If it looks like we would be allocating a silly size for our sample
index, just bail out instead of trying to allocate it. Helps with
broken or fuzzed files where we might end up trying to malloc a
couple of hundred MBs otherwise.
Make sure we don't read beyond the atom boundary. Note that the code
behaves slightly differently in the corner case where there is not
enough atom data for the specified number of samples (n_samples_time)
in the atom, but still enough data to fill the pre-allocated index of
n_samples entries: before we would just stop parsing the stts data
and continue, whereas now we will likely error out. This should not
be a problem in practice though. We could maintain the old behaviour
by doing reads with a size check inside the loop if needed.
Use GstByteReader to parse stsz and stsc chunks, and check size of
available data before parsing it, instead of blindly assuming there
will be enough data. Fixes crashes with some fuzzed/broken files.
At the end, Dirac streams have an EOS packet with 0 length.
Don't ever sit in an infinite loop when processing one. Allows
muxing Dirac into mkv to complete successfully.
Add a property to allow control over what event causes a file
to finish being written and a new file start. The default is
the same as before -- each buffer causes a new file to be
written. Added is a case where buffers are written to the
same file until a discontinuity in the stream.
Add a parameter 'ignore-pt' that disables creating a gstrtpptdemux module and
ghosts the pads of gstrtpjitterbuffer instead of the ones of gstrtpptdemux.
Fixes#594490
When we receive a reordered packet with the same timestamp as the previous one
(which can happen for fragmented packets) don't consider the packet as lost but
instead wait for the reordered packet to arrive.
Switch the warning-level, so that a reordering does not get a warning, only
an actual produced lost-packet.
Fixes#594251
In gst_rtspsrc_parse_digest_challenge(), rtspsrc does a g_strndup of the auth
header items and then passes them to gst_rtsp_connection_set_auth_param()
without freeing.
Fixes#594133
When receiving a sync-packet, all sessions with the same cname will be compared
and synced together. In this process, there could still be references to a
session that has been shut down in the meanwhile.
This patch makes sure that these references are removed when shutting down a
session, so that the syncing can be done safely.
Fixes#594283
The priv->clock_rate variable could become -1 between when its checked to not
be -1 and when its used, causing an assertion. Fixed by taking the mutex
earlier in the chain() function.
Fixes#593955
This reintroduces the fix for bug #593391. It also applies it in
gst_rtp_session_sync_rtcp() which has very similar code to
gst_rtp_session_send_rtcp().
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.
Fixes#593354
Recent changes in gst-plugins-good/gst/effectv prevents it from being compiled
with gcc 3. The problem is that the new code uses preprocessor conditionals
within a macro call which does not work with older versions of gcc.
Fixes bug #593688.
In case of non-interleaved (= sequentially payloaded) streams,
the AU-Index serves little purpose (that is not already covered by
RTP fields). (Broken) Payloaders might consider this field then
to be disregarded and have non spec compliant values, e.g. each
RTP packet having AU-Index 2 (rather than 0). As such, ensure/force
simple sequential sending of non-interleaved streams.
3GPP specs define a number of tags along with precise layout. While these
are normally expected to be found in a container whose major brand is a
3GPP brand, this may also happen when a 3GPP brand is only mentioned as a
compatible brand. Apply some checks, heuristic and fallbacks to extract
such tags as well.
Handle large, invalid or otherwise unusual chunk sizes.
Verify some chunk sizes to be at least the size they are
expected to be and round up some sizes to even number for
e.g. offset administration, which must also be properly
tracked in push mode.
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes#561752
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.
See #561752
We usually only get SR packets in our chain function but if an invalid packet
contains the SR packet after the RR packet, we must not fail but simply ignore
the malformed packet.
Fixes#581375
Since neither rtpmanager nor any of the payloaders properly implement
pad allocation, there is no way for the rtpmanager to inform downstream elements
of the new SSRC if there is an SSRC collision. So the warning is emitted all the
time and it is confusing.
Fixes#580144
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
When the number of participants is less than 50, the RFC allows for sending the
BYE packet immediatly instead of using the regular BYE timeout.
Fixes#567828.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_setcaps_send_rtp), (create_send_rtp_sink):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
When an SSRC is found on the caps of the sender RTP, use this as the
internal SSRC. Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_getcaps_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_schedule_bye_locked), (rtp_session_schedule_bye):
* gst/rtpmanager/rtpsession.h:
Rename a method to better reflect what it really does.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp):
Use method to get the internal SSRC.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_set_property), (rtp_session_get_property):
Add property to congiure the internal SSRC of the session.
Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
Only change the SSRC of the session and reset the internal source when
the SSRC actually changed. See #565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate):
* gst/rtpmanager/rtpsource.h:
When no payload was specified on the caps but there was a clock-rate,
assume the clock-rate corresponds to the first payload type found in the
RTP packets. Fixes#565509.
Original commit message from CVS:
Patch by: Arnout Vandecappelle <arnout at mind dot be>
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last outgoing timestamp and of the last sender-side
time. Timestamps can only go forward if they do at the sender
side, can only go back if they do at the sender side, and remain the
same if they remain the same at the sender side. Fixes#565319.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (obtain_source),
(rtp_session_create_source), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye):
Make obtain_source return an aditional ref so that we don't lose our ref
to it when a session cleanup occurs when we are emiting a signal.
Emit the on_new_ssrc signal for the CSRC, not the SSRC.
Fixes#562319.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_reset_sync),
(gst_rtp_bin_clear_pt_map):
Reset the sync parameters when clearing the payload type map too.
Fixes#562312.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (get_client),
(gst_rtp_bin_reset_sync), (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream),
(gst_rtp_bin_class_init), (new_ssrc_pad_found):
* gst/rtpmanager/gstrtpbin.h:
Remove a lot of per stream state that is not needed and pass new info in
the method call.
Add signal to reset sync parameters.
Avoid parsing the caps to get a clock_base, we get this from the sync
signal now.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_set_property),
(rtp_session_get_property):
Add property to configure the RTCP MTU.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(copy_source), (rtp_session_create_sources),
(rtp_session_get_property):
Add G_PARAM_STATIC_STRINGS.
Add property to return a GValueArray of all known RTPSources in the
session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_create_sdes), (rtp_source_set_property),
(rtp_source_get_property):
Remove properties to set the various SDES items, an application is never
supposed to change the RTPSource data.
Change the SDES getter properties to one SDES property that returns all
SDES items in a GstStructure.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_release_pad):
Release the right pads on rtpbin. Fixes#561752.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (get_current_times),
(rtcp_thread), (gst_rtp_session_chain_recv_rtp):
Pass the running time to the session when processing RTP packets.
Improve the time function to provide more info.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (update_arrival_stats),
(rtp_session_process_rtp), (rtp_session_process_sdes),
(rtp_session_process_rtcp), (session_start_rtcp),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Mark the internal source with a flag.
Use running_time instead of the more useless timestamp.
Validate a source when a valid SDES has been received.
Pass the current system time when processing SR packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_create_stats),
(rtp_source_get_property), (rtp_source_send_rtp),
(rtp_source_process_rb), (rtp_source_get_new_rb),
(rtp_source_get_last_rb):
* gst/rtpmanager/rtpsource.h:
Add property to get source stats.
Mark params as STATIC_STRINGS.
Calculate the bitrate at the sender SSRC.
Avoid negative values in the round trip time calculations.
* gst/rtpmanager/rtpstats.h:
Update some docs and change some variable name to more closely reflect
what it contains.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain_rtcp):
Initialize return value to fix compiler warning about uninitialized
variable.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream), (free_stream),
(new_ssrc_pad_found):
Remove internal sync pad, use signals instead to get lip-sync
notifications.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_base_init),
(gst_rtp_jitter_buffer_class_init),
(gst_rtp_jitter_buffer_internal_links), (create_rtcp_sink),
(remove_rtcp_sink), (gst_rtp_jitter_buffer_request_new_pad),
(gst_rtp_jitter_buffer_release_pad),
(gst_rtp_jitter_buffer_sink_rtcp_event),
(gst_rtp_jitter_buffer_chain_rtcp),
(gst_rtp_jitter_buffer_get_property):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Make it possible to send SR packets to the jitterbuffer.
Check if the SR timestamps are valid by comparing them to the RTP
timestamps.
Signal the SR packet and the timing information to listeners.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_rtcp_chain), (gst_rtp_ssrc_demux_src_query):
Remove some unused code.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last seen RTP timestamp so that we can filter out
invalid SR packets.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Fix GST_DEBUG call to only have as many arguments as required
by the format string. Fixes a compiler warning.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (create_stream), (new_ssrc_pad_found):
Do not try to keep track of the clock-rate ourselves but simply get the
value from the jitterbuffer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add some debug info.
Pass the clock-rate to the jitterbuffer.
Also pass the clock-rate along with the rtp timestamp when getting the
sync parameters.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
Fix some debug.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of clock-rate changes and return the clock-rate together with
the rtp timestamps used for sync.
Don't try to construct timestamps when we have no base_time.
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Request a new clock-rate when the payload type changes.
Reset the jitter calculation when the clock-rate changes.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
Small cleanups and some more debug info.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
Also configure the next expected output seqnum when we get a seqnum-base
on the caps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix problem with using the output seqnum counter to check for input
seqnum discontinuities.
Improve gap detection and recovery, reset and flush the jitterbuffer on
seqnum restart. Fixes#556520.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_insert):
Fix wrong G_LIKELY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtcp_src), (create_send_rtcp_src):
Install event handler on the rtcp_src pad, make LATENCY event return
TRUE.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin-marshal.list:
Add marshaller for new action signal.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_internal_session),
(gst_rtp_bin_class_init):
* gst/rtpmanager/gstrtpbin.h:
Add action signal to retrieve the internal RTPSession object.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_get_property), (gst_rtp_session_release_pad):
Add property to access the internal RTPSession object.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(check_collision):
* gst/rtpmanager/rtpsession.h:
Add action signal to retrieve an RTPSource object by SSRC.
See #555396.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps):
Only update the seqnum-base when it was not already configured for the
streams.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_ssrc_active), (on_ssrc_sdes),
(on_bye_ssrc), (on_bye_timeout), (on_timeout), (on_sender_timeout):
Ref the rtpsource object before we release the session lock when we emit
the signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain):
Do not try to adjust the offset of streams for which we have not yet
seen an SR packet. Avoids large ts-offsets in some cases.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_send_rtcp),
(gst_rtp_session_event_send_rtp_sink):
Send EOS when the session object instructs us to.
* gst/rtpmanager/rtpsession.c: (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible for the session manager to instruct us to send EOS. We
currently will EOS when the session is a sender and when the sender part
goes EOS. This is not entirely correct behaviour because the session
could still participate as a receiver.
Fixes#549409.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (new_ssrc_pad_found):
Reset rtp timestamp interpollation when we detect a gap when the
clock_base changed.
