This reverts commit 893e4ed0dd.
This caused regressions in existing elements which override/set things
like QoS and such in their own init functions. If the base class does
this in ::constructed() now it will override the subclass settings
again with its own, which can have unintended side-effects.
Case in point is gdkpixbufsink which disabled QoS there, and this
patch would reliably make the unit test fail in valgrind because
now frames are dropped because of QoS (when QoS should really be
disabled).
Fixes#2794
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5006>
When gst_element_set_state is called in _setup_locked and errors, the
callback is already processed before we reach handle_current_async, and
the timer is started even though it's finished processing, which results
in a NULL pointer crash later in async_timeout_cb.
To fix this, we check that it's still processing before calling
handle_current_async.
Fixes#1683
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4936>
Fixes test: validate.uridecodebin.expose_raw_pad_caps
testsrcbin (currently part of debugutilsbad) is an useful element for
validate tests.
validate.uridecodebin.expose_raw_pad_caps makes use of it.
Unfortunately, because validate tests with GStreamer only run with
whitelisted plugins and `debugutilsbad` wasn't in the whitelist, the
test was failing and being auto-skipped.
This patch adds debugutilsbad to the whitelists used by validate tests
in subprojects with a validate/meson.build.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4931>
This will cause an integer overflow a little bit further down because we
allocate a bit more memory to allow for a NUL-terminator.
The caller should've avoided passing that much data in already as it's
not going to be a valid image and there's likely not even that much data
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4894>
This is a small optimization and avoids restarting the next parsing
iteration on already accepted data.
On its own it would also fix ZDI-CAN-20968 (see previous commit) but the
previous commit independently is also a valid fix for it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4895>
Add support for generation of 10/12/14/16 bit bayer test pattern.
The implementation is rather simplistic, just take the ARGB
input, generate 16-bit data out of it instead of 8-bit, shift
them as required by the output bitness, and apply endian swap.
Example usage:
```
$ gst-launch-1.0 videotestsrc ! \
video/x-bayer,width=512,height=512,format=bggr12le ! \
bayer2rgb ! \
video/x-raw,format=RGBA64_LE ! \
videoconvert ! \
autovideosink
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4686>
glfilter will unref input buffer after _transform() call immidiately,
but gpu may still reading input buffer for rendering because gl
api is executed async. Need hold reference for input buffer by
adding parent meta to output buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4801>
Appsink will unref prev sample in dispose function. Which is later
when V4L2 video decoder link with appsink as V4L2 video decoder
will close V4L2 device fd during GST_STATE_CHANGE_READY_TO_NULL.
If the video buffer return to V4L2 video decoder after the decoder
closed V4L2 device fd, V4L2 can't release the video frame buffer
which allocated with MMAP mode as application can't call
VIDIOC_REQBUFS 0 to release the video frame buffer by V4L2 driver.
The memory of the video frame will leak.
Unref the gstbuffer in stop() function, so V4L2 video decoder
can received all video frame buffers and release it before close
V4L2 device fd.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4818>
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
filter the error message and don't forward it as there might be a
following candidate decoder that can be used.
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
store the latency message and handle it after decoder is accepted.
This is to avoid the selection lock failure if decodebin3 needs to
handle latency message for candidate decoders when sending sticky event.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Send sticky events to the new created decoder after it switches
to PAUSED state. It it fails, just skip this decoder and try the
next one until finding one that works. Otherwise remove this
failing stream after trying all decoders and no one can work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3856>
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.
Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4749>
Allow a project to use gstreamer-full as a static library
and link to create a binary without dependencies.
Introduce the option 'gst-full-target-type' to
select the build type, dynamic(default) or static.
In gstreamer-full/static build configuration gstreamer (gst.c)
needs the symbol gst_init_static_plugins which is defined
in gstreamer-full.
All the tests and examples are linking with gstreamer but the
symbol gst_init_static_plugins is only defined in the gstreamer-full
library. gstreamer-full can not be built first as it needs to know what plugins
will be built.
One option would be to build all the examples and tests after
gstreamer-full as the tools.
Disable tools build in subprojects too as it will be built at the end of
build process.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
This patch adds gst_egl_image_from_dmabuf_direct_target_with_dma_drm() and
add gst_egl_image_from_dmabuf_with_dma_drm() functions
New function gst_egl_image_from_dmabuf_direct_target_with_dma_drm(), where
gst_egl_image_from_dmabuf_direct_target() is a specialization of the first.
And gst_egl_image_from_dmabuf() is a specialization of new function
gst_egl_image_from_dmabuf_with_dma_drm()
Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
It internally uses gst_gl_context_egl_get_dma_formats() instead of fetching
modifiers by itself.
