Upstream might not give us a caps event (dtlssrtpdec) because it might be an
RTP/RTCP mixed stream, but we split the two streams anyway and should report
proper caps downstream if possible.
Fixes "sticky event misordering" warnings with dtlssrtpdec.
And provide home-made fallback for older GLib versions,
so that we can later find these and remove them when
we bump the GLib requirement (which is certainly going
to happen before 2.0).
https://bugzilla.gnome.org/show_bug.cgi?id=748495
It's better to just select some random variant playlist instead of stopping,
chances are that it's still continuing to work and we might just have to
select a different variant again later.
We should only refresh the currently selected variant playlist (if any,
otherwise the main playlist), not the main playlist. And only try to
refresh the main playlist if updating the variant playlist fails.
Some servers (Wowza) use the request of the main playlist to create a
"session", which is then part of the URI of the variant playlist and
also the fragments. Refreshing the main playlist would generate a new
session, and the server rate limits that usually. And after a few retries
the server just kicks us out.
Also as a side effect we now use the same downloader for all playlists, so
that we only have 2 instead of 3 connections to the server. And also
previously we just ignored the downloaded data from the main playlist that
the base class gave to us.
When the segment is very short it might be the case that the
typefinding fails and when finishing the segment hlsdemux would
consider the remaining data (pending_buffer) as an encryption
leftover.
This patch fixes it and makes sure an error is properly posted
if typefind failed by refactoring buffer handling to a function
and using it from the data_received and finish_fragment functions.
We also have to update the current_file GList pointer in the M3U playlist
client, otherwise we are just continuing playback from the current position
instead of seeking.
Variable hands is already checked to contain a value previously at the beginning
of the current block. There is no need to check again. This is logically dead code.
CID 1197693
Caps refcounting was all wrong in this function. Rewrote it and add some
comments to make it clearer.
Fix caps leaks with the
validate.file.glvideomixer.simple.play_15s.synchronized scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=747915
Signed-off-by: Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
If old opencv1-style legacy include directory is available,
this change becomes purely cosmetic (maybe will compile a bit faster).
It becomes an FTBFS fix when opencv1-style include directory is missing
(possibly because opencv package maintainer decided not to pack it).
https://bugzilla.gnome.org/show_bug.cgi?id=747705
Fix a caps leak with the
validate.file.glvideomixer.simple.play_15s.synchronized scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=747915
Signed-off-by: Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
'array_buffers' contain borrowed GstBuffer and so shouldn't have a free
function. 'frames' is the one containing GstGLMixerFrameData and so should use
_free_glmixer_frame_data as free function.
Fix GstGLMixerFrameData leaks with the
validate.file.glvideomixer.simple.play_15s.synchronized scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=747913
Signed-off-by: Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
Fix a simple buffer overflow - 16 bytes isn't enough to hold
the string representation of a gulong on x86_64. I guess the
intent was to generate a 32 bit random key, so let's do that.
Only matters if anyone ever ports the sink to 1.x
https://bugzilla.gnome.org/show_bug.cgi?id=676524
There is a playback error when trying to play a content that
has 'application' mimeType. This commit prevents an exception from
setup text streams.
https://bugzilla.gnome.org/show_bug.cgi?id=747525
As mentionned in release notes : Added new Sps/Pps strategies for real-time
video (replace the old setting variable 'bEnableSpsPpsIdAddition' with
'eSpsPpsIdStrategy')
upstream might send buffer lists instead of buffers and hlssink's
probe won't get called and a new segment won't be created when needed.
This patch fixes it by adding a chain_list function to the sink pad
that will just pass through the whole bufferlist if no segment needs
to be requested at the moment or convert the list into buffers to
check the proper timestamp to request the next key-unit that will
start the segment.
https://bugzilla.gnome.org/show_bug.cgi?id=746906
This way we let opusdec do the resampling if needed and don't carry
around buffers with a too high sample rate if not required.
While Opus always uses 48kHz internally, this information from the
header specifies which frequencies are safe to drop.
No need to ref/unref the connection every time we push something on the pool.
