Just like for the seconds field, there are no limitations on the hours and
minutes fields. The specification for xml schema duration fields doesn't forbid
specifying durations with only (huge) minutes or hours values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2951>
When picking an available payload type, we need to pick one that is
available across all media.
The previous code, when multiple media were present, looked at the first one,
noticed it had pt 96 as the media pt, then simply looked at the next media,
noticed it didn't, and decided 96 was available.
Instead, check if the pt is used by any of the media, if it is, decide
it is not available and go to the next pt. I'm fairly sure that was the
original intent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2984>
When updating a manifest during live playback, preserve the current
representation for each stream.
During update_fragment_info, if the current representation changed
because it couldn't be matched, trigger a caps change and new
header download.
This reverts commit e0e1db212f
and reapplies "dashdemux: Fix issue when manifest update sets slow start
without passing necessary header & caps changes downstream" with
changes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2920>
Timers for RTX packets are dealt with later in update_rtx_timers(), and
timers for non-RTX packets would potentially also be unscheduled a
second time from there so avoid that.
Also don't shadow the timer variable from the outer scope but instead
make use of it directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
Check back pressure of a stream transport before popping buffer from its backlog.
If the stream transport is not experiencing back pressure, the buffer can be popped from backlog and pushed to client.
Fixes:#1298
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2936>
The address/port is pre-defined by the caller of the function, so
retrying is only going to loop forever.
Ideally the multicast address should be checked after allocating but
this doesn't happen currently, so it's better to error out cleanly then
to loop forever trying the same address.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2975>
This avoids getting in a bunch of corner cases. We'd have to insert
a "rejected" line from the start as a place-holder to get around this,
but the rest of the code just becomes more complicated, so just
disallow it for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2439>
If the buffer is not msdk_buffer, we can try to directly import the
attached memory (i.e. va mem and dmabuf mem) by applying the common
uitl function: import_to_msdk_function ().
Here add a flag "from_qdata" in GstMsdkSurface to handle the cropping case,
we should avoid updating the crop values when msdk_surface is from the
memory's qdata, because the crop info from this surface is the already
updated one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
When input buffer is of dmabuf memory but not a msdk buffer (i.e., the
allocator is not msdk_allocator), then we can try to get fd of this mem,
create the corresponding va surface and wrap it as mfx surface.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2498>
If read_one or write_one was called but the stream closed before it could
read/write a whole packet, read_one/write_one would hang indefinitely,
consuming 100% CPU. This commit fixes that by treating a short read/write
as an error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2964>
We were checking possible bind flags for the DXGI format
of the source texture but that's never applied to
the destination texture desc.
Just use the already configured bind (and misc) flags of source texture
for the destination texture allocation without additional check.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2950>
Setting the content-type property shall override internally detected MIME
types, to make it possible to do as following example (where audio/basic to be
used prior to audio/x-mulaw):
gst-launch-1.0 ... ! mulawenc ! audio/x-mulaw,rate=8000,channels=1 !
curlhttpsink location=<url> content-type=audio/basic
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2732>
* Private header name is changed to gstd3d11-private.h to follow
naming convention
* Add Since mark everywhere
* Update member variable names to be consistent with the other
object implementations in this library
* Correct outdated documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2945>
Theoretically having elements in locked state should not have any effect
at all when the surrounding bin is doing state changes. However
previously a state change error of a locked element would cause the
bin's state change to also fail, which is clearly not intended.
State change failures of locked elements are to be handled by whoever
set the element to locked state. By always returning them here it is
impossible for the owner of the element to handle state change failures
gracefully without potentially affecting the whole pipeline's state
changes.
Non-failure returns are still returned as-is as the distinction between
ASYNC/NO_PREROLL/SUCCESS has big consequences on the state changes of
the bin and overall pipeline. Theoretically SUCCESS should also be
returned in all cases but I can't estimate the effects this would have
on the overall pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2932>
Current default G_MAXINT is not a correct value under any circumstances.
