Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_async_enabled),
(gst_base_sink_set_ts_offset), (gst_base_sink_perform_qos):
Add some debug.
Make sure we don't generate invalid QoS messages.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position):
The reported position must always be smaller than the last seen
timestamps (or timestamp + duration for reverse).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position_last), (gst_base_sink_get_position):
Fix position query range checks in reverse playback.
Original commit message from CVS:
Based on patch by: Bjarne Rosengren <bjarne at axis dot com>
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Make sending an EOS event to the basesrc non-blocking even if the
implementation does blocking waits in the create function. This is done
by unlocking the create function when EOS is sent.
Fixes#535218.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
If nothing else can be used, use the last buffer's start time as
the segment's last stop. Fixes bug #534258.
Original commit message from CVS:
Patch by: Tim-Philipp Müller <tim.muller at collabora co uk>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Unref events that the GstBaseTransform::event vfunc didn't want to
have forwarded by the base class. Closes a leak in identity.
Fixes bug #446763.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Expose a method that was previously used internally to synchronize
against the clock because it can be useful for subclasses too.
GstBaseSink::gst_base_sink_wait_clock()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_adjust_time),
(gst_base_sink_wait_clock), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked):
Refactor adjusting the running_time with latency and offset into a
separate method.
When doing clipping, we still want to use the subclass get_times method,
just in case the DURATION or TIMESTAMP are not set.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_start):
Use right error code when typefinding fails, so we can use
the default (translated) error messages.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_start):
When the subclass did not set caps on outgoing buffers, configure the
caps we negotiated on the source pad.
When the typefind helper does not find caps, error out properly instead
of doing things with NULL caps.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
Sort buffer cache list by end offsets. This makes sure that we don't
stop to search for a cached buffer that contains the requested data
too early.
Also read a minimum of 4k bytes instead of 512 bytes as this is a bit
more efficient. Fixes bug #459862.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check the caps of the buffer returned by gst_pad_alloc_buffer() and
fall back to default negotiation in the chain function if the caps
are different from what was requested. Fixes bug #526768.
Original commit message from CVS:
Based on a patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't passthrough buffer allocation too easily if the caps change.
This breaks when working in passthrough mode and upstream changes
it's caps. Fixes bug #526768.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_send_event):
Rearrange the latency query code. We always want to do the upstream
query, even if we are not live so that the upstream elements can get the
latency results too. If we fail doing the query and we are live, we
return TRUE afterwards.
Original commit message from CVS:
* gst/gstutils.c:
* gst/gstutils.h:
API: Deprecate gst_atomic_int_set(), g_atomic_int_set() should be used
now that we depend on new enough GLib.
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_set_colored),
(gst_debug_set_default_threshold), (_gst_debug_category_new),
(gst_debug_category_set_threshold):
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_set_qos_enabled):
* libs/gst/net/gstnettimeprovider.c:
(gst_net_time_provider_set_property):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* docs/design/part-buffering.txt:
Fix some typos and set the estimated total for push mode to -1.
* gst/gstquery.c: (gst_query_new_buffering):
Set buffering-left to 0 as we're not buffering by default.
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
Implement BUFFERING query.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
Also unset the GAP flag on buffers if we're working inplace but
the element is not GAP-aware.
Mark a comment as FIXME 0.11.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/gstclock.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.c:
* libs/gst/check/gstcheck.c:
Small documentation fixes. Fixes#523978.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop),
(gst_base_sink_get_position_paused):
Add fixme regarding EOS in pull mode.
Fix position reporting in PAUSED for negative rates.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop):
The start segment for reverse playback goes from start to last_stop.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_size):
Print element name with g_warning() if there's a problem
with the unit size.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_do_seek),
(gst_base_src_loop):
Don't update the last_stop position in do_seek, that's the position we
did a seek to.
Read backwards when we have a negative rate.
* tests/check/elements/filesrc.c: (event_func), (wait_eos),
(setup_filesrc), (cleanup_filesrc), (GST_START_TEST),
(filesrc_suite):
Add check for reverse reading.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Allow sending EOS to the source to make it send out an EOS event from
the streaming thread.
Update docs and deprecate the old NULL/READY shutdown method.
* tests/check/libs/basesrc.c: (GST_START_TEST),
(gst_basesrc_suite):
Add unit test for controlled shutdown.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_perform_seek), (gst_base_src_get_range),
(gst_base_src_set_playing), (gst_base_src_change_state):
Make _wait_playing() not check any variables so that we can call this
function from subclasses. Move the checks elsewhere similar to
_wait_preroll() in basesink.
Add some debugging.
Only signal the LIVE cond when we are going back to PLAYING.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_set_gap_aware):
* libs/gst/base/gstbasetransform.h:
API: Add gst_base_transform_set_gap_aware() to control whether
the element correctly handles GST_BUFFER_FLAG_GAP or shouldn't
get buffers with this flag at all. Fixes#503231.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.h:
* gst/gstdebugutils.c:
* gst/gstinfo.c:
* gst/gstutils.c:
* gst/gstutils.h:
* libs/gst/base/gstbasesink.c:
* tools/gst-launch.c:
Change GST_GET_TIMESTAMP into gst_util_get_timestamp and replace all
uses as we don't have HAVE_POSIX_TIMERS in public headers.
Thanks Tim for spotting.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_last_buffer):
Don't hold the object lock when unreffing a buffer because it could
cause a deadlock when the finalize function wants to grab the object
lock too. Fixes#495133.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes#494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query),
(gst_base_src_perform_seek), (gst_base_src_default_event),
(gst_base_src_set_flushing), (gst_base_src_activate_push),
(gst_base_src_activate_pull):
Unify flushing code, remove some old unlock code that is no longer used.
Take the streaming lock when seeking to avoid races. Fixes#492729.
Added some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_preroll_object),
(gst_base_sink_event), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_change_state):
Don't try to report a 0 position when we don't know, return -1 and FALSE
instead. This mostly happens when we are prerolling.
Make sure we can report the right position before we post the ASYNC_DONE
message so that a message handler can query position without races.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(async_done_handoff), (async_done_func), (send_buffer),
(async_done_eos_func), (gst_sinks_suite):
Add two tests for the above.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_last_buffer), (gst_base_sink_set_last_buffer),
(gst_base_sink_get_property), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add a new last-buffer property that contains the last buffer used in
basesink for preroll or rendering. useful for making snapshots.
API: gst_base_sink_get_last_buffer()
API: GstBaseSink::last-buffer
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
Reset last seen position after flushing so that we don't report the old
position anymore.
Original commit message from CVS:
Patch inspired by: Benoit Fouet <benoit dot fouet at purplelabs dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_eos),
(gst_base_sink_event):
* libs/gst/base/gstbasesink.h:
Add function to wait for EOS, subclasses can use this to correctly wait
for devices to drain before performing the EOS logic. Fixes#485343.
API: gst_base_sink_wait_eos()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_needs_preroll), (gst_base_sink_chain_unlocked):
When we received EOS and are waiting for when to post the EOS message,
our state is prerolled and we should not return ASYNC.
Reorganize some code paths to implement this behavior.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(gst_sinks_suite):
Add unit test to verify above EOS fix.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event),
(gst_base_sink_get_position):
Don't try to preroll non-async elements after a flush.
Subtract latency form clock times when reporting position.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_query_latency), (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_get_range),
(gst_base_src_pad_get_range), (gst_base_src_loop),
(gst_base_src_unlock), (gst_base_src_unlock_stop),
(gst_base_src_set_flushing), (gst_base_src_set_playing),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Rework the locking of basesrc in a similar fashion to basesink. We
basically have one lock (LIVE_LOCK) protecting the dataflow. This allows
us to handle live sources and semi live ones much better.
Simplify flushing.
Fix unlocking when seeking, shutting down and pausing in live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_do_sync),
(gst_base_src_get_range), (gst_base_src_change_state):
Call unlock for live sources so that they can't get stuck in _create and
produce a buffer before they are set back to PLAYING.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
Also initialize the counter that calculates the first timestamp on a
buffer correctly for non-live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_event), (gst_base_sink_query),
(gst_base_sink_change_state):
Simplify latency query.
When not synchronizing, we can report latency without querying the peer
element.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_event), (gst_base_sink_change_state):
Sinks that don't preroll can always be queried for the latency.
Don't post ASYNC start when we are not async.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_set_flushing), (gst_base_sink_query),
(gst_base_sink_change_state):
Latency query is allowed after we are prerolled. Introduce a new flag
for this and stop abusing other variables.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event):
Push OOB events downstream when we get them in send_event. This allows
the application to insert events in the pipeline.
Add some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_do_sync), (gst_base_src_change_state):
Update docs.
Clean up the timestamping and syncing code for pseudo live sources.
Original commit message from CVS:
* docs/design/part-live-source.txt:
Add docs on how live sources should timestamp.
* libs/gst/base/gstbasesrc.c: (gst_base_src_do_sync):
Add some more debug info.