Don't try to adjust the ts-offset when it's too big (> 3seconds)
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_set_ssrc):
* gst/rtpmanager/gstrtpsession.h:
Add method to set session SSRC.
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_set_internal_ssrc), (rtp_session_get_internal_ssrc),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Added debugging for the collision checks.
Add method to change the internal SSRC of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Reset the clock base when we detect large jumps in the seqnums.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
Print the pad-name in debug log.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
Use "-" instead of "_" in property names. Can we call them just
"device" like everywhere else?
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Make the buffer metadata writable before inserting it in the
jitterbuffer because the jitterbuffer will modify the timestamps.
* gst/rtpmanager/rtpjitterbuffer.c:
Update method comment about requiring writable metadata on buffers.
* gst/rtpmanager/rtpsession.c: (rtp_session_process_sr),
(rtp_session_process_rtcp):
Make the RTCP buffer metadata writable because we want to modify the
metadata.
Fixes#546312.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Fix debug by logging the right seqnum.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (get_pt_map):
Release lock before emitting the request-pt-map signal.
Fixes#543480.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (gst_rtp_session_send_rtcp),
(gst_rtp_session_sync_rtcp), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_chain_recv_rtcp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_send_rtp):
* gst/rtpmanager/rtpsource.c: (push_packet), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp):
Changed some GST_DEBUG() to GST_LOG() to reduce the spam when a
pipeline is running normally.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rtcp), (rtp_session_send_rtp),
(rtp_session_send_bye_locked), (rtp_session_send_bye),
(rtp_session_next_timeout), (session_report_blocks), (session_cleanup),
(is_rtcp_time), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Do not mix the use of g_get_current_time() with gst_clock_get_time().
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_init),
(gst_rtp_bin_finalize), (gst_rtp_bin_change_state):
Fix deadlock when shutting down, use a new lock instead to properly
shutdown.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_change_state), (new_payload_found),
(new_ssrc_pad_found):
Break out of callbacks when we are shutting down.
Make sure no state changes can happen when we reconfigure.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
When checking the seqnum, reset the jitterbuffer if the gap is too big,
we need to do this so that we can better handle a restarted source.
Fix some comments.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
Tweak the skew resync diff.
Use our working seqnum compare function in -base.
Rework the jitterbuffer insert code to make it clearer and more
performant by only retrieving the seqnum of the input buffer once and by
adding some G_LIKELY compiler hints.
Improve debugging for duplicate packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Fix a comment, we don't do skew correction here..
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_set_property):
Propagate the do-lost and latency properties to the jitterbuffers when
they are changed on rtpbin.
Original commit message from CVS:
* docs/Makefile.am:
Don't attempt to build plugin docs when they're disabled.
* gst/bayer/Makefile.am:
Add libgstvideo to the link.
* gst/rtpmanager/Makefile.am:
Fix link order, and move LIBS things to _LIBS
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Simply drop bad RTP packets with a warning instead of just posting an
error and stopping. This is a perfectly recoverable event and we don't
force people to use an rtpbin to filter out bad packets first.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Avoid waiting for a negative (huge) duration when the last packet has a
lower timestamp than the current packet.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_query_send_rtcp_src):
Make sure to unref the rtpsession returned by gst_pad_get_parent() to
prevent a memory leak.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Initialise with GST_CLOCK_TIME_NONE to avoid compiler warning.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_finalize):
Make sure to unref the caps used by RTPSource to prevent a memory leak.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/rtpsession.c: (source_clock_rate),
(rtp_session_process_bye), (rtp_session_send_bye_locked):
Unlock the session lock when calling one of our callbacks.
Fixes#532011.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_stream), (gst_rtp_bin_init),
(gst_rtp_bin_set_property), (gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Expose new jitterbuffer property in rtpbin too.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init), (gst_rtp_jitter_buffer_init),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Disable sending out rtp packet lost events by default and make a
property to enabe it. We will likely enable it by default when the base
depayloaders have a default handler for them so that we don't send these
events all through the pipeline for now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_src_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Remove private version of a function that is in -base now.
Add src event handler.
Rework the jitterbuffer pushing loop so that it can quickly react to
lost packets and instruct the depayloader of them. This can then be used
to implement error concealment data.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_query_send_rtcp_src), (create_recv_rtcp_sink),
(create_send_rtcp_src):
Set up some internal links functions for the RTCP and sync pads because
the defaults are really not correct.
Implement a query handler for the RTCP src pad, mostly to correctly
report about the latency.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain):
* gst/rtpmanager/rtpsession.c: (update_arrival_stats),
(rtp_session_process_sr), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Also keep track of the first buffer timestamp together with the first
RTP timestamp as they both are needed to construct the timing of
outgoing packets in the jitterbuffer and are therefore also needed to
manage lip-sync. This fixes lip-sync if the first RTP packets arrive
with a wildly different gap.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_session):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_finalize):
Avoid leaking pads in the RTP manager.
Original commit message from CVS:
Based on patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(rtcp_thread), (start_rtcp_thread), (stop_rtcp_thread),
(join_rtcp_thread), (gst_rtp_session_change_state):
Avoid a deadlock when joining the RTCP thread in PAUSED because it might
be blocked downstream. Also avoid spawning multiple rtcp threads.
Fixes#520894.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic@users.sf.net>
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Don't try to reset the clock skew when we have no timestamps.
Fixes#519005.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate):
Ignore streams that did not receive an SR packet when doing
synchronisation. Fixes#516160.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir at gmail dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Try to get the new clock-rate from the buffer caps when we receive a new
payload type instead of always firing the signal. Fixes#512774.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(create_stream), (payload_type_change), (new_ssrc_pad_found):
Also handle lip-sync when the clock-rate is not provided with caps but
with a signal.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the fixed clock-rate from the jitterbuffer and extend it so that
a clock-rate can be provided with each buffer instead. Fixes#511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_change_state),
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Remove old unused variable.
Track pt on input buffers and get the clock-rate when it changes.
Ignore packets with unknown clock-rate. See #511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/rtpsource.c: Fix unref of buffer using the
wrong function. Fixes#511920
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_next_timeout),
When reconsidering RTCP timeouts, set the next timeout against the last
report time instead of the current clock time so that we don't end up
reconsidering forever.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Only peek at the tail element instead of popping it off, which allows
us to greatly simplify things when the tail element changes.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_recv_rtp_sink):
* gst/rtpmanager/gstrtpssrcdemux.c:
(gst_rtp_ssrc_demux_sink_event):
Forward FLUSH events instead of leaking them.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the tail-changed callback in favour of a simple boolean when we
insert a buffer in the queue.
Add method to peek the tail of the buffer.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (apply_offset),
(gst_rtp_jitter_buffer_loop):
Remove some old unused variables.
Don't add the latency to the skew corrected timestamp, latency is only
used to sync against the clock.
Improve debugging.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_reset_skew), (calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Handle case where server timestamp goes backwards or wildly jumps by
temporarily pausing the skew correction.
Improve debugging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_client):
Fix crasher in dispose.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Handle cases where input buffers have no timestamps so that no clock
skew can be calculated, in this case interpollate timestamps based on
rtp timestamp and assume a 0 clock skew.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c: (apply_latency),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query):
Remove jitter correction code, it's now in the lower level object.
Use new -core method for doing a peer query.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Move jitter correction to the lowlevel jitterbuffer.
Increase the max window size.
When filling the window, already start estimating the skew using a
parabolic weighting factor so that we have a much better startup
behaviour that gets more accurate with the more samples we have.
Increase the default weighting factor for the steady state to get
smoother timestamps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_dispose),
(gst_rtp_bin_finalize):
Fix cleanup crasher.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Dynamically adjust the skew calculation window so that we calculate it
over a period of around 2 seconds.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (calc_ntp_ns_base),
(gst_rtp_bin_change_state), (new_payload_found), (create_send_rtp):
Calculate and configure the NTP base time so that we can generate better
NTP times in SR packets.
Set caps on new ghostpad.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Clean debug statement.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_internal_links), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Add ntp-ns-base property to convert running_time to NTP time.
Handle NEWSEGMENT events on send and recv RTP pads so that we can
calculate the running time and thus NTP time of the packets.
Simplify getting the current NTP time using the pipeline clock.
Implement internal links functions.
Use the buffer timestamp to calculate the NTP time instead of the clock.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_chain), (gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links),
(gst_rtp_ssrc_demux_src_query):
* gst/rtpmanager/gstrtpssrcdemux.h:
Implement internal links function.
Calculate the diff between different streams, this might be used later
to get the inter stream latency.
* gst/rtpmanager/rtpsession.c: (rtp_session_send_rtp):
Simple cleanup.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp), (rtp_source_get_new_sr):
Make the clock skew window a little bigger.
Apply the clock skew to all buffers, not just one with a new timestamp.
Calculate and debug sender clock drift.
Use extended last timestamp to interpollate for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_client),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain), (create_stream),
(gst_rtp_bin_init), (caps_changed), (new_ssrc_pad_found),
(create_recv_rtp), (create_recv_rtcp), (create_send_rtp):
* gst/rtpmanager/gstrtpbin.h:
Updated example pipelines in docs.
Handle sync_rtcp buffers from the SSRC demuxer to perform lip-sync.
Set the default latency correctly.
Add some more points where we can get caps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Add ts-offset property to control timestamping.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_send_rtcp), (gst_rtp_session_sync_rtcp),
(gst_rtp_session_cache_caps), (gst_rtp_session_clock_rate),
(gst_rtp_session_sink_setcaps), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Various cleanups.
Feed rtpsession manager with NTP time based on pipeline clock when
handling RTP packets and RTCP timeouts.
Perform all RTCP with the system clock.
Set caps on RTCP outgoing buffers.
* gst/rtpmanager/gstrtpssrcdemux.c: (find_demux_pad_for_ssrc),
(create_demux_pad_for_ssrc), (gst_rtp_ssrc_demux_base_init),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain):
* gst/rtpmanager/gstrtpssrcdemux.h:
Also demux RTCP messages.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rb), (rtp_session_process_sr),
(rtp_session_process_rr), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_send_bye),
(session_start_rtcp), (session_report_blocks), (session_cleanup),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Remove the get_time callback, the GStreamer part will feed us with
enough timing information.
Split sync timing and RTCP timing information.
Factor out common RB handling for SR and RR.
Send out SR RTCP packets for lip-sync.
Move SR and RR packet info generation to the source.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp),
(rtp_source_process_sr), (rtp_source_process_rb),
(rtp_source_get_new_sr), (rtp_source_get_new_rb),
(rtp_source_get_last_sr):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Use caps on incomming buffers to get timing information when they are
there.
Calculate clock scew of the receiver compared to the sender and adjust
the rtp timestamps.
Calculate the round trip in sources.
Do SR and RR calculations in the source.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop):
Use extended timestamp to release buffers from the jitterbuffer so that
we can handle the rtp wraparound correctly.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Improve Comments.
