Currently in rtp_session_send_rtp(), the existing ntp-64 RTP header
extension timestamp is updated with the actual NTP time before sending
the packet. However, there are some circumstances where we would like
to preserve the original timestamp obtained from reference timestamp
buffer metadata.
This commit provides the ability to configure whether or not to update
the ntp-64 header extension timestamp with the actual NTP time via the
update-ntp64-header-ext boolean property. The property is also exposed
via rtpbin. Default property value of TRUE will preserve existing
behavior (update ntp-64 header ext with actual NTP time).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1580
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3451>
- Based heavily on the existing Qt5 integration however:
- The sharing of OpenGL resources is slightly different
- The integration with the scengraph is a bit different
- Wayland, XCB and KMS have been smoke tested. Android, MacOS/iOS,
Windows may or may not work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3281>
Previously we tried to route an incoming RTCP FB FIR to the correct ssrc
using the "media source" component of the RTCP FB message. However,
according to RFC5104 (section 4.3.1.2) the "media source" SHALL be set
to 0. Instead the ssrc(s) in use are propagated via the FCI data. Now
a specific GstForceKeyUnit event is sent for every ssrc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3292>
RTP source statistics are tracked for local senders by
treating them as a receiver of their own outbound packets.
Accordingly, track the highest packet seqnum so that the
packets-lost calculation generates a sensible number instead
of always reporting -$number_of_packets_sent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3454>
When getting a "404 Not Found" response from the DESCRIBE request, the
source produced a "No supported authentication protocol was found" error
instead of passing on the 404, which was confusing.
Only produce this error message when we're handling a response of "401
Unauthorized" without a compatible WWW-Authenticate header.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3414>
In current tile representation, only tiles with power of two
width and height in bytes are supported. This limitation
prevents adding more complex tiles formats.
In this patch, we deprecate tile_ws and tile_hs from GstVideoFormatInfo and
replace if with an array of GstVideoTileInfo. Each plane tiles are then
described with their pixels width/height, line stride and total size.
The helper gst_video_format_info_get_tile_sizes() that depends on the
deprecated API is also being removed. This can simply be removed as it wasn't
in any stable release yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
The only case where we definitely need to write a new trun is when the
data_offset value does not match the end of the list of entries.
Needing multiple trun atoms is required when interleaving multiple
streams together.
All other cases can be covered by adding more entries to the existing
trun atom.
Fixes playback of fragemented mp4 in ffplay and chrome.
Using e.g. mp4mux fragment-duration=1000 fragment-mode=dash-or-mss
and
mp4mux fragment-duration=1000 fragment-mode=first-moov-then-finalise
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3426>
Postpone the cleanup of any consecutive sequence of lost frames
which starts at frame 0, until frame 100 is dequeued from driver.
This allows fluster tests JVT/CVWP2_TOSHIBA_E, JVC/CVWP3_TOSHIBA_E
and HEVC/POC_A_Bossen_3 that sends out-of-order frames to successfully
complete (e.g., test of Amphion vpu driver).
Fixes#1569
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3398>
In order to figure out if the "raw" audio contained within the wav
container is actually DTS, wavparse calls the typefinder helper
except that means it runs all typefinders.
Since it only cares about checking for DTS, we should only run the
audio/x-dts typefinder (if present). Commit 858e516 did not really
fix things.
Use the new type helper with the caps to fix this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3417>
Set udpsrc seqnums on all events sent to the udpsrc's, and before
forwarding events out of rtspsrc set the latest seek seqnum on them if
any.
Also produce a consistent seqnum in rtspsrc from the very beginning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>
Instead of returning a "const gchar" or a "gchar" that should not be freed, always
return a duplicated string as those functions were used together with g_strdup anyway.
This is needed to prepare support for returning modified strings in next commit.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1147>
This is small regression from commit f7abd81a.
When calling `gst_element_query()` no pad is associated with that query, but the
current code always forwards the query to the associated pad, which is NULL in
previous case. This patch checks for the pad before forwarding the query.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3404>
In a few cases throughout qtdemux, the results of QT_UINT32 were being
stored in a signed integer, which could cause subtle bugs in the case of
an integer overflow, even allowing the the result to equal a negative
number!
This patch prevents this by simply storing the results of this function
call properly in an unsigned integer type. Additionally, we fix up the
length checking with stsd parsing to prevent cases of child atoms
exceeding their parent atom sizes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3344>
Unlike the legacy elements, GstAdaptiveDemuxStream is a GObject now,
so a bunch of things that were actually stream methods on the
parent demux object can directly become stream methods now.
Move the stream class out to a header of its own.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>
Sometimes g_input_stream_read_all_finish() can return
0 bytes, but still succeed (return TRUE) and have more
data available later. Only finish the transfer
if it returns 0 bytes *and* FALSE with no error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>
The cancelled flag was only set in the stream finalize()
method, after all activity on the stream has stopped anyway.
Replace uses of cancelled with checks on the stream state.
Remove the replaced flag, which was checked but never set
to TRUE anywhere any more.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3314>
When matching segments across playlists with Program-Date-Times,
use the difference in segment PDTs to adjust the stream time
that's being transferred. This can fix cases where the
segment boundaries don't align across different streams
and the first download gets thrown away once the PTS
is seen and found not to match.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3309>
Check whether the init file / MAP data for a segment
is different to the current data and trigger an
update if so. Previously, the header would only
be checked in HLS after switching bitrate or
after a seek / first download.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3307>
Previously the minimum buffering threshold was hardcoded to a specific
value (10s). This is suboptimal this an actual value will depend on the actual
stream being played.
This commit sets the low watermark threshold in time to 0, which is an automatic
mode. Subclasses can provide a stream `recommended_buffering_threshold` when
update_stream_info() is called.
Currently implemented for HLS, where we recommended 1.5 average segment
duration. This will result in buffering being at 100% when the 2nd segment has
been downloaded (minus a bit already being consumed downstream)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3240>
In order to figure out if the "raw" audio contained within the wav
container is actually DTS, right now we call the typefinder helper
which runs all typefinders.
