Original commit message from CVS:
* gst/parse/grammar.y:
* gst/parse/parse.l:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (parse_suite):
Fix some of the leaks exposed by extending the parse-launch testsuite,
and move the 3 I can't figure out into a separate test that won't run
the pipelines unless the appropriate line is uncommented.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
the test_buffer test fails at line 140 on ppc64 at the following
check:
fail_unless (GST_BUFFER_FLAG_IS_SET (newbuffer, GST_BUFFER_FLAG_IN_CAPS),
"GST_BUFFER_IN_CAPS flag should have been copied !");
See bug #348114 for more details.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail com>
* gst/gstutils.c: (gst_element_unlink):
Free iterator when done (#347311).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
And add a test case for this.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_array), (_gst_value_initialize):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Make GstValueArray comparison be order dependent as designed.
Add checks for value lists and value array comparisons.
Fixes#347221
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_name_default),
(gst_object_set_name):
Random micro-optimisation: don't use a hash table
with strings as keys and the usual strdup/strcmp
involved, but rather just use the GQuark of the
type name as key, since it needs to be looked up
anyway to get the type name string.
* tests/check/gst/gstobject.c: (GST_START_TEST):
Fix various leaks.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_copy), (gst_buffer_create_sub):
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
No point in checking if the size of the subbuffer > 0, the
code handles it correclty as demonstrated by unit test.
Also add a unit test for the zero sized _new_and_alloc and
_copy. Fixes#346663.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* configure.ac:
don't set CFLAGS and friends for gcov, done from GST_GCOV now
* tests/check/Makefile.am:
clean up gcov files
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* tests/check/Makefile.am:
gst-inspect every element; this makes sure that we also get
coverage on element's get/set functions
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Push coverage from 59.04% to 70.00%
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (block_callback),
(GST_START_TEST), (gst_ghost_pad_suite):
Added some more ghostpad tests, mainly blocking
and probes.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
fix a leak if no flags are set
* tests/check/gst/gstvalue.c: (GST_START_TEST):
fix leak in tests
Original commit message from CVS:
* gst/gstevent.c: (_gst_event_initialize):
* gst/gstformat.c: (_gst_format_initialize):
make sure some essential types used by events are registered
as part of gst_init()
* gst/gstvalue.c: (gst_value_serialize_flags):
if no flags are set, serialize them to a value that represents NONE
so that deserializing them works
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
add tests for serialization and deserialization of flags
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
2006-04-29 Thomas Vander Stichele <thomas at apestaart dot org>
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
add more asserts on refcounts
do more cleanup at end of tests
fix test leaks showing in FC5
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer):
Don't try to serialize a GValue with a NULL buffer.
Fixes#339821.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Added check for serialisation of NULL buffers.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register),
(gst_element_factory_create), (gst_element_factory_make):
Some cleanups.
Fixed a FIXME.
Updated docs (Fixes#131079)
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
Small cleanups.
* tests/check/gst/gstelement.c: (GST_START_TEST),
(gst_element_suite):
Added testcase for elementfactory class field.
Original commit message from CVS:
* gst/parse/grammar.y:
Fix a leak in parse-launch for any source-or-sink named element
references used.
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Unref the pipeline if it exists after we've failed parsing.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Unref a pad we reffed.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Unref bins
Original commit message from CVS:
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix a variety of memleaks in sinks check, which are only sometimes
shown by running the tests under valgrind (weird?).
Original commit message from CVS:
* configure.ac:
* tests/check/Makefile.am:
disable some tests when we don't have a registry
* tests/check/gst/gstutils.c: (gst_utils_suite):
don't build the part that needs parsing
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstevent.h:
* gst/gstmessage.h:
gst_[buffer|event|message]_ref() macros are replaced by a static
inline functions because gcc-4.1 will about if the return value
isn't used.
* tests/check/gst/gstevent.c: (event_probe):
gst_event_ref now has to be given a GstEvent* , fix check accordingly.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/basesrc.c: (eos_event_counter),
(basesrc_eos_events_pull), (basesrc_eos_events_push),
(basesrc_eos_events_push_live_op), (basesrc_eos_events_pull_live_op),
(gst_basesrc_suite), (main):
... and add some tests for the base source EOS stuff.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_buffer_probe_n_times):
Test case originally showed the problem fixed below,
but was then amended. Add checks back at the place
where they used to be.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (data_probe), (buffer_probe),
(event_probe), (GST_START_TEST):
Only events up to the pipeline EOS are counted, there are
some more when going to NULL currently which we don't care
about for now.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (test_parse_bin_from_description),
(gst_utils_suite):
Add some simple tests for gst_parse_bin_from_description() and
gst_bin_find_unconnected_pad() (#329069).
