Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_init), (gst_selector_pad_set_property),
(gst_selector_pad_get_property), (gst_selector_pad_event),
(gst_selector_pad_bufferalloc), (gst_selector_pad_chain),
(gst_input_selector_set_active_pad):
Add pad property to configure behaviour of the unselected pad, it can
return OK or NOT_LINKED, based on the use case.
Original commit message from CVS:
* gst/selector/gstinputselector.c:
(gst_selector_pad_get_running_time), (gst_selector_pad_reset),
(gst_selector_pad_event), (gst_selector_pad_bufferalloc),
(gst_input_selector_wait), (gst_selector_pad_chain),
(gst_input_selector_class_init), (gst_input_selector_init),
(gst_input_selector_dispose), (gst_segment_set_start),
(gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_get_linked_pad),
(gst_input_selector_is_active_sinkpad),
(gst_input_selector_activate_sinkpad),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_change_state), (gst_input_selector_block),
(gst_input_selector_switch):
* gst/selector/gstinputselector.h:
Figure out the locking a bit more.
Mark buffers with discont after switching.
Fix initial segment forwarding, make sure to only forward one segment
regardless of what the sequence of buffers/segments is. See #522203.
Improve flushing when blocked.
Return NOT_LINKED when a stream is not selected.
Not API change for the switch signal in the docs.
Fix start/time/accum values of the new segment.
Correctly unlock and flush a blocking selector when going to READY.
Original commit message from CVS:
* gst/freeze/FAQ:
* gst/freeze/Makefile.am:
* gst/freeze/gstfreeze.c:
Add example to source code documentation blob and remove the 3 line
FAQ.
* gst/interleave/interleave.c:
Add a source code documentation blob.
Original commit message from CVS:
* ext/ofa/gstofa.c: (create_fingerprint), (gst_ofa_event),
(gst_ofa_transform_ip), (plugin_init):
Improve debugging, clean up a bit and really generate the fingerprint
after 135 seconds.
Original commit message from CVS:
Based on a patch by: Eric Buehl <eric dot buehl at gmail dot com>
* configure.ac:
* ext/ofa/Makefile.am:
* ext/ofa/gstofa.c: (gst_ofa_base_init), (gst_ofa_finalize),
(gst_ofa_class_init), (create_fingerprint), (gst_ofa_event),
(gst_ofa_init), (gst_ofa_transform_ip), (gst_ofa_get_property),
(plugin_init):
* ext/ofa/gstofa.h:
Add an OFA element, the successor of MusicBrainz TRM fingerprinting.
Fixes bug #351309.
Original commit message from CVS:
2008-03-18 Andy Wingo <wingo@pobox.com>
* ext/faad/gstfaad.c (gst_faad_chain): Fix a bad format argument,
and a potential int overflow.
* ext/faad/gstfaad.h: Include <neaacdec.h> if faad is neaac.
Avoids a #warning about an ignored #pragma.
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_send_request_and_redirect):
Handle HTTP status code 303 (See Other) the same way
as 302 (Found). Not sure what to do about all the other 3xx
redirect status codes. Fixes bug #522884.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_event),
(gst_selector_pad_bufferalloc), (gst_selector_pad_chain),
(gst_input_selector_class_init),
(gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_push_pending_stop):
Add lots of debugging.
Fix time member in the newsegment event.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_finalize), (gst_selector_pad_get_property),
(gst_selector_pad_event), (gst_input_selector_class_init),
(gst_input_selector_init), (gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_push_pending_stop),
(gst_input_selector_switch):
* gst/selector/gstinputselector.h:
Various cleanups.
Added tags to the pads.
Select active pad based on the pad object instead of its name.
Fix refcount in set_active_pad.
Add property to get the number of pads.
* gst/selector/gstoutputselector.c:
(gst_output_selector_class_init),
(gst_output_selector_set_property),
(gst_output_selector_get_property):
Various cleanups.
Select the active pad based on the pad object instead of its name.
Fix locking when setting the active pad.
* gst/selector/gstselector-marshal.list:
* tests/check/elements/selector.c: (cleanup_pad),
(selector_set_active_pad), (run_input_selector_buffer_count):
Fixes for pad instead of padname for pad selection.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_init),
(gst_soup_http_src_finished_cb), (gst_soup_http_src_response_cb),
(gst_soup_http_src_build_message), (gst_soup_http_src_create):
* ext/soup/gstsouphttpsrc.h:
Try to resume on server disconnect. Fixes bug #522134.
Original commit message from CVS:
Based on patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(rtcp_thread), (start_rtcp_thread), (stop_rtcp_thread),
(join_rtcp_thread), (gst_rtp_session_change_state):
Avoid a deadlock when joining the RTCP thread in PAUSED because it might
be blocked downstream. Also avoid spawning multiple rtcp threads.
Fixes#520894.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic@users.sf.net>
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Don't try to reset the clock skew when we have no timestamps.
Fixes#519005.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* ext/faad/gstfaad.c: (looks_like_valid_header):
Improve the header checking to look for what faad2 looks
for too. Fixes playback of same apple trailers.
Fixes bug #469979.
Original commit message from CVS:
* configure.ac:
Really check for libdc1394 >= 2.0.0, pkg-config thinks that
2.0.0-rcX is newer than 2.0.0 so we check for this too.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* configure.ac:
Clean up detection of different mjpegtoolsAPI versions.
* ext/mpeg2enc/gstmpeg2enc.cc:
* ext/mpeg2enc/gstmpeg2enc.hh:
* ext/mpeg2enc/gstmpeg2encoder.cc:
* ext/mpeg2enc/gstmpeg2encoptions.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.hh:
* ext/mpeg2enc/gstmpeg2encstreamwriter.cc:
* ext/mpeg2enc/gstmpeg2encstreamwriter.hh:
Streamline conditional code for evolving mjpegtools API,
optimize and fix/prevent crash in log handling, use
names/nicks for enums in the usual way andm inor updates
in code and properties/settings. Partially fixes bug #520329.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Add parsing of cable delivery system descriptor.
Original commit message from CVS:
* configure.ac:
Use AG_GST_CHECK_PLUGIN and AG_GST_DISABLE_PLUGIN to simplify which
plug-ins are included/excluded. (#498222)
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx dot net>
* gst/mve/gstmvedemux.c: (gst_mve_audio_data),
(gst_mve_demux_get_type):
Fix audio discontinuity that happens when silent chunks are
followed by real data again. Fixes bug #519905.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
* sys/dvb/parsechannels.c:
Add DVB-C support. Special thanks to Christian Schaller
for a testing ground.
Original commit message from CVS:
* gst/mpegtsparse/mpegtsparse.c:
Only send PMTs to program pads that the PMT is for even if
on same pid.
As a by-product, we now no longer hardcode any psi pid numbers.
Also remove pcr stream from old pmt when we apply a new pmt.
Original commit message from CVS:
Map Date-Time and GPS tags and Convert from EXIF to XMP Datatime as local time (those changes has been done in previous comit but had to be revert in 2008-02-10 due to frozen)
Original commit message from CVS:
* sys/dvb/camutils.c:
Don't free the program descriptors, this structure
containing them is stills tored after.
Fixes data corruption.
Original commit message from CVS:
Patch by: Daniel Fischer <dan at f3c dot com>
* configure.ac:
* ext/dc1394/gstdc1394.c: (gst_dc1394_change_state),
(gst_dc1394_get_cam_caps), (gst_dc1394_open_cam_with_best_caps):
* ext/dc1394/gstdc1394.h:
Add support for libdc1394 2.0.0 and above and require this version
now. Fixes bug #514964.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_class_init),
(gst_soup_http_src_init), (gst_soup_http_src_dispose),
(gst_soup_http_src_set_property), (gst_soup_http_src_get_property),
(gst_soup_http_src_create):
* ext/soup/gstsouphttpsrc.h:
* tests/check/elements/souphttpsrc.c: (run_test), (GST_START_TEST),
(souphttpsrc_suite):
Add support for specifying a list of cookies to be passed in
the HTTP request. Fixes bug #518722.
Original commit message from CVS:
* gst/selector/gstinputselector.c:
* gst/selector/gstinputselector.h:
Added "select-all" property to make it work like aggregator in 0.8.
