Sebastian Dröge
2d1c9f8c0f
Back to development
2016-03-24 13:32:52 +02:00
Sebastian Dröge
d67525d594
Release 1.8.0
2016-03-24 12:19:23 +02:00
Sebastian Dröge
407dd05da1
Update .po files
2016-03-24 11:43:05 +02:00
Víctor Manuel Jáquez Leal
327d617d39
install-plugins: update documentation
...
Use gst-inspect-1.0 instead of gst-inspect-0.10
https://bugzilla.gnome.org/show_bug.cgi?id=763316
2016-03-24 10:29:27 +02:00
Sebastian Dröge
a730be9cbd
Release 1.7.91
2016-03-15 12:02:20 +02:00
Sebastian Dröge
3b3d1c203b
Update .po files
2016-03-15 11:48:09 +02:00
Sebastian Dröge
ee86222fdf
po: Update translations
2016-03-15 11:40:06 +02:00
Sebastian Dröge
9c2d76fb9f
decodebin: Shut down all elements explicitly to NULL state before freeing the decode chain
...
Due to transient locked state during autoplugging, some elements might be
ignored by the GstBin::change_state() and might still be running. Which could
then cause pad-added and similar accessing decodebin state that does not exist
anymore, and crash.
https://bugzilla.gnome.org/show_bug.cgi?id=763625
2016-03-14 17:09:32 +02:00
Sebastian Dröge
65390b5129
multihandlesink: Remove useless streamheader storage
...
We don't do anything with it but always get them from the caps anyway, so
stop storing them and having complicated logic around that.
https://bugzilla.gnome.org/show_bug.cgi?id=763278
2016-03-14 12:45:33 +02:00
Sebastian Dröge
1d4fb48718
multihandlesink: Only don't send HEADER buffers normally if they are actually streamheaders from the caps
...
And also consider HEADER buffers without DELTA_UNIT flag as sync points. This
fixes sync-mode=2 with mpegtsmux for example, which has no streamheaders but
puts the HEADER flag on its keyframes.
https://bugzilla.gnome.org/show_bug.cgi?id=763278
2016-03-14 12:45:33 +02:00
Sebastian Dröge
916746e731
decodebin: expose_pad() is always called with lock==TRUE, simplify code
...
This basically reverts ee44337fc3
.
https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 12:45:29 +02:00
Sebastian Dröge
65d09c1495
decodebin: Don't check twice if the decode chain is complete in pad_added_cb()
...
expose_pad() already does the same.
https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 12:45:29 +02:00
Sebastian Dröge
001c7f04a0
decodebin: Don't hold EXPOSE_LOCK in type_found() outside the stream lock
...
In other places we lock it the other way around, leading to possible
deadlocks. Also this will deadlock if analyze_pad() causes a new element to be
autoplugged that adds new pads on itself when its state is changed.
https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 12:45:29 +02:00
Sebastian Dröge
0a434e9c6c
tcp: Remove unused file
...
It's a copy of multihandlesink, but completely outdated. Let's get rid of it
before it gets even more outdated.
https://bugzilla.gnome.org/show_bug.cgi?id=763278
2016-03-14 12:45:16 +02:00
Lubosz Sarnecki
8a443784c4
basetextoverlay: Add new properties and alignment type for unclamped absolute positions
...
Introduces [x-absolute, y-absolute] properties
for positioning in +/- MAX_DOUBLE range.
Adds new (h/v)alignment type "absolute" where coordinates
map the text area to be exactly inside of video canvas for [0, 0] - [1, 1]:
[0, 0]: Top-Lefts of video and text are aligned
[0.5, 0.5]: Centers are aligned
[1, 1]: Bottom-Rights are aligned
https://bugzilla.gnome.org/show_bug.cgi?id=761251
2016-03-11 13:20:26 +00:00
Tim-Philipp Müller
241fcaa645
Revert "textoverlay: Do not limit positioning to video area."
...
This reverts commit a48daf6dd8
.
