In this context, the bitrate variable is for all encoders, but the
max_bitrate field is per encoder. To calculate a proper FEC ratio, we
need to scale max_bitrate to the number of encoders.
+ Also clamp the fec-percentage that we set on the transceiver for extra
safety
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1151>
* A queue dedicated to transcript items not intended for translation.
* A queue dedicated to transcript items intended for translation. The items are
enqueued after a separator is detected or translate-lookahead was reached.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1137>
This commit adds an optional experimental translation tokenization feature.
It can be activated using the `translation_src_%u` pads property
`tokenization-method`. For the moment, the feature is deactivated by default.
The Translate ws accepts '<span></span>' tags in the input and adds matching
tags in the output. When an 'id' is also provided as an attribute of the
'span', the matching output tag also uses this 'id'.
In the context of close captions, the 'id's are of little use. However, we can
take advantage of the spans in the output to identify translation chunks, which
more or less reflect the rythm of the input transcript.
This commit adds simples spans (no 'id') to the input Transcript Items and
parses the resulting spans in the translated output, assigning the timestamps
and durations sequentially from the input Transcript Items. Edge cases such as
absence of spans, nested spans were observed and are handled here. Similarly,
mismatches between the number of input and output items are taken care of by
some sort of reconcialiation.
Note that this is still experimental and requires further testings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1109>
This commit adds an optional transcript translation feature implemented as
request src Pads.
When requesting a src Pad, the user can specify the translation language code
using Pad properties 'language-code'.
The following properties are defined on the Element:
- 'transcribe-latency': formerly 'latency', defines the expected latency for
the Transcribe webservice.
- 'translate-latency': defines the expected latency for the Translate
webservice.
- 'transcript-lookahead': maximum transcript duration to send to translation
when a transcript is hitting its deadline and no punctuation was found.
When the input and output languages are the same, only the 'transcribe-latency'
is used for the Pad. Otherwise, the resulting latency is the addition of
'transcribe-latency' and 'translate-latency'.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1109>
This helps gather together the details related to the `TranscriberLoop`.
One difference with previous implementation is that the ws `Client` is
build each time the loop is started instead of being reused. With the new
approach, we don't keep the connection open after EOS and we should be
more resistant in case of a connection failure.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1104>
Instead of sending transcription events to the src pad loop, this commit
enqueues the transcribed buffers immediately in the ws loop, then notifies
the src pad loop. The src pad loop is only in charge of dequeuing the buffers.
This should help with upcoming evolutions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1104>
If creating a playlist or fragment stream fails (disk is full, the
directory is removed, ...), we will currently crash because the signal
handler expects a non-None GIOStream. The actual callback is allowed to
return None values and we handle this in the caller, so let's not have
this restriction on the signal handler.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1093>
for uploaded object default content-type is set to binary/octet-stream,
which is correct.
metadata cannot be used to set content-type and content-disposition as
setting metadata add a prefix x-amz-meta to key
e.g. setting metadate "content-type=video/mp4" actually set value as
x-amz-meta-content-type. So these has to be seaprate property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1085>
Commit ad3f1cf fixed the name of hlssink child element to be the same
for hlssink2 and hlssink3. However, we rely on element name to return
boolean in case of hlssink3 or None in case of hlssink2 as the return
value of the delete-fragment closure.
Fix this by using the factory name instead of the element name.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1076>
Simplifies state tracking and potentially reduces latency as it's not
necessary to wait until all fragments of an OBU are received.
The last OBU of a TU is marked with the marker flag to allow parsers to
detect this without first seeing the beginning of the next TU.
Also use a simple `Vec` for collecting complete OBUs instead of a
`gst_base::Adapter` as this reduces the number of allocations.
And also handle invalid packets a little bit more gracefully.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/244
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1072>
We dispose of consumer pipelines asynchronously, potentially after the
session objects have been disposed of.
As session objects are the owner of the cc element, it is entirely
possible for the bwe-request signal to get emitted after cc has been
disposed of, as the closure only takes a weak reference to it.
Fix by simply checking if cc is None
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1044>
Without this auto-pluggers such as decodebin or parsebin will be unable to
process AV1 RTP payloads.
Tested with: `videotestsrc num-buffers=50 ! videoconvert ! av1enc ! av1parse ! rtpav1pay ! queue ! decodebin3 ! videoconvert ! queue ! autovideosink`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1034>
Right now the code manually pieces together the components
in a String for efficiency. When credentials contain special
characters this can result in invalid URLs, so do it the proper
way (with Url::parse + format) to make sure components are escaped
as needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/949>
WHIP endpoint providers like Cloudflare do not support Trickle ICE
and need candidates to be send along with the initial offer. Instead
of sending the offer in create-offer promise, send it once the ICE
candidates have been gathered.
While at it add properties to set STUN and TURN server along with the
ICE transport policy as at least when testing the Cloudflare WHIP
endpoint seems unreachable without it. This has also been observed
with Cloudflare provided demos.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/949>
This implements WHEP specification based on
https://datatracker.ietf.org/doc/html/draft-murillo-whep-00
and has been tested with Cloudflare.
Server offers are likely to be removed from the WHEP specification
in upcoming revisions, to avoid compatibility issues. None of the
commercial services implementing WHEP support server initiated offers.
So we only support client side initiated offers.