* gst/selector/gstoutputselector.c:
Fix resend-latest behavoiur.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/selector.c:
Add unit tests for selector.
Original commit message from CVS:
* configure.ac:
* ext/timidity/gsttimidity.c: (plugin_init):
* ext/timidity/gstwildmidi.c: (plugin_init):
Remove midi typefinders and require base CVS as they moved there.
Original commit message from CVS:
Patch by: Emilio Pozuelo Monfort <pochu at ubuntu dot com>
* ext/Makefile.am:
Build the wildmidi plugin if it's enabled and not only when
both, the timidity and wildmidi plugin, are enabled.
Original commit message from CVS:
* configure.ac:
* ext/mpeg2enc/Makefile.am:
* ext/soundtouch/Makefile.am:
* gst/modplug/Makefile.am:
Check for and define ERROR_CXXFLAGS and GST_CXXFLAGS and use them
when building C++ code.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Add initial support for multiproto driver (not yet merged into
v4l-dvb mainline yet).
Only works for DVB-S not DVB-S2, DVB-T, DVB-C or other.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/inspect/plugin-gdp.xml:
* docs/plugins/inspect/plugin-quicktime.xml:
* docs/plugins/inspect/plugin-switch.xml:
* docs/plugins/inspect/plugin-videocrop.xml:
Remove docs for elements that have moved to other modules
or been renamed.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* configure.ac:
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_cancel_message),
(gst_soup_http_src_finished_cb), (gst_soup_http_src_chunk_free),
(gst_soup_http_src_chunk_allocator),
(gst_soup_http_src_got_chunk_cb), (gst_soup_http_src_create),
(gst_soup_http_src_start), (gst_soup_http_src_set_proxy):
* ext/soup/gstsouphttpsrc.h:
Implement zero-copy and make the buffer size configurable.
Prefix proxy URIs with "http://" if they don't start with it
already and catch errors earlier, fixes hanging in some situations.
Fixes bug #514948.
Original commit message from CVS:
* tests/check/gst-plugins-bad.supp:
Add suppressions for SoundTouch valgrind warnings and
a valgrind warning caused by the LADSPA sine plugin and
happening on every exit().
Remove GIO suppressions as it's now in -base.
Original commit message from CVS:
* ext/mythtv/gstmythtvsrc.c: (gst_mythtv_src_create):
Don't allocate and copy the data to a new place but instead
put the data from gmyth (which we own) into the buffers that
are passed downstream.
Original commit message from CVS:
Based on a patch by:
Hans de Goede <j dot w dot r dot degoede at hhs dot nl>
* configure.ac:
* ext/mpeg2enc/gstmpeg2enc.cc:
Remove hack to work with mjpegtools 1.9.0rc3 and above and instead
use mjpeg_loglev_t() for getting the log levels. Check for this
function in configure.ac as the pkg-config file doesn't tell us
which release candidate we have. Fixes bug #517896.
Original commit message from CVS:
* tests/check/Makefile.am:
Ignore some more elements for the states unit test, like
dfbvideosink which produces a segfault. Fixes bug #517854.
Original commit message from CVS:
2008-02-20 Bastien Nocera <hadess@hadess.net>
* ext/mythtv/gstmythtvsrc.c: (gst_mythtv_src_do_seek),
(gst_mythtv_src_start): Using the wrong GstFormat for the filesize,
and fail seek properly on anything but _BYTES format
Fixes bug #517684
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate):
Ignore streams that did not receive an SR packet when doing
synchronisation. Fixes#516160.
Original commit message from CVS:
* gst/dvdspu/gstdvdspu.c: (gst_dvd_spu_handle_new_spu_buf):
Set n_line_ctrl_i to 0 whenever we free line_ctrl_i. Patch based
on an idea by Jan Schmidt, fixes bug #516436.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.c:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtsparse.c:
Make sure the gstmpegdesc debug lines do not critical
when GST_DEBUG is enabled and also actually output.
Thanks to Alessandro Decina for spotting.
Fixes#516448
Original commit message from CVS:
* configure.ac:
Generate the directshow Makefiles so that the directories
get disted. Still needs some configure time detection to enable
building them under MingW.
Original commit message from CVS:
* ext/metadata/Makefile.am:
Don't install a header file. We will have to merge these
tags into libgsttag after the release and use them from there.
Fixes: #515860
Original commit message from CVS:
* gst-libs/gst/dshow/Makefile.am:
* sys/dshowdecwrapper/Makefile.am:
* sys/dshowsrcwrapper/Makefile.am:
Add Makefiles to win32 plugins and lib.
They will need to be tested and probably fixed by developers
working with mingw. This is a first step to include source files
with releases.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/inspect/plugin-gio.xml:
Remove documentation for the GIO plugin as it was moved to
gst-plugins-base. Fixes bug #515964.
Original commit message from CVS:
* ext/xvid/gstxvidenc.c:
* gst/vmnc/vmncdec.c:
* sys/glsink/glimagesink.c:
* sys/glsink/gstgldisplay.c:
Fix some finalize leaks by chaining up to the parent method.
Original commit message from CVS:
* sys/fbdev/gstfbdevsink.c: (gst_fbdevsink_class_init),
(gst_fbdevsink_finalize):
Free the device string in finalize. Fixes bug #515722.
Original commit message from CVS:
* gst/selector/Makefile.am:
Listing the marshal.h in the nodist_HEADERS breaks distcheck, so
let's not do that
* tests/check/Makefile.am:
Disable the crashing cdaudio plugin from the states test so I can make
pre-releases.
Original commit message from CVS:
* sys/dvb/Makefile.am:
* sys/dvb/dvbbasebin.c:
Add URI Handler for dvb.
Re-order pad templates to workaround a bug in playbasebin.
* sys/dvb/parsechannels.c:
* sys/dvb/parsechannels.h:
Add code to parse channels from zap-style channels.conf files.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
* gst/multifile/gstmultifilesrc.c:
Use g_file_[sg]et_contents() instead of using stdio functions.
Should be less error prone.
* tests/check/elements/multifile.c:
Create a temporary directory using standard functions instead of
creating a directory in the current dir.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
Remove equalizer plugin docs
* tests/check/Makefile.am:
Add GST_OPTION_CFLAGS, to get -Werror -Wall into the tests as for
other modules.
* tests/check/elements/multifile.c:
* tests/check/elements/rganalysis.c:
* tests/check/elements/rglimiter.c:
Fix compiler warnings from -Wall -Werror
Original commit message from CVS:
* configure.ac:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/inspect/plugin-xingheader.xml:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c:
* gst/xingheader/gstxingmux.h:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/xingmux.c:
* tests/check/elements/xingmux_testdata.h:
Remove the xingmux plugin, as the element has moved into
mpegaudioparse in -ugly.
Original commit message from CVS:
* ext\neon\gstneonhttpsrc.c:
Include unistd.h only if _HAVE_UNISTD_H is defined
* gst\mpegvideoparse\mpegvideoparse.c:
Use G_GUINT64_CONSTANT GLIB macro for constant
* sys\dshowsrcwrapper\gstdshowaudiosrc.c:
* sys\dshowsrcwrapper\gstdshowvideosrc.c:
* sys\dshowdecwrapper\gstdshowaudiodec.c:
* sys\dshowdecwrapper\gstdshowaudiodec.h:
* sys\dshowdecwrapper\gstdshowdecwrapper.c:
* sys\dshowdecwrapper\gstdshowdecwrapper.h:
* sys\dshowdecwrapper\gstdshowvideodec.c
* sys\dshowdecwrapper\gstdshowvideodec.h:
Add a DirectShow decoder wrapper.
* win32\MANIFEST:
Add new win32 files to MANIFEST
* win32\vs6\gst_plugins_bad.dsw:
* win32\vs6\libgstdshow.dsp:
* win32\vs6\libgstdshowdecwrapper.dsp:
* win32\vs6\libgstflv.dsp:
Add new projects to bad workspace
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Parse component descriptor.
* gst/mpegtsparse/mpegtsparse.c:
Add SI pids to every program (but hardcoded currently).
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
Add a fixme comment.
* gst/selector/gstoutputselector.c:
Fix same leak as in input-selector.
* tests/icles/output-selector-test.c:
Improve the test.