However we have to provide non-NULL data to the pool, so let's just give it
some coffee.
This way we will share threads with other DTLS connections if possible, and
don't have to start/stop threads for timeouts if there are many to be handled
in a short period of time.
Also use the system clock and async waiting on it for scheduling the timeouts.
GST_DTLS_USE_GST_LOG is not defined anywhere, so
we'd just log into the default category by accident.
We use the gst logging system unconditionally now,
so might just as well remove this #if #else.
gcc-4.9.2:
gstdtlsagent.c:114:1: error: old-style function definition
gstdtlsconnection.c:253:3: error: ISO C90 forbids mixed declarations and code
gstdtlsconnection.c:291:3: error: ISO C90 forbids mixed declarations and code
gstdtlsconnection.c:391:3: error: ISO C90 forbids mixed declarations and code
gstdtlsconnection.c:434:3: error: ISO C90 forbids mixed declarations and code
gstdtlsconnection.c:773:1: error: 'BIO_s_gst_dtls_connection' was used with no prototype before its definition
gstdtlsconnection.c:773:1: error: old-style function definition
gstdtlsconnection.c:128:32: error: passing 'const char [30]' to parameter of type 'void *'
discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
SSL_get_ex_new_index (0, "gstdtlsagent connection index", NULL, NULL,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/openssl/ssl.h:1981:43: note: passing argument to parameter 'argp' here
int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
^
gstdtlsconnection.c:822:40: error: arithmetic on a pointer to void is a GNU extension
[-Werror,-Wpointer-arith]
memcpy (out_buffer, priv->bio_buffer + priv->bio_buffer_offset, copy_size);
~~~~~~~~~~~~~~~~ ^
In some upload implementations the out buffer has more than one references,
turning the buffer not writable, so it won't be possible to modify its
meta-data.
This patch moves the meta-data copy before increasing the reference of the out
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=746173
glupload ! glcolorconvert ! sink
Some properties are manually forwarded. The rest are available using
GstChildProxy.
The two signals are forwarded as well.
It encapsulates a confiurable GL processing element in the
upload/colorconvert/download dance required to transparently process
the majority of GstBuffer's.
GLImage does not use any kind of internal pool. There was some
remaining code and comment stating that it was managing the
pool, and it was in fact setting the active state when doing
to ready state.
* Only create the pool if requested and in propose_allocation
* Cache the pool to avoid reallocation on spurious reconfigure
* Don't try to deactivate the pool (we don't own it)
https://bugzilla.gnome.org/show_bug.cgi?id=745705
If searchIdx() doesn't find the id it returns -1, which breaks
motioncelssvector.at (idx). Check for it and return if not found.
Changing a few other lines for style consistency.
The max latency parameter is "the maximum time an element
synchronizing to the clock is allowed to wait for receiving all
data for the current running time" (docs/design/part-latency.txt).
https://bugzilla.gnome.org/show_bug.cgi?id=744338
LibJPEG uses macroblock of 8x8 sample. In this element we use RGB and
Y444, two 24bit formats that are stored in 32bit pixels. This mean we
have 32x32 bytes macroblocks. For this reason, we need to allocate
our buffer slightly larger. We also need to pass the line pointer in
the right order, otherwise the image endup upside-down.
https://bugzilla.gnome.org/show_bug.cgi?id=745109
Using mkstemp without setting the permission mask is potentially harmful.
POSIX specification of mkstemp() does not say anything about file modes, so we
need to make sure its file mode creation mask is set appropriately before
calling it.
This implements support for GstAllocationParams and memory alignments.
The parameters where simply ignored which could lead to crash on
certain platform when used with libav and no luck.
https://bugzilla.gnome.org/show_bug.cgi?id=744246
+ Split headers from source
+ Remove uneeded AM_CFLAGS, AM_LDFLAGS
+ Always set OBJCFLAGS
Due to the presence of a .m and regardless of the conditional values,
automake will promote the link command to OBJC using OBJCFLAGS. Only
the basic flags (like warnings and optimization) are going to make a
difference though.