For subclasses that are live and like to sync, add aditional startup
latency to sync time and timestamps so that we timstamp according to the
design doc.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_set_do_timestamp),
(gst_base_src_get_do_timestamp), (gst_base_src_set_property),
(gst_base_src_get_property), (gst_base_src_do_sync):
* libs/gst/base/gstbasesrc.h:
Add property to make the basesrc timestamp buffers based on the current
running time.
API: GstBaseSrc::do-timestamp
API: gst_base_src_set_do_timestamp()
API: gst_base_src_get_do_timestamp()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_query):
Protect eos and have_preroll with the OBJECT lock so we don't need to
take the PREROLL lock when querying the latency. Fixes#473846.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_set_async_enabled),
(gst_base_sink_is_async_enabled), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add async property to instruct the sink never to inform the parent about
ASYNC state changes, update docs.
Check argument with g_return_* for the public functions.
API: GstBaseSink::async property
API: gst_base_sink_set_async_enabled()
API: gst_base_sink_is_async_enabled()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop):
Improve debugging.
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_change_state):
Rearrange some code so that we can add support for measuring the
startup latency.
Original commit message from CVS:
* gst/gstmessage.h:
Add some more docs for the messages.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query):
Add some more debugging.
* tools/gst-launch.c: (event_loop):
When interrupting, don't try to set pipeline to PAUSED twice.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
Don't send an async_start message during downwards state change if target
state is less than READY
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Work around the brokenness of the event vmethod in basetransform. Prefer
to return TRUE when the subclass returned FALSE (meaning don't forward
the event).
* libs/gst/base/gstbasetransform.h:
Clarify the docs.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_chain):
Properly set the last_stop position on GstSegment. This will only happen
if there is a buffer to push out.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
always_in_place does not mean that the sink and source caps are the
same! Make sure we don't blindly proxy the buffer_alloc in this case.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range):
* libs/gst/base/gstbasesrc.h:
API: gst_base_src_query_latency(). Added method so that subclasses can
easily get the latency values of the base source class.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_take_buffer):
Make take_buffer a bit quicker by removing redundant checks
caused by calling gst_adapter_take.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_loop):
Only push the segment events in the PLAYING state for live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range):
Handle errors from the clock sync better, only UNSCHEDULED indicates a
WRONG_STATE and can silently pause the task. All other cases should
error out.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_activate_push):
Change some GST_ERROR_OBJECT that aren't really errors to
GST_WARNING_OBJECT in order to reduce terminal spam.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin dot wh9 dot net>
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
Store new length in segment duration so we don't keep on calling the
potentially expensize get_size() call. Fixes#370865.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_flush),
(gst_adapter_take_buffer):
Fix format string to use all its arguments.
Remove useless >= check on a guint
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* gst/gstevent.h:
Add small comment.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
Debug segment values *after* updating them as this is more
interesting.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* docs/random/moving-plugins:
Make it clear that the "compiled-in descriptions" really mean
the element details.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll):
Update docs.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_get_range), (gst_base_src_activate_push):
* libs/gst/base/gstbasesrc.h:
Added function to block while waiting for PLAYING, this function
is used by live sources that block on the clock.
API: gst_base_src_wait_playing()
Original commit message from CVS:
Based on patch by: Antoine Tremblay <hexa00 at gmail dot com>
* libs/gst/base/gstbasesrc.c:
(gst_base_src_default_check_get_range), (gst_base_src_start),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Match _start/_stop calls in the activate functions. Remove redundant
_stop call from the state change function. Fixes#356910.
Turn failure DEBUG into ERROR.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_post_message),
(gst_element_dispose):
Use _DEBUG_OBJECT some more.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Avoid typechecks.
* tools/gst-launch.c: (main):
If the toplevel element is not a GstPipeline, it must be put in a
pipeline so that a bus and clock is selected.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
JITTER, RATE, and LATENCY query should be handled by the
default case and not by the CONVERT query code.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check if requested caps are the same as the sinks caps IF
->have_same_caps is TRUE. If they are not, act as if have_same_caps
is FALSE.
This fixes the renegotiation issues stated in #352827.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_do_sync),
(gst_base_sink_preroll_object):
Make sure that our internal state is correct when we commit our state
asynchronously. This solves a race where a state change to PLAYING
could cause the sink to remain blocked in preroll in some situations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_preroll),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Expose logic to wait for preroll so that subclasses such as audiosink
can also use this method.
API: gst_base_sink_wait_preroll()
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/plugins/gstreamer-plugins-sections.txt:
Fix docs some more.
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
* libs/gst/base/gstcollectpads.h:
Documentation updates.
Free queued buffer when removing a pad.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Inform GstSegment of the last stop position in order for the current
segment to have a proper duration if it doesn't have a specific stop
position from which a duration could be calculated.
This bug was noticeable when a non-flushing, non-update new segment was
followed by another segment (all buffers from the new segment were being
dropped).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Small comment update.
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_transform_ip):
Drop-probability is broken, mention this in the code with a
FIXME and also in the property description.
Make silent also be silent about the drop messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstcaps.c: (gst_structure_is_equal_foreach),
(gst_caps_merge):
* gst/gstcaps.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
API: Add gst_caps_merge() and use it in basetransform, fixes#345444
in a better way
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Only call downstream buffer_alloc if transform element is passthrough
or always_in_place. Closes#350449.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
If the parent state change function failed, don't assume we can safely
stop the source, this will be done when the pads are deactivated.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Even if we can't figure out the proper format to request downstream,
call buffer_alloc() downstream with the input parameters without setting
the caps on the srcpad. This will force negotiation in the chain
function.
Closes#350449
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Use OBJECT_LOCK and refcounting to get the pad caps in the
buffer_alloc function because the caps could change while we are
busy with them. Fixes#349105
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked), (gst_collect_pads_pop),
(gst_collect_pads_clear), (gst_collect_pads_flush),
(gst_collect_pads_event), (gst_collect_pads_chain):
When flushing a pad, also clear the queued buffer so that we don't
accidentally use it when we shouldn't.
Fix leaks by inreffing incomming buffer.
Flush out queued buffers in case of errors.
Fixes#347452.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Forgot to remove two unneeded unrefs.
Simplify a check _is_equal allready checks the obvious case.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_replace):
Fix crasher when passed NULL. Doc clarification.
Optimize for the trivial case.
* gst/gstpipeline.c: (gst_pipeline_change_state):
Small cleanups.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Small documentation cleanup.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't use silly gst_pad_get_negotiated_caps, GST_PAD_CAPS
is what we need and it avoids a whole lot of redundant
refcount operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_chain):
Handle the case where a pad is removed from the collection
that could cause the other pads to become collectable.
Original commit message from CVS:
* gst/gstelement.c:
Clarify the use of _release_request_pad() and
_get_request_pad() a bit better.
* libs/gst/base/gstadapter.c: (gst_adapter_peek),
(gst_adapter_take_buffer):
Fix some doc and comment typos.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_check_pads):
When rebuilding the pad list, don't leak the previous list.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_get_query_types), (gst_base_src_update_length):
Publish supported query types.
Update last_stop field in get_range mode so the position
query works. Fixes#342321.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
API: gst_collect_pads_set_flushing
Added api to set the pads to flushing, usefull for seeking
code in elements using collectpads.
Clear segment when receiving a flush.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
clear/reset segment info in FLUSH_STOP.
Fixes#336929.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop),
(gst_collect_pads_check_collected):
Flush queued buffer on _stop(), fixes playing again (#342454)
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't report POSITION based on clock time if sync is
disabled in a sink.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
No need to call _stop in _finalize.
Iterate the main pad list in _finalize.
Added some more debug.
Free lists and data in the right order.
Also free data whem doing _remove_pad when stopped for
backward compatibility protect ::started with PAD_LOCK as
well.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_collect),
(gst_collect_pads_collect_range), (gst_collect_pads_available),
(gst_collect_pads_check_pads), (gst_collect_pads_check_collected),
(gst_collect_pads_event), (gst_collect_pads_chain):
Update docs.
Better debug info.
Catch and return errors from the collect function
Refuse data on eos pads.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Always push non-flushing serialized events in the streaming
thread.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment):
Add applied_rate to the debug
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Copy applied_rate into the outgoing NEWSEGMENT event
Original commit message from CVS:
Patch by: Philippe Rouquier <philippero at libertysurf dot fr>
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
call ::unlock before taking the PREROLL_LOCK so we can safely
handle elements that lock in ::render.
Fixes#340174.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Unify error handling, don't post an error message
when a push() returns EOS but perform our normal EOS
handling code. Fixes#340772.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Store the sync time of the buffer end position separatly in a
new variable eos_rtime so we can properly sync the EOS event.
Fixes#340697.
Fix the docs for gst_base_sink_set_qos_enabled().
Don't set segment start to invalid value when we receive a
non TIME newsegment.
get closer to handling position reporting for negative rates
correctly.
