If input height and parsed one are identical, do not consider it as interlaced
Fixing below pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw,format=I420,width=640,height=10 \
! jpegenc ! jpegparse ! jpegdec ! videoconvert ! autovideosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6181>
After a flushing seek, rtspsrc doesn't reset the last_ret value for
streams, so might immediately shut down again when it resumes pushing
buffers to pads due to a cached `GST_FLOW_FLUSHING` result
Prevent a stored flushing value from immediately stopping
playback again by resetting pad flows before (re)starting
playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6137>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one process
run we push them all into a GstBufferList and push them out at once to
make sure that each buffer gets notified about each header extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
In rtpbin we already systematically check for all property names
except latency, correct that.
In webrtcbin we need to check before trying to use the do-retransmission
property.
This is useful for the case where an element like identity gets passed
to rtpbin's request-jitterbuffer property, when the application wants
to use webrtcbin in an SFU situation, with no reordering and no added
latency
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6112>
Today when using the `splitmuxsrc` on a collection of files named as:
```
item0.mkv
item1.mkv
item2.mkv
[...]
item10.mkv
item11.mkv
[...]
```
You will get a continuous stream made in the order of:
```
item0.mkv -> item1.mkv -> item10.mkv -> item11.mkv -> [...]
```
You can fix this by having smarter names of the items:
```
item000.mkv
item001.mkv
item002.mkv
[...]
item010.mkv
item011.mkv
[...]
```
Will get you:
```
item000.mkv -> item001.mkv -> item003.mkv -> item004.mkv -> [...]
```
But, we could also "fix" the former case by using natural ordering when
comparing the files in gstsplitutils.c.
Fixes#2523
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4491>
When level value is greater than 127, it was being clamped but this clamped
value was not the one being actually used. For level values greater than 127
this resulted in an incorrect value being used. As an example, a level value
of 187, after and'ed with 0x7F, it would result in 0x3B being reported as the
level value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5893>
When reopening a v4l2 device, the v4l2object->poll will include some old fds,
which was assigned to this device before. If the pipeline opens multiple v4l2
devices, the old fd may been assigned to other v4l2 devices when reopening
devices.
This will cause the timing of the pipeline become confusing when polling devices,
leading functional abnormalities.
Therefore, when closing v4l2object, remove the old fds in poll to ensure that the
pipeline timing is normal.
Signed-off-by: Chao Guo <chao.guo@nxp.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5820>
Apparently external-oes is not supported by the plugin as texture target,
while DMABuf uploading prefers it because it's zero copy.
This patch enables DMABuf uploading and rendering by using either 2D or
rectangle texture targets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5795>
This simplifies the way it picks the closest caps to preference and take into
consideration the framerate to avoid picking high resolution at 5fps or so.
Simply calculate a "distance" of caps A and B from the preference and put
closest first, sorting by framerate first.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5777>
The `GstFlowCombiner` is responsible for tracking the flow of each
stream and handle the overal flow return value. Without that, we
can end up with the following scenario:
- Audio+video stream
- Only the video stream is linked downstream
- The audio stream goes EOS, video doesn't yet
-> We update the Flow in the combiner with OK as all streams are not EOS
- Video goes EOS because downstream returned EOS
-> `qtdemux` returns `FLOW_OK` forever because the unlinked audio pad
has `last_flowret==FLOW_OK`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5724>
The tags and caps were leaked for unknown streams, I'm not sure they'd be valid
in that case, but better safe than sorry.
The tags ownership is transfered when calling `gst_adaptive_demux_track_new()`
so unreffing those afterwards was a mistake.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5714>
If this property is enabled then the jitterbuffer will do the normal PTS
calculations according to the configured mode instead of making use of
the RFC7273 media clock.
The timestamp calculated from the RFC7273 media clock will only be
stored in the reference timestamp meta, if addition of that meta is enabled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
When this property is used, it is assumed that the system clock is
synced close enough to the media clock used by an RFC7273 stream.
As long as both clocks are at most a few seconds from each other this
will give the correct results and avoids having to create an actual
network clock that has to sync first.
If the system clock is actually synchronized to the media clock then
everything will behave exactly the same, otherwise the reference
timestamp meta will be correct but the buffer timestamps will be off by
the difference between the two clocks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
Do more checks for clock equality than just checking pointers. The same
NTP/PTP clock might be used as pipeline clock but a new instance, so
instead also check what clock they are synced to.
Also handling setting / resetting of the media clock and pipeline clock
correctly by resetting the media clock's state accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5512>
Because we treat raw audio chunks/samples as keyframes, they were interfering
with seek time adjustment.
