Only in LTC mode we introduce additional latency that is depending on only on a
property and not on the framerate, so waiting for the framerate is not necessary.
In all other modes no latency is introduced at all and the latency query can
simply be proxied.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7831>
There is no point in having an endian marker on 8 bit bayer format names since
it is just one byte. Thus remove it.
This also fixes an incompatibility with plugins bad where there is no endian
marker on 8 bit bayer format names as well.
Fixes: #3729
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7826>
The `reuse` property end up setting the SO_REUSEADDR socket option for
the UDP socket. This setting have surprising effects.
On Linux systems the man page (`socket(7)`) states:
```
SO_REUSEADDR
Indicates that the rules used in validating addresses supplied
in a bind(2) call should allow reuse of local addresses. For
AF_INET sockets this means that a socket may bind, except when
there is an active listening socket bound to the address.
```
But since UDP does not listen this ends up meaning that when an
ephemeral port is allocated (setting the `port` to `0`) the kernel is
free to reuse any other UDP port that has `SO_REUSEADDR` set.
Tests checking the likelyhood of port conflict when using multiple
`udpsrc` shows port conflicts starting to occur after ~100-300 udpsrc
with port allocation enabled. See issue #3411 for more details.
Changing the default value of a property is not a small thing we risk
breaking application that rely on the current default value. But since
the effects of having `reuse` default `TRUE` on can also have damaging
and hard-to-debug consequences, it might be worth to consider.
Having `SO_REUSEADDR` enabled for multicast, might have some use cases
but for unicast, with dynamic port allocation, it does not make sense.
When not using an multicast address we will disable port reuse if the
`port` property is set to 0 (=allocate) and warn the user that we did
so.
Closes#3411
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7841>
Combine the appsrc and appsink settings into one place and ensure that
the appsrc will output a TIME segment, to avoid incorrect segment format
criticals in some situations.
The D3D11 path was already setting the segment format correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7839>
The gst_dep.get_variable('libexecdir') may fail in some scenarios
(e.g. building a module alone inside an uninstalled devenv) and
it shouldn't really be reached in the first place if docs are
disabled via options.
Also to avoid confusing meson messages when cross-compiling or
doing a static build.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7818>
This commit adds a Find Module implementing the necessary logic to link
against GStreamer, while implementing some extra bits to enhance the
compatibility.
The first addition is the `mobile` target, which implements the
monolithic `gstreamer_android` library, and which here gains
compatibility with Apple's operating systems.
The second addition is the handling of the basic GStreamer libraries as
`--whole-archive` when statically linked, which was ported from the
ndk-build project in Cerbero. This is not easy to do, as CMake suffers
from several issues that impede its proper usage of pkg-config:
- It cannot differentiate between system/compiler specific libraries
e.g. `-lm`, `-ldl`, but especially `-framework Cocoa`.
- It does not support `--whole-archive` natively until 3.27
- It attempts to reorder flags blindly by separating them with spaces,
thus requiring the use of `-Wl,` wrapping or (in the case of Apple
frameworks) manual framework lookup
The third addition is the port of the Fontconfig and ca-certificates
bundling logic.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6881>
The calculated position was off. I'm not sure of the exact cause;
possibly because we're in AU-aligned byte-stream mode, which means
`transform` is true.
Replacing the math that calculates the NALU positions with code more
similar to what is already in use for `idr_pos` seems to have fixed it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7318>
We do not own any ref to queries when running them.
