Instead return after every iteration, which makes sure that the
stream lock is released for a short time after every iteration,
task state changes are checked, etc and this allows the task
to be stopped properly.
- Set reading_pos correctly in _create_read ()
- Seek to data if it is further than QUEUE_MAX_BYTES (queue) -
cur_level.bytes away. This should avoid a situation where the ring
buffer is full but the data offset from which we shall read is not in
the ring buffer.
- Only update the max_reading_pos to a lower value to protect data when
necessary
- Always signal an ADD in _locked_enqueue () so that an EOS unlocks the
reader
- More useful debug output
update_buffering () needs to be called every time we write to the ring
buffer so that applications don't get stuck waiting for a 100% buffered
message while queue2 is waiting for space
_create_write () must only be called for temp file/ring buffer cases
Cached data could have been overwritten so it is now protected until
it is read. Similarly data was overread as _have_data () was always
looking for the originally requested data even if part of it had been
read already.
Use cur_level.bytes to see how much space is free in the ringbuffer.
Simplyfy the write function, avoid taking subbuffers, move waiting for free
space in one spot, use simply counter to write data of a buffer.
- make _get_range () emit the del signal once a buffer has been read
- use do {} while (); for wait code as queue is locked and no data could
have been read in the mean time so it makes no sense to check before
waiting
- make _is_filled () more robust
Current range was being updated in the thread performing seek, but as
no locks were kept for a short section, data flow could resume before
current range updated, so data for the new range would be accepted as
from the previous range.
Rather, range should be updated in serialized manner based on
newsegment event.
Since everything GstXML related has been deprecated, we can now skip the
libxml includes from the public headers when GST_DISABLE_DEPRECATED is
defined.
See #463435.
Don't override the default get_times vmethod so that we can use the sync
property.
Set the default sync property to FALSE. It used to be set to TRUE but because
the get_times was NULL, it always behaved like FALSE.
Fixes#621530
Implement a custom acceptcaps function. We can simply check if there is an
intersection with the new caps. This makes the accept caps function much faster.
See #621190
When in download mode and we need to provide data for an offset that we don't
have, also perform a seek to the requested location when we are EOS. The reason
why we shouldn't wait for more data is because after EOS, there simply will be
no more data and we end up waiting forever.
Fixes#620500
Parse a size=value from the query string to specify a size. This is interesting
when reading from a file descriptor that actually has a size (and is not
stat-able, such as the socket of an http connection)
Maintain a separate variable to control src and sink flowreturn values so that
we can unlock the src part without shutting down the sink part.
Add flushing for upstream pull based elements that unblocks our getrange
function. This implements seeking when blocking for more data.
Add some arbitrary threshold before attempting a seek. Add a FIXME for this
because we need to find a sensible threshold based on the input rate.
When in download mode and the requested offset is too far away, attempt to do a
seek request to fetch the data.
Keep track of all downloaded parts and merge ranges when needed.
Fixes#600877
This changes some APIs in compatible ways:
- Some functions now take "const char *" arguments, not "char *"
- Some structs now have "conts char *" members, not "char *"
The changes may cause warnings when compiling with the right warning
flags. You've been warned.
Also adds -Wwrite-strings as a warning flag in configure.ac.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
_create() is a pad function set by ourselves, therefore we're sure basesrc
is a GstFileSrc.
Speeds up _create() by 17% and the total call by 8% (instruction calls measurements
done with valgrind).
Fixes#610246
Initialize new_fd with DEFAULT_FD and fd with -1. Setting the property will set
new_fd and in _update_fd() we cehck fd against -1. Also add a coment about the
warning we get in the log from gst_poll_remove_fd(). We could get rid of the
warning if we want by tracking if fd has been added to fdset.
Typefind might mess up pads modes (pull/push) if a
downstream element is plugged and its pads activated
in 'step 2' of typefind pads activation.
This happens because the following steps don't check
if we already emitted typefound due to upstream setting
caps on buffers being pulled in the typefind helpers.
Avoid that by checking if typefound is already emmited.
Fixes#608036
When a downstream element returns GST_FLOW_UNEXPECTED we want to:
* let the dataqueue task running
* forward the flow return upstream.
This allows upstream elements to push EOS, and have that EOS event come
downstream.
Fixes#609274
When we receive an UNEXPECTED flowreturn from downstream, we must not shutdown
the pushing thread because upstream will at some point push an EOS that we still
need to push further downstream.
To achieve this, convert the UNEXPECTED return value to OK. Add a fixme so that
we implement the right logic to propagate the flowreturn upstream at some point.
Also clean up the unit test a little.
Fixes#608136
Add an option to automatically remove the temp file (TRUE by default). This
should make it possible for the application to keep the temp file by other means
than hardlinking or holding an fd open.
Fixes#607739
For the reason outlined at the beginning of gst_private.h (inline
functions in glib may need the g_log_domain variable). Also include
gst_private.h before using any G_OS_* defines, esp. in plugin loader.
Protect the ->removed field with the object lock as well. Take the DYN lock
earlier so that we can mark the pad removed and avoid a race in pad_alloc.
Fixes#606435
gstfilesink.c:399: error: format ‘%d’ expects type ‘int’, but argument 8 has type ‘size_t’
gstfilesink.c:399: error: format ‘%d’ expects type ‘int’, but argument 9 has type ‘gsize’
gstfilesrc.c:588: error: format ‘%08llx’ expects type ‘long long unsigned int’, but argument 8 has type ‘off_t’
It is not easy to setup a tee on the fly, thus apps need to add them always if
they might need them. This changes the code so, that if only one src-pad is
active, we push buffers directly. In the normal code path all buffers are pushed
with an extra ref, that forces followup inplace elements to copy the data.
Cast the variable to gint to conform to the printf format used.
It is casted rather than changing the format because the
message is created with a cast to gint too.
queue2 would crash when using small buffer sizes because
it would overflow when calculating the percentage, resulting
in the buffering GstMessage not being created and trying to be
used. This patch uses a gint64 instead of a gint to do the
percentage math, making it harder to overflow.
Using the current fill level of the queue, and the average input
rate, we can determine how long it will take to finish downloading
the whole stream to the temporary file.
Fixes#600726
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
Add support for buffering mode where we post BUFFERING messages based on the
level of the queues. It currently operates on the first queue that goes over or
under the high/low thresholds.
In buffering mode we want to ignore the max visible items to decide when the
queue is filled. Instead, we only look at the number of bytes and/or time in the
queue.
Don't shadow the sq argument in the underrun_cb function but use
a different variable name to iterate the other queues.
Use the same variable name in the overrun_cb function.
Split gst_queue_locked_enqueue() into variant for buffer and event to get rid of
the if() and make the code more readable (constant boolean parameters are never
nice). Removes the if (item) checks as we dereference the pointer before anyway.
Also apply the same idea of reusing the previous knowledge in
gst_queue_locked_dequeue to remove more type checks.
We know earlier on in the code whether we're handling an event or a buffer,
just pass that information through.
This commit and the previous commit reduce instruction fetch:
* when pushing buffer (_chain) by 10%
* when popping buffer (_loop) by 3%
The task will always exist as long as its owner (i.e. the pad) and that
owner's owner (i.e. multiqueue) exist.
Reduces the number of instruction fetches by 36%.
We know whether we have a buffer or an event, use that instead of going
trough the expensive GLib typecheck.
The overall instruction fetch reduction introduced by this commit and the
2 previous commits:
* receiving a buffer (_chain) by 20%
* popping a buffer (_loop) by 14%
Numbers acquired through callgrind passing 100000 buffers through queue.
Pads have their GstSingleQueue stored as element private data
so there's no need to iterate over the list of single queues
every time. Also every pad only has a single internal link so
use a single iterator instead of a complex custom iterator.
Set the element private data of the pad to NULL when freeing the
single queue.
If downstream returns error and upstream has already delivered
everything (including EOS) and will no longer be around to find
out that we paused (and why), post error message. Fixes#589991.
When we have an input buffer with caps and when those caps are different from
the caps we want, only then make a writable copy of the input buffer as the
output buffer and set the caps on that output buffer. This avoids some cases
where we took a subbuffer for setting caps that were the same.
Users should never see the term 'file descriptor', much less a file
descriptor number, in an error message. Put that into the debug
string instead and use the default error message.
The compiler suggests to add some () to indicate if the && or the || takes
priority, so reflow code a bit so we don't have to add yet another layer
of (). Hopefully this was the intended meaning of the code.
When min-threshold is set on a queue, it is possible that one of
the minima remains unsatisfied while one of the maxima is already
reached. Therefore, always consider the queue non-empty if it is full.
Fixes#585433.
Out-of-band events might lead to us calling g_object_notify() from a
non-streaming thread, which can cause crashes if g_object_notify() is
being called from the streaming thread at the same time. See #554460.
GObject may crash if two threads do concurrent g_object_notify() on the same
object. This may happen if fakesink receives an out-of-band event such as
FLUSH_START while processing a buffer or serialised event in the streaming
thread. Since this may happen with the default settings during a common
operation like a seek, and there seems to be little chance of a timely fix
in GObject (see #166020), we should hack around this issue by protecting all
of fakesink's direct g_object_notify() calls with a lock.
Also add unit test for the above.
Fixes#554460.
Original commit message from CVS:
* gst/gstdebugutils.c:
Add some ideas, how to make the graph smaller.
* gst/gstutils.c:
Add a comment from a debug session.
* libs/gst/base/gstbasetransform.c:
Log more context.
* libs/gst/controller/gstinterpolationcontrolsource.c:
Indet.
* plugins/elements/gstcapsfilter.c:
Fix typo in docs.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstquark.c:
* gst/gstquark.h:
* gst/gstquery.c: (gst_query_new_uri), (gst_query_set_uri),
(gst_query_parse_uri):
* gst/gstquery.h:
API: Add URI query type. This is useful to query the URI
of a sink/source element and can be used by demuxers that
need to get data from other files.
This query should go upstream by default.
Fixes bug #562949.
* plugins/elements/gstfdsink.c: (gst_fd_sink_query):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_query):
* plugins/elements/gstfilesink.c: (gst_file_sink_query):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_query):
Implement URI query.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_handle_buffer):
Check for changed pads-list before checking the last returned
GstFlowReturn because the pad could have been removed and we
need to ignore the value in that case.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c:
Use g_filename_from_uri() for URI parsing in filesrc rather than rolling
out own slightly incorrect version. Fixes use of some paths on
win32.
Original commit message from CVS:
* plugins/elements/gstidentity.c:
Doc typo. Use return value of parent_class->event.