Original commit message from CVS:
Patch by: James Andrewartha <trs80 at tartarus uwa edu au>
* gst/gst.c:
* gst/gstbus.c:
* gst/gstclock.c:
* gst/gstevent.c:
* gst/gstformat.c:
* gst/gstmessage.c:
* gst/gstparse.c:
* gst/gstquery.c:
* gst/gstutils.c:
* gst/parse/Makefile.am:
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstpushsrc.c:
* libs/gst/base/gsttypefindhelper.c:
* plugins/elements/gstfakesrc.c:
* plugins/elements/gstidentity.c:
Make sure gstprivate.h and/or config.h are
always included first, otherwise some of our
defines (like _FILE_OFFSET_BITS) might be
redefined in the system headers. Fixes build
on opensolaris (#340016).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
make sure GstBaseTransformClass shows up in the docs
* libs/gst/base/gstbasetransform.c:
* libs/gst/base/gstbasetransform.h:
move docs so gtk-doc picks it up now
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
back out the newsegment handling change, see #340060 for ongoing
discussion
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
fix changelog entry about last collectpads change,
add notes about proper fix
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_is_collected), (gst_collect_pads_event):
more detailed debug and formatting cleanup
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_is_too_late),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position), (gst_base_sink_change_state):
When frame dropping is enabled, we should not ignore frames
without a duration.
Update some documentation.
Original commit message from CVS:
* gst/gstsegment.c:
Added some more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_perform_qos),
(gst_base_sink_reset_qos):
Calculate more accurate rate values.
Original commit message from CVS:
* gst/gst_private.h:
add a new #ifdef to use __declspec(dllimport) only for
other modules and not for gstreamer core
* gst/gstbasesink.c: (gst_base_sink_perform_qos):
use gst_guint64_to_gdouble for conversion
* win32/common/libgstreamer.def:
add new exported functions
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcontroller.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstdataprotocol.dsp:
* win32/vs6/libgstnet.dsp:
update project files
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Be a bit nicer to badly behaving upstream elements that expect
us to deal with non TIME segments and timestamps (such as fakesrc
in the testsuite).
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
Original commit message from CVS:
2006-04-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_blocked_async): More debug.
* libs/gst/base/gstbasetransform.c
(gst_base_transform_sink_eventfunc): When resetting our segment on
FLUSH_STOP, also update the flag saying we haven't seen a
newsegment.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* gst/gsttaglist.c:
* libs/gst/base/gstbasesink.c:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstbasesrc.h:
Documentation updates. Make BaseSink and BaseSrc docs contain the
class structure so that people can actually see the prototypes for
virtual functions they're supposed to be overriding.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_do_sync),
(gst_base_sink_record_qos_observation),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_is_too_late), (gst_base_sink_render_object),
(gst_base_sink_change_state):
More QoS measurements as described in the design doc.
Get rid of ringbuffer with observations, running average is
more simple and equally good.
Calculates valid proportion now.
Added beginning of flood measurement.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_finalize),
(gst_base_src_send_event), (gst_base_src_loop),
(gst_base_src_change_state):
Perform the EOS logic when we reach the segment stop position.
Fix compilation on gcc4.1
Original commit message from CVS:
Inspired by a patch of: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_finalize),
(gst_base_src_send_event), (gst_base_src_change_state):
Handle element seek correctly when we are streaming.
Fixes#326998.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_finalize),
(gst_base_sink_set_qos_enabled), (gst_base_sink_is_qos_enabled),
(gst_base_sink_set_property), (gst_base_sink_get_property),
(gst_base_sink_commit_state), (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_add_qos_observation), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_is_too_late), (gst_base_sink_render_object),
(gst_base_sink_preroll_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
Decouple max-lateness and the fact that QoS messages are generated
with a new property (qos).
Add vmethod so subclasses can be notified of ASYNC playing
state changes.
Collect timestamp start and stop to report better current
position in EOS/PLAYING/PAUSED/READY/NULL.
Refactor QoS/frame dropping and other measurements.
API: GstBaseSrc::qos
* libs/gst/base/gstbasesink.h:
Added Private struct.
API: gst_base_sink_set_qos_enabled
API: gst_base_sink_is_qos_enabled
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_do_qos):
Better debug info when we receive a segment event.
Reorganize a bit so we can pass the get_times() results around.
Use the segment format when calculating the running time.
Don't do QoS is sync is disabled or we have no clock or the
element does not want us to sync to the clock.
Don't drop buffers if QoS is disabled for now.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Can't use gst_segment_to_running_time() when the segment
is not in GST_TIME_FORMAT (like with filesink, for example).
Stops flac encoding pipelines from spewing critical warnings
at EOS (#331248).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync),
(gst_base_sink_do_qos):
Separate QoS calculation.
Only drop buffers when lateness is bigger than the
duration of the buffer.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_do_sync):
Small cleanups.
Use QOS debug category.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_get_length),
(gst_type_find_helper_get_range):
If we are provided with the size, we should implement
GstTypeFind::get_length, so that typefind functions who
want to can actually peek at the middle of a file.
Original commit message from CVS:
* docs/design/part-element-transform.txt:
Added some docs about the design of tranform elements.
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Mark buffers with the DISCONT flag.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Added basesink new methods.
* gst/gstevent.c:
* gst/gstevent.h:
Docs updates. Flesh out the QoS docs.
* libs/gst/base/gstadapter.c:
Small doc clarification about ownership and flushing.
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Added new methods to allow subclass to control max-lateness
and sync.
Generate very basic QoS events based on last sync observation.
Updated docs, fix typo, added some QoS blurb.
* libs/gst/base/gstbasesrc.c:
Remove obsolete _get_state() calls from docs.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
Fix#333669, Add pad accessor defines for GstBaseTransform
Fix docs for GstBaseSrc.
Original commit message from CVS:
* libs/gst/base/gstpushsrc.c: (gst_push_src_class_init),
(gst_push_src_check_get_range):
Push sources don't support pull mode by default.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_pad_check_get_range),
(gst_base_src_default_check_get_range):
* libs/gst/base/gstbasesrc.h:
Add ::check_get_range() vfunc to GstBaseSrc (#332611),
provide default implementation, and rename
gst_base_src_check_get_range() to
gst_base_src_pad_check_get_range() for clarity.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Make max-lateness a property.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object):
Don't ever draw a frame that is >10ms late.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Make sure caps are writable before passing them to
gst_caps_append().
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (type_find_factory_rank_cmp),
(gst_type_find_helper):
Try typefinding factories with the highest rank first.
Original commit message from CVS:
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gsttypefindhelper.c:
Add section for typefind helper and add documentation
for the old and the new function.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_loop),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
* libs/gst/base/gstbasesrc.h:
Don't unconditionally send EOS when going from PAUSED to
READY state, esp. make sure we don't send two EOS events
in some cases (e.g. one when reaching EOS and one when
going from PAUSED to READY). Also, we don't want to send
EOS events when operating in pull mode. However, we do
want to send an EOS event when shutting down a live
source explicitly, for example (fixes#330996).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Fix a stupid bug. I was
sure i compiled that.
------------------------------------------------------
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Make basetransform reusable.
(Closes#331898)
------------------------------------------------------
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstcollectpads.c (gst_collect_pads_chain): Only
update last_stop if we're in TIME format and the timestamp is
valid.
* libs/gst/base/gstcollectpads.c (gst_collect_pads_event)
* libs/gst/base/gstbasetransform.c (gst_base_transform_eventfunc):
* libs/gst/base/gstbasesink.c (gst_base_sink_configure_segment):
If we get a new newsegment with a different format, adapt
accordingly.
* gst/gstclock.c (gst_clock_set_calibration): Accept a numerator
of 0. Not a problem, really.
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_chain_unlocked): Only
warn if sync=true.
Original commit message from CVS:
2006-02-05 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_event): Collectpads now holds a reference
to the GstPad that was added. Indeed we don't want to look
at pads that might just go away with no warning...
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync),
(gst_base_sink_render_object),
(gst_base_sink_queue_object_unlocked):
Only keep track of prerollable items when we are
prerolling.
Before rendering after preroll, always check if we
have queued items.
Added some more debugging.
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_empty), (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event),
(gst_base_sink_is_prerolled), (gst_base_sink_wait),
(gst_base_sink_do_sync), (gst_base_sink_handle_event),
(gst_base_sink_handle_buffer), (gst_base_sink_set_flushing),
(gst_base_sink_deactivate), (gst_base_sink_activate),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
Basesink cleanups, remove some old code.
Handle the case where a subclass can preroll in the render
method (mostly audiosinks).
Handle more events.
Remove some locks around variables that are now protected
with the PREROLL_LOCK (clock_id, flushing, ..).
Optimize position query some more, do correct locking.
Remove old code to push queue in state change, this is not
needed anymore since preroll blocks on all prerollable items
now.
Almost implemented as described in design doc.
Original commit message from CVS:
2006-01-25 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
We only query position using the clock in the playing state.
Query peer in the other cases.
