenole Beauchesne
5abd2b90b6 decoder: h264: add initial support for loss of pictures.
Implement decoding process for gaps in frame_num (8.5.2). This
also somewhat supports unintentional loss of pictures.

https://bugzilla.gnome.org/show_bug.cgi?id=745048
https://bugzilla.gnome.org/show_bug.cgi?id=703921

Original-patch-by: Wind Yuan <feng.yuan@intel.com>
[fixed derivation of POC, ensured clone is valid for reference,
 actually fixed detection of gaps in FrameNum by PrevRefFrameNum]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-05-28 10:51:44 +02:00
Gwenole Beauchesne
8dd93e9c8a decoder: h264: add support for missing first field.
Try to identify missing first fields too, thus disregarding any
intermediate gaps in frames. We also assume that we keep the same
field sequence, i.e. if previous frames were in top-field-first
(TFF) order, then so are subsequent frames.

Note that insertion of dummy first fields need to operate in two
steps: (i) create the original first field that the current field
will inherit from, and (ii) submit that field into the DPB prior
to initializing the current (other) field POC values but after any
reference flag was set. i.e. copy reference flags from the child
(other field) to the parent (first field).

https://bugzilla.gnome.org/show_bug.cgi?id=745048
2015-05-28 10:51:43 +02:00
Gwenole Beauchesne
efaadfc7c0 decoder: h264: add support for missing second field.
Interlaced H.264 video frames always have two fields to decode and
display. However, in some cases, e.g. packet loss, one of the field
can be missing. This perturbs the reference picture marking process,
whereby the number of references available in DPB no longer matches
the expected value.

This patch adds initial support for missing field within a decoded
frame. The current strategy taken is to find out the nearest field,
by POC value, and with the same parity.

https://bugzilla.gnome.org/show_bug.cgi?id=745048
2015-05-28 10:51:43 +02:00
Gwenole Beauchesne
4776138d4a decoder: h264: improve tracking of "top-field-first" flag.
Try to maintain a "top-field-first" (TFF) flag, even if the H.264 standard
does not mandate it. This will be useful for tracking missing fields, and
also for more correct _split_fields() implementation for frames in the DPB.
2015-05-28 10:51:43 +02:00
Gwenole Beauchesne
b4e920843b decoder: h264: skip all pictures prior the first I-frame.
Don't try to decode pictures until the first I-frame is received within
the currently active sequence. There is no point is decoding and then
displaying frames with artifacts.
2015-05-28 10:51:43 +02:00
Gwenole Beauchesne
6229ad4f7f decoder: h264: fix processing of EOSEQ NAL.
Fix decoding of end_of_seq() NAL unit so that to not submit the current
picture for decoding again. This is pretty vintage code that dates back
before the existing of the whole decoder units machinery.

One issue that could be arising if that code was kept is that we could
have submitted a picture, and subsequently a GstVideoCodec frame, twice.
Once without the decode_only flag set, and once with that flag set. The
end result is that the GstVideoDecoder would release the codec frame
twice, thus releasing stale data.

In short, the piece of code that is removed by this patch is for once
completely obsolete for a while, and secondly error-prone in corner
cases.
2015-05-28 10:51:43 +02:00
Wind Yuan
a89a8cf1e3 decoder: add utility function to clone picture objects.
https://bugzilla.gnome.org/show_bug.cgi?id=703921

Signed-off-by: Wind Yuan <feng.yuan@intel.com>
[added cosmetic changes, fixed propagation of "one-field" flag to
 children, fixed per-codec clone modes (h264)]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-05-28 10:51:43 +02:00
Alban Browaeys
3857d5fce1 HEVC: decode: add missing va_dec_hevc header
Signed-off-by: Alban Browaeys <prahal@yahoo.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=749953
2015-05-27 23:43:16 +03:00
Gwenole Beauchesne
efc07f6bb1 mpeg2: fix PTS cache for GOP start.
If the GOP temporal sequence number (TSN) is interpolated from a valid
PTS, then we need to compensate that PTS corresponding to the start of
GOP with the next picture to be decoded, which shall be an I-frame,
based on its sequence number.

https://bugzilla.gnome.org/show_bug.cgi?id=748676
2015-05-27 16:43:34 +02:00
Víctor Manuel Jáquez Leal
d6255be939 mpeg2: avoid crash when seeking with debug logs
Move down the debug message when the state of the decoder is verified
so the slice header is not NULL.
2015-05-27 12:03:21 +02:00
Jan Schmidt
f1a60ec6a2 mpeg2: Avoid crashes and warnings on re-opened decoder after a seek
Reset state and add some checks for safe state to avoid a crash and
a warning after the decoder is destroyed/recreated during a seek.
2015-05-27 12:01:06 +02:00
Sreerenj Balachandran
78fb4bcf8d HEVC: decode: Replace clip3 implementation with glib CLAMP macro
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-05-26 06:04:11 +03:00
Sreerenj Balachandran
8762b04a19 HEVC: decode: Update Cropping Rectangle
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-05-26 05:33:33 +03:00
Sreerenj Balachandran
e623651d69 HEVC_Encode: Add HEVC(h265) encoder to core libgstvaapi
https://bugzilla.gnome.org/show_bug.cgi?id=748874

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-05-25 11:42:33 +03:00
Sreerenj Balachandran
e069ddf2b1 gstvaapiutils_h265: Add H265 Tier specific utility functions
-- New API: gst_vaapi_utils_h265_get_tier_from_string()
-- New API: gst_vaapi_utils_h265_get_tier_string()

https://bugzilla.gnome.org/show_bug.cgi?id=748874

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-05-25 11:23:16 +03:00
Víctor Manuel Jáquez Leal
89e41fc8e3 build: use git.mk
This patch handles dinamically the gitignore files with git.mk[1].

Removed the automake variable MAINTAINERCLANFILES in most of the
Makefile.am files since now it is handled by the top one.

1. https://github.com/behdad/git.mk/blob/master/git.mk

https://bugzilla.gnome.org/show_bug.cgi?id=749321
2015-05-18 16:14:46 +02:00
Víctor Manuel Jáquez Leal
70eff01d36 wayland: sync() when destroy()
Before pushing a the new frame, the render() method calls sync() to flush the
pending frames. Nonetheless, the last pushed frame never gets rendered, leading
to a memory leak too.

This patch calls sync() in the destroy() to flush the pending frames before
destroying the window.

Also a is_cancelled flag is added. This flag tells to not flush the event
queue again since the method failed previously or were cancelled by the user.

https://bugzilla.gnome.org/show_bug.cgi?id=749078
2015-05-18 15:25:52 +02:00
Michael Olbrich
11b9260b6c vaapisink: implement unlock/unlock_stop for wayland
Otherwise wl_display_dispatch_queue() might prevent the pipeline from
shutting down. This can happen e.g. if the wayland compositor exits while
the pipeline is running.

Changes:
* renamed unlock()/unlock_stop() to unblock()/unblock_cancel() in gstvaapiwindow
* splitted the patch removing wl_display_dispatch_queue()

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=747492

https://bugzilla.gnome.org/show_bug.cgi?id=749078
2015-05-15 17:10:37 +02:00
Víctor Manuel Jáquez Leal
522ec79d2e wayland: wl_display_dispatch_queue() can block forever.
wl_display_dispatch_queue() might prevent the pipeline from shutting
down. This can happen e.g. if the wayland compositor exits while the
pipeline is running.

This patch replaces it with these steps:

- With wl_display_prepare_read() all threads announce their intention
  to read.
- wl_display_read_events() is thread save. On threads reads, the other
  wait for it to finish.
- With wl_display_dispatch_queue_pending() each thread dispatches its
  own events.

wl_display_dispatch_queue_pending() was defined since wayland 1.0.2

Original-patch-by: Michael Olbrich <m.olbrich@pengutronix.de>
* stripped out the unlock() unlock_stop() logic
* stripped out the poll handling

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=749078

https://bugzilla.gnome.org/show_bug.cgi?id=747492
2015-05-15 17:10:37 +02:00
Víctor Manuel Jáquez Leal
882387de30 wayland: rename frame for last_frame
Since frame in the private data means the last frame sent, it would
semantically better use last_frame.

Also, this patch makes use of g_atomic_pointer_{compare_and_exchange, set}()
functions.

https://bugzilla.gnome.org/show_bug.cgi?id=749078
2015-05-14 16:48:43 +02:00
Víctor Manuel Jáquez Leal
c80951ada1 wayland: use a counter as sync flag
Wayland window has a pointer to the last pushed frame and use it to set the
flag for stopping the queue dispatch loop. This may lead to memory leaks,
since we are not keeping track of all the queued frames structures.

