Otherwise check_events() will not remove the GAP event (as the queue
tail is not the event anymore but the GAP buffer), then the GAP buffer
is handled, then the GAP event is handled again, ... forever.
Avoids dereferencing dead objects
What happens in the autovideosink case is that context 1 is created and
destroyed before all the async operations hae executed on the associated
window. When the delayed operations execute, they then reference dead
objects and crash.
We fix this by keeping refs over all async operations so the object
cannot be deleted while async operations are in flight.
https://bugzilla.gnome.org/show_bug.cgi?id=782379
This is a workaround for a regression introduced by
f4190a49c0
( adaptivedemux: Check live seeking range more often )
The goal of the previous commit was to be able to cope with non-1.0
rates on live streams which have a "seeking window" (i.e. the server
keeps around quite a bit of the live stream so you can seek back into
it).
Without that commit, two different kind of issues would happen:
* When doing reverse playback, you would never check whether you
are outside of the seekable region. And would then continuously
try to download fragments that are no longer present.
* When doing fast forward, you would end up requesting fragments
which are not present yet.
In order to determine whether one was *really* outside of the seekable
window, we check whether the current stream position is still
within the seekable region.
The *problem* though with that commit is that it assumes that subclasses
will return continuously updated seeking ranges (i.e. dependent on the
current time), which is *NOT* the case.
For example:
* dashdemux does use the current UTC to determine the seekable region
* hlsdemux uses the values from the last updated manifest
Therefore if one downloads fragments faster than realtime, for HLS
we would end up at the end of the last manifest seekable range, and
the previous commit would consider the stream as being ended... which
is not the case.
In the long run, we need to figure out a way to cope with non-1.0
rates on live streams for all types of stream (including HLS).
https://bugzilla.gnome.org/show_bug.cgi?id=783075
This is a race that was exposed by the {hls|dash}.scrub_forward_seeking
validate test.
The "race" is that a subclass might want to change format, causing
a new stream to be created (but not exposed/switched yet) and put on the
prepared_streams list. That stream will have values (including pending
segment) from the pre-seek state.
Before the stream is exposed/switched, a new seek comes in and the stream
values get updated ... but the ones that will be changed don't get updated
causing them to push out wrong segments once they are exposed.
https://bugzilla.gnome.org/show_bug.cgi?id=773159
Add a function to install the default RGBA pad templates,
but don't make them required so that there can be
GstGLFilter sub-classes with different input/output
caps if they want. Remove the hard-coded RGBA restriction in
the set_caps_features call, as it will be taken care
of by intersecting with the pad templates.
Update all the sub-classes to match
Adaptive demuxers are special demuxers that runs their own sources
internally. In this patch we flag the demuxer as being a source in order
to receive the downstream events. We then handle the EOS event by
resetting the internal state and pushing EOS on all pads. This handling
is done asynchronously to avoid blocking user thread.
https://bugzilla.gnome.org/show_bug.cgi?id=723868
When the pad has received EOS, its buffer may still be mixed
any number of times, when the pad's framerate is inferior
to the output framerate.
This was introduced by my patch in
https://bugzilla.gnome.org/show_bug.cgi?id=782962, this patch
also correctly addresses the initial issue.
On the raspberry pi no pkg-config file is provided for the bcm_host
library. We are using AC_CHECK_LIB to detect this lib with autotools,
cc.find_library() library is a closer meson equivalent.
https://bugzilla.gnome.org/show_bug.cgi?id=784026
We have to pass the "height" as height = vmeta->offset[1] / width to the
API, which of course does not work well for formats with only a single
plane. Use the whole memory size instead of the offset in that case.
Previous commit let demux call gst_uri_downloader_cancel() on _demux_reset().
Note that, _demux_reset() called during PAUSED_TO_READY and READY_TO_PAUSED.
And, it will set "cancelled" on uridownloader which blocks the use of
uridownloader. The issue is that, subclass can use the uridownloader not only
live streaming for manifest update, but also for fetching another manifests
such as variant and rendition m3u8 of hls streaming. So to unblock it,
demux should clear "cancelled" before processing initial manifest.
https://bugzilla.gnome.org/show_bug.cgi?id=783401
before broadcasting preroll.
