When collection is updated, decodebin3 exposes pad first and then
streams-selected message is posted.
The condition can cause a situation where playbin3 links non-existing
combiner/playsink pads (since streams-selected is not posted yet) with
new decodebin output pad. This commit will re-check selected/active
streams condition on pad-added and reconfigure output if needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2482>
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.
But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
It is valid to have the padding set to 1 on the first packet and it
happens very often from TWCC packets coming from libwebrtc. This means
that we were totally ignoring many TWCC packets.
Fix test that checked that a first packet with padding was not valid and
instead test a single twcc packet with padding to check precisely what
this patch was about.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2422>
Background:
Whenever a caps event is received by appsink, the caps are stored in the
same internal queue as buffers. Only when enough buffers have been
popped from the queue to reach the caps, `priv->sample` gets its caps
updated to match, so that they are correct for the following buffers.
Note that as far as upstream elements are concerned, the caps of appsink
are updated immediately when the CAPS event is sent. Samples pulled from
appsink retain the old caps until a later buffer -- one that was sent by
upstream elements after the new caps -- is pulled.
The race condition:
When a flush is received, appsink clears the entire internal queue. The
caps of `priv->sample` are not updated as part of this process, and
instead remain as those of the sample that was last pulled by the user.
This leaves open a race condition where:
1. Upstream sends a new caps event, and possibly some buffers for the
new caps.
2. Upstream sends a flush (possibly from a different thread).
3. Upstream sends a new buffer for the new caps. Since as far as
upstream is concerned, appsink caps are the new caps already, no new
CAPS event is sent.
4. The appsink user pulls a sample, having not pulled before enough
samples to reach the buffers sent in step 1.
Bug: the pulled sample has the old caps instead of the new caps.
Fixing the race condition:
To avoid this problem, when a buffer is received after a flush,
`priv->sample`'s caps should be updated with the current caps before the
buffer is added to the internal queue.
Interestingly, before this patch, appsink already had code for this, in
gst_app_sink_render_common():
/* queue holding caps event might have been FLUSHed,
* but caps state still present in pad caps */
if (G_UNLIKELY (!priv->last_caps &&
gst_pad_has_current_caps (GST_BASE_SINK_PAD (psink)))) {
priv->last_caps = gst_pad_get_current_caps (GST_BASE_SINK_PAD (psink));
gst_sample_set_caps (priv->sample, priv->last_caps);
GST_DEBUG_OBJECT (appsink, "activating pad caps %" GST_PTR_FORMAT,
priv->last_caps);
}
This code assumes `priv->last_caps` is reset when a flush is received,
which makes sense, but unfortunately, there was no code in the flush
code path resetting it.
This patch adds such code, therefore fixing the race condition. A unit
test demonstrating the bug and testing its behavior with the fix has
also been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2413>
gst_value_serialize() does more than what's needed to printf-ing
especially when given GValue is already string. Just print string
value as-is without gst_value_serialize() to avoid unreadable
string print, especially for multi-bytes character encoding cases.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2387>
* Remove fields no longer used, or that can be replaced by smaller code
* Rename "channels" to a more meaningful "input pads"
* Directly handle/use combiner pads in the combiners instead of on the playbin3
main structure
Remove the corresponding combiner sinkpad whenever a uridecodebin3 source pad
goes away
* If used, store the corresponding combiner sink pad in the SourcePad helper
structure
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2384>
As implemented, we only support OpenGL 3 API from version 3.2. Though, there
is no issue enabling GLSL 1.30 even if we are going to restrict our API usage
to 2. This allows using texelFetch() on OpenGL 3.0 and 3.1 drivers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
Since the addition of tiling format with subsampled tile size
(NV12_16L32S), getting the tile width/height shifts and tile
size have become more complex. Add a helper to extract and
scale this information for the selected plane and format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
The decision to store the input buffer depends on whether extensions
are to be added to the output buffer, I assume as an optimization.