Became apparent when the accompanying video stream was I-frame only,
for example ProRes.
Since raw audio streams can be seeked freely, it's fine to just ignore them here,
giving priority to the real keyframes in the video stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4946>
In snapshot mode pngenc should output exactly one frame
and then return FLOW_EOS to upstream. If upstream sends
more input frames before shutting down, it should keep
returning FLOW_EOS but not output any more encoded frames.
After a flushing seek it should output frames again though.
Fixes#3069.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5546>
The default 2MB ENCODED_BUFFER_SIZE can't support some 4K video playback. We now
detect the driver reported maximum resolution and choose an appropriate
default bitstream size accordingly. For 4K video these results in around 4MB
buffer instead of 2MB.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4549>
After rendering a QML scene the qml6glsrc element copies the contents of
the scene to a GStreamer buffer. This happens on the Qt render thread.
Then it attaches a sync point to the destination buffer. This sync point
must be awaited by other threads which use the buffer later on. The
current implementation relies on the downstream elements to wait for the
sync point. However, there are situation where this does not work. The
GstBaseTransform e.g. copies the buffer metadata (which overwrites the
sync point without waiting for it) *before* waiting for the sync point.
This commit waits for the sync point inside the qml6glsrc element before
sending it downstream. The wait command is issued on the streaming
thread with the pipeline OpenGL context, i.e. it will synchronize with
the GStreamer OpenGL thread.
This is a port of the original fix for the qmlglsrc element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5519>
After rendering a QML scene the qmlglsrc element copies the contents of
the scene to a GStreamer buffer. This happens on the Qt render thread.
Then it attaches a sync point to the destination buffer. This sync point
must be awaited by other threads which use the buffer later on. The
current implementation relies on the downstream elements to wait for the
sync point. However, there are situation where this does not work. The
GstBaseTransform e.g. copies the buffer metadata (which overwrites the
sync point without waiting for it) *before* waiting for the sync point.
This commit waits for the sync point inside the qmlglsrc element before
sending it downstream. The wait command is issued on the streaming
thread with the pipeline OpenGL context, i.e. it will synchronize with
the GStreamer OpenGL thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5506>
With one regular image file path provided (without %05d),
the element was stuck in a dead loop counting the frames:
gst_image_sequence_src_count_frames
This allows to display any image file out of the element
for a given number of buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5471>
If the v4l2videoenc receives an QUERY_ALLOCATION, it must not propose a
currently used pool, because it cannot be sure that the allocation query came
from exactly the same upstream element. The QUERY_ALLOCATION will not contain
the internal OUTPUT pool.
The upstream element (the basesrc) detects that the newly proposed pool differs
from the old pool. It deactivates the old pool and switches to the new pool.
If there was a format change, a new OUTPUT buffer pool will be allocated in
gst_v4l2_object_set_format_full() and the CAPTURE task will be stopped to switch
the format. If there hasn't been a format change,
gst_v4l2_object_set_format_full() will not be called. The old pool will be kept
and reused.
Without a format change, the processing task continues running.
This leads to the situation that the processing task is running, but the OUTPUT
buffer pool (the old pool) is deactivated. Therefore, the encoder is not able to
get buffers from the OUTPUT pool and encoding cannot continue.
This situation can be triggered by sending a RECONFIGURE event without a format
change.
Resolve this situation by ensuring that the OUTPUT buffer pool is always
activated when frames arrive at the encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4235>
There is a CAPTURE pool in the same function. While the CAPTURE pool is called
cpool, using pool for the OUTPUT pool is confusing.
Using opool for the OUTPUT pool makes it more obvious, which pool is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4235>
We were already converting the pad last timestamp to running time but
not the segment position.
This segment position is used by gst_aggregator_simple_get_next_time()
to compute the waiting time when aggregating.
Those waiting times were wrong in my live pipeline using the system
clock, resulting in the aggregator to never wait at all.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5460>
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.
gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5458>
There is a race condition where transfer has not been submitted yet while the
request is cancelled which leads to the transfer state going back to
`DOWNLOAD_REQUEST_STATE_OPEN` and the user of the request to get signalled about
its completion (and the task actually happening after it was cancelled) leading
to assertions and misbehaviours.
To ensure that this race can't happen, we start differentiating between the
UNSENT and CANCELLED states as in the normal case, when entering `submit_request`
the state is UNSENT and at that point we need to know that it is not because
the request has been cancelled.