The deadlock was as follows:
-> The subclass pushes a buffer on a newly-created stream in T1
-> We take the preroll lock in T1, to handle_preroll
-> The demuxer is stopped in T2, we take the MANIFEST_LOCK
-> T1 starts blocking because it received a reconfigure event
and needs to take the MANIFEST_LOCK
-> T2 deadlocks because it now wants the preroll_lock.
https://bugzilla.gnome.org/show_bug.cgi?id=783255
Make sure the manifest update loop is stopped before proceeding with the
resetting of the manifest data. Otherwise, the updates loop will try to
use it and it leads to a segfault
https://bugzilla.gnome.org/show_bug.cgi?id=783028
As we release the MANIFEST_LOCK in stop_tasks,
demux->priv->old_streams can be set, we need to free these
otherwise we may end up trying to dispose elements in the
READY state.
https://bugzilla.gnome.org/show_bug.cgi?id=783256
When an accurate seek is requested on a live stream, only requests the
exact value for the "starting position" (i.e. start in forward playback
and stop in reverse playback).
https://bugzilla.gnome.org/show_bug.cgi?id=782698
And to make that 100% obvious, only use variables declared within the
switch cases instead of function-wide ones.
Also remove useless one-time-use-only variable.
CID #1409857
The live seeking range was only checked when doing actual seeks. This was
assuming that the rate would always be 1.0 (i.e. the playback would
advance in realtime, and therefore fragments would always be available
since the seeking window moves at the same rate).
With non-1.0 rates, this no longer becomes valid, and therefore we need
to check whether we are still within the live seeking range when advancing.
https://bugzilla.gnome.org/show_bug.cgi?id=783075
What we want is to retry downloading the fragment on 4xx/5xx errors
however returning EOS will cause waiting for a manifest update for live
(which may be a really long time) or stop everything for non-live.
Change that to only return EOS/ERROR once we've reached the error limit.
https://bugzilla.gnome.org/show_bug.cgi?id=776609
GL_RGB565 is sized internal glformat, the corresponding glformat
should be GL_RGB and type is GL_UNSIGNED_SHORT_565. Otherwise will
return GL_INVALID_ENUM when creating texture.
https://bugzilla.gnome.org/show_bug.cgi?id=783066
This ensures that they really get processed in order with
buffers. Just waiting for the queue to be empty is sometimes not
enough as the buffers are dropped from the pad before the result is
pushed to the next element, sometimes resulting in surprising
re-ordering.
In the case an aggregator is created and pads are requested but only
linked later, we end up never updating the upstream latency.
This was because latency queries on pads that are not linked succeed,
so we never did a new query once a live source has been linked, so the
thread was never started.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
When caps changes while streaming, the new caps was getting processed
immediately in videoaggregator, but the next buffer in the queue that
corresponds to this new caps was not necessarily being used immediately,
which resulted sometimes in using an old buffer with new caps. Of course
there used to be a separate buffer_vinfo for mapping the buffer with its
own caps, but in compositor the GstVideoConverter was still using wrong
info and resulted in invalid reads and corrupt output.
This approach here is more safe. We delay using the new caps
until we actually select the next buffer in the queue for use.
This way we also eliminate the need for buffer_vinfo, since the
pad->info is always in sync with the format of the selected buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=780682
The function needs to be unlocked if any data is received, but only
end the first buffer processing on an actual buffer, synchronized events
don't matter on the first buffer processing.
https://bugzilla.gnome.org/show_bug.cgi?id=781673
With the macOS/iOS implementations, the active thread can change
multiple times over the life of a pipeline which would expose a race in
the thread tracking.
Fix by taking a ref on the active thread while the context is active.
https://bugzilla.gnome.org/show_bug.cgi?id=779202
Otherwise fall back to glDrawBuffers. Also check if glReadBuffer exists
before using it.
glDrawBuffer does not exist for GLES, only glDrawBuffers does.
https://bugzilla.gnome.org/show_bug.cgi?id=782376
This commit fixes the following assumptions with live seeking:
1) start was always valid and of type GST_SEEK_TYPE_SET
2) direction was always forward
3) stop should be offsetted when handling non-accurate seeks before
the range start position.
In order to handle more live seeking use-cases (including reverse playback),
only do non-accurate start/stop value clamping for GST_SEEK_TYPE_SET values.
Also add a bit more debugging lines for issues
https://bugzilla.gnome.org/show_bug.cgi?id=782330
When dealing with live streams, we can't rely on GstSegment calculation
since it uses the segment duration to calculate the absolute values.
But since we are dealing with live *and* we know the ranges, we can
compute the absolute seeking values using the range stop (i.e. "now")
as the END position.
Allows seeking back to "live" by using start_type:GST_SEEK_TYPE_END
and start:0
https://bugzilla.gnome.org/show_bug.cgi?id=782228
The allowed live seek ranges returned by subclasses are "inclusive", that is
to say that the "range_stop" value they return is the highest acceptable position
one can seek to (i.e. "now").