Original commit message from CVS:
* configure.ac:
The dc1394 plugin seems to use API that was removed or changed
before the final 2.0.0 release, so only build it if 2.0.0-rc5
is available. Someone needs to port it to the final API.
* ext/dc1394/gstdc1394.c: (gst_dc1394_change_camera_transmission):
Include string.h for memcpy and use g_usleep instead of usleep.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (gst_soup_http_src_got_chunk_cb),
(gst_soup_http_src_create):
Fix memory leak and improve debugging a bit.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Add flag to both sdt and nit structures to say
whether the table is for the actual network/ts
or not.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init),
(gst_ladspa_class_init), (ladspa_describe_plugin), (plugin_init):
Don't use GST_BOILERPLATE as the stuff generated from it is not used
anyway and can't be used.
Store the class struct of the correct type in parent_class.
Pass the LADSPA_Descriptor as class_data to the class_init function
as preparation for the time, when we can add pad templates and friends
in class_init and add a FIXME for that.
Don't use a custom hash table for passing the LADSPA_Descriptors to
base_init but use g_type_set_qdata and g_type_get_qdata.
Original commit message from CVS:
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
Really fix the build.
TODO : Apply spankOmatic2000 on thaytan's rear end.
Original commit message from CVS:
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
(GstMpeg2EncPictureReader.StreamPictureParams):
Fix compilation with libmjpegtools 1.8.x.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c:
(gst_signal_processor_class_add_pad_template):
Don't unref the pad template after adding it.
gst_element_class_add_pad_template takes ownership of it.
Original commit message from CVS:
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
Use the incoming pixel-aspect-ratio if provided to infer a
default aspect ratio, which can be overridden using the 'aspect'
property.
Fixes: #499008
Original commit message from CVS:
Patch by: Andrzej Mendel <andrzej dot mendel at gmail dot com>
* configure.ac:
Fix variable naming to make it possible to build the glimagesink
plugin. Fixes bug #514093.
Original commit message from CVS:
* ext/metadata/gstmetadatademux.c:
Demote metadatademux to GST_RANK_NONE for the release, it's not
ready to be autoplugged yet.
* tests/icles/metadata_editor.c:
Fix printf format warning for GType on ppc32 by removing it,
since it doesn't make sense to print the GType value anyway.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_event):
Don't leak event on pads that are not linked. Fixes#512826.
Original commit message from CVS:
* configure.ac:
Bump core/base requirements to released versions, to avoid confusion.
* gst/deinterlace/Makefile.am:
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_set_caps):
Use the new GstVideoFormat API to get strides, plane offsets etc..
For Y42B we still need to calculate these ourselves, since the lib
in -base doesn't know about this format yet and we can't bump the
requirement to CVS right now. Fix the Y42B stride, offset and size
calculations for odd widths and heights while we're at it though
(to match those in videotestsrc).
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_sink_dispose):
Really clean up the queue instead of just unreffing all buffers
in it.
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_base_init),
(gst_app_src_class_init), (gst_app_src_init),
(gst_app_src_dispose), (gst_app_src_finalize):
Fix dispose/finalize.
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_chanpos_to_gst):
Fix compiler warning by making the function signature match what
everyone is passing in...
* tests/icles/Makefile.am:
Fix the build on Solaris by removing GNU ld specific flags that
look unnecessary.
Original commit message from CVS:
* configure.ac:
* ext/metadata/metadataxmp.c:
(metadatamux_xmp_for_each_tag_in_list):
Fix build with exempi >= 1.99.5 and fix the include
path for exempi.
Original commit message from CVS:
* ext/gio/gstgiobasesink.c: (close_stream_cb),
(gst_gio_base_sink_stop), (gst_gio_base_sink_event),
(gst_gio_base_sink_render), (gst_gio_base_sink_set_stream):
* ext/gio/gstgiobasesrc.c: (close_stream_cb),
(gst_gio_base_src_stop), (gst_gio_base_src_create),
(gst_gio_base_src_set_stream):
Use async variants of the close stream functions to prevent blocking
for a long time there and add some more sanity checks for a correct
stream.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (gst_souphttp_src_init):
Let the proxy property default to the content of the $http_proxy
environment variable.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* tests/check/test-cert.pem:
* tests/check/test-key.pem:
Add missing files for the unit test.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir at gmail dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Try to get the new clock-rate from the buffer caps when we receive a new
payload type instead of always firing the signal. Fixes#512774.
Original commit message from CVS:
* ext/mpeg2enc/gstmpeg2enc.cc:
Define LOG_NONE and friends if they're not defined yet. mjpegtools
1.9.0rc3 removed their definitions but without it doesn't make much
sense to write a log handler.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.types:
Add base classes for metadata and equalizer (no introspection yet).
Original commit message from CVS:
* gst/h264parse/gsth264parse.c: (gst_h264_parse_chain_forward):
Try to avoid 'unused variable' compiler warning if debugging is
disabled (not bullet proof, but seems to do for now). (#512654)
Original commit message from CVS:
* ext/soundtouch/gstbpmdetect.cc:
Clean up a bit and only allocate a temporary buffer for the data
if processing stereo data as BPMDetect downmixes from stereo to
mono and stores the result in the input data. Thanks to
Stefan Kost for the suggestions.
Original commit message from CVS:
* ext/soundtouch/gstpitch.cc:
* ext/soundtouch/gstpitch.hh:
Implement LATENCY query and notify about latency changes.
Unfortunately we don't have a fixed latency but it changes
a bit with each buffer so we only send an LATENCY event with
the maximum latency if it changes.
Always calculate the timestamp, duration, etc from the sample
rate instead of using a pre-calculated duration for one sample
to prevent large rounding errors.
Original commit message from CVS:
Based on a patch by:
Hans de Goede <j dot w dot r dot degoede at hhs dot nl>
* configure.ac:
* ext/mpeg2enc/gstmpeg2encoder.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.hh:
Add support for building against mjpegtools 1.9 while keeping
compatiblity with older versions.
Original commit message from CVS:
* ext/soundtouch/Makefile.am:
* ext/soundtouch/gstbpmdetect.cc:
* ext/soundtouch/gstbpmdetect.hh:
* ext/soundtouch/plugin.c: (plugin_init):
Add BPM detection plugin based on SoundTouch's libBPM.
* ext/soundtouch/gstpitch.cc:
Allow sample rates until MAX instead of only 48kHz and remove the
buffer-frames field from that caps.
Clear the remaining samples completely when necessary to get into
a clean state again.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init):
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init):
Don't implement get_unit_size() ourselves, the GstAudioFilter base
class already does this for us.
Original commit message from CVS:
* ext/soundtouch/gstpitch.cc:
Allow seeking only in TIME and DEFAULT format, other formats will
not work as expected. Also handle a stop position of -1 correctly
for seeks, newsegment events and the queries. This fixes playback
with the pitch element if upstream doesn't know the duration or has
-1 as stop position in NEWSEGMENT events for other reasons. Before
simply nothing was played as the segment was going from 0 to 0.
Send a GST_MESSAGE_DURATION whenever the rate or tempo is changed
so applications can update their cached duration. Fixes bug #503308.
Some random cleanup and memory leak closing.
Original commit message from CVS:
* ext/musepack/gstmusepackdec.h:
* ext/musepack/gstmusepackreader.c:
First include the libmpcdec headers before everything else as they
#define TRUE and FALSE unconditionally and we otherwise get conflicts
with the ones that GLib defines.
Original commit message from CVS:
* configure.ac:
* ext/soundtouch/gstpitch.cc:
Add support for libsoundtouch 1.3.1 and add an ugly workaround for
the header definined PACKAGE and other variables for which we need
our own values from config.h.
Original commit message from CVS:
* configure.ac:
Check for libglade-2.0, for the metadata-editor example.
* tests/icles/Makefile.am:
Only try to build the metadata-editor example if we have gtk and
glade (otherwise the build would just fail ...); fix build in
uninstalled setup.
* tests/icles/metadata_editor.c: (on_cell_edited), (ui_add_columns):
Fix compiler warnings (use GLib macros to cast pointer <-> int).
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(create_stream), (payload_type_change), (new_ssrc_pad_found):
Also handle lip-sync when the clock-rate is not provided with caps but
with a signal.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the fixed clock-rate from the jitterbuffer and extend it so that
a clock-rate can be provided with each buffer instead. Fixes#511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_change_state),
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Remove old unused variable.