Speed up this type finding process by specifying the extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3294>
We've seen occasional crashes in the `wavparse` module associated with
referencing a buffer in `gst_wavparse_chain` that's already been freed. The
reference is stolen when the buffer is transferred to the adapter with
`gst_adapter_push` and, IIUC, assuming the source doesn't hold a reference to
the buffer, the buffer could be freed during interaction with the adapter in
`gst_wavparse_stream_headers`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3179>
in certain ways.
In the case that a test is provided for, the size of the `fmt ` chunk is
changed from 16 bytes to 18 bytes (bytes 17 - 20 below):
```
$ hexdump -C corruptheadertestsrc.wav
00000000 52 49 46 46 e4 fd 00 00 57 41 56 45 66 6d 74 20 |RIFF....WAVEfmt |
00000010 12 00 00 00 01 00 01 00 80 3e 00 00 00 7d 00 00 |.........>...}..|
00000020 02 00 10 00 64 61 74 61 |....data|
00000028
```
(Note that the original file is much larger. This was the smallest sub-file
I could find that would generate the crash.)
Note that, while the same issue doesn't cause a crash in pull mode, there's a
different issue in that the file is processed successfully as if it was a .wav
file with zero samples.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3173>
This is a regression that was introduced in
cca2f555d1 (yes, 9 years ago).
The only place where a demuxer streaming thread should be stopped is when the
sinkpad is deactivated from pull mode (i.e. PAUSED->READY).
Attempting to stop the task in this function would cause this to happen when a
FLUSH_STOP or STREAM_START event is received... which can cause deadlocks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3109>
If the SETUP request returns an IPv6 server address in the Transport
field, we would generate an incorrect URI, and multiudpsink would fail
to initialize:
```
rtspsrc gstrtspsrc.c:9780:dump_key_value:<source> key: 'Transport', value: 'RTP/AVP;unicast;source=fe80::dc27:25ff:fe5e:bd13:8080;client_port=62696-62697;server_port=4000-4001'
...
rtspsrc gstrtspsrc.c:4595:gst_rtspsrc_stream_configure_udp_sinks:<source> configure RTP UDP sink for fe80::dc27:25ff:fe5e:bd13:8080:4000
...
multiudpsink gstmultiudpsink.c:1229:gst_multiudpsink_configure_client:<udpsink0> error: Invalid address family (got 23)
```
We can't look at stream->is_ipv6 because we can't rely on the server
returning the right value there. In the issue reported about this,
server reported itself as `KuP RTSP Server/0.1`, and the SDP was:
```
c=IN IP4
m=video 54608 RTP/AVP 96
a=rtpmap:96 H264/90000
```
So we need to parse the string value and figure out the family
ourselves.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1058
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1819>
Update unit test for some mpd cases that were reporting
timestamps including the period start time, while
dashdemux2 expects that it needs to add the period
start time itself.
Fix the tests to not expect the period start time
to be included.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3025>
These values will be referred to as timestamp relative to period start
so need to subtract period start time from the values.
Fixes a problem with determining the start position when playing Live content
with SegmentTimeline, presentationTimeOffset and a non-0 period start time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3025>
Starting with Meson 0.62, meson automatically populates the variables
list in the pkgconfig file if you reference builtin directories in the
pkgconfig file (whether via a custom pkgconfig variable or elsewhere).
We need this, because ${prefix}/libexec is a hard-coded value which is
incorrect on, for example, Debian.
Bump requirement to 0.62, and remove version compares that retained
support for older Meson versions.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1245
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3061>
Change the way streams are woken up to download more data.
Instead of checking the level on tracks that are being
output as data is dequeued, calculate a 'wakeup time'
at which it should download more data, and wake up
the stream when the global output position crosses
that threshold.
For efficiency, compute the earliest wakeup time
for all streams and store it on the period, so the
output loop can quickly check only a single value
to decide if something needs waking up.
Does the same buffering as the previous method,
but ensures that as we approach the end of
one period, the next period continues incrementally
downloading data so that it is fully buffered when
the period starts.
Fixes issues with multi-period VOD content where
download of the second period resumes only after
the first period is completely drained.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3055>
Some servers can return playlists with "old" media playlists and different
Discont Sequence.
In those cases, the segment stream times would be negative when creating a new
time mapping. In order to properly handle such scenarios, shift the values to
stored accordingly to end up with non-negative reference stream time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3054>
GLib made the unfortunate decision to prevent libgobject from ever being
unloaded, which means that now any library which registers a static type
can't ever be unloaded either (and any library that depends on those,
ad nauseam).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/778>
When advancing fragment in live, it's normal to return
GST_FLOW_EOS when playing at the live edge of the available
fragments. In that case, we still want to adjust bitrate
dynamically.
Fixes issue with dashdemux2 where the current bitrate of
each adaptation set is changed to the lowest one when
updating the mpd for a live stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3020>
Just like for the seconds field, there are no limitations on the hours and
minutes fields. The specification for xml schema duration fields doesn't forbid
specifying durations with only (huge) minutes or hours values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2951>
When updating a manifest during live playback, preserve the current
representation for each stream.
During update_fragment_info, if the current representation changed
because it couldn't be matched, trigger a caps change and new
header download.
This reverts commit e0e1db212f
and reapplies "dashdemux: Fix issue when manifest update sets slow start
without passing necessary header & caps changes downstream" with
changes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2920>
Timers for RTX packets are dealt with later in update_rtx_timers(), and
timers for non-RTX packets would potentially also be unscheduled a
second time from there so avoid that.
Also don't shadow the timer variable from the outer scope but instead
make use of it directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
libsoup 3.0.x dispatches using a single source attached when the session
is created, so we need to create the session with the same context that
our download thread is later using.
2.74 or 3.1 will dispatch a response using the context which sent the
request. However, for any context other than the one that created the
session, this will also create and destroy sources, so there's still
some slight performance benefit.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2913>
Handle select-streams and seek events in an element
level send_event() vfunc, so they can be received
before any source pads are created.
This allows preferred streams to be selected before
segment downloading starts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2912>
When stopping the element, make sure the pad task
is stopped before destroying the part readers.