Thus gst_egl_image_check_dmabuf_direct() is a decorator of this new function.
Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
By calling the internal function gst_gl_context_egl_fetch_dma_formats() the an
array of structures holding a DMA fourcc format and its modifiers (another array of
structure holing modifier and if it's external only) will be stored.
Users would call gst_gl_context_egl_get_format_modifiers() to get the array of
modifiers of a specific DMA fourcc format.
Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
While decodebin3 could handle changes in inputs (ex: changing codecs), there was
still one limitation which was when changing between sources which had
non-intersecting stream types (ex: switching from a video-only source to a
audio-only source). While the decoder *could* change to the proper codec ... it
would carry on using a `DecodebinOutputStream` associated to that stream
type (and therefore with pads with the wrong name).
In order to handle this:
* We notify the `MultiQueueSlot` of the change in `GstStreamType` if it already
had an associated inputstream (ex: the one associated with the static sink
pad)
* We detect such changes on the output of multiqueue as soon as
possible (i.e. when we get the GST_EVENT_STREAM_START for the new stream type)
by discarding the associated output.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1669
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4703>
When the alignment contains nothing, all its fields are 0 and always
can be satisfied. So there is no need to validate it in this case.
And there are a lot of places just setting this alignment to default
all zero value, this validation generates lots of warnings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4674>
Add d3d11 conversion path to make gst_video_convert_sample() work
for GstD3D11Memory.
Note that just adding "d3d11download" to the exisitng code is
suboptimal from GstD3D11 point of view because:
* d3d11convert element can support crop/colorspace-conversion/scale
all at once while existing software pipeline needs intermediate steps
for the conversion
* "Process everything on GPU then download it to CPU memory" would be likely
faster than "download GPU memory to CPU then processing it on CPU"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2715>
Subclasses may want to override the pad template with different formats
or with a different pad subclass.
The original beahviour is still available by calling
gst_gl_mixer_class_add_rgba_pad_templates() in _class_init() of the
subclass.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
When reconfigure_output_stream entry missing decoder path,
requested_selection should been update with what is really
active/selected immdiately with SELECTION_LOCK hold. So
use an optional message return from reconfigure_output_stream
and post it after release SELECTION_LOCK. This can make sure
other thread call to check_slot_reconfiguration will got
a correct requested_selection.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4599>
If gst_buffer_pool_set_config() fails then the pool will use its old
config. This may include different width or height when
pic_width/pic_height != frame_width/frame_height.
As a result, the assertions in theora_handle_image() will fail.
So check the result of gst_buffer_pool_set_config() and only use the pool
if it succeeds. Otherwise let the parrent decide_allocation() create a new
pool.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
If the buffer has no video meta then the meta is created from the local
data. In this case, the other asserts don't actually check anything. So add
another one to ensure that the buffer is actually large enough.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
Upon creating a window, glimagesink and osxvideosink now set the policy to
NSApplicationActivationPolicyRegular, which lets us show an icon in the Dock
for convenience and appear in the top menu bar like other apps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4573>
This is no longer needed since the introduction of `gst_macos_main()` in 1.22.
Before that existed, we had a patch for GLib in Cerbero, which did work but made it
impossible to update GLib at all. The code being removed was a fail-safe in case of
running without said patch being applied. It's no longer needed, since for macOS
we just wrap our GStreamer with an NSApplication using `gst_macos_main()`.
Warnings will be displayed if no NSApp/NSRunLoop is found wherever needed,
pointing the user towards using the new API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4366>
Proxy the force-live and min-upstream-latency propertyies to the internal
glvideomixerelement at construction time. force-live has to be set
during construction of the glvideomixerelement, so that has to be
deferred until the _constructed() call. Make sure that all other
existing proxied properties will still get set once the element
is created.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4494>
decodebin3 will do its best to figure out whether a parsebin is required to
process the incoming stream.
The problem is that for push-based stream it could happen that the stream would
not provide any caps, resulting in nothing being linked internally.
Furthermore, there is the possibility that a stream *with* caps would not be
using a TIME segment, which is required for multiqueue to properly work.
In order to fix those two issues, we force the usage of parsebin on push-based
streams:
* When the pad is linked, if upstream can't provide any caps
* When we get a non-TIME segment
Fixes#2521
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4492>
The proxy and queue are created in the gst_gl_window_wayland_egl_open()
function and will be recreated on open. This leaks both objects, the
wayland client documentation mentions that they should be destroyed
using the appropriate destroy functions.
