gst_buffer_set_qdata() will leak the structure passed to it
when called incorrectly (e.g. on a non-metadata-writable buffer).
This is expected, but we must avoid doing that in valgrind.
Try to avoid floating point maths for each pixel to be blended in
inner loop, and try to avoid the multiplication entirely for the
most common case of the global alpha being 1. Could probably be
refactored a bit more.
extract_alpha and apply_global alpha always return TRUE really,
so just do away with the return value. Convert a g_return_if_fail()
into a g_assert(), since this is only to check internal consistency
and not a guard for public API. Add some locking.
https://bugzilla.gnome.org/show_bug.cgi?id=668483
Don't typedef them to GObjectClass directly, but hide behind
private structs. Fixes issues with gobject-introspection
and GstEncodingProfileClass.
https://bugzilla.gnome.org/show_bug.cgi?id=668542
If we are asked to (un)premultiply,we need to create the new rectangle
with the right flags, so we can find it properly on subsequent cache
lookups (also because it's wrong otherwise).
https://bugzilla.gnome.org/show_bug.cgi?id=668483
We need to copy the pixels before messing with them, not least
because the buffer creation code below assumes it's ok to take
ownership.
Fixes crash caused by double-free.
https://bugzilla.gnome.org/show_bug.cgi?id=668483
We require the videometa activated before we can implement the alignment of
buffers. Users of the bufferpool should do this manually based on the results of
the allocation query.
Install defaul map/unmap function on the metadata and really call the functions
instead of always calling a default implementation.
Rework some bits so that we don't have to mess with the GstMapInfo information
(adding the offset), instead pass the adjusted data pointer from the map function.
Even if watch->messages->length is 0 there may still be some
data from a message that was only written partially at the
previous attempt stored in watch->write_data, so check for
that as well. We don't want to write data into the middle
of another message, which could happen when there wasn't
enough bandwidth.
https://bugzilla.gnome.org/show_bug.cgi?id=669039
... so subclass can also rely upon never being bothered with some NULL buffer
it can't do any interesting with, or with any data before it received
any format configuration (and setup properly).
If we don't get a duration right away, set the pipeline to playing
and sleep a bit, then try again. This is ugly, but the least worst
we can do right now. The alternative would be to make parsers etc.
return some bogus duration estimate even after only having pushed
a single frame, for example.
Fixes discoverer showing 0 durations for some mp3 and aac files
(e.g. soweto-adts.aac).
We can't use G_DEFINE_*TYPE here because we need the klass in the _init
method to get to the padtemplates. Fixes 'GstTagDemux subclass GstTagDemux
did not set up a {sink,src} pad template' warnings.
This is necessary in order to match what the caps strings in
video.h contain for 16-bit rgb formats and also to match how
gst_video_format_parse_caps expects them.
https://bugzilla.gnome.org/show_bug.cgi?id=667681
Fix building of the libgstvideo module on Android by adding the
missing and needed $(DEFAULT_INCLUDES) to CFLAGS for the
androgenizer call on gst-libs/gst/video/Makefile.am
Before this change, building was failing due to gst-plugins-base/
and gst-plugins-base/gst-libs/gst/video being left out of the
include path.
Not that I have ever seen these in practice, but if they
can't happen we may just as well just assign the new tag
list. Merge properly to be on the safe side, and also
avoid a useless tag list copy in the normal case where
there is no tag list yet.
RTCP header can be (2^16 + 1) * 4 bytes long, so when validating a bogus
packet it was possible to get a 16bit overflow resulting in a length of 0.
This would put the gst_rtcp_buffer_validate_data function in a endless loop.
https://bugzilla.gnome.org/show_bug.cgi?id=667313
The available channel positions are all channels from SMPTE 2036-2-2008
(in that order) and DTS Coherent Acoustics, which are basically all 28
channels that currently can appear.
The channels are now expressed in the caps as a channel-mask, which
describes which of the channels are present, and an optional
channel-reorder-map, which must only be used after negotiation for
fixated caps.
For negotiation only the channel-mask and the channel count is relevant
and all elements are expected to handle all reorder maps. Elements that
don't can use the new API to reorder an audio buffer from any order to
another order.
This simplifies negotiation a lot while still having as few reorderings
necassary as possible and still allow all kinds of channel layouts.
Rename the offset field in GstVideoFormatInfo to poffset to avoid confusion with
the offset of the plane in the buffer. The poffset is the offset in the plane
where the first byte of the component data can be found.