This creates an issue with screen capture, during which we currently do
not get any framerate info causing G_MAXINT to show up, where elements
downstream can possibly misbehave - for example, `vtenc` causes
a kernel panic.
Replace with 30/1 to avoid such scenarios.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2944>
The current handle_frame() does not return the real error that happens
in decode_scan and decode_frame, which makes the pipeline continue with
the error and may trigger asserting later.
We also return the error when decode_quant_table or decode_huffman_table
fails.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2938>
Add an example to show the usage of present singal.
In this example, a text overlay with alpha blended background
will be rendered on swapchain's backbuffer by using
Direct3D11, Direct2D, and DirectWrite APIs.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2923>
The "present" signal will be emitted just before the
IDXGISwapChain::Present() call. The client can perform additional
GPU operation with given GstD3D11Device object and
ID3D11RenderTargetView handle. Or, the client can read back
the scene to be displayed on window using the signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2923>
libsoup 3.0.x dispatches using a single source attached when the session
is created, so we need to create the session with the same context that
our download thread is later using.
2.74 or 3.1 will dispatch a response using the context which sent the
request. However, for any context other than the one that created the
session, this will also create and destroy sources, so there's still
some slight performance benefit.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2913>
This allows an application to provide their own opened DRM device
fd handle to kmssink. For example, an application can lease
multiple fd's from a DRM master to display on different CRTC
outputs at the same time with multiple kmssink instances.
Specifying the fd property is not allowed when driver-name
and/or bus-id properties are specified.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2807>
Handle select-streams and seek events in an element
level send_event() vfunc, so they can be received
before any source pads are created.
This allows preferred streams to be selected before
segment downloading starts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2912>
Nouveau driver currently only exposes postproc entry. But
vaapidecodebin is registered independent if there are decoders or not,
exposing a segmentation fault.
This patch removes the encoder/decoder/codec arrays if no entries are
found, and if no decoders are found vaapidecodebin is not
registered. Also for vaapipostproc if no postproc entry is found.
Also, if general decoder, used by vaapidecodebin, doesn't have a sink
pad string, don't register the glib type.
Fixes: #1349
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2865>
Without this change cleanup function for g_autoptr is not defined for
GstPlayMediaInfo, GstPlaySignalAdapter, GstPlayVideoRenderer,
GstPlayVideoOverlayVideoRenderer and GstPlayVisualization. Cleanup
function was defined in gstplay.h, but missing in other header files.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2888>
When stopping the element, make sure the pad task
is stopped before destroying the part readers.
Closes a race where the pad task might access
a freed pointer.
Also add a guard against this sort of thing
by holding a ref to the reader in the pad loop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2901>
When playing live, it's possible that one stream reaches
the end of the available playback window and goes to sleep
waiting for a manifest update, and the manifest update
introduces a new period. In that case, the sleeping
stream needs to wake up and go 'properly' EOS before we
can advance the input to the new period.
Accordingly, make sure that a stream's last_ret value
is not marked as EOS if it's just sleeping waiting for a live
manifest update.
Also fix the output loop to go back and re-check if it's
time to switch to the next period after dequeuing and
discarding an EOS event.
https://livesim.dashif.org/livesim/periods_20/testpic_2s/Manifest.mpd
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2895>
The parent refcount is of the *transformed* buffer, not the input
buffer.
Also update the docs to clarify that @transbuf is the transformed
buffer, and not the buffer on which a transformation is being
performed.
Due to this bug, modifying the structure of a meta that has been
copied to another buffer fails with:
gst_structure_set: assertion 'IS_MUTABLE (structure) || field == NULL' failed
Add a test for the same.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2890>
Newer compilers ( clang 15 ) have turned stricter and errors out instead
of warning on implicit function declations
Fixes
gstssaparse.c:297:12: error: call to undeclared library function 'isspace' with type 'int (int)'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
while (isspace(*t))
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2879>
Ideally new() functions should simply call g_object_new() and not much
else, so let's do that here and handle all the construction properly in
a GObject way.