Found during valgrind memory leak testing, these blocks were marked as
definitely lost.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4354>
The first serialized events that can be send on a src pad are a CAPS and then a
SEGMENT event.
When handling events from user in appsrc, we used to send a segment
automatically if the SEGMENT has not been sent yet.
This breaks if the CAPS event was not send either as we were now sending
a SEGMENT before the CAPS.
Fix this by delaying such events until the CAPS has been configured.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
Existing codes rely on modified argc value by g_option_context_parse()
but g_option_context_parse_strv() is used in case of Windows.
Count arguments after the option parsing manually.
Fixing command "gst-inspect-1.0.exe -b"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4313>
Moving from PLAYING to NULL will set the stop_streaming_threads to TRUE,
but when moving back upwards its not reset to FALSE (as only done in
uncalled init and resume callbacks).
Fix by reseting value in the prepare callback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4309>
Adding propose_allocation is to meet the requirement of Application to
request buffers. Application sometimes need to create buffer pool
and request buffers to maintain buffer management itself, and Gstreamer plugin
import Application's buffers to use. So, add propose_allocation in
appsink like waylandsink and kmssink etc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4185>
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):
ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’
which we get with newer GLib versions. These were all harmless.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4273>
This is a follow-up of the previous commit that enabled support for redirection.
The problem is that the urisourcebin that emitted the error redirection never
produced any pads, and therefore was never linked to decodebin3. This resulted
in the code waiting for that (output) item to finally switch over ... which will
never happen.
The fix is done by removing it early if it was never connected to decodebin3.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4252>
The goal of parsebin is to figure out which elements to link together in order
to provide elementary streams given any random input.
The problem is that deciding whether a given stream should still have more
elements plugged in or not was dependent on ... the presence of compatible
decoders (sic).
Instead of that, if we can't plug anymore elements on a given stream *and* it is
detected as being an elementary stream, expose it.
Fixes#2118
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4231>
If sticky events are present on parsebin source pads, we propagate them to the
multiqueue source pads. Those will be propagated on the new urisourcebin source
pads like in the other code paths.
This ensures that STREAM_START event are present on new source pads. If CAPS
event are also present (not guaranteed), they will also be available.
Fixes#2384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4203>
In gst_video_info_dma_drm_to_caps() the caps are newly created, so there's no
need for make it writable. In gst_video_info_dma_drm_from_caps() a copy of the
caps is done, which implies a gst_caps_make_writable().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4195>
This allow allocating memory from any DRM driver that supports this
method. It additionally allow exporting DMABuf. This allocator depends
on libdrm and will be stubbed if the dependency is missing. This is derived
from kmssink dumb allocator.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
Read and flush console buffer from the console thread immediately,
instead of main thread. Otherwise (if main thread is busy)
the console thread will keep adding idle source and then main thread
will be unresponsive.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4067>
These parameters are not actually `out` parameters but must
be allocated and zero-initialized by the calling function.
Marking them as `out caller-allocates` will cause memory
corruptions when calling these APIs from e.g., Python code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4051>
This crept in several years ago sadly :(
The usage of accurate seeking should be reserved to use-cases where it is
essential that we seek to that position. This should not be the default.
There is a new option `--acurate-seeks/-a` to be able to force that.
Furthermore, if accurate seeks aren't required, a player should be using the
GST_SEEK_FLAG_KEY_UNIT flag to seek to the closest keyframe and provide the most
reactive experience.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3926>
Generating the source element is done when uridecodebin is doing the
READY to PAUSED state change, so it is reasonable to set the new source
element to that state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3857>
Do not store cached EGL images in GstMemory QData. Instead, use a
per-DmabufUpload GHashTable to store cache entries with a weak
reference to the GstMemory.
This allows two glupload elements on separate tee branches to have
their own EGL image cache. For this pipeline:
gst-launch-1.0 v4l2src ! tee name=t \
t. ! queue ! glupload ! fakesink
t. ! queue ! glupload ! fakesink
this gets rid of the occasional critical error message:
GStreamer-CRITICAL **: 08:26:33.194: gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3880>
With the addition of the 'keep-aspect-ratio' sizing policy, content
that doesn't fit the target size is downscaled according to its own
aspect ratio to fit that target size, and centered.
Centering might not always be the desired behaviour, however;
consumers of this API might want to align the resulting picture to
the left or to the right.
To account for any of these cases, add two new properties to the
glvideomixer pad: xalign, and yalign. They operate on normalized
coordinates (0.0 for start, 1.0 for end), and default to 0.5 which
centers content.