If we end up processing the query from the streaming thread, it means that it was
a serialized query, and the query is being waited to be processed on the sinkpad
streaming thread, thread which owns the reference.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7767>
Add missing pixel format constants, and mappings for
P010, packed variants of 420 and RGBA layouts to GStreamer
buffer formats. This fixes problems with android decoders
refusing to output raw video frames with decoders that
announce support for these common pixel formats and
only allowing the 'hardware surfaces output' path.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7743>
Previously the wrapping of the 24-bit reference time was not handled
correctly when transforming it into GstClockTime. Given the unit of 64ms
the span that could be represented by 24 bits is 12 days and depending
on the start value we could get a wrapping problem anytime within this
time frame. This turned out to be particularly problematic for the GCC
algorithm in gst-plugins-rs which tried to evict old packages based on
the "oldest" timestamp, which due to wrapping problems could be in the
future. Thus, the container managing the packets could grow without
limits for a long time thereby creating both CPU and memory problems.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7527>
Don't assume that video/x-raw caps means buffers are mappable
or can be processed by videoconvert and friends. Only plug
those converters for real system memory, and treat other
memory capsfeatures as hardware surfaces
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7741>
Some file format standards don't require mastering-display-info
and content-light-level values to be provided.
Decklink however requires the static HDR metdata for the PQ transfer
function which we may not have.
CTA-861-G mentions that in this case, 0 may provided as an 'unknown'
value which is what we use here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7742>
* Consistently name parse functions according to their message type and
deprecate the misnamed ones,
* Add missing parse functions,
* Check for the correct message type when parsing
* Use correct field name for warning message details
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7754>
If a stream has an 'irregular' frame rate (e.g. metadata) RTCP SR
may be generated way too early, before the RTPSource has received
the first packet after Latency was configured in the pipeline.
We skip such RTPSources in the RTCP generation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7740>
This is documented as:
> you can query how many buffers are queued by reading the
> #gstqueue:current-level-buffers property. you can track changes
> by connecting to the notify::current-level-buffers signal (which
> like all signals will be emitted from the streaming thread). the same
> applies to the #gstqueue:current-level-time and
> #gstqueue:current-level-bytes properties.
... but was not implemented.
This also respects the `notify::silent` property for the notify signals
to be less intrusive.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7486>
Instead of registering the whole list of formats associated to a chroma, our
experience with GstVA tells that entry points only handles one color format per
supported chroma, and they are reflected in the static table.
This avoids exposing unsupported color formats for negotiation.
Fixes: #3914
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7708>
There is the possibility than an element/code/helper creates an identical
`GstStream` (same type and stream-id) instance instead of re-using a previous
one.
For those cases, when detecting whether a `GstStream` is already present in a
collection, we need to do more checks than just comparing the pointer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7716>
If we can't get the current caps when receiving a stream-start, that's fine,
they can/will be provided by other means at a later time.
What we definitely should not do is provide the starting caps of the chain,
which are potentially completely different from the end ones (like for example
`application/x-rtp`)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7716>
If an encoder supports multiple codecs (a bin wrapping/auto-plugging encoders)
then its src pad template caps might list the supported codecs. Without this
patch the selected parser would be the one corresponding to the first codec,
leading to caps negotiation error later on. The proposed fix is to check the
media type on the parser candidates sink pad templates according to the
requested encoded format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7670>
The diff between compared timestamps might be outside the gint range
resulting in wrong sorting results. This patch corrects that by
comparing the timestamps and then returning -1, 0 or 1 depending on the
result.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7726>
The wraparound handling code assumes that the PCR gets updated regularly for
being able to detect wraparounds. With ignore-pcr=true that was not the case and
it stayed initialized at 1h forever.
To avoid this problem, update the fake PCR whenever the PTS advanced by more
than 5s, and also detect wraparounds in these fake PCRs.
Problem can be reproduced with
$ gst-launch-1.0 videotestsrc pattern=black ! video/x-raw,framerate=1/5 ! \
x264enc speed-preset=ultrafast tune=zerolatency ! mpegtsmux ! \
tsdemux ignore-pcr=true ! fakesink
which restarts timestamps at 0 after around 26h30m.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7588>
Some servers (e.g. Axis cameras) expect the client to propose the encryption
key(s) to be used for SRTP / SRTCP. This is required to allow re-keying so
as to evade cryptanalysis. Note that the behaviour is not specified by the
RFCs. By setting the 'client-managed-mikey-mode' property to 'true', rtspsrc
acts as follows:
* For a secured profile (RTP/SAVP or RTP/SAVPF), any media in the SDP
returned by the server for which a MIKEY key management applies is
elligible for client managed mode. The MIKEY from the server is then
ignored.