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_unlink_pads):
Don't leak pad references.
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/generic/states.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstcaps.c: (GST_START_TEST):
* tests/check/gst/gstelement.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstiterator.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Fix a bunch of leaks. Make generic/sinks.c
use a bit less cpu by slowing the buffer rate
between fakesrc and fakesink.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/gstquery.c: (GST_START_TEST), (gstquery_suite),
(main):
Add a very simple check that should have caught the memleak I fixed
last night (if not for the slice allocator hiding it)
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/fakesink.c: (chain_async_buffer),
(chain_async), (chain_async_return), (GST_START_TEST),
(fakesink_suite), (main):
Added fakesink test that checks prerolling and clipping
behaviour.
* tests/check/gst/gstutils.c: (GST_START_TEST):
Make check run faster so that buildbots don't timeout.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_mini_object_lcopy):
Fix lcopy for mini objects, the mini object needs to be ref'ed.
* tests/check/gst/gstminiobject.c: (my_foo_init),
(my_foo_get_property), (my_foo_set_property), (my_foo_class_init),
(test_value_collection), (gst_mini_object_suite):
Add test to ensure refcounts end up as expected when passing
GstMiniObjects through g_object_get() and g_object_set().
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_init),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Added more documentation.
Make sure the last_pos value is updated properly.
Make sure to_stream_time and to_running_time don't
operate on wrong values.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Update check.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/libsabi.c: (GST_START_TEST), (gstabi_suite),
(main):
* tests/check/libs/struct_i386.h:
Added ABI check for libs, this time for real
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstplugin.h:
* gst/gstregistry.h:
* tests/benchmarks/complexity.c:
* tests/benchmarks/mass-elements.c:
* tests/check/Makefile.am:
* tools/Makefile.am:
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
various fixes to make
--disable-nls --disable-registry --disable-loadsave --disable-parse --disable-gst-debug
work and get the core .so down to 360444 bytes after stripping
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST):
Updated check, add some scaling accuracy checking code.
* gst/gstutils.c: (gst_util_div128_64),
(gst_util_uint64_scale_int64), (gst_util_uint64_scale),
(gst_util_uint64_scale_int):
Fix 6 times faster division code. Optimize for common
1/1 and less common X/1 cases.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
More checks.
* gst/gstclock.c: (gst_clock_finalize), (gst_clock_set_master),
(do_linear_regression), (gst_clock_add_observation):
Cleanups.
Release lock when the clock cannot be slaved.
Catch the case where the regression returned an invalid denominator.
* gst/gstutils.c: (gst_util_div128_64_iterate),
(gst_util_div128_64), (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Add protentially more performant non-iterative 128/64 divide function
that unfortunatly does not work yet.
Shortcut the trivial 0/X = 0 case.
Remove the warnings on overflow.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/fdsrc.c: (GST_START_TEST):
Use a cmdline define to specify the location of a file to use for
testing, to avoid breaking distcheck.
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added more checks for the high precision uint64 cases.
* gst/gstutils.c: (gst_util_uint64_scale_int64),
(gst_util_uint64_scale), (gst_util_uint64_scale_int):
Implement high precission (guint64 * guint64) / guint64.
Original commit message from CVS:
* check/gst/gstminiobject.c: (thread_ref), (GST_START_TEST),
(gst_mini_object_suite):
don't use check calls from threads; check probably isn't
threadsafe and using a lock to make it threadsafe would
defeat the purpose of this check
* gst/check/gstcheck.c:
* gst/check/gstcheck.h:
use GST_DEBUG some more
Original commit message from CVS:
* check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Added test for scaling.
* gst/gstclock.h:
Small doc fix.
* gst/gstutils.c: (gst_util_uint64_scale_int):
Implemented high precision scaling code.
Original commit message from CVS:
2005-11-23 Andy Wingo <wingo@pobox.com>
* check/net/gstnetclientclock.c (test_functioning): Adjust to
rate_num/rate_denom change.
* gst/net/gstnetclientclock.c
(gst_net_client_clock_observe_times): Take the SLAVE_LOCK not the
OBJECT_LOCK. Don't call add_observation with the lock.