* plugins/elements/gsttypefindelement.c:
Chain up at the end for consistency.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_create):
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Use gst_buffer_try_new_and_alloc() and handle errors instead of
using gst_buffer_new_and_alloc() which aborts if the buffer couldn't
be allocated.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_handle_buffer):
Fix flow aggregation of tee. Error out immediately for all flow returns
except OK and NOT_LINKED, return NOT_LINKED if all pads are not linked
and return OK if at least one pad is linked.
Before we errored out on "fatal" flow returns (i.e. not for WRONG_STATE)
and otherwise returned the flow return of the last pad, which is wrong.
* tests/check/elements/tee.c: (_fake_chain), (_fake_chain_error),
(GST_START_TEST), (tee_suite):
Add unit tests for the flow aggregation.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
Don't install static libs for plugins. Fixes#550851 for core.
Original commit message from CVS:
* plugins/elements/gstqueue.c:
Allow through queries when we don't know how
to adjust them (not TIME or BYTES), as otherwise it's
not possible to query the current position in order
to seek in other formats at all.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
* plugins/elements/gstcapsfilter.c:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/capsfilter.c:
Fix assertion in basetransform when the subclass chooses not to
allocate a buffer in prepare_buffer(), and make capsfilter error out
cleanly if requested to apply caps that don't completely specify the
buffer. Fixes#551509
Original commit message from CVS:
reviewed by: Wim Taymans <wim.taymans@collabora.co.uk>
* plugins/elements/gstfakesink.c:
* plugins/elements/gstfakesrc.c:
Call super::event() when not handling it. Fixes#544855.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro@nnva.org>
* plugins/elements/gstfilesrc.c:
Use 64 bit variants of stat functions on win32, to enable support
of large files there.
Fixes#547277.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas at tandberg com>
* plugins/elements/gsttee.c: (gst_tee_finalize), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc):
* plugins/elements/gsttee.h:
Protect pad_alloc with a new lock so that we can be sure that nothing is
performing a pad_alloc when removing the pad. Fixes#547835.
* tests/check/elements/tee.c: (buffer_alloc_harness_setup),
(buffer_alloc_harness_teardown), (app_thread_func),
(final_sinkpad_bufferalloc), (GST_START_TEST), (tee_suite):
Added testcase for shutdown race.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (copy_func),
(gst_capsfilter_set_property):
Use new caps suggestion feature of basetransform to request a caps
negotiation upstream.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/gstreamer.types.in:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_index_func):
* gst/gstconfig.h.in:
* gst/gstelement.c: (gst_element_get_index):
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature),
(gst_registry_binary_read_cache):
* gst/gstregistryxml.c: (load_feature),
(gst_registry_xml_read_cache), (gst_registry_xml_save_feature):
* plugins/Makefile.am:
* tools/gst-indent:
* tools/gst-inspect.c: (print_index_info), (print_element_list),
(print_plugin_features), (print_element_features):
* tools/gst-xmlinspect.c: (print_event_masks),
(print_element_info):
* win32/common/gstconfig.h:
Remove GST_DISABLE_(ENUMTYPES|INDEX|URI) everywhere.
Disabling the indexers and URI handler code will only reduce the
required amount of memory by a very small amount but on the other hand
requires much more maintaince work. Apart from that many places of
code are broken when disabling them.
Disabling the enum types doesn't reduce the required amount of memory
by more than a few bytes and makes it hard to fix bugs like #539772,
i.e. use the enums as GObject properties.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_set_property),
(gst_capsfilter_get_property), (gst_capsfilter_transform_caps):
Make setting the caps more threadsafe.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_acceptcaps):
Add and use a custom acceptcaps function instead of falling back to the
potentially less optimized default implementation.
Original commit message from CVS:
* plugins/elements/gsttee.c:
* plugins/elements/gsttee.h:
Reverting as not everything is clear yet. Needs some general design
work.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
* plugins/elements/gstmultiqueue.h:
revert extra-size-buffers stuff, caused some race conditions
and extra-size-buffers is not used anymore. Docs needs some updates
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
Don't update the cur_time on GST_CLOCK_TIME_NONE (#537804) and don't
activate the pads if they are added in STATE_NULL.
Original commit message from CVS:
Patch by: joel larsson <tilljoel at gmail dot com>
* docs/plugins/gstreamer-plugins.args:
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_update_fd),
(gst_fd_src_set_property), (gst_fd_src_get_property),
(gst_fd_src_create):
* plugins/elements/gstfdsrc.h:
Add timeout property like udpsrc. Fixes#538628.
Add some more docs and example pipelines.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_src_event),
(gst_type_find_element_handle_event):
Use faster and safer _pad_push_event().
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_set_location),
(gst_file_sink_render):
* plugins/elements/gstfilesrc.c: (gst_file_src_set_location),
(gst_file_src_start):
Small cleanups. Add note adbout g_fopen() on windows and why we don't
use it yet.
Original commit message from CVS:
* plugins/elements/gstfakesink.c:
(marshal_VOID__MINIOBJECT_OBJECT), (gst_fake_sink_class_init):
* plugins/elements/gstfakesrc.c: (marshal_VOID__MINIOBJECT_OBJECT),
(gst_fake_src_class_init):
Use custom marshalers that take GstMiniObject as first parameter.
Using OBJECT as parameter while a GstMiniObject is given will lead
to assertions if built with G_ENABLE_DEBUG. Fixes bug #525532.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event),
(gst_type_find_element_send_cached_events),
(gst_type_find_element_change_state):
Clean up on FLUSH_STOP and not FLUSH_START. Forward both events
immediately.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (stop_typefinding),
(gst_type_find_element_handle_event),
(gst_type_find_element_send_cached_events),
(gst_type_find_element_change_state):
Forward FLUSH_START events immediately and clean up instead of
caching them.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
Add documentation for the signals to push our core plugin docs
coverage back up to 100%.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_init), (gst_fake_src_set_property),
(gst_fake_src_get_property), (gst_fake_src_start):
* plugins/elements/gstfakesrc.h:
Added format property to control the format of the newsegment events.
API: GstFakeSrc:format
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_leak_downstream):
Since we're not called only from the chain function any longer,
we can't assume that there's always data in the queue, so move
the is_full check to the beginning of the loop (otherwise we'd
hit the assert when changing the limit properties while the
queue is empty or not running yet).
Also, only set a discont if items were actually removed from
the queue.
* tests/check/elements/queue.c: (test_leaky_downstream):
Test case for the above.
Original commit message from CVS:
Patch by: Jonas Holmberg <jonas dot holmberg at axis dot com>
* plugins/elements/gstqueue.c: (gst_queue_leak_downstream),
(gst_queue_chain), (queue_capacity_change),
(gst_queue_set_property):
When changing thr max capacity of a leaky queue, immediatly drop buffers
instead of waiting for a push on the sinkpad. Fixes#530637.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* plugins/elements/gstqueue.c: (gst_queue_handle_src_query):
Add the min-threshold to the min latency if possible. Fixes#529148.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_event),
(gst_identity_start):
Fix imperfect timestamp/offset checks when we get another NEWSEGMENT
event after processing some data. Fixes bug #526042.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init),
(gst_type_find_element_set_property),
(gst_type_find_element_get_property),
(gst_type_find_element_activate):
* plugins/elements/gsttypefindelement.h:
Cleanup properties.
Fix pad leak when peer query fails.
We can still typefind when the peer returns -1.
Add property to force caps and bypass typefinding. This will be used in
uridecodebin.
API::force-caps
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_prepare_output_buffer):
Identity is not always a passthrough element, it can modify the buffer
timestamps when it has a datarate and operates in single-segment mode.
We therefore make it an in_place filter with a custom buffer prepare
function that conditionally makes the input buffer metadata writable
when needed. Fixes#523985.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render):
* plugins/elements/gstfdsrc.c: (gst_fd_src_create):
Also retry our poll_wait when we get EAGAIN. Fixes#524041.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (single_queue_overrun_cb),
(single_queue_underrun_cb):
When trying to make room in the queue, bump the max allowed buffers
bigger than the current amount of buffers in the queue. this fixes some
nasty deadlocks in multiqueue when dynamically changing the limits of
the queue.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås
<ole dot andre dot ravnas at tandberg dot com>
* docs/gst/gstreamer-sections.txt:
* gst/gstpoll.c: (find_index), (gst_poll_free_winsock_event),
(gst_poll_update_winsock_event_mask), (gst_poll_new),
(gst_poll_free), (gst_poll_fd_init), (gst_poll_add_fd_unlocked),
(gst_poll_remove_fd), (gst_poll_fd_ctl_write),
(gst_poll_fd_ctl_read_unlocked), (gst_poll_fd_has_closed),
(gst_poll_fd_has_error), (gst_poll_fd_can_read_unlocked),
(gst_poll_fd_can_write), (gst_poll_wait),
(gst_poll_set_controllable), (gst_poll_restart),
(gst_poll_set_flushing):
* gst/gstpoll.h:
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_new):
* libs/gst/net/gstnettimeprovider.c: (gst_net_time_provider_start),
(gst_net_time_provider_new):
* plugins/elements/gstfdsink.c: (gst_fd_sink_start):
* plugins/elements/gstfdsrc.c: (gst_fd_src_start):
* tests/benchmarks/gstpollstress.c: (main):
* tests/check/gst/gstpoll.c: (GST_START_TEST), (gst_poll_suite):
Remove GstPollMode from the API, it does not make sense to let the
application control this.
Add support for Win32.
Fix the testsuite. Fixes#520671.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_update_fd):
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Don't reset GstPollFDs, this is not necessary at all.
* tests/check/gst/gstpoll.c: (test_poll_wait), (GST_START_TEST),
(delayed_restart), (delayed_control):
Use GST_POLL_FD_INIT.
Original commit message from CVS:
* gst/gstpoll.c: (gst_poll_fd_init):
* gst/gstpoll.h:
Added Since tags.
* plugins/elements/gstfdsink.c: (gst_fd_sink_update_fd):
Use some more init macros.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_start):
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Use init macros and functions.
Original commit message from CVS:
* plugins/elements/gstqueue.c:
* plugins/elements/gstqueue.h:
When dropping buffers in leaky modes, mark next buffers we sent as
DISCONT.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_map_region):
Also, if mmap() fails that would be a READ error, not OPEN_READ.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/elements/gstbufferstore.c:
* plugins/elements/gstbufferstore.h:
* plugins/elements/gsttypefindelement.h:
Remove GstBufferStore, no idea why we were still building it.
It's not used anywhere and superseded by GstAdapter.
* plugins/elements/gstfilesrc.c: (gst_file_src_map_region),
(gst_file_src_create_mmap):
* plugins/indexers/gstfileindex.c: (gst_file_index_add_association):
Printf format fixes for 64-bit integers.