* win32/common/config.h: Updates.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_unlocked):
A clock entry that is scheduled for the exact time of the
clock is still in time.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync):
Add some more debug info.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_is_collected):
Don't loop infinitely if there are no buffers to present. Partially
fixes#327197, but collectpads is just broken for reusing elements
to do multiple encodes atm.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
* gst/gstclock.c: (gst_clock_id_wait):
Added some more debug info.
* libs/gst/base/gstadapter.c:
Added more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_chain):
Added some comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync):
Some cleanups.
When the sink finishes blocking on the preroll buffer, it can
immediatly render it instead of rendering when the next buffer
arrives.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync),
(gst_base_sink_chain):
Small cleanups.
GST_ELEMENT_CLOCK and sync are protected with LOCK.
Don't store _last_stop if the buffer is dropped.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_pop):
Need to awaken ALL the pads when we pop a buffer, otherwise
collectpads only works when there is 2 input streams.
Original commit message from CVS:
2005-12-14 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_remove_pad), (gst_collect_pads_is_collected),
(gst_collect_pads_event), (gst_collect_pads_chain): Refactoring
of collectpads. This version removes a lot of races without
touching API/ABI. Yay !
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Added new symbol to docs.
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_set_format),
(gst_base_src_default_query), (gst_base_src_query),
(gst_base_src_default_do_seek), (gst_base_src_do_seek),
(gst_base_src_perform_seek), (gst_base_src_send_event),
(gst_base_src_default_event), (gst_base_src_event_handler),
(gst_base_src_set_property), (gst_base_src_get_property),
(gst_base_src_wait), (gst_base_src_do_sync),
(gst_base_src_update_length), (gst_base_src_get_range),
(gst_base_src_check_get_range), (gst_base_src_loop),
(gst_base_src_default_negotiate), (gst_base_src_start),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
* libs/gst/base/gstbasesrc.h:
Implement seeking to other formats than _BYTES.
Implement more seeking methods correctly.
Doc updates.
Added query vmethod.
Added do_seek vmethod to make life easier for subclasses
when seeking.
API addition: gst_base_src_set_format()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Take current playback rate into account when reporting
the position.
Original commit message from CVS:
* gst/gstbuffer.c:
Small docs update.
* gst/gstcaps.c: (gst_caps_is_equal):
Don't assert on NULL <--> X. Fixes#323260
* gst/gstminiobject.c: (gst_mini_object_replace):
If we're doing atomic operations, we might just as well use
the proper way to get an atomic pointer.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Clean up debugging.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init):
Change debug category to 'collectpads' from 'collect_pads'
(fixes#323250).
Original commit message from CVS:
2005-11-29 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesink.h: en-LARGE the padding.
* gst/gstconfig.h.in (GST_PADDING_LARGE): New define, the number
of pointers by which to pad very extensible base classes (like the
ones in libs/gst/base).
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_change_state):
Properly handle non GST_FORMAT_TIME segment
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Properly handle non GST_FORMAT_TIME segment
* gst/gstsegment.c:
This function is valid if the accumulator is 0 and the format
is different from the requested format.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_buffer_alloc):
Treat a pad alloc with new caps the same as if we were not
negotiated, in order to allow a changing upstream output
to produce a new format of data.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/base/Makefile.am:
* gst/check/Makefile.am:
* gst/elements/Makefile.am:
* gst/net/Makefile.am:
update LDFLAGS use some more
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_query):
Fix wrong percentage query.
* gst/gstutils.c: (gst_util_uint64_scale),
(gst_util_uint64_scale_int):
Add some more common cases that can be handled
efficiently to _scale.
Original commit message from CVS:
2005-11-24 Michael Smith <msmith@fluendo.com>
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Unlock the PREROLL_LOCK in a failure case.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
make two symbols from gstinfo private for the docs
* gst/base/gstcollectpads.h:
* gst/gstutils.c:
fix doc typos, update docs
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_wait), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
No need to store the clock, the parent element class already
has it.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_add_func):
Updates for clock_set returning a gboolean
* gst/gstclock.c: (gst_clock_entry_new), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_class_init),
(gst_clock_init), (gst_clock_finalize),
(gst_clock_get_internal_time), (gst_clock_get_time),
(gst_clock_slave_callback), (gst_clock_set_master),
(gst_clock_get_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property),
(gst_clock_get_property):
* gst/gstclock.h:
Implement master/slave. When setting a clock as a slave, a
periodic timeout is scheduled to sample master and slave times.
Then the slave clock is recalibrated to match offset and rate
of the master clock.
Update logging a bit.
Add flag so that a clock can state that is cannot be slaved to
another clock.
* gst/gstelement.c: (gst_element_set_clock):
* gst/gstelement.h:
The set_clock returns a gboolean for when an element cannot
deal with the selected clock in the pipeline.
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_set_clock):
* gst/gstpipeline.h:
Handle the case where the selected clock cannot be set on
the pipeline.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_class_init),
(gst_net_client_clock_init), (gst_net_client_clock_finalize),
(gst_net_client_clock_set_property),
(gst_net_client_clock_get_property),
(gst_net_client_clock_observe_times):
* gst/net/gstnetclientclock.h:
Use regression code in GstClock parent, remove duplicated
functionality.
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Make sure the GstFlowReturn is returned.
* gst/gstbus.c: (gst_bus_add_signal_watch_full),
(gst_bus_add_signal_watch):
* gst/gstbus.h:
add gst_bus_add_signal_watch_full.
* gst/gstplugin.c: (gst_plugin_load_file):
Small style cleanup.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (GST_LIVE_BROADCAST, GST_LIVE_SIGNAL)
(GST_LIVE_TIMED_WAIT, GST_LIVE_WAIT, GST_LIVE_GET_COND)
(GST_LIVE_UNLOCK, GST_LIVE_TRYLOCK, GST_LIVE_LOCK)
(GST_LIVE_GET_LOCK): Moved here from gstbasesrc.h. They are
private to the basesrc implementation.
Original commit message from CVS:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add a deserialisation test for fractions
* examples/metadata/read-metadata.c: (message_loop),
(make_pipeline), (main):
Fix up metadata reading sample.
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Debug format fix
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't try and fixate empty caps
* gst/gst_private.h:
Wrap in G_BEGIN_DECLS/G_END_DECLS
* gst/gstvalue.c: (gst_value_collect_fraction),
(gst_value_set_fraction), (gst_value_get_fraction_denominator),
(gst_value_transform_string_fraction),
(gst_value_compare_fraction):
Add some extra guards to ensure that we don't end up
with an invalid denominator of 0 in a gstfraction and
that fractions always get reduced.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position):
For the current position in stream time, we need to subtract
accumulated time.
* gst/gstsystemclock.c: (gst_system_clock_async_thread):
Release lock before calling the callback function of async
entries.
Original commit message from CVS:
2005-11-17 Andy Wingo <wingo@pobox.com>
* gst/gstclock.h (GstClock): Add rate and offset properties,
preserving ABI stability. Add rate/offset accessors. Will file bug
for the freeze break.
* gst/gstclock.c (gst_clock_adjust_unlocked): Implement using rate
and offset, trying to keep precision and avoiding
underflow/overflow.
(gst_clock_set_rate_offset, gst_clock_get_rate_offset): New
functions. Make gst_clock_set_time_adjust obsolete.
(gst_clock_set_time_adjust): Note that this function is obsolete.
Will file bug soon.
* gst/base/gstbasetransform.h: Make the ABI-stability hack
greppable by using GST_PADDING-1+1.
Original commit message from CVS:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event):
Check if the caps are NULL, this can happen if the element
is shutting down and the pad caps are set to NULL.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init):
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Free pad templates, fixes a couple of leaks.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
0 segment values are 0 in any format.
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/base/gstbasetransform.h:
Parse newsegment correctly in basetransform
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Sync to clock using updated segment values.
Original commit message from CVS:
2005-11-14 Julien MOUTTE <julien@moutte.net>
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
Ref the source pad caps while we need them.
Fixes (#321386)
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Added some docs for GstCollectData.
* gst/base/gstadapter.c:
Some small code example fix.
* gst/base/gstcollectpads.c:
* gst/base/gstcollectpads.h:
Document some more.
Original commit message from CVS:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_handle_buffer):
Small cleanups.
If we're processing a buffer and need to allocate an output
buffer, we cannot accept a format change. If we did get a
format change, we have to alloc a buffer ourselves of the
right size.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Don't sync on buffers that fall partially outside our current
segment. Prevents an assertion failure/abort playing some files.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps):
* gst/gstcaps.c: (gst_caps_intersect):
Don't call gst_caps_do_simplify - it doesn't respect order of caps
and it's not needed.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
* gst/base/gstbasesrc.c: (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_get_range):
Implement clock sync in base class.
Original commit message from CVS:
2005-11-09 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesink.c: Add the beginning of docs here -- have
to work on something else now tho...
Original commit message from CVS:
2005-11-09 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfilesink.c (gst_file_sink_start)
(gst_file_sink_stop): New functions, replace the state change
handler.
(gst_file_sink_class_init): Hook up the start and stop functions.
(gst_file_sink_base_init): Don't set the state change handler any
more. It was a bit ugly too, being set from here...