* gst/gstclock.c (gst_clock_init): Initialize the rate as a
fraction.
(gst_clock_adjust_unlocked): Adjust using uint64_scale and the
rate fraction.
(gst_clock_set_calibration, gst_clock_get_calibration): Change to
deal with rate as a fraction whose numerator and denominator are
GstClockTime values.
(gst_clock_set_master): Only use the OBJECT_LOCK to set the
master; the other fields are protected by the SLAVE_LOCK.
(do_linear_regression): Note that this must be called with the
SLAVE_LOCK.
(gst_clock_add_observation): Take the SLAVE_LOCK, not the
OBJECT_LOCK. Call set_calibration instead of touching the
variables directly.
(gst_clock_set_property, gst_clock_get_property): Protect
master/slave parameters with the SLAVE_LOCK.
* gst/gstclock.h (GstClock): Remove rate, add rate_numerator and
rate_denominator. PR3C1S3. Add a new lock, the SLAVE_LOCK, and
note that all of the instance variables that add_observation and
the set_master functions use are protected by that lock and not
the OBJECT_LOCK.
(GST_CLOCK_SLAVE_LOCK, GST_CLOCK_SLAVE_UNLOCK): New macros.
* gst/gstclock.c (gst_clock_add_observation): No longer requires
the caller to take the object lock.
Original commit message from CVS:
* check/gst/gststructure.c: (GST_START_TEST):
* gst/gststructure.c: (gst_structure_parse_value):
Oops, broke automatic string type parsing.
Add a test to catch it in future.
Original commit message from CVS:
* check/gst/capslist.h:
Comment test cases
* check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Test automatic value type detection in gst_structure_from_string.
* gst/gststructure.c: (gst_structure_parse_value):
Add fraction as a type we try and guess automatically in
caps/structure strings.
Original commit message from CVS:
* check/gst/gstcaps.c: (GST_START_TEST):
Extend caps string tests to check that a caps to string
conversion is reversible and produces the same caps.
* gst/gststructure.c: (gst_structure_value_get_generic_type):
Output "fraction" as the generic type fraction range, so caps
serialisation and deserialisation works.
* check/gst/capslist.h:
* gst/gstvalue.c: (gst_value_deserialize_fraction):
Support 'MIN' and 'MAX' for deserialising fractions.
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
* check/gst/gstevent.c: (test_event), (GST_START_TEST):
Block the fakesrc srcpad when we send an event, to avoid
contention on the stream_lock causing random test failures.
Original commit message from CVS:
* check/gst/capslist.h:
* check/gst/gstcaps.c: (GST_START_TEST):
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
* gst/gststructure.c: (gst_structure_parse_range),
(gst_structure_fixate_field_nearest_fraction):
* gst/gststructure.h:
* gst/gstvalue.c: (gst_value_init_fraction_range),
(gst_value_free_fraction_range), (gst_value_copy_fraction_range),
(gst_value_collect_fraction_range),
(gst_value_lcopy_fraction_range), (gst_value_set_fraction_range),
(gst_value_set_fraction_range_full),
(gst_value_get_fraction_range_min),
(gst_value_get_fraction_range_max),
(gst_value_serialize_fraction_range),
(gst_value_transform_fraction_range_string),
(gst_value_compare_fraction_range),
(gst_value_deserialize_fraction_range),
(gst_value_intersect_fraction_fraction_range),
(gst_value_intersect_fraction_range_fraction_range),
(gst_value_subtract_fraction_fraction_range),
(gst_value_subtract_fraction_range_fraction),
(gst_value_subtract_fraction_range_fraction_range),
(gst_value_collect_fraction), (gst_value_fraction_multiply),
(gst_value_fraction_subtract), (gst_value_deserialize_fraction),
(gst_value_transform_string_fraction), (_gst_value_initialize):
* gst/gstvalue.h:
Implement fraction ranges and extend GstFraction to support
arithmetic subtraction, as well as deserialization from integer
strings such as "100"
Add a testsuite as for int and double range set operations
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (GST_EVENT_FILLER): Removed. Can be added back
during the stable series if we need it. Fixes#319178.
* gst/gstevent.c (gst_event_new_filler): Removed.
* check/gst/gstevent.c: Update comment about filler events.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (GstEventTypeFlags): New data type, the flags of
the event type (upstream, downstream, serialized). Renamed
GST_EVDIR_* and GST_EVSER to GST_EVENT_TYPE_*.