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state), (gst_rtp_session_parse_caps),
(gst_rtp_session_clock_rate), (gst_rtp_session_sink_setcaps),
(gst_rtp_session_event_send_rtp_sink), (create_recv_rtp_sink),
(create_send_rtp_sink):
Also parse the sink caps for clock-rate instead of only relying on the
result of the signal.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Make sure we fetch the clock rate for payloads we are sending out so
that we can use it for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state),
(gst_rtp_session_event_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Distribute synchronisation parameters to the session manager so that it
can generate correct SR packets for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_base_time),
(rtp_session_set_timestamp_sync), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Add methods for setting sync parameters.
Set correct RTP time in SR packets using the sync params.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Record last RTP <-> GST timestamp so that we can use them to convert NTP
to RTP timestamps in SR packets.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_clear_pt_map):
Add some more advanced example pipelines.
* gst/rtpmanager/gstrtpsession.c: (rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_send_rtcp):
Add some debug and FIXME.
Release LOCK when performing session cleanup.
* gst/rtpmanager/rtpsession.c: (session_report_blocks):
Add some debug.
* gst/rtpmanager/rtpsource.c: (calculate_jitter),
(rtp_source_send_rtp):
Make sure we always send RTP packets with the session SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query):
When synchronizing buffers, take peer latency into account.
Don't try to add our latency to invalid peer max latency values.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.signals:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpclient.h:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpptdemux.h:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpsession.h:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/rtpmanager/gstrtpssrcdemux.h:
Rename all GstRTPFoo structs to GstRtpFoo so that GST_BOILERPLATE
registers a GType that's different than the GstRTPFoo types that
farsight registers (luckily GType names are case sensitive). Should
finally fix#430664.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_set_property):
When drop-on-latency is set but we have no latency configured, just push
the buffer as fast as possible.
Fix typo in comment.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_sink_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix EOS handling.
Convert some DEBUG into WARNINGs.
Pause task when flushing.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(rtcp_thread), (gst_rtp_session_event_recv_rtcp_sink):
Use system clock for RTCP session management timeouts.
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_bye_ssrc), (on_bye_timeout), (on_timeout):
Release the session lock when emiting signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
Add some debug info.
* gst/rtpmanager/rtpsession.c: (rtp_session_init),
(rtp_session_send_rtp):
Store real user name in the session.
Original commit message from CVS:
* gst/rtpmanager/async_jitter_queue.c: (signal_waiting_threads),
(async_jitter_queue_pop_intern_unlocked):
Fix the case where the buffer underruns and does not block.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_base_init),
(create_recv_rtcp), (create_send_rtp), (create_rtcp),
(gst_rtp_bin_request_new_pad):
Rename RTCP send pad, like in the session manager.
Allow getting an RTCP pad for receiving even if we don't receive RTP.
fix handling of send_rtp_src pad.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
When no pt map could be found, fall back to the sinkpad caps.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Fix pad names.
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_create_source), (rtp_session_process_sr),
(rtp_session_send_rtp), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Unlock session when performing a callback.
Add callbacks for the internal session object.
Fix sending of RTP packets.
first attempt at adding NTP times in the SR packets.
Small debug and doc improvements.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Update stats for SR reports.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst/rtpmanager/gstrtpbin.c: (create_stream),
(gst_rtp_bin_class_init), (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Make default jitterbuffer latency configurable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Debuging cleanups.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_finalize):
Don't use GLib-2.10 API, we only require GLib 2.8 at the moment.
Original commit message from CVS:
* configure.ac:
Disable rtpmanager for now because it depends on CVS -base.
* gst/rtpmanager/Makefile.am:
Added new files for session manager.
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(create_stream), (pt_map_requested), (new_ssrc_pad_found):
Some cleanups.
the session manager can now also request a pt-map.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_base_init),
(gst_rtp_session_class_init), (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread), (start_rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_process_rtp), (gst_rtp_session_send_rtp),
(gst_rtp_session_send_rtcp), (gst_rtp_session_clock_rate),
(gst_rtp_session_get_time), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_recv_rtcp_sink),
(gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_send_rtcp_src),
(gst_rtp_session_request_new_pad):
* gst/rtpmanager/gstrtpsession.h:
We can ask for pt-map now too when the session manager needs it.
Hook up to the new session manager, implement the needed callbacks for
pushing data, getting clock time and requesting clock-rates.
Rename rtcp_src to send_rtcp_src to make it clear that this RTCP is to
be send to clients.
Add code to start and stop the thread that will schedule RTCP through
the session manager.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_new_ssrc), (on_ssrc_collision), (on_ssrc_validated),
(on_bye_ssrc), (rtp_session_new), (rtp_session_set_callbacks),
(rtp_session_set_bandwidth), (rtp_session_get_bandwidth),
(rtp_session_set_rtcp_bandwidth), (rtp_session_get_rtcp_bandwidth),
(source_push_rtp), (source_clock_rate), (check_collision),
(obtain_source), (rtp_session_add_source),
(rtp_session_get_num_sources),
(rtp_session_get_num_active_sources),
(rtp_session_get_source_by_ssrc),
(rtp_session_get_source_by_cname), (rtp_session_create_source),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye),
(rtp_session_process_app), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_get_rtcp_interval),
(rtp_session_produce_rtcp):
* gst/rtpmanager/rtpsession.h:
The advanced beginnings of the main session manager that handles the
participant database of RTPSources, SSRC probation, SSRC collisions,
parse RTCP to update source stats. etc..
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_finalize), (rtp_source_new),
(rtp_source_set_callbacks), (rtp_source_set_as_csrc),
(rtp_source_set_rtp_from), (rtp_source_set_rtcp_from),
(push_packet), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_process_bye),
(rtp_source_send_rtp), (rtp_source_process_sr),
(rtp_source_process_rb):
* gst/rtpmanager/rtpsource.h:
Object that encapsulates an SSRC and its state in the database.
Calculates the jitter and transit times of data packets.
* gst/rtpmanager/rtpstats.c: (rtp_stats_init_defaults),
(rtp_stats_calculate_rtcp_interval), (rtp_stats_add_rtcp_jitter):
* gst/rtpmanager/rtpstats.h:
Various stats regarding the session and sources.
Used to calculate the RTCP interval.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
Some more custom marshallers.
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(clock_rate_request), (create_stream), (gst_rtp_bin_class_init),
(pt_map_requested), (new_ssrc_pad_found), (create_recv_rtp):
* gst/rtpmanager/gstrtpbin.h:
Prepare for caching pt maps.
Connect to signals to collect pt maps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add request_clock_rate signal.
Use scale insteat of scale_int because the later does not deal with
negative numbers.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_class_init),
(gst_rtp_pt_demux_chain):
* gst/rtpmanager/gstrtpptdemux.h:
Implement request-pt-map signal.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_init), (gst_rtp_bin_provide_clock):
* gst/rtpmanager/gstrtpbin.h:
Provide a clock.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Add some debug and comments.
Fix double unref() in error cases.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file
Also used various streaming sources available on the internet to fine-tune
the code.
The header/codec_data extraction methods are from FFMpeg (LGPL).
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.
Fixes#564437
sizeof("foo") includes the string's NUL-terminator in the size returned,
but we're writing strings here with an explicit size at the beginning
and no NUL-terminator. In most cases using sizeof("foo") as length in
memcpy is not harmful, but it is where the string goes right at the
end of our buffer to write, since we don't allocate space for that
NUL terminator.
These filters use information from previous frames to
generate the current frame and a caps change will make
the effect start from the beginning again.
This produces a water ripple effect on the video input,
based on motion or a rain drop algorithm.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588695.
This combines the StreakTV and BaltanTV filters from the
effectv project.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588368.
This filter adds a radiation-like motion blur effect
to the video stream.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588359.
This filter binarizes input frames and combines them with various
optical pattern.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588349.
When blending a source layer with an alpha of 'a' on top of another
destination layer we take the sum of:
* 'a' percent of the source layer
* (100 - 'a') percent of the destination layer (the remainder)
Once buffering has started (with an mdat atom), continue buffering
until moov atom is reached, which handles cases with multiple
mdat atoms. Also keep adapter/offset better in sync with upstream
and fix some debug statements. Fixes#587426.
This reverts commit 5503a59a57.
Reverting this since it causes regressions with a lot of sample files
I have, all of which worked fine with the last -good release (#586891).
Whenever we alloc something based on a user-supplied size, we should
really use g_try_new(), otherwise we can easily be made to abort by
passing a ridiculously large number to us for allocing. Fixes
problems with some fuzzed files.
Check the possibly 64-bit atom size more carefully before casting it
to an int and passing it to gst_pad_pull_range(), otherwise we might
end up pulling 0 bytes, getting an empty buffer as requested and
dereferencing not available data whilst thinking we actually asked
for and got 0x1000000000000 bytes. Similar fix for push mode operation
where neededbytes ends up being 0 bytes, which makes us assert. Fixes
crash with broken or fuzzed file (NB #122378).
Fix the caps to include the depth (instead of width twice) in the caps of
audio/x-raw-int.
Fix negotiation to not only copy the rate/channels of the first structure.
Don't call gst_avi_demux_src_convert() for each single index entry. Not
only do we already have the pointer to the stream context, we also know
the formats we want to convert from and to already, so we may just as
well use optimised conversion routines that bypass some of the checks
and lookups made in gst_avi_demux_src_convert().
Include the header from where we include all the system headers with the
socket stuff before we try to define EAI_ADDRFAMILY ourselves, otherwise
we define it ourselves and then get a compiler warning if a system header
defines it as well without guarding against it being defined already.
Don't leak buffers when resyncing to a keyframe.
Avoid leaking buffers when exiting the loop on error conditions.
Add some more debug info.
Fixes#585911
The previous patch to add support for additional sample formats possibly
introduced a reentrancy bug: a variable used for a loop index was declared
static. This patch fixes that, and also adds a "/* *INDENT-ON* */" annotation
following the macro block. (I don't know what the annotation is for, but the
adder, where I copied this from, has it).
Setting it to a value<16 would cause crashes before because
current_plane was set to the old number of planes-1. Also
fix calculations for non-2^n planes values.
The diff is a signed integer, not an unsigned one of course.
In modes other than GST_DEINTERLACE_ALL every frame has twice the
duration of the field duration.
When there are less timestamps that there are samples, fill up the sample table
with the last know timestamp. This situation can happen when the last sample
does not decode and doesn't need a timestamp. We however calculate the total
track length using the last sample timestamp so we need to have something
sensible in there.
Fixes#585056
in24 samples are normally big-endian but an enda box can change this to
little-endian. Recurse into the in24 box and find the enda box so that we get
the endianness right.
Fixes#582515
gst_adapter_take_buffer doesn't allow buffer to be empty.
Simply skip any part where the content is empty. Don't
create a pad for it either.
