Most signal processing texts, including MATLAB, use the following convention for IIR filter coefficients:
a_0 y[n] + a_1 y[n-1] + ... + a_M y[n-M] = b_0 x[n] + b_1 x[n-1] + ... + b[N] x[n-N]
Usually, a_0 is set to 1 because the coefficients can always be rescaled, giving
y[n] = b_0 x[n] + b_1 x[n-1] + ... + b[N] x[n-N] - a_1 y[n-1] - ... - a_M y[n-M]
The convention that was previously used by audiofxbaseiirfilter and derived class had the a and b coefficients swapped, and did not have the minus signs.
This change makes the audiofx plugin use the more common convention described above.
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
Currently this only works if the kernel size doesn't change, in the future
it will be possible to change the kernel size too without draining
the complete history and without loosing anything.
Partially based on a patch by
Thiago Santos <thiago.sousa.santos@collabora.co.uk>
When nsamples_out is larger than nsamples_in, using unsigned
ints lead to a overflow and the resulting value is wrong and
way too large for allocating a buffer. Use signed integers
and returning immediatelly when that happens.
This provides another 7% speedup for the time domain convolution and 1.5%
speedup for the FFT convolution on Mono input.
This optimization assumes that the compiler simplifies calculations
and conditions on constant numbers and unrolls loops with a constant
number of repeats.
This will always use time-domain convolution, which lowers the latency.
With FFT convolution it's always a multiple of the kernel length,
with time domain convolution it's only the pre-latency of the filter kernel.
This provides a great speedup, especially the relationship between kernel
length and processing size is now logarithmic instead of linear. Below a
kernel size of 32 it's a bit slower, afterwards it's much faster:
17 0.788000 -> 0.950000
33 1.208000 -> 1.146000
65 2.166000 -> 1.146000
...
4097 107.444000 -> 1.508000
For sizes smaller 32 the normal time-domain convolution is chosen,
for larger sizes the FFT convolution is automatically used.
Fixes bug #594381.
Remove some redundant calculations, move comparisions out of
inner loops, etc.
This makes the convolution about 3 (!) times faster but
processing time is of course still proportional to the
filter size.
The previous patch to add support for additional sample formats possibly
introduced a reentrancy bug: a variable used for a loop index was declared
static. This patch fixes that, and also adds a "/* *INDENT-ON* */" annotation
following the macro block. (I don't know what the annotation is for, but the
adder, where I copied this from, has it).
Introduce a new max-delay property that can only
be set before going to PLAYING or PAUSED. This
is used to limit the maximum delay and is set
to the current delay by default.
Using this will make sure that we have enough data
in our internal ringbuffer for the echo. With dynamic
reallocation of the ringbuffer as used before silence
could've been used as the echo directly after setting
a new delay.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Save some allocations if the echo delay is increased often
during playback by always allocating enough memory to hold
data up to the next complete second, i.e. in the worst case
allocate memory for one additional second.
Add a note to the docs that audioecho's reverb will
sound metallic. This happens because for a real
reverb filter additional filtering is necessary.
Also note which values should be used for the delay
property to get an echo effect.
The element can add an echo and a simple reverb effect to
an audio stream but for a real reverb filter it would need
some additional filtering to prevent a metallic-sounding
result.
Original commit message from CVS:
* gst/audiofx/audiochebband.c: (gst_audio_cheb_band_class_init),
(gst_audio_cheb_band_init), (gst_audio_cheb_band_finalize),
(gst_audio_cheb_band_set_property):
* gst/audiofx/audiochebband.h:
* gst/audiofx/audiocheblimit.c: (gst_audio_cheb_limit_class_init),
(gst_audio_cheb_limit_init), (gst_audio_cheb_limit_finalize),
(gst_audio_cheb_limit_set_property):
* gst/audiofx/audiocheblimit.h:
* gst/audiofx/audiowsincband.c: (gst_audio_wsincband_class_init),
(gst_audio_wsincband_init), (gst_audio_wsincband_finalize),
(gst_audio_wsincband_set_property):
* gst/audiofx/audiowsincband.h:
* gst/audiofx/audiowsinclimit.c: (gst_audio_wsinclimit_class_init),
(gst_audio_wsinclimit_init), (gst_audio_wsinclimit_finalize),
(gst_audio_wsinclimit_set_property):
* gst/audiofx/audiowsinclimit.h:
Use a custom mutex for protecting the instance fields instead of
the GstObject lock. Using the latter can lead to deadlocks, especially
with the FIR filters when updating the latency.
Original commit message from CVS:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofxbasefirfilter.c:
(gst_audio_fx_base_fir_filter_dispose),
(gst_audio_fx_base_fir_filter_base_init),
(gst_audio_fx_base_fir_filter_class_init),
(gst_audio_fx_base_fir_filter_init),
(gst_audio_fx_base_fir_filter_push_residue),
(gst_audio_fx_base_fir_filter_setup),
(gst_audio_fx_base_fir_filter_transform),
(gst_audio_fx_base_fir_filter_start),
(gst_audio_fx_base_fir_filter_stop),
(gst_audio_fx_base_fir_filter_query),
(gst_audio_fx_base_fir_filter_query_type),
(gst_audio_fx_base_fir_filter_event),
(gst_audio_fx_base_fir_filter_set_kernel):
* gst/audiofx/audiofxbasefirfilter.h:
* gst/audiofx/audiofxbaseiirfilter.c:
Implement a base class for generic audio FIR filters.
