Commit graph

7101 commits

Author SHA1 Message Date
Sebastian Dröge
1159d7144a ges-uri-asset: Annotate async/sync/finish functions correctly
Due to bad naming, gobject-introspection can't figure these out itself and
prints a warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7118>
2024-07-01 13:10:27 +00:00
Edward Hervey
43bf898f2d nlecomposition: Don't leak atomic rc box
* gst_structure_get => increases ref
* query_ancestors_position: There are two refs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7116>
2024-07-01 12:25:41 +00:00
Edward Hervey
8addeae87b nlecomposition: Don't leak message
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7116>
2024-07-01 12:25:41 +00:00
Edward Hervey
734ca44805 ges-layer: Don't use invalid layers
There's a possibility that there are no layers at that priority

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7116>
2024-07-01 12:25:41 +00:00
Edward Hervey
5d7a35ca59 ges-discoverer-manager: Properly initialize/free GRecMutex
Fixes small leak of mutex internals

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7116>
2024-07-01 12:25:41 +00:00
Sebastian Dröge
f8fb72b0d7 ajasrc: Drop some frames after signal recovery
After signal recovery the capture times for the next frames are simply
wrong. Experimentally this affected 2-3 frames and seemed to be related
to the buffer fill level after signal recovery, so drop at least 5
frames and up to fill level + 1 frames in this situation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7106>
2024-07-01 11:37:08 +00:00
Sebastian Dröge
63dec7c704 ajasrc: Reset clock after signal loss or signal change
Otherwise timestamps would continue as if there was no gap, and the next
frames until the clock has compensated would be all too late.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7106>
2024-07-01 11:37:08 +00:00
Thibault Saunier
5f50b93f0a meson: Remove duplicated library definitions for gstmse and gstanalytics
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7109>
2024-06-30 15:43:27 +00:00
Seungha Yang
c2531853fc d3d12commandallocatorpool: Remove unused methods
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7108>
2024-06-29 20:47:39 +09:00
Seungha Yang
c013e88295 d3d12decoder: Use sub-allocated bitstream buffer
Since a buffer resource will occupy at least 64KB,
allocating upload resource per decoding command might not be
an optimal approach. Instead, use sub-region of a upload resource
for multiple decoding command if sub-regions are not overlapped
each other.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7108>
2024-06-29 20:47:39 +09:00
Jordan Petridis
60454336c8 validate: Remove G_REGEX_OPTIMIZE usage
It's not needed and causes issues with valgrind (which doesn't support jit)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7112>
2024-06-28 14:13:31 +00:00
Tim-Philipp Müller
b4ebf52f06 subprojects: update liblc3 wrap to 1.1.1
See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6407#note_2472538

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7111>
2024-06-28 13:38:36 +01:00
Guillaume Desmottes
037d36f28d rtmp2: guard against calling gst_amf_node_get_type() with NULL
gst_amf_node_get_type() raises a CRITICAL if called with a NULL node.
All callers were checking for this except those.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7103>
2024-06-28 07:18:29 +00:00
Xavier Claessens
84b3a0950d build: Add missing common options that are yielding in subprojects
- Align `glib_debug`, `glib_assert` and `glib_checks` options with GLib,
  otherwise glib subproject won't inherit their value. Previous names
  and values are preserved using Meson's deprecation mechanism.
- Add `extra-checks` and `benchmarks` options in the main project so it
  can be inherited in GStreamer subprojects.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1165>
2024-06-27 15:53:46 +00:00
He Junyan
77f779e86a vaav1enc: Move repeat header data to a dedicated buffer
When enable parallel encoding, it is possible that the unshown frame
is not output but it is already be marked as a repeated frame header.
So we need to use a dedicated buffer to hold the repeat frame header,
don't mix it with the orignal frame data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6867>
2024-06-27 12:48:37 +00:00
Seungha Yang
fca7e5aa23 video: convertframe: Add support for d3d12 conversion
Use d3d12convert in case of d3d12 memory