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
The sizing policy allows selecting between the current behavior,
which deforms the texture to fill the width and height of the
pad; and a new 'keep-aspect-ratio' sizing policy, which fits the
texture within the rectangle respecting its original aspect ratio.
The reason for this is that this allows avoiding extra elements
in the pipeline, and reduces the number of buffer passing through
the pipeline.
Most of this code is a direct port of the sizing policy handling
of the compositor element, except it is adapted to operate on GL
texture coordinates through the projection matrix.
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
If we have caps then we can only set exactly those caps, if we have no
caps yet then negotiating anything is not very meaningful because the
caps are defined by the application and not downstream.
Avoids, among other things, an unnecessary allocation query and spurious
useless caps being set before the first buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3757>
Handling mouse navigation events in glvideomixer element, if no
pixel-aspect-ratio info in the caps, an assertion error is produced
inside gst_util_fraction_multiply because default denominator is zero.
Error fixed:
```
(gst-launch-1.0:102654): GStreamer-CRITICAL **: 00:47:51.598: gst_util_fraction_multiply: assertion 'b_d != 0' failed
```
Simple pipeline to reproduce the issue:
```
gst-launch-1.0 -v glvideomixer name=mix ! glimagesinkelement gltestsrc ! mix.sink_0
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3766>
We create a new context in `gst_gl_context_create_thread()` and then
activate it on the current thread. Thereafter we assume that the
current thread continues to be the active thread for that context and
call `gst_gl_context_fill_info()` which asserts that the current
thread is the active thread.
However, if at the same time a different thread calls
`send_message_async()`, it will call into
`gst_gl_window_cocoa_send_message_async()` which will schedule the
message to be invoked using GCD. That anonymous function will also
call `gst_gl_context_activate()`, which creates a race, which can lead
to:
```
gst_gl_context_fill_info: assertion 'context->priv->active_thread == g_thread_self ()' failed
```
Fix it by using `gst_gl_context_thread_add()` to invoke `fill_info()`
on the context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3732>
The goal of the "global" group-id is to fix new inputs that do not come from the
same "source" as others. In order to ensure all "current" streams have the same
group-id we distribute the first valid group-id to all streams.
This commit fixes two issues with that:
* When inputs are unlinked they weren't always properly resetted (it would only
work if parsebin is used, which is no longer the default in
uridecodebin3/playbin3).
* When computing the global group-id, take into account unset
group-id (i.e. GST_GROUP_ID_INVALID).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1698
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3712>
As the path to the gir file is passed to hotdoc.generate_doc() and
not the build target itself, meson doesn't know about the dependency.
In turn, as the CI doesn't build everything before building the
documentation target, some gir files might not exist, for instance
in the case of gst-rtsp-server, causing the output documentation to
be empty.
The error occurred silently because hotdoc accepts wildcards for
*-sources arguments, thus it won't warn about a missing gir file as
it is legitimate for glob matching to resolve to nothing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3686>
It might be possible to fulfill those but not with the first caps
structure. Instead of just fixating the first caps structure, check if
the preference can be fulfilled by any of the structures as the first
step.
Without this the following pipeline negotiates to mono after the
decoder because opusenc only has a single channel in its first caps
structure.
gst-launch-1.0 audiotestsrc ! audio/x-raw,channels=2 ! opusenc \
! queue ! opusdec ! queue ! opusenc ! fakesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3689>
This should fix pipelines such as this one to work as expected
... ! opusenc ! capsfilter caps='audio/x-opus,
channels=1; audio/x-opus, channels=2' ! ...
The expectation is that the encoder will propose the first structure
before the second one to the source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3673>
The number of expected pads was:
* Defaulting to 1
* Or being overriden by GST_MESSAGE_STREAMS_SELECTED
This fails if upstream isn't a selectable source and has multiple streams, and
would therefore cause failures with multi-stream gapless playback
Fixes#1672
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
It is quite possible to have the blocking probe called from different streaming
threads when all expected pads are present.
* Notify all waiters by using g_cond_broadcast instead of g_cond_signal
* Properly remove the probe after waiting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
Using the "GstBin" flags to check if an adaptive demuxer is streams-aware isn't
a good idea since it prevents using elements which aren't bins.
Instead we see if a collection was posted by the demuxer by the time a pad is
added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3601>
We want to make it so that we prefer a higher, not lower, number of
channels. Otherwise, this pipeline would convert from 2 to 1 channels:
gst-launch-1.0 audiotestsrc ! audio/x-raw,channels=2 ! opusenc ! queue ! opusdec ! queue ! opusenc ! fakesink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3494>
Whenever the surface is resized before the stream is negotiated, we endup
with an assertion in libgstvideo.
gst_video_center_rect: assertion 'src->h != 0' failed
This fixes it, by following the style aready in place, which is to ensure
surfaces have a minimum size of 1x1.