Properly implement the COMP_OFFSET calculations.
Fix YV12 and YVU9, simply use the same offsets as the regular I420 and YUV9
variants, we use the plane info to reorder components already.
Improve the unit test.
When the payload for an Exif tag is less than or equal to 4 bytes,
the data is simply put into the offset field. Fix writing these
kinds of payloads on big endian systems (and possibly also on
little endian systems). The caller will have already formatted
the bytes in memory according to the writer's endianness, so just
write out the bytes as they are in this case. Fixes tags unit test
on big endian systems.
We used to add a trailing \n to the end of generated xmp packets.
Windows viewer was unhappy with it and we fixed it in
96d2120c2b
The problem is that this caused xmp generated before this fix
to not be recognized and parsed anymore. This patch makes it
recognize xmp with the trailing \n and without, fixing the
regression. Also adds tests for it.
Flesh out the video filter base class. Make it parse the input and output caps
and turn them into GstVideoInfo. Map buffers as video frames and pass them to
the transform functions.
This allows us to also implement the propose and decide_allocation vmethods.
Implement the transform size method as well.
Update subclasses with the new improvements.
Whereas the previous default 0 was backwards compatible in that it lead
to erroring out immediately upon any error, elements that are really
ported and using the base class error macro can be assumed to intend to
improve behaviour rather than maintaining the old one. So, make it easy
on those and any future one and tolerate some errors by default, as intended.
Fixes#666579.
Remove interlaced boolean from caps and replace with an interlace-mode enum.
document this new property in the video caps document. With the enum we can
put fields into separate video meta.
Add enum for this interlace-mode in the VideoInfo.
Update the buffer flags.
When using g_convert, we should only pass the length
of the string content (without the \0) as g_convert will
only parse the real contents when changing formats. Including
the \0 causes it to add another \0, increasing the string
size when not needed.
For example, when writting a North geo location ref entry, that should
be a string with a single N letter, it would write:
"N\0\0", causing the string to have size 3, instead of 2 as expected.
In our case, we can pass -1 and let g_convert calculate the strlen as
we don't use the length anywhere else.
This fixes jifmux's tests on gst-plugins-bad.
Slight change in semantics for convenience. Shouldn't cause any
problems since this function is usually only used on pre-filtered
caps and not random caps, and it's hard to imagine a situation
where someone would want to rely on the previous behaviour.
Basic API to attach overlay rectangles to buffers,
or blend them directly onto raw video buffers.
To be used primarily for things like subtitles or
logo overlays, not meant to replace videomixer.
Allows us to associate subtitle overlays with
non-raw video surface buffers, so that subtitles
are not lost and can instead be rendered later
when those surfaces are displayed or converted,
whilst re-using all the existing overlay plugins
and not having to teach them about our special
video surfaces. Could also have been made part
of the surface buffer abstraction of course, but
a secondary goal was to consolidate the blending
code for raw video into libgstvideo, and this
kind of API allows us to do both in a way that's
minimally invasive to existing elements, and at
the same time is fairly intuitive.
More features and extensions like the ability to
pass the source data or text/markup directly will
be added later.
https://bugzilla.gnome.org/show_bug.cgi?id=665080
API: gst_video_buffer_get_overlay_composition()
API: gst_video_buffer_set_overlay_composition()
API: gst_video_overlay_composition_new()
API: gst_video_overlay_composition_add_rectangle()
API: gst_video_overlay_composition_n_rectangles()
API: gst_video_overlay_composition_get_rectangle()
API: gst_video_overlay_composition_make_writable()
API: gst_video_overlay_composition_copy()
API: gst_video_overlay_composition_ref()
API: gst_video_overlay_composition_unref()
API: gst_video_overlay_composition_blend()
API: gst_video_overlay_rectangle_new_argb()
API: gst_video_overlay_rectangle_get_pixels_argb()
API: gst_video_overlay_rectangle_get_pixels_unscaled_argb()
API: gst_video_overlay_rectangle_get_render_rectangle()
API: gst_video_overlay_rectangle_set_render_rectangle()
API: gst_video_overlay_rectangle_copy()
API: gst_video_overlay_rectangle_ref()
API: gst_video_overlay_rectangle_unref()
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.
Replace g_thread_create() with g_thread_try_new().
gst_tag_image_data_to_image_buffer() ->
gst_tag_image_data_to_image_sample() And make it return a GstSample.
Store the image-type into the extra sample info.
Remove a deprecated tag
Make appsink return a GstSample. Remove the pull_buffer_list method because it
is not very useful anymore.