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7095>
2024-06-26 17:56:41 +00:00
Seungha Yang
76fd732d42 qsv: Check d3d shared resource tier using D3D11 API
We can check the tier using d3d11 API. Thus, don't need to
create d3d12 device

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7099>
2024-06-26 16:25:06 +00:00
Jan Schmidt
73480e60d0 adaptivedemux: Fix handling closed caption streams
Fix a typo "CLOSED_CAPTION" -> "CLOSED-CAPTION" and
a broken if statement that always bailed out for
closed captions

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6985>
2024-06-26 13:44:27 +00:00
Jan Schmidt
2bd682d326 webrtcdsp: Enable multi_channel processing
Enable multi_channel processing in webrtc-audio-processing when the
input or output has multiple channels.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3220
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7100>
2024-06-25 22:29:21 +10:00
Piotr Brzeziński
32d4e5f73c vtenc: Fix redistribute latency spam
Just a quick fix to only report the maximum noticed delay (measured by frames inside the encoder) instead of changing
the reported latency every time the number there changes, which is way too often.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7094>
2024-06-24 16:08:37 +02:00
Seungha Yang
e71ffe978a d3d12converter: Make sure data upload before executing compute shader
Use read d3d12 map, so that upload can happen if needed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7093>
2024-06-24 20:49:19 +09:00
Seungha Yang
245e15eab0 d3d12: Add ARGB64_LE format support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7093>
2024-06-24 20:11:21 +09:00
Seungha Yang
8c538c8122 d3d12: Add AV12 format support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7093>
2024-06-24 20:11:13 +09:00
Seungha Yang
2703f41da6 d3d12: Add NV16, NV61, and NV24 format support
Can reuse NV12 shader for the formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7093>
2024-06-24 20:10:50 +09:00
Seungha Yang
bb0f95a67f d3d12: Add A420, A422 and A444 format support
Adding A420/A422/A444 and its 10/12/16 bits format support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7093>
2024-06-24 20:10:50 +09:00
Seungha Yang
52bc28c93d d3d12: Add YUV 4:1:0 and 4:1:1 format support
Adding Y41B, YUV9, and YVU9 format support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7093>
2024-06-24 20:10:50 +09:00
Seungha Yang
69ea20b739 d3d12videosink: Present on GstVideoOverlay::expose()
... so that updated backbuffer can be swapped and presented

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7079>
2024-06-24 08:46:24 +00:00
Seungha Yang
25514c8fc1 d3d12: Add v216, v210, r210, v308, IYU2, RGB, BGR format support
Reuse the compute shader implemented for d3d11

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7092>
2024-06-23 22:30:40 +09:00
Seungha Yang
c1498851b3 d3d12: Add support for UYVY, VYUY, and YVYU
Use already implemented compute shaders

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7092>
2024-06-23 22:30:40 +09:00
Seungha Yang
6fcb5f6ae7 d3d12: Add RGB{16,15} and BGR{16,15} format support
d3d12 device can support B5G6R5_UNORM and B5G5R5A1_UNORM formats
in pixel shader. If the format is not supported by device,
U16_UINT format with compute shader will be used, like d3d11converter

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7092>
2024-06-23 22:30:40 +09:00
Seungha Yang
94bb9fec58 d3d12: Add BGRA64 and BGR10A2 format support
Map BGRA64 and BGR10A2 to Y416 and Y410, respectively,
since it's possible RGB space decoder output

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7092>
2024-06-23 22:30:30 +09:00
Seungha Yang
66cc3ff84e d3d12: Add support for DXGI native packed YUV formats
Adding YUY2, Y210, Y216, and Y416 format support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7092>
2024-06-23 22:11:32 +09:00
Seungha Yang
dd4d85272e d3d12converter: Fix Y410 conversion
Adding format conversion helper and use compute shader in case that
output format does not support RTV.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7088>
2024-06-23 10:53:18 +00:00
Seungha Yang
f432e61bdc d3d12memory: Add support for UAV descriptor cache
Cache shader invisible UAV descriptor in memory

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7088>
2024-06-23 10:53:18 +00:00
Seungha Yang
ec06b0445e d3d12: Format table refactoring
Hide format table from header. This is a preparation for compute
shader based format support