Track pt on input buffers and get the clock-rate when it changes.
Ignore packets with unknown clock-rate. See #511686.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Post bus message about adapter type and it's capabilities,
when opening the frontend.
After failing to read from the dvr, post a bus message to
inform the app.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/rtpsource.c: Fix unref of buffer using the
wrong function. Fixes#511920
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.prerequisites:
* docs/plugins/gst-plugins-bad-plugins.signals:
Now we have full hierarchy.
* docs/plugins/inspect/plugin-metadata.xml:
Regenerate.
* ext/amrwb/gstamrwbdec.h:
Add doc blob for object instance.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/inspect/plugin-metadata.xml:
Update this too, hopefully fixes the docs build (does at least
for me, after make clean in docs/plugins).
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Fix network name descriptor, the length is actually the
descriptor length not stored in the byte after.
Fix bounds checking to be more correct.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Parse and add to relevant bus messages the terrestrial delivery
system descriptor and the logical channel descriptor.
Do bounds checking on data stored in descriptor before use.
Original commit message from CVS:
* configure.ac:
* ext/dts/gstdtsdec.c:
Add support for building against libdca (with the libdts compat
header). Fixes bug #511530.
Should probably be ported to libdca as some points as it's the
successor of libdts.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Do not go on forever if problem with reading from dvr, rather
return NULL.
Handle some cleanup issues of closing filedescriptors when
failing to tune or similar.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* gst/xingheader/gstxingmux.c:
* gst/xingheader/gstxingmux.h:
Add documentation for the xingheader plugin.
* tests/check/elements/xingmux.c: (GST_START_TEST):
Set element state to PLAYING before doing something else.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/xingmux.c: (setup_xingmux),
(cleanup_xingmux), (GST_START_TEST), (xingmux_suite), (main):
* tests/check/elements/xingmux_testdata.h:
Add simple unit test for the xingmux element.
* gst/xingheader/gstxingmux.c: (generate_xing_header),
(gst_xing_mux_finalize), (xing_reset):
Fix a memleak and invalid seek tables with less than 100 MP3 frames.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Parsed the satellite delivery system descriptor and
added into nit's transport structure for delivery
over the bus.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Remove leaks introduced by not freeing g_strndup'd strings.
Fix start_time and duration parsing in EIT.
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/gstmpegdesc.c:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Added descriptor searching infrastructure from Fluendo TS demuxer.
Add channel name and provider to the sdt structure sent in the
bus message.
Original commit message from CVS:
2008-01-22 Julien Moutte <julien@fluendo.com>
* gst/h264parse/gsth264parse.c: (gst_h264_parse_chain_forward):
Parse NAL units in forward mode to mark delta units flags.
Original commit message from CVS:
* docs/plugins/Makefile.am:
Add missing eol \
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
Place object names to standard sectionas plugin dont document those.
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.signals:
* docs/plugins/inspect/plugin-dvb.xml:
* docs/plugins/inspect/plugin-nuvdemux.xml:
regenerate.
* ext/ivorbis/vorbisdec.c:
* ext/ivorbis/vorbisdec.h:
Mark private vars and add short desc.
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
Add short desc.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* gst/nuvdemux/gstnuvdemux.c:
One less to do. Its 'nuv' not 'nvu'. As an extra bonus I mention what
it actually is.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
Update lists again. Those whole can build ivorbisdec, mythtvsrc,
nvudemux and theoradecexp, please commit the inspect/plugin-xxx.xml.
* docs/plugins/inspect/plugin-gstinterlace.xml:
* docs/plugins/inspect/plugin-rawparse.xml
* docs/plugins/inspect/plugin-videoparse.xml:
Replace videoparse with rawparse.
* gst/dvdspu/gstdvdspu.h:
Help gtk-doc to recognize the object struct.
Original commit message from CVS:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
Don't use gtk-doc comment style for non gtk-doc comments.
Make one static function static.
Original commit message from CVS:
Patch by: Gabriel Bouvigne <bouvigne at mp3-tech dot org>
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_class_init),
(gst_deinterlace_init), (gst_deinterlace_set_caps),
(gst_deinterlace_transform_ip), (gst_deinterlace_set_property),
(gst_deinterlace_get_property):
* gst/deinterlace/gstdeinterlace.h:
Provide 4:2:2 support
Also deinterlace chroma planes
Allow to turn on/off deinterlacing
Change of default thresholds, in order to provide acceptable results
with default params. Fixes#511001.
Original commit message from CVS:
* gst/dvdspu/gstdvdspu-render.c: (gst_dvd_spu_render_spu):
* gst/dvdspu/gstdvdspu.c: (dvdspu_debug), (GST_CAT_DEFAULT),
(subpic_sink_factory), (gst_dvd_spu_base_init),
(gst_dvd_spu_class_init), (gst_dvd_spu_init), (gst_dvd_spu_clear),
(gst_dvd_spu_dispose), (gst_dvd_spu_finalize),
(gst_dvd_spu_flush_spu_info), (gst_dvd_spu_buffer_alloc),
(gst_dvd_spu_src_event), (gst_dvd_spu_video_set_caps),
(gst_dvd_spu_video_proxy_getcaps), (gst_dvd_spu_video_event),
(gst_dvd_spu_video_chain), (dvspu_handle_vid_buffer),
(gst_dvd_spu_redraw_still), (gst_dvd_spu_parse_chg_colcon),
(gst_dvd_spu_exec_cmd_blk), (gst_dvd_spu_finish_spu_buf),
(gst_dvd_spu_setup_cmd_blk), (gst_dvd_spu_handle_new_spu_buf),
(gst_dvd_spu_handle_dvd_event), (gst_dvd_spu_advance_spu),
(gst_dvd_spu_check_still_updates), (gst_dvd_spu_subpic_chain),
(gst_dvd_spu_subpic_event), (gst_dvd_spu_change_state),
(gst_dvd_spu_plugin_init):
* gst/dvdspu/gstdvdspu.h: (GST_TYPE_DVD_SPU):
Fix up dvdspu element again after previous namespace mangling:
rename debug category variable to old name, matching that in
dvdspu-render.c, to avoid undefined symbol error when loading
the module; same for the _render function in dvdspu-render.c:
we must use the same name in both .c files; change functions
now called gstgst_* back to gst_* again; and while we're at it,
we may as well canonicalise the namespace properly, namely to
gst_dvd_spu_*.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* ext/theora/theoradec.c:
* ext/theora/theoradec.h:
Coherent namespace usage and adding symbold from unused to sections.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
Add symbols from -unused.txt to the right place.
* gst/dvdspu/gstdvdspu.c:
* gst/dvdspu/gstdvdspu.h:
Coherent namespace usage.
* gst/spectrum/gstspectrum.c:
Fix broken XML fragment in doc snippet even more.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (soup_got_headers):
Report the size of the stream as the total size instead of
the remaining Content-Length, which is wrong after a seek.
Original commit message from CVS:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_push_buffer),
(gst_raw_parse_loop):
Handle framesizes > 4096 with multiple frames per buffer correctly
in pull mode and handle short reads better.
Also put offset and offset_end on outgoing buffers.
Original commit message from CVS:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_loop):
Improve handling of unknown or too small upstream sizes in
pull mode.
Original commit message from CVS:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_loop),
(gst_raw_parse_handle_seek_push):
Improve debugging a bit and for handling multiple frames per buffer
in pull mode choose the next smallest multiply of framesize below
4096 instead of always handling 1024 frames.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (soup_got_headers):
Correctly set duration on the GstBaseSrc segment when we know it
to fix failing the duration query.
Original commit message from CVS:
* gst/h264parse/gsth264parse.c: (gst_h264_parse_flush_decode),
(gst_h264_parse_queue_buffer), (gst_h264_parse_chain_reverse):
Set timestamps more correctly.
Original commit message from CVS:
* tests/check/Makefile.am:
Enable spectrum test again.