Pass GstSample to the conversion function.
Update playbin2 and examples
Remove old useless caps code.
Make a negotiate function and use the configured caps as the caps on the appsrc
pad. If nothing was configured, fall back to the parent implementation.
Make out args to gst_video_event_parse_{downstream|upstream}_force_key_unit
optional, update libgstvideo.def and fix docs a bit.
API: gst_video_event_new_upstream_force_key_unit
API: gst_video_event_new_downstream_force_key_unit
API: gst_video_event_is_force_key_unit
API: gst_video_event_parse_upstream_force_key_unit
API: gst_video_event_parse_downstream_force_key_unit
https://bugzilla.gnome.org/show_bug.cgi?id=607742
Originally decodebin couldn't deal with that in 0.10, but now simply
setting the caps when we know them should be enough. Pad activation
mode switching might need some more testing/tweaking with the new
arrangement.
gst_basertppayload -> gst_base_rtp_payload
Add pts/dts support in the depayloader
Remove old timestamp code
Add a default getcaps function so subclasses can chain up to it instead of
relying on the return value of the getcaps function.
Now we can configure how much time to wait before deciding that a
discont has happened.
Also, adds getter and setter to allow derived implementations to set
this value upon construction.
Suggestions and several improvements by Havard Graff.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
A common problem for audio-playback is that the timestamps might not
be completely linear. This is specially common when doing streaming over
a network, where you can have jittery and/or bursty packettransmission,
which again will often be reflected on the buffertimestamps.
Now, the current implementation have a threshold that says how far the
buffertimestamp is allowed o drift from the ideal aligned time in the
ringbuffer. This was an instant reaction, and ment that if one buffer
arrived with a timestamp that would breach the drift-tolerance, a resync
would take place, and the result would be an audible gap for the
listener.
The annoying thing would be that in the case of a "timestamp-outlier",
you would first resync one way, say +100ms, and then, if the next
timestamp was "back on track", you would end up resyncing the other way
(-100ms) So in fact, when you had only one buffer with slightly off
timestamping, you would end up with *two* audible gaps. This is the
problem this patch addresses.
The way to "fix" this problem with the previous implementation, would
have been to increase the "drift-tolerance" to a value that was greater
than the largest timestamp-outlier one would normally expect. The big
problem with this approach, however, is that it will allow normal
operations with a huge offset timestamp vs running-time, which is
detrimental to lip-sync. If the drift-tolerance is set to 200ms, it
basically means that lip-sync can easily end up being off by that much.
This patch will basically start a timer when the first breach of
drift-tolerance is detected. If any following timestamp for the next n
nanoseconds gets "back on track" within the threshold, it has basically
eliminated the effect of an outlier, and the timer is stopped. If,
however, all timestamps within this time-limit are breaching the
threshold, we are probably facing a more permanent offset in the
timestamps, and a resync is allowed to happen.
So basically this patch offers something as rare as both higher
accuracy, it terms of allowing smaller drift-tolerances, as well as much
smoother, less glitchy playback!
Commit message and improvments by Havard Graff.
Fixes bug #640859.
Otherwise we'll just error out when the first buffer gets pushed.
This is a porting artefact, in 0.10 the infos were allocated on the
heap, now we're doing everything with stack-allocated structs.
Not sure how this one got pulled into a merge. In 0.10, it was moved away to
gst-template a long time ago. gstaudiofilterexample.c got generated from
gstaudiofiltertemplate.c.
The array we're writing to is limited to 64 ... but the amount of
input positions might be lower than 64. Therefore use MIN and not
MAX to know how many values to read from the array.
Add a method to configure the output caps. Subclasses can't use
gst_pad_set_caps() anymore because then we won't see the caps.
Unbreak the padtemplate registration, the GTypeClass that is configured in the
object during _init is not the right one, we need to use the klass passed as the
argument to the init function..
This reverts commit 11e375486e.
GST_BOILERPLATE() can't define an abstract type and
G_DEFINE_ABSTRACT_TYPE() does not pass the class struct to
the instance_init function and there's no way to get the
class struct of the current type in instance_init().
There's no code whatsoever that uses these macros. If anyone
ever feels the need to resurrect them, we should add them to
gstutils.h in core or libgstaudio or so.
The /*< ... >*/ style is only used for public|protected|private,
signal comments use /* signals */. This prevents the some code
parsers/binding generators to be confused by the comment.