(gst_file_sink_get_property, gst_file_sink_set_property):
Cleanups...
(gst_file_sink_set_location): More robust check that doesn't call
GST_STATE. Ugggggg.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_event):
Hold STREAM_LOCK while pushing newsegment or tag events as well.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init),
(gst_base_src_get_range):
Set the segment_end to -1 initially. Fixed typefind.
Original commit message from CVS:
* gst/base/gstadapter.c:
Debug category should be 'adapter', not 'GstAdapter'.
* gst/base/gstcollectpads.c: (gst_collectpads_base_init),
(gst_collectpads_class_init), (gst_collectpads_init),
(gst_collectpads_peek), (gst_collectpads_pop),
(gst_collectpads_event), (gst_collectpads_chain):
Add debug category and some debugging output. Use boilerplate
macros. Remove some extraneous words from docs.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_get_range):
Check if we are doing a segment seek and have arrived at the
end of that segment.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST):
Uncomment fixed check.
* docs/design/part-TODO.txt:
Updated TODO.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
If we are going to PLAYING, post the right pending state
when we post the intermediate paused message.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state):
Don't post state changes that were between the same state
and were not ASYNC.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
Added some more checks. Specifically the case where NO_PREROLL
elements are in the pipeline.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
Post READY->PAUSED state change messages too.
Fix bug where VOID was posted as pending state...
* gst/gstbin.c: (gst_bin_recalc_state):
use _element_continue_state() to continue the state change.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_commit_state), (gst_element_set_state_func),
(gst_element_change_state), (gst_element_change_state_func):
Lots of state change cleanups, assign the STATE_RETURN in
a new continue_state() function that also propagates the
last return value from a state change to the app.
Update some debug statements with proper category.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init):
Don't leak class.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_loop):
An EOS event marks the queue as completely filled.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_get_position):
Some more debugging.
* gst/base/gstbasetransform.c: (gst_base_transform_finalize),
(gst_base_transform_init), (gst_base_transform_buffer_alloc),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain):
* gst/base/gstbasetransform.h:
Fix debugging,
Protect transform and concurrent buffer alloc with a new lock.
Try not to break ABI/API.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
An extra refcount is taken in basesrc.
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop):
Small cleanups, check for flushing after being unlocked from the
LIVE_LOCK. take refcounts correctly (not yet everywhere).
Don't send out EOS when going to READY.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't use invalid stream_time.
* gst/gstevent.c: (gst_event_new_newsegment):
stream_time in newsegment cannot be undefined.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
Simply set the right flag when going to playing, that's all
we need to do instead of calling a function inside the object
lock (that could take the lock as well and deadlock)
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_do_seek),
(gst_base_src_loop):
Don't warn, the peer element knows what to do best when
the seek failed, it might try something else.
Original commit message from CVS:
2005-10-21 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_base_src_query): Clean up percent
position reporting.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Update TODO
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Don't use clock time to report position when in EOS.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_query), (do_playing):
* gst/base/gstbasesrc.c: (gst_base_src_query):
* gst/elements/gstfilesink.c: (gst_file_sink_query):
* gst/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (find_element_get_length),
(gst_type_find_element_activate):
API change fix.
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_set_segment),
(gst_query_parse_segment):
* gst/gstquery.h:
Bundling query position/duration is not a good idea since duration
does not change much and we don't want to recalculate it for every
position query, so they are separated again..
Base value in segment query is not needed.
* gst/gstqueue.c: (gst_queue_handle_src_query):
* gst/gstutils.c: (gst_element_query_position),
(gst_element_query_duration), (gst_pad_query_position),
(gst_pad_query_duration):
* gst/gstutils.h:
Updates for query API change.
Added some docs here and there.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
2005-10-13 Thomas Vander Stichele <thomas at apestaart dot org>
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/base/gstbasesrc.c: (gst_base_src_get_range):
fix up debugging
* tools/gst-launch.c: (event_loop):
print out clock nicely
Original commit message from CVS:
2005-10-13 Julien MOUTTE <julien@moutte.net>
* gst/base/gstcollectpads.c: (gst_collectpads_event),
(gst_collectpads_chain):
* gst/base/gstcollectpads.h: Handle newsegment and store
informations
in CollectData.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/base/gstbasesrc.c: (gst_base_src_query):
fix more guint64<->gdouble conversions
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_buffer):
* gst/elements/gstfilesink.c: (gst_file_sink_event),
(gst_file_sink_render):
Some more debugging info.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
No need to prerol after receiving EOS.
* gst/elements/gstfakesink.c: (gst_fake_sink_event):
* gst/elements/gstfakesrc.c: (gst_fake_src_event_handler):
* gst/elements/gstidentity.c: (gst_identity_event):
Print events more verbosely.
Original commit message from CVS:
* check/gst/gstevent.c: (GST_START_TEST):
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesrc.c: (gst_base_src_default_newsegment):
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Added extra flag to newsegment for future API freeze.
Updated check and base elements.
Original commit message from CVS:
* configure.ac:
if we don't have glib, fail before testing 2.8
* gst/base/gstbasetransform.c: (gst_base_transform_change_state):
fix a leak, should fix plugins-base testsuite
Original commit message from CVS:
* gst/base/gsttypefindhelper.c: (helper_find_peek),
(gst_type_find_helper):
Check whether we have the requested data already in our list of
cached buffers before pulling a new buffer; also make the buffer
list a GSList. Speeds up typefinding by ca. 5-10% altogether.
Original commit message from CVS:
* gst/base/gsttypefindhelper.c: (helper_find_peek):
Fix evil typefind crasher: getrange() might return a short
buffer at the end of a file, but gst_type_find_peek() must
either return the full data as requested or NULL, but
never a short buffer.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_handle_buffer):
Prepare for doing QOS.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_handle_object), (gst_base_sink_event),
(gst_base_sink_wait), (gst_base_sink_handle_event),
(gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Repost EOS message while going to PLAYING if still EOS.
Make sure that when receiving a FLUSH_START we don't attempt
to sync on the clock anymore.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_default_newsegment),
(gst_base_src_newsegment), (gst_base_src_do_seek),
(gst_base_src_loop), (gst_base_src_start):
* gst/base/gstbasesrc.h:
Make the newsegment event customizable by subclasses.
Original commit message from CVS:
2005-10-07 Andy Wingo <wingo@pobox.com>
* check/elements/fakesrc.c (test_no_preroll): New check, checks
that setting a live fakesrc to PAUSED returns NO_PREROLL both
times.
* gst/base/gstbasesrc.c (gst_base_src_change_state): Allow a
NO_PREROLL from gst_element_change_state to fall through.
Original commit message from CVS:
2005-10-02 Andy Wingo <wingo@pobox.com>
* gst/gstobject.h (GST_OBJECT_REFCOUNT_VALUE): Just use the int.
It is volatile, after all.
* docs/design/part-gstghostpad.txt: Flesh out activation with
ghost pads.
* gst/base/gstbasesrc.c (gst_base_src_init): Use
GST_DEBUG_FUNCPTR.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_change_state):
Only error is an error.
* gst/gstbin.c: (gst_bin_change_state):
Better debugging.
* gst/gstpad.c: (gst_pad_alloc_buffer), (gst_pad_chain):
Also call pad_block in pad alloc.
* gst/gstutils.c: (gst_flow_get_name):
Better debugging.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_get_range):
Fix documentation typos. Add some more debug info.
Original commit message from CVS:
2005-09-28 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_base_src_unlock): Comment a bit in
lieu of real docs...
* gst/elements/gstfdsrc.c: Cleaned up a bit.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/base/gstbasesrc.h:
* gst/gstelement.h:
* gst/gstevent.h:
* gst/gstobject.h:
* gst/gstpad.h:
* gst/gstpipeline.c:
* gst/gstpipeline.h:
* gst/gstutils.h:
* gst/gstxml.h:
added two new functions to the docs
documents all undocumented GstXXXFlags
completed some incomplete docs
Original commit message from CVS:
2005-09-26 Andy Wingo <wingo@pobox.com>
* configure.ac:
* tests/Makefile.am:
* tests/memchunk: Remove memchunk benchmark stuff, this is taken
over by GLib bug 118439.
* gst/base/gstbasesink.c (gst_base_sink_wait): Factor out the wait
routines to a function.
* docs/libs/gstreamer-libs-sections.txt: I am a good person today.
* libs/gst/controller/gsthelper.c:
* libs/gst/controller/gstcontroller.h (gst_controller_sync_values)
(gst_object_sync_values): Renamed from sink_values. Ugh.
* libs/gst/controller/gsthelper.c: Update for __gst_controller_key.
* libs/gst/controller/gstcontroller.c (__gst_controller_key):
Renamed from controller_key, as it is exported.
* gst/gstvalue.c (_gst_value_initialize): Fake out the compiler.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_is_seekable), (gst_base_src_change_state):
Some more debugging info.