* tests/check/gst-plugins-bad.supp:
Add suppressions for a singleton in GIO that can't be freed.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/equalizer.c: (setup_equalizer),
(cleanup_equalizer), (GST_START_TEST), (equalizer_suite), (main):
Add some minimal tests for the equalizer plugin.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_finalize):
Unparent all bands from the equalizer when finalizing to stop
leaking them.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (gst_souphttp_src_class_init),
(gst_souphttp_src_init), (gst_souphttp_src_create),
(gst_souphttp_src_is_seekable), (gst_souphttp_src_do_seek),
(soup_add_range_header), (soup_got_headers), (soup_got_chunk):
* ext/soup/gstsouphttpsrc.h:
Add support for seeking to souphttpsrc. Fixes bug #502335.
Original commit message from CVS:
* configure.ac:
* tests/check/pipelines/gio.c: (GST_START_TEST):
Update for API changes in GIO and require GIO 2.15.2 for this.
Original commit message from CVS:
* gst/xingheader/gstxingmux.c: (generate_xing_header):
Bitrate is 4 bits, not 8 so check for 0xe as maximum value instead
of 0xfe.
Original commit message from CVS:
* gst/xingheader/gstxingmux.c: (has_xing_header),
(generate_xing_header), (gst_xing_mux_chain),
(gst_xing_mux_sink_event):
Choose smallest possible frame size for the Xing header, properly
set the timestamp, duration and offset on the outgoing buffers,
only send NEWSEGMENT events in BYTE format downstream and also
drop VBRI headers if already existing.
Original commit message from CVS:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c: (parse_header), (get_xing_offset),
(has_xing_header), (generate_xing_header),
(gst_xing_mux_base_init), (gst_xing_mux_finalize), (xing_reset),
(gst_xing_mux_init), (gst_xing_mux_chain),
(gst_xing_mux_sink_event), (gst_xing_mux_change_state):
* gst/xingheader/gstxingmux.h:
Major cleanup and rewrite of xingmux with less bugs and new features:
- Handles other layers as 3
- Write TOC
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_util_find_start_code):
Small meaningless cleanup.
* gst/mpegvideoparse/mpegvideoparse.c: (gst_mpegvideoparse_flush),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain_forward),
(scan_keyframe), (gst_mpegvideoparse_flush_decode),
(gst_mpegvideoparse_chain_reverse), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (gst_mpegvideoparse_change_state):
* gst/mpegvideoparse/mpegvideoparse.h:
Track segment events.
Do the first part of reverse playback by sending data between two
I-frames to the decoder.
Original commit message from CVS:
* autogen.sh:
Add -Wno-portability to the automake parameters to stop warnings
about GNU make extensions being used. We require GNU make in almost
every Makefile anyway.
* configure.ac:
Use AM_PROG_CC_C_O as a compiler that accepts both -c and -o
at the same time is required for per target flags.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* Makefile.am:
Include lcov.mak to allow building coverage reports. Add top-level
check targets similar to other gst packages.
Original commit message from CVS:
* ext/directfb/Makefile.am:
Add GST_CFLAGS. Otherwise we don't get -Wall -Werror.
* ext/directfb/dfbvideosink.c:
Getting tired of directfb's chatter. Quiet it.
Original commit message from CVS:
* configure.ac:
* ext/gio/gstgiobasesrc.c: (gst_gio_base_src_get_size):
* tests/check/pipelines/gio.c: (free_input), (GST_START_TEST):
Update to GMemoryInputStream API changes in GLib SVN and require
gio-2.0 >= 2.15.1 for this. Fixes bug #507584.
We can also report the duration for every GSeekable, not only
GFileInputStream and GMemoryInputStream.
Original commit message from CVS:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldisplay.c:
* sys/glsink/gstgldisplay.h:
* sys/glsink/gstglupload.c:
Handle xoverlay exposes correctly. This means glimagesink works
correctly most of the time in totem (fullscreening being an
execption). Doesn't handle expose events directly to the GL
window.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* tests/check/Makefile.am:
Disable vcdsrc in states test because it takes too much time
to get to PLAYING if it can find a device.
Original commit message from CVS:
* ext/musicbrainz/gsttrm.c:
Don't emit signiture when going to READY, because it might
not be ready.
* ext/nas/nassink.c:
Remove useless call that sleeps for 5 seconds. Yup, it calls
sleep(1) 5 times. Go NAS.
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfbdecoder.c:
Initialize our debug categories properly.
* gst/rawparse/gstrawparse.c:
Don't register element details for a non-element. Be much more
rude when subclass doesn't set a pad template (assert!). Don't
unref the pad template; we don't own it.
* gst/videosignal/gstvideoanalyse.c:
Initialize debug category.
* tests/check/Makefile.am:
Ignore nassink element in tests because it has unavoidable
long timeouts.
Original commit message from CVS:
* configure.ac:
* sys/glsink/Makefile.am:
Switch to using pkgconfig to detect libGL. Since we use
recent features added to Mesa, there's no point in adding
a check for pre-pkgconfig versions.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_get_property):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_show_frame):
* gst/mve/gstmvemux.c: (gst_mve_mux_request_new_pad):
* sys/dvb/dvbbasebin.c: (dvb_base_bin_class_init):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x and don't
abort() in any case but properly report the error.
Original commit message from CVS:
* ext/soup/Makefile.am:
* ext/soup/gstsouphttpsrc.c: (gst_souphttp_src_get_property),
(gst_souphttp_src_unicodify), (soup_got_headers):
Use gst_tag_freeform_string_to_utf8() and post radio station
info as tags on the bus.
Original commit message from CVS:
* sys/glsink/glimagesink.c:
* sys/glsink/gstglupload.c:
Change glimagesink over to using GL buffers. This breaks
glimagesink for normal operation, but should be fixed soon.
Original commit message from CVS:
* sys/glsink/gltestsrc.c:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglfilterexample.c:
* sys/glsink/gstgltestsrc.c:
* sys/glsink/gstglupload.c:
Convert gldownload to BaseTransform. Make glfilterexample
visually interesting. Add support for various formats to
downloading. Fix a few places where we leak GL state to
other elements (bad, but hard to prevent).
Original commit message from CVS:
* sys/glsink/BUGS:
* sys/glsink/Makefile.am:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstglconvert.c:
* sys/glsink/gstgldisplay.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglfilter.h:
* sys/glsink/gstglfilterexample.c:
* sys/glsink/gstgltestsrc.c:
* sys/glsink/gstglupload.c:
* sys/glsink/gstopengl.c:
Remove code that handles non-texture buffers. Add a
GstGLBufferFormat type that corresponds to how to use the
texture, not the original video format. Convert gstflfilter.c
into a base class, add glfilterexample and glconvert elements.
* sys/glsink/color_matrix.c:
Minor ramblings about color conversion matrices.
Original commit message from CVS:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
Clean up code. Fix a few leaks.
Original commit message from CVS:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglupload.c:
Rewrite a bunch of code to use textures as the intermediate
instead of renderbuffers. upload, download, filtering all
work.
Original commit message from CVS:
* gst/videoparse/Makefile.am:
* gst/videoparse/README:
* gst/videoparse/gstvideoparse.c:
Remove videoparse element, because it was moved to gst/rawparse/
Original commit message from CVS:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_src_event):
Always seek on frame boundaries, will produce nothing useful
otherwise.
Original commit message from CVS:
* configure.ac:
* gst/rawparse/Makefile.am:
* gst/rawparse/README:
* gst/rawparse/gstaudioparse.c: (gst_audio_parse_format_get_type),
(gst_audio_parse_endianness_get_type), (gst_audio_parse_base_init),
(gst_audio_parse_class_init), (gst_audio_parse_init),
(gst_audio_parse_set_property), (gst_audio_parse_get_property),
(gst_audio_parse_update_frame_size), (gst_audio_parse_get_caps):
* gst/rawparse/gstaudioparse.h:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_base_init),
(gst_raw_parse_class_init), (gst_raw_parse_init),
(gst_raw_parse_dispose),
(gst_raw_parse_class_set_src_pad_template),
(gst_raw_parse_class_set_multiple_frames_per_buffer),
(gst_raw_parse_reset), (gst_raw_parse_chain),
(gst_raw_parse_convert), (gst_raw_parse_sink_event),
(gst_raw_parse_src_event), (gst_raw_parse_src_query_type),
(gst_raw_parse_src_query), (gst_raw_parse_set_framesize),
(gst_raw_parse_set_fps), (gst_raw_parse_get_fps),
(gst_raw_parse_is_negotiated):
* gst/rawparse/gstrawparse.h:
* gst/rawparse/gstvideoparse.c: (gst_video_parse_format_get_type),
(gst_video_parse_endianness_get_type), (gst_video_parse_base_init),
(gst_video_parse_class_init), (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property),
(gst_video_parse_format_to_fourcc),
(gst_video_parse_update_frame_size), (gst_video_parse_get_caps):
* gst/rawparse/gstvideoparse.h:
* gst/rawparse/plugin.c: (plugin_init):
Add new plugin rawparse that contains a base class for raw data
parsers and the two elements audioparse and videoparse that can
be used to parse raw audio and video. These are inspired by the
old videoparse element which the new rawparse plugin deprecates.