This patch removes the last pushed frame pointer and change the binary flag
for an atomic counter, keeping track of number of queued frames and use it for
the queue dispatch loop.

https://bugzilla.gnome.org/show_bug.cgi?id=749078
2015-05-14 16:48:43 +02:00
Víctor Manuel Jáquez Leal
62c3888b76 wayland: decouple wl_buffer from frame
This patch takes out the wayland's buffer from the the frame structure. The
buffer is queued to wayland and destroyed in the "release" callback. The
frame is freed in the surface's "done" callback.

In this way a buffer may be leaked but not the whole frame structure.

- surface 'done' callback is used to throttle the rendering operation and to
  unallocate the frame, but not the buffer.
- buffer 'release' callback is used to destroy wl_buffer.

Original-patch-by: Zhao Halley <halley.zhao@intel.com>
* code rebase
* kept the the event_queue for buffer's proxy

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=749078
2015-05-14 16:48:43 +02:00
Víctor Manuel Jáquez Leal
ef7dc4eaf6 build: fix make distcheck
This patch fixes several issues found when running the `make distcheck`
target:

- In commit c561b8da, the update of gstcompat.h in Makefile.am was
  forgotten.
- In commit c5756a91 add the simple_encoder_source_h in EXTRA_DIST was
  forgotten.
- vpx.build.stamp is not generated at all, only vpx.configure.stamp.
- The make target distcleancheck failed because some autogenerated files
  were not handled with the DISTCLEANFILES variable.

Note: `make distcheck -jXX` is not currently supported.
2015-05-13 15:21:07 +02:00
Víctor Manuel Jáquez Leal
069edff757 libs: trivial documentation fix
GST_VAAPI_ENCODER_STATUS_NO_SURFACE and GST_VAAPI_ENCODER_STATUS_NO_BUFFER
are not errors, so they do not have the ERROR namespace.

This patch fixes this typo in documentation.
2015-05-06 09:54:26 +02:00
Simon Farnsworth
e60df073a0 window: Correct prototype to match implementation
On s390x, guintptr and GstVaapiID are not compatible types. The
implementation of gst_vaapi_window_new_internal() and all its callers
seem to assume that its third argument is a GstVaapiID, while the
header gives it guintptr type.

https://bugzilla.gnome.org/show_bug.cgi?id=744559
2015-05-04 18:07:46 +02:00
Víctor Manuel Jáquez Leal
81d6b42420 build: upgrade glib dependency to 2.32
Since bug #745728 was fixed the oldest supported version of GStreamer is
1.2. That GStreamer release requires glib 2.32, so we can upgrade our
requirement too.

This patch changes the required version of glib in configure.ac and removes
the hacks in glibcompat.h

https://bugzilla.gnome.org/show_bug.cgi?id=748698
2015-04-30 13:54:34 +02:00
Olivier Crete
4091e86ab6 wayland: don't leak the registry proxy
Release the registry proxy when closing the display.

https://bugzilla.gnome.org/show_bug.cgi?id=748564
2015-04-28 10:36:08 +02:00
Víctor Manuel Jáquez Leal
af8ea3701e wayland: refactor _sync() method and rename callback
This patch only intends to improve readability: in the method
gst_vaapi_window_wayland_sync() the if/do instructions are squashed into a
single while loop.

Also renames the frame_redraw_callback() callback into frame_done_callback(),
which is a bit more aligned to Wayland API.
2015-04-21 17:25:47 +02:00
Michael Olbrich
7548c72a7d wayland: free frame in buffer release callback
The Wayland compositor may still use the buffer when the frame done
callback is called.

This patch destroys the frame (which contains the buffer) until the
release callback is called. The draw termination callback only controls
the display queue dispatching.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>

https://bugzilla.gnome.org/show_bug.cgi?id=747492
2015-04-21 17:25:25 +02:00
Olivier Crete
11c963a3c1 vaapidecode: Tell the base class about released frames on close
The base class needs to be informed about frames that were still queued
in the decoder on release, otherwise they are leaked.

https://bugzilla.gnome.org/show_bug.cgi?id=747999
2015-04-20 12:50:09 +02:00
Gwenole Beauchesne
b3eccdb72b decoder: hevc: cosmetics.
Mostly coding style updates. Avoid integer signess inconsistencies.
Optimize dpb_find_lowest_poc() to align with original h264's decoder.
2015-04-17 10:43:47 +02:00
Sreerenj Balachandran
baec8e35f4 decoder: hevc: Add Support for tiled video decoding
Based up on the value of uniform_spacing_flag in Picture Parameter Set,
the tile column width and tile row height should be calculated.
Equations: 6-1, 6-2
Tiled video Descriptions: 7.3.2.3, 7.4.3.3
2015-04-16 14:13:59 +03:00
Sreerenj Balachandran
2ddfcd8bc3 decoder: hevc: Fix decoding when there are RASL pictures present.
-- Set NoRaslOutputFlag based on EOS and EOB Nal units
-- Fix PicOutputFlag setting for RASL picture
-- Fix prev_poc_lsb/prev_poc_msb calculation
-- Drop the RASL frames if NoRaslOutputFlag is TRUE for the associated IRAP picture
-- Fixed couple of crashes and added cosmetics
2015-04-16 14:13:21 +03:00
Martin Sherburn
b5425da1de display: drm: fix race condition setting device type
There is a race condition where g_drm_device_type can be left set to
DRM_DEVICE_RENDERNODES when it shouldn't.

If thread 1 comes in and falls into the last else statement setting up both
RENDERNODES and LEGACY types. And begins to process the first type (RENDERNODES),
it sets g_drm_device_type = RENDERNODES.

Now when thread 2 comes in and sees g_drm_device_type is RENDERNODES, it queues
up that type to be tried but then encounters the lock and has to wait until the
first thread finishes. Once the lock is acquired it will then proceed to ONLY try
RENDERNODES and fail it. But it doesn't try LEGACY. And from then on, all future
attempts will only try RENDERNODES.

So to avoid this situation I have simply moved the acquisition of the lock higher
up in the attached patch.

https://bugzilla.gnome.org/show_bug.cgi?id=747914
2015-04-16 13:03:20 +02:00
Olivier Crete
0adb36b658 videopool: Release lock while allocating new object
The video pool can be accessed with the display lock held, for example,
when releasing a buffer from inside vaapisink_render, but allocating
a new object can may also take the display lock. Which means a possible
deadlock.

https://bugzilla.gnome.org/show_bug.cgi?id=747944
2015-04-16 12:11:45 +02:00
Víctor Manuel Jáquez Leal
8bef2cbd49 HEVC: silence the compiler
Fixed a couple of clang complains.
2015-04-16 11:25:42 +02:00
Michael Olbrich
b8f8d50f41 wayland: destroy vpp buffer pool on resize
Otherwise the old buffers with the old size are used.

https://bugzilla.gnome.org/show_bug.cgi?id=747491
2015-04-14 11:39:58 +02:00
Víctor Manuel Jáquez Leal
3eb7986409 build: don't compile HEVC if not supported
HEVC decoding was added recently libva-1.5.

This patch avoids HEVC decoding support in libgstvaapi if it is not available
in the installed libva.

https://bugzilla.gnome.org/show_bug.cgi?id=747831
2015-04-14 11:36:13 +02:00
Sreerenj Balachandran
430174f5a7 HEVC: Add HEVC(h265) decoder to core libgstvaapi
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-04-13 15:41:45 +03:00
Sreerenj Balachandran
8c5f1b1c4b HEVC: Add codec utility methods to core libgstvaapi
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-04-13 14:53:46 +03:00
Sreerenj Balachandran
23bf2ff9e5 HEVC: gstvaapiprofile: Add profile definitions
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-04-13 14:52:53 +03:00
Víctor Manuel Jáquez Leal
38f8fea4bb guard buffer export API if not available
The support for buffer exports in VA-API was added in version 0.36. These
interfaces are for interop with EGL, OpenCL, etc.

GStreamer-VAAPI uses it for a dmabuf memory allocator. Though, gstreamer-vaapi
has to support VA-API versions ranging from 0.30.4, which doesn't support it.