This changed behaviour in a way that's not always
backwards-compatible.
https://bugzilla.gnome.org/show_bug.cgi?id=761251
2016-03-11 13:15:53 +00:00
Nirbheek Chauhan
747bf12959
win32: Add a module definitions file for gstfft
2016-03-10 09:51:56 +00:00
Tim-Philipp Müller
aade5515ac
theora: fix performance category initialisation
...
Remove unused _register() functions and look up the performance
debug category in a function that's actually called at some point.
2016-03-09 09:56:52 +00:00
Wim Taymans
c0ef1ea553
audio-channel-mixer: improve non-interleaved flags
...
Make separate flags for non-interleaved input and output because the
channel mixer should be able to convert between the two layouts in the
future.
2016-03-04 17:17:33 +01:00
Vincent Penquerc'h
509d4a0f92
gst-play: remove peculiar setting of invalid -v property
2016-03-04 13:10:49 +00:00
Vincent Penquerc'h
603e2fe24a
oggdemux: fix chaining causing running time to restart from 0
...
This fixes:
gst-play-1.0 http://relay-nyc.gameowls.com:8000/chiptune.ogg
https://bugzilla.gnome.org/show_bug.cgi?id=758282
2016-03-04 12:18:53 +00:00
Havard Graff
461cdd8c26
opusdec: plug caps leak
...
https://bugzilla.gnome.org/show_bug.cgi?id=763059
2016-03-03 20:10:09 +00:00
Sebastian Dröge
e2c992de46
Revert "playbin: use avdeinterlace for deinterlacing until deinterlace is ported"
...
This reverts commit 0615794300
.
deinterlace was ported at some point in the last 4 years and has better video
format support, and especially better negotiation than avdeinterlace. Having
avdeinterlace but not deinterlace causes various problems in zerocopy
scenarios.
https://bugzilla.gnome.org/show_bug.cgi?id=760553
2016-03-02 20:47:42 +02:00
Sebastian Dröge
e79749a531
encodebin: Make dispose() function safe to be called multiple times
2016-03-02 18:47:23 +02:00
Sebastian Dröge
48f584e663
Release 1.7.90
2016-03-01 18:14:54 +02:00
Sebastian Dröge
4e076fa2ca
po: Update translations
2016-03-01 16:53:05 +02:00
Tom Deseyn
8c4d3c6aa9
multisocketsink: handle client close correctly and EWOULDBLOCK
...
Fixes 100% cpu usage when client disconnects. Commit 6db2ee56
would just make multisocketsink ignore reads of 0 bytes without
removing the client, so we'd get woken up over and over again
for the client.
Fix the original issue differently by handling the non-fatal error code.
https://bugzilla.gnome.org/show_bug.cgi?id=761257
https://bugzilla.gnome.org/show_bug.cgi?id=743834
2016-03-01 13:15:38 +00:00
Tim-Philipp Müller
b424712644
video: update disted orc backup file
...
https://bugzilla.gnome.org/show_bug.cgi?id=761851
2016-02-27 00:13:03 +00:00
Göran Jönsson
babcf4d30c
video-converter: add direct UYVY to GRAY8 conversion function
...
https://bugzilla.gnome.org/show_bug.cgi?id=761851
2016-02-26 23:56:51 +00:00
Vincent Penquerc'h
625bd68da7
opus: fix mono<->stereo up/down-mixing
...
https://bugzilla.gnome.org/show_bug.cgi?id=761588
2016-02-26 16:15:20 +00:00
Lim Siew Hoon
5ae5f9055f
pbutils: docs: Remove the empty lines in between <refsect2> and </refsect2>
...
They are converted into <para></para> by gtk-doc...
https://bugzilla.gnome.org/show_bug.cgi?id=762674
2016-02-26 14:46:44 +02:00
Sebastian Dröge
0202081bd3
Automatic update of common submodule
...
From b64f03f to 6f2d209
2016-02-26 12:41:01 +02:00
Tim-Philipp Müller
8b48fc1569
opusenc: remove deprecated "cbr", "audio", and "constrained-vbr" properties
...