Now a play object created via g_object_new() is actually usable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2880>
Ideally new() functions should simply call g_object_new() and not much
else, so let's do that here and handle all the construction properly in
a GObject way.
Now a player object created via g_object_new() is actually usable.
In addition, also fix the video-renderer property so that reading it
returns an object of the correct type.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2880>
That is, get rid of unnecessary and wrong special-casing.
This could always use gst_rtsp_url_get_request_uri_with_control() but as
we only have the control base URI as string it is easier to just call
gst_uri_join_strings().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2868>
This was showing up as a memory leak in GTK's
gstreamer media backend:
40 bytes in 1 blocks are definitely lost in loss record 18,487 of 40,868
at 0x484586F: malloc (vg_replace_malloc.c:381)
by 0x50D5278: g_malloc (gmem.c:125)
by 0x50EDBA5: g_slice_alloc (gslice.c:1072)
by 0x50EFBCC: g_slice_alloc0 (gslice.c:1098)
by 0x51F2F45: g_type_create_instance (gtype.c:1911)
by 0x51DAE37: g_object_new_internal (gobject.c:2011)
by 0x51DC080: g_object_new_with_properties (gobject.c:2181)
by 0x51DCB20: g_object_new (gobject.c:1821)
by 0x9855F86: UnknownInlinedFun (gstplayer-wrapped-video-renderer.c:109)
by 0x9855F86: gst_player_new (gstplayer.c:579)
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1374
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2875>
Otherwise we won't send the protection packets for the last few
packets when a stream ends.
Also send EOS on the FEC src row pad immediately, and on the FEC src
column pad after draining is complete. This makes it so that the FEC
src pads on rtpbin behave the same way as the RTCP src pads on rtpbin
when EOS is received on the send_rtp_sink pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2863>
When a new segment event arrives, it immediately updates
the current stored segment, which was used for calculating
the running time of the current text buffer for every
passing video frame. This means a segment that arrives
after the text buffer might get used to (mis)calculate
the running times subsequently.
Instead, calculate and store the right running time
using the current segment when storing the buffer. Later
the stored segment can get freely updated.
This fixes the case where pieces of video and text streams
are seamlessly concatenated and fed through the text overlay.
Previously, it could lead to the current text buffer suddenly
have a massive running time and blocking all further input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2802>
Radeon mesa gallium driver has a bug which adds P010_10LE sink caps
format. This patch removes formats which arent 420 chroma.
gst_caps_set_format_array() wasn't used because the fix traverse
several structures with potential different formats.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2844>
When returning GST_ADAPTIVE_DEMUX_FLOW_RESTART_FRAGMENT
for the first segment data, we might need to requeue the
header.
This was leading to occasional prerolling stalls on
HLS live streams with renditions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2849>
Make sure gst_adaptive_demux_loop_cancel_call()
never tries to operate on an invalidated main context. Make
sure to clear the main context pointer while holding the lock,
and to check it in gst_adaptive_demux_loop_cancel_call()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2847>
GLib's GRecMutex will allocate another heap memory for CRITICAL_SECTION
struct and g_rec_mutex_lock/g_rec_mutex_unlock use WIN32 APIs actually.
We don't need such intermediate function calls and redundant heap allocation.
Just call WIN32 APIs directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2845>
Media playlist updates and fragment downloads happen in an interleaved
fashion. When a media playlist update fails *while* a segment is being
downloaded, this means we lost synchronization.
Properly propagate and handle this
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
There is now only a single case where we setup the initial playlist to 0, which
is for the very first variant stream.
Rendition streams will have the initial playlist "synchronized" against the
variant stream media playlist.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
Loss of synchronization happens when the updated media playlist has no
relationship to the previous ones. This could happen because of network issues,
server issues, etc...
When this happens, we take no chance and "reset" ourselves so that we can "seek
back to live" against the new updated playlists.
Since this happens at the "media playlist update" level, make sure the custom
flow return is propagated up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
We are already in the main scheduler thread, therefore we can do the "seek back
to live" directly. This also avoids other pending actions to take place.