This patch guards all the buffer exports handling (and dmabuf allocator) if
the detected VA-API version is below 0.36.

https://bugzilla.gnome.org/show_bug.cgi?id=746405
2015-04-13 13:22:50 +02:00
Víctor Manuel Jáquez Leal
93d0141cc2 libs: remove unused variables
clang reports these unused variables. Let's get rid of them.

This patch is a missing part of commit c82e5173

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 18:21:49 +02:00
Víctor Manuel Jáquez Leal
a6518f6888 decoder: mpeg4: remove an spurious comparison
The member size in GstMpeg4Packet is gsize which is unsigned, which cannot be
less than zero. Hence this pre-condition test is a no-op. This patch removes
that code.

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 16:20:55 +02:00
Víctor Manuel Jáquez Leal
7c71f057b4 encoder: h264: casts slice_param->slice_type
slice_type in slice_param is defined as (char *), but it is compared against a
signed integer. clang complains about this comparison.

This patch casts the variable.

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 16:20:55 +02:00
Víctor Manuel Jáquez Leal
b1bbc087c1 encoder: avoid GstVaapiCodedBuffer redefinition
The symbol GstVaapiCodedBuffer is already defined in
gst-libs/gst/vaapi/gstvaapicodedbuffer.h which is loaded, at the end, by
gstvaapiencoder_objects.h. Clang complains about the symbol re-definition.

This patch removes that redefinition.

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 16:20:55 +02:00
Víctor Manuel Jáquez Leal
c82e51738f libs: remove unused variables
clang reports these unused variables. Let's get rid of them.

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 16:20:55 +02:00
Víctor Manuel Jáquez Leal
d363000eaa encoder: mpeg2: use fabsf() instead of abs()
The member value in frame_rate_tab is float, the result of the abs() function
should be float too. But abs() only manages integers.

This patch replaces abs() with fabsf() to handle correctly the possible floats
values.

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 16:20:55 +02:00
Víctor Manuel Jáquez Leal
c9f0807752 decoder: cast GST_VAAPI_DECODER_STATUS_DROP_FRAME
Since GST_VAAPI_DECODER_STATUS_DROP_FRAME is not part of the enum
GstVaapiDecoderStatus, we need to cast it to avoid compiler complains.

https://bugzilla.gnome.org/show_bug.cgi?id=747312
2015-04-08 16:20:55 +02:00
Víctor Manuel Jáquez Leal
c561b8da8a update and move gstcompat.h
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.

Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.

This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h

https://bugzilla.gnome.org/show_bug.cgi?id=745728

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-04-03 17:08:30 +03:00
Víctor Manuel Jáquez Leal
f5d3c2d85d Remove libgstvaapi-videoutils.so
This library was intended to add the base classes for video decoders which
where not included in gstreamer-0.10.

Since the support of gstreamer-0.10 is deprecated those classes are not
required, thus the whole library is removed.

https://bugzilla.gnome.org/show_bug.cgi?id=745728
https://bugzilla.gnome.org/show_bug.cgi?id=732666

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-04-03 17:01:45 +03:00
Víctor Manuel Jáquez Leal
43d8366ec6 Remove HAVE_GST_VIDEO_OVERLAY_HWCAPS macro
This macro guarded the use of HAVE_GST_VIDEO_OVERLAY_HWCAPS, which was not
defined before gstreamer 0.10.35. Since the support of gstreamer-0.10 is
deprecated these guards are not required.

https://bugzilla.gnome.org/show_bug.cgi?id=745728
https://bugzilla.gnome.org/show_bug.cgi?id=732666

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-04-03 16:55:43 +03:00
Víctor Manuel Jáquez Leal
d256f1d283 Removal of gstreamer-0.10 support
This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-0.10.

https://bugzilla.gnome.org/show_bug.cgi?id=745728
https://bugzilla.gnome.org/show_bug.cgi?id=732666

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2015-04-03 16:55:27 +03:00
Julien Isorce
200b1baabc vaapidisplay: mark X11 display as compatible with EGL
GST_GL_WINDOW=x11 GST_GL_API=gles2 GST_GL_PLATFORM=egl
gst-launch-1.0 ... ! vaapidecode ! glimagesink

https://bugzilla.gnome.org/show_bug.cgi?id=745902

Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
2015-03-14 22:12:19 +02:00
Sreerenj Balachandran
3f28da7f5a encoder: h264: add support for more than 2 views
Add support for H.264 MVC Multiview High profile encoding with
more than 2 views. All views within the same accesss unit are
provided in increasing order of view order index (VOIdx).

Upto 10 view are supported for now.

A new property "view-ids" has been provided for the plugins to
set the view ids (which is an array of guint values) to be used
for mvc encoding.

https://bugzilla.gnome.org/show_bug.cgi?id=732453
2015-02-24 17:14:33 +02:00
Gwenole Beauchesne
6a465ae793 plugins: add support for GstVideoGLTextureOrientation.
Add support for GstVideoGLTextureOrientation modes. In particular,
add orientation flags to the GstVaapiTexture wrapper and the GLX
implementations. Default mode is that texture memory is laid out
with top lines first, left row first. Flags indicate whether the
X or Y axis need to be inverted.
2015-02-24 15:20:03 +01:00
Gwenole Beauchesne
aabb8c99c2 egl: add windowing support.
This provides for some basic EGL window abstraction.
2015-02-24 15:20:03 +01:00
Gwenole Beauchesne
23c489d8ee egl: add texture abstraction.
Add GstVaapiTextureEGL abstraction that can create its own GL texture,
or import a foreign allocated one, while still allowing updates from a
VA surface.
2015-02-24 15:20:03 +01:00
Gwenole Beauchesne
a9fe79610a egl: allow for EGLImage imports into VA Surfaces.
Add helpers to import EGLImage objects into VA surfaces. There are
two operational modes: (i) gst_vaapi_surface_new_from_egl_image(),
which allows for implicit conversion from EGLImage to a VA surface
in native video format, and (ii) gst_vaapi_surface_new_with_egl_image(),
which exactly wraps the source EGLImage, typically in RGBA format
with linear storage.

Note: in case of (i), the EGLImage can be disposed right after the
VA surface creation call, unlike in (ii) where the user shall ensure
that the EGLImage is live until the associated VA surface is no longer
needed.

https://bugzilla.gnome.org/show_bug.cgi?id=743847
2015-02-24 15:20:03 +01:00
Gwenole Beauchesne
1e7c4db5a7 Add initial support for EGL.
Add initial support for EGL to libgstvaapi core library. The target
display server and the desired OpenGL API can be programmatically
selected at run-time.

A comprehensive set of EGL utilities are provided to support those
dynamic selection needs, but also most importantly to ensure that
the GL command stream is executed from within a single thread.

https://bugzilla.gnome.org/show_bug.cgi?id=743846
2015-02-24 15:20:03 +01:00
Gwenole Beauchesne
91c5d948be libs: initialize GValues in a thread-safe manner. 2015-02-24 15:20:03 +01:00
Gwenole Beauchesne
11b02b05e5 libs: re-indent all GValue related source code. 2015-02-24 15:20:03 +01:00
Víctor Manuel Jáquez Leal
671b1ea305 Fix compiler warnings
This patch fixes some warnings that gcc 4.9 reports.

https://bugzilla.gnome.org/show_bug.cgi?id=744411
2015-02-18 11:46:11 +02:00
Víctor Manuel Jáquez Leal
481d6b1f25 VC1: decoder: Ignore VC1 user BDU's
Don't return error if the processed BDU is a user one, just ignore them.
https://bugzilla.gnome.org/show_bug.cgi?id=741237

Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-02-18 11:20:42 +02:00
Sreerenj Balachandran
eeefdb4958 Add VP8 Encoder to core libgstvaapi. 2015-02-13 13:42:04 +02:00
Lim Siew Hoon
6edb173486 decoder: vc1: Rounding control handling for VC1 simple and Main profile
Added rounding control handling for VC1 simple and Main profile
based on VC1 standard spec: section 8.3.7

https://bugzilla.gnome.org/show_bug.cgi?id=743958

Signed-off-by: Lim Siew Hoon <siew.hoon.lim@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
2015-02-10 11:40:16 +02:00
Sreerenj Balachandran
6b73746ab6 encoder: jpeg: Fix the sampling factor calculation for ENCODED format.
If the incoming raw video format is GST_VIDEO_FORMAT_ENCODED,
use native YUV420 format (which is i420) as default.
2015-02-05 13:08:53 +02:00
Sreerenj Balachandran
0f40843bb3 encoder: Only support YUV420 native format as input for now
Practically we should be able to support more formats, for eg:
JPEG Encoder can support YUV422, RGBA and all.
But this is causing more issues which need proper fix here and there.
2015-02-05 12:13:38 +02:00
Olivier Crete
fc7e6b19fd vaapidecode: Check the condition after taking the lock
Otherwise the condition could become true before the lock
is taken and the g_cond_signal() could be called
before the g_cond_wait(), so the g_cond_wait() is never
awoken.