* rtspsrc sends a SETUP with a MIKEY payload proposed by the user. The
payload is formed by calling the 'request-rtp-key' signal for each
elligible stream. During initialisation, 'request-rtcp-key' is also
called as usual. The keys returned by both signals should be the same
for a single stream, but the mechanism allows a different approach.
* The user can start re-keying of a stream by calling SET_PARAMETER.
The convenience signal 'set-mikey-parameter' can be used to build a
'KeyMgmt' parameter with a MIKEY payload.
* After the server accepts the new parameter, the user can call
'remove-key' and prepare for the new key(s) to be served by signals
'request-rtp-key' & 'request-rtcp-key'.
* The signals 'soft-limit' & 'hard-limit' are called when a key
reaches the limits of its utilisation.
This commit adds support for:
* client-managed MIKEY mode to srtpsrc.
* Master Key Index (MKI) parsing and encoding to GstMIKEYMessage.
* re-keying using the signals 'set-mikey-parameter' & 'remove-key' and
then by serving the new key via 'request-rtp-key' & 'request-rtcp-key'.
* 'soft-limit' & 'hard-limit' signals, similar to those provided by srtpdec.
See also:
* https://www.rfc-editor.org/rfc/rfc3830
* https://www.rfc-editor.org/rfc/rfc4567
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7587>
When force-live is TRUE, aggregator will correctly change its state with
NO_PREROLL, but unless something upstream is live did not previously set
live to TRUE on the latency query.
Fix this by or'ing force_live into the result.
Also improve debug
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7718>
Clients that already gotten a signal for synced clock, may rely on
getting the same when marked as corrupted to take appropriate action. So
send clock signal indicating no sync at identified corrupted state.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7664>
This allows the stream to drive the buffers submitted to the display server.
If the application does not receive frame events for a period of time due to
minimization or tty switch for example, instead of waiting to process and
then catching up when frame events resume, the stream will resume instantly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7691>
There is no requirement for a base DRM format to be supported by libgstvideo
in order to be uploaded to. Don't limite to DRM fourcc that have a libgstvideo
format mapping. This notably enabled AFBC support, which uses an opaque based
format that does not have a linear definition. This also adds R8/RG88 and
simimlar other formats that are not yet mapped in libgstvideo.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7689>
When the stream resolution change it is needed to negotiate
a new pools and to update the caps.
Resolution change could occurs on a new sequence or a new
picture so move resolution change detection code in a common
function.
For memory allocation reasons, only allows resolution change
on non keyframe if the driver support remove buffer feature.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7684>
We must drain the pending output picture so that subclass can renegotiate
the caps. Not doing so while still renegotiating would mean that the
subclass would have to do an allocation query before pushing the caps.
Pushing the caps now without this would also not work since these caps
won't match the pending buffers format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7684>
Add helpers function to call VIDIOC_REMOVE_BUFS ioctl.
If the driver support this feature buffers are removed from the queue when:
- the pool when is detached from the decoded.
- the pool is released.
- allocation failed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7684>
Use VIDIOC_CREATE_BUFS ioctl to create buffers instead of VIDIOC_REQBUFS
because it allows to create buffers also while streaming.
To prepare the introduction of VIDIOC_REMOVE_BUFFERS create
the buffers one per one instead of a range of them. This way
it can, in the futur, fill the holes.
gst_v4l2_decoder_request_buffers() is stil used to remove all
the buffers of the queue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7684>
When a datachannel within a session is removed after proper close,
reference to the error_ignore_bin elements of the datachannel
appsrc/appsink were left in webrtcbin.