Merge in doc updates for audio enums from 0.10, and get rid
of the #if #else in the enum list, since that confuses gtk-doc.
Conflicts:
gst-libs/gst/audio/audio.c
gst-libs/gst/audio/audio.h
Remove the _ in front of the endianness prefix.
Remove the _3 postfix for the 24 bits formats.
Add a _32 postfix after the formats that occupy extra space beyond their
natural size.
The result is that the GST_AUDIO_NE() macro can simply append the endianness
after all formats and that we only specify a different sample width when it is
different from the natural size of the sample. This makes things more consistent
and follows the pulseaudio conventions instead of the alsa ones.
Leaving the GST_USE_UNSTABLE_API guards in until some of the
ported decoders have been updated and it's clear that I didn't
mess up anywhere porting things to the new audio API.
Adds little beyond baseaudiocodec (seeking, bit of query), and what it adds
is mainly out-of-scope (e.g. decoder seeking, should be done by upstream
demuxer/parser) and/or based on non-prime example (mad).
Moved most of the code to GstBaseAudioCodec, GstBaseAudioDecode is
now really small, maybe we do not really need it (or its encoder
counterpart). Added more API for subclasses and documentation.
Otherwise, discoverer will generated an "inner" codec
where there can be a tranformation (eg, kate -> DVD SPU,
and various ->text/x-pango-markup).
https://bugzilla.gnome.org/show_bug.cgi?id=639055
Without the perfect timestamp machinery, the RTP timestamp can be
computed directly from the running time of a buffer, but the perfect
timestamp patch broke that assumption. This patch restores it by
having the first perfect timestamp be the running time of that buffer
and counting from there.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=654434
Rename @view_id to @id.
Add an id to the video metadata. Add a method to get the metadata from a buffer
with the given id.
Make a method to map a frame with a certain id. This only maps the frame with
the given id on the video metadata. The generic frame id can be used when a
buffer carries multiple video frames such as in multiview mode but maybe also
when dealing with interlaced video that stores the fields in separate buffers.
Make enums for the chroma siting for easier use in the videoinfo.
Make enums for the color range, color matrix, transfer function and the
color primaries. Add these values to the video info structure in a Colorimetry
structure. These values define the exact colors and are needed to perform
correct colorspace conversion. Use a couple of predefined colorimetry specs
because in practice only a few combinations are in use.
Add view_id to the video frames to identify the view this frame represents in
multiview video.
Remove old gst_video_parse_caps_framerate, use the videoinfo for this.
Port elements to new colorimetry info.
Remove deprecated colorspace property from videotestsrc.
Rework the audio caps similar to the video caps. Remove
width/depth/endianness/signed fields and replace with a simple string
format and media type audio/x-raw.
Create a GstAudioInfo and some helper methods to parse caps.
Remove duplicate code from the ringbuffer and replace with audio info.
Use AudioInfo in the base audio filter class.
Port elements to new API.
Unlike linux, OSX wakes up select with POLLOUT (instead of POLLERR) when
connect() is done async and the connection is refused. Therefore always check
for the socket error state using getsockopt (..., SO_ERROR, ...) after a
connection attempt.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
We didn't handle unsynchronization at all up to now, which might have
caused frames to not be extracted - esp. frames after an APIC picture
frame. Fixes#577468.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Use new utility functions in libgsttag to process coverart (#512333).
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Generate the image-type values correctly. Leave them out of the caps
when outputting a "preview image" tag, since it only makes sense
to have one of those - the type is irrelevant.
* sys/sunaudio/gstsunaudiomixerctrl.c:
(gst_sunaudiomixer_ctrl_open):
If we can, mark the mixer multiple open when we use it, in case
(for some reason) the process wants to open it again elsewhere.
Original commit message from CVS:
Based on patch by: Tommi Myöhänen <ext-tommi.myohanen nokia com>
* gst-libs/gst/tag/id3v2frames.c: (parse_comment_frame):
Make sure the ISO 639-X language code in ID3v2 COMM frames
is actually valid UTF-8 (or rather: ASCII), so we don't end
up with non-UTF8 strings in tags if there's garbage in the
language field. Also make sure the language code is always
lower case. Fixes: #508291.
Original commit message from CVS:
* tag: id3v2: (parse_url_link_frame):
Parse WOAF frames and put the result into GST_TAG_CONTACT,
which is where it would end up if the same information was
put in a vorbis comment (don't think it's worth adding a
new URI tag for this). Fixes#488112.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
We don't want the same string multiple times in a tag list for the
same tag ever, for any tag, not just for GST_TAG_GENRE, so make sure
this doesn't happen and remove special-case code for GST_TAG_GENRE.