Fixes#1139
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3467>
gst-launch-1.0 audiotestsrc ! udpsink host=127.0.0.1
gst-launch-1.0 udpsrc ! audioconvert ! autoaudiosink
would crash with a floating point exception when clipping the input
buffer owing to a division by zero because no caps event was received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3469>
Make sure that group-id of a given play item are made consistent from the
start (sources) and all the way through the output.
This ensures that we can reliably detect that we have switched to the next play
item on the output of decodebin3 (and we can therefore properly free/release it)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When shutting down, we want to remove the urisourcebin blocking probes ... but
we also want to propagate a GST_FLOW_FLUSHING upstream (and not
GST_FLOW_NOT_LINKED) to make the upstream task gracefully stop instead of
posting an error message.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
When `is_selection_done` is called, it checks that all the requested streams are
present in the active stream list ...
... except there could very well be a (about to be removed) stream from the
previous selection present.
Therefore filter the list of streams we add to the message by the streams which
are actually requested.
Fixes issues when switching between different stream types (ex: video-only to
audio-only).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
Currently, when rtspsrc property add-reference-timestamp-metadata=true,
a downstream rtph264depay element will attach multiple copies of the
same GstReferenceTimestampMeta to the depayloaded media buffers. This
can have signficant performance impacts further downstream in a pipeline
like the following:
rtspsrc add-reference-timestamp-metadata=true ! rtph264depay ! h264parse ! ... ! rtph264pay ! ...
For example, if there are 10 packet buffers for a frame of RTP H.264
video, each of those packet buffers will contain the same reference
timestamp meta. The rtph264depay element will then attach all 10
metadata to the depayloaded frame. And then later when we payload the
frame buffer again for proxying, we now have 10 more buffers each with
10 instance of the same metadata. Allocating/deallocating 100+ instances
of metadata @ 30fps for multiple streams has a pretty large performance
impact.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1578
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3431>
The tile width in pixel is not always available. Notably for
8L128 10bit format, the tile is 8x128 bytes, and the pixel
format is fully packed. That means that the tile contains at
least 6 pixels per line, but it also hold some bits of the
pixel from the same line on the previous or next tile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
In current tile representation, only tiles with power of two
width and height in bytes are supported. This limitation
prevents adding more complex tiles formats.
In this patch, we deprecate tile_ws and tile_hs from GstVideoFormatInfo and
replace if with an array of GstVideoTileInfo. Each plane tiles are then
described with their pixels width/height, line stride and total size.
The helper gst_video_format_info_get_tile_sizes() that depends on the
deprecated API is also being removed. This can simply be removed as it wasn't
in any stable release yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
Setting force_live lets aggregator behave as if it had at least one of
its sinks connected to a live source, which should let us get rid of the
fake live test source hack that is probably present in dozens of
applications by now.
+ Expose API for subclasses to set and get force_live
+ Expose force-live properties in GstVideoAggregator and GstAudioAggregator
+ Adds a simple test
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3008>
This was the intention from the start, just took me a few years *cough* to
actually implement it properly.
Gapless is handled by re-using as much as possible the same decoders and sinks
if present, and only pre-rolling switching at the sources level (with buffering
if/when needed).
In order to enable "gapless" playback, the "next" uri should be set at any time
between the moment the `about-to-finish` signal is emitted and the moment the
current play item is done. Previously this could only be done with the signal
emission.
This new implementation also allows "Instantaneous URI switching". This allows a
much faster way of switching playback entries while re-using as many elements as
possible. To enable this set `instant-uri` property to TRUE, the default being
FALSE.
API: instant-uri properties
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
DecodebinInput (and their backing parsebin or identity) are no longer released
when the corresponding sinkpad is unlinked, but when it's released.
The parsebin element will be resetted:
* If incoming caps are incompatible (was the case before)
* Or when unlinking and it was previously pull-based
This opens the way to use decodebin3 with changing inputs (i.e. gapless)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
Introduce the option to have the streams be parsed with `parsebin` for
compatible sources (i.e. which are eligible for buffering in the same way as
before this commit).
By parsing the inputs directly, this allows more accurate buffering control:
* Instead of relying on potential bitrate information coming from somewhere
* and *without* being linked downstream
If `parse-streams` is activated and the stream is eligible for buffering, then a
`multiqueue` will be used on the output of `parsebin` in order to handle the
buffering.
API: `parse-streams`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