Also handle the loss of sync when doing manifest updates.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
Close some race conditions in switching to the next period,
by ensuring the tracks are completely drained first and by
not outputting EOS events to the output source pad
if there is another period pending.
Fixes Manifest_MultiPeriod_1080p.mpd some more.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
Before sending EOS, update the period's has_next_period
flag and/or create the next period. This closes a race
where the output loop might receive the EOS event
and either push it downstream (causing premature EOS),
or receive it and try and switch to the next period
before that period is completely set up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
When combining stream flows, ignore streams that
are not selected, instead of checking whether
the stream state has changed yet.
Fixes another issue with dashdemux2 where it fails to
change to the next period when playing content with
several video, audio and text streams, as with
Manifest_MultiPeriod_1080p.mpd when seeking to 730
just before the end of the first period.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
The is_gst_mini_object_check would sometimes detect a proper GObject
as a mini object, and then bad things happen.
We know whether a pointer is a proper GObject or a MiniObject here
though, so just pass that information to the right code paths and
avoid the heuristics altogether.
Eliminates all remaining uses of object_is_gst_mini_object().
Fixes#1334
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2832>
The is_gst_mini_object_check would sometimes detect a proper GObject
as a mini object, and then bad things happen.
We know whether a pointer is a proper GObject or a MiniObject here
though, so just pass that information to the right code paths and
avoid the heuristics altogether.
There are probably more cases where the check should be eliminated.
Fixes#1334, maybe
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2832>
This is based on gtksink, but similar to waylandsink uses Wayland APIs
directly instead of rendering with Gtk/Cairo primitives.
Note that the long term plan is to move this into the existing extension
in `-good`, which requires the Wayland library to move the as well.
For this reason several files like `gstgtkutils.*` and `gtkgstbasewidget.*`
are straight copies and should be kept in sync.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1515>
This can be important for instance when a container holds multiple
tracks with the same media type, with no indication (eg tags) of
which track is the default one.
In that case, players usually pick the first track by default.
This is especially useful when using smart editing with GES, as
it will result in the same ordering as the input file that was
used as a template.
For reference, this yields the same order as ffprobe.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
The previous code was storing container children in reverse
addition order, this was mitigated by the fact that track elements
were also stored in reverse order, thus restoring the original
order, but it seems more consistent to preserve order throughout,
the extra cost of append operations is negligible.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
when creating a profile from a discoverer info.
There is no justification for the existing code, and talking with
Thibault he cannot remember why the sort was in place.
On the other hand, this allows GES users to not have to implement
a callback for the select-tracks-for-object callback when using
it to trim a single clip, which the output profile was built from:
track elements will be placed in the appropriate track by default,
that is the one that will be connected to the matching profile.
For multi-clip timelines, the situation doesn't change, users will
still have to implement a callback and do the leg work of placing
track elements (if any) in a matching track (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
chroma-format, bit-depth-chroma, bit-depth-luma are all informative
fields set by the H265 and H265 parser upon receiving an SPS.
They shouldn't be constrained downstream of the parser, instead
if a user wants those to ultimately match certain values they
should do so by constraining a profile.
In this case however, we also always remove the profile constraint
in order to let encoders pick a suitable one as a function of the
raw input video format and their own capabilities.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.
In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.
Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.
We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.
Relevant upstream merge requests / issues:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
Forgot to change the wrap type in e0014ef4fe which broke the
subproject. Wasn't noticed by CI because the subproject cache wasn't
regenerated.
The accompanied patch was included in 2.8.2, so it is not needed. It
was originally needed with 2.8.1
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2812>
For formats which we don't have fast-path implementation, compositor
will convert it to common unpack formats (AYUV, ARGB, AYUV64 and ARGB64)
then blending will happen using the intermediate formats.
Finally blended image will be converted back to the selected output format
if required.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
It is entirely possible for the cancellable to be cancelled (and freed)
in gst_rtsp_connection_flush() while there may be an ongoing read/write
operation.
Nothing prevents gst_rtsp_connection_flush() from waiting for the
outstanding read/writes.