Original commit message from CVS:
Based on patch by: Jason Kivlighn <jkivlighn gmail com>
* gst-libs/gst/tag/id3v2frames.c:
Extract license/copyright URIs from ID3v2 WCOP frames
(Fixes#447000).
* tests/check/elements/id3demux.c:
* tests/files/Makefile.am:
* tests/files/id3-447000-wcop.tag:
Add simple unit test.
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c:
* gst-libs/gst/tag/gstid3demux.h:
* gst-libs/gst/tag/id3v2.c:
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c:
Port ID3 tag demuxer over to the new GstTagDemux in -base
(now would be a good time to test re-importing your music
collection).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Fix parsing of ID3 v2.2.0 PIC frames. Only in version >= 2.3.0 is
the image format a variable-length NUL-terminated string; in
versions before that the image format is a fixed-length string of
3 characters (see #348644 for a sample tag).
Also make supplied mime type lower-case and fix up 'jpg' to 'jpeg'.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_obsolete_tdat_frame):
Do not convert obsolete TDA/TDAT frames to TDRC frames, otherwise
the four-digit number will be interpreted as a year, whereas it is
month and day in DDMM format. Instead, parse TDAT frames and fix up
the date in the GST_TAG_DATE tag later if we also extracted a year.
Fixes#407349.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Make sure that g_free always gets called on the same pointer that was
returned by g_malloc. Fixes#376594.
Do not leak memory if decompressed size is wrong.
Remove unneeded check of return value of g_malloc.
Patch by: René Stadler <mail@renestadler.de>
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_text_identification_frame),
(parse_insert_string_field):
If strings in text fields are marked ISO8859-1, but contain
valid UTF-8 already, then handle them as UTF-8 and ignore
the encoding. (#351794)
Original commit message from CVS:
* configure.ac:
Require CVS of GStreamer core and -base (for
GST_TAG_EXTENDED_COMMENT and gst_tag_parse_extended_comment()).
* ext/taglib/gstid3v2mux.cc:
Write extended comment tags properly (#348762).
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame):
Extract COMM frames into extended comments, which makes it
easier to properly retain the description bit of the tag
and maintain this information when re-tagging (#348762).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
(id3demux_add_id3v2_frame_blob_to_taglist):
Extract frames for ID3v2 versions prior to ID3v2.3.0 properly as
well, and add the version to the blob's buffer caps, since that
information will be needed for deserialisation later on (#348644).
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c: (plugin_init):
* gst-libs/gst/tag/id3v2.c:
(id3demux_add_id3v2_frame_blob_to_taglist):
* gst-libs/gst/tag/id3v2.h:
On second thought, it might be wiser and more efficient
not to do tag registration from a streaming thread.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
(id3demux_add_id3v2_frame_blob_to_taglist),
(id3demux_id3v2_frames_to_tag_list):
Put ID3v2 frames we can't parse as binary blobs into private
tags, so that they are not lost when retagging, at least once
id3v2mux has been taught to re-inject those frames again.
See bug #334375.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_stream),
(gst_avi_demux_process_next_entry):
Fix some leaks.
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
Don't use \n in debug lines.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Set image type from APIC frame as "image-type" field
of GST_TAG_IMAGE buffer caps (#344605).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(scan_encoded_string), (parse_picture_frame):
Extract images from ID3v2 tags (APIC frames). Fixes#339704.
* configure.ac:
Require core >= 0.10.8 (for GST_TAG_IMAGE and
GST_TAG_PPEVIEW_IMAGE used in the patch above).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
A track/volume number or count of 0 does not make sense,
just ignore it along with negative numbers (a tag might
only contain a track count without a track number).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
Don't output any tag when we encounter a negative track number - the
tag type is uint, so we end up outputting huge positive numbers
instead. (Fixes: #342029)
Original commit message from CVS:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_find_best):
* gst/autodetect/gstautovideosink.c:
(gst_auto_video_sink_find_best):
Make the name of the child element be based on the name of the
parent, so that debug output is more useful.