See #582169
Original commit message from CVS:
* gst/y4m/gsty4mencode.c: (gst_y4m_encode_init),
(gst_y4m_encode_setcaps):
* tests/check/elements/y4menc.c: (GST_START_TEST):
Plug some leaks; try to make build bot happy again.
Original commit message from CVS:
* ext/dv/gstdvdec.c:
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* gst/y4m/gsty4mencode.c: (gst_y4mencode_sinkconnect):
I'm a bad boy. using /1001. to force C to do float division
and not integer division (as it did in my last commit)
Thanks to David I. Lehn for pointing this mistake.
Original commit message from CVS:
* ext/dv/gstdvdec.c:
* ext/libfame/gstlibfame.c:
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* gst/y4m/gsty4mencode.c: (gst_y4mencode_sinkconnect):
replace framerate aproximations by their real value
(24000/1001, 30000/1001, 60000/1001)
Finish fixing bug #164049
Original commit message from CVS:
a52dec: Use a debug category, Output timestamps correctly
Emit tag info, Handle events, tell liba52dec about cpu
capabilities so it can use MMX etc.
dvdec: Fix a crasher accessing invalid memory
dvdnavsrc:Some support for byte-format seeking.
Small fixes for still frames and menu button overlays
mpeg2dec: Use a debug category. Adjust the report level of several items to
LOG. Call mpeg2_custom_fbuf to mark our buffers as 'custom buffers'
so it doesn't lose the GstBuffer pointer
navseek: Add the navseek debug element for seeking back and forth in a
video stream using arrow keys.
mpeg2subt:Pretty much a complete rewrite. Now a loopbased element. May still
require work to properly synchronise subtitle buffers.
mpegdemux:
dvddemux: Don't attempt to create subbuffers of size 0
Reduce a couple of error outputs to warnings.
y4mencode:Output the y4m frame header correctly
Original commit message from CVS:
Remove all config.h includes from header files, add it to each source file and remove duplicate config.h includes from several source files
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
Original commit message from CVS:
s/@GST_PLUGIN_LDFLAGS@/$(GST_PLUGIN_LDFLAGS)/
@-substitued variables variables are defined as make variables automagically,
and this gives the user the freedom to say make GST_PLUGIN_LDFLAGS=-myflag
For this add a "mode" property that defaults to "interlaced" for now as
most decoders/demuxers don't properly set the "interlaced" field on the
caps yet.
If this property is set to "auto" the element will work in passthrough
mode unless the caps contain the "interlaced" field.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_class_init), (gst_deinterlace2_init),
(gst_deinterlace2_set_property), (gst_deinterlace2_get_property):
Bring properties into this century.
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
Fix unused variable compiler warning when not building
X86 assembly.
Original commit message from CVS:
* gst/dccp/gstdccp.c:
* gst/dccp/gstdccpclientsrc.c:
Fix compilation on Solaris by including filio.h as needed.
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
Fix compilation with Forte - apparently it hates concatenating a
macro argument that starts with an underscore??
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
* gst/deinterlace2/tvtime/tomsmocomp/StrangeBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/WierdBob.inc:
Unroll the loop to handle two bytes at once. This should give
a small speedup and makes it possible to handle chroma and luma
different which is needed later.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_class_init):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
* gst/deinterlace2/tvtime/tomsmocomp/StrangeBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
* gst/deinterlace2/tvtime/tomsmocomp/WierdBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/tomsmocompmacros.h:
First part of the C implementation of the tomsmocomp deinterlacing
algorithm. This only supports search-effort=0 currently, is painfully
slow and needs some cleanup later when all search-effort settings
are implemented in C.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_simple_method_interpolate_scanline),
(gst_deinterlace_simple_method_copy_scanline),
(gst_deinterlace_simple_method_deinterlace_frame):
* gst/deinterlace2/tvtime/greedy.c: (deinterlace_frame_di_greedy):
* gst/deinterlace2/tvtime/greedyh.c:
(deinterlace_frame_di_greedyh):
* gst/deinterlace2/tvtime/scalerbob.c:
(deinterlace_scanline_scaler_bob):
* gst/deinterlace2/tvtime/tomsmocomp.c: (Fieldcopy):
* gst/deinterlace2/tvtime/weave.c: (deinterlace_scanline_weave),
(copy_scanline):
* gst/deinterlace2/tvtime/weavebff.c: (deinterlace_scanline_weave),
(copy_scanline):
* gst/deinterlace2/tvtime/weavetff.c: (deinterlace_scanline_weave),
(copy_scanline):
Use oil_memcpy() instead of memcpy() as it's faster for the sizes that
are usually used here.
Original commit message from CVS:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_c),
(deinterlace_line_mmx), (gst_deinterlace_method_vfir_class_init):
Implement the VFIR deinterlacing method as simple method.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_simple_method_interpolate_scanline),
(gst_deinterlace_simple_method_copy_scanline),
(gst_deinterlace_simple_method_deinterlace_frame),
(gst_deinterlace_simple_method_class_init),
(gst_deinterlace_simple_method_init):
* gst/deinterlace2/gstdeinterlace2.h:
Add a GstDeinterlaceSimpleMethod subclass of GstDeinterlaceMethod that
can be used by simple deinterlacing methods. They only have to provide
a function for interpolating a scanline or copying a scanline.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_chain):
Respect the latency of the deinterlacing algorithm for the timestamps
of every buffer.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
Add the MMX registers to the clobbered registers only if __MMX__ is
defined.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_methods_get_type), (gst_deinterlace2_set_method),
(gst_deinterlace2_class_init):
Enable tomsmocomp again as the C port will be ready for the next
release.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_init),
(gst_greatest_common_divisor), (gst_fraction_double),
(gst_deinterlace2_getcaps), (gst_deinterlace2_setcaps):
Don't use proxy_getcaps() but implement our own getcaps() function
that doubles/halfs the framerate if all fields should be sent out.
Original commit message from CVS:
* configure.ac:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_methods_get_type), (gst_deinterlace2_set_method),
(gst_deinterlace2_class_init), (gst_deinterlace2_init):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/greedy.c:
(gst_deinterlace_method_greedy_l_class_init):
* gst/deinterlace2/tvtime/greedyh.c:
(gst_deinterlace_method_greedy_h_class_init):
* gst/deinterlace2/tvtime/vfir.c:
(gst_deinterlace_method_vfir_class_init):
Disable the tomsmocomp algorithm for this release as it's buggy
and has no C implementation yet.
Build the deinterlace2 plugin on all architectures but still mark it
as experimental.
Build the x86 inline assembly only if GCC inline assembly is supported
and only on x86 or amd64. Fixes bug #543286.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
Always use the C implementation if width is not a multiple of 4. The
assembly optimized version only handle this and calling the C
implementation for the remaining part doesn't work because it needs
previous calculations.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/greedyh.c:
* gst/deinterlace2/tvtime/greedyhmacros.h:
Some cleanup, use 3DNOW instead of TDNOW in macros.
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/tomsmocompmacros.h:
The SSE method in fact only needs MMXEXT, declare it as such.
Original commit message from CVS:
* ext/spc/gstspc.c: (spc_setup):
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
Don't use declarations after statements in the remaining code.
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
Mark internal processing functions as static inline for quite some
speedup as they're used only once and need to get many local variables
passed as parameter.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_get_latency),
(gst_deinterlace2_set_method), (gst_deinterlace2_class_init),
(gst_deinterlace2_push_history), (gst_deinterlace2_chain),
(gst_deinterlace2_setcaps), (gst_deinterlace2_src_query):
* gst/deinterlace2/gstdeinterlace2.h:
Include latency of the method in the returned latency.
Fix outputting of all fields, i.e. doubling of the framerate.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_class_init), (gst_deinterlace_method_init),
(gst_deinterlace_method_deinterlace_frame),
(gst_deinterlace_method_get_fields_required),
(gst_deinterlace2_methods_get_type), (_do_init),
(gst_deinterlace2_set_method), (gst_deinterlace2_class_init),
(gst_deinterlace2_child_proxy_get_child_by_index),
(gst_deinterlace2_child_proxy_get_children_count),
(gst_deinterlace2_child_proxy_interface_init),
(gst_deinterlace2_init), (gst_deinterlace2_finalize),
(gst_deinterlace2_chain), (gst_deinterlace2_src_query):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline_mmxext),
(deinterlace_frame_di_greedy),
(gst_deinterlace_method_greedy_l_set_property),
(gst_deinterlace_method_greedy_l_get_property),
(gst_deinterlace_method_greedy_l_class_init),
(gst_deinterlace_method_greedy_l_init):
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/greedyh.c: (greedyDScaler_C),
(deinterlace_frame_di_greedyh),
(gst_deinterlace_method_greedy_h_set_property),
(gst_deinterlace_method_greedy_h_get_property),
(gst_deinterlace_method_greedy_h_class_init),
(gst_deinterlace_method_greedy_h_init):
* gst/deinterlace2/tvtime/greedyh.h:
* gst/deinterlace2/tvtime/plugins.h:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_set_property),
(gst_deinterlace_method_tomsmocomp_get_property),
(gst_deinterlace_method_tomsmocomp_class_init),
(gst_deinterlace_method_tomsmocomp_init):
* gst/deinterlace2/tvtime/tomsmocomp.h:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_frame_vfir),
(gst_deinterlace_method_vfir_class_init),
(gst_deinterlace_method_vfir_init):
Use a GstObject subtype for the deinterlacing methods and export
the different settings for each deinterlacing method via GObject
properties.
Implement GstChildProxy interface to allow access to the used
deinterlacing method and to allow adjusting the different settings.
Move global variables of the tomsmocomp deinterlacing method into
function local variables to make it possible to use this deinterlacing
method from different instances.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
Support widths that are not a multiply of 4 when using the assembly
optimized greedyh implementations.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.c:
(deinterlace_frame_di_greedyh):
Only build the assembly optimized implementations on x86.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/tvtime/tomsmocomp.c: (tomsmocomp_init),
(tomsmocomp_filter_mmx), (tomsmocomp_filter_3dnow),
(tomsmocomp_filter_sse), (deinterlace_frame_di_tomsmocomp):
* gst/deinterlace2/tvtime/tomsmocomp.h:
Remove useless file and mark everything possible as static.
* gst/deinterlace2/tvtime/greedy.c:
* gst/deinterlace2/tvtime/greedyh.c:
Use "_stdint.h" instead of <stdint.h>.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_init):
* gst/deinterlace2/tvtime/greedy.c: (deinterlace_frame_di_greedy):
* gst/deinterlace2/tvtime/greedyh.c:
(deinterlace_frame_di_greedyh):
* gst/deinterlace2/tvtime/speedtools.h:
* gst/deinterlace2/tvtime/speedy.c:
* gst/deinterlace2/tvtime/speedy.h:
* gst/deinterlace2/tvtime/tomsmocomp.c: (Fieldcopy):
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_frame_vfir):
Get rid of speedy.[ch] as we don't use most of it's code anyway
and it doesn't seem to be relicensed to LGPL. Use memcpy() instead
of the speedy memcpy everywhere instead.