Follows session setup and tear down as covered in Figure 1, Section 3
of the specification.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/949>
error[E0425]: cannot find value `LIBRARY_NAME` in this scope
--> net/ndi/src/ndisys.rs:336:23
|
336 | path.push(LIBRARY_NAME);
| ^^^^^^^^^^^^ not found in this scope
error[E0425]: cannot find value `LIBRARY_NAME` in this scope
--> net/ndi/src/ndisys.rs:339:33
|
339 | path::PathBuf::from(LIBRARY_NAME)
| ^^^^^^^^^^^^ not found in this scope
Commit 24b7cfc8 applied changes related to nullability as declared
by gir. One consequence was that some functions signature ended up
requiring users to pass `Some(val)` when they could use `val`
before.
This commit applies changes on `gstreamer-rs` which, will honoring
the nullability stil allow users to pass `val` for the few affected
functions.
This commit also fixes the signature for `Element::request_new_pad`
which was updated upstream.
And use a `Vec` plus offset for consuming partial byte buffers.
Removing the first element from a `Vec` repeatedly is not very cheap.
Also simplify calculation of the current packet by removing a mostly
unused type and keeping track of the calculations always locally instead
of sometimes storing it in the element state.
- NDI HX Camera Android in the past used 1ns instead of 100ns as unit
for timecodes/timestamps.
- NDI HX Camera iOS uses 0 for all timecodes and the same non-zero
value for all audio timestamps
Detect such situations and try to compensate for them. Also add a new
"auto" timestamping mode that prefers to use timecodes and otherwise
falls back to timestamps or receive times.
Fixes https://github.com/teltek/gst-plugin-ndi/issues/79
Audio/video are in practice not always from the same clock and can have
different behaviours with regards to clock rate and jitter. Handling
them separately generally gives better results for the timestamps output
by the source element.
This is no longer available as this could lead to building a defined
value in Rust which could be interpreted as undefined in C due to
the sentinel `u64::MAX` for `None`.
Use the constants (e.g. `ONE`, `K`, `M`, ...) and operations to build
a value and deref (`*`) to get the quantity as an integer.
Always first try draining queued data in the loop and only start waiting
if there's nothing to drain right now. Otherwise data might have to be
drained right now but we still wait and nothing is ever waking up the
source pad task again.
Also make sure to not wait multiple times on the same gst::ClockId but
instead unset it after waiting on it and no new one was scheduled in the
meantime. Future waits on the same ClockId will immediately return and
instead we should wait on the condvar if no new ClockId is available.
When call_timeout is triggered, request will fail
irrespective of the retry setting. call_timeout define
max time request can take along with retry.
It can be solved by either setting call_timeout to
retry * call_attempt_timeout or not setting the call_timeout.
As per thread call_attempt and rety setting is enough.
https://github.com/awslabs/aws-sdk-rust/issues/558
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1410
Created a new plugin 'webrtchttp' to implement all the
WebRTC HTTP protocols under /net/webrtc-http directory.
WhipSink wraps around 'webrtcbin' with HTTP capabilites
to exchange SDP offer/answer so an ICE/DTLS session can
be established between the encoder/media producer (WHIP client)
and the broadcasting ingestion endpoint (Media Server).
Once the ICE/DTLS session is set up, the media will
flow unidirectionally from the WHIP client to the
broadcasting ingestion endpoint (Media Server).
Spec:
https://www.ietf.org/archive/id/draft-ietf-wish-whip-04.html
The encoding of ONVIF metadata is always UTF-8. ONVIF metadata may
or may not be encoded with gzip, but we don't see a use case for
transporting compressed ONVIF metadata between elements for now.
The aggregator was consuming meta buffers too greedily, causing
potential interleaving starvation upstream. Refactor to consume
media and meta buffers synchronously
Also expect parsed=true metadata caps (requiring an upstream
onvifmetadataparse element).
warning: you are deriving `PartialEq` and can implement `Eq`
--> net/raptorq/src/fecscheme.rs:13:24
|
13 | #[derive(Clone, Debug, PartialEq)]
| ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
|
= note: `#[warn(clippy::derive_partial_eq_without_eq)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq
warning: you are deriving `PartialEq` and can implement `Eq`
--> net/raptorq/src/fecscheme.rs:38:24
|
38 | #[derive(Clone, Debug, PartialEq)]
| ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq
A regression was introduced during the migration to AWS SDK. One used
to be able to provide credentials in multiple ways with the earlier
Rusoto ChainProvider (config file / environment variables). Now one
has to explicitly set the properties.
Use the DefaultCredentialsChain from AWS SDK to restore the previous
functionality.
See
https://docs.rs/aws-config/0.46.0/aws_config/default_provider/credentials/struct.DefaultCredentialsChain.html.
Allow specifying an endpoint to be used for S3 requests. This makes
it possible to use integrations providing object storage based on S3
API like MinIO.
When the endpoint-uri property is specified, the endpoint resolver to
use will be overridden when making S3 requests.
Ideally, when player encounter PLAYLIST-TYPE is VOD, player should
not reload the playlist. For playlist-type=vod, initially we put
PLAYLIST-TYPE=EVENT, and later change it to VOD, which confuse some
players so we shold put ENDLIST here.
In any case putting ENDLIST is right thing to do to indicate no new
segment will be added to playlist.
in current implementation EXT-X-ENDLIST is never set for any playlist-type.
After calling playlist.stop(), during write_final_playlist() is called.
in final playlist write, segment is not added but update_playlist is called.
and update_playlist reset end_list again, so plugin never put ENDLIST.
STS provide temporary credentials to access AWS resource. Temporary
credentials include, AccessKeyId, SecretAccessKey and SessionToken.
With session-token property, element will be able to use temporary
credentials. When session-token is not set, element can use long
term credentials.