Original commit message from CVS:
* sys/glsink/glextensions.c:
* sys/glsink/glextensions.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglupload.c:
A careful read of the documentation reveals that I can't use
renderbuffers as textures. Duh. Checkpoint because I'm about
to rewrite a bunch of code.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glextensions.c:
* sys/glsink/glextensions.h:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglupload.c:
* sys/glsink/gstopengl.c:
Switch to using framebuffer_objects instead of GLXPixmaps,
because that's what my driver supports. Remove GLDrawable,
since GstGLDisplay now has a default drawable and context.
Original commit message from CVS:
2007-12-18 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (enum, gst_selector_pad_class_init)
(gst_selector_pad_get_property)
(gst_selector_pad_get_running_time)
(gst_stream_selector_class_init, gst_segment_get_timestamp)
(gst_segment_set_stop, gst_segment_set_start)
(gst_stream_selector_set_active_pad, gst_stream_selector_block)
(gst_stream_selector_push_pending_stop)
(gst_stream_selector_switch): Change so that the signals and
properties deal in running time, not buffer time. Document the
signals more. Change uint64 in API to int64, to reflect what's in
GstSegment.
Original commit message from CVS:
* Makefile.am:
Include common/win32.mak for CRLF check of win32 project
files (see #393626).
* configure.ac:
Bump requirements to -base CVS for libgstvideo additions in
glimagesink. Disable glimagesink until the missing files get
checked in.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstopengl.c:
* sys/glsink/gstglupload.c:
Use new GstVideoFormat checked into -base. Add new glupload
element to upload raw video into a GLXPixbuf. Untested. Will
likely crash your motorcycle if you try it.
* sys/glsink/gstvideo-common.c:
* sys/glsink/gstvideo-common.h:
Remove.
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c:
* gst/multifile/gstmultifilesrc.h:
When subsequent files are read, if the file doesn't exist, send
an EOS instead of causing an error.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_selector_pad_chain): Return OK when
a buffer is ignored, not NOT_LINKED. No sense in making a source
element error out; at least fdsrc considers NOT_LINKED to be a
fatal error. Patch 11/12. There is no patch 12/12. Foo.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (gst_stream_selector_class_init)
(gst_stream_selector_block): Make the block() signal return the
last stop time of the active pad. Patch 10/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_selector_pad_get_property)
(gst_selector_pad_class_init, gst_stream_selector_class_init)
(gst_stream_selector_get_property): Expose 'last-stop-time' as a
pad property, not an element property.
(gst_selector_pad_chain): Mark the last_stop time as timestamp +
duration, not timestamp. Patch 9/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_stream_selector_change_state)
(gst_stream_selector_block, gst_stream_selector_switch): Use the
cond mechanism instead of blocked pads. Patch 8/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelector):
* gst/switch/gstswitch.c (gst_stream_selector_wait)
(gst_selector_pad_chain, gst_stream_selector_init)
(gst_stream_selector_dispose): Add infrastructure for new blocking
mechanism that does not use gst_pad_set_blocked, which does not
work on sink pads. Patch 7/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelector): Add some
state variables.
* gst/switch/gstswitch.c (gst_stream_selector_push_pending_stop)
(gst_selector_pad_chain): Push any pending stop event.
(gst_stream_selector_set_active_pad)
(gst_stream_selector_set_property): Factor out setting the active
pad to a function. Close the segment of the previous active pad if
told to do so via a stop_time != GST_CLOCK_TIME_NONE.
(gst_stream_selector_switch): Implement switch vmethod. Patch 5/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_stream_selector_block): Implement
the block() signal. This implementation will be replaced in future
patches, however. Patch 4/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (gst_stream_selector_class_init): Add
`block' and `switch' signals.
* gst/switch/Makefile.am:
* gst/switch/gstswitch-marshal.list: Add foo to generate a
marshaller for the `switch' signal. Patch 2/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h:
* gst/switch/gstswitch.c: Replace with files from
gststreamselector.[ch], registered as the "switch" plugin, with
"GstSwitch" types. Patch 1/12.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glextensions.c:
* sys/glsink/glextensions.h:
* sys/glsink/glvideo.c:
Add vblank synchronization. Isn't really working on my
driver. :(
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstvideo-common.c:
* sys/glsink/gstvideo-common.h:
Add support for xRGB, xBGR, and AYUV. Re-add support for
power-of-2 textures.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_dispose),
(gst_video_parse_sink_event):
Free the adapter on dispose and correctly reset on newsegment events.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_sink_event),
(gst_video_parse_src_event), (gst_video_parse_src_query):
Improve duration query by first asking upstream and if it can't handle
the query try to get the duration in bytes from upstream and convert.
For seeks, try if upstream handles this already first and do our
conversion to byte format only if it doesn't and if we get a
newsegment event in time format keep it and only do our conversions
if the event has another format.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c:
(gst_video_parse_format_get_type),
(gst_video_parse_endianness_get_type),
(gst_video_parse_class_init), (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property),
(gst_video_parse_format_to_fourcc),
(gst_video_parse_update_block_size), (gst_video_parse_chain),
(gst_video_parse_sink_event):
Add support for video/x-raw-rgb and video/x-raw-gray. Also send
downstream elements downstream, not upstream.
Original commit message from CVS:
* sys/glsink/gstvideo-common.c:
* sys/glsink/gstvideo-common.h:
Pull together some common raw video functions into one location.
This should eventually move to -base.
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstopengl.c:
Use the new video-common.h stuff. Readd support for RGB video.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
Hash streams by pid again. Add a linked list inside each
stream with a list of sub_tables. Fix multiple sections
as it was borked with my last commit.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_init),
(gst_video_parse_src_event), (gst_video_parse_src_query_type):
Implement a query type function for the src pad, implement seeking
and use ANY caps for the sink pad as the element doesn't care what
caps the input has and everything is handled via properties.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_convert),
(gst_video_parse_sink_event):
Handle -1 values for the CONVERT query too.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_sink_event):
Add YV12 to the pad templates as it is supported too and allow
-1 as stop position for NEWSEGMENT events.
Original commit message from CVS:
* gst/videoparse/Makefile.am:
Add $(GST_PLUGINS_BASE_CFLAGS) to CFLAGS to fix the build.
* gst/videoparse/gstvideoparse.c: (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property):
Use g_value_[sg]et_enum() for enum properties, g_value_[sg]et_int()
gives a g_critical().
Original commit message from CVS:
* gst/videoparse/README:
* gst/videoparse/gstvideoparse.c:
Add a bunch of features: handle format specification, handle
queries and conversion. Works much like a normal parser now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_init),
(gst_dtsdec_sink_setcaps), (gst_dtsdec_chain_raw),
(gst_dtsdec_chain):
* ext/dts/gstdtsdec.h:
Add support for "audio/x-private1-dts" as used by flupsparse. Most
changes adapted from a52dec.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
Split out gl-related code into a separate file with a
sensible API. Major cleanup. Still crashes occasionally
due to different threads touching bits at the same time.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* ext/soup/gstsouphttpsrc.c: (_do_init),
(gst_souphttp_src_class_init), (gst_souphttp_src_init),
(gst_souphttp_src_dispose), (gst_souphttp_src_set_property),
(gst_souphttp_src_get_property), (unicodify),
(gst_souphttp_src_unicodify), (gst_souphttp_src_create),
(gst_souphttp_src_start), (gst_souphttp_src_stop),
(gst_souphttp_src_unlock), (gst_souphttp_src_unlock_stop),
(gst_souphttp_src_get_size), (gst_souphttp_src_is_seekable),
(soup_got_headers), (soup_got_body), (soup_finished),
(soup_got_chunk), (soup_response), (soup_parse_status),
(gst_souphttp_src_uri_get_type),
(gst_souphttp_src_uri_get_protocols),
(gst_souphttp_src_uri_get_uri), (gst_souphttp_src_uri_set_uri),
(gst_souphttp_src_uri_handler_init):
* ext/soup/gstsouphttpsrc.h:
Do not try to unpause I/O in the "queued" state.