* gst/audiofx/audiowsincband.c:
(gst_gst_audio_wsincband_mode_get_type),
(gst_gst_audio_wsincband_window_get_type),
(gst_audio_wsincband_base_init), (gst_audio_wsincband_class_init),
(gst_audio_wsincband_init), (gst_audio_wsincband_build_kernel),
(gst_audio_wsincband_setup), (gst_audio_wsincband_set_property),
(gst_audio_wsincband_get_property):
* gst/audiofx/audiowsincband.h:
* gst/audiofx/audiowsinclimit.c:
(gst_audio_wsinclimit_mode_get_type),
(gst_audio_wsinclimit_window_get_type),
(gst_audio_wsinclimit_base_init),
(gst_audio_wsinclimit_class_init), (gst_audio_wsinclimit_init),
(gst_audio_wsinclimit_build_kernel), (gst_audio_wsinclimit_setup),
(gst_audio_wsinclimit_set_property),
(gst_audio_wsinclimit_get_property):
* gst/audiofx/audiowsinclimit.h:
* tests/check/elements/audiowsincband.c: (GST_START_TEST):
* tests/check/elements/audiowsinclimit.c: (GST_START_TEST):
Use this new base class for audiowsincband and audiowsinclimit.
Also cleanup both elements.
Original commit message from CVS:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofxbaseiirfilter.c:
(gst_audio_fx_base_iir_filter_base_init),
(gst_audio_fx_base_iir_filter_dispose),
(gst_audio_fx_base_iir_filter_class_init),
(gst_audio_fx_base_iir_filter_init),
(gst_audio_fx_base_iir_filter_calculate_gain),
(gst_audio_fx_base_iir_filter_set_coefficients),
(gst_audio_fx_base_iir_filter_setup), (process),
(gst_audio_fx_base_iir_filter_transform_ip),
(gst_audio_fx_base_iir_filter_stop):
* gst/audiofx/audiofxbaseiirfilter.h:
Implement a base class for IIR filters.
* gst/audiofx/audiochebband.c: (gst_audio_cheb_band_base_init),
(gst_audio_cheb_band_class_init), (gst_audio_cheb_band_init),
(generate_coefficients), (gst_audio_cheb_band_set_property),
(gst_audio_cheb_band_setup):
* gst/audiofx/audiochebband.h:
* gst/audiofx/audiocheblimit.c: (gst_audio_cheb_limit_base_init),
(gst_audio_cheb_limit_class_init), (gst_audio_cheb_limit_init),
(generate_coefficients), (gst_audio_cheb_limit_set_property),
(gst_audio_cheb_limit_setup):
* gst/audiofx/audiocheblimit.h:
Use the IIR filter base class for the chebyshev filters.
Original commit message from CVS:
* gst/audiofx/audiowsincband.c:
* gst/audiofx/audiowsinclimit.c:
* gst/cutter/gstcutter.c:
Make author name consistent with others.
Original commit message from CVS:
* configure.ac:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiochebband.c:
* gst/audiofx/audiocheblimit.c:
* gst/audiofx/math_compat.h:
Check for sinh(), cosh() and asinh() and define our own
implementations if they're not available. Fixes bug #520880.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofx.c:
* gst/audiofx/audiowsincband.c:
* gst/audiofx/audiowsincband.h:
* gst/audiofx/audiowsinclimit.c:
* gst/audiofx/audiowsinclimit.h:
* tests/check/Makefile.am:
* tests/check/elements/audiowsincband.c:
* tests/check/elements/audiowsinclimit.c:
Move the lpwsinc and bpwsinc elements from gst-plugins-bad into
the audiofx plugin, and rename to audiowsinclimit and audiowsincband
respectively.
Fixes: #467666
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init):
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init):
Don't implement get_unit_size() ourselves, the GstAudioFilter base
class already does this for us.
Original commit message from CVS:
* configure.ac:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_init), (gst_audio_amplify_transform_ip):
* gst/audiofx/audiodynamic.c: (gst_audio_dynamic_init),
(gst_audio_dynamic_transform_ip):
* gst/audiofx/audioinvert.c: (gst_audio_invert_init),
(gst_audio_invert_transform_ip):
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_init),
(gst_audio_panorama_transform):
* gst/level/gstlevel.c: (gst_level_init):
Make elements GST_BUFFER_FLAG_GAP aware and call
gst_base_transform_set_gap_aware for this.
Bump core requirement to CVS.
* gst/audiofx/audiochebyshevfreqband.c:
(gst_audio_chebyshev_freq_band_transform_ip):
* gst/audiofx/audiochebyshevfreqlimit.c:
(gst_audio_chebyshev_freq_limit_transform_ip):
Also sync GObject properties to the controller if operating
in passthrough mode.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
The transform() methods are not called in passthrough mode so
there's no need for checking if the element is in passthrough mode.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
Sync the GObject properties with the controller even in passthrough
mode to get consistent property values.