Original commit message from CVS:
* gst/gstconfig.h.in:
Add 'id' for example.
* gst/gstpad.c:
* gst/gstutils.c:
* plugins/elements/gstfdsink.c:
Link to signals. Doc and comment fixes.
Original commit message from CVS:
* docs/design/part-synchronisation.txt:
Update some docs.
* docs/plugins/Makefile.am:
* docs/plugins/gstreamer-plugins-docs.sgml:
* docs/plugins/gstreamer-plugins-sections.txt:
* plugins/elements/gstmultiqueue.c:
Add multiqueue to the docs.
Original commit message from CVS:
Based on Patch by: Laurent Glayal <spglegle at yahoo dot fr>
* configure.ac:
Check for stdio_ext.h for the filesink changes.
* plugins/elements/gstfilesink.c: (buffer_mode_get_type),
(gst_file_sink_class_init), (gst_file_sink_init),
(gst_file_sink_dispose), (gst_file_sink_set_property),
(gst_file_sink_get_property), (gst_file_sink_open_file),
(gst_file_sink_close_file):
* plugins/elements/gstfilesink.h:
Add two properties to control the buffering mode and size.
API: GstFileSink::buffer-mode
API: GstFileSink::buffer-size
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_event):
Be a bit smarter when seeking, like, don't try to do a seek when it's
not needed. This avoids errors when the file is not seekable.
Fixes#499771.
Original commit message from CVS:
* docs/faq/developing.xml:
Add a question about how to submit new translations.
* docs/random/release:
Update the contact email address for the Translation Project
* plugins/elements/gstfdsrc.c:
The parent_class for fdsrc is pushsrc, not GstElement.
Original commit message from CVS:
* gst/gstpreset.c:
Add some comments and TODOs.
* gst/gstpreset.h:
Add padding for future changes.
* plugins/elements/gstqueue.c:
Implement the iface.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event),
(gst_type_find_element_activate):
Post special error message if we can't determine the type of a stream
because it's empty.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_set_property),
(gst_multi_queue_request_new_pad), (gst_single_queue_flush),
(gst_multi_queue_loop), (gst_multi_queue_sink_activate_push):
Make it so that pads are considered linked until a buffer is pushed
and discovered otherwise. This avoids problems with decodebin2 hanging
after a seek in the filesrc ! decodebin2 name=d ! fakesink d. ! fakesink
case.
Make sure we lock the multiqueue when updating the max-size properties.
Fix a crash on Solaris in a debug statement in get_request_pad that
passes a NULL string to GST_DEBUG.
* tests/check/elements/multiqueue.c: (mq_dummypad_chain),
(run_output_order_test):
Fix the test to allow the first buffer on not-linked pads to come out
of sequence while multiqueue discovers that they are not-linked.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_single_queue_new):
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_push_one):
Fix queue negotiation. If acceptcaps unconditionally returns TRUE,
upstream is tricked into thinking it can suggest a format downstream
while downstream does not support that format. The real problem is that
core calls acceptcaps when pushing a buffer with new caps, for which we
do a little workaround by setting the caps on the srcpad ourselves
before pushing the buffer (until this is figured out). Fixes#486758.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_have_type), (gst_type_find_element_init),
(gst_type_find_element_setcaps), (gst_type_find_element_chain):
Move detecting the input caps of the sinkpad to the setcaps function.
This allows us to update the output caps when we receive new input caps
instead of always using the first detected caps.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_locked_enqueue),
(gst_queue_locked_dequeue):
Comment the segment-related code... in the PROPER function.
See #482147 and my commit from yesterday.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_locked_dequeue):
Disable code that's breaking the current-time-level reporting.
See #482147
Original commit message from CVS:
Patch by: Felipe Contreras <felipe dot contreras at gmail dot com>
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
First patch of code cleanups, use the macros and right arguments in the
macros to signal and lock the queue. See #480858.
Original commit message from CVS:
* plugins/elements/gstfakesink.c:
Add some debug text to error message to indicate that
we errored out on request.
* tools/gst-launch.c:
When the state change to PLAYING fails, check for an
error message on the bus and print it.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (apply_buffer),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue):
Measure queue level based on the diff between head and tail timestamps
even when pushing the first buffer.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_locked_enqueue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_handle_src_query),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push):
* plugins/elements/gstqueue.h:
When downstream returns UNEXPECTED from pushing a buffer, don't try to
push more buffers but allow pushing of EOS and NEWSEGMENT.
Add some more debug info here and there. Fixes#476514.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_handle_src_query):
Queue can latency to the pipeline up to the configured max size in time.
Report this fact in the latency query.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More thoughs on this.
* plugins/elements/gstcapsfilter.c:
Add bugzilla ticket number to FIXME comment.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_transform_size), (gst_capsfilter_prepare_buf):
Fix capsfilter for cases where the caps set on capsfilter will provide
additional information.
Fixes#449197
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_get_internal_links), (apply_buffer),
(single_queue_overrun_cb), (gst_single_queue_new):
Implement non-default GstPadIntLinkFunction for multiqueue pads so that
the pipeline layout can be tracked correctly. Fixes#453732.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_base_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc),
(gst_tee_do_push), (clear_pads), (gst_tee_handle_buffer),
(gst_tee_chain):
Be a lot smarter when deciding what srcpad to use for proxying
the buffer_alloc. Also handle pad added/removed when doing so.
Fixes#357959.
Keep track of what pads we already pushed on in case we have pads
added/removed while pushing. Fixes#374639
* tests/check/Makefile.am:
* tests/check/elements/tee.c: (handoff), (GST_START_TEST),
(tee_suite):
Added unit test for pad resync.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(single_queue_overrun_cb):
When figuring out when a queue is filled, use our internal time estimate
based on segments, just like check_full does.
Original commit message from CVS:
Patch by: Tim Angus <tim at ngus dot net>
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_set_property):
Take a reference instead of a copy when setting "caps".
Fix documentation to clarify this behaviour. Fixes#449414.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_single_queue_flush), (apply_segment), (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_loop),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_src_activate_push), (wake_up_next_non_linked),
(compute_high_id), (gst_single_queue_new):
* plugins/elements/gstmultiqueue.h:
Take the multiqueue lock when updating the fill level so we don't get
confused.
After applying a buffer or event on the src pad segment, make sure to
call gst_data_queue_limits_changed() to get the data queue to unblock
and check the filled state again.
Rework the not-linked pad handling so the logic is that not-linked
pads can push as fast as they like, but only so they never get
ahead of any linked pads.
* tests/check/elements/multiqueue.c: (mq_sinkpad_to_srcpad),
(mq_dummypad_getcaps), (mq_dummypad_chain), (mq_dummypad_event),
(run_output_order_test), (GST_START_TEST), (multiqueue_suite):
Add a test to check that not-linked pads always stay behind
linked pads.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
Make sure we don't reference the buffer/event after we have given away
ownership in the queue.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_flush),
(gst_multi_queue_chain), (gst_multi_queue_sink_event):
Update queue state _after_ adding the item in the queue because else we
could end up being full without the element added yet.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_item_destroy),
(gst_multi_queue_item_new):
Don't use GSlice because we don't depend on >= 2.10 yet.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_class_init):
Fix signal signature.
* gst/gstsegment.c:
Add small clarification in the api docs.
* plugins/elements/gstfilesrc.c: (gst_file_src_set_location):
States are protected with object lock.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/elements/gstmultiqueue.h:
* plugins/elements/gstqueue.h:
These are not installed headers, no need for padding.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_query), (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Fix position reporting; rename data_written member to current_pos to
reflect its real meaning (fixes#412648).
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_loop):
Hello, I am Mr Taymans' personal debugger. Today I will introduce a fix
for the subtle art of warning a potentially blocking thread that it
should check the source pad return value, and relay the information
upstream.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_finalize), (update_time_level), (apply_segment),
(apply_buffer), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Refactor an cleanup queue a bit.
Do better time level calculations that also work when the srcpad is not
yet running.
Remove some unneeded debug lines.
* tests/check/elements/queue.c: (GST_START_TEST), (queue_suite):
Added testcase for time level measurement.
Try to make some stuff more racefree.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(update_time_level), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Be smarter when calculating the current amount of data in the queue by
measuring the difference between start and end timestamps (in running
time) inside the queue. Fixes#432876.
API: GstQueue::pushing to notify elements that we are pushing data again
since the running signal is rather broken for this purpose.
Original commit message from CVS:
* plugins/elements/gstqueue.c (_do_init, gst_queue_signals,
gst_queue_base_init, gst_queue_init):
use GST_BOILERPLATE
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Set the location to NULL if "file://" is set as URI. Otherwise
some random previous URI would still be set if "file://" is
set on an already used filesink/filesrc.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Special case the "file://" URI as as this is used by some
applications to test with gst_element_make_from_uri if there's
an element that supports the URI protocol.
Also move the g_path_is_absolute() check for the location part
of the URI to also check this for "file://localhost/bla" URIs.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_release_pad):
Don't deadlock when releasing a pad - gst_pad_set_active may try
and take the multiqueue lock too.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_release_pad):
Deactivate pads and free GstSingleQueue with gst_single_queue_free()
when releasing sink pad. Fixes#425400.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
Original commit message from CVS:
* plugins/elements/gstidentity.c (gst_identity_check_imperfect_offset):
So we should use correct constants for checking for None offset.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_finalize),
(gst_single_queue_free):
Fix small leak (free GstSingleQueue structure too, not only contents).
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_check_perfect),
(gst_identity_check_imperfect_timestamp),
(gst_identity_check_imperfect_offset), (gst_identity_transform_ip),
(gst_identity_set_property), (gst_identity_get_property):
* plugins/elements/gstidentity.h:
Separate out check-imperfect-timestamp and check-imperfect-offset.
Put back check-perfect as it was to keep compatibility.
Original commit message from CVS:
2007-03-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Fix check for perfect stream to ignore buffers with -1
offsets/offset ends when checking data contiguity.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Only post bus message at max, once per buffer received.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Rename non-perfect to imperfect for Mike and for the sanctity of
the language.
Also make sure bus message gets emitted for data-incontiguities.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect),
(gst_identity_start):
* plugins/elements/gstidentity.h:
Emit bus message if check-perfect is true and we encounter a
non-perfect stream between 2 consecutive buffers.
Fixes#415394.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Also check for an absolute path following file:// in the filesrc
element. Remove redundant check and call g_path_is_absolute() on the
unescaped location.
Original commit message from CVS:
* gst/gstbin.h:(gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Replace interface parameter name by iface as interface is
a reserved keyword in Visual Studio for C++ projects so it removes
a build error for application developpers using VS.