This caused the bin-objects to be left and not freed until the whole
webrtc session was terminated. Among other things that includes a thread
from the appsrc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7675>
We want to ensure the stream-collection is present on the pad (as a sticky
event) before we expose the pad.
This is more reliable since it will ensure it is present before any other event
is pushed through.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7609>
- Add mtd_meta_clear to allow specific analytics-meta to handle their clear
operation specific to their type.
- Clear mtd's attached when analytic-meta is freed. When the buffer where
analytics-meta is attached is not from a buffer pool
gst_analytics_relation_meta_clear will not be called unless we explicitly call
it in _free. This important otherwise _mtd_clear are not called and lead to
leak if embedded mtd's allocated memory
- Un-ref in transform if it's a copy
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6026>
FLUSH_STOP is meant to clear the flushing state of pads and elements
downstream, not to process data. Hence, a FLUSH_STOP should not
propagate sticky events. This is also consistent with how flushes are a
special case for probes.
Currently this is almost always the case, since a FLUSH_STOP is
__usually__ preceded by a FLUSH_START, and events (sticky or not) are
discarded while a pad has the FLUSHING flag active (set by FLUSH_START).
However, it is currently assumed that a FLUSH_STOP not preceded by a
FLUSH_START is correct behavior, and this will occur while autoplugging
pipelines are constructed. This leaves us with an unhandled edge case!
This patch explicitly disables sending sticky events when pushing a
FLUSH_STOP, instead of relying on the flushing flag of the pad, which
will break in the edge case of a FLUSH_STOP not preceded by a
FLUSH_START.
If sticky events are propagated in response to a FLUSH_STOP, the
flushing thread can end up deadlocked in blocking code of a downstream
pad, such as a blocking probe. Instead, those events should be
propagated from the streaming thread of the pad when handling a
non-flushing synchronized event or buffer.
This fixes a deadlock found in WebKit with playbin3 when seeks occur
before preroll, where the seeking thread ended up stuck in the blocking
probe of playsink:
https://github.com/WebPlatformForEmbedded/WPEWebKit/issues/1367
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7632>
H.266 NAL unit header syntax [1] is similar to H.265 NAL unit header syntax[2]:
```
H.265 H.266
+---------------+---------------+ +---------------+---------------+
|0|1|2|3|4|5|6|7|0|1|2|3|4|5|6|7| |0|1|2|3|4|5|6|7|0|1|2|3|4|5|6|7|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|F| NALType | LayerId | TID | |F|U| LayerId | NALType | TID |
+-------------+-----------+-----+ +-------------+-----------------+
Where
* F: `forbidden_zero_bit`: f(1)
* U: `nuh_reserved_zero_bit`: u(1) only H.266
* LayerId: `nuh_layer_id`: u(6)
* NALType: `nal_unit_type`: u(6) in H.265 and u(5) in H.266
* TID: `nuh_temporal_id_plus1`: u(3)
```
NAL unit types have different values:
| NALType | H.265 | H.266 |
|----------|------------------------------------|---------------------------|
| VPS | HEVC_NAL_VPS(32) | VVC_VPS_NUT(14) |
| SPS | HEVC_NAL_SPS(33) | VVC_SPS_NUT(15) |
| PPS | HEVC_NAL_PPS(34) | VVC_PPS_NUT(16) |
| IRAP | BLA_W_LP(19)..HEVC_NAL_CRA_NUT(21) | IDR_W_RADL(7)..CRA_NUT(9) |
Implementation of `h266_video_type_find` is based on `h265_video_type_find` with
next differences:
- NAL unit header syntax for H.265 and H.266
- Diff NAL unit types values
- Avoid checking nuh_layer_id is zero. H.266 conformance test suite[3] contains examples with more than one layer.