This creates an issue for subclasses that call negotiate(), where
header_exts is actually populated, from their handle_buffer()
implementation: at chain time, no header extension has been negotiated
yet, which means that we don't add extensions to the first batch of
buffers that comes out.
Keep track of whether negotiate has been called (this is different
from the negotiated field) and always store the input buffer until
then. This fixes the issue while largely preserving the optimization.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2304>
Pipeline such as:
gst-launch-1.0 -vf videotestsrc ! video/x-raw,format=NV12,colorimetry=\(string\)bt709 \
! videoscale ! video/x-raw,format=I420 ! fakesink
Always trigger a error:
ERROR video-info video-info.c:556:gst_video_info_from_caps: no width property given
Because it is called before the fixate_size(), the src caps' resolution
may be absent or not fixed. That causes that the src video info can not
be created correctly and we can not inherit the colorimetry and chroma-site
from the input caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2289>
Fixing this pipeline:
gst-launch-1.0 filesrc location=sample.png ! pngdec ! videorate ! fakesink
- videorate receives a single buffer with pts = 0, duration = invalid;
- then it receives eos triggering this buffer to be pushed downstream;
- the pushing code was assuming that a duration was set, which is
impossible as we received a single buffer and no output framerate was
set either. So the best we can do is to push the buffer without
duration.
Fix#1177
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2296>
GAP events flagged with MISSING_DATA are transformed into GAP buffers
flagged with CORRUPTED.
In these cases, it is preferable to simply keep rendering the previous
buffer (if there was one) instead of flashing the pad in and out of
view.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
Returning TRUE from the `transform_meta` function tells
GstBaseTransform to copy the meta into the new buffer. If videoscale
has already transformed a meta by scaling it, it should always return
FALSE to avoid duplicating the meta.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1630>
Since d0133a2d11 "videoconvert: Allow
passthrough for ANY caps features" videoconvert will always claim that
it supports any kind of memory which is true in very specific case (when
it is running in passthrough mode). To get elements that autoplug
converters depending on the caps running in the pipeline (like
autovideoconvert), we need to have converters no lie about what they can
do when queried `accept_caps` or `query_caps`.
This still accepts any caps feature as before but it introduces
a restriction in the way we handle memory capsfeatures.
We keep previous behaviour in videoconvert and videoscale.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
Now that videoconvert and videoscale's are both based on
GstVideoConverter and are using the exact same code, it makes much more
sense to have one element doing the two operation, and it can be
more efficient in some cases (one single path for both operations).
This removes the `videoscale` and `videoconvert` plugins but keeps the element
but makes them also do both operations (adding some APIs to each element).
There is a small change in API for the `videoscale:dither` property which
was previously a totally unused boolean, it is now an enum and is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
The format of the caps fields is
ssrc-(SSRC_VALUE)-(ATTRIBUTE_NAME)=(ATTRIBUTE_VALUE)
.
Parsing of the attributes from the caps into the SDP is not implemented
as this depends not only a single stream's caps but on the whole rtpbin
configuration.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.
This seems to have also fixed some documentation issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
get_merged_collection() returns an owned stream collection and was
leaked in the else block.
Fix leak when running:
GST_TRACERS=leaks GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/954>
Make sure that the requested stream selection isn't identical to the current
one. If that's the case, just carry on as usual.
This avoids multiple `streams-selected` posting ... when the selection didn't
change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2185>
timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>
The documentation could be read to mean that the caller continuous to
'own' the buffer, and that there is some other mechanism to find out
when to unref it.
Clarify that "not taking ownership" here means "taking a reference",
and specify that you can unref it at any time after calling the
function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2110>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
The console HANDLE will be keep signalled state unless application
reads console input buffer immediately. So we should read and flush
console input buffer from the thread where the event is signalled,
instead of GMain context thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2058>
Configure playsink tried element with the bus of the main pipeline.
That tried element can be a gl video sink, which would benefit from being
able to propagate context messages to the main pipeline and have other
internal pipeline elements configured with it. Having different elements
configured with the same GL context allows them to share buffers with
video/x-raw(memory:GLMemory) caps and achieving zero-copy.