* plugins/elements/gstfilesrc.c:(gst_file_src_uri_set_uri):
Fix a bug on Windows in uri format check. Now the prefix checked
is file:// and next we check if the path after file:// is absolute.
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libgstgstreamer.def:
Add new exported functions.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Correctly generate EOS for non-seekable files. We don't have a total
length for them and would get an unexpected end of file if we only
special-cased for regular files. (Fixes: #404569)
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Allow file://localhost/foo/bar URLs and correctly fail for every other
hostname that one sets. This was gnomevfssrc is linked for those if
installed as it can handle it (#403172)
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain_do_typefinding),
(gst_type_find_element_change_state):
Don't leak found caps in chain function (no idea why that never
showed up as a leak anywhere).
Original commit message from CVS:
Patch by: Jindrich Makovicka <jindrich.makovick at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
If not using mmap'ed files try to seek to the end instead of the
start to determine whether we can seek at all. This fixes the case
of 2GB+ files over NFS, where seeks in the first 2GB can succeed but
seeks for everything afterwards fail. Fixes#400656
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_loop):
Small fix.
(single_queue_overrun_cb), (single_queue_underrun_cb),
(single_queue_check_full), (gst_single_queue_new):
Implement single queue growth system.
This uses the extra-size properties, and will grow single queues by
that much if one goes full whereas there are others empty. This is
called extra-mode in the code.
When a single queue's levels go back below the initial max-size
limits, it is no longer in extra-mode. This is to ensure we don't
consume too much memory.
Fixes#399875
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_src_activate_push), (gst_single_queue_new):
Remove previous hack of unsetting the flushing flag for the source pad
instead of activating it. Instead, fix the source pad activate function
so that it no longer depends on having a parent set or not.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_new):
When dynamically creating single queues, activate sinkpad before adding
it.
We should be doing the same thing for the source pad, but we can't
since it would call a method which needs the parent to be set in order
to work propertly. Instead of activating the source pad, we just unset
the flushing flag, which is the minimal requirement for adding a pad
to an element in a state greater than READY.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c:
Use g_random_int_range(), since it produces better random
numbers in a range than almost-correct floating point code.
Original commit message from CVS:
* gst/gst.c:
Docs typo fix.
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(gst_queue_init):
Fix incorrect documentation and flesh it out a bit more.
Set default values for the max properties on the GParamSpec as well,
so it shows up correctly in gst-inspect.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Print additional debug info when the stream isn't perfectly
timestamped; don't try to use invalid durations.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* plugins/elements/gstfdsrc.c: (gst_fd_src_create):
Another printf fix (#371493).
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd),
(gst_fd_src_create):
Add some debugging.
Only update fd when it's different from the old.
Original commit message from CVS:
Based on patch by: Jan David Mol <j.j.d.mol at tudelft nl>
* plugins/elements/gstfilesink.c: (gst_file_sink_class_init):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_map_small_region), (gst_file_src_create_mmap):
Printf fixes for gsize parameters on PPC/OSX (#369366). Also,
don't cast to long long for portability reasons, but use
GLib's types instead.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Get the arguments to lseek() the right way around.
Fixes 367677.
Original commit message from CVS:
* docs/plugins/gstreamer-plugins.args:
* docs/plugins/inspect/plugin-coreelements.xml:
* docs/plugins/inspect/plugin-coreindexers.xml:
Update element args.
* gst/gstsystemclock.c:
Small comment update.
* plugins/elements/gsttee.c: (gst_tee_class_init), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_buffer_alloc), (gst_tee_sink_activate_push),
(gst_tee_sink_activate_pull):
* plugins/elements/gsttee.h:
Some tee loving:
Add default property defines.
Implement release pad function.
Give properties better blubs etc.
Activate pads before adding them to a running tee.
Do simple buffer_alloc on the first requested pad.
Post error when activation fails.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* plugins/elements/gstqueue.c: (gst_queue_chain):
Recheck queue filledness after signalling the overrun when we're about
to leak downstream because we released the lock when emitting the signal
and the queue could be empty again. Fixes#352345.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_event),
(gst_file_sink_render):
Add some FIXME for the NEWSEGMENT handling.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_init),
(gst_file_sink_set_location), (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_event),
(gst_file_sink_render):
Set file to NULL when closing filesink so that we can set a new filename
in READY. Fixes#358613.
Original commit message from CVS:
* docs/pwg/building-boiler.xml:
* plugins/elements/gstcapsfilter.c:
More G_OBJECT macro fixing. Also Fix some details on the plugin-stamp
section.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Revert previous change; I misunderstood single-segment mode.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Unset DISCONT on buffers when using single-segment mode.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Small comment update.
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_transform_ip):
Drop-probability is broken, mention this in the code with a
FIXME and also in the property description.
Make silent also be silent about the drop messages.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Requesting 0 bytes before the end of the file should result in
FLOW_OK and an empty buffer, not FLOW_UNEXPECTED. Thank you
unit test.
Original commit message from CVS:
* gst/gstcaps.c: (gst_static_caps_get), (gst_caps_get_structure):
Fix useless assert, a uint is always positive.
* gst/gststructure.c: (gst_structure_nth_field_name),
(gst_structure_foreach), (gst_structure_map_in_place):
Check input arguments for public functions to avoid obvious crashes.
* plugins/elements/gstfakesink.c: (gst_fake_sink_render):
* plugins/elements/gstfakesink.h:
Do less useless typechecking.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init):
Do not use mmap() by default since there are a number of error
conditions that we would like to handle in a non-fatal way that
will result in a SIGBUS if we use mmap(). Examples: external
devices (USB harddrive, portable music player) being unplugged
while in use; file on mounted CD/DVD that can't be read because
the medium is partly damaged. Fixes#348455 and #348475.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_get_type), (gst_buffer_new),
(gst_subbuffer_get_type), (gst_buffer_create_sub):
Avoid function call for known types by keeping the buffer and
subbuffer GType global.
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Random silly optimisations in read() path.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_set_property):
Remove superfluous g_object_notify() calls, GObject does
that for us automatically.
Original commit message from CVS:
* gst/gstminiobject.c:
update docs
* plugins/elements/gstfdsrc.c: (gst_fd_src_set_property),
(gst_fd_src_create):
log recurring events at LOG level
add more debug for when the fd gets set
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_map_region):
* plugins/elements/gstfilesrc.h:
Add "sequential" property, off by default, to use madvise and hint
to the kernel that sequential access is desired.
Touch all retrieved pages by default to ensure they are pulled
into memory. (Closes#345720)
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_do_seek),
(gst_file_sink_event), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Check if we can seek in the file instead of assuming
we always can. Post an error when we are asked to seek in a
non-seekable file (like a fifo). Fixes#343312.
Some cleanups.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_start):
* plugins/elements/gstfilesrc.h:
Add a use-mmap property to enable easier testing of all code paths.
Bump rank to PRIMARY, so filesrc is the preferred file reader and used
in the absence of gnomevfssrc. (Closes#340501)
Original commit message from CVS:
Patch by: Julien Moutte <julien at moutte net>
* docs/gst/gstreamer-sections.txt:
Make new GST_FLOW_IS_SUCCESS macro visible in docs.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_preroll):
* plugins/elements/gstfakesink.h:
Add new ::preroll-handoff signal (#337100).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
The caps intersection algorithm can produce multiple copies of the
caps. Until that is fixed, we need to simplify the result to be
sure whether the allowed caps are fixed or not.
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_bufferalloc), (gst_queue_acceptcaps),
(gst_queue_push_one):
Proxied buffer alloc should not set the caps on the source pad.
When pushing buffers, we always accept the caps change that triggers.
This prevents negotiation errors caused by caps changing mid-stream
and then being refused on our source pad (because upstream is now
refusing those caps).
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue is not responsible for pushing an EOS when receiving a fatal
flow error. It's up to the real element driving the pipeline to do that.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue was posting a non-needed GST_MESSAGE_ERROR when pushing a
buffer returned a fatal error. It should just send an EOS and stop
it's task.
Upstream elements will then properly receive the GST_FLOW_UNEXPECTED
when pushing buffers on the queue and will be able to handle the event.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_chain), (gst_queue_loop),
(gst_queue_set_property):
Don't forget to signal the _chain or _loop function
when the queue size or thresholds change since that might
cause them to make progres again.
Original commit message from CVS:
Patch by: James Andrewartha <trs80 at tartarus uwa edu au>
* gst/gst.c:
* gst/gstbus.c:
* gst/gstclock.c:
* gst/gstevent.c:
* gst/gstformat.c:
* gst/gstmessage.c:
* gst/gstparse.c:
* gst/gstquery.c:
* gst/gstutils.c:
* gst/parse/Makefile.am:
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstpushsrc.c:
* libs/gst/base/gsttypefindhelper.c:
* plugins/elements/gstfakesrc.c:
* plugins/elements/gstidentity.c:
Make sure gstprivate.h and/or config.h are
always included first, otherwise some of our
defines (like _FILE_OFFSET_BITS) might be
redefined in the system headers. Fixes build
on opensolaris (#340016).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
reverted wrong change and reflowed code to avoid others falling into
this trap
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
If we get EOS before any data is accumulated, don't use
uninitialised local variables.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render),
(gst_fd_sink_check_fd), (gst_fd_sink_update_fd):
handle EAGAIN, EINTR and short writes correctly. Also clean
up some error cases, avoid a deadlock on bad file descriptors and
use GST_DEBUG_OBJECT.
Fixes#339843
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* plugins/elements/gstfilesink.c: (gst_file_sink_render):
Don't error out on empty buffers (#336945).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
More debug info; when skipping typefinding, send cached
events in all cases.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
Do not typefind content if the buffers already have caps.
Neccesary for icydemux (#333657), and the right thing to do anyway.
Original commit message from CVS:
Patch by Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_locked_flush), (gst_queue_handle_sink_event),
(gst_queue_set_property):
* plugins/elements/gstqueue.h:
In queue, when EOS is received, if minimum threshold > max_size -
current_level, there is chance that queue blocks forever in conditional item
del wait. This is because the queue is not emptied completely due to minimum
threshold.
Here is another approach. Instead of setting cur_levels to max in EOS, just
zero all minimum threshold levels. This should make sure that queue gives out
all data. When going to READY (stop) state, just reset the original minimum
threshold levels.
Fixes#336336.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (stop_typefinding),
(gst_type_find_element_handle_event),
(gst_type_find_element_send_cached_events),
(gst_type_find_element_change_state):
* plugins/elements/gsttypefindelement.h:
When typefinding is done in push mode, we should cache
events we receive during typefinding instead of just
dropping them (e.g. newsegment, custom events from
dvdreadsrc etc.) and then send them out once we've
determined the type of the stream (and decodebin
has had a chance to plug in a decoder/demuxer).