This could lead to a crash like (where cancellable has been freed
within gst_rtsp_connection_flush()):
#0 0x00007ffff4351096 in g_output_stream_writev (stream=stream@entry=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6af950, cancellable=cancellable@entry=0x7fff300288a0, error=error@entry=0x7ffe2c6af958) at ../subprojects/glib/gio/goutputstream.c:377
#1 0x00007ffff44b2c38 in writev_bytes (stream=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6afb90, block=block@entry=1, cancellable=0x7fff300288a0) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:1320
#2 0x00007ffff44b583e in gst_rtsp_connection_send_messages_usec (conn=0x7fff30001370, messages=messages@entry=0x7ffe2c6afcc0, n_messages=n_messages@entry=1, timeout=timeout@entry=3000000) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:2056
#3 0x00007ffff44d2669 in gst_rtsp_client_sink_connection_send_messages (sink=0x7fffac0192c0, timeout=3000000, n_messages=1, messages=0x7ffe2c6afcc0, conninfo=0x7fffac019610) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:1929
#4 gst_rtsp_client_sink_try_send (sink=sink@entry=0x7fffac0192c0, conninfo=conninfo@entry=0x7fffac019610, requests=requests@entry=0x7ffe2c6afcc0, n_requests=n_requests@entry=1, response=response@entry=0x0, code=code@entry=0x0) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:2845
#5 0x00007ffff44d3077 in do_send_data (buffer=0x7fff38075c60, channel=<optimized out>, context=0x7fffac042640) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:3896
#6 0x00007ffff4281cc6 in gst_rtsp_stream_transport_send_rtp (trans=trans@entry=0x7fff20061f80, buffer=<optimized out>) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream-transport.c:632
#7 0x00007ffff4278e9b in push_data (stream=0x7fff40019bf0, is_rtp=<optimized out>, buffer_list=0x0, buffer=<optimized out>, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2586
#8 check_transport_backlog (stream=0x7fff40019bf0, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2645
#9 0x00007ffff42793b3 in send_tcp_message (idx=<optimized out>, stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2741
#10 send_func (stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2776
#11 0x00007ffff7d59fad in g_thread_proxy (data=0x7fffbc062920) at ../subprojects/glib/glib/gthread.c:827
#12 0x00007ffff7a8ce2d in start_thread () from /lib64/libc.so.6
#13 0x00007ffff7b12620 in clone3 () from /lib64/libc.so.6
Fix by adding a cancellable lock and returning an extra reference used
across all read/write operations. gst_rtsp_connection_flush() can free
the in-use cancellable and it will no longer affect any in progress
read/write.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2799>
1.21.0.1 should not satisfy a check for 1.22.0.
If someone needs more control they should do a feature check for
the symbol in the headers or lib.
Based on a similar patch by Tim-Philipp Müller for libnice.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2501>
The caps negotiation should respect the selected method to the test pipeline below works properly.
gst-launch-1.0 videotestsrc ! video/x-raw,width=320,height=600 ! videoflip method=clockwise ! video/x-raw,width=600,height=320 ! fakesink
Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2803>
In the trick mode, driver may queue a valid buffer follow by an
empty buffer which has no valid data to indicate EOS.For the empty
buffer whose memory is multi-plane, need to resize it before
unreference it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2731>
Depending on device feature level, d3d11 runtime can support
ID3D11Fence which is equivalent to ID3D12Fence.
Waiting using fence has performance-wise benefit over pulling
ID3D11Query status. If ID3D11Fence is not supported by device,
then ID3D11Query will be used instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2790>
4x downscaling of chroma with co-sited chroma has never worked
it seems.
Fixes incorrect videotestsrc output and videoconvert conversions
to Y41B, YUV9, YVU9 and IYU9 with co-sited chroma.
e.g.
gst-launch-1.0 videotestsrc ! video/x-raw,format=Y41B,width=1280,height=720 ! \
videoconvert ! autovideosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2789>
It may happens that bitstream doesn't provided SPS in decoding order
(like in VPSSPSPPS_A_MainConcept_1 conformance test file).