Original commit message from CVS:
* docs/README:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_chain):
* gst/gstpluginfeature.c:
* gst/gstutils.c:
various doc updates
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
change an assert into an error until it gets fixed properly
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_send_event), (gst_base_sink_peer_query),
(gst_base_sink_query):
Prepare for more accurate position reporting and query
handling.
* gst/gstelement.c: (gst_element_send_event),
(gst_element_set_state):
Add some comment.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_transform_size):
* gst/gstutils.c: (gst_util_set_value_from_string),
(gst_util_set_object_arg):
Don't put functional code in g_return_if_fail() or
g_return_val_if_fail() statements, otherwise things will
break when G_DISABLE_CHECKS is defined during compilation.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init):
Make sync property settable from subclass.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Set sync to FALSE by default.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_prepare_output_buf),
(gst_base_transform_handle_buffer):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
Remove the requirement for sub-classes to call the parent
implementation of prepare_output_buffer with a wrapper function.
* gst/gsttaglist.h:
* gst/gsttagsetter.h:
Fix #define wrapper
Original commit message from CVS:
* check/gst-libs/controller.c:
Header include fix.
* gst/base/gstbasetransform.c:
(gst_base_transform_default_prepare_buf),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
Some more basetransform changes and fixes to enable sub-classes
that modify buffer metadata only.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_init), (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
If the output pad has fixed allowed caps and input buffers
don't have any, set the fixed caps on outgoing buffers.
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
Original commit message from CVS:
2005-09-07 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesink.c (gst_base_sink_activate_pull): Fix a race
condition whereby the pad's task function is entered before the
pad_mode variable was set.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_pad_buffer_alloc):
Add comment.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Make state change function thread-safe.
* gst/gstpad.c: (gst_pad_alloc_buffer):
Set offset on generic buffer allocated by fallback.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
Handle newsegments more correctly.
* gst/gstbus.c:
Fix docs.
* gst/gstevent.c: (gst_event_new_newsegment):
A newsegment cannot have a start_time of -1
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_setcaps),
(gst_base_transform_handle_buffer):
Passthrough elements don't need the caps as they don't care.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_setcaps),
(gst_base_transform_handle_buffer), (gst_base_transform_chain):
Don't leak refcounts on buffers.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_chain), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
Handle the case where we are not negotiated more gracefully.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_handle_buffer):
passthrough elements can even do inplace on non writable
buffers (as they don't touch them).
Original commit message from CVS:
* gst/base/gstadapter.c: (gst_adapter_flush):
Flushing out 0 bytes is ok for this function.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
no newsegment gives a warning and sets the start/stop to
invalid.
* gst/base/gstbasetransform.c: (gst_base_transform_change_state),
(gst_base_transform_set_passthrough):
Some debug info.
* gst/gstminiobject.c: (gst_mini_object_ref):
Check refcount here too.
* gst/gstpad.c: (gst_pad_init):
Pads are initially flushing and refusing data.
* gst/gstutils.c: (gst_element_link_pads_filtered):
When adding a capsfilter element make sure it has the
same state as the parent bin.
Original commit message from CVS:
2005-08-28 Andy Wingo <wingo@pobox.com>
* gst/gstutils.h (GST_BOILERPLATE_FULL): Prototype instance_init
as having two arguments instead of just one. Allows superclasses
to access information on subclasses -- see the terrible for() loop
in gtype.c:g_type_create_instance for the reason why. All callers
changed.
Original commit message from CVS:
2005-08-26 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Check
element_set_state's return val.
(test_2_elements): Add test that's been disabled for months.
* gst/elements/gstfakesink.c: Cleanups. Add can-activate-push and
can-activate-pull properties.
* gst/elements/gstfakesrc.c: Cleanups. Add can-activate-push and
can-activate-pull properties. Implement is_seekable so fakesrc can
operate in pull mode.
* gst/base/gstbasesink.c (GstBaseSink): Remove has-loop, has-chain
properties.
(gst_base_sink_activate, gst_base_sink_activate_pull)
(gst_base_sink_activate_push): Make activation mode choosing work.
Cleanups.
(gst_base_sink_chain, gst_base_sink_loop): Assert activation mode
is right. Make pull mode work. Post an eos before pausing in pull
mode.
(gst_base_sink_change_state): Pay attention to the core's
change_state() return val.
* gst/base/gstbasesrc.c (GstBaseSrc): Remove has-loop,
has-getrange properties. Cleanups.
* gst/base/gstbasesrc.h (GstBaseSrc): Remove has_loop,
has_getrange and replace with can_activate_pull and
can_activate_push.
* gst/base/gstbasesink.h (GstBaseSink): Rearrange fields, add
locking comments. Remove has_loop, has_chain and replace with
can_activate_pull and can_activate_push.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/base/gstbasetransform.c: (gst_base_transform_transform_size),
fix up some debugging
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
handle and store timed NEWSEGMENT events so that subclasses that
calculate time by counting samples have a segment_start time they
need to add to their timestamps - see audioresample
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_size),
(gst_base_transform_configure_caps),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
Cache caps unit_size.
Make sure we cannot negotiate up and downstream at the
same time.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_get_times), (gst_base_sink_do_sync),
(gst_base_sink_handle_buffer), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Handle newsegment events correctly.
Drop buffers out of the segment range.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_transform_size), (gst_base_transform_getcaps),
(gst_base_transform_setcaps), (gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
use gboolean return values and pointers to size so we can use the
full GST_BUFFER_SIZE range (guint) for buffer sizes
use GstPadDirection for transform_caps
* gst/base/gstbasetransform.h:
rename get_size to get_unit_size since that's what it is
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_caps):
use GstPadDirection for transform_caps
* gst/gstbuffer.c: (gst_buffer_new_and_alloc):
* gst/gstutils.h:
cleanup and debugging
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
Many fixes and new features added by Thomas. Can now also do
transforms with variable sizes and a custom fixate_caps function.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_handle_buffer):
Also call the transform function if we have ANY caps.
* gst/gstpipeline.c: (gst_pipeline_set_new_stream_time):
Fix debug info.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_event_handler)
Don't pretend to handle seek events if the source is not seekable
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Remove extra parameter to debug output
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_activate_push):
Fix seek event handling.
* gst/gstpipeline.c: (gst_pipeline_change_state):
* gst/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_src_activate_push):
Don't start the src pad task on FLUSH_STOP if the pad
isn't linked.
Debug changes.
Original commit message from CVS:
* check/Makefile.am:
clean up environment for when registry gets built versus
when actual tests are run; valgrind seems to not report
leaks if GST_PLUGIN_PATH is set to some specific values
* check/gst/gstbin.c: (GST_START_TEST):
add more refcounting checks; maybe this exposes a
preroll lock bug ?
* common/check.mak:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/check/gstcheck.h:
* gst/gstbin.c: (bin_element_is_semi_sink), (gst_bin_get_state),
(gst_bin_change_state):
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_chain):
add/fix debugging/whitespace
Original commit message from CVS:
* check/Makefile.am:
Use CHECK_CFLAGS and CHECK_LIBS
* check/gst/gstevent.c: (event_probe), (test_event),
(GST_START_TEST):
Don't leak events.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_start), (gst_base_src_stop),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Sprinkle gst_base_src_stop liberally around error paths to fix
problems reusing a source after failed state changes.
* gst/base/gsttypefindhelper.c: (helper_find_peek),
(helper_find_suggest), (gst_type_find_helper):
Extra debug output. Don't segfault on GST_PAD_GETRANGEFUNC = NULL
* gst/gstevent.h:
* docs/gst/tmpl/gstevent.sgml:
Migrate part of the docs from the SGML file. Wait for ensonic to
tell me how I did it wrong ;)
* tools/gst-typefind.c: (main):
Extra robustness to state changes between files.
Original commit message from CVS:
2005-08-18 Andy Wingo <wingo@pobox.com>
Make sure that when a pipeline goes to PLAYING, that data has
actually hit the sink.
* check/states/sinks.c (test_sink): A sink that doesn't get any
data shouldn't return SUCCESS for going to either PLAYING or
PAUSED. Test also the return values on the way back down.
* gst/gstelement.c (gst_element_set_state): When changing the
state of an element currently changing state asynchronously, go to
lost-state after commiting the pending state. Makes future calls
to get_state continue to return ASYNC.
* gst/base/gstbasesink.c (gst_base_sink_change_state): Return
ASYNC when going to PLAYING if we still don't have preroll, as can
happen with live sources.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
2005-08-17 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasetransform.c: Debug changes.
* gst/gstutils.h:
* gst/gstutils.c (gst_bin_watch_for_state_change): Add function to
ensure bins post state change messages. A bit of a hack but I can't
think of a way to avoid it.
* check/gst/gstbin.c (test_watch_for_state_change): Added test.
Original commit message from CVS:
2005-08-16 Andy Wingo <wingo@pobox.com>
* gst/base/gstadapter.h:
* gst/base/gstadapter.c (gst_adapter_take): New function, like
peek() but you own the data. Not terribly efficient atm.