Reorganise a bunch of things and cleanups.
Uses G_GUINT64_FORMAT instead of hard-coding %llu.
See #502335.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Don't strdup (and thus leak) codec name strings when passing
them to gst_tag_list_add().
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
Based on patch by: <mutex at runbox dot com>
* gst/videoparse/gstvideoparse.c: (gst_video_parse_src_query):
Forward the query upstream, the default element event handler does
something different. Fixes#502879.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Fix list of supported and known codecs.
Emit tag with the codec name so it gets properly reported in totem and
other applications.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
The transform() methods are not called in passthrough mode so
there's no need for checking if the element is in passthrough mode.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
Sync the GObject properties with the controller even in passthrough
mode to get consistent property values.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
A sub table is identified by the pair table_id and
sub_table_identifier, not by pid. So hash with that.
* sys/dvb/dvbbasebin.c:
Make sure initial pids are added properly to filter,
Original commit message from CVS:
2007-12-05 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_switch_set_property): Don't push
buffers from app thread when unsetting `queue-buffers', it's
dangerous and the chain function will do it for us anyway.
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Remove signals for pat, pmt, nit, eit, sdt. Replace with bus
messages.
* sys/dvb/dvbbasebin.c:
Instead of attaching to signals, use the bus messages.
Also fix up so the dvbsrc starts only outputting the info tables
like PAT, CAT, NIT, SDT, EIT instead of the whole ts.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* configure.ac:
Bump libsoup requirement as libsoup does not support async client
operation prior to version 2.2.104 and it has some leaks.
* ext/soup/gstsouphttpsrc.c: (gst_souphttp_src_class_init),
(gst_souphttp_src_init), (gst_souphttp_src_dispose),
(gst_souphttp_src_set_property), (gst_souphttp_src_create),
(gst_souphttp_src_start), (gst_souphttp_src_stop),
(gst_souphttp_src_unlock), (gst_souphttp_src_unlock_stop),
(gst_souphttp_src_get_size), (soup_got_headers), (soup_got_body),
(soup_finished), (soup_got_chunk), (soup_response),
(soup_session_close):
* ext/soup/gstsouphttpsrc.h:
Implement unlock().
Picks up the size from the Content-Length header and emit a duration
message.
Don't leak the GMainContext object.
Fixes#500099.
Original commit message from CVS:
* ext/alsaspdif/alsaspdifsink.c: (alsaspdifsink_set_caps),
(alsaspdifsink_get_time), (alsaspdifsink_set_params),
(alsaspdifsink_find_pcm_device):
Don't free uninitialized data when we are in error.
Original commit message from CVS:
* gst/speexresample/README:
* gst/speexresample/arch.h:
* gst/speexresample/resample.c: (resampler_basic_direct_single),
(resampler_basic_direct_double),
(resampler_basic_interpolate_single),
(resampler_basic_interpolate_double),
(speex_resampler_process_native), (speex_resampler_process_float),
(speex_resampler_process_int),
(speex_resampler_process_interleaved_float),
(speex_resampler_process_interleaved_int),
(speex_resampler_get_input_latency),
(speex_resampler_get_output_latency):
* gst/speexresample/speex_resampler.h:
Update speex resampler to latest SVN. We're now down to only the
changes noted in README again.
* gst/speexresample/speex_resampler_wrapper.h:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_query):
Adjust to API changes.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Output segment with proper 'stop' value, makes flvdemux 100% compatible
with gnonlin.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
pat-info is now a signal not a GObject property that
gets notified.
pat-info, pmt-info now instead of passing a GObject as
a parameter, pass a GstStructure.
New signals: nit-info, sdt-info, eit-info for DVB SI information
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
Cam code now uses the pmt GstStructure passed from mpegtsparse
signals rather than the GObject.
* sys/dvb/dvbbasebin.c:
Use new signals in mpegtsparse and use GstStructures as per
mpegtsparse's modified API.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Only post the latency message if we have a resampler state already.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Also post GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/speexresample/resample.c: (speex_resampler_get_latency),
(speex_resampler_drain_float), (speex_resampler_drain_int),
(speex_resampler_drain_interleaved_float),
(speex_resampler_drain_interleaved_int):
* gst/speexresample/speex_resampler.h:
* gst/speexresample/speex_resampler_wrapper.h:
Add functions to push the remaining samples and to get the latency
of the resampler. These will get added to Speex SVN in this or a
slightly changed form at some point too and should get merged then
again.
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_init),
(gst_speex_resample_init_state),
(gst_speex_resample_transform_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_fix_output_buffer), (gst_speex_resample_process),
(gst_speex_resample_query), (gst_speex_resample_query_type):
Drop the prepending zeroes and output the remaining samples on EOS.
Also properly implement the latency query for this. speexresample
should be completely ready for production use now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
* gst/speexresample/README:
Add README explaining where the resampling code was taken from
and which changes were done.
* gst/speexresample/resample.c: (speex_alloc), (speex_realloc),
(speex_free):
Use g_malloc() and friends instead of malloc() to achieve higher
portability and define the functions inline.
* gst/speexresample/speex_resampler.h:
Add back some useless preprocessor stuff to keep the diff between
our version and the one from the Speex SVN repository lower.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_set_property):
* gst/filter/gstlpwsinc.c: (lpwsinc_set_property):
Post a GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* ext/faac/gstfaac.c: (gst_faac_sink_event):
Don't try to flush the decoder on EOS when it was not initialized.
Fixes#498667
Original commit message from CVS:
2007-11-21 Julien Moutte <julien@fluendo.com>
* ext/sdl/sdlaudiosink.c: (gst_sdlaudio_sink_write): Fix build
on Mac OS X. (missing format parameter)
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Remove preset iface again. We'll re-add this after its been released
in -good.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_transform):
Some small cleanup and addition of a TODO item.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_process):
If the resampler gives less output samples than expected
adjust the output buffer and print a warning.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Activate preset iface and upload two presets here.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/mpegtsparse/mpegtspacketizer.c: (foreach_stream_clear),
(remove_all), (mpegts_packetizer_clear):
Ensure that the plugin does not crash when the property pat-info is
queried before a PAT is available. It also ensures that the PAT info is
cleared when the changing from PLAYING to READY.
Fixes#487892.
Original commit message from CVS:
Patch by: Michael Kötter <m dot koetter at oraise dot de>
* ext/alsaspdif/alsaspdifsink.c: (alsaspdifsink_set_caps),
(alsaspdifsink_get_time), (alsaspdifsink_open),
(alsaspdifsink_set_params), (alsaspdifsink_delay), (plugin_init):
Fix sample rate and clocking.
Remove buffer_time and period_time as this seems to break on some
hardware. Fixes#485462.
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
don't forget to handle the offset's
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
precalculate some many used values
Original commit message from CVS:
patch by: Armando Taffarel Neto <taffarel@solis.coop.br>
* gst/librfb/gstrfbsrc.c:
Set the timestamp for the output buffers
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/replaygain/rganalysis.c: (yule_filter):
Avoid slowdown from denormals when processing near-silence input data.
Spotted by Gabriel Bouvigne. Fixes#494499.
Original commit message from CVS:
* gst/flv/gstflvparse.c:
Add mapping for Nellymoser ASAO audio codec.
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video): Make sure we
actually have data to read at the end of the tag. This avoids trying
to allocate negative buffers.
Original commit message from CVS:
* gst/equalizer/demo.c: (draw_spectrum):
* gst/spectrum/demo-audiotest.c: (draw_spectrum):
* gst/spectrum/demo-osssrc.c: (draw_spectrum):
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init):
Change the meaning of the magnitude values given in the
GstMessages by spectrum to decibel instead of
decibel+threshold.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
* gst/equalizer/gstiirequalizernbands.c:
And continue to update docs. Also include some sample code
for the n-band equalizer in the docs.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_class_init):
* gst/equalizer/gstiirequalizer3bands.c:
(gst_iir_equalizer_3bands_class_init):
* gst/equalizer/gstiirequalizernbands.c:
Update docs and property ranges to the real values.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c:
Now do the scaling right for real. Also initialize a previously
uninitialized variable.