(GstEventType): Use GstEventTypeFlags. Rename CUSTOM_UP to
CUSTOM_UPSTREAM, CUSTOM_DS to CUSTOM_DOWNSTREAM, etc.
* gst/gstevent.c: Update for new CUSTOM event names.
* check/gst/gstevent.c: Update check for new CUSTOM event names.
* gst/gstevent.h:
* gst/gstevent.c (gst_event_type_get_flags): New function. Fixes
bug #319392.
Original commit message from CVS:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add a deserialisation test for fractions
* examples/metadata/read-metadata.c: (message_loop),
(make_pipeline), (main):
Fix up metadata reading sample.
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Debug format fix
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't try and fixate empty caps
* gst/gst_private.h:
Wrap in G_BEGIN_DECLS/G_END_DECLS
* gst/gstvalue.c: (gst_value_collect_fraction),
(gst_value_set_fraction), (gst_value_get_fraction_denominator),
(gst_value_transform_string_fraction),
(gst_value_compare_fraction):
Add some extra guards to ensure that we don't end up
with an invalid denominator of 0 in a gstfraction and
that fractions always get reduced.
Original commit message from CVS:
2005-11-19 Andy Wingo <wingo@pobox.com>
* check/gst/gstvalue.c (test_string): Add test for bug #165650.
* gst/gstvalue.c (gst_string_wrap): Trying to serialize a NULL
string should produce an error, given the lack of a way to
represent NULL strings. Fixes#165650.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c: Turn off debugging.
* check/net/gstnetclientclock.c (test_functioning): Assert that the
times connverge somewhat. Can't make a real test.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (do_linear_regression): Use all
integer arithmetic. Return the minimum of the domain, which can be
set as "internal" for gst_clock_set_calibration.
(gst_net_client_clock_observe_times): Call _set_calibration.
(gst_net_client_clock_new): Call _set_calibration instead of
rate_offset.
* check/net/gstnetclientclock.c (test_functioning): Use the right
adjustment api.
* gst/gstclock.h:
* gst/gstclock.c (gst_clock_get_calibration)
(gst_clock_set_calibration): New functions, obsolete the ones I
added yesterday. Doh. Precision issues mean we have to extrapolate
from a point in the more recent past than 1970.
(gst_clock_get_rate_offset, gst_clock_set_rate_offset): Mark as
obsolete.
(gst_clock_adjust_unlocked): Use the right calibration data.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_thread):
Whoops, check the right fd. Also add some debugging.
(gst_net_client_clock_observe_times): Adjust for int64 offset.
(do_linear_regression): Add a crapload of debugging. Subtract off
the minimum values from the input series to discard unneeded bits.
Use only int arithmetic. There is still double arithmetic when
calculating the intercept that needs fixing. Return boolean to
indicate success; FALSE would mean the domain or range is too
great. Still needs fixes.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_class_init):
Port goes all the way to MAXUINT16.
* gst/net/gstnettimeprovider.c: Make the port range the same as
for the kernel: 0 assigns, otherwise ports are less than
MAXUINT16.
* check/net/gstnettimeprovider.c: Adapt for 0 == kernel assigns
port change.
* check/net/gstnetclientclock.c (test_functioning): Add the start
of another test.
Original commit message from CVS:
2005-11-17 Andy Wingo <wingo@pobox.com>
* check/Makefile.am (check_PROGRAMS):
* check/net/gstnetclientclock.c: Add a most minimal test for the
net client clock. More to come later.
* gst/net/gstnet.h:
* gst/net/Makefile.am: Add netclientclock.
* gst/net/gstnetclientclock.h:
* gst/net/gstnetclientclock.c: New files, implement an untested
GstClock that takes its time from a network time provider.
Implements the algorithm in network-clock.scm.
* tests/network-clock.scm (*window-size*): Rename from
*queue-length*.
* tests/network-clock.scm (network-time):
* tests/network-clock-utils.scm (q-push): Update callers.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* check/net/gstnettimeprovider.c: Check to see that the time
provider actually provides times. Works, yo!
Original commit message from CVS:
* check/Makefile.am:
Enable more tests.
* check/elements/fakesrc.c: (GST_START_TEST):
Set element to NULL before disposing it.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h:
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: Use the timepacket stuff in the
provider, include it from gstnet.h, and add it to the build.