This typefind was tested with H.266 conformance test suite [3]. Also, with the help of fluster[4],
with H.264 and H.265 conformance test suites to avoid regresions. Pending test vectors to fix:
- 8b422_H_Sony_4
- DEBLOCKING_E_Ericsson_3
[1] https://www.itu.int/rec/T-REC-H.266
[2] https://www.itu.int/rec/T-REC-H.265
[3] https://www.itu.int/wftp3/av-arch/jvet-site/bitstream_exchange/VVC/draft_conformance/draft6/
[4] https://github.com/fluendo/fluster/
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7339>
I wanted to check if an element had the SINK flag and realized it was
not displayed in gst-inspect.
The clock flags were already reported as part of the "clocking
capabilities" info but best to have them explicitly listed here as well.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7641>
In my tests with the new GCC 14 compiler for Cerbero, I got the
following error:
> In file included from include/directxmath/DirectXMath.h:2275,
> from ../gst-libs/gst/d3d11/gstd3d11converter.cpp:46:
> include/directxmath/DirectXMathMatrix.inl: In function 'bool
> DirectX::XMMatrixDecompose(XMVECTOR*, XMVECTOR*, XMVECTOR*, FXMMATRIX)':
> include/directxmath/DirectXMathMatrix.inl:1161:16:
> error: variable 'aa' set but not used [-Werror=unused-but-set-variable]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7658>
Check and generate remote reception statistics from the info stored on
internal sources, as they are stored there when running against newer rtpbin
since MR !7424
This fixes cases where statistics are incomplete when
peers send RR reports from a single remote ssrc, which GStreamer does
when bundling is enabled and other RTP stacks may too.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7425>
In some cases, decodebin3 will send us incomplete caps (not containing
codec_data), and then a GAP event, which will force a negotiation.
This segfaults due to a null pointer deref because self->input_state
is NULL.
The only possible fix is to avoid negotiating when we get incomplete
caps (to avoid re-negotiationg immediately afterwards, which isn't
supported by some muxers), but also set as much input state as
possible so that a renegotiation triggered by a GAP event can complete
successfully.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7634>
Move RB info from receiver reports into the internal source that the RR
are about, and deprecate (but retain) the old mapping where each
external source has only a single RB entry in the rtp statistics.
The old method is broken if a remote peer uses a single ssrc to send
receiver reports for more than one of our internal sources, other
as multiple RB in a single packet, or alternate RB in different reports.
In each case only the most recent entry was kept, overwriting data for
other internal sources.
In multicast scenarios each internal source may receive multiple
receiver reports from different peers. To support that, all received
RR's are now stored into a hash table indexed by the sender's SSRC,
and all RRs are placed into an array when generating statistics, so
that the information from all peers is retrievable.
The current deficient behaviour (adding RB info into non-internal RTPSources) is
deprecated but kept in order to be backward compatible, and retained
that way in the generated statistics structure.
Refs
[1] https://tools.ietf.org/html/rfc3550#section-6.4.1
Based on a patch by Fede Claramonte <fclaramonte@twilio.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7424>
This commit fixes two issues:
- The event must be posted *after* calling stop, otherwise a race condition can occur and the app never stops
- isFinishedLaunching and applicationDidFinishLaunching are not always synchronized, causing sometimes
a deadlock on the g_cond_wait never catching the g_cond_signal
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7593>
In order to ensure all initial events (stream-start, caps, ..) are present on
pads that we expose, those various sticky events are propagated (from parsebin
to multiqueue output, from multiqueue output to exposed pads).
The problem was that the "hack" in `urisourcebin` to inform downstream elements
that the stream is parsed data and a collection will be present was only done in
one place : a probe on the output of parsebin ... but the stream-start could
potentially have already been propagated to the output pads before that.
In order to fix that, we make sure any pending sticky stream-start event is
updated before being propagated.
Fixes#3788
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7598>
This new LCEVC encoder plugin is meant to implement all LCEVC encoder elements.
