Commit graph

7937 commits

Author SHA1 Message Date
Jan Schmidt
4fb00301dd tests/check/elements/multiqueue.c: Use a GStaticMutex to protect all cases where libcheck fail_if/fail_unless macros ...
Original commit message from CVS:
* tests/check/elements/multiqueue.c: (mq_dummypad_chain),
(mq_dummypad_event), (run_output_order_test):
Use a GStaticMutex to protect all cases where libcheck
fail_if/fail_unless macros might be called from multiple threads
simultaneously to avoid errors like:
"check_pack.c:107: :-1081725400:Bad message type arg"
2007-07-16 16:04:49 +00:00
Jan Schmidt
54eb646c3e tests/check/pipelines/stress.c: Make sure we set the pipeline back to the NULL state before dropping our final refere...
Original commit message from CVS:
* tests/check/pipelines/stress.c: (GST_START_TEST):
Make sure we set the pipeline back to the NULL state before
dropping our final reference.
2007-07-16 15:19:06 +00:00
Jan Schmidt
615cc36296 tests/check/elements/tee.c: Make the tee stress-test a little less stressful so it doesn't just time out on slow-mach...
Original commit message from CVS:
* tests/check/elements/tee.c: (GST_START_TEST):
Make the tee stress-test a little less stressful so it doesn't just
time out on slow-machines, and remove a small race when it's starting
up by adding a get_state() call.
2007-07-16 14:55:26 +00:00
Stefan Kost
8575f8f068 gst/gst.c: Avoid reading registry twice on startup. Fixes #457322.
Original commit message from CVS:
* gst/gst.c:
Avoid reading registry twice on startup. Fixes #457322.
2007-07-16 12:36:18 +00:00
Jan Schmidt
b24276b207 pkgconfig/: Substitute the CFLAGS for libcheck into our .pc file too so that dependent modules will pick it up proper...
Original commit message from CVS:
* pkgconfig/gstreamer-check-uninstalled.pc.in:
* pkgconfig/gstreamer-check.pc.in:
Substitute the CFLAGS for libcheck into our .pc file too so that
dependent modules will pick it up properly if libcheck is installed
into some other prefix.
2007-07-13 14:11:22 +00:00
Jan Schmidt
dd064a2a2d configure.ac: Revert the pkg-config check for libcheck, since it pulls in the wrong non-PIC libcheck.a on Ubuntu and ...
Original commit message from CVS:
* configure.ac:
Revert the pkg-config check for libcheck, since it pulls in the
wrong non-PIC libcheck.a on Ubuntu and probably Fedora too. We need
a proper solution, either from the check project, or something else.
2007-07-13 13:49:14 +00:00
Stefan Kost
0e4bd38e13 configure.ac: Use pkg-config to locate check.
Original commit message from CVS:
* configure.ac:
Use pkg-config to locate check.
2007-07-12 11:10:22 +00:00
Stefan Kost
54529a756e gst/gsttaglist.c: Fix doc syntax.
Original commit message from CVS:
* gst/gsttaglist.c:
Fix doc syntax.
* gst/gstutils.c:
* gst/gstutils.h:
Add deprecation guards.
* libs/gst/base/gstcollectpads.h:
Don't document object (this is implicitly private).
2007-07-10 20:10:16 +00:00
Tim-Philipp Müller
cf8abdf3a3 gst/gststructure.c: When deserialising foo=bar without a type cast, check if it's a boolean before falling back to a ...
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_parse_value):
When deserialising foo=bar without a type cast, check if it's a
boolean before falling back to a string type, otherwise things like
audiotestsrc ! audio/x-raw-int,signed=true ! fakesink won't work,
because the filtercaps end up having a signed=(string)true field,
which causes problems later when intersection caps.
* tests/check/gst/gststructure.c: (GST_START_TEST):
Add a unit test for this.
2007-07-08 14:11:53 +00:00
Sebastian Dröge
286cd75855 libs/gst/controller/: API: Refactor GstController into the core controller which can take a GstControlSource for prov...