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render):
* plugins/elements/gstfilesink.c: (gst_file_sink_render):
Emit RESOURCE_NO_SPACE_LEFT error here as well when
there's no space left on the device.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.h:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_src_event), (start_typefinding),
(stop_typefinding), (gst_type_find_element_handle_event),
(gst_type_find_element_chain),
(gst_type_find_element_chain_do_typefinding):
Use gst_type_find_helper_for_buffer() for chain-based
typefinding.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init),
(gst_type_find_element_set_property),
(gst_type_find_element_get_property):
Deprecate "maximum" property (not only was it only taken into
account for typefinding in push-mode anyway, it also was never
actually possible to set it in the first place because the
property was registered with the numeric property ID for the
"minimum" property). Register "maximum" property correctly,
for the sake of future copy'n'pasters. Remove some cruft
from property get/set functions.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_type_find_helper_get_range() here, so we
can honour the min-probability property and also emit
the signal with the correct probability of the found caps.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
When we get an EOS event and have not found a type yet
(most likely because we had not yet accumulated
TYPE_FIND_MIN_SIZE of data yet), try to determine the
type given the data we have so far. Fixes typefinding
for very short streams again, most notably quicktime
redirections as used on Apple's trailer site (#331701).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_pad_check_pull_range() before _activate_pull()
to avoid unnecessary open/close (see #331690).
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Update src->read_position after a seek when not using mmap.
Fixes#332277, patch by: Renchi Raju <renchi gmail com>
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek):
We can do peeks at non-zero offsets, as long as they
fall within the buffer we have.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
When typefinding is unsuccessful in the chain function, don't
error out immediately. Only error out with NO_CAPS_FOUND if
the amount of data is at least MAX_TYPEFIND_SIZE bytes,
otherwise simply wait for more data so we can try typefinding
again with more data later. Also, don't attempt to typefind
if we have less than MIN_TYPEFIND_SIZE data available. Overall,
this should improve typefinding from network sources where the
size of the first buffer can be somewhat random.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Post TYPE_NOT_FOUND error message when typefinding
is unsuccessful in the activate function as well.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_do_push),
(gst_tee_handle_buffer):
Always prefer an actual return value from a src
pad in place of NOT_LINKED. This means we return
WRONG_STATE when all src pads are WRONG_STATE
instead of NOT_LINKED.
Lock when replacing the last message to prevent
racing with the get_property method.
Add debug output
Original commit message from CVS:
2006-01-26 Julien MOUTTE <julien@moutte.net>
* plugins/elements/gsttee.c: (gst_tee_do_push),
(gst_tee_handle_buffer): Apply patch from #328715. Tee now
handles pad being NOT_LINKED or in WRONG_STATE.
Original commit message from CVS:
* gst/gstevent.c:
Fix docs typo
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_push_one), (gst_queue_loop):
Do some refactoring. Doesn't actually change functionality,
but makes landing the DRAIN event easier later.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init):
'have-type' signal needs to be G_SIGNAL_RUN_FIRST, as it is the
object method handler that sets the caps on the pad and we want
that to happen before we emit the signal (fixes e.g. feeding a
plain text file to decodebin).
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
(Missed plugins/elements/gstcapsfilter.c in previous commit)
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Set the buffer offset/offset_end to GST_CLOCK_TIME_NONE when using
the single-segment mode.
Original commit message from CVS:
* gst/gst.c: (init_post):
Init tags stuff and some other things before loading
any static plugins (there may be other static plugins
than just the GStreamer ones, and they may want to
register their own tags or formats or whatever, and
preferably without segfaulting).
* plugins/elements/gstqueue.c: (gst_queue_handle_src_query):
Print at least a warning in the debug logs if we drop a
query just because we don't know how to adjust the value
in the particular format.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (stop_typefinding):
Catch the special case where we are operating chain-based,
but the downstream peer pad has no chain function. Emit a
custom error message in this case instead of letting the
core generate one implying that this is some sort of core
bug. It's not, it just means that whatever got plugged
into the pipeline downstream when we announced the type
can only operate pull-based, while our source can only
operate push-based (e.g. http://foo/bar.mov ! qtdemux ! ...)
Error string has not been marked for translation yet, as
it probably needs some more work first.
(gst_type_find_element_get_best_possibility):
Add helper function to find the best of all available
found possibilities that qualify given the min. threshold.
(gst_type_find_element_handle_event):
Fix the case where we get an EOS while still in TYPEFIND
mode (we want to chose the best of all possible types,
not just the first type that happens to be in our unsorted
list of possible types).
(gst_type_find_element_chain):
Make sure we return GST_FLOW_ERROR when we errored out
in stop_typefinding(); also, don't just find the best of
all found type entries and then use the last examined
type entry, but actually use the best entry.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (free_entry),
(gst_type_find_element_chain):
Now that we're not leaking factories, make sure we keep references
to them while we need them.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek),
(gst_type_find_element_chain):
Fix leaking element factories in typefinding.
Fix problem where we forgot about a probable type on non-seekable
files, and thus later mis-typefound it.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
document core plugins in a separate document just like all the
others
rename these plugins to something starting with core
Original commit message from CVS:
* gst/gst.c:
* plugins/elements/Makefile.am:
* plugins/elements/gstelements.c:
* plugins/elements/gstqueue.c:
move queue from core to the elements plugin
ç
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* plugins/elements/Makefile.am:
* plugins/elements/gstcapsfilter.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
* plugins/elements/gstidentity.c:
* plugins/indexers/Makefile.am:
do CVS surgery and related build fixery to move elements
and indexers in a new gstreamer/plugins directory, out of the
gst/ directory
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_change_state):
Properly handle non GST_FORMAT_TIME segment
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Properly handle non GST_FORMAT_TIME segment
* gst/gstsegment.c:
This function is valid if the accumulator is 0 and the format
is different from the requested format.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
* Makefile.am:
don't run checks if we don't have check
* common/check.mak:
remove the registry when running make torture
* docs/gst/gstreamer-sections.txt:
remove second multiply
* gst/gstqueue.c: (gst_queue_loop):
fix a compile warning when disabling debug
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/base/Makefile.am:
* gst/check/Makefile.am:
* gst/elements/Makefile.am:
* gst/net/Makefile.am:
update LDFLAGS use some more
Original commit message from CVS:
* gst/elements/Makefile.am:
* gst/elements/gstfakesink.c: (gst_fake_sink_state_error_get_type):
* gst/elements/gstfakesrc.c: (gst_fake_src_data_get_type),
(gst_fake_src_sizetype_get_type), (gst_fake_src_filltype_get_type),
(gst_fake_src_init), (gst_fake_src_prepare_buffer),
(gst_fake_src_alloc_buffer), (gst_fake_src_get_size):
* gst/elements/gstfakesrc.h:
* gst/gstqueue.c: (queue_leaky_get_type):
correctly fix GEnumValues so that nick is the short lowercase
dashed tag
* tools/gst-inspect.c: (print_element_properties_info):
also show the nick, since it's useful to use from parse_launch
syntax
Fixes#322139
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
* gst/elements/gstfdsrc.c: (_do_init), (gst_fdsrc_class_init),
(gst_fdsrc_init), (gst_fdsrc_dispose), (gst_fdsrc_set_property),
(gst_fdsrc_uri_get_type), (gst_fdsrc_uri_get_protocols),
(gst_fdsrc_uri_get_uri), (gst_fdsrc_uri_set_uri),
(gst_fdsrc_uri_handler_init):
* gst/elements/gstfdsrc.h:
Port fd:// URI handler from 0.8 to fdsrc
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_new_from_static_template):
* gst/gstpad.h:
add gst_pad_new_from_static_template functions
* gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
* gst/elements/gsttee.c: (gst_tee_init):
and use them
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init):
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Free pad templates, fixes a couple of leaks.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
0 segment values are 0 in any format.
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/base/gstbasetransform.h:
Parse newsegment correctly in basetransform
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Sync to clock using updated segment values.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfakesrc.c (gst_fake_src_create): It's not an
error if the user selected "no clock" as the clocking method.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): New test for buffer
timestamps with live capture.
* gst/elements/gstfakesrc.c (gst_fake_src_create): If the datarate
is 0 but we are a live source, timestamp the buffers using the
element's clock.
Original commit message from CVS:
2005-11-09 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfilesink.c (gst_file_sink_start)
(gst_file_sink_stop): New functions, replace the state change
handler.
(gst_file_sink_class_init): Hook up the start and stop functions.
(gst_file_sink_base_init): Don't set the state change handler any
more. It was a bit ugly too, being set from here...
(gst_file_sink_get_property, gst_file_sink_set_property):
Cleanups...
(gst_file_sink_set_location): More robust check that doesn't call
GST_STATE. Ugggggg.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_class_init):
Fix some typos.
* gst/gstqueue.c: (gst_queue_loop):
Don't assume a miniobject that isn't a buffer is an
event (it could be that there is a refcounting
problem somewhere and the pointer is stale and
refers to an already destroyed miniobject).
Original commit message from CVS:
* docs/manual/advanced-position.xml:
Update seek example and explanations to current 0.9 API.
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Remove FIXME comment now that the found caps
are unreffed.
Original commit message from CVS:
2005-10-31 Andy Wingo <wingo@pobox.com>
* Boo!
* gst/gstqueue.c (gst_queue_chain): Fix downstream leaky mode.
* gst/gstobject.c (gst_object_dispatch_properties_changed): No
need to serialize property notifications on GLib 2.8. GLib 2.6 has
the possibility of deadlocks here if code calling notify() or
set() has a lock that can be taken in another notify handler (ABBA
with class lock and e.g. python GIL state lock).
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init):
Don't leak class.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_loop):
An EOS event marks the queue as completely filled.
Original commit message from CVS:
* gst/gstbus.c:
Doc fix.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop):
Fix potential deadlock when QUEUE_LOCK is taken before STREAM_LOCK.
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
Use fseeko() and ftello() if available. When falling back on
lseek() to get the current offset, fflush() first to make sure
everything is up-to-date and we get the right offset.
Original commit message from CVS:
* docs/design/part-segments.txt:
More docs.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Correctly set caps, even on the subbufer.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_query), (do_playing):
* gst/base/gstbasesrc.c: (gst_base_src_query):
* gst/elements/gstfilesink.c: (gst_file_sink_query):
* gst/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (find_element_get_length),
(gst_type_find_element_activate):
API change fix.