For now, it only implements the LCEVC H264 encoder (lcevch264enc) element. This
element essentially encodes raw video frames using a specific EIL plugin, and
outputs H264 frames with LCEVC data. Depending on the encoder properties, the
LCEVC data can be either part of the video stream as SEI NAL Units, or attached
to buffers as GstMeta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This new element wraps both the base H264 decoder and lcevcdec elements into a
bin so that LCEVC decoding works with auto-plugging elements such as decodebin.
By default, the H264 decoder element with higher rank is used as base decoder,
but any particular H264 decoder can be used by manually setting the base-decoder
property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This new LCEVC decoder plugin is meant to implement all LCEVC decoder elements.
For now, it only implements the LCEVC enhancement decoder (lcevcdec) element.
This element essentially enhances raw video frames using the LCEVC metadata
attached to input buffers into a higher resolution frame. The element is only
meant to be used after any base decoder (eg avdec_h264).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
There was an override to fake an IDR as soon as a SPS/PPS
is encountered, but that's not valid, at least an i-slice is needed.
Amend the visl result, as the output is slightly more correct, not
duplicating frame_num.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This improves the h264parse element to attach LCEVC enhancement data to buffers
using the new GstLcevcMeta API. This metadata will eventually be used downstream
by LCEVC decoders to enhance the RAW video frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
This new metadata API allows elements to attach LCEVC enhancement data to video
buffers. Usually, the video parser elements are charged to parse the LCEVC
enhancement data from SEI Nal units (Supplemental enhancement Information).
However, other elements such as demuxers can also use this API if the LCEVC
enhancement data of the video is stored in a separate stream in the container.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7330>
Previously urisourcebin only allows stream-collections messages from adaptive
demuxers or sources to be posted.
This commit also allows the case where they come from a single parsebin. We
still want to prevent it in the case where they are multiple parsebins, since
that would require some form of aggregation to show a single/unified collection.
In order to avoid a regression with uridecodebin3 behavior, we also implement
support for GST_QUERY_SELECTABLE, so that uridecodebin3 can figure out whether
it should let GST_MESSAGE_STREAM_COLLECTION flow upwards (because app/user could
react on it) or whether it drops it in order for decodebin3 to do the collection
aggregation and posting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7597>
The presence (or not) of a collection on an input will determine whether events
will be throttled so that there are only forwarded when that input gets a valid
collection.
Therefore the input lock should be used.
In addition to that, we want to ensure that the application/user has a chance to
reliably (i.e. synchronously) specify what streams it is interested in by
sending a GST_EVENT_SELECT_STREAMS.
But we cannot allow anything to go forward until that message posting has come
back, otherwise we run in various races.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3872
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7594>
P010 uses 16 bits per pixel, with least significant being padding. This
code worked with Intel display driver since they roundup that value, but
does not work with the generic DRM helpers which also support NV15,
which does not have any padding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7580>
Temporarily release the video decoder stream lock so that other
threads can continue decoding (e.g. call get_frame()) while data
is being pushed downstream.
At this point it is locked twice, we release one, and then the base class
releases the last one just before pushing the data.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7576>
This is an efficient string storage for short strings without heap allocations,
and falling back to the heap for bigger allocations. Almost all structure fields
and structure names in use nowadays are short enough to not require a heap
allocation.
As structure names and fields are sometimes dynamically created, storing them in
a GQuark can create a memory leak and potentially a DoS attack by continously
triggering creating of new quarks.
Thanks to Tim for coming up with the name!
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7432>
D3D12_HEAP_FLAG_CREATE_NOT_ZEROED flag was introduced as of
Windows 10 May 2020 Update, and older versions don't understand
the heap flag. Checks the feature support and enables the
D3D12_HEAP_FLAG_CREATE_NOT_ZEROED only if it's supported by OS
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7573>
The uvcsink was limited to only transfer YUY2 and MJPEG. For the
uncompressed formats there is no technical reason not to support them.
