Using RTP header extensions is currently not convenient. Users have to
handle signals from the RTP payloader and instantiate the extension
element themselves, making it impossible to use with gst-launch.
Adding a property allowing the payloader to automatically try creating
extensions. This should help simple use cases and testing using
gst-launch.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1022>
These parameters are incorrectly regarded as mutable in G-IR making them
"incompatible" with languages that are explicit about mutability like
Rust. In order to clean up the code and expected API there, update the
signatures here, right at the source (instead of overriding them in
Gir.toml and hoping for the best).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1005>
This will only make use of the framerate if the subclass is chaining up
BaseSink::set_caps(). Otherwise it will have the same behaviour as the
basesink default.
Doing so is useful if video buffers don't contain a duration to
calculate a default duration, and various video sinks already implement
a custom version of this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/986>
Elements operating in pull mode may optionally pass a buffer to
pull_range that should be filled with the data. The only element
that does that at the moment is oggdemux operating in pull mode.
tagdemux currently creates a sub-buffer whenever a buffer pulled
from upstream (filesrc, usually) needs to be trimmed. This creates
a new buffer, however, so disregards any passed-in buffer from a
downstream oggdemux.
This would cause assertion failures and playback problems for
ogg files that contain ID3 tags at the end.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/848
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/994>
This situation happens in the situation where an input stream has a framerate
exceeding the timeout latency (Ex: 1fps with a latency of 500ms) and an input
stream greater than output framerate (ex: 60fps in, 30 fps out).
The problem that would happen is that we would timeout, but then buffers from
the fast input stream would only be popped out one by one.... until a buffer
reaches the low-framerate input stream at which point they would quickly be
popped out/used. The resulting output would be "slow ... fast ... slow ... fast"
of that input fast stream.
In order to avoid this situation, whenever we detect a late buffer, check if
there's a next one and re-check with that one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/990>
Fix the following build failure with gcc 4.8 which has been added with
d268c193ad:
../gst-libs/gst/video/gstvideoaggregator.c: In function 'gst_video_aggregator_init':
../gst-libs/gst/video/gstvideoaggregator.c:2762:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (gint i = 0; i < gst_caps_get_size (src_template); i++) {
^
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/974>
We've been allowing only a few known chroma-site values such as
jpeg (not co-sited), mpeg2 (horizontally co-sited) and
dv (co-sited on alternate lines). That's insufficient for
representing all possible chroma-site values. By this commit,
we can represent any combination of chroma-site flags.
But, an exception here is that any combination with
GST_VIDEO_CHROMA_SITE_NONE will be considered as invalid value.
For any combination of chroma-site flags,
gst_video_chroma_to_string() method is deprecated in order to
return newly allocated string via a new gst_video_chroma_site_to_string()
method. And for consistent API naming, gst_video_chroma_from_string()
is also deprecated. Newly written code should use
gst_video_chroma_site_from_string() instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/927>
audiobasesrc's setcaps contains an optimization that makes it not re-
acquire the ringbuffer if the caps have not changed. However, it doesn't
check if it has successfully acquired it or not. It's possible to have
the caps set but not having ringbuffer acquired if the previous attempt
to acquire fails.
This commit replaces the caps existence check with whether the
ringbuffer is acquired or not. There's no need to check for caps
existence because 1.) it's unlikely to be NULL if the ringbuffer is
acquired, and 2.) _setcaps shouldn't be called with a NULL caps.
This should also let the element retry on acquiring ringbuffer after an
error by re-setting the element's state to READY and back to PLAYING.
Whether this behavior is correct is up for debate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/512>
New signals are added for managing the internal list of rtp header
extension implementations read by a specific depayloader instance.
If the 'extmap-$NUM' field is present in the src caps, then an
extension implementation will be requested but is not required to be able
to negotiate correctly. An extension will be requested using the
'request-extension' signal if none could be found internally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/748>
New signals are added for managing the internal list of rtp header
extension implementations read by a specific depayloader instance.
If the 'extmap-$NUM' field is present in the sink caps, then an
extension implementation will be requested but is not requited to be
able to negotiate correctly. An extension will be requested using the
'request-extension' signal if none could be found internally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/748>
https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/681
added a layoutSubViews, which never gets called, because it should have been
called layoutSubviews (non-capital "v"). However after fixing that, it still
doesn't work correctly, because window_width/height values are immediately
updated and then draw_cb will never trigger the resize path, because the
values are already up to date.
Update the values inside the resize path again instead, so the check for
entering the resize path is logically always correct.
This makes the layoutSubviews unnecessary, as it only updated the internal
size values prematurely, so it is deleted instead of method naming fixed.
These changes were originally done to avoid accessing UIKit objects on the
main thread, but no additional accesses are added here, only internal
private variable assignments under the same draw_lock, so there should be
no threading issues reintroduced.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/945>
A CGSize contains CGFloat values (a typedef to double or float), which means
that the values aren't equal, despite it being equal after they are cast to
int by assigning them to window_height/width private members. This leads to
excessive gst_gl_window_resize calls on each frame, at least if the CGFloat
value has a .5 decimal value, e.g. 103.5.
Fix it by storing them as CGFloat instead of gint.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/945>
Currently max-errors gets set during init to default or via property.
However, if a decoder element calls gst_audio_decoder_reset with 'full'
argument set to TRUE, it would result in all the fields of context being
zeroed with memset. This effectively results in max-errors getting a
value of 0 overriding the default or user requested value set during
init.
This would result in calls to GST_AUDIO_DECODER_ERROR which track error
counts and allow max-errors, to be ineffective.
To fix this move max-errors out of GstAudioDecoderContext, as changes to
context should not affect this. The error_count is anyways also in
GstAudioDecoderPrivate and not in context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/946>
.. and make use of that API in videoaggregator.
When setting certain properties, such as cropping or the scaled
size of pads, a new converter is created by videoaggregator.
Before that patch, this implied spawning new threads, potentially
at each aggregate cycle when interpolating pad properties. This
is obviously wasteful, and re-using a task pool removes that
overhead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/896>
Take `GST_OBJECT_LOCK` when writing `vagg->info`, so that reading in
subclasses is protected against races, as documented in the struct.
/*< public >*/
/* read-only, with OBJECT_LOCK */
GstVideoInfo info;
`gst_video_aggregator_default_negotiated_src_caps` should take the
`GST_VIDEO_AGGREGATOR_LOCK` to avoid racing with
`gst_video_aggregator_reset` called by
`gst_video_aggregator_release_pad` of the last sinkpad. Otherwise it can
happen that `latency = gst_util_uint64_scale (...` gets called with a
zero framerate.
There doesn't seem to be any reason not to use the local `info` instead
of `vagg->info`, so do that.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/915>