In practice this case lead to an assertion in
`gst_adaptive_demux2_stream_begin_download_uri` because in a previous call to
`gst_adaptive_demux2_stream_stop_default` we cancelled the previous request and
setup a new one while it had not been submitted yet and then got a `on_download_complete`
callback called from that previous cancelled request and then we tried to do
`download_request_set_uri` on a request that was still `in_use`, leading to
something like:
```
#0: 0x0000000186655ec8 g_assert (request->in_use == FALSE)assert.c:0
#1: 0x00000001127236b8 libgstadaptivedemux2.dylib`download_request_set_uri(request=0x000060000017cc00, uri="https://XXX/chunk-stream1-00002.webm", range_start=0, range_end=-1) at downloadrequest.c:361
#2: 0x000000011271cee8 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_begin_download_uri(stream=0x00000001330f1800, uri="https://XXX/chunk-stream1-00002.webm", start=0, end=-1) at gstadaptivedemux-stream.c:1447
#3: 0x0000000112719898 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_load_a_fragment [inlined] gst_adaptive_demux2_stream_download_fragment(stream=0x00000001330f1800) at gstadaptivedemux-stream.c:0
#4: 0x00000001127197f8 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_load_a_fragment(stream=0x00000001330f1800) at gstadaptivedemux-stream.c:1969
#5: 0x000000011271c2a4 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_next_download(stream=0x00000001330f1800) at gstadaptivedemux-stream.c:2112
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5435>
The counter was using a signed 8 bit integer, which was overflowing
after 127 entries. That was then passed as an unsigned 32 bit integer to
libflac, which caused it to be converted to a huge unsigned number.
That then caused an invalid memory access inside libflac.
As a bonus, signed integer overflow is undefined behaviour.
Instead, use an unsigned 8 bit integer. Once this overflows the existing
code already catches it and stops adding the cue. While FLAC__metadata_object_cuesheet_insert_track()
takes an unsigned 32 bit integer for the track number, FLAC__StreamMetadata_CueSheet_Track is
limiting it to an unsigned 8 bit integer.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2921
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5420>
Found that osxaudiosink could not be added standalone in gst-full build
using
-Dgst-full-elements=osxaudio:osxaudiosink because element registration
was
done at the plugin level. Now src/sink elements and deviceprovider have
their
individual registration.
Copied/adapted from the alsa plugin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5419>
scanlines->m1 = same line of the previous field
scanlines->t0 = line above of the current field
scanlines->b0 = line below of the current field
scanlines->mp = same line of the next field
Deinterlacing a field weaved frame:
When deinterlacing the top field, the next bottom field is available
(part of the same frame). but when deinterlacing the bottom field,
the next top field (part of the next frame) is not available and
scanlines->mp equals NULL.
In this case it's better to use greedy algorithm using the prevous field
(twice) rather then linear interpolation of the current field.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5331>
If we end up with GST_CLOCK_TIME_NONE as running time for an RTP packet
then this can't be used for bitrate estimation, and also not for
constructing the next RTCP SR. Both would end up with completely wrong
values, and an RTCP SR with wrong values can easily break
synchronization in receivers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5329>
The timestamp offset can be negative, and it can be a bigger negative
number than the latency introduced by the rtpjitterbuffer so the overall
timeout offset can be negative.
Using the negative offset for calculating how many packets can still
arrive in time when encountering a lost packet in an equidistant stream
would then overflow and instead of considering fewer packets lost a lot
more packets are considered lost.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5296>
gst_video_info_set_interlaced_format() can return an error if the
width/height causes integer overflow. Handle this case, so that we can
fail cleanly. This has been experienced while testing an in-progress
driver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5286>
Some drivers will push an buffer flagged LAST but empty. In decoder
case, this results in an "producing too many buffer" warning, even
though the result is entirely correct. Detect this case in order to
signal EOS earlier and avoid this warning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5286>
when playing some codec such as matroska with vp9 codec,
demuxer will save information like video_mastering_display_info
and video_content_light_level in caps that decoder need,
v4l2videodecoder can use it by calling V4L2_CTRL_CLASS_COLORIMETRY
ioctl.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4403>
If decoder notify a source change event when the capture format is
changed, not the resolution changed.
then gst_v4l2_object_acquire_format will retuen false due to
unsupported format.
we need to clear the format lists in the source change flow,
and reenumerate format list
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5218>
This elements pass RTP packets along unchanged and appear as a RTP
payloader element.
This is useful, for example when using the gstreamer-rtsp-server
library, in the case where you are receiving RTP packets from a
different source and want to serve them over RTSP. Since the
gst-rtsp-server library expect the element marked as payX to be a RTP
payloader element and assumes certain properties are available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5204>
Imported dmabuf are not being duped, so they should never be closed. Instead,
we ensure their live time by having strong reference on their original
buffer. This should fix potential flickering due to dmabuf being closed
too early.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5101>