https://bugzilla.gnome.org/show_bug.cgi?id=740645
2015-02-04 18:34:59 +02:00
Sreerenj Balachandran
4c7c858374 gstvaapicontext: Add VAConfigAttribValEncJPEG to the attribute list using for VAConfig creation. 2015-02-04 11:17:58 +02:00
Sreerenj Balachandran
7a84b06097 gstvaapicontext: Don't use the unsupported Ratecontrol attributes for vaCreateConfig
Don't add the VAConfigAttribRateControl to the attribute list using
for the vaCreateConfig if it is not supported by the driver.
2015-02-04 11:17:27 +02:00
Sreerenj Balachandran
beefadc7b7 gstvaapiencoder: Use hardcoded packed_raw_data flag for JPEG Encoding 2015-02-04 11:17:06 +02:00
Sreerenj Balachandran
3332c25ef6 gstvaapiencoder: Fix crash when handling rate control mask
Having a ratecontrol_mask equal to zero is not a bug, but the driver
might not be supporting any kind of rate control mechanisms.
Eg: JPEG Encoding
2015-02-04 11:16:37 +02:00
Sreerenj Balachandran
0609fad69c encoder: Add JPEG Encoder 2015-02-04 11:16:05 +02:00
Sreerenj Balachandran
f8020bb03e encoder_objects: Add QuantizationMatrix and JPEGHuffmanTable 2015-02-04 11:15:38 +02:00
Sreerenj Balachandran
d48ab9a3d6 Encode: Add support for Picture level Entrypoint
This is useful for JPEG encoding which is utilizing picture level
entrypoint instead of slice level entrypoint like h264,mpeg2 etc.
2015-02-04 11:15:00 +02:00
Gwenole Beauchesne
797632139f surface: add support for GEM buffer imports.
Add support for GEM buffer imports. This is useful for VA/EGL interop
with legacy Mesa implementations, or when it is desired or required to
support outbound textures for instance.

https://bugzilla.gnome.org/show_bug.cgi?id=736718
2015-01-28 17:35:16 +01:00
Gwenole Beauchesne
011f9bd6cb surface: add support for dma_buf imports.
Add new gst_vaapi_surface_new_with_dma_buf_handle() helper function
to allow for creating VA surfaces from a foreign DRM PRIME fd. The
resulting VA surface owns the supplied buffer handle.

https://bugzilla.gnome.org/show_bug.cgi?id=735362
2015-01-28 17:35:16 +01:00
Gwenole Beauchesne
dd37fc4999 surface: add initial support for foreign buffer imports.
Add gst_vaapi_surface_new_from_buffer_proxy() helper function to
create a VA surface from an external buffer provided throug the
new GstVaapiBufferProxy object.
2015-01-28 17:35:16 +01:00
Gwenole Beauchesne
f3c58d4ef4 surface: add support for GEM buffer exports.
Add support for GEM buffer exports. This will only work with VA drivers
based off libdrm, e.g. the Intel HD Graphics VA driver. This is needed
to support interop with EGL and the "Desktop" GL specification. Indeed,
the EXT_image_dma_buf_import extension is not going to be supported in
Desktop GL, due to the lack of support for GL_TEXTURE_EXTERNAL_OES targets
there.

This is useful for implementing VA/EGL interop with legacy Mesa stacks,
in Desktop OpenGL context.

https://bugzilla.gnome.org/show_bug.cgi?id=736717
2015-01-28 17:35:16 +01:00
Gwenole Beauchesne
073d6d59e1 surface: add support for dma_buf exports.
Use the new VA buffer export APIs to allow for a VA surface to be
exposed as a plain PRIME fd. This is in view to simplifying interop
with EGL or OpenCL for instance.

https://bugzilla.gnome.org/show_bug.cgi?id=735364
2015-01-28 17:35:16 +01:00
Gwenole Beauchesne
250260cc36 Add abstraction for exported VA buffers.
The VA buffer export APIs work for a particular lifetime starting from
vaAcquireBufferHandle() and ending with vaReleaseBufferHandle(). As such,
it could be much more convenient to support implicit releases by simply
having a refcount reaching zero.

https://bugzilla.gnome.org/show_bug.cgi?id=736721
2015-01-28 17:35:16 +01:00
Sreerenj Balachandran
7651c51324 Add missing header file to Makefile
Add gstvaapitexture_glx.h to Makefile.am
2015-01-28 18:25:09 +02:00
Gwenole Beauchesne
96ce1bc761 videopool: add optional flags for surface pool allocation.
Reword surface pool allocation helpers so that to allow for a simple
form, e.g. gst_vaapi_surface_pool_new(format, width, height); and a
somewhat more elaborated/flexible form with optional allocation flags
and precise GstVideoInfo specification.

This is an API/ABI change, and SONAME version needs to be bumped.
2015-01-27 18:11:45 +01:00
Gwenole Beauchesne
e4e43cd842 videopool: re-indent all GstVaapiVideoPool related source code. 2015-01-27 18:11:45 +01:00
Gwenole Beauchesne
f5af9d150e window: add toplevel display indirection for visualid and colormap.
Add GstVaapiDisplay::get_{visual_id,colormap}() helpers to help determine
the best suitable window visual id and colormap. This is an indirection in
view to supporting EGL and custom/generic replacements.
2015-01-27 18:11:45 +01:00
Gwenole Beauchesne
babae32432 window: add toplevel API to determine the colormap.
Add GstVaapiWindowClass::get_colormap() hook to help determine the
currently active colormap bound to the supplied window, or actually
create it if it does not already exist yet.
2015-01-27 18:11:45 +01:00
Gwenole Beauchesne
e9f437167f window: add toplevel API to determine a visual id.
Add GstVaapiWindowClass::get_visual_id() function hook to help find
the best suitable visual id for the supplied window. While doing so,
also simplify the process by which an X11 window is created with a
desired Visual, i.e. now use a visual id instead of a Visual object.
2015-01-27 18:11:45 +01:00
Gwenole Beauchesne
ff0a237458 window: add generic helper to create windows.
Add a new generic helper function gst_vaapi_window_new() to create
a window without having the caller to check for the display type
himself. i.e. internally, there is now a GstVaapiDisplayClass hook
to create windows, and the actual backend implementation fills it in.
Add new generic helper functions gst_vaapi_texture_new_wrapped()

This is a simplification in view to supporting EGL.
2015-01-27 18:11:45 +01:00
Gwenole Beauchesne
807c4e8248 display: add utility function to check for OpenGL rendering.
Add gst_vaapi_display_has_opengl() helper function to help determining
whether the display can support OpenGL context to be bound to it, i.e.
if the class is of type GST_VAAPI_DISPLAY_TYPE_GLX.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
7d5d3e8640 display: refine the meaning of display type.
Make gst_vaapi_display_get_display_type() return the actual VA display
type. Conversely, add a gst_vaapi_display_get_class_type() function to
return the type of the GstVaapiDisplay instance. The former is used to
identify the display server onto which the application is running, and
the latter to identify the original object class.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
17f21ac4db display: cosmetics (helper macros, new internal API names).
Add more helper macros to the top-level GstVaapiDisplay interfaces.
Rename a few others used internally for improved consistency.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
1843774c0b display: record native display object.
Record the underlying native display instance into the toplevel
GstVaapiDisplay object. This is useful for fast lookups to the
underlying native display, e.g. for creating an EGL display.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
2fb20e9906 display: use a recursive mutex for the display cache.
Use a recursive mutex for the display cache so that a 3rdparty display
object could be initialized during the initialization of the parent
display.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
93418ed5ee texture: add generic helper to create textures.
Add new generic helper functions gst_vaapi_texture_new_wrapped()
and gst_vaapi_texture_new() to create a texture without having
the caller to uselessly check for the display type himself. i.e.
internally, there is now a GstVaapiDisplayClass hook to create
textures, and the actual backend implementation fills it in.