Allow seeking to exactly that value
Rationale is to allow the manifest update task to continue running while
seeks are occurring. Otherwise, if the user reliably performs a seek
before the manifest is updated, then as the manifest task is reset on
seeks (and thus the time to wait between manifest updates), the manifest
would never be updated.
This fix makes the manifest update task free-running and continously
update even during seeks.
Some actions (Qos, reconfigure, ...) might take place before we finish pushing out flush_start.
One problem would be that:
1) The QOS handling in adaptivedemux takes the MANIFEST LOCK
That QOS event comes from basesink with its PREROLL_LOCK taken
2) FLUSH_START is sent from adaptivedemux with the MANIFEST_LOCK taken and the basesink flushing handler needs to take the PREROLL_LOCK
=> deadlock
https://bugzilla.gnome.org/show_bug.cgi?id=781320
meson's configure_file emits only a comment like /* #undef ... */
for values which are unset in the configuration_data. For
gstglconfig.h, this differs from the autotools build where the
preprocessor definitions are always either 0 or 1. So loop over a
list of variables to set to zero as default.
Also sync up the gstglconfig.h.meson file with the additional
macros defined by the autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=781043
Windows aren't always removed in time, and it turns out to be
very, very hard to remove a window in a way that's not racy and
not deadlocky. Since the window itself doesn't leak, freeing
the list on object destruction is enough.
https://bugzilla.gnome.org/show_bug.cgi?id=781018
At the moment that demux is waiting manifest update, the target sequence
of fragment was advanced already. So, checking stream_has_next_fragment()
means looking for the next fragment of target fragment.
This might cause unexpected buffering if each fragment has
large duration and manifest is listing only limited number of fragments.
https://bugzilla.gnome.org/show_bug.cgi?id=780494
The GstGLFramebufferClass struct is typedeffed in
gstgl_fwd.h, and having a duplicate elsewhere is
breaking the cerbero build on my OSX machine,
even though it seems to be working in CI.
When entering this code path, we know that:
We received EOS on this pad.
We consumed all its buffers.
In any case, we want to replace vaggpad->buffer with NULL,
otherwise we will end up mixing the same buffer twice.
https://bugzilla.gnome.org/show_bug.cgi?id=781037
If set, the parent is used to proxy need-context messages from
uridownloader's http source in order to get cookies/headers
from the pipeline.
Based on a patch from Philippe Normand
https://bugzilla.gnome.org/show_bug.cgi?id=726314
When there are new pads pending for a bitrate switch, don't allow
EOS through from the old streams. It will be sent when the new pads are
ready, just before the old streams are removed.
This fixes racy bitrate switching with hlsdemux in urisourcebin
where old pads EOS before new pads appear and the entire pipeline can
EOS if those propagate fast enough
libgstgl has a dependency on libgstallocators starting with:
ed1e4c1 glupload: Add support for Vivante DirectTexture uploads
The dependency wasn't stated in the Makefile, so the build could
occasionally fail if you got unlucky with the ordering of build
steps.
https://bugzilla.gnome.org/show_bug.cgi?id=780330
In commit
> 956c4d0 gl/format: use our own GL format enum's instead of gstvideo's
the name and return type of gst_gl_format_from_video_info changed,
but some returns of the old type were missed. Here they are
updated to the correct type.
https://bugzilla.gnome.org/show_bug.cgi?id=780064
gst_player_set_uri_internal shouldn't free suburi which maybe set
by user to load external subtitle before start play. It just need
reset playbin's subutri property to NULL no matter if there was a
previous one or not.
https://bugzilla.gnome.org/show_bug.cgi?id=779453
All code interacting with Objective-C objects should now use Automated
Reference Counting rather than manual memory management or Garbage
Collection. Because ARC prohibits C-structs from containing
references to Objective-C objects, all such fields are now typed
'gpointer'. Setting and gettings Objective-C fields on such a
struct now uses explicit __bridge_* calls to tell ARC about
object lifetimes.
https://bugzilla.gnome.org/show_bug.cgi?id=777847
For duration queries on live streams, adaptivedemux ignores the query.
The problem then is that the query is answered by the downstream
qtdemux element, with the duration of the currently passing fragment.
This commit changes the behaviour of adaptivedemux to answer the duration
queries for live streams, returning GST_CLOCK_TIME_NONE.
https://bugzilla.gnome.org/show_bug.cgi?id=753879
If we need to send EOS on a pad that hasn't prerolled, generate
an error on the bus instead, otherwise the app will have no idea.
Fixes the HLS testFragmentNotFound test, which is waiting
for either EOS or an error.