* gst/deinterlace2/gstdeinterlace2.h:
Remove many unused declarations.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_src_query):
Divide latency be 2 to convert from fields to frames.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline_mmxext),
(deinterlace_frame_di_greedy):
Don't use scanlines function from gstdeinterlace2 as it's
not appropiate for this method. Instead implement deinterlace_frame
function by taking the one from greedyh.
* gst/deinterlace2/tvtime/greedyh.c: (greedyDScaler_C):
Small fix for the C implementation.
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_frame_vfir):
Don't use the scanlines function from gstdeinterlace2 as it's only
used for this method and will be removed. Instead implement
deinterlace_frame function and make it a bit more efficient.
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_class_init), (gst_deinterlace2_set_method),
(gst_deinterlace2_push_history), (gst_deinterlace2_chain),
(gst_deinterlace2_setcaps), (gst_deinterlace2_sink_event),
(gst_deinterlace2_change_state), (gst_deinterlace2_src_event),
(gst_deinterlace2_src_query):
Fix coding style and remove scanlines function as it's unused now.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/greedyh.c: (greedyDScaler_C),
(deinterlace_frame_di_greedyh), (dscaler_greedyh_get_method):
* gst/deinterlace2/tvtime/greedyhmacros.h:
Add a C implementation for the greedyh deinterlacing method, clean
up the code a bit and mark the SSE version as MMXEXT as it doesn't
require any SSE instructions.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_set_property), (gst_deinterlace2_chain),
(gst_deinterlace2_setcaps):
If we're outputting all fields the framerate has to be doubled.
Set duration on the outgoing buffers.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline_mmxext):
Optimize MMX/MMXEXT implementations a bit by requiring two less
memory accesses and fix the workaround for the missing right shift
on bytes to unset the highest bit of every byte.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_mmxext):
Remove sfence instruction as it's not needed and actually is an SSE
instruction.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline):
Add plain MMX implementation for the greedyl method.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
Move the assembly includes to noinst_HEADERS where they belong.
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_c),
(deinterlace_line_mmx):
Fix C and MMX implementations a bit more.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline_mmxext),
(deinterlace_greedy_packed422_scanline):
Fix the C implementation to produce correct results and optimize the
MMXEXT implementation.
Handle odd widths and don't read over array boundaries in the MMXEXT
implementation.
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_c),
(deinterlace_line_mmx), (deinterlace_scanline_vfir):
Fix a small rounding bug in the MMX implementation, the MMX
implementation doesn't actually need MMXEXT instructions so don't mark
it as such.
Handle odd widths in both implementations.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_sse),
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline):
Implement a C version of the greedy low motion algorithm and mark the
assembly optimized version as SSE as it uses SSE instructions
additional to MMX instructions.
Original commit message from CVS:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_mmxext),
(deinterlace_line_c), (deinterlace_scanline_vfir):
Make it possible to use the vfir method on X86 CPUs without MMXEXT too
but use the MMXEXT optimized code whenever possible.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_class_init), (gst_deinterlace2_init),
(gst_deinterlace2_reset_history), (gst_deinterlace2_reset),
(gst_deinterlace2_finalize), (gst_deinterlace2_chain),
(gst_deinterlace2_sink_event), (gst_deinterlace2_change_state),
(gst_deinterlace2_src_query):
* gst/deinterlace2/gstdeinterlace2.h:
Reset element state on PAUSED->READY properly, don't leak any buffers
when finalizing, allocate buffers with gst_pad_alloc_buffer() and
properly return flow returns from gst_pad_push() instead of ignoring them.
Original commit message from CVS:
* configure.ac:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
Fix compilation on generic x86/amd64 and include deinterlace2 in the
build system. Because of several bugs it's still enabled only
by --enable-experimental.
We shouldn't register a new GstTag for every unknown tag
we find as this might lead to conflicts and also those
tags are essentially unknown.
Add mappings for some known tags and also convert string
dates to GDate, as found in many FLV files.
Add support for ECMA arrays in script tags. This fixes
seeking on some files that have the seek table stored
inside an ECMA array instead of the normal array.
Original commit message from CVS:
2008-11-24 Julien Moutte <julien@fluendo.com>
* gst/flv/gstflvdemux.c: (gst_flv_demux_find_offset),
(gst_flv_demux_handle_seek_push),
(gst_flv_demux_handle_seek_pull):
Fix non key unit seeking by always going to the previous
keyframe. Mark
the discont flag when we've moved in the file.
* gst/flv/gstflvparse.c: (gst_flv_parse_audio_negotiate): MP3
streams
are parsed already, makes autoplugged pipelines shorter.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_loop), (gst_flv_demux_handle_seek_push),
(gst_flv_demux_handle_seek_pull), (gst_flv_demux_sink_event),
(gst_flv_demux_dispose), (gst_flv_demux_init):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video), (gst_flv_parse_tag_timestamp):
Put the GstSegment directly into the instance struct instead of
allocating and free'ing it again.
Push tags already if only one pad was added, no need to wait for
the second one.
When generating our index set has_video and has_audio if we find
video or audio in case the FLV header has incorrect data.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_chain),
(gst_flv_demux_pull_tag), (gst_flv_demux_pull_header),
(gst_flv_demux_create_index):
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_timestamp), (gst_flv_parse_tag_type),
(gst_flv_parse_header):
* gst/flv/gstflvparse.h:
Don't memcpy() all data we want to push downstream, instead just
create subbuffers and push them downstream.
Fix some minor memory leaks.
Original commit message from CVS:
* gst/flv/Makefile.am:
Fix (non-critical) syntax error and add all required CFLAGS and LIBS.
* gst/flv/gstflvparse.c: (FLV_GET_STRING),
(gst_flv_parse_metadata_item), (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_timestamp), (gst_flv_parse_tag_type):
Rewrite the script tag parsing to make sure we don't try to read
more data than we have. Also use GST_READ_UINT24_BE directly and
fix some minor memory leaks.
This should make all crashes on fuzzed FLV files disappear.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (FLV_GET_STRING),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_type), (gst_flv_parse_header):
Properly check everywhere that we have enough data to parse and
don't read outside the allocated memory region.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
If the caps change during playback and negotiation fails error out
instead of trying to continue.
Original commit message from CVS:
* gst/flv/gstflvmux.c: (gst_flv_mux_audio_pad_setcaps),
(gst_flv_mux_request_new_pad), (gst_flv_mux_write_buffer),
(gst_flv_mux_collected):
* gst/flv/gstflvmux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_audio_negotiate):
Add support for Speex audio and allow buffers without valid
timestamp in the muxer.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_loop),
(gst_flv_demux_find_offset), (gst_flv_demux_handle_seek_push),
(gst_flv_demux_handle_seek_pull):
Don't post an error message on the bus if sending EOS downstream
didn't work. Fixes bug #550454.
Fix seek event handling to look at the flags of the seek event
instead of assuming some random flags, don't send segment-start
messages when operating in push mode and push seek events upstream
if we couldn't handle them.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_create_index),
(gst_flv_demux_loop):
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_timestamp):
* gst/flv/gstflvparse.h:
In pull mode we create our own index before doing anything else
and don't use the index provided by some files (which are more than
often incorrect and cause failed seeks).
For push mode we still use the index provided by the file and extend it
while doing the playback.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_push_src_event),
(gst_flv_demux_loop), (gst_flv_demux_handle_seek_pull),
(gst_flv_demux_sink_event):
Instead of using gst_pad_event_default() use a small
gst_pad_push_event() wrapper that only does what we want and is much
more simple.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_change_state),
(gst_flv_demux_set_index), (gst_flv_demux_init):
* gst/flv/gstflvdemux.h:
If our index was created by the element and not provided from the
outside we should destroy it when starting a new stream to get
all old entries removed.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_pull_range):
Improve debugging a bit when pulling a buffer from upstream fails.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_handle_seek_pull), (gst_flv_demux_dispose):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Close the currently playing segment from the streaming thread
instead of the thread where the seek event is handled.
Original commit message from CVS:
* gst/flv/gstflvmux.c: (gst_flv_mux_audio_pad_setcaps),
(gst_flv_mux_write_buffer):
Don't set video_codec to the value that actually should go
into audio codec, otherwise we create invalid files.
Fixes bug #556564.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Use gst_pad_alloc_buffer_and_set_caps() to make sure we get
a buffer with caps that we can work with (i.e. the pad's caps).
Add non-keyframe video frames to the index too but without the
keyframe flag.
Add audio frames to the index only if we have no video stream.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Create pads from the pad templates, use fixed caps on them
and only activate them after the caps are set.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_loop):
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_timestamp):
* gst/flv/gstflvparse.h:
Get an approximate duration of the file by looking at the timestamp
of the last tag in pull mode. If we get (maybe better) duration from
metadata later we'll use that instead.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_pull_range),
(gst_flv_demux_pull_tag), (gst_flv_demux_pull_header):
Refactor _pull_range() logic with checks into a seperate function
to make things a bit more readable.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_chain),
(gst_flv_demux_base_init):
Use gst_element_class_set_details_simple().
If we get GST_FLOW_NOT_LINKED in the parse loop but at least
one of the pads is linked continue the loop.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_audio_negotiate),
(gst_flv_parse_tag_audio), (gst_flv_parse_video_negotiate):
Correct caps for video codec id 5: It's On2 VP6 with alpha channel
which needs a different decoder and has different caps.
Add support for audio codec id 14, which is MP3 with 8kHz sampling
rate.
Fix endianness and signedness for raw audio codec ids.
Add support for alaw and mulaw audio.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_chain):
Go out of the parse loop as soon as we get an error instead
of parsing until the GstAdapter is empty.
Add some explanations about the header and tag size.
Don't print synchronizing message if everything is fine.
Original commit message from CVS:
* gst/flv/Makefile.am:
* gst/flv/gstflvdemux.c: (plugin_init):
* gst/flv/gstflvmux.c: (gst_flv_mux_base_init),
(gst_flv_mux_class_init), (gst_flv_mux_init),
(gst_flv_mux_finalize), (gst_flv_mux_reset),
(gst_flv_mux_handle_src_event), (gst_flv_mux_handle_sink_event),
(gst_flv_mux_video_pad_setcaps), (gst_flv_mux_audio_pad_setcaps),
(gst_flv_mux_request_new_pad), (gst_flv_mux_release_pad),
(gst_flv_mux_write_header), (gst_flv_mux_write_buffer),
(gst_flv_mux_collected), (gst_flv_mux_change_state):
* gst/flv/gstflvmux.h:
Add first version of a FLV muxer. The only missing feature is writing
of stream metadata.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_metadata_item),
(gst_flv_parse_tag_script):
Handle NULL returns from FLV_GET_STRING() more gracefully. Fixes
crash caused by a strlen on a NULL string (#527622).