This is a simplification in view to supporting EGL.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
2101685b7d texture: move to core libgstvaapi base library.
GstVaapiTexture is a generic abstraction that could be moved to the
core libgstvaapi library. While doing this, no extra dependency needs
to be added. This means that a GstVaapitextureClass is now available
for any specific code that needs to be added, e.g. creation of the
underlying GL texture objects, or backend dependent ways to upload
a surface to the texture object.

Generic OpenGL data types (GLuint, GLenum) are also replaced with a
plain guint.

https://bugzilla.gnome.org/show_bug.cgi?id=736715
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
1799b362a3 texture: drop support for VA/GLX interfaces.
The VA/GLX interfaces are obsolete. They used to exist for XvBA, and
ease of use, but they had other caveats to deal with. It's now better
to move on to legacy mode, whereby VA/GLX interop is two be provided
through (i) X11 Pixmap, and (ii) other modern means of buffer sharing.

https://bugzilla.gnome.org/show_bug.cgi?id=736711
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
0a108653f2 texture: add support for cropping rectangle during transfer.
The gst_vaapi_texture_put_surface() function is missing a crop_rect
argument that would be used during transfer for cropping the source
surface to the desired dimensions.

Note: from a user point-of-view, he should create the GstVaapiTexture
object with the cropped size. That's the default behaviour in software
decoding pipelines that we need to cope with.

This is an API/ABI change, and SONAME version needs to be bumped.

https://bugzilla.gnome.org/show_bug.cgi?id=736712
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
48fabae3ec texture: re-indent all GstVaapiTexture related source code. 2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
4ebfba0d49 surface: add more fine-grained allocation helper.
Add new gst_vaapi_surface_new_full() helper function that allocates
VA surface from a GstVideoInfo template in argument. Additional flags
may include ways to
- allocate linear storage (GST_VAAPI_SURFACE_ALLOC_FLAG_LINEAR_STORAGE) ;
- allocate with fixed strides (GST_VAPI_SURFACE_ALLOC_FLAG_FIXED_STRIDES) ;
- allocate with fixed offsets (GST_VAAPI_SURFACE_ALLOC_FLAG_FIXED_OFFSETS).
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
334dd704b6 surface: re-indent all GstVaapiSurface related source code. 2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
568a62ae1e surfaceproxy: add helper to create a wrapped surface object.
Add new gst_vaapi_surface_proxy_new() helper to wrap a surface into
a proxy. The main use case for that is to convey additional information
at the proxy level that would not be suitable to the plain surface.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
1810a41c68 surfaceproxy: re-indent all GstVaapiSurfaceProxy related source code. 2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
f270838515 libs: re-introduce a GST_VAAPI_ID_INVALID value.
Re-introduce a GST_VAAPI_ID_INVALID value that represents
a non-zero and invalid id. This is useful to have a value
that is still invalid for cases where zero could actually
be a valid value.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
fd775b4400 libs: expose GstVaapiMiniObject APIs to all backends.
Make it possible to have all libgstvaapi backends (libs) access to a
common GstVaapiMiniObject API and implementation. This is a minor step
towards full exposure when needed, but restrict it to libgstvaapi at
this time.
2015-01-27 18:11:44 +01:00
Gwenole Beauchesne
c2afdb4650 libs: re-indent all GstVaapiObject related source code.
Re-indent and provide additional minor cosmetical changes to the
GstVaapiMiniObject and GstVaapiObject source files.
2015-01-27 18:11:44 +01:00
Sreerenj Balachandran
cffe87df89 gstvaapiencoder: Fix the negotiation issue with _ENCODED format handling
Don't error out for the video format GST_VIDEO_FORMAT_ENCODED with in gstvaapiencoder,
since the vaaapi context creation (gstvaapicontext.c) can still use the
default chroma type which is YUV420.

https://bugzilla.gnome.org/show_bug.cgi?id=743567
https://bugzilla.gnome.org/show_bug.cgi?id=743035
2015-01-27 12:38:45 +02:00
Sreerenj Balachandran
8bf8f1104d encoder: h264: Fix the period between I/P frames
If the key-frame period is set as one, then ip_period shuld be zero

https://bugzilla.gnome.org/show_bug.cgi?id=734992
2014-11-27 12:11:03 +02:00
Sreerenj Balachandran
7e4e6fc019 encoder: h264: Provide intra_idr_period value for VAEncSequenceParameterBufferH264
https://bugzilla.gnome.org/show_bug.cgi?id=734993
2014-11-27 11:21:03 +02:00
Gwenole Beauchesne
88b481e530 encoder: h264: fix pixel-aspect-ratio in encoded stream.
Really report sample aspect ratio (SAR) as present, and make it match
what we have obtained from the user as pixel-aspect-ratio (PAR). i.e.
really make sure VUI parameter aspect_ratio_info_present_flag is set
to TRUE and that the indication from aspect_ratio_idc is Extended_SAR.

This is a leftover from git commit a12662f.

https://bugzilla.gnome.org/show_bug.cgi?id=740360
2014-11-27 11:13:20 +02:00
Gwenole Beauchesne
0508e13ddf decoder: mpeg4: fix uninitialized variables.
Fix gst_vaapi_decoder_mpeg4_parse() to initialize the packet type to
GST_MPEG4_USER_DATA so that a parse error would result in skipping
that packet. Also fix gst_vaapi_decoder_mpeg4_decode_codec_data() to
initialize status to GST_VAAPI_DECODER_STATUS_SUCCESS.
2014-11-25 11:46:12 +01:00
Gwenole Beauchesne
669e33418e encoder: h264: fix profile limits.
Fix ensure_profile_limits() to lower profile to the desired limits,
only if the latter are actually known and the profile needed to be
changed to fit.
2014-11-25 11:41:49 +01:00
Gwenole Beauchesne
d1b7dc21f8 vaapidecode: only expose supported profiles when needed.
JPEG and VP8 codecs do not really support the concept of "profile". So,
don't try to expose any set that wouldn't be supported by jpegparse, or
ivfparse for instance.

https://bugzilla.gnome.org/show_bug.cgi?id=739713
https://bugzilla.gnome.org/show_bug.cgi?id=739714
2014-11-14 15:26:07 +01:00
Gwenole Beauchesne
8f71f74c5d decoder: h264: add initial support for repeat-first-field (RFF) flag.
Use the SEI pic_timing() message to track and propagate down the repeat
first field (RFF) flag. This is only initial support as there is one
other condition that could induce the RFF flag, which is not handled
yet.
2014-11-14 10:11:41 +01:00
Gwenole Beauchesne
a4048a9d6b decoder: h264: fix picture ordering count type 0 with previous MMCO5.
Fix the decoding process for picture order count type 0 when the previous
picture had a memory_management_control_operation = 5. In particular, fix
the actual variable type for prev_pic_structure to hold the full bits of
the picture structure.

In practice, this used to work though, due to the underlying type used to
express a gboolean.
2014-11-14 10:11:41 +01:00
Gwenole Beauchesne
415d5df7ee decoder: h264: fix detection of top-field-first (TFF) flag.
Use the SEI pic_timing() message to track the pic_struct variable when
present, or infer it from the regular slice header flags field_pic_flag
and bottom_field_flag. This fixes temporal sequence ordering when the
output pictures are to be displayed.

https://bugzilla.gnome.org/show_bug.cgi?id=739291
2014-11-14 10:11:41 +01:00
Gwenole Beauchesne
3656659d1c filter: add initial support for high quality scaling.
Add support for video scaling options in VPP pipelines. Only the
DEFAULT mode is bound to exist. Others might be folded into that
mode.
2014-10-29 17:33:48 +01:00
Gwenole Beauchesne
c537648c5b filter: re-indent all GstVaapiFilter related source code. 2014-10-29 16:35:46 +01:00
Gwenole Beauchesne
541f721fab display: add support for DRM Render-Nodes.
Add support for DRM Render-Nodes. This is a new feature that appeared
in kernel 3.12 for experimentation purposes, but was later declared
stable enough in kernel 3.15 for getting enabled by default.

