In the case where the queue shrinks due to a property change and the queue
becomes full, we would set the waiting_del flag, which would prevent posting the
100% buffering message on the bus. Since the pipeline is not aware of the new
buffering value, in the common case where the pipeline is paused during
buffering, it would never resume.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6165>
Remove the percent_changed check to determine whether a buffering message should
be posted. The check on the last posted buffering value is sufficient, and the
removal doesn't introduce additional complexity.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6165>
If input height and parsed one are identical, do not consider it as interlaced
Fixing below pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw,format=I420,width=640,height=10 \
! jpegenc ! jpegparse ! jpegdec ! videoconvert ! autovideosink
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6181>
When dealing with demuxers which aren't streams-aware, we need to handle the
old-school "stream replacement" dance from `parsebin` and hide that in such a
way that output pads are re-used (if compatible).
By analyzing the collection posted by parsebin, we can:
* Identify whether some output slots are no longer used (because the stream they
currently handle is not present in the collection)
* Decide if some upcoming streams could re-use the existing slot
This supports both buffering and non-buffering modes.
Fixes#1651
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6201>
When the conversion is only caps feature from memory:VAMemory to system memory,
it's possible to optimize by doing a pseudo pass-through since the va-backed
buffers are the same for system memory buffers.
This change will also mitigates #2940
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6174>
If the allocation query received from downstream doesn't handle GstVideoMeta but
it requests memory:DMABuf caps feature, it's incomplete, so we rather reject the
negotiation.
Both in base decoder, base transform and compositor.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6155>
When switching urisourcebin, ensure that we first unlink *all* pads from
decodebin3 before linking them again.
This is to ensure that decodebin3 completely knows that all previous pads are no
longer needed and can prepare itself to being re-used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6179>
The value is stored as an 8 bit integer, with 0 meaning that there is
not data for this extension. That means that the maximum length is 255
bytes and not 256 bytes.
On the other hand, the one-byte RTP header extensions are storing the
length as a 4 bit integer with an offset of 1 (i.e. 0 means 1 byte
extension length), so here 16 is the correct maximum length.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6180>
This is a simplification of the venerable
gst_va_base_dec_get_preferred_format_and_caps_features() function, which
predates since gstreamer-vaapi. It's used to select the format and the
capsfeature to use when setting the output state. It was complex and hard to
follow. This refactor simplifies a lot the algorithm.
The first thing to remove _downstream_has_video_meta() since, most of the time
it will be called before the caps negotiation, and allocation queries make sense
only after caps negotiation. It might work during renegotiation but, in that
case, caps feature change is uncommon. Better a simple and common approach.
Also, for performance, instead of dealing with caps features as strings, GQuarks
are used.
The refactor works like this:
1. If peer pad returns any caps, the returned caps feature is system memory and
looks for a proper format in the allowed caps.
2. The allowed caps are traversed at most 3 times: one per each valid caps
feature. First VAMemory, later DMABuf, and last system memory. The first to
match in allowed caps is picked, and the first format matching with the
chroma is picked too.
Notice that, right now, using playbin videoconvert never return any.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6154>
Some subtitle "decoders" had a wrong category of "Parser", which `parsebin`
relies on to identify elements which do not *decode* streams but *parse* them.
This would cause such subtitle decoders to be plugged in within parsebin,
preventing the original stream to be properly used by (more efficient)
downstream decoders or subtitle renderers.
Fixes#1757
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6153>
If we drop all messages with the same clock id as ours we will also
drop all messages coming from a PTP clock on our host since both clock
ids are build from the same MAC address.
At least for Linux we do not see our own messages anyway since the
network stack can well distinguish between multicast send from our
socket or from another socket on the same machine. To make sure that
this works for all supported platforms just drop delay requests since
this is the only message that is sent from the GStreamer PTP clock.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6172>
If we don't specify a path for loading, the runtime linker will search
for the library instead, which will use the usual mechanisms: RPATHs,
LD_LIBRARY_PATH, PATH (on Windows), etc.
Also try harder to load a non-devel libpython using INSTSONAME, if
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6159>
After a flushing seek, rtspsrc doesn't reset the last_ret value for
streams, so might immediately shut down again when it resumes pushing
buffers to pads due to a cached `GST_FLOW_FLUSHING` result
Prevent a stored flushing value from immediately stopping
playback again by resetting pad flows before (re)starting
playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6137>
This can be used to store informational messages, errors or
warnings which can later be shown to the user in gst-inspect-1.0,
which can be useful for plugins that expose elements dynamically
based on external libraries or hardware capabilities.
Status messages can then provide an indication as to why a
plugin doesn't have any elements listed, for example.
Plus unit test to make sure code paths are exercised a little.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3832>
This inherits from the same rule as gst_buffer_add_meta
```
gst-mpegtspesmetadatameta.h:98: Warning: GstMpegts:
gst_buffer_add_mpegts_pes_metadata_meta: return value: Invalid non-constant
return of bare structure or union; register as boxed type or (skip)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6146>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
Because this depayloader may build several output buffers within one process
run we push them all into a GstBufferList and push them out at once to
make sure that each buffer gets notified about each header extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
This reverts questionable commit 009bc15f33
which looks completely wrong.