Thanks to Alicia Boya García <aboya@igalia.com> for her work co-debugging
the issue and contributing to find a solution.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2056>
Sources that can internally handle buffering shouldn't have yet-another
buffering element after it. This can be simply detected by checking if it can
answer a TIME BUFFERING query just after creation.
If that is the case, we can expose the element source pads directly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
Use the return value from gst_element_link_pads() and gst_bin_add()
Fixes:
../ext/gl/gstglmixerbin.c:305:12: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
gboolean res = TRUE;
^
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2038>
Add 5 new navigation event types for touchscreen events, with the same
naming and meaning as in libinput - touch-down, touch-motion, touch-up,
touch-frame and touch-cancel - as well as constructors and parse
functions for them.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Add a function to get x/y coordinates from suitable navigation events,
and one to create a copy with given coordinate values.
For e.g. translating event coordinates, this avoids having to either
switch on the event type to select the right parse function, or
having to rely on implementation details of the underlying event
structure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
This deprecates the current send_event interface, and the wrapper
functions based on it, replacing it with a send_event_simple interface and
wrapper function. Together with the new event constructors, this avoids
implementations having to directly access the underlying structure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
The default query handler would go through typefind, which by default accepts
any CAPS. But once configured, parsebin can't reconfigure itself, it should
therefore pass through the ACCEPT_CAPS query to the first element after
typefind (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
Don't reconfigure outputs when the select-streams
event is sent from the app, as the selection may
not take effect for some time. Instead, wait
for the pipeline to confirm the new set of
selected streams when it sends the message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
If we previously had subtitles coming in, the video
may be chained through a text overlay block. Before,
the code would end up trying to link pads that were
already linked and video would not get reconnected
properly.
To fix that, make sure that the candidate
pads are actually unlinked first. If a textoverlay
is present and no longer needed, it will be cleaned
up later in the reconfiguration sequence.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1900>
Requesting a new pad can start a reconfiguration cycle, where
playsink will block all input pads and wait for data on them
before doing internal reconfiguration. If a pad is released,
that reconfiguration might never trigger because it's now waiting
for a pad that doesn't exist any more.
In that case, complete the reconfiguration on pad release.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1180>
Fix a small race where a group can receive stream-start
and post a pending buffering message just as another
thread posts a different buffering message, causing them
to be received by the application out of order. In the
worst case, this leads the application receiving a
stale 99% buffering message and going back to buffering
right after the 100% buffering message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1840>
As specified formally in RFC8851
Each rid description is placed in its own caps field in the structure.
This is very similar to the already existing extmap-$id sdp<->caps
transformations that already exists.
The mapping is as follows:
a=rid:0 direction ';'-separated params
where direction is either 'send' or 'recv'
gets put into a caps structure like so:
rid-0=(string)<"direction","param1","param2",etc>
If there are no rid parameters then the caps structure is generated to
only contain the direction as a single string like:
rid-0=(string)direction
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1760>
Remove the symbolic link `gst-uninstalled` which points to `gst-env`.
The `uninstalled` is the old name and the project should stick to a
single name for the procedure.
Remove the term from all the files, exceptions are variables from
dependencies like `uninstalled_variables` from pkgconfig and
`meson-uninstalled`.
Adjust mentions of the script in the documentation and README.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
Do not maintain similar build instructions within each gst-plugins-*
subproject and the subproject/gstreamer subproject. Use the build
instructions from the mono-repository and link to them via hyperlink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
While this is slightly more expensive (~48% slower per random number) it
does not cause any measurable difference when running through a complete
audio conversion pipeline.