This allows headless usages without authentication at all, i.e. usages
through plain ssh connections is possible.
2014-09-24 13:49:32 +02:00
Gwenole Beauchesne
97d7f21575 surfaceproxy: fix copy to propagate view_id.
Fix gst_vaapi_surface_proxy_copy() to copy the view-id element, thus
fixing random frames skipped when vaapipostproc element is used in
passthrough mode. In that mode, GstMemory is copied, thus including
the underlying GstVaapiVideoMeta and associated GstVaapiSurfaceProxy.
2014-08-22 15:54:31 +02:00
Gwenole Beauchesne
7ac501d026 build: fix with --no-undefined linker flags.
https://bugzilla.gnome.org/show_bug.cgi?id=729352
2014-08-01 11:05:01 +02:00
Gwenole Beauchesne
b8040b35c1 window: make gst_vaapi_window_reconfigure() thread-safe.
Ensure the X11 implementation for GstVaapiWindow::get_geometry() is
thread-safe by default, so that upper layer users don't need to handle
that explicitly.
2014-07-25 17:36:12 +02:00
Holger Kaelberer
08dc3036f4 window: allow for updating size from current geometry.
Add gst_vaapi_window_reconfigure() interface to force an update of
the GstVaapiWindow "soft" size, based on the current geometry of the
underlying native window.

This can be useful for instance to synchronize the window size when
the user changed it.

Thanks to Fabrice Bellet for rebasing the patch.

[changed interface to gst_vaapi_window_reconfigure()]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-07-25 17:36:12 +02:00
Gwenole Beauchesne
3490212988 window: re-indent all GstVaapiWindow related source code. 2014-07-25 17:36:12 +02:00
Gwenole Beauchesne
7c2c4c7a97 display: add interface to retrieve the display name.
Add gst_vaapi_display_get_display_name() helper function to determine
the name associated with the underlying native display. Note that for
raw DRM backends, the display name is actually the device path.
2014-07-25 17:35:56 +02:00
Gwenole Beauchesne
39ab75becd display: fix comparison of X11 display names.
Make sure to not only compare display host names, but also the actual
display number. The screen number does not need to be checked at this
time.
2014-07-25 17:35:53 +02:00
Fabrice Bellet
00ca734ebf decoder: mpeg4: fix picture decoder return value for skipped frames.
The picture decoder should return GST_VAAPI_DECODER_STATUS_DROP_FRAME
when a frame should be skipped, so the stream processing is not stalled.

https://bugzilla.gnome.org/show_bug.cgi?id=733324
2014-07-21 10:17:00 +02:00
Jan Schmidt
22dc8c4251 decoder: mpeg2: respect any input PTS provided for a frame.
The timestamp generator in gstvaapidecoder_mpeg2.c always interpolated
frame timestamps within a GOP, even when it's been fed input PTS for
every frame.

That leads to incorrect output timestamps in some situations - for example
live playback where input timestamps have been scaled based on arrival time
from the network and don't exactly match the framerate.

https://bugzilla.gnome.org/show_bug.cgi?id=732719
2014-07-04 07:38:50 +02:00
Sreerenj Balachandran
99bf1b1f98 GstVaapiObject: make gst_vaapi_object_new() more robust.
Forbid GstVaapiObject to be created without an associated klass spec.
It is mandatory that the subclass implements an adequate .finalize()
hook, so it shall provide a valid GstVaapiObjectClass.

https://bugzilla.gnome.org/show_bug.cgi?id=722757

[made non-NULL klass argument to gst_vaapi_object_new() a requirement]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-07-03 23:50:11 +02:00
Sreerenj Balachandran
502952d080 GstVaapiObject: initialize the derived object data with init() hook.
Call the subclass .init() function in gst_vaapi_object_new(), if
needed. The default behaviour is to zero initialize the subclass
object data, then the .init() function can be used to initialize
fields to non-default values, e.g. VA object ids to VA_INVALID_ID.

Also fix the gst_vaapi_object_new() description, which was merely
copied from GstVaapiMiniObject.

https://bugzilla.gnome.org/show_bug.cgi?id=722757

[changed to always zero initialize the subclass]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-07-03 23:38:25 +02:00
Gwenole Beauchesne
b5f1bdd59a decoder: h264: detect incorrectly paired fields in frames.
When a DPB flush is required, e.g. at a natural and of stream or issued
explicitly through an IDR, try to detect any frame left in the DPB that
is interlaced but does not contain two decoded fields. In that case, mark
the picture as having a single field only.

This avoids a hang while decoding tv_cut.mkv.
2014-07-03 14:56:26 +02:00
Gwenole Beauchesne
a3e49d6d13 decoder: h264: simplify the DPB output process.
Simplify the dpb_output() function to exclusively rely on the frame store
buffer to output, since this is now always provided. Besides, also fix
cases where split fields would not be displayed.

This is a regression from f48b1e0.
2014-07-03 14:56:23 +02:00
Gwenole Beauchesne
cba9b97300 decoder: h264: fix memory leak in PPS.
Cope with latest changes from codecparsers/h264. It is now required
to explicitly clear the GstH264PPS structure as it could contain
additional allocations (slice_group_ids).
2014-07-01 17:18:08 +02:00
Gwenole Beauchesne
702de9ad2f decoder: propagate MVC metadata ("view-id", head of multiview set).
Add new GstVaapiSurfaceProxy flag FFB, which means "first frame in
bundle", and really expresses the first view component of a multi
view coded frame. e.g. in H.264 MVC, the surface proxy has flag FFB
set if VOIdx = 0.

Likewise, new API is exposed to retrieve the associated "view-id".
2014-06-30 19:13:25 +02:00
Gwenole Beauchesne
70a48e0962 decoder: propagate "one-field" flags.
Allow decoders to set the "one-field" attribute when the decoded frame
genuinely has a single field, or if the second field was mis-decoded but
we still want to display the first field.
2014-06-30 19:13:25 +02:00
Gwenole Beauchesne
f040f4f8b4 decoder: output decoded frames only once.
Make sure to output the decoded picture, and push the associated
GstVideoCodecFrame, only once. The frame fully represents what needs
to be output, included for interlaced streams. Otherwise, the base
GstVideoDecoder class would release the frame twice.

Anyway, the general process is to output decoded frames only when
they are complete. By complete, we mean a full frame was decoded or
both fields of a frame were decoded.
2014-06-30 19:13:25 +02:00
Gwenole Beauchesne
8bdef56cd4 decoder: h264: decode current picture earlier.
Slightly optimize decoding process by submitting the current VA surface
for decoding earlier to the hardware, and perform the reference picture
marking process and DPB update process afterwards.

This is a minor optimization to let the video decode engine kick in work
earlier, thus improving parallel resources utilization.
2014-06-30 19:13:25 +02:00
Gwenole Beauchesne
f48b1e0cd6 decoder: h264: fix output of second field when first field is not in DPB.
Fix decoding of interlaced streams where a first field (e.g. B-slice)
was immediately output and the current decoded field is to be paired
with that former frame, which is no longer in DPB.

https://bugzilla.gnome.org/show_bug.cgi?id=701340
2014-06-30 19:13:25 +02:00
Gwenole Beauchesne
a208a80c29 decoder: h264: slightly optimize the process to detect new pictures.
Optimize the process to detect new pictures or start of new access
units by checking if the previous NAL unit was the end of a picture,
or the end of the previous access unit.
2014-06-30 11:51:59 +02:00
Gwenole Beauchesne
8ed129b8bd decoder: h264: handle access unit ("au") optimization.
Optimize parsing when buffers are supplied with access unit alignment.
This helps determining faster when the end of an access unit is reached.
2014-06-30 11:51:57 +02:00
Gwenole Beauchesne
850d3d6a4d decoder: h264: fix tracking of DPB size changes.
Add support for MVC streams with multiple SPS and subset SPS headers
emitted regularly, e.g. at around every I-frame. Track the maximum
number of views in ensure_context() and really reset the DPB size to
the expected value, always. i.e. even if it decreased. dpb_reset()
only cares of ensuring the DPB allocation.
2014-06-28 07:41:00 +02:00
Gwenole Beauchesne
9169c520cb decoder: h264: fix the DPB compaction process.
Fix the compaction process when the DPB is cleared for a specific
view, i.e. fix the process of filling in the holes resulting from
removing frame buffers matching the current picture.
2014-06-27 20:44:24 +02:00
Sreerenj Balachandran
95d7f95971 encoder: h264: generate new SPS only when codec config changed.
It is not necessary to periodically send SPS or subset SPS headers.
This is up to the upper layer (e.g. transport layer) to decide on
if/how to periodically submit those. For now, only generate new SPS
or subset SPS headers when the codec config changed.