This cleanup builds up the makefile with less specific files first
toward more specific file. FLAGS are built with the basic that unused
flags will have empty variable.
i686-apple-darwin11-llvm-gcc-4.2
gstglmixer.h:43: error: redefinition of typedef ‘GstGLMixer’
gstglmixerpad.h:32: error: previous declaration of ‘GstGLMixer’ was here
gstglmixer.h:46: error: redefinition of typedef ‘GstGLMixerFrameData’
gstglmixerpad.h:33: error: previous declaration of ‘GstGLMixerFrameData’ was here
The graphene-1.0 part should not be in the source code. This directory
is part of the cflags include. This is similar to gstreamer-1.0/
directory. This break compilation if the include directory where
graphene is installed is not in your include path.
Bitrate-limit is already available in the baseclass and, even though
the bandwidth-usage name is better, hls and mss already used
bitrate-limit. This patch deprecates the bandwidth-usage and maps
it to the baseclass bitrate-limite.
Move the property from subclasses to adaptivedemux, it allows
selecing the percentage of the measured bitrate to be used when
selecting stream bitrates
Allow the playlist-length to accept '0' as a value, indicating
that no segment should be removed from the playlist. This allows
generating playlists to be used as VOD when complete.
Allows to set a bitrate directly instead of measuring it internally
based on the received chunks. The connection-speed was removed from
mssdemux and hlsdemux as it is now in the base class
By implementing get_live_seek_range.
As shown by :
gst-validate-1.0 playbin \
uri=http://dev-iplatforms.kw.bbc.co.uk/dash/news24-avc3/news24.php
This patch handles live seeking, by setting a live seek range
comprised between now - timeShiftBufferDepth and now.
The inteersting thing with this stream is that one can actually
ask fragments up to availabilityStartTime, but it seems quite clear
in the spec that content is only guaranteed to exist up to
timeShiftBufferDepth.
One can test live seeking this way :
gst-validate-1.0 playbin \
uri=http://dev-iplatforms.kw.bbc.co.uk/dash/news24-avc3/news24.php \
--set-scenario seek_back.scenario
with scenario being:
description, seek=true
seek, playback-time=position+5.0, start="position-600.0",
flags=accurate+flush
This example will play the stream, wait for five seconds, then seek back
to a position 10 minutes earlier.
https://bugzilla.gnome.org/show_bug.cgi?id=744362
Add parsed/framed=true to allow negotiation with some
muxers that required parsed input. Encoders already provide
parsed/framed output so it should say so in caps.
Some variables are not initialized in the constructor. It is highly unlikely
they are used before being set, but it is safer to initialize them.
CID #1197704
Allows finer grain decisions about formats and features at each
stage of the pipeline.
Also provide propose_allocation for glupload besed on the supported
methods.
Make GstGLMemory hold the texture target (tex_target) the texture it represents
(tex_id) is bound to. Modify gst_gl_memory_wrapped_texture and
gst_gl_download_perform_with_data to take the texture target as an argument.
This change is needed to support wrapping textures created outside libgstgl,
which might be bound to a target other than GL_TEXTURE_2D. For example on OSX
textures coming from VideoToolbox have target GL_TEXTURE_RECTANGLE.
With this change we still keep (and sometimes imply) GL_TEXTURE_2D as the
target of textures created with libgstgl.
API: modify GstGLMemory
API: modify gst_gl_memory_wrapped_texture
API: gst_gl_download_perform_with_data
Depending on the platform, it was only ever implemented to 1) set a
default surface size, 2) resize based on the video frame or 3) nothing.
Instead, provide a set_preferred_size () that elements/applications
can use to request a certain size which may be ignored for
videooverlay/other cases.
Add more power to the chunk_received function (renamed to data_received)
and also to the fragment_finish function.
The data_received function must parse/decrypt the data if necessary and
also push it using the new push_buffer function that is exposed now. The
default implementation gets data from the stream adapter (all available)
and pushes it.
The fragment_finish function must also advance the fragment. The default
implementation only advances the fragment.