Original commit message from CVS:
* gst/base/gsttypefindhelper.c: (helper_find_peek),
(gst_type_find_helper):
The memory returned by gst_type_find_peek() needs to
stay valid until the end of a typefind function, and
typefind functions may keep results from different
offsets around, so we can't just unref the buffer from
the previous _peek(), but have to save all buffers
returned by _peek() until typefinding is done and only
free them then.
Original commit message from CVS:
* gst/base/gstadapter.h:
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.h:
* gst/base/gstpushsrc.h:
* gst/gstiterator.h:
Add padding to our base elements' class and instance structs and
to GstIterator (you will need to rebuild all plugins and apps!)
Original commit message from CVS:
added long/short desc for controller docs
added collectpads base class docs
added correct includes to base-class docs
Original commit message from CVS:
2005-08-04 Andy Wingo <wingo@pobox.com>
* gst/elements/gstcapsfilter.c: Reimplement using basetransform,
fixes buffer_alloc proxying among other things.
* gst/base/gstbasetransform.c:
* gst/base/gstbasetransform.h:
Revert patch to gstbasetransform from 7-28 removing
delay_configure.
* gst/base/gstbasetransform.h (GstBaseTransformClass.get_size):
* gst/base/gstbasetransform.c (gst_base_transform_get_size):
Semantics changed, should return not the size of the output buffer
but the byte size of a buffer with a given caps.
* gst/base/gstbasetransform.c (gst_base_transform_getcaps): Better
debug object.
(gst_base_transform_configure_caps): Don't set out_size here: (in,
out) are not the pad caps until setcaps finishes.
(gst_base_transform_buffer_alloc): Proxy the buffer_alloc for the
not-in-place case as well. Deal with changing from in-place to
not-in-place within calling pad_alloc_buffer. Still a bit
concerned about the overhead here...
Original commit message from CVS:
* gst/base/gstcollectpads.c: (gst_collectpads_finalize),
(gst_collectpads_stop):
Broadcast the condition when shutting down, to make sure we wake all
threads up. Shut down pads on finalize, for safety.
Original commit message from CVS:
2005-08-01 Jan Schmidt <thaytan@mad.scientist.com>
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Handle PAUSED->READY->PAUSED transition after negotiation
occurred already.
* gst/gstmessage.c: (gst_message_init):
Extra piece of debug for new messages.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small additions.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_get_times), (gst_base_sink_do_sync),
(gst_base_sink_activate_push), (gst_base_sink_activate_pull):
* gst/base/gstbasesink.h:
discont values are gint64, handle the math correctly.
* gst/base/gstbasesrc.c: (gst_base_src_loop):
Make the basesrc report error if the source pad is not linked.
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_src_activate_push):
Make queue collect data even if the srcpad is not linked.
Start pushing out data as soon as it is linked.
* gst/gstutils.c: (gst_element_unlink), (gst_flow_get_name):
* gst/gstutils.h:
Added gst_flow_get_name() to ease error reporting.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start):
* gst/base/gstbasesrc.h:
Add a gboolean to decide when to push out a discont.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_set_property), (gst_queue_get_property):
Some cleanups.
* tests/threadstate/threadstate1.c: (main):
Make a thread test compile and run... very silly..
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_get_range):
Make sure we never call the create function is we
got deactivated.
Original commit message from CVS:
* docs/design/part-clocks.txt:
* docs/design/part-events.txt:
* gst/base/gstbasesrc.c: (gst_base_src_do_seek):
Small docs updates.
Only update the seeking values when we are not
busy streaming.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_loop),
(gst_base_src_activate_push):
Send discont event from the loop function, as pads
aren't activated yet in the activate_push handler.
* gst/gstbin.c: (bin_bus_handler):
Don't leak element name.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_get_times),
(gst_base_sink_do_sync), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Store and use discont values when syncing buffers as described
in design docs.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_push):
Push discont event when starting.
* gst/elements/gstidentity.c: (gst_identity_transform):
Small cleanups.
* gst/gstbin.c: (gst_bin_change_state):
Small cleanups in base_time distribution.
* gst/gstelement.c: (gst_element_set_base_time),
(gst_element_get_base_time), (gst_element_change_state):
* gst/gstelement.h:
Added methods for the base_time of the element.
Some MT fixes.
* gst/gstpipeline.c: (gst_pipeline_send_event),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time),
(gst_pipeline_get_last_stream_time):
* gst/gstpipeline.h:
MT fixes.
Handle seeking as described in design doc, remove stream_time
hack.
Cleanups clock and stream_time selection code. Added accessors
for the stream_time.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't unref the caps we passed to gst_caps_make_writable() after
passing them. gst_caps_make_writable() will do that for us.
Original commit message from CVS:
2005-07-15 Andy Wingo <wingo@pobox.com>
* tools/gst-typefind.c: Update, add copyright block.
* gst/base/gstbasesrc.c (gst_base_src_default_negotiate):
Normalize and truncate caps before fixation.
* gst/gstcaps.h:
* gst/gstcaps.c (gst_caps_truncate): New function, destructively
discards all but the first structure from its argument.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
Original commit message from CVS:
2005-07-13 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_base_src_start): Post an error if the
source couldn't negotiate.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Added more debug info in the negotiate process.
* gst/gstmessage.h:
Prepare for segment playback.
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_set_caps):
Better debugging.
* gst/gstutils.c:
Some more docs.
* tools/gst-launch.c: (main):
NULL pipeline on errors.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_default_negotiate), (gst_base_src_negotiate):
Allow subclasses to implement their own negotiation.
Original commit message from CVS:
* examples/Makefile.am:
* examples/helloworld/helloworld.c: (event_loop), (main):
* examples/queue/queue.c: (event_loop), (main):
* examples/queue2/queue2.c: (main):
Update a couple of the examples to work again.
* gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_empty),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_handle_event):
Spelling corrections and extra debug.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (is_eos),
(gst_bin_add_func), (bin_element_is_sink), (gst_bin_get_state),
(gst_bin_change_state), (gst_bin_dispose), (bin_bus_handler):
* gst/gstbin.h:
* gst/gstpipeline.c: (gst_pipeline_init), (gst_pipeline_dispose),
(gst_pipeline_change_state):
* gst/gstpipeline.h:
Move the bus handler for children to the GstBin, and create a
separate bus for receiving messages from children to the one the
bus sends 'upwards' on.
Original commit message from CVS:
2005-07-05 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasetransform.c (gst_base_transform_setcaps):
Default to returning TRUE for the case when tranform_caps returns
a fixed caps, like for identity or volume.
Original commit message from CVS:
2005-07-05 Andy Wingo <wingo@pobox.com>
* check/gst/gstbus.c (pound_bus_with_messages):
* check/gst/gstmessage.c (START_TEST):
* check/pipelines/simple_launch_lines.c (got_handoff): Application
message API change.
* gst/base/gstbasetransform.c (gst_base_transform_setcaps): More
logic weaks here: always run transform_caps, trying passthrough
operation only if the original caps intersects with the transform.
* gst/gstpad.c (gst_pad_link_check_compatible_unlocked): Debug
source and sink caps.
* gst/base/gstbasetransform.c (gst_base_transform_getcaps):
Intersect the peer caps with the pad template before going into
transform_caps.
(gst_base_transform_transform_caps): More debugging.
* gst/gstmessage.h (gst_message_new_application): Take a GstObject
src argument.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_empty),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Some tweaks, only EOS and a buffer complete a preroll.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
Small debug line.
* gst/gstclock.h:
map SIGNAL and BROADCAST to the right function.
* gst/gstobject.h:
Remove redundant braces.
* gst/gstpad.c: (gst_pad_set_caps):
Don't call setcaps function when reseting caps to NULL.
* gst/gstsystemclock.c: (gst_system_clock_dispose),
(gst_system_clock_async_thread), (gst_system_clock_id_wait_async),
(gst_system_clock_id_unschedule):
Use BROADCAST as this is what we do.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
We are actually prerolling before commiting the state
change.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_preroll_queue_flush),
(gst_basesink_event), (gst_basesink_deactivate):
Flushing the preroll queue always needs to unlock the waiters.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_preroll_queue_empty),
(gst_basesink_handle_object), (gst_basesink_event),
(gst_basesink_do_sync), (gst_basesink_handle_event),
(gst_basesink_change_state):
* gst/gsttask.h:
Right, two problems here: ghostpads don't take locks and
glib _rec_mutex_lock_full() with depth==0 still locks.
Catch illegal locking and g_warn them.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_set_property),
(gst_basesink_preroll_queue_empty),
(gst_basesink_preroll_queue_flush), (gst_basesink_handle_object),
(gst_basesink_event), (gst_basesink_do_sync),
(gst_basesink_handle_event), (gst_basesink_handle_buffer),
(gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate),
(gst_basesink_change_state):
Reworked the base sink, handle event and buffer serialisation
correctly and removed possible deadlock.
Handle EOS correctly.
Original commit message from CVS:
2005-06-23 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_basesrc_get_range): Check if the
offset is greater than the file's size.