Note: the upper layer could readily determine the config headers
(SPS/PPS) through the gst_vaapi_encoder_h264_get_codec_data() function.

https://bugzilla.gnome.org/show_bug.cgi?id=732083

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-06-27 20:26:21 +02:00
Gwenole Beauchesne
0d971bce26 encoder: h264: track encoder config changes.
Track and report when encoder configuration changed. For now, this covers
resolution, profile/level and bitrate changes.
2014-06-27 20:26:18 +02:00
Gwenole Beauchesne
a12662fd3e encoder: h264: add pixel-aspect-ratio to VUI parameters.
Report sample aspect ratio (SAR) as present, and make it match what
we have obtained from the user as pixel-aspect-ratio (PAR). i.e. the
VUI parameter aspect_ratio_info_present_flag now defaults to TRUE.
2014-06-27 13:15:13 +02:00
Sreerenj Balachandran
a4bd8450f7 encoder: h264: fix number of anchor and non-anchor reference pictures.
Set the value of num_anchor_refs_l0, num_anchor_refs_l1, num_non_anchor_refs_l0,
and num_non_anchor_refs_l1 to zero since the inter-view prediction is not yet
supported.
2014-06-27 11:51:32 +02:00
Sreerenj Balachandran
8ebf60124a encoder: h264: fix timing_info_present_flag value in subset SPS.
When the seq_parameter_set_data() syntax structure is present in a subset
sequence parameter set and vui_parameters_present_flag is equal to 1, then
timing_info_present_flag shall be equal to 0 (H.7.4.2.1.1).
2014-06-27 11:48:40 +02:00
Sreerenj Balachandran
619a79943a encoder: h264: add cpbBrNalFactor values for MVC profiles. 2014-06-27 11:48:36 +02:00
Sreerenj Balachandran
173f32d8e5 encoder: h264: fix NAL unit types in packed headers.
Submit Prefix NAL headers (nal_unit_type = 14) before every packed
slice header (nal_unit_type = 1 or 5) only for the base view. In non
base views, a Coded Slice Extension NAL header (nal_unit_type = 20)
is required, with an appropriate nal_unit_header_mvc_extension() in
the NAL header bytes.

https://bugzilla.gnome.org/show_bug.cgi?id=732083
2014-06-26 11:08:32 +02:00
Sreerenj Balachandran
a7c27bb7d5 encoder: h264: add missing field in packed Subset SPS header.
Write the missing num_level_values_signalled_minus1 syntax element
into the packed header for subset sequence parameter set.

https://bugzilla.gnome.org/show_bug.cgi?id=732083
2014-06-26 11:00:47 +02:00
Gwenole Beauchesne
bea0d07042 decoder: h264: fix marking of non-reference picture into DPB.
Fix search for a picture in the DPB that has a lower POC value than
the current picture. The dpb_find_lowest_poc() function will return
a picture with the lowest POC in DPB and that is marked as "needed
for output", but an additional check against the actual POC value
of the current picture is needed.

This is a regression from 1c46990.

https://bugzilla.gnome.org/show_bug.cgi?id=732130
2014-06-25 22:38:35 +02:00
Gwenole Beauchesne
8db72147c7 decoder: h264: fix DPB clear when no decoding actually started.
Fix dpb_clear() to clear previous frame buffers only if they actually
exist to begin with. If the decoder bailed out early, e.g. when it
does not support a specific profile, that array of previous frames
might not be allocated beforehand.
2014-06-19 17:08:47 +02:00
Sreerenj Balachandran
cb9f98f0d5 decoder: h264: add support for NALU "alignment" optimization.
We can avoid scanning for start codes again if the bitstream is fed
in NALU chunks. Currently, we always scan for start codes, and keep
track of remaining bits in a GstAdapter, even if, in practice, we
are likely receiving one GstBuffer per NAL unit. i.e. h264parse with
"nal" alignment.

https://bugzilla.gnome.org/show_bug.cgi?id=723284

[use gst_adapter_available_fast() to determine the top buffer size]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-06-19 15:29:12 +02:00
Gwenole Beauchesne
95c781c34f decoder: h264: fix caps to report interlace-mode accordingly.
The `vaapipostproc' element could never determine if the H.264 stream
was interlaced, and thus always assumed it to be progressive. Fix the
H.264 decoder to report interlace-mode accordingly, thus allowing the
vaapipostproc element to automatically enable deinterlacing.
2014-06-19 15:13:04 +02:00
Sreerenj Balachandran
781abad2c7 encoder: h264: fix multiple slices support in packed headers mode.
Handle packedi slice headers and packed raw data on a per-slice basis,
which is necessary for multi slice encoding.
2014-06-17 16:05:11 +02:00
Sreerenj Balachandran
786b68ac21 encoder: add infrastructure for per-slice handling of packed headers.
The packed slice header and packed raw data need to be paired with
the submission of VAEncSliceHeaderParameterBuffer. So handle them
on a per-slice basis insted of a per-picture basis.

[removed useless initializer]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-06-17 16:03:33 +02:00
Gwenole Beauchesne
799d7b7d0e decoder: h264: cope with new gst_h264_quant_matrix_*() interfaces.
New gst_h264_quant_matrix_*_get_raster_from_zigzag() were renamed
from gst_h264_video_quant_matrix_*_get_raster_from_zigzag().
2014-06-13 11:36:56 +02:00
Gwenole Beauchesne
c65aec1aa6 decoder: h264: factor out DPB pruning for MVC.
Factor out the removal process of unused inter-view only reference
pictures from the DPB, prior to the possible insertion of the current
picture.

Ideally, the compiler could still opt for generating two loops. But
at least, the code is now clearer for maintenance.
2014-06-10 18:33:59 +02:00
Gwenole Beauchesne
63fde28dfd decoder: h264: clean-ups.
Fix GST_VAAPI_PICTURE_IS_{INTER_VIEW,ANCHOR}() definitions to use
the base GST_VAAPI_PICTURE_FLAG_IS_SET() macro.
2014-06-10 18:33:59 +02:00
Gwenole Beauchesne
428b038dba decoder: h264: improve pruning of unused MVC inter-view frames.
Improve process for the removal of pictures from DPB before possible
insertion of the current picture (C.4.4) for H.264 MVC inter-view only
reference components. In particular, handle cases where picture to be
inserted is not the last one of the access unit and if it was already
output and is no longer marked as used for reference, including for
decoding next view components within the same access unit.
2014-06-10 18:33:59 +02:00
Gwenole Beauchesne
42ab3e0669 decoder: h264: improve DPB bumping process for MVC.
While invoking the DPB bumping process in presence of many views,
it could be necessary to output previous pictures that are ready,
in a whole. i.e. emitting all view components from the very first
view order index zero to the very last one in its original access
unit; and not starting from the view order index of the picture
that caused the DPB bumping process to be invoked.

As a reminder, the maximum number of frames in DPB for MultiView
High profile with more than 2 views is not necessarily a multiple
of the number of views.

This fixes decoding of MVCNV-4.264.
2014-06-10 18:33:59 +02:00
Gwenole Beauchesne
e8fe78824b decoder: h264: fix inter-view references array growth.
Let the utility layer handle dynamic growth of the inter-view pictures
array. By definition, setting a new size to the array will effectively
grow the array, but would also fill in the newly created elements with
empty entries (NULL), thus also increasing the reported length, which
is not correct.
2014-06-06 17:58:50 +02:00
Gwenole Beauchesne
60af04901f decoder: h264: reduce ReferenceFrames entries to the essential set.
When decoding Multiview High profile streams with a large number of
views, it is not possible to make the VAPictureParameterBufferH264.
ReferenceFrames[] array hold the complete DPB, with all possibly
active pictures to be used for inter-view prediction in the current
access unit.

So reduce the scope of the ReferenceFrames[] array to only include
the set of reference pictures that are going to be used for decoding
the current picture. Basically, this is a union of all RefPicListX[]
array, for all slices constituting the decoded picture.
2014-06-06 17:34:02 +02:00
Gwenole Beauchesne
e670e36007 decoder: h264: fix MVC inter-view prediction process.
The inter-view reference components and inter-view only reference
components that are included in the reference picture lists shall
be considered as not being marked as "used for short-term reference"
or "used for long-term reference". This means that reference flags
should all be removed from VAPictureH264.flags.

This fixes decoding of MVCNV-2.264.
2014-06-04 19:10:44 +02:00
Gwenole Beauchesne
f36486a1e2 decoder: h264: fix detection of profile changes for MVC.
If the VA driver exposes ad-hoc H.264 MVC profiles, then we have to
be careful to detect profiles changes and not reset the underlying
VA context erroneously. In MVC situations, we could indeed get a
profile_idc change for every SPS that gets activated, alternatively
(base-view -> non-base view -> base-view, etc.).