Original commit message from CVS:
Reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_add_interpolation_control_source),
(gst_controlled_property_new), (gst_controlled_property_free),
(gst_controller_find_controlled_property),
(gst_controller_new_valist), (gst_controller_new_list),
(gst_controller_new), (gst_controller_remove_properties_valist),
(gst_controller_remove_properties_list),
(gst_controller_remove_properties),
(gst_controller_set_property_disabled),
(gst_controller_set_disabled), (gst_controller_set_control_source),
(gst_controller_get_control_source), (gst_controller_get),
(gst_controller_sync_values), (gst_controller_get_value_array),
(_gst_controller_dispose), (gst_controller_get_type),
(gst_controlled_property_set_interpolation_mode),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_get_all), (gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstcontrolsource.c:
(gst_control_source_class_init), (gst_control_source_init),
(gst_control_source_get_value),
(gst_control_source_get_value_array), (gst_control_source_bind):
* libs/gst/controller/gstcontrolsource.h:
* libs/gst/controller/gsthelper.c: (gst_object_set_control_source),
(gst_object_get_control_source):
* libs/gst/controller/gstinterpolation.c:
(gst_interpolation_control_source_find_control_point_node),
(gst_interpolation_control_source_get_first_value),
(_interpolate_none_get), (interpolate_none_get),
(interpolate_none_get_boolean_value_array),
(interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(_interpolate_trigger_get), (interpolate_trigger_get),
(interpolate_trigger_get_boolean_value_array),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_control_point_free), (gst_interpolation_control_source_reset),
(gst_interpolation_control_source_new),
(gst_interpolation_control_source_set_interpolation_mode),
(gst_interpolation_control_source_bind),
(gst_control_point_compare), (gst_control_point_find),
(gst_interpolation_control_source_set_internal),
(gst_interpolation_control_source_set),
(gst_interpolation_control_source_set_from_list),
(gst_interpolation_control_source_unset),
(gst_interpolation_control_source_unset_all),
(gst_interpolation_control_source_get_all),
(gst_interpolation_control_source_get_count),
(gst_interpolation_control_source_init),
(gst_interpolation_control_source_finalize),
(gst_interpolation_control_source_dispose),
(gst_interpolation_control_source_class_init):
* libs/gst/controller/gstinterpolationcontrolsource.h:
* libs/gst/controller/gstinterpolationcontrolsourceprivate.h:
API: Refactor GstController into the core controller which can take
a GstControlSource for providing actual values for timestamps.
Implement a interpolation control source and use this for backward
compatibility, deprecate a bunch of functions that are now handled
by GstControlSource or GstInterpolationControlSource.
Make it possible to disable the controller completely or only for
specific properties. Fixes #450711.
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add new functions and classes to the docs.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* tests/examples/controller/audio-example.c: (main):
Port unit test and example to the new API and add some new
unit tests.
2007-07-06 21:50:02 +00:00
Mark Nauwelaerts
fc70188d3e plugins/elements/gstmultiqueue.c: Implement non-default GstPadIntLinkFunction for multiqueue pads so that the pipelin...
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_get_internal_links), (apply_buffer),
(single_queue_overrun_cb), (gst_single_queue_new):
Implement non-default GstPadIntLinkFunction for multiqueue pads so that
the pipeline layout can be tracked correctly. Fixes #453732.
2007-07-05 09:06:02 +00:00
Stefan Kost
06aa9c442b docs/: Simplity --extra-dir as gtkdoc scans recursively.
Original commit message from CVS:
* docs/gst/Makefile.am:
* docs/libs/Makefile.am:
* docs/plugins/Makefile.am:
Simplity --extra-dir as gtkdoc scans recursively.
2007-07-05 08:42:42 +00:00
Wim Taymans
94828d9ac6 tools/gst-launch.c: When we got an error, there is no point in waiting for preroll when shutting down.
Original commit message from CVS:
* tools/gst-launch.c: (main):
When we got an error, there is no point in waiting for preroll when
shutting down.
2007-07-03 17:01:51 +00:00
Wim Taymans
4cc7b818fd plugins/elements/gsttee.c: Be a lot smarter when deciding what srcpad to use for proxying the buffer_alloc. Also hand...
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_base_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc),
(gst_tee_do_push), (clear_pads), (gst_tee_handle_buffer),
(gst_tee_chain):
Be a lot smarter when deciding what srcpad to use for proxying
the buffer_alloc. Also handle pad added/removed when doing so.
Fixes #357959.
Keep track of what pads we already pushed on in case we have pads
added/removed while pushing. Fixes #374639
* tests/check/Makefile.am:
* tests/check/elements/tee.c: (handoff), (GST_START_TEST),
(tee_suite):
Added unit test for pad resync.
