Original commit message from CVS:
* tests/check/pipelines/stress.c: (GST_START_TEST):
Make sure we set the pipeline back to the NULL state before
dropping our final reference.
Original commit message from CVS:
* tests/check/elements/tee.c: (GST_START_TEST):
Make the tee stress-test a little less stressful so it doesn't just
time out on slow-machines, and remove a small race when it's starting
up by adding a get_state() call.
Original commit message from CVS:
* pkgconfig/gstreamer-check-uninstalled.pc.in:
* pkgconfig/gstreamer-check.pc.in:
Substitute the CFLAGS for libcheck into our .pc file too so that
dependent modules will pick it up properly if libcheck is installed
into some other prefix.
Original commit message from CVS:
* configure.ac:
Revert the pkg-config check for libcheck, since it pulls in the
wrong non-PIC libcheck.a on Ubuntu and probably Fedora too. We need
a proper solution, either from the check project, or something else.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_parse_value):
When deserialising foo=bar without a type cast, check if it's a
boolean before falling back to a string type, otherwise things like
audiotestsrc ! audio/x-raw-int,signed=true ! fakesink won't work,
because the filtercaps end up having a signed=(string)true field,
which causes problems later when intersection caps.
* tests/check/gst/gststructure.c: (GST_START_TEST):
Add a unit test for this.
Original commit message from CVS:
Reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_add_interpolation_control_source),
(gst_controlled_property_new), (gst_controlled_property_free),
(gst_controller_find_controlled_property),
(gst_controller_new_valist), (gst_controller_new_list),
(gst_controller_new), (gst_controller_remove_properties_valist),
(gst_controller_remove_properties_list),
(gst_controller_remove_properties),
(gst_controller_set_property_disabled),
(gst_controller_set_disabled), (gst_controller_set_control_source),
(gst_controller_get_control_source), (gst_controller_get),
(gst_controller_sync_values), (gst_controller_get_value_array),
(_gst_controller_dispose), (gst_controller_get_type),
(gst_controlled_property_set_interpolation_mode),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_get_all), (gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstcontrolsource.c:
(gst_control_source_class_init), (gst_control_source_init),
(gst_control_source_get_value),
(gst_control_source_get_value_array), (gst_control_source_bind):
* libs/gst/controller/gstcontrolsource.h:
* libs/gst/controller/gsthelper.c: (gst_object_set_control_source),
(gst_object_get_control_source):
* libs/gst/controller/gstinterpolation.c:
(gst_interpolation_control_source_find_control_point_node),
(gst_interpolation_control_source_get_first_value),
(_interpolate_none_get), (interpolate_none_get),
(interpolate_none_get_boolean_value_array),
(interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(_interpolate_trigger_get), (interpolate_trigger_get),
(interpolate_trigger_get_boolean_value_array),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_control_point_free), (gst_interpolation_control_source_reset),
(gst_interpolation_control_source_new),
(gst_interpolation_control_source_set_interpolation_mode),
(gst_interpolation_control_source_bind),
(gst_control_point_compare), (gst_control_point_find),
(gst_interpolation_control_source_set_internal),
(gst_interpolation_control_source_set),
(gst_interpolation_control_source_set_from_list),
(gst_interpolation_control_source_unset),
(gst_interpolation_control_source_unset_all),
(gst_interpolation_control_source_get_all),
(gst_interpolation_control_source_get_count),
(gst_interpolation_control_source_init),
(gst_interpolation_control_source_finalize),
(gst_interpolation_control_source_dispose),
(gst_interpolation_control_source_class_init):
* libs/gst/controller/gstinterpolationcontrolsource.h:
* libs/gst/controller/gstinterpolationcontrolsourceprivate.h:
API: Refactor GstController into the core controller which can take
a GstControlSource for providing actual values for timestamps.
Implement a interpolation control source and use this for backward
compatibility, deprecate a bunch of functions that are now handled
by GstControlSource or GstInterpolationControlSource.
Make it possible to disable the controller completely or only for
specific properties. Fixes#450711.
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add new functions and classes to the docs.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* tests/examples/controller/audio-example.c: (main):
Port unit test and example to the new API and add some new
unit tests.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_get_internal_links), (apply_buffer),
(single_queue_overrun_cb), (gst_single_queue_new):
Implement non-default GstPadIntLinkFunction for multiqueue pads so that
the pipeline layout can be tracked correctly. Fixes#453732.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_base_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc),
(gst_tee_do_push), (clear_pads), (gst_tee_handle_buffer),
(gst_tee_chain):
Be a lot smarter when deciding what srcpad to use for proxying
the buffer_alloc. Also handle pad added/removed when doing so.