This allows the subsegment handling in dashdemux to continuously download
the same file from the server instead of stopping at every subsegment
boundary and starting a new request
gstdashdemux.c:1330:13: error: implicit conversion from enumeration type 'enum _GstAdaptiveDemuxFlowReturn' to different enumeration type
'GstFlowReturn' [-Werror,-Wenum-conversion]
ret = GST_ADAPTIVE_DEMUX_FLOW_SUBSEGMENT_END;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gmyth seems to be unmaintained upstream, and no one has asked
for this to be ported for a very long time, so let's just
remove it. Neither debian nor Fedora seem to ship libgmyth
any longer, and in any case it's most likely deprecated by
the UPnP support in MythTV.
The segment start time is calculated as the offset into the current segment.
The old condition to detect the end of period (i.e. segment start time >
period start + period duration) failed when the period start was not 0 since
the segment start time does not take the period start time into account.
Fix this detection by only comparing the segment start to the period duration.
https://bugzilla.gnome.org/show_bug.cgi?id=733369
The ISOBMFF profile allows definind subsegments in a segment. At those
subsegment boundaries the client can switch from one representation to
another as they have aligned indexes.
To handle those the 'sidx' index is parsed from the stream and the
entries point to pts/offset of the samples in the stream. Knowing that
the entries are aligned in the different representation allows the client
to switch mid fragment. In this profile a single fragment is used per
representation and the subsegments are contained in this fragment.
To notify the superclass about the subsegment boundary the chunk_received
function returns a special flow return that indicates that. In this case,
the super class will check if a more suitable bitrate is available and will
change to the same subsegment in this new representation.
It also requires special handling of the position in the stream as the
fragment advancing is now done by incrementing the index of the subsegment.
It will only advance to the next fragment once all subsegments have been
downloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=741248
The old code was using gst_caps_normalize() and was generally overly
complex. Simplify by picking sample rate and number of channels from
upstream and the sample format from the allowed caps. If the format caps
is a list of strins, just pick the first one. And if the srcpad isn't
linked yet, use the default format (S16).
https://bugzilla.gnome.org/show_bug.cgi?id=740195
Optimize loop by moving condition outside of it and reuse the
find_next_fragment function to check if there is next instead of
replicating the same loop
Duration queries can be done a few times per second and would cause
the segment list to be traversed for every one. Caching the duration
prevents that.
Variable hands is already checked to contain a value previously at the beginning
of the current block (in line 504). There is no need to check again. This is
logically dead code.
CID 1197693
The duration values in playlists are approximate only, and for
playlist versions 2 and older they are only rounded integer values.
They cannot be used to timestamp buffers. This resulted in playback
gaps and skips because the actual duration of fragments is slightly
different. The solution is to only set the pts of the very first
buffer processed, not for each fragment.
q->bitrate is a guint64, but G_TYPE_INT may read fewer bits
off the stack, and if we pass more then the NULL sentinel
may not be found at the right place, which in turn might
lead to crashes.
https://bugzilla.gnome.org/show_bug.cgi?id=741751
hlsdemux assumes that seeking is not allowed for live streams,
however seek is possible if there are sufficient fragments in the
manifest. For example the BBC have live streams that contain 2 hours
of fragments.
The seek code for both live and on-demand is common code. The
difference between them is that an offset has to be calculated
for the timecode of the first fragment in the live playlist.
When hlsdemux starts to play a live stream, the possible seek range
is between 0 and A seconds. After some time has passed, the beginning of
the stream will no longer be available in the playlist and the seek
range is between B and C seconds.
Seek range:
start 0 ........... A
later B ........... C
This commit adds code to keep a note of the B and C values
and the highest sequence number it has seen. Every time it updates the
media playlist, it walks the list of fragments, seeing if there is a
fragment with sequence number > highest_seen_sequence. If so, the values
of B and C are updated. The value of B is used when timestamping
buffers.