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_set_segment),
(gst_query_parse_segment):
* gst/gstquery.h:
Bundling query position/duration is not a good idea since duration
does not change much and we don't want to recalculate it for every
position query, so they are separated again..
Base value in segment query is not needed.
* gst/gstqueue.c: (gst_queue_handle_src_query):
* gst/gstutils.c: (gst_element_query_position),
(gst_element_query_duration), (gst_pad_query_position),
(gst_pad_query_duration):
* gst/gstutils.h:
Updates for query API change.
Added some docs here and there.
Original commit message from CVS:
* configure.ac:
correctly make conditionals
* gst/elements/Makefile.am:
* gst/elements/gstelements.c:
fix typo causing fdsrc not to build
Original commit message from CVS:
* configure.ac:
check for some headers
* gst/elements/Makefile.am:
* gst/elements/gstelements.c:
don't compile fdsrc without sys/socket.h
* gst/indexers/Makefile.am:
* gst/indexers/gstindexers.c: (plugin_init):
don't compile fileindex without mmap
Original commit message from CVS:
* gst/elements/gstfakesink.c: (gst_fake_sink_render):
* gst/elements/gstfakesrc.c: (gst_fake_src_create):
Beautify 'last-message' output: print 'none' for buffer timestamps
and durations if none is set; improve alignment with next messages.
Original commit message from CVS:
* gst/elements/gstfakesrc.h:
* gst/elements/gstfilesrc.c: (gst_file_src_create_read):
* gst/elements/gsttypefindelement.c:
fix some signedness
* gst/elements/gstfilesink.c: (gst_file_sink_render):
I wonder if this could actually write +2GB files before
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_event), (gst_file_sink_render):
Flush before seeking.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_buffer):
* gst/elements/gstfilesink.c: (gst_file_sink_event),
(gst_file_sink_render):
Some more debugging info.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
No need to prerol after receiving EOS.
* gst/elements/gstfakesink.c: (gst_fake_sink_event):
* gst/elements/gstfakesrc.c: (gst_fake_src_event_handler):
* gst/elements/gstidentity.c: (gst_identity_event):
Print events more verbosely.
Original commit message from CVS:
* check/gst/gstevent.c: (GST_START_TEST):
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesrc.c: (gst_base_src_default_newsegment):
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Added extra flag to newsegment for future API freeze.
Updated check and base elements.
Original commit message from CVS:
* gst/elements/gsttee.c: (gst_tee_do_push), (gst_tee_handle_buffer):
Let's not iterate pads we're not interested in, it avoids getting
sky-high refcounts on sinkpad.
Original commit message from CVS:
2005-09-28 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_base_src_unlock): Comment a bit in
lieu of real docs...
* gst/elements/gstfdsrc.c: Cleaned up a bit.
Original commit message from CVS:
* gst/elements/gsttee.c: (gst_tee_init), (gst_tee_do_push):
* gst/gstutils.c: (intersect_caps_func), (gst_pad_proxy_getcaps),
(link_fold_func), (gst_pad_proxy_setcaps):
Leak fixes, the fold functions need to unref the passed object and
_get_parent_*() returns ref to parent.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init):
Make sync property settable from subclass.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Set sync to FALSE by default.
Original commit message from CVS:
* check/gst/gstevent.c:
* gst/elements/gstfakesink.c:
* gst/elements/gstfakesink.h:
remove the sync property from fakesink.
has the side effect of setting sync TRUE
for fakesink, which is a change. Anyone who knows how
to fix this nicely in a GObject-y way, feel free.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST), (states_suite):
Add a sleep to ensure elements have a chance to start their
pad tasks before shutdown. Reduces racy test results.
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Time out the select every now and then to check for shutdown.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_prepare_output_buf),
(gst_base_transform_handle_buffer):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
Remove the requirement for sub-classes to call the parent
implementation of prepare_output_buffer with a wrapper function.
* gst/gsttaglist.h:
* gst/gsttagsetter.h:
Fix #define wrapper
Original commit message from CVS:
* check/gst-libs/controller.c:
Header include fix.
* gst/base/gstbasetransform.c:
(gst_base_transform_default_prepare_buf),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
Some more basetransform changes and fixes to enable sub-classes
that modify buffer metadata only.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_init), (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
If the output pad has fixed allowed caps and input buffers
don't have any, set the fixed caps on outgoing buffers.
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
Original commit message from CVS:
Various fixes for unseekable, unmmapable, and non-normal files, so that
fallback to read() rather than mmap() works.
Allow newsegment events with start == end, so that cases where that's
correct work (e.g. filesrc on a zero-size file).
Original commit message from CVS:
add a source plugin description field, to represent the source
module this plugin is a part of. By default GST_PLUGIN_DEFINE
will set it to PACKAGE, which is automake's idea of the name of
the source project.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_pad_buffer_alloc):
Add comment.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Make state change function thread-safe.
* gst/gstpad.c: (gst_pad_alloc_buffer):
Set offset on generic buffer allocated by fallback.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_mmap_buffer_init),
(gst_file_src_map_region):
Set READONLY flag on mmap'ed buffers, otherwise
gst_buffer_make_writable() won't work properly (#314708).
Original commit message from CVS:
2005-08-28 Andy Wingo <wingo@pobox.com>
* gst/gstutils.h (GST_BOILERPLATE_FULL): Prototype instance_init
as having two arguments instead of just one. Allows superclasses
to access information on subclasses -- see the terrible for() loop
in gtype.c:g_type_create_instance for the reason why. All callers
changed.
Original commit message from CVS:
2005-08-26 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Check
element_set_state's return val.
(test_2_elements): Add test that's been disabled for months.
* gst/elements/gstfakesink.c: Cleanups. Add can-activate-push and
can-activate-pull properties.
* gst/elements/gstfakesrc.c: Cleanups. Add can-activate-push and
can-activate-pull properties. Implement is_seekable so fakesrc can
operate in pull mode.
* gst/base/gstbasesink.c (GstBaseSink): Remove has-loop, has-chain
properties.
(gst_base_sink_activate, gst_base_sink_activate_pull)
(gst_base_sink_activate_push): Make activation mode choosing work.
Cleanups.
(gst_base_sink_chain, gst_base_sink_loop): Assert activation mode
is right. Make pull mode work. Post an eos before pausing in pull
mode.
(gst_base_sink_change_state): Pay attention to the core's
change_state() return val.
* gst/base/gstbasesrc.c (GstBaseSrc): Remove has-loop,
has-getrange properties. Cleanups.
* gst/base/gstbasesrc.h (GstBaseSrc): Remove has_loop,
has_getrange and replace with can_activate_pull and
can_activate_push.
* gst/base/gstbasesink.h (GstBaseSink): Rearrange fields, add
locking comments. Remove has_loop, has_chain and replace with
can_activate_pull and can_activate_push.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Make sure all tasks are stopped.
* check/gst/gstbin.c: (GST_START_TEST):
Unref after usage for proper valgrinding.
* gst/gstpad.c: (gst_pad_finalize), (gst_pad_stop_task):
Really wait for the task to stop before destroying the
mutex.
* gst/gstqueue.c: (gst_queue_sink_activate_push),
(gst_queue_src_activate_push):
Small cleanups. Don't stop the task when we did not start
it.
* gst/gsttask.c: (gst_task_get_type), (gst_task_init),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause),
(gst_task_join):
* gst/gsttask.h:
Protect the stream lock with the object lock.
Disallow setting the stream lock when running.
Add cleanup_all to wait for the threadpool to finish.
Remove code to autoallocate a mutex if none was provided.
Add _join() to wait for a task to stop.
Protect the thread pool with a global lock.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_transform_size), (gst_base_transform_getcaps),
(gst_base_transform_setcaps), (gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
use gboolean return values and pointers to size so we can use the
full GST_BUFFER_SIZE range (guint) for buffer sizes
use GstPadDirection for transform_caps
* gst/base/gstbasetransform.h:
rename get_size to get_unit_size since that's what it is
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_caps):
use GstPadDirection for transform_caps
* gst/gstbuffer.c: (gst_buffer_new_and_alloc):
* gst/gstutils.h:
cleanup and debugging
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Remove extra parameter to debug output
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_activate_push):
Fix seek event handling.
* gst/gstpipeline.c: (gst_pipeline_change_state):
* gst/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_src_activate_push):
Don't start the src pad task on FLUSH_STOP if the pad
isn't linked.
Debug changes.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
2005-08-04 Andy Wingo <wingo@pobox.com>
* gst/elements/gstcapsfilter.c: Reimplement using basetransform,
fixes buffer_alloc proxying among other things.
* gst/base/gstbasetransform.c:
* gst/base/gstbasetransform.h:
Revert patch to gstbasetransform from 7-28 removing
delay_configure.
* gst/base/gstbasetransform.h (GstBaseTransformClass.get_size):
* gst/base/gstbasetransform.c (gst_base_transform_get_size):
Semantics changed, should return not the size of the output buffer
but the byte size of a buffer with a given caps.
* gst/base/gstbasetransform.c (gst_base_transform_getcaps): Better
debug object.
(gst_base_transform_configure_caps): Don't set out_size here: (in,
out) are not the pad caps until setcaps finishes.
(gst_base_transform_buffer_alloc): Proxy the buffer_alloc for the
not-in-place case as well. Deal with changing from in-place to
not-in-place within calling pad_alloc_buffer. Still a bit
concerned about the overhead here...
Original commit message from CVS:
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_have_type), (gst_type_find_element_init),
(stop_typefinding), (gst_type_find_element_handle_event),
(gst_type_find_element_chain), (gst_type_find_element_getrange):
* gst/elements/gsttypefindelement.h:
Set caps on all outgoing buffers, not just the first one.
Original commit message from CVS:
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_have_type),
(gst_type_find_element_check_set_buffer_caps),
(gst_type_find_element_init), (stop_typefinding),
(gst_type_find_element_handle_event),
(gst_type_find_element_chain), (gst_type_find_element_getrange):
* gst/elements/gsttypefindelement.h:
Set caps on first outgoing buffer when we've found the type.
Original commit message from CVS:
* configure.ac:
Use AC_SYS_LARGEFILE, which will set _FILE_OFFSET_BITS=64
and _LARGEFILE_SOURCE in config.h as required. Do not
export those flags in our .pc files any longer (#142209).
Remove unused GST_DISABLE_OMEGA_COTHREADS stuff.
* gst/elements/gstfilesink.c: (gst_file_sink_class_init),
(gst_file_sink_do_seek), (gst_file_sink_event),
(gst_file_sink_get_current_offset), (gst_file_sink_render):
Redo seek/tell calls with large file support in mind; add some
debugging messages; add log message that tells us when large
file support is unavailable or not enabled for some reason.