To ensure that pads have caps when they are exposed, do
the exposing when all pending streams have prerolled an
output buffer, and only then EOS and remove any old pads.
Improves the switching sequence by making caps available
as soon as a pad appears.
With fixes from Seungha Yang <sh.yang@lge.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758257
send_event() of parent class (i.e., GstBinClass) iterates srcpads
to send SEEK event. And performing it per srcpad is inefficient.
So, let's drop duplicated SEEK event by checking seqnum
https://bugzilla.gnome.org/show_bug.cgi?id=776612
- Add overlay video renderer "video-sink" property, so that can be set
- In create_video_sink, it returns video sink instead of always NULL
- Add new renderer_new_with_sink() API to set video sink
https://bugzilla.gnome.org/show_bug.cgi?id=776490
'extern inline' was added in 2fb76c89 for MSVC (it was just
'inline' before), but all of this doesn't really make sense,
the functions are not going to be inlined anyway, and what
'extern inline' means exactly also appears to depend on the
Cxx standard targetted. Let's just remove the 'extern inline'
entirely. At least gcc6 still emits the exact same code as
before anyway. Fixes compilation/linking with gcc 4.8 as
used on L4T on the TK1.
The reason we previously used queue2 was to calculate the download rate,
but that wasn't entirely correct and we therefore calculate it before
queue2. We therefore now just need a simple queue.
../../../../gst-libs/gst/gl/gl.h:57:45: fatal error: gst/gl/gstglcontrolbindingproxy.h: No such file or directory
#include <gst/gl/gstglcontrolbindingproxy.h>
^
No-one's using/depending on it (it would have criticalled and not worked)
and it's causing more problems than it's solving. Store the GMainContext
in the public struct instead for subclasses to optionally use instead of
relying on the push/pop state to be correct.
https://bugzilla.gnome.org/show_bug.cgi?id=775970
This is potentially racy (in the unlikely scenario that we get two
first-time calls to gst_player_error_quark() at the same time). This
should not impact anything in terms of performance since it's only on
the error path.
The call itself could just be inlined by making GST_PLAYER_ERROR be
defined to the g_quark_from_static_string() call, but this feels ugly
from an API perspective.
If a sub class of GstGLContext does not create a group
then it currently crashes:
0 g_atomic_int_get (&share->refcount)
1 _context_share_group_is_shared (context->priv->sharegroup)
2 gst_gl_context_is_shared
3 _default_set_sync_gl
https://bugzilla.gnome.org/show_bug.cgi?id=774518
This is a subblass of VideoFilter but yet does not use any of it's
features. This also fixes issue in case the incoming images have custom
strides as the VideoMeta is no longer ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=775288
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=755036
Calling g_main_context_push_thread and then g_main_context_invoke()
(used by gst_gl_window_send_message_async()) in the same thread will
cause the invoked function to run immediately instead of being delayed.
This had implications for the creation of the OpenGL context not waiting
until the main loop had completely started up and as a result would
sometimes deadlock in short create/destroy scenarios.
https://bugzilla.gnome.org/show_bug.cgi?id=775171
626bcccff9 removed some locks that
allowed the main loop quit to occur before the context was fully
created.
2776cef25d attempted to readd them but
missed the scop of the quit() call.
Also remove the use of g_thread_join() as that's not safe to use when
it's possible to lose the last reference from the GL thread.
https://bugzilla.gnome.org/show_bug.cgi?id=775171
The smallest section ever needs to be at least 3 bytes (i.e. just the short
header).
Non-short headers need to be at least 11 bytes long (3 for the minimum header,
5 for the non-short header, and 4 for the CRC).
https://bugzilla.gnome.org/show_bug.cgi?id=775048
It's been removed and thus compiling anything against GstGLMemoryEGL
would error with:
In file included from gstomxvideodec.c:41:0:
usr/include/gstreamer-1.0/gst/gl/egl/gstglmemoryegl.h:32:41: fatal error: gst/gl/egl/gstglcontext_egl.h: No such file or directory
#include <gst/gl/egl/gstglcontext_egl.h>
^
https://bugzilla.gnome.org/show_bug.cgi?id=774886
Otherwise, when the application reuses the same UIView, we were getting
draw notifications on the previous view/layer's which weren't valid anymore
and were referencing pointers that had been freed.
https://bugzilla.gnome.org/show_bug.cgi?id=753003
This changes the failure case to require a consecutive number of
failures rather than being spread out over the entire stream.
Fixes the case where fetching the manifest was intermittent.
https://bugzilla.gnome.org/show_bug.cgi?id=774177