They have been replaced by "audio-type" and "bitrate-type".
https://bugzilla.gnome.org/show_bug.cgi?id=756282
2016-02-26 06:51:17 +00:00
Tim-Philipp Müller
fd9e22e5e9
docs: add Opus to docs
2016-02-26 00:37:57 +00:00
Tim-Philipp Müller
f331412a37
opus: move Opus audio decoder and encoder from -bad to -base
...
Hook into build system after moving history.
https://bugzilla.gnome.org/show_bug.cgi?id=756282
2016-02-26 00:20:10 +00:00
Tim-Philipp Müller
a2eb430010
Merge branch 'plugin-move-opus'
...
Move Opus decoder and encoder from -bad to -base.
https://bugzilla.gnome.org/show_bug.cgi?id=756282
2016-02-25 23:51:42 +00:00
Tim-Philipp Müller
a153804566
tools: gst-play: add 'n' and 'b' as additional shortcuts for next/previous item
...
< and > are composed with shift + something else on many keyboards
layouts, so don't work well when injecting them via windowing systems
which will send them as shift key press and separate other key, and
we the don't combine that to < or > properly. n/b are easier.
2016-02-25 23:16:22 +00:00
Sebastian Dröge
16e53defe5
audiovisualizer: Use the library instead of including the source file
...
Fixes build now that the shader enum GType has moved to a different file.
2016-02-26 00:02:49 +02:00
Sebastian Dröge
87f380867b
audiovisualizer: Let GstAudioVisualizerShader enum GType be autogenerated by glib-mkenums
...
That happens automatically already anyway.
2016-02-25 20:40:02 +02:00
Tim-Philipp Müller
c64dae3e1d
video: flesh out docs for gst_video_frame_map()
2016-02-25 17:46:31 +00:00
Luis de Bethencourt
e23b12b1c9
visual: correct type name
...
Base class type name should not reference libvisual since not all child
elements use this. This was an oversight when merging audiovisualizers into
a common base class.
2016-02-25 10:51:50 +00:00
Wim Taymans
221e661f07
audio-quantize: fix feedback dither
...
Make sure we allocated enough extra space in the error buffer to
store the feedback error.
2016-02-24 14:57:31 +01:00
Wim Taymans
3e8cf31a96
audio-converter: perform dithering on the current format
...
Use the current (intermediate) format to decide how to set up dithering
instead of the input format.
2016-02-24 14:57:31 +01:00
Sebastian Dröge
2c29f09da8
rtpbasepayload: Handle gst_pad_get_current_caps() returning NULL gracefully
2016-02-23 18:23:45 +02:00
Edward Hervey
27a1fa469c
Revert "playsink: Properly mark pending blocked pads"
...
This reverts commit 62053852de
.
The issue that the patch fixes is only noticeable when using decodebin3,
which isn't yet in master.
2016-02-23 09:35:22 +01:00
Adam Miartus
2bab28f494
tag: id3v2: read conductor tag
...
ID3v2 features the TPE3 info frame, which contains information
about the conductor.
https://bugzilla.gnome.org/show_bug.cgi?id=762451
2016-02-22 21:16:54 +00:00
Tim-Philipp Müller
a62c7bd54c
Fix use of undeclared core debug category symbols
...
libgstreamer currently exports some debug category
symbols GST_CAT_*, but those are not declared in any
public headers.
Some plugins and libgstvideo just use GST_DEBUG_CATEGORY_EXTERN()
to declare and use those, but that's just not right at
all, and it won't work on Windows with MSVC. Instead look
up the categories via the API.
2016-02-20 11:31:43 +00:00
Tim-Philipp Müller
ddfe7a2808
win32: remove outdated build cruft
...
This hasn't been touched for generations, doesn't work,
and is just causing confusion. We also don't want to
maintain these files manually.
2016-02-20 10:05:17 +00:00
Sebastian Dröge
5de6856215
Back to development
2016-02-19 12:38:24 +02:00
Sebastian Dröge
97e108beba
Release 1.7.2
2016-02-19 11:48:30 +02:00