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Don't strdup (and thus leak) codec name strings when passing
them to gst_tag_list_add().
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Fix list of supported and known codecs.
Emit tag with the codec name so it gets properly reported in totem and
other applications.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Output segment with proper 'stop' value, makes flvdemux 100% compatible
with gnonlin.
Original commit message from CVS:
* gst/flv/gstflvparse.c:
Add mapping for Nellymoser ASAO audio codec.
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video): Make sure we
actually have data to read at the end of the tag. This avoids trying
to allocate negative buffers.
Original commit message from CVS:
2007-10-22 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video), (gst_flv_parse_tag_type): Don't
emit no-more-pads for single pad scenarios as the header
is definitely not reliable. We emit them for 2 pads scenarios
though to speed up media discovery.
Original commit message from CVS:
2007-09-27 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): I got it wrong again, audio rate
was not detected correctly in all cases.
Original commit message from CVS:
2007-09-26 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): codec_data is needed for every tag
not just the first one. (Fix a stupid bug i introduced without
testing)
Original commit message from CVS:
2007-09-26 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): Fix bit masks operations to be
sure we detect the codec_tags and sample rates correctly.
Fix raw audio caps generation.
Original commit message from CVS:
2007-08-27 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_handle_seek_pull):
Make sure we initialize the seek result.
Original commit message from CVS:
2007-08-22 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_pull_tag):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (gst_flv_parse_metadata_item),
(gst_flv_parse_tag_script), (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): Handle pixel aspect ratio through
metadata tags like ASF does. Fluendo muxer supports this and
Flash players can support it as well this way.
Original commit message from CVS:
2007-08-22 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_pull_tag):
* gst/flv/gstflvparse.c: (gst_flv_parse_metadata_item),
(gst_flv_parse_tag_script), (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): Make sure we don't try filling up the
index if no times object was parsed. Fix the way we decide to
push
tags and emit no-more-pads. Fix some printf typing in debugging.
Original commit message from CVS:
* gst/flv/gstflvdemux.c: (gst_flv_demux_set_index),
(gst_flv_demux_get_index):
Fix locking and refcounting on the index.
Original commit message from CVS:
2007-08-14 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvdemux.c: (gst_flv_demux_cleanup),
(gst_flv_demux_adapter_flush), (gst_flv_demux_chain),
(gst_flv_demux_pull_tag), (gst_flv_demux_do_seek),
(gst_flv_demux_handle_seek), (gst_flv_demux_sink_event),
(gst_flv_demux_src_event), (gst_flv_demux_query),
(gst_flv_demux_change_state), (gst_flv_demux_set_index),
(gst_flv_demux_get_index), (gst_flv_demux_dispose),
(gst_flv_demux_class_init): First method for seeking in pull
mode using the index built step by step or coming from metadata.
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (FLV_GET_STRING),
(gst_flv_parse_metadata_item), (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video): Parse
more metadata types and keyframes index.
Original commit message from CVS:
2007-07-19 Julien MOUTTE <julien@moutte.net>
* configure.ac:
* gst/flv/Makefile.am:
* gst/flv/gstflvdemux.c: (gst_flv_demux_flush),
(gst_flv_demux_cleanup), (gst_flv_demux_chain),
(gst_flv_demux_pull_tag), (gst_flv_demux_pull_header),
(gst_flv_demux_seek_to_prev_keyframe), (gst_flv_demux_loop),
(gst_flv_demux_sink_activate),
(gst_flv_demux_sink_activate_push),
(gst_flv_demux_sink_activate_pull), (gst_flv_demux_sink_event),
(gst_flv_demux_change_state), (gst_flv_demux_dispose),
(gst_flv_demux_base_init), (gst_flv_demux_class_init),
(gst_flv_demux_init), (plugin_init):
* gst/flv/gstflvdemux.h:
* gst/flv/gstflvparse.c: (FLV_GET_BEUI24), (FLV_GET_STRING),
(gst_flv_demux_query_types), (gst_flv_demux_query),
(gst_flv_parse_metadata_item), (gst_flv_parse_tag_script),
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video),
(gst_flv_parse_tag_type), (gst_flv_parse_header):
* gst/flv/gstflvparse.h: Adds a first draft of an FLV demuxer.
It does not do seeking yet, it supports pull and push mode so
YES
you can use it to play youtube videos directly from an HTTP uri.
Not so much testing done yet but it parses metadata, reply to
duration queries, etc...
First of all a keyframe seek should be done to the
keyframe right before the requested position and not
to the keyframe that is nearest to the requested position.
Use per track index arrays and use our new binary search function
from core to speed up the search.
Rewrite the quant table parsing to also handle multiple tables in one JPEG HDQ
segment.
Handle more jpeg types by keeping track of the tables used per component and
putting the used ones in the quant headers.
Read the timestamp of the incomming buffer before we push it in the adapter and
flush it out again as the buffer might be unreffed then and we read from invalid
memory.
Fixes#581444.
Don't require width/height on the caps. Use the SOF header to find width/height
and fall back to the caps if there is no SOF. Also use the SOF info to find the
subsampling and quantization tables used. This allows us to set the right type
value in the JPEG rtp header.
Deprecate the quality property, it's unused now and it was used wrongly before.
Always send full quant tables for now until we have some code to detect default
ones.
Fixes#580880
Use the width and the height from the payload headers and set them on the
output caps for added awesomeness.
Fix quant parsing, we need to check the type in the lower 6 bits.
Add first bits of caching quantization tables.
Server eof (e.g. connection closed) is announced as connection closed,
so better record state and act accordingly to prevent (read/write)
errors during subsequent teardown/cleanup sequences. #Fixes 580851.(c).
We didn't handle unsynchronization at all up to now, which might have
caused frames to not be extracted - esp. frames after an APIC picture
frame. Fixes#577468.
If the codec is actually something else (e.g. mjpeg) change the caps to
match when parsing the ESDS atom.
Also, for AAC, override rate and channels with correct values read from
ESDS, since the rate/channels values elsewhere are often wrong.
We implemented the AAL2 packing, add the encoding-name for those to the caps and
a property to force AAL2 decoding (always TRUE for now).
Implement RFC3551 unpacking for regular G726.
See #567140.
In streaming mode, avidemux is not supposed to send an EOS event downstream but
it is supposed to return UNEXPECTED from the chain function instead so that
upstream can do the right EOS handling.
Fix the duration query so that it also works with formats other than
TIME, such as DEFAULT to get the number of frames.
Add a convert function.
Fixes#578052.
In the sequence of header lengths, for headers >127 bytes, we use
multiple bytes to encode the length. Bytes other than the last must have
the top (flag) bit set.
The on-npt-stop signals was added only recently to rtpjitterbuffer in
-bad, so check if the signal exists before g_signal_connect()ing to
it, to avoid warnings.
Some clips (trailers) may have (length-wise) unbalanced streams,
which stalls the pipeline if seeking into that region.
Additional stream synchronization can handle this, as well as
sparse (subtitle) streams (at some later time ?)
Try to post a decent error message when it looks like we're failing
because the Real RTSP extension plugin is missing. Also add i18n
bits for rtspsrc so our error messages get translated.
Cater for DELTA_UNIT flag on buffers, keep track of current
position, remove and warn about edit lists if any (as those
as are de facto discarded anyway), add some debug statements
and indent fixes.
The audioMuxVersion structure is packed in such a way that the codec
data does not start byte-aligned, which means there's an extra bit of
padding at the end. We don't want that bit in the codec data, since
some decoders seem get confused when they're fed with an extra codec
data byte (also it's just not right of course).
Add network interface selection when joining multicast groups.
Useful when using the udpsrc on multihomed hosts.
Fixes#575234.
API: GstUDPSrc::multicast-iface
Non-ok flow returns may happen for a variety of perfectly legitimate and expected reasons
(temporarily not linked, seeking, pipeline shutdown), so we really shouldn't spew ERROR
debug messages to stderr in those cases. Fixes#570781. (Seems like someone already took
care of some of these.)
Standard pull mode loop based SEEK handling fails in push mode,
so convert the SEEK event appropriately and dispatch to upstream.
Also cater for NEWSEGMENT event handling, and properly inform
downstream and application of SEEKABLE capabilities, depending
on scheduling mode and upstream.
Previously the sockaddr length used for recvfrom() was calculated as
sizeof (struct sockaddr). However, this is too little to hold an IPv6
address, so the full size of the gst_sockaddr union should be used
instead.
MS RTSP spec states that the UDP port pair used in subsequent SETUP
requests for various streams must be identical (since there will actually
be only 1 stream of muxed asf packets). Following traditional specs and
using different port pairs in the SETUPs for separate streams will result
in all but the first one failing and only one stream being streamed.
So, in appropriate circumstances, retry UDP SETUP using previously used
port pair. Fixes#552650.
When we are dealing with connected sockets shared between a udpsrc and a udpsink
we might receive ICMP connection refused error messages in udpsrc that will
cause it to go into a bursty loop because the poll returns right away without a
message to read.
Instead of looping, read the error message from the error queue in udpsrc.
Fixes#567857.
Reading integers from random memory addresses will result
in SIGBUS on some architectures if the memory address
is not correctly aligned. This can happen at two
places in avidemux so we should use GST_READ_UINT32_LE
and friends here. Fixes bug #572256.
stps atoms contain "partial sync" information, which means that it's
a sync point where pts != dts. This is needed to properly handle
MPEG2, H.264, Dirac, etc., in quicktime.
Not all Matroska files have a Tags element which contains
information about the title among other things. Most video
Matroska files only contain the Title element so we
should parse this too. Fixes bug #570435.
Move reallocating the history buffer out of _compute_frequencies() and call the
right function as needed. Add some logging and tweak the formatting of existing
logging. Simplify setting need_new_coefficients when changing properties.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
Introduce a new max-delay property that can only
be set before going to PLAYING or PAUSED. This
is used to limit the maximum delay and is set
to the current delay by default.
Using this will make sure that we have enough data
in our internal ringbuffer for the echo. With dynamic
reallocation of the ringbuffer as used before silence
could've been used as the echo directly after setting
a new delay.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Save some allocations if the echo delay is increased often
during playback by always allocating enough memory to hold
data up to the next complete second, i.e. in the worst case
allocate memory for one additional second.
Add a note to the docs that audioecho's reverb will
sound metallic. This happens because for a real
reverb filter additional filtering is necessary.
Also note which values should be used for the delay
property to get an echo effect.
The element can add an echo and a simple reverb effect to
an audio stream but for a real reverb filter it would need
some additional filtering to prevent a metallic-sounding
result.
Original commit message from CVS:
Patch by: Luotao Fu <l dot fu at pengutronix dot de>
* gst/videocrop/gstvideocrop.c:
(gst_video_crop_get_image_details_from_caps):
Add 8bit grayscale support to videocrop plugin. Fixes#567952.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_reset_state),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Implement a simple compensation algorithm for rounding errors.