* gst/net/gstnettimepacket.h:
* gst/net/gstnettimepacket.c: New files, abstracts out the packet
sending and receiving.
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h: New part of core to hold network elements and
objects. Put in core because it exposes API that applications want
to use. The library is named libgstnet-tempname right now because
of the existing libgstnet in gst-plugins-base. Solution is
probably to rename the one in plugins-base; will file a bug for
the freeze break.
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: New object to export a GstClock's
get_time call over the network.
* configure.ac:
* gst/Makefile.am (lib_LTLIBRARIES): Add gstnet to the build.
* check/Makefile.am:
* check/net/gstnettimeprovider.c: A most minimal test suite. Will
get additions shortly.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_set_base_time): Add debugging.
* gst/gstpipeline.c (gst_pipeline_set_new_stream_time): Document
using GST_CLOCK_TIME_NONE to disable base time management.
(do_pipeline_seek, gst_pipeline_change_state): Don't reset stream
time if it was NONE before.
(gst_pipeline_change_state): Only munge the base time if
stream_time != GST_CLOCK_TIME_NONE.
* check/gst/gstpipeline.c (test_base_time): Punt around the
problem of the probe not being called, because that's not the
issue I'm looking at. Add a check that setting stream_time to NONE
disables base time management.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): Punt around the
problem of the probe not being called, because that's not the
issue I'm looking at...
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): Add check that the
base time and stream time are reset correctly.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): New test for buffer
timestamps with live capture.
* gst/elements/gstfakesrc.c (gst_fake_src_create): If the datarate
is 0 but we are a live source, timestamp the buffers using the
element's clock.
Original commit message from CVS:
2005-11-10 Andy Wingo <wingo@pobox.com>
* check/gst/gstbin.c (test_message_state_changed_children): Style
fix..
* gst/gstbus.c (poll_destroy, poll_func, gst_bus_poll): Implement
gst_bus_poll with the signal watch. Ensures that poll and a signal
watch see the same messages.
* check/gst/gstbus.c (test_watch_with_poll): New test, checks that
a poll and a watch at the same time get the same messages.
Original commit message from CVS:
patch by: Tim-Philipp Müller <tim at centricular dot net>
* gst/gststructure.c: (gst_structure_parse_field),
(gst_structure_from_string):
Forward-port a 0.8 patch to handle escaped spaces in structure string, so that gst_parse_launch() can deal with spaces in filtered link
caps (fixes#164479)
* check/gst/capslist.h:
* check/gst/gststructure.c: (GST_START_TEST):
add unit tests for this change
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added check for bug #317341
* gst/gstbuffer.c:
* gst/gstbuffer.h:
Some more spiffifying.
* gst/gstghostpad.c: (gst_ghost_pad_do_link):
Call peer linkfunction if we are a source pad. Totally fixes
#317341
* gst/gstpad.c:
Update docs, source pads should call the peer linkfunction
so they can atomically perform the pad link.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST):
Uncomment fixed check.
* docs/design/part-TODO.txt:
Updated TODO.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
If we are going to PLAYING, post the right pending state
when we post the intermediate paused message.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state):
Don't post state changes that were between the same state
and were not ASYNC.
Original commit message from CVS:
2005-11-03 Andy Wingo <wingo@pobox.com>
* check/states/sinks.c (test_livesrc_sink): Add checks that the
state-changed messages actually have the right order and the right
values.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
Added some more checks. Specifically the case where NO_PREROLL
elements are in the pipeline.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
Post READY->PAUSED state change messages too.
Fix bug where VOID was posted as pending state...
* gst/gstbin.c: (gst_bin_recalc_state):
use _element_continue_state() to continue the state change.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_commit_state), (gst_element_set_state_func),
(gst_element_change_state), (gst_element_change_state_func):
Lots of state change cleanups, assign the STATE_RETURN in
a new continue_state() function that also propagates the
last return value from a state change to the app.
Update some debug statements with proper category.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
An extra refcount is taken in basesrc.
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop):
Small cleanups, check for flushing after being unlocked from the
LIVE_LOCK. take refcounts correctly (not yet everywhere).