To be sure that the decoder got the correct SPS parameters process
SPS just before start decoding the frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2575>
While possible defer computataion of pps and sps fields until
slice parsing since it may happens that bitstreams don't encoded
them in expected order.
A example weird ordered bitstreams is VPSSPSPPS_A_MainConcept_1
conformance test.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2575>
The function g_array_sized_new() leaves the len to 0, but the slice
implementation assumes it would be set to 4. Sending multiple slices is
not yet support for H.264 as no driver needed it yet, but if that code
was to be used it would have overflowed as the array would never grow as
multiple 0 by 2 always results in 0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079>
And also don't assert that there are no buffers queued up when handling
an EOS event. The pad's streaming thread might've already received a new
stream-start event and queued up a buffer in the meantime.
This still leaves a race condition where the srcpad task sees all pads
in EOS state and finishes the stream, while shortly afterwards a pad
might receive a stream-start event again, but this doesn't seem to be
solveable with the current aggregator design.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2769>
SMPTE 170M and 240M use the same RGB and white point coordinates
and therefore both primaries can be considered functionally
equivalent.
Also, some transfer functions have different name but equal
gamma functions. Adding another colorimetry compare function
to deal with thoes cases at once
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765>
In file included from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/gstreamer-1.0/gst/gl/gstglfuncs.h:87,
from ../gst-plugins-good-1.20.3/ext/qt/qtglrenderer.cc:14:
../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/gstreamer-1.0/gst/gl/glprototypes/gstgl_compat.h:40:18: error: conflicting declaration 'typedef void* GLsync'
40 | typedef gpointer GLsync;
| ^~~~~~
In file included from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtGui/qopengl.h:127,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsggeometry.h:44,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsgnode.h:43,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsgrendererinterface.h:43,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qquickwindow.h:44,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/QQuickWindow:1,
from ../gst-plugins-good-1.20.3/ext/qt/qtglrenderer.cc:6:
../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtGui/qopengles2ext.h:24:26: note: previous declaration as 'typedef struct __GLsync* GLsync'
24 | typedef struct __GLsync *GLsync;
| ^~~~~~
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2763>
These patches are taken from upstream, and they fix compile failures
with latest clang. These can be dropped when upgrading these wraps.
This is currently causing a warning because we do not require the
version of meson that ships with this feature: 0.63.0. The version has
not been bumped because older Meson versions gracefully ignore the
wrap field, this fix is optional and only needed on macOS, and 0.63.0
is a very new release with a bug that partially breaks this feature:
https://github.com/mesonbuild/meson/pull/10602
We can consider bumping the requirement once 0.63.1 is released.
Also switch from git to tarballs, no reason to use git here anymore.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2761>
We should move this functionality to gst-libs so that GstD3D11Converter
can be moved to gst-libs.
Another advantage is that applications can call our
HLSL compiler wrapper method without any worry about OS version
dependent system installed HLSL library.
Note that there are multiple HLSL compiler library versions
on Windows and system installed one would be OS version dependent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2760>
We need GStreamer elements to do the bandwidth estimation as this way
they can also control the pacing of the transmission flow as specified
in the [GCC] algorithm for example.
Bandwidth estimator element are placed right before the "RTPSession" as
an "rtp-aux-sender" element. This way they can use the "Transport-wide
Congestion Control" RTCP feedback messages through the "RTPTwcc" custom
events that are sent by the rtpsession.
Applications are responsible to react to the bandwidth estimator element
and set the encoder target bitrate etc... which means that we can not
pass an estimator as an element factory, so a signal as been chosen
instead.
[GCC]: https://datatracker.ietf.org/doc/html/draft-ietf-rmcat-gcc-02
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2562>
Raw memory upload should always be the least preferred input
caps, only added by the raw memory uploader as the last thing
in the caps.
Caps negotiation should still choose raw data when it needs to,
and other upload methods that can accept raw data buffers will still do so.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2725>