Closes a race where the pad task might access
a freed pointer.
Also add a guard against this sort of thing
by holding a ref to the reader in the pad loop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2901>
When playing live, it's possible that one stream reaches
the end of the available playback window and goes to sleep
waiting for a manifest update, and the manifest update
introduces a new period. In that case, the sleeping
stream needs to wake up and go 'properly' EOS before we
can advance the input to the new period.
Accordingly, make sure that a stream's last_ret value
is not marked as EOS if it's just sleeping waiting for a live
manifest update.
Also fix the output loop to go back and re-check if it's
time to switch to the next period after dequeuing and
discarding an EOS event.
https://livesim.dashif.org/livesim/periods_20/testpic_2s/Manifest.mpd
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2895>
That is, get rid of unnecessary and wrong special-casing.
This could always use gst_rtsp_url_get_request_uri_with_control() but as
we only have the control base URI as string it is easier to just call
gst_uri_join_strings().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2868>
Otherwise we won't send the protection packets for the last few
packets when a stream ends.
Also send EOS on the FEC src row pad immediately, and on the FEC src
column pad after draining is complete. This makes it so that the FEC
src pads on rtpbin behave the same way as the RTCP src pads on rtpbin
when EOS is received on the send_rtp_sink pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2863>
When returning GST_ADAPTIVE_DEMUX_FLOW_RESTART_FRAGMENT
for the first segment data, we might need to requeue the
header.
This was leading to occasional prerolling stalls on
HLS live streams with renditions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2849>
Make sure gst_adaptive_demux_loop_cancel_call()
never tries to operate on an invalidated main context. Make
sure to clear the main context pointer while holding the lock,
and to check it in gst_adaptive_demux_loop_cancel_call()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2847>
Media playlist updates and fragment downloads happen in an interleaved
fashion. When a media playlist update fails *while* a segment is being
downloaded, this means we lost synchronization.
Properly propagate and handle this
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
There is now only a single case where we setup the initial playlist to 0, which
is for the very first variant stream.
Rendition streams will have the initial playlist "synchronized" against the
variant stream media playlist.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
Loss of synchronization happens when the updated media playlist has no
relationship to the previous ones. This could happen because of network issues,
server issues, etc...
When this happens, we take no chance and "reset" ourselves so that we can "seek
back to live" against the new updated playlists.
Since this happens at the "media playlist update" level, make sure the custom
flow return is propagated up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
We are already in the main scheduler thread, therefore we can do the "seek back
to live" directly. This also avoids other pending actions to take place.
Also handle the loss of sync when doing manifest updates.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
Close some race conditions in switching to the next period,
by ensuring the tracks are completely drained first and by
not outputting EOS events to the output source pad
if there is another period pending.
Fixes Manifest_MultiPeriod_1080p.mpd some more.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
Before sending EOS, update the period's has_next_period
flag and/or create the next period. This closes a race
where the output loop might receive the EOS event
and either push it downstream (causing premature EOS),
or receive it and try and switch to the next period
before that period is completely set up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
When combining stream flows, ignore streams that
are not selected, instead of checking whether
the stream state has changed yet.
Fixes another issue with dashdemux2 where it fails to
change to the next period when playing content with
several video, audio and text streams, as with
Manifest_MultiPeriod_1080p.mpd when seeking to 730
just before the end of the first period.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.
In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.
Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.
We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.
Relevant upstream merge requests / issues:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
The caps negotiation should respect the selected method to the test pipeline below works properly.
gst-launch-1.0 videotestsrc ! video/x-raw,width=320,height=600 ! videoflip method=clockwise ! video/x-raw,width=600,height=320 ! fakesink
Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2803>
In the trick mode, driver may queue a valid buffer follow by an
empty buffer which has no valid data to indicate EOS.For the empty
buffer whose memory is multi-plane, need to resize it before
unreference it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2731>
In file included from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/gstreamer-1.0/gst/gl/gstglfuncs.h:87,
from ../gst-plugins-good-1.20.3/ext/qt/qtglrenderer.cc:14:
../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/gstreamer-1.0/gst/gl/glprototypes/gstgl_compat.h:40:18: error: conflicting declaration 'typedef void* GLsync'
40 | typedef gpointer GLsync;
| ^~~~~~
In file included from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtGui/qopengl.h:127,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsggeometry.h:44,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsgnode.h:43,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsgrendererinterface.h:43,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qquickwindow.h:44,
from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/QQuickWindow:1,
from ../gst-plugins-good-1.20.3/ext/qt/qtglrenderer.cc:6:
../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtGui/qopengles2ext.h:24:26: note: previous declaration as 'typedef struct __GLsync* GLsync'
24 | typedef struct __GLsync *GLsync;
| ^~~~~~
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2763>
* When dealing with rendition streams, we attempt to synchronize the media
playlist against the variant stream. This helps with speeding up the correct
initial fragment search and avoids issues when streams at activated at a much
later time.
* Also add checks for variant stream existence before attempting to use them
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
When updating playlists, there is a possibility that the playlists don't
perfectly align, but the last entry of the previous playlist is *just* before
the first entry of the new playlist.
In those cases, we still can transfer the timing information from one playlist
to another, but we do not want to return that segment as being the matching one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
When matching playlists, there is a possibility that rendition streams will not
have been updated in time (for example because that stream started later, or
playback was paused). This would cause several playback failures and seeking
failures.
In order to still fall back on our feet, attempt to synchronize that rendition
playlist against the current variant playlist. This will attempt to match the
stream time using SN/DNS/PDT/...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
If we have been updating too slowly and have gone out of the current live
window, inform the baseclass accordingly.
This is different from the case where we have been updating quicker than what
the server provides.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
* Since only flushing seeks are allowed, the "current" position is always the
global output position (and not "some" stream current position).
* In terms of figuring out to which stream to "snap" to, we can send it to any
selected stream. Removes the requirement of this function to a specific output
pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
Remove the "pending advance" hack and instead rely on the base stream current
position to track our position (instead of a potentially NULL "current
segment").