* gst-libs/gst/tag/id3v2frames.c: (find_utf16_bom),
(parse_insert_string_field), (parse_split_strings):
Rework string parsing to always walk over BOM markers in UTF16
strings, using the endianness indicated by the innermost one,
then trying the opposite endianness if that fails to convert
to valid UTF-8. Fixes#341774
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_insert_string_field):
Some more debug info. No need to check whether the string
returned by g_convert() is really UTF-8 - either it is or
we get NULL returned.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_genre_fields_to_taglist):
Fix parsing of numeric genre strings some more, by ensuring that
we only try and parse strings that a) Start with '(' and b) Consist
only of digits.
Also, when finding an escaping '((' sequence, bust it back to '(' by
swallowing the first parenthesis
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (has_utf16_bom),
(parse_split_strings):
Recognise and skip any byte order marker (BOM) in
UTF-16 strings.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_chain):
* gst-libs/gst/tag/gstid3demux.c: (gst_id3demux_chain):
Don't attempt typefinding on too-short buffers that have been
completely trimmed away.
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v2_tag):
Improve the debug output
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c:
(parse_relative_volume_adjustment_two):
We only care about gain and peak data for the master volume.
Original commit message from CVS:
* configure.ac:
Bump -base requirement to 0.10.5 for gst_tag_from_id3_user_tag(),
used by id3demux.
* gst-libs/gst/tag/gstid3demux.c: (plugin_init):
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_user_text_identification_frame),
(parse_unique_file_identifier):
Add support for UFID and TXXX frames and extract musicbrainz tags.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
* gst-libs/gst/tag/id3v2frames.c: (id3v2_genre_fields_to_taglist):
Handle 0 data size in otherwise valid frames.
Handle numeric strings in 2.4.0 even when not in parentheses
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
ID3 2.3.0 used synch-safe integers for the tag size, but not for the
frame size. (Fixes#331368)
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_insert_string_field),
(parse_split_strings):
Add more validation to ensure that a char encoding conversion
produced a valid UTF-8 string.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_split_strings):
Adjust for data length indicators when parsing (Fixes#329810)
Fix stupid bug parsing UTF-8 tag text.
Output tag strings with multiple fields as multiple tags, so the
app gets all the data.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_text_identification_frame),
(id3v2_tag_to_taglist), (id3v2_genre_string_to_taglist),
(id3v2_genre_fields_to_taglist):
Never output a tag with a null contents string.
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c: (gst_id3demux_chain),
(gst_id3demux_read_id3v1), (gst_id3demux_sink_activate),
(gst_id3demux_send_tag_event):
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v1_tag):
Someone should kick my butt. Remove ID3v1 tags from the end of the
file.
Improve error messages. Send the TAG message as soon as we complete
typefinding, instead of waiting until we send the first buffer.
Downstream tag event is still sent before the first buffer.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Never trust ANY information encoded in a media file, especially
when it's giving you sizes. (Fixes#328452)
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
Remove errant break statement, and fix compilation with
older GCC.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v2_tag):
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame), (parse_text_identification_frame),
(id3v2_tag_to_taglist), (id3v2_are_digits),
(id3v2_genre_string_to_taglist), (id3v2_genre_fields_to_taglist),
(parse_split_strings), (free_tag_strings):
Rewrite parsing of text tags to handle multiple NULL terminated
strings. Parse numeric genre strings and ID3v2 type
"(3)(6)Alternative" style genre strings.
Parse dates that are only YYYY or YYYY-mm format.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Fix compilation of id3demux when zlib is not present.
(Fixes#326602; patch by: Sergey Scobich)
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c: (gst_id3demux_add_srcpad):
Add gst_element_no_more_pads() for proper decodebin behaviour.
* gst-libs/gst/tag/id3v2frames.c: (parse_comment_frame),
(parse_text_identification_frame), (parse_split_strings):
Failure to decode some tags is not a GST_ERROR() but a
GST_WARNING()
When iterating over a chunk of text, check that we haven't gone too
far.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_read_id3v2_tag):
If a broken tag has 0 bytes payload, at least still skip
the 10 byte header
No point building these by default. Also, these generated files
should go into the srcdir, not the builddir in this case, since
they're version controlled.
Add (uninstalled) tool to create licenses-table.dat from liblicense's
RDF files. It's not very pretty and makes loats of assumptions about
the input, but should work. If things change, we can fix it then.
https://bugzilla.gnome.org/show_bug.cgi?id=646868
What GStreamer calls encoder ("encoder used to encode this stream") is
stored in the vendor string in Vorbis/Theora/Kate and possibly others.
The Vorbis comment packet used in those streams uses ENCODER as the name
of the encoding program, which GStreamer calls application-name.
https://bugzilla.gnome.org/show_bug.cgi?id=656034