On the other hand its random numbers are of much higher quality and on
spectrograms for 32 bit to 24 bit conversion the difference is clearly
visible.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1729>
The instant-rate value in the TrickMode enum is a
flag, but the other values are not. Move instant-rate
to the end of the enum and give it a value large enough
for it to be used without modifying the trick-mode
setting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1788>
They can't be used in any useful way. The type of every GstMemory is
always GST_TYPE_MEMORY and the subtyping relationship has to be
implemented on top of that via the associated allocator and mem_type
string.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1764>
This is a minimal unit test the show that the stride extrapolation can work
with all pixel format we support. This minimal verify that the extrapolation
match the stride we set into GstVideoInfo with 320x240 for all the pixel
format we support. The tiles formats are skipped, since their stride is
set as two 16bit integers, and we also skip over palette planes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
Many of the legacy APIs, specifically in the Linux Kernel, have a
single stride for the pictures. In this context, it is common
to extrapolate the other strides based on the selected pixel
format. Such function have been copy pasted from video4linux2
plugin into wayland, kms and v4l2codecs plugins.
This patch implements a generalized from of that function and
make it available to everyone through the video library.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
Unlike other simple tiled formats, the Mediatek HW use different tile size
per-plane. The tile size is scaled according to the subsampling. Effectively,
using the name 16L32S to represent linearly layout tiles of size 16x32 bytes
in the Y plane, and 16x16 in the UV plane. In order to make this specificity
discoverable, a new SUBTILES flags have been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
... instead of round(). Depending on framerate, calculated position
may not be clearly represented by using uint64, 30000/1001 for example.
Then the result of round() can be sliglhtly larger (1ns) than
buffer timestamp. And that will cause unnecessary frame delay.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1747>
If a serialized event arrives behind a buffer, it should not be send before
it. This fixes the pending event handling so that only early pending events,
the one that arrrived or was generated while the adapter was empty get send
before pushing buffer. All other events are not pushed after.
This issue lead the latency tracer to think our audio encoder did not have any
latency. This was testing with opusenc in a live pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1266>
For artificial input (in unit tests), all six bytes of
constraint_indicator_flags in hevc_caps_get_mime_codec() can be
zero. Add a guard against an out-of-bounds error that occurred in that
case. Change variables to signed int so comparison with -1 works.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1677>
... in order to make older g-i happy (~1.60) which doesn't like
freeform descriptions in the value_name field. Which in turn
then makes hotdoc happy instead of erroring out when we bump
the symbol index version.
We usually only (ab)use the name field for description strings
for private plugin enums, not for public API visible to bindings.
This lets glib-mkenum generate the _get_type() function for the
enum again, which in turn will generate the expected value names
to match the enums.
We might be able to add this back later once we can upgrade the
g-i version requirement (and the documentation job image).
This reverts most of commit b0aab48cdcf0a454d14aeb4d907209d8ee3f1add
There's a race condition in gsttagdemux.c between typefinding and the
end-of-stream event. If TYPE_FIND_MAX_SIZE is exceeded,
demux->priv->collect is set to NULL and an error is returned. However,
the end-of-stream event causes one last attempt at typefinding to occur.
This leads to gst_tag_demux_trim_buffer() being called with the NULL
demux->priv->collect buffer which it attempts to dereference, resulting
in a segfault.
The malicious MP3 can be created by:
printf "\x49\x44\x33\x04\x00\x00\x00\x00\x00\x00%s", \
"$(dd if=/dev/urandom bs=1K count=200)" > malicious.mp3
This creates a valid ID3 header which gets us as far as typefinding. The
crash can then be reproduced with the following pipeline:
gst-launch-1.0 -e filesrc location=malicious.mp3 ! queue ! decodebin ! audioconvert ! vorbisenc ! oggmux ! filesink location=malicious.ogg
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/967
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1620>
Hotdoc should be able to extract and parse comments out of these. Just
need to be careful to only add the glob in directories that actually
contain *.m (objc) and *.mm (objcpp) files.