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7088>
2024-06-23 10:53:18 +00:00
George Hazan
9e1abc0797 parsebin: fix compilation problem with Visual C++ 2017
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7089>
2024-06-22 20:56:03 +03:00
Tim-Philipp Müller
03a60c9950 subprojects: bump opus wrap to 1.5.2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7085>
2024-06-22 12:26:22 +01:00
Seungha Yang
5d18d8a109 d3d12converter: Upload shader buffer resources earlier
Schedule (semi-)static resource upload at converter creation time.
And use single resource for all vertex, index, and constant
buffers, since separate resources will waste GPU memory.
Note that size and address of a committed resource are 64K aligned
even if requested buffer size is small.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7081>
2024-06-21 20:16:19 +09:00
Edward Hervey
a20569b1ba basesink: Remove field not used
It was never actually used since it was introduced as part of the commit
introducing support for instant rate

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7077>
2024-06-21 09:29:48 +02:00
Seungha Yang
c5785fbeec d3d12converter: Make gamma remap work as intended
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7073>
2024-06-20 17:54:12 +00:00
Sebastian Dröge
8117ee4fa3 queue, queue2, multiqueue: Timestamps of gap events must be valid
This is checked in gst_event_new_gap() so doesn't have to be checked again here,
but simply can be asserted with a g_return_if_fail().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7071>
2024-06-20 20:02:43 +03:00
Sebastian Dröge
909cd6d865 queue: queue2: multiqueue: Don't work with segment.position if buffers have no timestamps
If the first buffers have no timestamp then the sink position would be
initialized to 0. The source pad might output this buffer, which would then
initialize the source position to 0 too.

Afterwards two buffers with a valid but huge timestamp might arrive before any
of them are output on the source pad. The first one would set the sink position
to a huge value, the second one would notice that the difference between the
huge value and 0 is certainly larger than max-size-time and consider the queue
as full.

Instead, simply don't update the times from buffers without timestamps and
assume whatever was set before is still valid, i.e. the buffer has the same
timestamp as the previous one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7071>
2024-06-20 20:02:43 +03:00
Seungha Yang
e90880e988 d3d12device: Don't warn for out of range device index
It can happen during enumeration as well, and it's expected error

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7070>
2024-06-20 14:23:13 +00:00
Seungha Yang
2983c50a9f d3d12device: Dump device feature support
... and use CD3DX12FeatureSupport helper class in d3dx12.h

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7070>
2024-06-20 14:23:13 +00:00
Edward Hervey
11ff2b2835 decodebin3: Fix keyframe drop probe handling
We were storing the probe id in a different structure (DecodebinOutputStream)
than the pad it is targetting (which is in MultiQueueSlot).

The problem is that when re-targetting outputs (to a different slot)... we would
end up having an invalid probe id, or not have a reference to an existing one.

Instead, store the probe id in the same structure as the pad it's targetting

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7069>
2024-06-20 12:56:46 +00:00
Edward Hervey
6aa0c8442d decodebin3: Fix detection of selection done
We should not assert if there are still some old streams that are waiting to be
deactivated.

Instead wait for them to be gone before posting the selection done message

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7069>
2024-06-20 12:56:46 +00:00
Seungha Yang
bdb12db5c6 d3d12device: Prevent too many in-flight GPU commands
Even if each element is checking its own in-flight commands,
total number of commands can get larger in case of complex pipeline.
Limits total number of in-flight commands at command queue level

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7066>
2024-06-20 00:58:45 +09:00
Seungha Yang
143efa2f86 d3d12commandqueue: Detect device removed event
Early return if device removed event is detected

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7066>
2024-06-20 00:07:41 +09:00
Seungha Yang
327fb9924c d3d12basefilter: Add adapter property
Allows initial GPU adapter selection

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7066>
2024-06-20 00:03:28 +09:00
Seungha Yang
2ec7d82bd7 d3d12: Move fence setter helper method to gst-libs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7057>
2024-06-19 13:19:48 +00:00