2007-07-03 16:26:29 +00:00
Thomas Vander Stichele
f26d1795b9 po/: Updated translations.
Original commit message from CVS:
* po/nl.po:
* po/sv.po:
Updated translations.
2007-07-01 21:31:18 +00:00
Thomas Vander Stichele
5a992c1370 po/: Added new Finnish translation.
Original commit message from CVS:
translation by: Tommi Vainikainen <Tommi.Vainikainen@iki.fi>
* po/LINGUAS:
* po/fi.po:
Added new Finnish translation.
2007-07-01 21:30:09 +00:00
Wim Taymans
45bed69a60 plugins/elements/gstmultiqueue.c: When figuring out when a queue is filled, use our internal time estimate based on s...
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(single_queue_overrun_cb):
When figuring out when a queue is filled, use our internal time estimate
based on segments, just like check_full does.
2007-06-28 11:25:17 +00:00
Jan Schmidt
4b239eb63b Mention bug 430682 closed by previous commit.
Original commit message from CVS:

Mention bug 430682 closed by previous commit.
2007-06-27 11:47:46 +00:00
Stefan Kost
d661fd332c gst/gstminiobject.c: Remove 3 do-nothing methods.
Original commit message from CVS:
* gst/gstminiobject.c: (gst_mini_object_get_type):
Remove 3 do-nothing methods.
2007-06-27 11:43:04 +00:00
Tim Angus
463f0b09f3 plugins/elements/gstcapsfilter.c: Take a reference instead of a copy when setting "caps".
Original commit message from CVS:
Patch by: Tim Angus <tim at ngus dot net>
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_set_property):
Take a reference instead of a copy when setting "caps".
Fix documentation to clarify this behaviour. Fixes #449414.
2007-06-27 11:24:08 +00:00
Stefan Kost
1756e6aa87 gst/: Remove empty instance_init() functions to save relocs and lessen the noise. Remove some of the function prototy...
Original commit message from CVS:
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstplugin.c: (gst_plugin_init):
* gst/gstpluginfeature.c: (gst_plugin_feature_init):
* gst/gstquery.c: (gst_query_get_type):
* gst/gstregistry.c: (gst_registry_init):
* gst/gsturi.c: (gst_uri_handler_base_init):
Remove empty instance_init() functions to save relocs and lessen the
noise. Remove some of the function prototypes that are doubled by
G_DEFINE_TYPE.
2007-06-27 10:12:14 +00:00
Étienne Noreau-Hébert
8aff242e77 gst/gstghostpad.c: Add peer and direction in the XML serialisation of ghostpads.
Original commit message from CVS:
Patch by: Étienne Noreau-Hébert <etienne at deepunder dot org>
* gst/gstghostpad.c: (gst_proxy_pad_save_thyself):
Add peer and direction in the XML serialisation of ghostpads.
Fixes #449226.
2007-06-27 09:34:01 +00:00
Stefan Kost
90f4e13ae7 configure.ac: Preserve useful information, thanks Tim.
Original commit message from CVS:
* configure.ac:
Preserve useful information, thanks Tim.
2007-06-26 16:24:20 +00:00
Jan Schmidt
afebd394fa plugins/elements/gstmultiqueue.*: Take the multiqueue lock when updating the fill level so we don't get confused.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_single_queue_flush), (apply_segment), (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_loop),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_src_activate_push), (wake_up_next_non_linked),
(compute_high_id), (gst_single_queue_new):
* plugins/elements/gstmultiqueue.h:
Take the multiqueue lock when updating the fill level so we don't get
confused.
After applying a buffer or event on the src pad segment, make sure to
call gst_data_queue_limits_changed() to get the data queue to unblock
and check the filled state again.
Rework the not-linked pad handling so the logic is that not-linked
pads can push as fast as they like, but only so they never get
ahead of any linked pads.
* tests/check/elements/multiqueue.c: (mq_sinkpad_to_srcpad),
(mq_dummypad_getcaps), (mq_dummypad_chain), (mq_dummypad_event),
(run_output_order_test), (GST_START_TEST), (multiqueue_suite):
Add a test to check that not-linked pads always stay behind
linked pads.
2007-06-26 14:45:15 +00:00
Jan Schmidt
5c14a4f3d8 docs/random/release: Some updates to the release procedure.
Original commit message from CVS:
* docs/random/release:
Some updates to the release procedure.