It also makes sure the seek range is never closer than three fragments
from the end of the playlist - see 6.3.3. "Playing the Playlist file"
of the HLS draft.
https://bugzilla.gnome.org/show_bug.cgi?id=725435
For small amounts some data might be mistyped and it would cause
the pipeline to fail. For example if you have AAC inside mpegts,
for small amounts, the AAC samples would cause the typefinder to
think it is AAC and not mpegts.
https://bugzilla.gnome.org/show_bug.cgi?id=736061
If typefind fails, check to see if the buffer is too short for typefind. If this is the case,
prepend the decrypted buffer to the pending buffer and try again the next time around.
https://bugzilla.gnome.org/show_bug.cgi?id=740458
Corrected the final boundary mechanism so that a final boundary is
added to each mail with multipart content that is sent,
not just to the last one.
https://bugzilla.gnome.org/show_bug.cgi?id=741553
This reverts commit 15394aa705.
The latest release (v1.1) does not have pkg-config support
yet, so this plugin won't be built with the latest release.
Cerbero uses the latest release, so this makes cerbero
builds fail, which expect the plugin to be built.
We can re-commit this once there's a release that includes
pkg-config support.
Rework reverse fragment traversing with repetition fields to prevent
NULL pointer deref and avoid never advancing a fragment as the variable
is unsigned and would always be non-negative.
CID #1257627
CID #1257628
Read the "r" attribute from fragments to support fragments nodes
that use repetition to have a shorter Manifest xml.
Instead of doing:
<c d="100" />
<c d="100" />
You can use:
<c d="100" r="2" />
According to the HLS spec the remainder of the line following
the comma on EXTINF tag is not required. This patch removes
the fake title and saves some bytes on the playlist.
https://bugzilla.gnome.org/show_bug.cgi?id=741096
A context can create a GLsync object that can be waited on in order
to ensure that GL resources created in one context are able to be
used in another shared context without any chance of reading invalid
data.
This meta would be placed on buffers that are known to cross from
one context to another. The receiving element would then wait
on the sync object to ensure that the data to be used is complete.
This gives more flexibility to the subclasses and permits to remove the
GstVideoAggregatorClass->disable_frame_conversion ugly API.
WARNING: This breaks the API as it removes the disable_frame_conversion
field
API:
+ GstVideoAggregatorClass->find_best_format
+ GstVideoAggregatorPadClass->set_format
+ GstVideoAggregatorPadClass->prepare_frame
+ GstVideoAggregatorPadClass->clean_frame
- GstVideoAggregatorClass->disable_frame_conversion
https://bugzilla.gnome.org/show_bug.cgi?id=740768
If we seek when media is in stop state, playback-test gives
critical error, since context of glimagesink is destroyed during stop.
But since context is not present, we need not handle send_event in glimagesink
Hence adding a condition to check if context is valid.
https://bugzilla.gnome.org/show_bug.cgi?id=740305
Otherwise e.g. videotestsrc ! openh264enc ! ... will drop every second frame
because otherwise the target bitrate can't be reached without loosing too
much quality.
gst_glimage_sink_handle_events can be called from the overlay interface and from
the main thread before GL is setup. Before this change, that would call
_ensure_gl_setup() and deadlock on OSX.
Change things so that it's always safe to call gst_glimage_sink_handle_events()
without stuff deadlocking.
Remove gst_glimage_sink_handle_events call in gst_glimage_sink_init. It was
unnecessary and when the element was instantiated from the main thread, caused a
deadlock in OSX creating the context (thread).
Both Firefox and Chrome uses OPUS as the encoding in their SDP.
Adding this now defacto standard name remove the need for special
case in SDP parsing code.
https://bugzilla.gnome.org/show_bug.cgi?id=737810
with force-aspect-ratio=true, if the width or height changed, the
viewport wasn't being updated to respect the new video width and height
until a resize occured.
Otherwise, it is only possible for the sink pads and the src pads to
have the exact same caps features. We can convert from any feature
to another feature so support that.
Otherwise, it is only possible for the sink pads and the src pads to
have the exact same caps features. We can convert from any feature
to another feature so support that.