Fixes#357959.
Keep track of what pads we already pushed on in case we have pads
added/removed while pushing. Fixes#374639
* tests/check/Makefile.am:
* tests/check/elements/tee.c: (handoff), (GST_START_TEST),
(tee_suite):
Added unit test for pad resync.
Original commit message from CVS:
translation by: Tommi Vainikainen <Tommi.Vainikainen@iki.fi>
* po/LINGUAS:
* po/fi.po:
Added new Finnish translation.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(single_queue_overrun_cb):
When figuring out when a queue is filled, use our internal time estimate
based on segments, just like check_full does.
Original commit message from CVS:
Patch by: Tim Angus <tim at ngus dot net>
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_set_property):
Take a reference instead of a copy when setting "caps".
Fix documentation to clarify this behaviour. Fixes#449414.
Original commit message from CVS:
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstplugin.c: (gst_plugin_init):
* gst/gstpluginfeature.c: (gst_plugin_feature_init):
* gst/gstquery.c: (gst_query_get_type):
* gst/gstregistry.c: (gst_registry_init):
* gst/gsturi.c: (gst_uri_handler_base_init):
Remove empty instance_init() functions to save relocs and lessen the
noise. Remove some of the function prototypes that are doubled by
G_DEFINE_TYPE.
Original commit message from CVS:
Patch by: Étienne Noreau-Hébert <etienne at deepunder dot org>
* gst/gstghostpad.c: (gst_proxy_pad_save_thyself):
Add peer and direction in the XML serialisation of ghostpads.
Fixes#449226.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_single_queue_flush), (apply_segment), (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_loop),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_src_activate_push), (wake_up_next_non_linked),
(compute_high_id), (gst_single_queue_new):
* plugins/elements/gstmultiqueue.h:
Take the multiqueue lock when updating the fill level so we don't get
confused.
After applying a buffer or event on the src pad segment, make sure to
call gst_data_queue_limits_changed() to get the data queue to unblock
and check the filled state again.
Rework the not-linked pad handling so the logic is that not-linked
pads can push as fast as they like, but only so they never get
ahead of any linked pads.
* tests/check/elements/multiqueue.c: (mq_sinkpad_to_srcpad),
(mq_dummypad_getcaps), (mq_dummypad_chain), (mq_dummypad_event),
(run_output_order_test), (GST_START_TEST), (multiqueue_suite):
Add a test to check that not-linked pads always stay behind
linked pads.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.c:
* gst/gstutils.c: (gst_type_register_static_full):
Beef up and include the docs for gst_type_register_static_full and
gst_element_class_set_details_simple and add the API keyword
in the ChangeLog.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): New test, partially disabled until
basesink is fixed.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_push_state_continue),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Move the common code for posting state-change messages into
one function.
Broadcast the state signal after we posted the messages.
Mark the bin as busy when it's doing a state-change.
Make sure async-start/done messages don't interfere with the bin's
state when it's busy.
After the state change, let the bin check which elements completed the
state change while it was busy so that it can update its state.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
Make sure we don't reference the buffer/event after we have given away
ownership in the queue.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_flush),
(gst_multi_queue_chain), (gst_multi_queue_sink_event):
Update queue state _after_ adding the item in the queue because else we
could end up being full without the element added yet.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_continue_func),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
* gst/gstbin.h:
Immediatly commit the toplevel bin state when receiving an async-done
message. This enables us to avoid spawning a thread to commit the state
in some common cases and it also avoids some races.
Avoid spawning a state thread when adding/removing async elements to a
toplevel bin. Instead we immediatly update the bin state.
Get rid of iterating all the children when getting the state in the bin
because it is now always up-to-date.
Fix bug where locked elements would always return _SUCCESS even it they
returned NO_PREROLL before being locked.
Fix the order of the state_change, async-start/done messages that was
sometimes incorrect.
Mark the state_dirty field as deprecated, we don't need it anymore as we
are always up-to-date.
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_continue_state):
Small debug inprovements.
Return the previous element state return when nothing is pending instead
of blindly returning SUCCESS.
* tests/check/generic/sinks.c: (GST_START_TEST), (pad_blocked_cb),
(gst_sinks_suite):
Add a whole bunch of new testcases.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_item_destroy),
(gst_multi_queue_item_new):
Don't use GSlice because we don't depend on >= 2.10 yet.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