Also ensure the media playlists are always refreshed with valid stream time,
even if there is no current segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
The stream start and current position would be properly set when seeking or
activating a stream after playback started. But it would never be properly
initialized.
Set it to NONE initially to indicate to subclasses that no position has been
tracked yet. This will allow them to detect initial stream usage.
Futhermore, once the initial streams setup is done, make sure that it is set to
a valid initial value:
* The minimum stream time in live
* Or else the period start
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
If the driver does not support VIDIOC_CREATE_BUFS ioctl, the pool
configuration may get changed, which requires a validation. This would
fail to activate a pool in a case it shouldn't normally fail unless we
are out of memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2456>
Some mpeg-ts streams have extra data at the beginning. While it's not ideal, we
should be able to cope with it.
Therefore increase the initial search window for at least 4 consecutive
synchronization points to 1kB.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2626>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 200MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: tbd
https://gstreamer.freedesktop.org/security/sa-2022-0003.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 120MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib/bz2 decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: CVE-2022-1922, CVE-2022-1923, CVE-2022-1924, CVE-2022-1925
https://gstreamer.freedesktop.org/security/sa-2022-0002.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
Uses prelude header files with #defines to rename DASH and MSS
symbols duplicated in their old standalone versions.
Also redefines soup-related functions when building it for
adaptivedemux2 to prevent symbol conflicts there.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2534>
macOS features hidden devices. These are devices that will
not be shown in the macOS UIs and that cannot be retrieved
without having the specific UID of the hidden device. There
are cases when you might want to have a hidden device, for example
when having a virtual speaker that forwards the data to a virtual
hidden input device from which you can then grab the audio.
The blackhole project supports these hidden devices and
this patch provides a way that if the device id is a hidden
device it will use it instead of check the hardware list of devices
to understand if the device is valid.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
gtk_gl_area_get_error() doesn't return a copy of the error, but just the
error. If initialising OpenGL fails, then GtkGstGLWidget will consume
the error, and cause GTK to try and display freed memory.
==50914== Invalid read of size 8
==50914== at 0x4C4CB8A: gtk_gl_area_draw_error_screen (gtkglarea.c:663)
==50914== by 0x4C4CB8A: gtk_gl_area_draw (gtkglarea.c:687)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== by 0x4D4B6BF: gtk_stack_render (gtkstack.c:2207)
==50914== by 0x4BB4B03: gtk_css_custom_gadget_draw (gtkcsscustomgadget.c:159)
==50914== by 0x4BBA4C4: gtk_css_gadget_draw (gtkcssgadget.c:885)
==50914== by 0x4D4D780: gtk_stack_draw (gtkstack.c:2119)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== by 0x4BAF0C3: gtk_container_draw (gtkcontainer.c:3674)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== Address 0x187a0818 is 8 bytes inside a block of size 16 free'd
==50914== at 0x48480E4: free (vg_replace_malloc.c:872)
==50914== by 0x49A5B8C: g_free (gmem.c:218)
==50914== by 0x49C1013: g_slice_free1 (gslice.c:1183)
==50914== by 0x4990DE4: g_error_free (gerror.c:870)
==50914== by 0x4990FE9: g_clear_error (gerror.c:1052)
==50914== by 0x1A489780: _get_gl_context (gtkgstglwidget.c:540)
==50914== by 0x1A4863CB: gst_gtk_invoke_func (gstgtkutils.c:39)
==50914== by 0x49A3834: g_main_context_invoke_full (gmain.c:6137)
==50914== by 0x1A486450: gst_gtk_invoke_on_main (gstgtkutils.c:59)
==50914== by 0x1A48A29E: gtk_gst_gl_widget_init_winsys (gtkgstglwidget.c:632)
==50914== by 0x1A4887E7: gst_gtk_gl_sink_start (gstgtkglsink.c:267)
==50914== by 0x6579810: gst_base_sink_change_state (gstbasesink.c:5662)
==50914== Block was alloc'd at
==50914== at 0x484586F: malloc (vg_replace_malloc.c:381)
==50914== by 0x49A9278: g_malloc (gmem.c:125)
==50914== by 0x49C1BA5: g_slice_alloc (gslice.c:1072)
==50914== by 0x49C3BCC: g_slice_alloc0 (gslice.c:1098)
==50914== by 0x499096B: g_error_allocate (gerror.c:708)
==50914== by 0x4990AF1: UnknownInlinedFun (gerror.c:722)
==50914== by 0x4990AF1: g_error_copy (gerror.c:892)
==50914== by 0x4C4B9F9: gtk_gl_area_set_error (gtkglarea.c:1036)
==50914== by 0x4C4BAF7: gtk_gl_area_real_create_context (gtkglarea.c:346)
==50914== by 0x4B21B28: _gtk_marshal_OBJECT__VOIDv (gtkmarshalers.c:2730)
==50914== by 0x4920B78: UnknownInlinedFun (gclosure.c:893)
==50914== by 0x4920B78: g_signal_emit_valist (gsignal.c:3406)
==50914== by 0x4920CB2: g_signal_emit (gsignal.c:3553)
==50914== by 0x4C4B927: gtk_gl_area_realize (gtkglarea.c:308)
Reproduced by running:
MESA_GL_VERSION_OVERRIDE=2.7 totem
See https://gitlab.gnome.org/GNOME/totem/-/issues/522
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2565>
If our downstream caps didn't intersect, we attempted to convert between
raw and ADTS stream formats, if possible. If the caps still did not
intersect, we then used the modified `src_caps` but left the
`output_header_type` unmodified.
This caused a mismatch between caps and actual stream format.
Avoid this by first copying the `src_caps` to `convcaps` for the
additional intersection tests, replacing `src_caps` if we succeed.
While we're here, clean up the code a bit and remove the `codec_data`
field from outgoing ADTS caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2550>
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.
Initialize the debug categories properly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2348>
https://bugzilla.gnome.org/show_bug.cgi?id=741398 changed
rtpptdemux in 2014 to not post a GST_ELEMENT_ERROR on the
bus when dropping an invalid (non-RTP) packet, but still
returned GST_FLOW_ERROR upstream - so the pipeline still
stops, but now without a useful bus error.