Original commit message from CVS:
Added support for live sources and other elements that
cannot do preroll.
Updated design docs, added live-source design doc.
Implemented live source functionality in basesrc
Fix error condition in _bin_get_state()
Implement live source handling in -launch.
Added check for live sources.
Fixed case in GstBin where elements were changed state
multiple times.
Original commit message from CVS:
2005-06-17 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesink.c (gst_basesink_chain): Remove bogus
assert; it's always possible that the pad gets deactivated in
between the checks in gstpad.c and the implementation. Rely on
finish_preroll() to return a FLUSHING or similar instead of on the
assert.
Original commit message from CVS:
2005-06-17 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesink.c (gst_basesink_event): Only wait for the
clock and post an EOS message if we come out of finish_preroll in
the playing state.
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
2005-06-02 Andy Wingo <wingo@pobox.com>
* gst/elements/gsttypefindelement.c (do_pull_typefind): Query the
file size, pass it on to the type find helper.
* gst/base/gstbasesrc.c (gst_basesrc_do_seek): Set the
segment_start and segment_end properly according to the seek
method. Segment_end is still a bit flaky because offset can be
negative for CUR and END cases, but it takes -1 as an "unset"
value.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_basesrc_activate):
Don't go in pull mode for non-seekable sources.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init),
(gst_type_find_element_dispose), (gst_type_find_handle_src_query),
(free_entry), (stop_typefinding),
(gst_type_find_element_handle_event), (find_peek),
(gst_type_find_element_chain), (do_pull_typefind),
(gst_type_find_element_change_state):
Allow typefinding (w/o seeking) in push-mode, simplified version
of what was in 0.8.
* gst/gstutils.c: (gst_buffer_join):
* gst/gstutils.h:
gst_buffer_join() from 0.8.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_finish_preroll),
(gst_basesink_chain_unlocked), (gst_basesink_activate):
* gst/gstminiobject.c: (gst_mini_object_get_type),
(gst_mini_object_free):
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_push), (gst_pad_push_event):
* gst/gstqueue.c: (gst_queue_change_state):
Don't queue buffers in basesink when we are flushing.
Unref buffer when flushing in basesink.
Flush queue when going to READY
Unref buffer when _push() returns an error.
Don't free MiniObject instance when refcount is incremented
in _finalize() so that we can recover objects.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_basesrc_change_state):
Remove implicit cast from gboolean to GstElementStateReturn;
make sure we still return failure in paused => ready case if
the parent class fails to change state and our own stop
vfunc succeeds.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_init),
(gst_basesink_activate):
* gst/base/gstbasesrc.c: (gst_basesrc_unlock),
(gst_basesrc_is_seekable):
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(bin_element_is_sink), (gst_bin_change_state):
* gst/gstelement.c: (gst_element_add_pad), (gst_element_query):
* gst/gstelement.h:
Identify sinks by their flag to avoid overly complicated
checks (fow now).
Do state changes even for elements not reachable from the
sinks.
BaseSink is a sink now :)
Some more debugging info in the basesrc.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_basesrc_do_seek):
Discont event offset format should be GST_FORMAT_BYTES,
not GST_FORMAT_TIME.
Original commit message from CVS:
2005-05-10 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfakesink.c (gst_fakesink_render): Er, emit with
*all* the arguments.
* gst/base/gstbasetransform.c (gst_base_transform_event): Grab the
stream lock if it's a FLUSH_DONE; normal flushes don't get the
lock (according to the docs -- if this is wrong change the docs).
* gst/gstpipeline.c (gst_pipeline_change_state): Set the bus to
flush messages in the NULL state.
* gst/gstbus.c (gst_bus_post): If a bus is flushing, unref the
message immediately and return.
(gst_bus_set_flushing): New function. If a bus is flushing, it
flushes out any queued messages and immediately unrefs new
messages. This is so when an element goes to NULL, all of the
unhandled messages coming from it can be freed, and their
references to the element dropped. In other words: message source
ref considered harmful :P
* gst/gstbin.c (gst_bin_change_state): Unref peer element when
we're finished with it.
* gst/gstmessage.c (gst_message_new_state_changed):
Original commit message from CVS:
2005-05-09 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasetransform.c (gst_base_transform_proxy_getcaps):
Intersect the peer's caps with our caps.
Original commit message from CVS:
Remove old query functions. Ported old code.
Added position/convert helper functions to gstutils.
Reordered gstpad.c code, grouping relevant things.
Remove gst_message_new(), always need to speficy a specific
message.
Original commit message from CVS:
2005-05-06 Andy Wingo <wingo@pobox.com>
* gst/gstquery.h
* gst/gstquery.c (_gst_query_initialize): Extend GstQuery from
GstData, init a memchunk.
(standard_definitions): Add a few query types, deprecate a few.
(gst_query_get_type): New proc.
(_gst_query_copy, _gst_query_free, gst_query_new): GstData
implementation.
(gst_query_new_application, gst_query_get_structure): New public
procs.
* docs/design/draft-query.txt: Removed LINKS from the query types,
because all the rest can be dispatched to other pads -- seemed
ugly to have a query that couldn't be dispatched. internal_links
is fine as a pad method.
* gst/gstpad.h: Add query2 as a pad method, add the new functions
in gstpad.c, but maintain binary compatibility for the moment.
Will fix before 0.9 is out.
* gst/gstqueryutils.c:
* gst/gstqueryutils.h: New files, implement 3 methods for each
query type: parse_query, parse_response, and set. Probably need an
allocator as well.
* gst/gst.h: Add gstquery.h and gstqueryutils.h to the list.
* gst/elements/gstfilesink.c (gst_filesink_query2):
* gst/base/gstbasesrc.c (gst_basesrc_query2): Replace old query,
query_types, and formats methods.
* gst/gstpad.c (gst_pad_query2, gst_pad_query2_default)
(gst_pad_set_query2_function): New functions.
(gst_real_pad_init): Set query2_default as the default query2
function. Basically just dispatches to internally linked pads.
Needs review!
* gst/gstdata_private.h (_GST_DATA_INIT): Set data->refcount to 1
without using the atomic operations. Only one thread can possibly
be accessing the data at this point. Changed so as to avoid
gst_atomic operations.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_proxy_getcaps):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_getcaps):
* gst/gstpad.c: (gst_pad_peer_get_caps):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_getcaps),
(gst_queue_bufferalloc), (gst_queue_handle_sink_event),
(gst_queue_src_activate), (gst_queue_change_state):
* gst/gstqueue.h:
* gst/gstutils.c: (gst_element_get_compatible_pad_template),
(intersect_caps_func):
Fix gst_pad_peer_get_caps(), make it return NULL if no peer.
Always take QUEUE_LOCK after STREAM_LOCK or we might deadlock.
Some fixes for the peer_get_caps() change.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_preroll_queue_empty),
(gst_basesink_handle_buffer), (gst_basesink_chain_unlocked),
(gst_basesink_activate):
Actually do something with error codes returned from the push
functions.
Original commit message from CVS:
* docs/design/draft-push-pull.txt:
* docs/design/draft-query.txt:
* gst/base/gstbasesrc.c: (gst_basesrc_get_range_unlocked),
(gst_basesrc_start):
Added draft for new query API.
Added draft for better selecting scheduling methods.
Make basesrc ignore length if the subclass does not support
it.
Original commit message from CVS:
* gst/Makefile.am: Remove as-libtool stuff. It's likely not
needed with new versions of libtool (nobody will confirm this),
and hard to carry around.
* gst/autoplug/Makefile.am:
* gst/base/Makefile.am:
* gst/elements/Makefile.am:
* gst/indexers/Makefile.am:
* gst/schedulers/Makefile.am:
* libs/gst/bytestream/Makefile.am:
* libs/gst/control/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/getbits/Makefile.am:
Original commit message from CVS:
2005-04-18 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_basesrc_set_property)
(gst_basesrc_get_property): BLOCKSIZE is a ULONG. Rename ARG_...
to PROP_....
Original commit message from CVS:
Added typefind helper.
Small preroll fix in the base sink.
Disable typefind code in basesrc.
Crude port of typefindelement.
Fakesrc cleanups.
Original commit message from CVS:
* gst/gstplugin.c: (gst_plugin_check_file), (gst_plugin_load_file):
Switch to using G_MODULE_BIND_LOCAL, which means plugins are now
expected to link against libgstreamer.
* gst/base/Makefile.am: link against libgstreamer
* gst/elements/Makefile.am: same
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
Original commit message from CVS:
2005-03-29 Andy Wingo <wingo@pobox.com>
* po/, docs/gst/: Commit automatic changes to docs and po files.
* gst/elements/Makefile.am (libgstelements_la_LDFLAGS): Link to
the versioned libgstbase.
* check/Makefile.am: Depend on an unversioned gst-register, seems
to make autoconf happier.
* gst/base/Makefile.am: Make libgstbase a versioned lib.
Original commit message from CVS:
Added state change code.
Added/updated docs.
Added sink base class, make fakesink extend the base class.
Small cleanups in GstPipeline.