The GstWasapi2RingBuffer:buffer_size variable is used to
calculate available buffer size we can write
(i.e., available size = buffer_size - padding_size).
But the commit makes the size to be exactly same as buffer period.
Then, it can confuse this element as if the endpoint buffer is full on
I/O event callback (if padding size is equal to buffer period)
but it's not true.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2870
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6132>
- Add the missing field parameter and put the output parameter at the
end.
- Use a switch to verify valid values instead of hard-to-follow range
checks.
- Don't consider bad values a programming error, just a regular failure.
- Set all data fields at the end so we can pass a pointer to an
uninitialized structure without GCC complaining.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5450>
The global semaphore was never closed/unlinked, causing permission
denied issue if the device is later used by another user. Properly
removing the semaphore when stopping the pipeline would still leave it
open in case of a crash.
With a GStreamer specific name, it was also not preventing other apps to access
the device concurrently.
Finally, if the system has multiple cards, the lock should be per card
and not global (to be confirmed).
Fixes: #3283.
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6117>
MaxDpbSize specified in A.4.2 tells upper bound of decoded picture
buffer size but does not tell actual required size.
Use max_dec_pic_buffering value as a dpb size. Some backends
such as DXVA and NVDEC might require pre-allocated DPB buffer
and unnecessary large DPB size will result in waste of GPU memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6101>
In rtpbin we already systematically check for all property names
except latency, correct that.
In webrtcbin we need to check before trying to use the do-retransmission
property.
This is useful for the case where an element like identity gets passed
to rtpbin's request-jitterbuffer property, when the application wants
to use webrtcbin in an SFU situation, with no reordering and no added
latency
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6112>
When allocating buffers with alignment parameters specified, it
may be necessary to overallocate memory to adjust to the requested
alignment. Previously the padding length was not included in the mmaped
buffer size, leaving unmapped bytes at the end of the buffer.
This caused intermittent SEGV faults and valgrind failures when running
the wayland_threads example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6104>
The srt unittest test_src_listener_sink_call will sometimes fail under
valgrind with the following splat:
Memcheck, a memory error detector
Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
Using Valgrind-3.18.1 and LibVEX; rerun with -h for copyright info
Parent PID: 14579
HEAP SUMMARY:
in use at exit: 799,848 bytes in 2,182 blocks
total heap usage: 64,090 allocs, 61,908 frees, 37,891,032 bytes allocated
120 bytes in 1 blocks are definitely lost in loss record 1,563 of 1,681
at 0x4842FF5: operator new(unsigned long) (vg_replace_malloc.c:422)
by 0x6031E29: srt::sync::SetThreadLocalError(CUDTException const&) (sync_posix.cpp:461)
by 0x5FCD77E: CUDT::epoll_wait(int, std::set<int, std::less<int>,
std::allocator<int> >*, std::set<int, std::less<int>,
std::allocator<int> >*, long, std::set<int, std::less<int>,
std::allocator<int> >*, std::set<int, std::less<int>, std::allocator<int> >*) [clone .cold] (api.cpp:3796)
by 0x5FE2F79: UDT::epoll_wait2(int, int*, int*, int*, int*, long, int*, int*, int*, int*) (api.cpp:4277)
by 0x5F0C626: gst_srt_object_read (gstsrtobject.c:1569)
by 0x5F0F978: gst_srt_src_fill (gstsrtsrc.c:180)
by 0x5F5A2A1: gst_base_src_default_create (gstbasesrc.c:1620)
by 0x5F5C9AE: gst_base_src_get_range (gstbasesrc.c:2630)
by 0x5F5EF5A: gst_base_src_loop (gstbasesrc.c:2959)
by 0x4918B13: gst_task_func (gsttask.c:399)
by 0x4A60B33: g_thread_pool_thread_proxy.lto_priv.0 (gthreadpool.c:354)
by 0x4A5DC41: g_thread_proxy (gthread.c:826)
by 0x4F532A4: start_thread (pthread_create.c:481)
by 0x4C71322: clone (clone.S:95)
An issue has been started against libsrt here:
https://github.com/Haivision/srt/issues/2867
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6098>
External plugin loader support for Windows is introduced
in this dev cycle. Since helper binary was not required (useless)
before this version, people may not ship the binary
with new GStreamer version, then they will observe warning message.
Instead of displaying the warning at plugin loading time,
checks helper bin earlier and disable external plugin loader
if helper binary is not installed.
Fixes: https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/448
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6083>
According to recommendation from MS, IDXGIOutputDuplication::ReleaseFrame()
needs to be called just before IDXGIOutputDuplication::AcquireNextFrame()
for performance reasons, so that driver can accumulate dirty rects
and update texture at once. But it seems to cause choppy output.
Do release acquired frame immediately once processing done,
like d3d11 implementation does.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6092>