Return GST_FLOW_OK instead, so the pipeline keeps
running. Some old telephony equipment can send invalid
packets before the real RTP traffic starts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2520>
get_colorspace() checks input caps transfer when mapping V4L2_XFER_FUNC_709
back to V4L2_COLORSPACE_BT2020 and GST_VIDEO_TRANSFER_BT2020_12. After
receiving source change event, decoder will G_FMT and S_FMT again. So need
to reset transfer when acquiring format to avoid using the old transfer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2475>
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.
Initialize the debug category properly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2349>
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.
But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
The pool process function may poll and get the resolution-change event
whenever it is not possible to share our buffers. This typically happen
when downstream does not support GstVideoMeta.
Not handling this would cause the decoder thread to exit silently and the
pipeline to stall.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
Output may attemp to set the width and height to zero values if
caps has no such information, which will cause capture get invalid
dimensions. Then decoder reports negotiation failure.
So need to set default resolution if caps has no such information.
Real values can be set again until source change event is signaled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2400>
When processing the first event after probing the
file and being activated, requeue sticky events
as there's no requirement that demuxers send tag
and other events again after a seek - that's
why they're sticky.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2432>
- Consistently unref the chained buffer at the end of the chain
function, if we're not handing it off to `gst_pad_push`. This avoids a
few buffer leaks in the error paths in `_chain` and `_push_history`.
- When mapping the video frame fails, return a flow error instead of
crashing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2428>
If we just break the loop, we might run into the `gop != NULL` assert
that follows it. Rather, exit immediately with flushing flow.
Also use this flushing mechanism when we release a pad. This avoids
having an extra flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.
At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.
This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
If for some reason the encoder produces frames with a pts higher than
the input one, we were dropping all the video encoder frames and ended
up crashing when trying to access the pts of a NULL pointer returned by
gst_video_encoder_get_oldest_frame().
I hit this scenario by feeding a decreasing timestamp to vp8enc which
seem to confuse the encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2405>
Hantro H1 and Rockchip VEPU2 drivers will pad the width/height to a
multiple of 16. In order to obtain the right JPEG size, the image needs
to be cropped using the S_SELECTION API. This support is added as best
effort since older drivers may emulate this by looking at the capture
queue width/height.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2329>
mp4mux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
flvmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
Mixing C loops with switch statements is a bad idea as break has a
different meaning in both. Breaking inside the switch statements wrongly
caused further loop iterations.
Instead use goto to get out of the loop and continue to do another loop
iteration, and never ever use break except for the end of a case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
In push mode (streaming), if the received chunk buffer size from _chain is bigger
than output buffer size, the flags of the divided-buffers are propagated to the
DISCONT flag from first received chunk buffer. This unexpected buffers contained DISCONT
flags are abnormally transformed when changing the sampling rate by audioresample element.
So unset unnecessary DISCONT flag before pad_push().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2305>
Previously, we only added it when actually performing synchronization
based on the NTP time.
The information can be useful downstream in other situations too, and
we can compute a NTP time as soon as we get a sender report with the
relevant information.
Co-authored-by: Mathieu Duponchelle <mathieu@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6. When binding to an IPv6 address, this
results in the following error:
gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)
This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
RFC 8216 6.3.3 "Playing the Media Playlist File" : states that for live media
playlists "the client SHOULD NOT choose a segment that starts less than three
target durations from the end of the Playlist file"
This is an off-by-one error. Since we are looking for the "index" of the
segment, we need to subtract 1 from the searched position.
Ex: For a playlist with 12 entries, we want to start playback on the 9th segment
... which is at index 8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2259>
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.
This seems to have also fixed some documentation issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.
These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).
Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.
Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
Represents touchscreen events as a trail of black squares, one for each
reported position. Additionally, this adds the `display-mouse` and
`display-touch` properties to toggle visibility of mouse/touchscreen
events, since touchscreens often emulate mouse events, as well as
logging for all received navigation events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Two RTP Header extensions are very relevant for rtprtxsend/receive.
1. "urn:ietf:params:rtp-hdrext:sdes:rtp-stream-id": will always be removed
2. "urn:ietf:params:rtp-hdrext:sdes:repaired-rtp-stream-id": will be written
instead of the "rtp-stream-id" header extension.
Currently it's only a simple replacement of one header extension for
another however a future change would only add the relevant extension
based on some heuristics (like, video frames only on one of the rtp key
frame buffers, or only until the rtx ssrc has been validated by the peer)
in order to reduce the required bandwidth.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
Previously the result of the calculations included inaccuracies caused
by the NTP clock estimation, which caused the timestamps to jitter
+/- 1/clockrate.
By reorganizing the calculations it is possible to get rid of this
inaccuracy and calculate deterministic and exact packet timestamps based
on the actual NTP clock as long as the estimation is not off by more
than 2**31 clockrate units.
The only remaining inaccuracy that is introduced now is caused by the
conversion from the NTP clock to the pipeline clock.
Also split up debug output, demote many messages to the trace debug
level and output more intermediate results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1955>
This is difficult to encounter in ordinary networks, but is
encountered when using tc-netem to add random delays to packets, and
also when your UDP stream is bonded over multiple links with varying
characteristics.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1952>
Gapless playback is handled by adjusting buffer timestamps & durations
and by adding GstAudioClippingMeta.
Support for "Frankenstein" streams (= poorly stitched together streams)
is also added, so that gapless playback support doesn't prevent those
from being properly played.
Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1028>
Add properties to control input cropping in the V4L2 device.
The input cropping is applied before composing the result to the
capture buffer. By default the capture size will be set to the same
size as the crop region, but it can be scaled to a different output
frame size if supported by the V4L2 device.
If scaling is not supported, the cropped image will
be composed as is into the top-left corner of the capture buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
Get the current crop bounding region from the V4L2 device so
that it can be provided to applications and used to validate
crop settings. Also make the default crop region available so
that it can be used to reset the crop when appropriate.
