Delay decoders downstream negotiation just before an output frame
needs to be allocated.
This is required, are least for H.264 and H.265 decoders, since
codec_data might trigger a new sequence before finishing upstream
negotiation, and sink pad caps need to set before setting source pad
caps, particularly to forward HDR fields. The other decoders are
changed too in order to keep the same structure among them.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1257>
Using GstBaseDec hack to access the parent_object of each element in
the element itself is a bit fragile. It would be better to keep its
own parent object as the usual global variable. It would make it
resistant to code changes.
The GstBaseDec macro to access the parent object now it's internal to
base decoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1257>
We were checking if the start time of the gap event was
GST_CLOCK_TIME_NONE, which is superfluous because that cannot happen,
and then not checking if it was NONE after gst_segment_to_running_time,
which caused a crash if an identity received a gap event fully or
partially outside the current segment.
This patch was done in cooperation with:
Jan Alexander Steffens (heftig) <jan.steffens@ltnglobal.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1269>
.. if a current direction has already been set
When `webrtcbin` has created an offer based on codec_preferences,
it might not have received caps on its sinkpads by the time a
remote description is set, in which case we want to connect the
input stream upon actual reception of the caps instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1233>
With mpeg4videoparse drop=false config-interval=N|-1 we might be
trying to insert a config before we have actually received one,
in which case we'll try to map a NULL buffer which will generate
lots of criticals.
Fixes#855
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1265>
gst_va_fixate_format() will iterate all othercaps' structures to find
the one with less information lost at color conversion. If a structure
with same color format is found, the iteration stops. It's like a
smart truncation. Then, this function also will choose the caps
feature.
Later this structure is used fixate its size and no further truncation
is needed.
Don't intersect at fixate, since it kills possible resizing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1261>
If the pad does not have a current caps, get_pad() returns the query
caps which can be ANY. In such case the caps does not have any structure
resulting in a critical warning when calling gst_caps_get_structure().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1254>
Detected while reading the code, cccombiner must set
self->current_video_buffer to NULL *after* emitting selected-samples
in order for the application to get a useful return when peeking
the next video sample.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1252>
When schedule is true (as is the case by default), we insert padding
when no caption data is present in the schedule queue, and previously
weren't checking whether the caption pad had gone EOS, leading to
infinite scheduling of padding after EOS on the caption pad.
Rectify that by adding a "drain" parameter to dequeue_caption()
In addition, update the captions_and_eos test to push valid cc_data
in: without this cccombiner was attaching padding buffers it had
generated itself, and with that patch would now stop attaching
said padding to the second buffer. By pushing valid, non-padding
cc_data we ensure a caption buffer is indeed attached to the first
and second video buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1252>
Also refactor various internals of the monitor code:
- Don't allow starting twice but just return directly when starting a
second time.
- Don't end up in an inconsistent state if call start() a second time
while the monitor is starting up.
- Remove complicated cookie code: it was not possible to add/remove
filters while the monitor was started anyway so this was only useful
in the very small time-window while starting the monitor or while
getting the devices. Instead disallow adding/removing filters while
the monitor is starting, and when getting devices work on a snapshot
of providers/filters.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/667
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1189>
At gst_va_dmabuf_allocator_setup_buffer_full, static code analysis tool
does not know number of objects in descriptor is always larger than 0 if
export_surface_to_dmabuf succeeds. Thus, the tool will assume buf is
allocated with mem but not released when desc.num_objects equals to 0
and raise a mem leak issue.
For gst_va_dambuf_memories_setup, we should also inform the tool that
n_planes will be larger than 0 by checking the value at very beginning.
Then, the defect similar to above will not be raised during static analysis.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1241>
gst_base_parse_reset() does not reset data_bytecount to 0, so
gst_base_parse_update_bitrates() uses a wrong value to calculate
the average bitrate on subsequent pipeline starts. This leads to an
excessive amount of "tag" events being pushed. These events include
very high "bitrate" values that diminish over time, and are produced
until the average bitrate is back to sane values.
Fixes#840
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1228>
This will only affect individual/tarball module builds, as the
options yield to the parent project which was set to gpl=disabled
by default already. We kept it as auto in the original commit
to accommodate the need to update cerbero as well, which had to
be done separately after the initial commit.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1217>
Previously gst_structure_has_name was used to get a string to compare with supported mimetypes.
This is incorrect as above function returns a user defined structure name which is
not the structure mimetype value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1206>
Trying to reset before the pads have been deactivated races with the
streaming thread. There was also a buggy buffer clear leaving a dangling
`stored_frame` pointer around. Use `gst_interlace_reset` so this happens
properly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1039>
We don't support D3D11 interop for UWP because some APIs
(specifically MFTEnum2) are desktop application only.
However, the code for symbol loading is commonly used by both UWP and WIN32.
Just link GModule unconditionally which is UWP compatible, and simply don't
try to load any library/symbol dynamically when D3D11 interop is unavailable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1216>
... in favour of dep.get_variable('foo', ..) which in some
cases allows for further cleanups in future since we can
extract variables from pkg-config dependencies as well as
internal dependencies using this mechanism.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
When ass hinting value is set to anything other than NONE,
subtitles cannot use smooth scaling, thus all animations will jitter.
The libass author warns about possibility of breaking some scripts when it is enabled,
so lets do what is recommended and disable it to get the smooth scaling working.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1201>
WebVTT in ISO MP4 is specified in ISO 14496-30,
and needed for DASH support. It's stored in an
mp4 specific format. To handle it compatibly,
the wvtt boxes are converted back into WebVTT text
and pushed as application/x-subtitle-vtt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1182>
Swap the `need_process` boolean check on qtdemux streams
for a direct function pointer to the splitting function,
so we can stop adding extra cases to the single growing
`gst_qtdemux_process_buffer()` function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1182>
Currently the extension data length specified in the RTP header would
say it was shorter then the data serialised to a packet. When
combining the resulting buffer, the underlying memory would still
contain the extra (now 0-filled) padding data.
This would mean that parsing the resulting RTP packet would potentially
start with a number of 0-filled bytes which many RTP formats are not
expecting.
Such usage is found by e.g. RTP header extension when allocating the
maximum buffer (which may be larger than the written size) and shrinking
to the required size the data once all the rtp header extension data has
been written.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1146>