Original commit message from CVS:
* gst/equalizer/demo.c:
Make default volume a bit less. Improve layout by giving more space to
the slider with big-numbers and enable fill.
Original commit message from CVS:
* configure.ac:
* tests/check/pipelines/gio.c: (GST_START_TEST):
Require GIO >= 0.1.2 and adjust unit test for an API change.
Original commit message from CVS:
* ext/gio/gstgio.h:
Add macro to check if a stream supports seeking.
* ext/gio/Makefile.am:
* ext/gio/gstgiobasesink.c: (gst_gio_base_sink_base_init),
(gst_gio_base_sink_class_init), (gst_gio_base_sink_init),
(gst_gio_base_sink_finalize), (gst_gio_base_sink_start),
(gst_gio_base_sink_stop), (gst_gio_base_sink_unlock),
(gst_gio_base_sink_unlock_stop), (gst_gio_base_sink_event),
(gst_gio_base_sink_render), (gst_gio_base_sink_query),
(gst_gio_base_sink_set_stream):
* ext/gio/gstgiobasesink.h:
* ext/gio/gstgiobasesrc.c: (gst_gio_base_src_base_init),
(gst_gio_base_src_class_init), (gst_gio_base_src_init),
(gst_gio_base_src_finalize), (gst_gio_base_src_start),
(gst_gio_base_src_stop), (gst_gio_base_src_get_size),
(gst_gio_base_src_is_seekable), (gst_gio_base_src_unlock),
(gst_gio_base_src_unlock_stop), (gst_gio_base_src_check_get_range),
(gst_gio_base_src_create), (gst_gio_base_src_set_stream):
* ext/gio/gstgiobasesrc.h:
Refactor common GIO functions to GstGioBaseSink and GstGioBaseSrc
base classes that only require a GInputStream or GOutputStream to
work.
* ext/gio/gstgiosink.c: (gst_gio_sink_base_init),
(gst_gio_sink_class_init), (gst_gio_sink_init),
(gst_gio_sink_finalize), (gst_gio_sink_start):
* ext/gio/gstgiosink.h:
* ext/gio/gstgiosrc.c: (gst_gio_src_base_init),
(gst_gio_src_class_init), (gst_gio_src_init),
(gst_gio_src_finalize), (gst_gio_src_start):
* ext/gio/gstgiosrc.h:
Use the newly created base classes here.
* ext/gio/gstgio.c: (plugin_init):
* ext/gio/gstgiostreamsink.c: (gst_gio_stream_sink_base_init),
(gst_gio_stream_sink_class_init), (gst_gio_stream_sink_init),
(gst_gio_stream_sink_finalize), (gst_gio_stream_sink_set_property),
(gst_gio_stream_sink_get_property):
* ext/gio/gstgiostreamsink.h:
* ext/gio/gstgiostreamsrc.c: (gst_gio_stream_src_base_init),
(gst_gio_stream_src_class_init), (gst_gio_stream_src_init),
(gst_gio_stream_src_finalize), (gst_gio_stream_src_set_property),
(gst_gio_stream_src_get_property):
* ext/gio/gstgiostreamsrc.h:
Implement GstGioStreamSink and GstGioStreamSrc that have a property
to set the GInputStream/GOutputStream that should be used.
* tests/check/Makefile.am:
* tests/check/pipelines/.cvsignore:
* tests/check/pipelines/gio.c: (message_handler), (GST_START_TEST),
(gio_testsuite), (main):
Add unit test for giostreamsrc and giostreamsink.
Original commit message from CVS:
* ext/gio/gstgio.c: (plugin_init):
Remove nowadays unnecessary workaround for a crash.
* ext/gio/gstgiosink.c: (gst_gio_sink_finalize),
(gst_gio_sink_start), (gst_gio_sink_stop),
(gst_gio_sink_unlock_stop):
* ext/gio/gstgiosink.h:
* ext/gio/gstgiosrc.c: (gst_gio_src_finalize), (gst_gio_src_start),
(gst_gio_src_stop), (gst_gio_src_unlock_stop):
* ext/gio/gstgiosrc.h:
Make the finalize function safer, clean up everything that could stay
around.
Reset the cancellable instead of creating a new one after cancelling
some operation.
Don't store the GFile in the element, it's only necessary for creating
the streams.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (main):
Use autoaudiosink instead of alsasink and use a sine wave.
* gst/spectrum/gstspectrum.c:
Fix the magnitude calculation.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/dshow/gstdshowfakesink.cpp:
(CDshowFakeSink.CDshowFakeSink):
* gst-libs/gst/dshow/gstdshowfakesink.h: (CDshowFakeSink.m_hres):
Fix crasher in constructor due to the base class's constructor
not necessarily being NULL-safe (depends on the SDK version used
apparently; #492406).
* sys/dshowsrcwrapper/gstdshowaudiosrc.c: (gst_dshowaudiosrc_prepare):
* sys/dshowsrcwrapper/gstdshowvideosrc.c: (gst_dshowvideosrc_set_caps):
Fix a couple of MSVC compiler warnings (#492406).
Original commit message from CVS:
* gst/equalizer/demo.c: (main):
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_class_init), (setup_filter):
Allow setting 0 as bandwidth and handle this correctly.
Also handle a bandwidth of rate/2 properly.
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_class_init):
Make it possible to generate a N-band equalizer with 1 bands. The
previous limit of 2 was caused by a nowadays replaced calculation
doing a division by zero if number of bands was 1.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/demo.c: (on_window_destroy), (on_configure_event),
(on_gain_changed), (on_bandwidth_changed), (on_freq_changed),
(draw_spectrum), (message_handler), (main):
Add small demo application based on the spectrum demo applications
that gets white noise as input, pushes it through an equalizer and
paints the spectrum. For every equalizer band it's possible to set
gain, bandwidth and frequency.
* gst/equalizer/gstiirequalizer.c: (setup_filter):
Add some guarding against too large or too small frequencies and
bandwidths. Also improve debugging a bit.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init), (arg_to_scale),
(setup_filter), (gst_iir_equalizer_compute_frequencies):
Replace filters with a bit better filters for which we can actually
find documentation, which don't change anything on zero gain, etc.
Make the frequency property of the bands writable, rename the
band-width property to bandwidth and change the meaning to the
frequency difference between bandedges, change the meaning of the
gain property to dB instead of a weird scale between -1 and 1 that
has no real meaning.
Original commit message from CVS:
Changed kclass to "Parser/Extracter/Metadata", changed caps to "image/jpeg, tags-extract=true/false" and changed priority to GST_RANK_PRIMARY+1. Also, srcpad can only work in push mode until fixed to also work in pull mode.
Original commit message from CVS:
Created new plugin ('medadata') and element ('metadataparse') that extract metadata from images (look at bug #486659).
Original commit message from CVS:
* ext/faac/gstfaac.c: (gst_faac_profile_get_type),
(gst_faac_class_init), (gst_faac_init):
Fix bitrate ranges and change enum nick for low complexity
profile from LOW to LC for consistency (#490060).
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_request_new_pad):
Let's not call every request pad we create "sink%d", that'll
create problems if there's to be more than one pad. Fixes#490682.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/interleave.c:
Add unit test for the above.
Original commit message from CVS:
2007-10-27 Julien MOUTTE <julien@moutte.net>
* gst/mpeg4videoparse/mpeg4videoparse.c:
(gst_mpeg4vparse_align),
(gst_mpeg4vparse_drain), (gst_mpeg4vparse_chain),
(gst_mpeg4vparse_sink_setcaps), (gst_mpeg4vparse_sink_event),
(gst_mpeg4vparse_cleanup), (gst_mpeg4vparse_change_state),
(gst_mpeg4vparse_dispose), (gst_mpeg4vparse_base_init),
(gst_mpeg4vparse_class_init), (gst_mpeg4vparse_init),
(plugin_init):
* gst/mpeg4videoparse/mpeg4videoparse.h: Improved version not
damaging headers using a simple state machine.