Uses the selection API when available with fallback to the crop
API for older kernels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
The gst_v4l2_object_set_crop() is used for removing buffer
alignment padding. Give it a name that better reflects
that usage. This helps to distinguish from cropping of the
input image (e.g. cropping at the image sensor on a captre
device), which can be unrelated to the memory buffer padding,
especially if scaling is involved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
This patch fixes a seg.fault in gst_structure_new() with warnings as below.
GLib-GObject-WARNING **:
../gobject/gtype.c:4330: type id '0' is invalid
GLib-GObject-WARNING **:
can't peek value table for type '<invalid>' which is not currently referenced
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1918>
The point here is that rtpsession will create a new rtpsource when
the field "rtx-ssrc" is present, and when not doing rtx, that means
a random ssrc will create a new rtpsource that will be included in RTCP
messages for the current session.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1882>
When doing only a single stream of audio/video this hardly matters,
but when doing many at the same time, the fact that you have to get
a hold of the glib global type-system lock every time you process a buffer,
means that there is a limit to how many streams you can process in
parallel.
Luckily the fix is very simple, by doing a cast rather than a full
type-check.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1873>
There is a chance that pool->buffers[index] sets BUFFER_STATE_QUEUED, but
it has not been queued yet which makes pool->buffers[index] still NULL.
At this time, if pool_streamff release all buffers with BUFFER_STATE_QUEUED
state regardless of whether the buffer is NULL or not, it will cause segfault.
To fix this, also check buffer when streamoff release buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1842>
When the size of V4L2 capture or output is changes with VIDIOC_S_FMT,
the device is only required to update the compisition window to fit
inside the new frame size. This can result in captured data only being
updated on a portion of the frame after a resize.
Update the composition window to the default value determined by the
V4L2 device driver whenever the format is changed to make sure that
all image data is composed to its full size.
Fixes#765
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1806>
Not having this field is equivalent with it being 1/1 so consider
it like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
Not having these fields is equivalent with them being mono/0 so consider
them like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
If the tracks element was parsed from the SeekEntry, don't
parse it a second time and recreate tracks, as this
loses any tags that were read using the seek table.
If a genuinely new Tracks element is found, do read that
as it is needed for MSE support.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
Do not maintain similar build instructions within each gst-plugins-*
subproject and the subproject/gstreamer subproject. Use the build
instructions from the mono-repository and link to them via hyperlink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
LOAD macro relies in m7 being zero for interleaving purposes. Using LOAD
on the m7 register makes it interleave with its new content instead of
with 0.
The effect of this bug was bobbing on some static lines that appeared
over fast-moving content.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1816>
The dynamic resolution changes when
the sequence starts when the decoder detects a coded frame with one or
more of the following parameters different from those previously
established (and reflected by corresponding queries):
1.coded resolution (OUTPUT width and height),
2.visible resolution (selection rectangles),
3.the minimum number of buffers needed for decoding,
4.bit-depth of the bitstream has been changed.
Although gstreamer parser has parsed the stream resolution.
but there are some case that we need to handle resolution change event.
1. bit-depth is different from the negotiated format.
2. the capture buffer count can meet the demand
3. there are some hardware limitations that the decoded resolution may
be larger than the display size. For example, the stream size is
1920x1080, but some vpu may decode it to 1920x1088.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
v4l2videodec do some refactoring so that it can support
dynamic resolution change event.
1.wrap the setup process of capture as a function,
as decoder need setup the capture again when
dynamic resolution change event is received.
2.move the function "remove_padding"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
This allows downstream of a payloader to know the RTP header's marker
flag without first having to map the buffer and parse the RTP header.
Especially inside RTP header extension implementations this can be
useful to decide which packet corresponds to e.g. the last packet of a
video frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1776>
osxaudiodeviceprovider now probes devices more than once to determine
if the device can function as both an input AND and output device.
Previously, if the device provider detected that a device had any output
capabilities, it was treated solely as an Audio/Sink. This causes issues
that have both input and output capabilities (for example, USB interfaces
for professional audio have both input and output channels). Such devices
are now listed as both an Audio/Sink as well as an Audio/Source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1385>
The RTP payload seems to be required as it carries the frame count
information. Also, gst_rtp_base_payload_allocate_output_buffer had
the second argument incorrect.
Strangely some devices like Shanling MP4 and Sony XM3 would still
work without this while some like the Sony XM4 do not.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1797>
As this element is single threaded, we only need to stop the objects to
allow changing the format again. Fixes assertion notably on shutdown and
on some other situation where the format may be set twice without
actually activating the element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
If the video4linux device supports norms but has no norm set, norm is
returned as an uninitialized variable after the ioctl call, leading to
gst_v4l2_tuner_get_norm_by_std_id() returning a random norm from the
supported norms. Catch this case and instead return NULL to indicate
that no norm is setup.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1625>
Each stream may have its own segment timeline
(i.g., different segment.start or segment.base)
depending on edit-list and composition-to-decode atom.
Make sure whether time position of a stream has been actually
far behind than that of current target stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1352>
The libjpeg-turbo internal state might not be correctly initialized for
the first frame in a stream, pull the frame stride from gstreamer frame
metadata instead, which is correct even for the first frame, and which
makes this code consistent with the surrounding lines.
Fixes: e6d83d8f96 ("jpegdec: Support libjpeg-turbo colorspace conversion")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
It is imperative that the libjpeg-turbo state is properly initialized
before jpeg_start_decompress() is called. Make sure cinfo.out_color_space
and cinfo.raw_data_out are set to their final values matching their peer
caps before calling jpeg_start_decompress().
Fixes: e6d83d8f96 ("jpegdec: Support libjpeg-turbo colorspace conversion")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
Pull out peer caps checking code into gst_jpeg_turbo_parse_ext_fmt_convert().
This code is used by libjpeg-turbo extras to determine whether peer is capable
of handling buffers into which libjpeg-turbo can directly decode data. This
kind of check must be performed before jpeg_start_decompress() is called in
gst_jpeg_dec_prepare_decode() as well as in gst_jpeg_dec_negotiate(), hence
the common code.