Since gst_video_format_to_string is already supporting more fourcc than
only YUY2 we use the default path in gst_v4l2uvc_fourcc_to_bare_struct
to create structures for more formats and bail out if the returned
format is not from the uncompressed type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6037>
A zero-sized box is not really a problem and can be skipped to look at any
possibly following ones.
BMD ATEM devices specifically write a zero-sized bmdc box in the sample
description, followed by the avcC box in case of h264. Previously the avcC box
would simply not be read at all and the file would be unplayable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7564>
This notably follow the way we order the template and keeps the
format:Interlaced caps at the end. This change also fixes
an early skip check, that would skip if a driver only supports
alternate interlacing for a specific format. It also fixes
a bug where only the last resolution of a discrete frame size
was allowed to use format:Interlaced. Finally, similar to template
caps code, simplify the caps for earch featurs, making the debug output
manageable and (marginally) improve negotiation speed.
This change will make it easier to introduce memory:DMABuf.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7540>
In qml6glsrc, we capture the application by copying the back buffer into
our own FBO. The afterRendering() signal is too soon as from the apitrace, the
application has been rendered into a QT internal buffer, to be used as a cache
for refresh.
Use afterFrameEnd() signal instead. This works with no delay on GLES. With GL
it seems to reduce from 2 to 1 frame delay (this may be platform specific). A
different recording technique would need to be used to completely remove this
delay.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7351>
In fact, the va decoder is just a internal helper class and its access
is under the control of all dec elements. So far, there is no parallel
operation on it now.
At the other side, some code scan tools report race condition issues.
For example, the "context" field is just protected with lock at _open()
but is not protected at _add_param_buffer().
So we just delete all its lock usage.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7547>
Need HAVE_CONFIG_H to avoid build failure on Solaris 11.4 with gcc 14.1:
../subprojects/gstreamer/tests/misc/../../libs/gst/net/gstnetutils.c:71:7:
error: implicit declaration of function ‘setsockopt’
[-Wimplicit-function-declaration]
71 | if (setsockopt (fd, IPPROTO_IP, IP_TOS, &tos, sizeof (tos)) < 0) {
| ^~~~~~~~~~
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7553>
Timestamps are untouched by default, but the new mode can now be enabled to replace RTP timestamps
with ones generated from the buffer PTS. Making it an enum in case different modes are needed in the future.
That allows for a rtpjitterbuffer to do proper drift compensation, so that the stream coming out of gst-rtsp-server
is not drifting compared to the pipeline clock and also not compared to the RTCP NTP times.
Most of the code is borrowed from rtpbasepayload, as it's exactly its behaviour which I wanted to bring here.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7526>
Valgrind complains about uninitialized memory used in an ioctl
Syscall param ioctl(VKI_V4L2_G_TUNER).reserved points to uninitialised byte(s)
at 0x719294F: ioctl (ioctl.c:36)
by 0x3126A817: gst_v4l2_fill_lists (v4l2_calls.c:185)
by 0x3126A817: gst_v4l2_open (v4l2_calls.c:589)
by 0x3123F1C2: gst_v4l2_device_provider_probe_device (gstv4l2deviceprovider.c:122)
by 0x3123F648: gst_v4l2_device_provider_device_from_udev (gstv4l2deviceprovider.c:301)
by 0x3123F998: provider_thread (gstv4l2deviceprovider.c:395)
by 0x796FA50: ??? (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.7200.4)
by 0x710CAC2: start_thread (pthread_create.c:442)
by 0x719DA03: clone (clone.S:100)
Address 0x44008a34 is on thread 11's stack
in frame #1, created by gst_v4l2_open (v4l2_calls.c:524)
Uninitialised value was created by a stack allocation
at 0x3126A024: gst_v4l2_open (v4l2_calls.c:524)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6144>
Be smarter when allocating sink and source memory pools to reduce the
memory footprint. Use gst_v4l2_decoder_get_render_delay() to know the
need number of buffers for downstream element.