This makes sure that a spectrum message is posted on the bus
every interval nanoseconds. Fixes bug #567955.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_segments):
Catch invalid and commonly wrong playback rates in the elst atoms.
Fixes#567800.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_reset_state):
Don't call gst_fft_f32_free() with NULL to prevent a
crash. Fixes bug #567642.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Use correct types for frame/fft counters and some minor
cleanup.
Original commit message from CVS:
* gst/spectrum/Makefile.am:
* gst/spectrum/README:
* gst/spectrum/gstspectrum.c: (gst_spectrum_base_init),
(gst_spectrum_class_init), (gst_spectrum_init),
(gst_spectrum_reset_state), (gst_spectrum_finalize),
(gst_spectrum_set_property), (gst_spectrum_start),
(gst_spectrum_stop), (gst_spectrum_setup),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Post a spectrum message on the bus for every interval, even
if the interval is small than the length of the FFT.
Fixes bug #567642.
Major cleanup of the spectrum element.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagoss@embedded.ufcg.edu.br>
* gst/qtdemux/qtdemux.c:
Fix format string for guint64.
Original commit message from CVS:
* gst/audiofx/audiochebband.c: (gst_audio_cheb_band_class_init),
(gst_audio_cheb_band_init), (gst_audio_cheb_band_finalize),
(gst_audio_cheb_band_set_property):
* gst/audiofx/audiochebband.h:
* gst/audiofx/audiocheblimit.c: (gst_audio_cheb_limit_class_init),
(gst_audio_cheb_limit_init), (gst_audio_cheb_limit_finalize),
(gst_audio_cheb_limit_set_property):
* gst/audiofx/audiocheblimit.h:
* gst/audiofx/audiowsincband.c: (gst_audio_wsincband_class_init),
(gst_audio_wsincband_init), (gst_audio_wsincband_finalize),
(gst_audio_wsincband_set_property):
* gst/audiofx/audiowsincband.h:
* gst/audiofx/audiowsinclimit.c: (gst_audio_wsinclimit_class_init),
(gst_audio_wsinclimit_init), (gst_audio_wsinclimit_finalize),
(gst_audio_wsinclimit_set_property):
* gst/audiofx/audiowsinclimit.h:
Use a custom mutex for protecting the instance fields instead of
the GstObject lock. Using the latter can lead to deadlocks, especially
with the FIR filters when updating the latency.
Original commit message from CVS:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofxbasefirfilter.c:
(gst_audio_fx_base_fir_filter_dispose),
(gst_audio_fx_base_fir_filter_base_init),
(gst_audio_fx_base_fir_filter_class_init),
(gst_audio_fx_base_fir_filter_init),
(gst_audio_fx_base_fir_filter_push_residue),
(gst_audio_fx_base_fir_filter_setup),
(gst_audio_fx_base_fir_filter_transform),
(gst_audio_fx_base_fir_filter_start),
(gst_audio_fx_base_fir_filter_stop),
(gst_audio_fx_base_fir_filter_query),
(gst_audio_fx_base_fir_filter_query_type),
(gst_audio_fx_base_fir_filter_event),
(gst_audio_fx_base_fir_filter_set_kernel):
* gst/audiofx/audiofxbasefirfilter.h:
* gst/audiofx/audiofxbaseiirfilter.c:
Implement a base class for generic audio FIR filters.
* gst/audiofx/audiowsincband.c:
(gst_gst_audio_wsincband_mode_get_type),
(gst_gst_audio_wsincband_window_get_type),
(gst_audio_wsincband_base_init), (gst_audio_wsincband_class_init),
(gst_audio_wsincband_init), (gst_audio_wsincband_build_kernel),
(gst_audio_wsincband_setup), (gst_audio_wsincband_set_property),
(gst_audio_wsincband_get_property):
* gst/audiofx/audiowsincband.h:
* gst/audiofx/audiowsinclimit.c:
(gst_audio_wsinclimit_mode_get_type),
(gst_audio_wsinclimit_window_get_type),
(gst_audio_wsinclimit_base_init),
(gst_audio_wsinclimit_class_init), (gst_audio_wsinclimit_init),
(gst_audio_wsinclimit_build_kernel), (gst_audio_wsinclimit_setup),
(gst_audio_wsinclimit_set_property),
(gst_audio_wsinclimit_get_property):
* gst/audiofx/audiowsinclimit.h:
* tests/check/elements/audiowsincband.c: (GST_START_TEST):
* tests/check/elements/audiowsinclimit.c: (GST_START_TEST):
Use this new base class for audiowsincband and audiowsinclimit.
Also cleanup both elements.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c:
In push mode, error out if we get EOS before we've created any srcpads.
Handle (in pull mode) some files that have a truncated moov atom where
the final sub-atom is a 'free' atom and the contents of that are not
present in the file.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
* gst/matroska/matroska-mux.c: (gst_matroska_mux_video_pad_setcaps):
Some cleanups, refactoring and minor enhancements in caps handling.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_class_init),
(gst_matroska_mux_init), (gst_matroska_pad_reset),
(gst_matroska_pad_free), (gst_matroska_mux_reset),
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_request_new_pad):
* tests/check/elements/matroskamux.c: (teardown_src_pad):
Only remove, release or reset what is appropriate upon state change.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_reset),
(gst_matroska_mux_handle_sink_event), (gst_matroska_mux_finish):
* gst/matroska/matroska-mux.h:
Remove internal taglist and fully use tagsetter interface.
Original commit message from CVS:
* gst/avi/gstavimux.c: (gst_avi_mux_reset),
(gst_avi_mux_riff_get_avi_header):
* gst/avi/gstavimux.h:
Ensure header size invariance during subsequent rewrite by using
tags snapshot.
Original commit message from CVS:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofxbaseiirfilter.c:
(gst_audio_fx_base_iir_filter_base_init),
(gst_audio_fx_base_iir_filter_dispose),
(gst_audio_fx_base_iir_filter_class_init),
(gst_audio_fx_base_iir_filter_init),
(gst_audio_fx_base_iir_filter_calculate_gain),
(gst_audio_fx_base_iir_filter_set_coefficients),
(gst_audio_fx_base_iir_filter_setup), (process),
(gst_audio_fx_base_iir_filter_transform_ip),
(gst_audio_fx_base_iir_filter_stop):
* gst/audiofx/audiofxbaseiirfilter.h:
Implement a base class for IIR filters.
* gst/audiofx/audiochebband.c: (gst_audio_cheb_band_base_init),
(gst_audio_cheb_band_class_init), (gst_audio_cheb_band_init),
(generate_coefficients), (gst_audio_cheb_band_set_property),
(gst_audio_cheb_band_setup):
* gst/audiofx/audiochebband.h:
* gst/audiofx/audiocheblimit.c: (gst_audio_cheb_limit_base_init),
(gst_audio_cheb_limit_class_init), (gst_audio_cheb_limit_init),
(generate_coefficients), (gst_audio_cheb_limit_set_property),
(gst_audio_cheb_limit_setup):
* gst/audiofx/audiocheblimit.h:
Use the IIR filter base class for the chebyshev filters.
Original commit message from CVS:
Patch by: j^ <j at oil21.org>
* gst/qtdemux/qtdemux.c: (qtdemux_video_caps),
(qtdemux_audio_caps):
Add codec mapping for xvid, fmp4 and ac3 tracks.
Fixes#565850
Original commit message from CVS:
* ext/pulse/pulsemixerctrl.c:
And remove temporary comment pointing to the bug ticket.
* gst/avi/gstavimux.c:
Move reoccuring logging to LOG and log instance too.
Original commit message from CVS:
* gst/avi/gstavimux.c:
Instead of filtering wrongly just use the mergemode. Applications is
use KEEP_ALL if they want to supress tag-events. Fixes#563221 for
avi for real (I hope). Everyone chime in, before I fix the others.
Original commit message from CVS:
* gst/avi/gstavidemux.c:
More logging.
* gst/avi/gstavimux.c:
Handle more metadata fields. Better estimate of metadata size. Don't
merge received tags, if application has specified tags using
GST_TAG_MERGE_REPLACE_ALL. Fixes#563221 for avi.
Original commit message from CVS:
* gst/rtp/gstrtpjpegdepay.c: (gst_rtp_jpeg_depay_process):
Add an EOI marker at the end of the jpeg frame when it's missing.
Fixes#563056.
Original commit message from CVS:
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_flush),
(gst_rtp_mp4v_pay_event):
Don't try to push packets before we could find a valid config
startcode. Fixes#563509.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_render):
Provide the parameters that are required for the format string
to fix a compiler warning.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_render):
Make gst_multiudpsink_render() ignore errors from sendto() instead of
breaking streaming. Emit a warning instead. Fixes#562572.
Original commit message from CVS:
Patch by: 이문형 <iwings at gmail dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_loop_udp):
Prevent further read/write actions taken to the connect-failed socket by
erroring out quickly. See #562258.
Original commit message from CVS:
2008-11-25 Julien Moutte <julien@fluendo.com>
* gst/qtdemux/qtdemux.c: (qtdemux_video_caps): Add MPG1 and MPG2
fourcc
to supported qtdemux video codecs as I found some video clips
using
those.
Original commit message from CVS:
* gst/autodetect/gstautoaudiosink.c: (gst_auto_audio_sink_detect):
* gst/autodetect/gstautoaudiosrc.c: (gst_auto_audio_src_detect):
* gst/autodetect/gstautovideosink.c: (gst_auto_video_sink_reset),
(gst_auto_video_sink_detect):
* gst/autodetect/gstautovideosrc.c: (gst_auto_video_src_detect):
Post an error when we can't set the internal ghostpad target.
Original commit message from CVS:
* gst/videocrop/gstvideocrop.c: (gst_video_crop_init),
(gst_video_crop_transform), (gst_video_crop_transform_caps),
(gst_video_crop_set_caps), (gst_video_crop_set_property):
* gst/videocrop/gstvideocrop.h:
Fix renegotiation when changing properties using the new basetransform
features. Fixes#561502.
* tests/icles/Makefile.am:
* tests/icles/videocrop2-test.c: (make_pipeline), (main):
Add crazy interactive test unit for dynamically changing properties.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (new_session_pad),
(gst_rtspsrc_parse_range):
Add some more debugging.
Use the reanges received from the server unconditionally.
Fixes#561625.
Original commit message from CVS:
Patch by: Tal Shalif <tshalif at nargila dot org>
* gst/qtdemux/qtdemux.c: (qtdemux_audio_caps):
Use G_{BIG,LITTLE}_ENDIAN instead of the non-GLib variants as
the latter don't exist on some systems (mingw). Fixes bug #561992.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c:
* gst/udp/gstudpnetutils.c:
* gst/udp/gstudpnetutils.h:
* gst/udp/gstudpsrc.c:
Fix multiudpsink on OSX by passing the specific length of the socket,
refactor that into a function shared with the same thing in udpsrc.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(uint64_ceiling_scale), (gst_wavparse_calculate_duration),
(gst_wavparse_stream_headers):
Fix the scaling code.