2007-06-26 11:57:23 +00:00
Stefan Kost
0aeac41ffd gst/gstelementfactory.c: Microoptimization that saves stunning 80 bytes.
Original commit message from CVS:
* gst/gstelementfactory.c: (__gst_element_details_clear):
Microoptimization that saves stunning 80 bytes.
2007-06-26 08:26:36 +00:00
Stefan Kost
c38d50ed06 docs/plugins/: Update docs with caps info.
Original commit message from CVS:
* docs/plugins/gstreamer-plugins.args:
* docs/plugins/inspect/plugin-coreelements.xml:
* docs/plugins/inspect/plugin-coreindexers.xml:
Update docs with caps info.
2007-06-25 12:35:46 +00:00
Thomas Vander Stichele
961278918e po/it.po: Updated Italian translation.
Original commit message from CVS:
* po/it.po:
Updated Italian translation.
2007-06-23 22:56:28 +00:00
Thomas Vander Stichele
52cee4abee fix win32 arch
Original commit message from CVS:
fix win32 arch
2007-06-23 11:19:16 +00:00
Thomas Vander Stichele
bc93f42cab 80 line fix
Original commit message from CVS:
80 line fix
2007-06-23 11:18:46 +00:00
Thomas Vander Stichele
aefa676451 po/: Update Vietnamese translations.
Original commit message from CVS:
* ChangeLog:
* po/vi.po:
Update Vietnamese translations.
2007-06-23 11:15:11 +00:00
Tim-Philipp Müller
1a87e450ee libs/gst/base/gstbasesink.c: Remove unused signal enum.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
Remove unused signal enum.
2007-06-21 22:37:27 +00:00
Christian Schaller
5fdec7328c update MAINTAINERS file to reflect current realities better
Original commit message from CVS:
update MAINTAINERS file to reflect current realities better
2007-06-21 18:00:58 +00:00
Jan Schmidt
71766af8c2 Beef up and include the docs for gst_type_register_static_full and gst_element_class_set_details_simple and add the A...
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.c:
* gst/gstutils.c: (gst_type_register_static_full):
Beef up and include the docs for gst_type_register_static_full and
gst_element_class_set_details_simple and add the API keyword
in the ChangeLog.
2007-06-21 16:39:01 +00:00
Wim Taymans
a689b50cab plugins/elements/gstmultiqueue.c: Fix setting max-* properties after adding queues.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_set_property),
(update_time_level), (gst_single_queue_push_one),
(gst_multi_queue_chain), (gst_multi_queue_sink_event),
(single_queue_overrun_cb), (single_queue_underrun_cb),
(single_queue_check_full):
Fix setting max-* properties after adding queues.
Use IS_FILLED for checking visible items.
Signal overrun if multiple queues overrun.
Add extra debug output.
Patch by: Wim Taymans <wim@fluendo.com>
2007-06-21 14:35:03 +00:00
Stefan Kost
9eeb1c8e2b Saving relocations for GTypeInfo and GstElementDetails. Fixes #437457.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_set_details_simple):
* gst/gstelement.h:
* gst/gstutils.c: (gst_type_register_static_full):
* gst/gstutils.h:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_base_init):
* plugins/elements/gstfakesink.c: (gst_fake_sink_base_init):
* plugins/elements/gstfakesrc.c: (gst_fake_src_base_init):
* plugins/elements/gstfdsink.c: (gst_fd_sink_base_init):
* plugins/elements/gstfdsrc.c: (gst_fd_src_base_init):
* plugins/elements/gstfilesink.c: (gst_file_sink_base_init):
* plugins/elements/gstfilesrc.c: (gst_file_src_base_init):
* plugins/elements/gstidentity.c: (gst_identity_base_init):
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_base_init):
* plugins/elements/gstqueue.c: (gst_queue_base_init),
(apply_buffer), (gst_queue_chain):
* plugins/elements/gsttee.c: (gst_tee_base_init):
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_base_init),
(gst_type_find_element_class_init):
Saving relocations for GTypeInfo and GstElementDetails. Fixes #437457.
2007-06-21 14:29:05 +00:00
Tim-Philipp Müller
9dd0ba7c8f docs/pwg/advanced-types.xml: Fix typo in iana.org URI.
Original commit message from CVS:
* docs/pwg/advanced-types.xml:
Fix typo in iana.org URI.
2007-06-21 09:46:02 +00:00
Andy Wingo
4e1c9c226a tests/check/pipelines/simple-launch-lines.c
Original commit message from CVS:
2007-06-19  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.

* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
2007-06-19 21:58:30 +00:00
Andy Wingo
b0c2d05640 tests/check/pipelines/simple-launch-lines.c
Original commit message from CVS:
2007-06-19  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): New test, partially disabled until
basesink is fixed.
2007-06-19 21:28:54 +00:00
Wim Taymans
919dfdbfb3 plugins/elements/gstmultiqueue.c: Fix event leak.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(gst_multi_queue_sink_event):
Fix event leak.
2007-06-19 16:05:11 +00:00
Wim Taymans
e599053491 gst/gstbin.c: Move the common code for posting state-change messages into one function.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_push_state_continue),
(bin_handle_async_start), (bin_handle_async_done),
(gst_bin_handle_message_func):
Move the common code for posting state-change messages into
one function.
Broadcast the state signal after we posted the messages.
Mark the bin as busy when it's doing a state-change.
Make sure async-start/done messages don't interfere with the bin's
state when it's busy.
After the state change, let the bin check which elements completed the
state change while it was busy so that it can update its state.
2007-06-19 10:41:33 +00:00
Jan Schmidt
1c0bafd86f docs/random/release: Add a note about updating the doap file to the release checklist
Original commit message from CVS:
* docs/random/release:
Add a note about updating the doap file to the release checklist
2007-06-19 10:38:39 +00:00
Wim Taymans
d6efd96ec4 plugins/elements/gstmultiqueue.c: Make sure we don't reference the buffer/event after we have given away ownership in...
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
Make sure we don't reference the buffer/event after we have given away
ownership in the queue.
2007-06-18 16:44:07 +00:00
Wim Taymans
8fb713783b plugins/elements/gstmultiqueue.c: Update queue state _after_ adding the item in the queue because else we could end u...
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_flush),
(gst_multi_queue_chain), (gst_multi_queue_sink_event):
Update queue state _after_ adding the item in the queue because else we
could end up being full without the element added yet.
2007-06-18 15:15:32 +00:00
Wim Taymans
0b3153873b gst/gstbin.*: Immediatly commit the toplevel bin state when receiving an async-done message. This enables us to avoid...
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_continue_func),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
* gst/gstbin.h:
Immediatly commit the toplevel bin state when receiving an async-done
message. This enables us to avoid spawning a thread to commit the state
in some common cases and it also avoids some races.
Avoid spawning a state thread when adding/removing async elements to a
toplevel bin. Instead we immediatly update the bin state.
Get rid of iterating all the children when getting the state in the bin
because it is now always up-to-date.
Fix bug where locked elements would always return _SUCCESS even it they
returned NO_PREROLL before being locked.
Fix the order of the state_change, async-start/done messages that was
sometimes incorrect.
Mark the state_dirty field as deprecated, we don't need it anymore as we
are always up-to-date.
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_continue_state):
Small debug inprovements.
Return the previous element state return when nothing is pending instead
of blindly returning SUCCESS.
* tests/check/generic/sinks.c: (GST_START_TEST), (pad_blocked_cb),
(gst_sinks_suite):
Add a whole bunch of new testcases.
2007-06-18 15:12:28 +00:00
Thomas Vander Stichele
43efcf4222 po/: Update translations.
Original commit message from CVS:
* po/uk.po:
* po/vi.po:
Update translations.
2007-06-17 17:26:48 +00:00
Jan Schmidt
ba9acc9b57 gst/gstpad.c: Fix typo in the docs.
Original commit message from CVS:
* gst/gstpad.c:
Fix typo in the docs.
2007-06-15 14:37:28 +00:00
Wim Taymans
864d257e83 docs/libs/gstreamer-libs-sections.txt: Add docs for new methods.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Add docs for new methods.
2007-06-15 11:49:24 +00:00
Wim Taymans
b0801cc962 plugins/elements/gstmultiqueue.c: Don't use GSlice because we don't depend on >= 2.10 yet.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_item_destroy),
(gst_multi_queue_item_new):
Don't use GSlice because we don't depend on >= 2.10 yet.
2007-06-15 11:35:22 +00:00
Wim Taymans
7eeb31033d plugins/elements/gstmultiqueue.c: Remove debug printf.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_flush),
(update_time_level), (apply_segment), (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_sink_activate_push),
(gst_multi_queue_sink_event), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full):
Remove debug printf.
2007-06-15 11:09:38 +00:00