This commit does modify the code a little to make it easier to call from both
call sites without much duplication, hence the extra `if (*clrspc)` test.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
This reverts commit 2aa2477208.
The commit is completely wrong, libjpeg-turbo is perfectly capable
of decoding I420 (YUV) to RGB. The test case provided alongside the
aforementioned commit passes without this revert because it decodes
image of JCS_YCrCb color space, so the new `if (clrspc == JCS_RGB)`
condition is false on that image, and the libjpeg-turbo decoding
does not get used. The real bug is hidden by that commit.
The real problem is in the call order of gst_jpeg_dec_prepare_decode()
and gst_jpeg_dec_negotiate(). The gst_jpeg_dec_prepare_decode() calls
jpeg_start_decompress() which sets up internal state of the libjpeg,
however, neither cinfo.out_color_space nor cinfo.raw_data_out are
set correctly yet. Those two are set up in gst_jpeg_dec_negotiate()
which is called a bit later. Therefore, the real fix is the set up
cinfo.out_color_space and cinfo.raw_data_out before calling
jpeg_start_decompress(). This is however a separate patch.
Fixes: 2aa2477208 ("jpegdec: only allow conversions from RGB")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1687>
Constantly updating the ts_offset results in audiable glitches
when streaming audio using ntp-sync=true. By requiring a minimum
offset before updating ts_offset this can be mitigated. Added a
parameter which can be used to set min_ts_offset in ntp-sync mode.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1409>
Hotdoc should be able to extract and parse comments out of these. Just
need to be careful to only add the glob in directories that actually
contain *.m (objc) and *.mm (objcpp) files.
Also fix some doc comments and remove redundant ones.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1614>
This is listed as a public interface implemented by osxaudio, so we
need to mark it as a plugin API so that it's listed in the
documentation correctly.
This is an ancient symbol, so add it to the symbol index too.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1601>
Starting with libsoup3, there is no attempt to handle thread safety
inside the library, and it was never considered fully safe before
either. Therefore, move all session handling into its own thread.
The libsoup thread has its own context and main loop. When some
request is made or a response needs to be read, an idle source
is created to issue that; the gstreamer thread issuing that waits
for that to be complete. There is a per-src condition variable to
deal with that.
Since the thread/loop needs to be longer-lived than the soup
session itself, a wrapper object is provided to contain them. The
soup session only has a single reference, owned by the wrapper
object.
It is no longer possible to force an external session, since this
does not seem to be used anywhere within gstreamer and would be
tricky to implement; this is because one would not have to provide
just a session, but also the complete thread arrangement made in
the same way as the system currently does internally, in order to
be safe.
Messages are still built gstreamer-side. It is safe to do so until
the message is sent on the session. Headers are also processed on
the gstreamer side, which should likewise be safe.
All requests as well as reads on the libsoup thread are issued
asynchronously. That allows libsoup to schedule things with as
little blocking as possible, and means that concurrent access
to the session is possible, when sharing the session.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/947
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1555>
This is due to an unsafe usage of the pad task. We didn't ensure proper
ownership of the task. That race involved the task being released too early,
and was detected, luckily, by the glib mutex implementationt that
reported the mutex being disposed while being locked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1478>
On Android (especially) and for static builds in general it is safer to link
against libsoup and have the dynamic custom loading disabled. For those cases we
can safely assume the application will use either libsoup2 or libsoup3 and not
both.
Fixes#939
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1536>
When multiple streams are bundled together, there may be more
than one red payload type to handle.
In addition, as the red decoder works by filling in gaps in
the seqnums, there needs to be one rtp_history queue per sequence
domain.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1429>
In redenc, when input buffers have a header for the TWCC extension,
we now add one to our wrapper buffers.
In ulpfecenc we add one in that case to our protection buffers.
This makes TWCC functional when UlpRed is used in webrtcbin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1414>
In order to allow "level-asymmetry-allowed" we now handle a new
"profile" field, which as the same semantics as the "profile" field in
H.264 stream so that we can force payloaded stream to have the right
format when using the `gst_sdp_media_get_caps_from_media` to set caps
filter after the payloader. This allows a simple negotiation in standard
RTP negotiation based on SDPs (like webrtc) for that particular case,
closely respecting the specs.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1410>
XNextEvent() blocks indefinitely in absence of X11 events, which can
prevent the pipeline from stopping.
This can cause problems when ximagesrc is used in "remote desktop"
scenarios and the GStreamer application itself, through which the user
is viewing and controlling the machine, is the only source of input
events.
Replace the call with non-blocking XCheckTypedEvent().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1438>
since `gst_caps_replace()` and `gst_pad_set_caps()` both ref the caps and neither of them takes the ownership of the caps -> it must be unreffed in `gst_multi_file_src_set_property()`
to test the leak (on Unix): `echo coucou > /tmp/file.txt && GST_TRACERS=leaks GST_DEBUG="GST_TRACER:7" gst-launch-1.0 multifilesrc location=/tmp/file.txt caps='txt' ! fakesink`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1436>
Also ignore 0x0 sizes in the fallback case and assume the size can be
anything between 1x1 and MAXxMAX.
This fixes the case where a width=0, height=0 caps are created. Whith
this patch the caps will contain width=[1,MAX], height=[1,MAX].
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1396>
Follow-up on 97d83056b3, only check
for intersection with the current srccaps when checking if a sinkpad
can accept caps.
I must have been lucky in my firefox testing then, and always entered
the code path with audio getting negotiated first, thus not failing
the is_subset check when srccaps had been negotiated as
application/x-rtp, and an accept-caps query was made for the video
caps with a defined extmap.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1384>
If qt asks us to redraw before we have both set a buffer and caps we
would attempt to use the new caps with the old buffer which could result
in bad things happening.
Only update caps from new_caps once the buffer has actually been set.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1346>
A previous patch has caused rtpfunnel to output twcc-related
information downstream, however this leaked into upstream
negotiation (through funnel->srccaps), causing payloader to
negotiate twcc caps even when not prompted to do so by the user.