Handle errors in case of memory allocation failures.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7544>
This is not trully supported in V4L2, but we can emulate this similar to
what other elements do. In this patch we ensure that 0/1 is supported by
encoders (caps query),and uses a default of 30fps whenever we need to
set a framerate into the driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7352>
It has to be included in the block duration but in GStreamer we're not
including it in the buffer duration, so it has to be added again here.
Not including it in the block duration can lead to fatal errors when playing
back with Firefox if there are more padding samples than actual samples, e.g.
> D/MediaDemuxer WebMDemuxer[7f6a0808b900] ::GetNextPacket: Padding frames larger
> than packet size, flagging the packet for error (padding: {13500000,1000000000},
> duration: {6000,1000000}, already processed: false)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7502>
By setting the earliest time to timestamp + 2 * diff there would be a difference
of 1 * diff between the current clock time and the earliest time the element
would let through in the future. If e.g. a frame is arriving 30s late at the
sink, then not just all frames up to that point would be dropped but also 30s of
frames after the current clock time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7459>
This makes sure that if upstream has different latencies that we're still
outputting buffers with increasining timestamps across the different streams
unless buffers are arriving after the latency deadline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7500>
splitmuxsink can't possibly know how much latency it will introduce as it always
keeps one GOP around before outputting something. This breaks the latency
configuration of the pipeline and we're better off just pretending that
everything downstream of the sinkpads is not live.
Especially muxers that are based on aggregator and time out on the latency
deadline can easily misbehave otherwise as the deadline will be exceeded usually.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7499>
Adding prefer-stream-ordered-alloc property to GstCudaContext.
If stream ordered allocation buffer pool option is not configured
and this property is enabled, buffer pool will enable the stream
ordered allocation. Otherwise it will follow default behavior.
If GST_CUDA_ENABLE_STREAM_ORDERED_ALLOC env is set,
default behavior is enabling the stream ordered allocation.
Otherwise sync alloc/free method will be used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7427>
Default CUDA memory allocation will cause implicit global
synchronization. This stream ordered allocation can avoid it
since memory allocation and free operations are asynchronous
and executed in the associated cuda stream context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7427>
While transforming the internals of waylandsink into a library, the
context type name was accidentally changed, causing an ABI break. Change
it back to its original (as used by the libgstgl), and add support for
the misnamed version as a backward compatibility measure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7482>
The version was incorrectly encoded in the opj_config.h header with
the earlier version, which caused a compilation warning.
```
../subprojects/gst-plugins-bad/ext/openjpeg/gstopenjpegenc.c:943:5: warning: ‘bpp’ is deprecated:
Use prec instead [-Wdeprecated-declarations]
943 | comps[i].bpp = GST_VIDEO_FRAME_COMP_DEPTH (frame, i);
| ^~~~~
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7481>
When no ports are given, gst_jack_get_ports() is called to get all the
(physical) output ports but then the result is ignored, triggering the
"No physical output ports found..." error.
Instead, move the queried ports to the variable we're going to use
later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7474>
If the UVC gadget announces multiple formats in the descriptors the uvcsink
doesn't select the actual format but let's the UVC hosts select the format.
If the GStreamer pipeline is started before a UVC host selected the format,
upstream decides on a format until the UVC host has decided. In this case, the
current format needs to be set based on the caps from the caps event to be able
to detect if the format selection by the UVC host requires a format change on
the GStreamer pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7473>
The uvcsink may be put into the READY state to start listening for UVC requests.
Therefore, the UVC host may set a streaming format before the GStreamer pipeline
is started and the uvcsink received a caps event. In this case, prev_caps will
be NULL.
If the EVENT_CAPS has not been received, skip the check if the format needs to
be changed, since the sink will be started with the format selected by the UVC
host, anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7473>