Also fix some doc comments and remove redundant ones.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1614>
This is usually necessary to allow gst-indent to treat it as
a statement, but we do not run gst-indent on headers and we do not
have extra semicolons in other places that this macro is used in the
header. Fixes warnings when using the header:
```
In file included from gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/video.h:185,
from XYZ:9001:
gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/gstvideoaggregator.h:206:78: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
206 | G_DEFINE_AUTOPTR_CLEANUP_FUNC(GstVideoAggregatorConvertPad, gst_object_unref);
| ^
gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/gstvideoaggregator.h:214:181: warning: ISO C does not allow extra ‘;’ outside of a function [-Wpedantic]
214 | G_DECLARE_DERIVABLE_TYPE (GstVideoAggregatorParallelConvertPad, gst_video_aggregator_parallel_convert_pad, GST, VIDEO_AGGREGATOR_PARALLEL_CONVERT_PAD, GstVideoAggregatorConvertPad);
| ^
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1572>
The earlier size of 2 MB was set back in 2009, it doesn't
seem unreasonable to raise it to 8 MB these days. The use
case at hand is matroskademux containing both a video stream
with a very low amount of compression but no decoding latency,
and a H265 stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1538>
Sometimes we can't output anything because we don't have enough
incoming frames. In that case, the resampler was trying to call
do_quantize() and do_resample() in a loop forever because there would
never be samples to output (so chain->samples would always be NULL).
Fix this by not calling chain->make_func() in a loop -- seems
completely unnecessary since calling it over and over won't change
anything if the make_func() can't output samples.
Also add some checks for the input and / or output being NULL when
doing conversion or quantization. This will happen when we have
nothing to output.
We can't bail early, because we need resampler->samples_avail to be
updated in gst_audio_resampler_resample(), so we must call that and
no-op everything along the way.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1461>
BT.2020 color primaries are designed to cover much wider range of
CIE chromaticity than BT.709, and also it's used for both SDR and HDR
contents. So, the incorrect assumption (i.e., BT.709 as a BT.2020)
is risky and resulting image color tends to be visually very wrong.
Unless there's obvious clue, don't consider color space of high resolution
video stream as BT.2020
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1445>
The ["level-asymmetry-allowed"] field states that the peer wants the
profile specified in the "profile-level-id" fields but doesn't care
about the level. To express this in GStreamer caps term, we add a
"profile" field in the caps, which reuses the usual "profile" semantics
for H.264 streams and, and remove "profile-level-id" and
"level-asymmetry-allowed" fields.
["level-asymmetry-allowed"]: https://www.iana.org/assignments/media-types/video/H264
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1410>
There's a potential race condition with this sort of pipelines on
certain systems (depends on the processing load):
GST_DEBUG_DUMP_DOT_DIR=/tmp \
gst-launch-1.0 uridecodebin3 uri=file://stream.mp4 ! glupload ! \
glimagesink --gst-debug=*:4
Right after the pipeline passes from PAUSED to READY, bin_to_dot_file
dumps uridecodebin3 properties, but current uri and suburi might be
already freed, causing a potential use-after-freed.
This patch makes NULL the current item right after all the play items
are freed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1353>
Sometimes the resampler has enough space to store all the incoming
samples without outputting anything. When this happens,
gst_audio_resampler_get_out_frames() returns 0.
In that case, the resampler should consume samples and just return.
Otherwise, we get a segfault when gst_audio_resampler_resample() tries
to resample into a NULL 'out' pointer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1343>
If the pad does not have a current caps, get_pad() returns the query
caps which can be ANY. In such case the caps does not have any structure
resulting in a critical warning when calling gst_caps_get_structure().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1254>
... in favour of dep.get_variable('foo', ..) which in some
cases allows for further cleanups in future since we can
extract variables from pkg-config dependencies as well as
internal dependencies using this mechanism.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
Currently the extension data length specified in the RTP header would
say it was shorter then the data serialised to a packet. When
combining the resulting buffer, the underlying memory would still
contain the extra (now 0-filled) padding data.
This would mean that parsing the resulting RTP packet would potentially
start with a number of 0-filled bytes which many RTP formats are not
expecting.
Such usage is found by e.g. RTP header extension when allocating the
maximum buffer (which may be larger than the written size) and shrinking
to the required size the data once all the rtp header extension data has
been written.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1146>