* gst/elements/gstfilesrc.c: (gst_file_src_class_init):
Add log message that tells us when large file support
is unavailable or not enabled for some reason.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small additions.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_get_times), (gst_base_sink_do_sync),
(gst_base_sink_activate_push), (gst_base_sink_activate_pull):
* gst/base/gstbasesink.h:
discont values are gint64, handle the math correctly.
* gst/base/gstbasesrc.c: (gst_base_src_loop):
Make the basesrc report error if the source pad is not linked.
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_src_activate_push):
Make queue collect data even if the srcpad is not linked.
Start pushing out data as soon as it is linked.
* gst/gstutils.c: (gst_element_unlink), (gst_flow_get_name):
* gst/gstutils.h:
Added gst_flow_get_name() to ease error reporting.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start):
* gst/base/gstbasesrc.h:
Add a gboolean to decide when to push out a discont.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_set_property), (gst_queue_get_property):
Some cleanups.
* tests/threadstate/threadstate1.c: (main):
Make a thread test compile and run... very silly..
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_get_property):
* gst/gstqueue.h:
Propagate GstFlowReturn more intelligently upstream and output
an ERROR/EOS when streaming stopped due to fatal error.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_get_times),
(gst_base_sink_do_sync), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Store and use discont values when syncing buffers as described
in design docs.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_push):
Push discont event when starting.
* gst/elements/gstidentity.c: (gst_identity_transform):
Small cleanups.
* gst/gstbin.c: (gst_bin_change_state):
Small cleanups in base_time distribution.
* gst/gstelement.c: (gst_element_set_base_time),
(gst_element_get_base_time), (gst_element_change_state):
* gst/gstelement.h:
Added methods for the base_time of the element.
Some MT fixes.
* gst/gstpipeline.c: (gst_pipeline_send_event),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time),
(gst_pipeline_get_last_stream_time):
* gst/gstpipeline.h:
MT fixes.
Handle seeking as described in design doc, remove stream_time
hack.
Cleanups clock and stream_time selection code. Added accessors
for the stream_time.
Original commit message from CVS:
2005-07-15 Andy Wingo <wingo@pobox.com>
* gst/elements/gstidentity.c (marshal_VOID__MINIOBJECT): Write our
own marshalling function for the handoff signal. Properly type the
buffer as a buffer. Fixes some warnings. Should do a more general
solution.
(gst_identity_class_init): Plug into the right marshaller.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
Original commit message from CVS:
* configure.ac:
make GST_ERROR_CFLAGS overridable and re-enable Werror
* docs/faq/cvs.xml:
add a note about error CFLAGS
* docs/gst/tmpl/gstfakesrc.sgml:
* gst/elements/gstfakesrc.c:
comment out some unused code
* gst/gst.c: (split_and_iterate):
* gst/registries/gstlibxmlregistry.c: (load_pad_template),
(load_feature):
plug some memleaks
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_filesink_render):
Simplify code so that we don't have to handle short
writes and return GST_FLOW_ERROR if an error occured.
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
* gst/elements/gsttee.c: (gst_tee_chain), (gst_tee_loop),
(gst_tee_sink_activate):
Core takes STREAM_LOCK for us now.
Original commit message from CVS:
2005-06-23 Jan Schmidt <thaytan@mad.scientist.com>
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
Don't restart typefinding on a discont.
* gst/gstelement.c: (gst_element_set_state):
Debug spelling fix.
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_send_event):
Allow changing mode of an active pad.
Debug output fixes.
* gst/registries/gstlibxmlregistry.c: (load_feature):
Don't cast a static pad template to a normal pad template.
Original commit message from CVS:
Added support for live sources and other elements that
cannot do preroll.
Updated design docs, added live-source design doc.
Implemented live source functionality in basesrc
Fix error condition in _bin_get_state()
Implement live source handling in -launch.
Added check for live sources.
Fixed case in GstBin where elements were changed state
multiple times.
Original commit message from CVS:
* gst/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_set_property): Allow NULL as possible value
for filter_caps property, indicating GST_CAPS_ANY.
Original commit message from CVS:
* gst/elements/gstfakesrc.c: (gst_fakesrc_create):
fix debug output
* gst/schedulers/Makefile.am:
use libgst prefix
* gstreamer.spec.in:
fix spec for it
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* gst/elements/gstcapsfilter.c: (gst_capsfilter_set_property):
Free existing caps if the capsfilter changes. Add a FIXME about
setting those caps on the pads.
* gst/gstutils.c: (gst_element_get_compatible_pad), (ghost_up):
Before adding a ghost pad to a parent bin, check that there isn't
already one for the element on the bin. Prevents infinite recursion
when using decodebin in parse pipelines. Andy says he'll rewrite the
way this works anyway, so ignore the hack.
Original commit message from CVS:
2005-06-02 Andy Wingo <wingo@pobox.com>
* gst/elements/gsttypefindelement.c (do_pull_typefind): Query the
file size, pass it on to the type find helper.
* gst/base/gstbasesrc.c (gst_basesrc_do_seek): Set the
segment_start and segment_end properly according to the seek
method. Segment_end is still a bit flaky because offset can be
negative for CUR and END cases, but it takes -1 as an "unset"
value.
Original commit message from CVS:
* gst/elements/gstidentity.c: (gst_identity_event),
(gst_identity_transform), (gst_identity_get_property):
Protect last_message property as it is accessed from
multiple threads.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_event):
Remove old pieces of code
Flushing the queue in an upstream event is a very bad idea.
Original commit message from CVS:
2005-05-26 Andy Wingo <wingo@pobox.com>
* gst/gstminiobject.c (gst_value_mini_object_collect): Use
gst_value_set_mini_object so as to add a ref on the object (which
will be removed when the value is unset).
* gst/elements/gstfakesink.c (gst_fakesink_class_init): Fix signal
arg type in ::handoff.
* gst/gstelement.c (gst_element_change_state): Also deactivate
pads in READY->NULL, just in case the element didn't make it to
PAUSED. Wingo tested, Wim approved.
Original commit message from CVS:
* gst/gstbin.c: (bin_element_is_sink), (has_ancestor),
(bin_element_is_semi_sink), (append_child), (gst_bin_change_state):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_send_event), (gst_pad_start_task):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop),
(gst_queue_sink_activate), (gst_queue_src_activate),
(gst_queue_change_state):
* gst/gstqueue.h:
Fix state changes for non sinks. We now change sinks, then elements
with unconnected srcpads, then the rest.
More efficient queue unlocking in flush and state changes.
Set the pad activate mode even if it does not have an activate
function.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_basesrc_activate):
Don't go in pull mode for non-seekable sources.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init),
(gst_type_find_element_dispose), (gst_type_find_handle_src_query),
(free_entry), (stop_typefinding),
(gst_type_find_element_handle_event), (find_peek),
(gst_type_find_element_chain), (do_pull_typefind),
(gst_type_find_element_change_state):
Allow typefinding (w/o seeking) in push-mode, simplified version
of what was in 0.8.
* gst/gstutils.c: (gst_buffer_join):
* gst/gstutils.h:
gst_buffer_join() from 0.8.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_finish_preroll),
(gst_basesink_chain_unlocked), (gst_basesink_activate):
* gst/gstminiobject.c: (gst_mini_object_get_type),
(gst_mini_object_free):
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_push), (gst_pad_push_event):
* gst/gstqueue.c: (gst_queue_change_state):
Don't queue buffers in basesink when we are flushing.
Unref buffer when flushing in basesink.
Flush queue when going to READY
Unref buffer when _push() returns an error.
Don't free MiniObject instance when refcount is incremented
in _finalize() so that we can recover objects.
Original commit message from CVS:
* gst/elements/Makefile.am: Remove some elements that don't
need to be in the core (or even exist at all).
* gst/elements/gstaggregator.c:
* gst/elements/gstaggregator.h:
* gst/elements/gstmd5sink.c:
* gst/elements/gstmd5sink.h:
* gst/elements/gstmultifilesrc.c:
* gst/elements/gstmultifilesrc.h:
* gst/elements/gstpipefilter.c:
* gst/elements/gstpipefilter.h:
* gst/elements/gstshaper.c:
* gst/elements/gstshaper.h:
* gst/elements/gststatistics.c:
* gst/elements/gststatistics.h:
* po/POTFILES.in: Remove above files.
Original commit message from CVS:
2005-05-10 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfakesink.c (gst_fakesink_render): Er, emit with
*all* the arguments.
* gst/base/gstbasetransform.c (gst_base_transform_event): Grab the
stream lock if it's a FLUSH_DONE; normal flushes don't get the
lock (according to the docs -- if this is wrong change the docs).
* gst/gstpipeline.c (gst_pipeline_change_state): Set the bus to
flush messages in the NULL state.
* gst/gstbus.c (gst_bus_post): If a bus is flushing, unref the
message immediately and return.
(gst_bus_set_flushing): New function. If a bus is flushing, it
flushes out any queued messages and immediately unrefs new
messages. This is so when an element goes to NULL, all of the
unhandled messages coming from it can be freed, and their
references to the element dropped. In other words: message source
ref considered harmful :P
* gst/gstbin.c (gst_bin_change_state): Unref peer element when
we're finished with it.
* gst/gstmessage.c (gst_message_new_state_changed):
Original commit message from CVS:
Remove old query functions. Ported old code.
Added position/convert helper functions to gstutils.
Reordered gstpad.c code, grouping relevant things.
Remove gst_message_new(), always need to speficy a specific
message.
Original commit message from CVS:
2005-05-06 Andy Wingo <wingo@pobox.com>
* gst/gstquery.h
* gst/gstquery.c (_gst_query_initialize): Extend GstQuery from
GstData, init a memchunk.
(standard_definitions): Add a few query types, deprecate a few.
(gst_query_get_type): New proc.
(_gst_query_copy, _gst_query_free, gst_query_new): GstData
implementation.
(gst_query_new_application, gst_query_get_structure): New public
procs.
* docs/design/draft-query.txt: Removed LINKS from the query types,
because all the rest can be dispatched to other pads -- seemed
ugly to have a query that couldn't be dispatched. internal_links
is fine as a pad method.
* gst/gstpad.h: Add query2 as a pad method, add the new functions
in gstpad.c, but maintain binary compatibility for the moment.
Will fix before 0.9 is out.
* gst/gstqueryutils.c:
* gst/gstqueryutils.h: New files, implement 3 methods for each
query type: parse_query, parse_response, and set. Probably need an
allocator as well.
* gst/gst.h: Add gstquery.h and gstqueryutils.h to the list.
* gst/elements/gstfilesink.c (gst_filesink_query2):
* gst/base/gstbasesrc.c (gst_basesrc_query2): Replace old query,
query_types, and formats methods.