An improved fix would be to characterize the exact profile to use
once and for all when SPS NAL units are parsed. This would also
allow for fallbacks to a base-view decoding only mode.
2014-06-04 19:08:18 +02:00
Gwenole Beauchesne
885ebf4c72 encoder: h264: drop extraneous definitions.
Re-use definitions from the codecparser headers instead of duplicating
them here again. That covers NALU definitions and slice types.
2014-06-03 14:30:39 +02:00
Sreerenj Balachandran
e1976df1a1 encoder: h264: remove unnecessary calcualtion of max_pic_order_cnt.
https://bugzilla.gnome.org/show_bug.cgi?id=727418
2014-06-03 13:53:46 +02:00
Sreerenj Balachandran
6df5c74081 encoder: h264: don't allow CABAC with Extended profile.
The H.264 specification does not support CABAC entropy coding for the
Extended profile.

https://bugzilla.gnome.org/show_bug.cgi?id=727418
2014-06-03 13:53:43 +02:00
Sreerenj Balachandran
dba440b164 encoder: h264: use packed headers mode for MVC encoding.
Exclusively use VA drivers that support raw packed headers for encoding.
i.e. simply submit packed headers Subset SPS and Prefix NAL units. This
provides for better compatibility accross the various VA drivers and HW
generations since no particular API is needed beyond what readily exists.
2014-06-02 18:25:13 +02:00
Sreerenj Balachandran
0de9fd6347 encoder: h264: add support for packed slice headers.
https://bugzilla.gnome.org/show_bug.cgi?id=722905
2014-06-02 18:25:13 +02:00
Sreerenj Balachandran
73355a680f encoder: h264: store subset sps to generate the codec-data
Store the SubsetSPS nal unit which we need for MVC specific
codec_data generation.
2014-06-02 18:25:13 +02:00
Sreerenj Balachandran
f0924ba0d1 encoder: h264: fix MVC pipeline hang while encoding with B-frames.
Since we are encoding each view independently from each other, we
need a higher number of pre-allocated surfaces to be used as the
reconstructed frames. For Stereo High profile encoding, this means
to effectively double the number of frames to be stored in the DPB.
2014-06-02 18:25:13 +02:00
Li Xiaowei
7bdf3fa177 encoder: h264: add initial support for H.264 Stereo High profile.
Add initial support for Subset SPS, Prefix NAL and Slice Extension NAL
for non-base-view streams encoding, and the usual SPS, PPS and Slice
NALs for base-view encoding.

The H.264 Stereo High profile encoding mode will be turned on when the
"num-views" parameter is set to 2. The source (raw) YUV frames will be
considered as Left/Right view, alternatively.

Each of the two views has its own frames reordering pool and reference
frames list management system. Inter-view references are not supported
yet, so the views are encoded independently from each other.

Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
[limited to Stereo High profile per the definition of MAX_NUM_VIEWS]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-06-02 18:25:13 +02:00
Li Xiaowei
5323570a35 encoder: h264: wrap pools for refs and frames reordering.
Create structures to maintain the reference frames list (RefPool) and
frames reordering (ReorderPool) logic.

This is a prerequisite for H.264 MVC support.

Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
2014-06-02 18:25:13 +02:00
Li Xiaowei
4beee390e5 encoder: h264: add provisional support for subset SPS headers.
Add provisions to write subset SPS headers to the bitstream in view
to supporting the H.264 MVC specification.

This assumes the libva "staging" branch is in use.

Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
2014-06-02 18:25:13 +02:00
Li Xiaowei
fb7ecb15e2 utils: add H.264 MVC profiles.
Add "MultiView High" and "Stereo High" definitions.

Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
[require VA-API >= 0.35.2 for MVC profiles]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-06-02 18:25:12 +02:00
Gwenole Beauchesne
800bfc1add utils: only enable VP8 profiles for newer VA-API versions.
VP8 decoding API appeared in VA-API >= 0.35.0. So, disable mappings
involving VP8 codec on earlier versions of the API.
2014-06-02 18:25:12 +02:00
Gwenole Beauchesne
f0d3d9cd3c decoder: h264: compute view ids only once per slice.
Optimize lookups of view ids / view order indices by caching the result
of the calculatiosn right into the GstVaapiParserInfoH264 struct. This
terribly simplifies is_new_access_unit() and find_first_field() functions.
2014-05-22 10:13:34 +02:00
Gwenole Beauchesne
abcc8bb7a2 decoder: h264: add support for MVC interlaced streams.
Fix support for MVC Stereo High profile streams with interlaced frames.
Also improve the detection logic of the first field.
2014-05-21 20:04:35 +02:00
Gwenole Beauchesne
5d76afb40d decoder: h264: add MVC profiles compatibility logic.
Add safe fallbacks for MVC profiles:
- all MultiView High profile streams with 2 views at most can be decoded
  with a Stereo High profile compliant decoder ;
- all Stereo High profile streams with only progressive views can be
  decoded with a MultiView High profile compliant decoder ;
- all drivers that support slice-level decoding could normally support
  MVC profiles when the DPB holds at most 16 frames.
2014-05-21 20:04:35 +02:00
Gwenole Beauchesne
8c5e89c298 decoder: h264: add initial support for MVC.
https://bugzilla.gnome.org/show_bug.cgi?id=721772
2014-05-21 20:04:34 +02:00
Gwenole Beauchesne
42b112f8bd decoder: h264: dynamically allocate the DPB.
Dynamically allocate the Decoded Picture Buffer (DPB) and add provisions
for supporting the MVC allocation requirements.
2014-05-21 19:59:52 +02:00
Gwenole Beauchesne
ae1d8267d9 decoder: h264: fix detection of access unit boundaries.
In order to have a stricter conforming implementation, we need to carefully
detect access unit boundaries. Additional operations could be necessary to
perform at those boundaries.
2014-05-21 19:59:52 +02:00
Sreerenj Balachandran
a6215a0757 decoder: h264: detect the first VCL NAL unit of a picture for MVC.
Detect the first VCL NAL unit of a picture for MVC, based on the
view_id as per H.7.4.1.2.4. Note that we only need to detect new
view components.

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-05-21 19:59:52 +02:00
Sreerenj Balachandran
e4166f5a91 decoder: h264: properly handle Prefix NAL units.
Always cache the previous NAL unit so that we could check whether
there is a Prefix NAL unit immediately preceding the current slice
or IDR NAL unit. In that case, the NAL unit metadata is copied into
the current NAL unit. Otherwise, some default values are inferred,
tentatively. e.g. view_id shall be set to 0 and inter_view_flag to 1.

[infer default values for slice if previous NAL was not a Prefix]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-05-21 19:59:52 +02:00
Xiaowei Li
79118904a0 decoder: h264: add support for MVC base views.
Allow decoding for base views of MVC encoded streams. For now, just skip
the slice extension and prefix NAL units, and skip non-base view frames.

Signed-off-by: Xiaowei Li <xiaowei.a.li@intel.com>
[fixed memory leak, improved check for MVC NAL units]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
2014-05-21 19:59:52 +02:00
Gwenole Beauchesne
1c46990ecd decoder: h264: simplify storage of decoded picture into DPB.
Factor out process by which the decoded picture with the lowest POC
is found, and possibly output. Likewise, the storage and marking of
a reference decoded, or non-reference decoded picture, into the DPB
could also be simplified as they mostly share the same operations.
2014-05-21 19:59:52 +02:00
Gwenole Beauchesne
a571350dee decoder: h264: minor clean-ups.
Make init_picture_ref_lists() more consistent with other functions
related to the reference marking process by supplying the current
picture as argument.
2014-05-21 19:59:52 +02:00
Gwenole Beauchesne
c0993182bd display: add utility function to query VA driver name.
Add gst_vaapi_display_get_vendor_string() helper function to query
the underlying VA driver name. The display object owns the resulting
string, so it shall not be deallocated.

That function is thread-safe. It could be used for debugging purposes,
for instance.
2014-05-21 19:59:52 +02:00
Gwenole Beauchesne
71053228b3 display: make cache maintenance really MT-safe.
Make sure to initialize one GstVaapiDisplay at a time, even in threaded
environments. This makes sure the display cache is also consistent
during the whole display creation process. In the former implementation,
there were risks that display cache got updated in another thread.
2014-05-21 19:59:52 +02:00