Fix this by only enforcing that upstream sends us application/x-rtp
caps as was the case originally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1278>
Negative composition time offsets are only allowed with version 1 of the
box, however we parse it as a signed value also for version 0 boxes as
unfortunately there are such files out there and it's unlikely to have
(valid) huge composition offsets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1294>
g_sequence_remove_range's end iter is exclusive, so if one
wants to remove that item as well, it should be called with
the next iter.
This could in theory fix an issue where:
* The sequence isn't entirely trimmed, with an old item lingering
* Following FEC packets are immediately discarded because they
arrived later than corresponding media packets, long enough for
seqnums to wrap around
* We now try to reconstruct a media packet with a completely obsolete
FEC packet, chaos ensues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1341>
We need to hold onto the last buffer until the next buffer arrives.
Before, if a caps change comes we would remove the currently rendering
buffer. if Qt asks use to render something, we would render the dummy
black texture.
Fixes a period of black output when upstream is e.g. changing resolution
as in hls adaptive bitrate scenarios.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1338>
The `gst_v4l2_buffer_pool_dqbuf` function contains this ominous comment:
/* get our GstBuffer with that index from the pool, if the buffer was
* outstanding we have a serious problem.
*/
outbuf = pool->buffers[group->buffer.index];
Unfortunately it is common for buffers in _output_ buffer pools to be
both queued and outstanding at the same time. This can happen if the
upstream element keeps a reference to the buffer, or in an encoder
element itself when it keeps a reference to the input buffer for each
frame.
Since the current code doesn't handle this case properly we can end up
with crashes in other elements such as:
(gst-launch-1.0:32559): CRITICAL **: 17:33:35.740: gst_video_frame_map_id: assertion 'GST_IS_BUFFER (buffer)' failed
and:
(gst-launch-1.0:231): GStreamer-CRITICAL **: 00:16:20.882: write map requested on non-writable buffer
Both these crashes are caused by a race condition related to releasing
the same buffer twice from two different threads. If a buffer is queued
and outstanding this situation is possible:
**Thread 1**
- Calls `gst_buffer_unref` decrementing the reference count to zero.
- The core GstBufferPool object marks the buffer non-outstanding.
- Calls the V4L2 release buffer function.
- If the buffer is _not_ queued:
- Release it back to the free pool (containing non-queued buffers).
**Thread 2**
- Dequeues the queued output buffer.
- Marks the buffer as not queued.
- If the buffer is _not_ outstanding:
- Calls the V4L2 release buffer function.
- Release it back to the free pool (containing non-queued buffers).
If both of these threads run at exactly the same time there is a small
window where the buffer is marked both not outstanding and not queued
but before it has been released. In this case the buffer will be freed
twice causing the above crashes.
Unfortunately the variable recording whether a buffer is outstanding is
part of the core `GstBuffer` object and is managed by `GstBufferPool` so
it's not as straightforward as adding a mutex. Instead we can fix this
by additionally recording the buffer state in `GstV4l2BufferPool`, and
handle "internal" and "external" buffer release separately so we can
detect when a buffer becomes not outstanding.
In the new solution:
- The "external" buffer pool release and the "dqbuf" functions
atomically update the buffer state and determine if a buffer is still
queued or outstanding.
- Subsequent code and a new
`gst_v4l2_buffer_pool_complete_release_buffer` function can proceed to
release (or not) a buffer knowing that it's not racing with another
thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1010>
The pipeline flow for receiving looks like this:
rtpsession ! rtpssrcdemux ! session_fec_decoder ! rtpjitterbuffer ! \
rtpptdemux ! stream_fec_decoder ! ...
There are two places where a fec decoder could be placed.
1. As requested from the 'request-fec-decoder' signal: after rtpptdemux
for each ssrc/pt produced
2. after rtpssrcdemux but before rtpjitterbuffer: added for the
rtpst2022-1-fecenc/dec elements,
However, there was some cross-contamination of the elements involved and
the request-fec-decoder signal was also being used to request the fec
decoder for the session_fec_decoder which would then be cached and
re-used for subsequent fec decoder requests. This would cause the same
element to be attempted to be linked to multiple elements in different
places in the pipeline. This would fail and cause all kinds of havoc
usually resulting in a not-linked error being returned upstream and an
error message being posted by the source.
Fix by not using the request-fec-decoder signal for requesting the
session_fec_decoder and instead solely rely on the added properties for
that case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1300>
... in favour of dep.get_variable('foo', ..) which in some
cases allows for further cleanups in future since we can
extract variables from pkg-config dependencies as well as
internal dependencies using this mechanism.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
WebVTT in ISO MP4 is specified in ISO 14496-30,
and needed for DASH support. It's stored in an
mp4 specific format. To handle it compatibly,
the wvtt boxes are converted back into WebVTT text
and pushed as application/x-subtitle-vtt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1182>
Swap the `need_process` boolean check on qtdemux streams
for a direct function pointer to the splitting function,
so we can stop adding extra cases to the single growing
`gst_qtdemux_process_buffer()` function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1182>
For monorepo build and ugly/bad, for advanced feature
option API like get_option('xyz').required(..) which
we use in combination with the 'gpl' option.
For rest of modules for consistency (people will likely
use newer features based on the top-level requirement).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1084>
Guard against the orientation not coming from an inexistant tag, nor
from the application (rotation set to "auto") which caused an assertion.
When the application requests the auto rotation method, make sure it is
resolved to a rotation that's applicable.
ERROR:gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstglwidget.c:745:gtk_gst_gl_widget_set_rotate_method: code should not be reached
Fixes: 103ceb853a
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1134>
The src and sink elements no longer link against libsoup. It is now loaded at
runtime. If any version is resident already, it is used. Otherwise we first try
to load libsoup3 and if it's not found we fallback to libsoup2.
For the unit-tests, we now build one version of the test unit file per libsoup
version found. So if both libsoup2 and libsoup3 are available on the host, the
CI will cover them both.
Based on initial patch by Daniel Kolesa <dkolesa@igalia.com> and
Patrick Griffis <pgriffis@igalia.com>.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1044>