* gst/gstpad.c (gst_pad_query2, gst_pad_query2_default)
(gst_pad_set_query2_function): New functions.
(gst_real_pad_init): Set query2_default as the default query2
function. Basically just dispatches to internally linked pads.
Needs review!
* gst/gstdata_private.h (_GST_DATA_INIT): Set data->refcount to 1
without using the atomic operations. Only one thread can possibly
be accessing the data at this point. Changed so as to avoid
gst_atomic operations.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_proxy_getcaps):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_getcaps):
* gst/gstpad.c: (gst_pad_peer_get_caps):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_bufferalloc), (gst_queue_handle_sink_event),
(gst_queue_src_activate), (gst_queue_change_state):
* gst/gstqueue.h:
* gst/gstutils.c: (gst_element_get_compatible_pad_template),
(intersect_caps_func):
Fix gst_pad_peer_get_caps(), make it return NULL if no peer.
Always take QUEUE_LOCK after STREAM_LOCK or we might deadlock.
Some fixes for the peer_get_caps() change.
Original commit message from CVS:
* gst/gstpad.c: Remove handling of filtered caps. Fix/merge
functions that handle filtered links.
* gst/gstpad.h: Remove 'appfilter' field and prototypes of
removed functions.
* gst/gstutils.c: Fix/remove utility functions that handle
filtered caps.
* gst/gstutils.h:
* gst/gstvalue.c: Add serialization/deserialization of caps
* gst/parse/grammar.y: Ignore filtered caps when linking. This
requires fixing so that the filter caps notation creates
a capsfilter element and sets the filter_caps property. I
think everyone probably wants to keep the shorthand notation.
* docs/gst/tmpl/gstelement.sgml: updates for API changes.
* docs/gst/tmpl/gstpad.sgml:
* gst/elements/gstelements.c: Register capsfilter element.
* gst/Makefile.am: fix spacing
* docs/random/ds/0.9-suggested-changes: random
Original commit message from CVS:
* gst/elements/Makefile.am:
* gst/elements/gstcapsfilter.c: New element that acts like an
identity, but filters caps. Will eventually replace filtered
caps in pad linking.
* gst/gstutils.c: (gst_element_create_all_pads): New function
to create all the ALWAYS pads that are registered with an
element class. This functionality should eventually be
merged in with GstElement initialization.
* gst/gstutils.h:
* testsuite/trigger/README: part of trigger test code that should
have been checked in a long time ago.
Original commit message from CVS:
* gst/Makefile.am: Remove as-libtool stuff. It's likely not
needed with new versions of libtool (nobody will confirm this),
and hard to carry around.
* gst/autoplug/Makefile.am:
* gst/base/Makefile.am:
* gst/elements/Makefile.am:
* gst/indexers/Makefile.am:
* gst/schedulers/Makefile.am:
* libs/gst/bytestream/Makefile.am:
* libs/gst/control/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/getbits/Makefile.am:
Original commit message from CVS:
Added typefind helper.
Small preroll fix in the base sink.
Disable typefind code in basesrc.
Crude port of typefindelement.
Fakesrc cleanups.
Original commit message from CVS:
* gst/gstplugin.c: (gst_plugin_check_file), (gst_plugin_load_file):
Switch to using G_MODULE_BIND_LOCAL, which means plugins are now
expected to link against libgstreamer.
* gst/base/Makefile.am: link against libgstreamer
* gst/elements/Makefile.am: same
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
Original commit message from CVS:
2005-03-29 Andy Wingo <wingo@pobox.com>
* docs/gst/Makefile.am:
* docs/libs/Makefile.am: Dist the overrides files.
* check/Makefile.am (clean-local): Remove .libs directories.
* gst/elements/Makefile.am (EXTRA_DIST): Add all the attic
elements to EXTRA_DIST, so po/ files are happy.
Original commit message from CVS:
2005-03-29 Andy Wingo <wingo@pobox.com>
* po/, docs/gst/: Commit automatic changes to docs and po files.
* gst/elements/Makefile.am (libgstelements_la_LDFLAGS): Link to
the versioned libgstbase.
* check/Makefile.am: Depend on an unversioned gst-register, seems
to make autoconf happier.
* gst/base/Makefile.am: Make libgstbase a versioned lib.
Original commit message from CVS:
Added state change code.
Added/updated docs.
Added sink base class, make fakesink extend the base class.
Small cleanups in GstPipeline.
Original commit message from CVS:
Next big merge.
Added GstBus for mainloop integration.
Added GstMessage for sending notifications on the bus.
Added GstTask as an abstraction for pipeline entry points.
Removed GstThread.
Removed Schedulers.
Simplified GstQueue for multithreaded core.
Made _link threadsafe, removed old capsnego.
Added STREAM_LOCK and PREROLL_LOCK in GstPad.
Added pad blocking functions.
Reworked scheduling functions in GstPad to prepare for
scheduling updates soon.
Moved events out of data stream.
Simplified GstEvent types.
Added return values to push/pull.
Removed clocking from GstElement.
Added prototypes for state change function for next merge.
Removed iterate from bins and state change management.
Fixed some elements, disabled others for now.
Fixed -inspect and -launch.
Added check for GstBus.
Original commit message from CVS:
Remove threadsafe properties. Fix elements because GObject
complains when installing a property before declaring a
set/get_property handler.
Rearrange gstelement.h file, use STATE macros for state locks.
Free mutexes in the finalize method instead of dispose.
Original commit message from CVS:
First THREADED backport attempt, focusing on adding locks and
making sure the API is threadsafe. Needs more work. More docs
follow this week.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func):
Explicitely make an element release locks in a group when being
remove from a bin.
* gst/gstqueue.c: (gst_queue_chain), (gst_queue_get):
If there's no scheduler, always return immediately (similar to
gst_element_interrupt).
Original commit message from CVS:
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
Fix buffer pushing if stream EOSes during typefinding.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/gstevent.sgml:
* gst/gstevent.c: (gst_event_new_filler_stamped),
(gst_event_filler_get_duration):
* gst/gstevent.h:
Add two new functions for filler events (which are used to
synchronize streams if one of them is not having any data
for a while) without interrupting the actual data-stream.
Basically a no-op.
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_link_sink), (gst_queue_link_src),
(gst_queue_change_state):
Allow for renegotiation while filled. Required for stream
switching while playing.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_link), (gst_queue_handle_src_query):
Reverted to 1.110 until this makes the testsuite and various
apps work.
Original commit message from CVS:
* gst/elements/gstbufferstore.c:
(gst_buffer_store_add_buffer_func):
don't try to make subbuffers bigger than they can be. (fixes
#159970)
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_is_fixed_foreach):
* gst/gstpad.c: (_gst_pad_default_fixate_value),
(_gst_pad_default_fixate_foreach):
* gst/gstvalue.c: (gst_type_is_fixed), (gst_value_is_fixed):
* gst/gstvalue.h:
Deprecate _type_is_fixed, use _value_is_fixed instead, since
in some cases (arrays), the fixedness depends on the content.
* gst/gstqueue.c: (gst_queue_handle_src_query):
Check for availability before doing something.
Original commit message from CVS:
2004-11-24 Martin Soto <martinsoto@users.sourceforge.net>
* gst/gstqueue.c (gst_queue_link_sink): Grab the lock only when
it is necessary to wait.
Original commit message from CVS:
2004-11-23 Martin Soto <martinsoto@users.sourceforge.net>
* gst/gstqueue.c (gst_queue_init, gst_queue_link_sink)
(gst_queue_link_src): Allow for renegotiating the caps of the sink
pad. The queue will now wait until it is empty and forward the new
caps to the source.
* gst/gstbin.c (gst_bin_set_element_sched)
(gst_bin_unset_element_sched): Make sure that all elements and
links are registered and unregistered with the scheduler exactly
once. This elaborates on a fix by Benjamin Otte, but
guarantees that decoupled elements are also registered.
Original commit message from CVS:
* gst/elements/gstfakesink.c: (gst_fakesink_class_init):
* gst/elements/gstidentity.c: (gst_identity_class_init):
Use G_SIGNAL_TYPE_STATIC_SCOPE, patch by Christophe Fergeau
<teuf@gnome.org> (#157263).
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init),
(gst_type_find_handle_src_query):
Subtract size of internally stored data from position queries.
Original commit message from CVS:
2004-11-03 Christophe Fergeau <teuf@gnome.org>
* gst/elements/gstidentity.c: (gst_identity_class_init): GstBuffer is
a boxed type, marshal the signal with VOID__BOXED, not VOID__POINTER
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_handle_src_query):
Subtract current queue contents from position queries.
Original commit message from CVS:
2004-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst/elements/gstfakesrc.c: (gst_fakesrc_get):
Set element to EOS before sending EOS event
Original commit message from CVS:
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
Handle EOS events when doing the transition from
typefind to data passing. This should fix the
infinite loops in short files.
Original commit message from CVS:
* gst/elements/gsttypefindelement.c: (stop_typefinding):
Push the buffer store instead of clearing it in case that
the stream is not seekable.
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_filesrc_get_mmap):
work with non-regular files that can be mmapped (like /dev/zero)
* gst/elements/gsttypefindelement.c: (gst_type_find_element_chain):
get rid of typefinds that require a seek when we can't seek instead
of trying them over and over again
* tools/gst-launch.c: (idle_func), (error_cb), (main):
return non-zero failure value when the pipeline was interrupted or
an error occurred
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_filesrc_open_file),
(gst_filesrc_srcpad_event):
make seek events to before start/after end of file not fail, but
seek to start/end instead
* testsuite/caps/fraction-convert.c: (check_from_double_convert):
add more output
Original commit message from CVS:
* gst/autoplug/gstspideridentity.c: (gst_spider_identity_link):
don't delay links on the sink elements, it causes unnegotiated
links.
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_base_init):
add our padtemplates, we indeed do have some.
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event),
(gst_type_find_element_chain):
don't push data when typefinding failed.
* gst/gstpad.c: (gst_pad_link_fixate):
check that no fixate function returns empty caps.
* gst/gstpad.c: (gst_pad_push):
check that the link is negotiated before data gets pushed.
* tools/gst-register.c: (main):
don't assert (fixes#148283)
Original commit message from CVS:
2004-07-23 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst/elements/gstmultifilesrc.c: (gst_multifilesrc_class_init),
(gst_multifilesrc_init), (gst_multifilesrc_set_property),
(gst_multifilesrc_get_property), (gst_multifilesrc_get):
* gst/elements/gstmultifilesrc.h:
Added newmedia property so it generates newmedia events between each
file when property is set, as well as fixed eos handling