Fix parsing of the INFO chunks, we were reading the wrong number of
bytes. Fixes#561580.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_audio_caps):
* gst/matroska/matroska-ids.h:
Make mkvdemux aware of E-AC3.
Original commit message from CVS:
* gst/rtsp/Makefile.am:
* gst/rtsp/gstrtsp.c: (plugin_init):
* gst/rtsp/gstrtspgoogle.c:
* gst/rtsp/gstrtspgoogle.h:
Remove google extension again, it's not needed anymore because we never
send multiple transports anymore.
Original commit message from CVS:
Based on patch by: Eric Zhang <chao.zhang at access-company dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtsp_nat_method_get_type),
(gst_rtspsrc_class_init), (gst_rtspsrc_set_property),
(gst_rtspsrc_get_property), (gst_rtspsrc_create_stream),
(gst_rtspsrc_stream_free),
(gst_rtspsrc_stream_configure_udp_sinks),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_send_dummy_packets),
(gst_rtspsrc_create_transports_string),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Add property to configure NAT traversal method.
Ignore EOS from the internal sinks.
Implement sending dummy packets as a (simple) method to open up
some firewalls.
Send PLAY request to the server after we started the udp sources.
Fixes#559545.
Original commit message from CVS:
Patch by: Yotam <sh dot yotam at gmail dot com>
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_event):
Flush the remaining frames on EOS. Fixes#560641.
Original commit message from CVS:
* gst/qtdemux/qtdemux.h (struct _GstQTDemux):
* gst/qtdemux/qtdemux.c (gst_qtdemux_do_seek): Queue up new
segment events instead of sending them from the seeking thread.
Fixes#559288.
(gst_qtdemux_push_pending_newsegment): New helper, sends out
queued newsegment events.
(gst_qtdemux_loop_state_movie): Voilà, call it here. Only need to
call it here, as we only seek when looping, and only push in the
movie state.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_tag_add_tmpo),
(qtdemux_tag_add_covr), (qtdemux_parse_udta):
* gst/qtdemux/qtdemux_fourcc.h:
* gst/qtdemux/qtdemux_types.c:
Add cover and alternative copyright tag, and enhance some existing
ones by marking them as container atoms.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_transports_string),
(gst_rtspsrc_change_state):
Only send one transport at a time for improved compatibility with some
broken servers. See #537832.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_do_seek),
(gst_rtspsrc_perform_seek):
Only pause/play in the seek handler when the source was playing.
Fixes#529379.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_handle_dirac_packet):
Fix muxing of Dirac streams if the input already has the format
we need, i.e. is the output of matroskademux.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak),
(qtdemux_video_caps), (qtdemux_audio_caps):
Refactor some raw audio caps building, and handle >16-bit cases.
Fix/replace building caps from a string description.
Original commit message from CVS:
* gst/audiofx/audiowsincband.c:
* gst/audiofx/audiowsinclimit.c:
* gst/cutter/gstcutter.c:
Make author name consistent with others.
Original commit message from CVS:
Based on patch by: Eric Zhang <chao.zhang at access-company dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_perform_seek),
(gst_rtspsrc_stream_configure_udp_sink):
Pause the RTSP stream before doing a new play request.
Make sure that adding the udpsinks does not cause the rtspsrc to become
a sink. Fixes#559547.
Original commit message from CVS:
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_pad_free),
(gst_matroska_mux_handle_dirac_packet),
(gst_matroska_mux_write_data):
Implement Dirac muxing into Matroska comforming to the spec, i.e.
put all Dirac packages up to a picture into a Matroska block.
TODO: Implement writing of the ReferenceBlock Matroska elements,
currently the Dirac muxing is only 100% correct if Matroska version 2
is selected for muxing.
Original commit message from CVS:
* gst/wavenc/gstwavenc.c: (gst_wavenc_create_header_buf),
(gst_wavenc_sink_setcaps), (gst_wavenc_change_state):
* gst/wavenc/gstwavenc.h:
Add support for float/double as input and remove the (nowadays)
useless parsing of the depth as we require width==depth.
Original commit message from CVS:
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps):
* gst/rtp/gstrtpmpapay.c:
Narrow down the caps of the mpeg audio pay/depayloaders to only accept
mpeg version 1. Fixes#558427.
Original commit message from CVS:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_flush),
(gst_rtp_L16_pay_getcaps):
Only put an integral amount of samples in the RTP packet.
Fixes#556641.
Original commit message from CVS:
* gst/rtp/gstrtpchannels.c: (gst_rtp_channels_get_by_index):
* gst/rtp/gstrtpchannels.h:
Add method to get possible channel positions.
Original commit message from CVS:
* gst/wavenc/gstwavenc.c: (gst_wavenc_chain):
Don't allow width=32,depth=24 as input. WAV requires that the width
is the next integer multiply of 8 from the depth.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps):
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps),
(gst_rtp_L16_pay_getcaps):
* gst/rtp/gstrtpchannels.c: (check_channels),
(gst_rtp_channels_get_by_pos), (gst_rtp_channels_get_by_order),
(gst_rtp_channels_create_default):
* gst/rtp/gstrtpchannels.h:
Add mappings for multichannel support. Does not completely just work
because the getcaps function does not yet return the allowed channel
mappings. See #556641.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process):
Check if clock-rate and channels are valid.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpac3depay.c: (gst_rtp_ac3_depay_setcaps),
(gst_rtp_ac3_depay_process):
Don't ignore the return value of set_caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
* gst/rtp/gstrtpamrdepay.h:
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set output caps on the buffers, the base class does that for
us.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpdvdepay.c: (gst_rtp_dv_depay_setcaps),
(gst_rtp_dv_depay_process), (gst_rtp_dv_depay_reset):
* gst/rtp/gstrtpdvdepay.h:
Clean up caps negotiation.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpg726depay.c: (gst_rtp_g726_depay_setcaps),
(gst_rtp_g726_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpg729depay.c: (gst_rtp_g729_depay_init),
(gst_rtp_g729_depay_setcaps), (gst_rtp_g729_depay_process):
* gst/rtp/gstrtpg729depay.h:
The subclass will make sure we are negotiated.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmdepay.c: (gst_rtp_gsm_depay_setcaps),
(gst_rtp_gsm_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmpay.c: (gst_rtp_gsm_pay_setcaps):
Clean up caps negotiation.
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_setcaps),
(gst_rtp_h263_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263pay.c: (gst_rtp_h263_pay_setcaps),
(gst_rtp_h263_pay_flush), (gst_rtp_h263_pay_handle_buffer):
* gst/rtp/gstrtph263pay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_setcaps),
(gst_rtp_h263p_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263ppay.c: (gst_rtp_h263p_pay_class_init),
(gst_rtp_h263p_pay_setcaps), (gst_rtp_h263p_pay_flush),
(gst_rtp_h263p_pay_handle_buffer):
* gst/rtp/gstrtph263ppay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
Fix possible caps leak.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps):
Add some more debug info.
* gst/rtp/gstrtpilbcdepay.c: (gst_rtp_ilbc_depay_setcaps),
(gst_rtp_ilbc_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_sink_setcaps):
Clean up caps negotiation.
* gst/rtp/gstrtpmp1sdepay.c: (gst_rtp_mp1s_depay_setcaps),
(gst_rtp_mp1s_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp2tdepay.c: (gst_rtp_mp2t_depay_setcaps),
(gst_rtp_mp2t_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmp4apay.c: (gst_rtp_mp4a_pay_new_caps),
(gst_rtp_mp4a_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_finalize),
(gst_rtp_mp4g_pay_new_caps), (gst_rtp_mp4g_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4vdepay.c: (gst_rtp_mp4v_depay_setcaps),
(gst_rtp_mp4v_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_new_caps),
(gst_rtp_mp4v_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps),
(gst_rtp_mpa_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpmpapay.c: (gst_rtp_mpa_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpvdepay.c: (gst_rtp_mpv_depay_setcaps),
(gst_rtp_mpv_depay_process):
Clean up caps negotiation.
Actually set output caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmpvpay.c: (gst_rtp_mpv_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmadepay.c: (gst_rtp_pcma_depay_setcaps),
(gst_rtp_pcma_depay_process):
Clean up caps negotiation.
Set output buffer duration because we can.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmapay.c: (gst_rtp_pcma_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_setcaps),
(gst_rtp_pcmu_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmupay.c: (gst_rtp_pcmu_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_setcaps), (gst_rtp_speex_depay_process):
Clean up caps negotiation.
Set output caps on the pad and header buffers.
Set duration on output buffers because we can.
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_parse_ident):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpsv3vdepay.c: (gst_rtp_sv3v_depay_setcaps),
(gst_rtp_sv3v_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
No need to set caps out output buffers, subclass does that.
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps),
(gst_rtp_theora_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtptheorapay.c: (gst_rtp_theora_pay_class_init),
(gst_rtp_theora_pay_flush_packet), (encode_base64),
(gst_rtp_theora_pay_finish_headers), (gst_rtp_theora_pay_parse_id),
(gst_rtp_theora_pay_handle_buffer):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps),
(gst_rtp_vorbis_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_finish_headers):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvrawdepay.c: (gst_rtp_vraw_depay_setcaps):
Clean up caps negotiation, don't ignore setcaps return.
* gst/rtp/gstrtpvrawpay.c: (gst_rtp_vraw_pay_setcaps):
Don't ignore the return value of set_outcaps.
Original commit message from CVS:
* gst/autodetect/gstautoaudiosrc.c:
(gst_auto_audio_src_class_init):
* gst/autodetect/gstautovideosrc.c:
(gst_auto_video_src_class_init):
Fix "Since" tags in the documentation.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_reset),
(gst_matroska_mux_request_new_pad), (gst_matroska_mux_release_pad):
Fix a memory leak when pads are requested but the pipeline never
goes into PLAYING.
Correctly remove request pads, no matter if they have collected
data or not.
Fixes bug #557710.
Original commit message from CVS:
Patch by: <lrn1986 at gmail dot com>
* gst/udp/gstudpnetutils.h:
Define the correct WINVER so getaddinfo() can be used when using
mingw32. Fixes bug #557294.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (update_coefficients):
Don't calculate the filter coefficients for every single buffer
but only when it's needed. Fixes bug #557260.
Original commit message from CVS:
* gst/avi/gstavimux.c:
Fix VPRP chunk setup in avimux.
Fixes: #556010
Patch By: Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
Original commit message from CVS:
* gst/videobox/gstvideobox.c:
support dynamically changing properties in videobox
Fixed: #557085
Patch By: Wim Taymans <wim.taymans@collabora.co.uk>