Don't send out EOS when going to READY.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstghostpad.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (GST_START_TEST):
wait on thread to die so we can check refcount correctly
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_recalc_func),
(bin_bus_handler):
* gst/gstelement.c: (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_state_dirty), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_duration),
(gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Seriously, this is better than a previous commit as we only need
to notify the fact that an element changed state in a streaming
thread, marking the state of the parents dirty, hence the
STATE_DIRTY message instead of abusing a boolean in a STATE_CHANGE
message.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (bin_bus_handler):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_segment_start), (gst_message_new_segment_done),
(gst_message_new_duration), (gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Make messages future proof.
state-change gets a flag if it was a message comming from the
streaming thread.
segment-start/stop can also be specified in other formats.
A message to notify an app that a pipeline changed playback
duration.
Also fix a GstMessage leak in -launch
Original commit message from CVS:
* gst/gstpluginfeature.c: (gst_plugin_feature_check_version):
* gst/gstpluginfeature.h:
* gst/gstregistry.c: (gst_default_registry_check_feature_version):
* gst/gstregistry.h:
* docs/gst/gstreamer-sections.txt:
Add new API to check plugin feature version requirements.
* check/gst/gstplugin.c: (test_version_checks), (gst_plugin_suite):
Some basic tests for the above.
Original commit message from CVS:
* check/Makefile.am:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
* check/states/sinks2.c:
Moved sinks2 testcode in sinks check.
* gst/gstbin.c: (gst_bin_provide_clock_func), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_recalc_state),
(gst_bin_change_state_func), (bin_bus_handler):
Fix potential race condition when _get_state() iterated over an
ASYNC element right before it posted a state completion.
* gst/gstclock.h:
Do proper cast here.
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
A playback rate of 0.0 is not allowed.
Original commit message from CVS:
* check/gst/gstevent.c: (GST_START_TEST):
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesrc.c: (gst_base_src_default_newsegment):
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Added extra flag to newsegment for future API freeze.
Updated check and base elements.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/states/sinks.c (test_src_sink): Cleanups from the state
change patch.
(test_livesrc_sink): Sync on the state.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Merge from
the state change patch.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/gst/gstghostpad.c (test_ghost_pads): Merge from the state
change patch.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* check/gst/gstbin.c: Merge in some style fixes and additional
checks from Wim's state change patch.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_parse_state_changed):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Added extra field to STATE_CHANGE message with the pending
state, which will be different from the new state soon.
Original commit message from CVS:
2005-10-07 Andy Wingo <wingo@pobox.com>
* check/elements/fakesrc.c (test_no_preroll): New check, checks
that setting a live fakesrc to PAUSED returns NO_PREROLL both
times.
* gst/base/gstbasesrc.c (gst_base_src_change_state): Allow a
NO_PREROLL from gst_element_change_state to fall through.
Original commit message from CVS:
* gst/gstutils.c: (gst_element_link_pads):
fix a bug in the case where neither element has a pad
* check/gst/gstelement.c: (GST_START_TEST), (gst_element_suite):
add a test for that case
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_push), (gst_pad_push_event):
emit have-data before checking for peers. This allows
for probe handlers to connect elements. This helps autopluggers.
* check/gst/gstpad.c: (GST_START_TEST), (_probe_handler),
(gst_pad_suite):
add six checks, linked/unlinked with no/true/false probe
Original commit message from CVS:
* check/gst/gstbin.c:
* check/states/sinks.c:
fix tests for the new warning
* check/gst/gstpipeline.c:
add a test for pipeline and bus interaction
* gst/gstelement.c:
elements should be NULL if they get disposed; add a warning if not
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Change for new bus API.
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
Change for new bus signal API.
* gst/gstbus.c: (gst_bus_class_init), (gst_bus_have_pending),
(gst_bus_source_prepare), (gst_bus_source_check),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (gst_bus_poll), (gst_bus_async_signal_func),
(gst_bus_sync_signal_handler), (gst_bus_add_signal_watch):
* gst/gstbus.h:
Remove support for multiple GSources operating on different
message types as it is too complex and unneeded when using
signals.
Added support for receiving signals from the bus.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_do_simplify):
Thou shalt not free a structure and then continue using it
in the next loop iteration.
* check/gst/gstcaps.c: (check_fourcc_list), (test_simplify),
(gst_caps_suite):
Add test case for caps simplification.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Add bus to bin.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(add_to_queue), (clear_queue), (reset_degree), (update_degree),
(find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state), (gst_bin_dispose):
A bin does not have a bus, it gets the bus from the parent.
* gst/gstelement.c: (gst_element_requires_clock),
(gst_element_provides_clock), (gst_element_is_indexable),
(gst_element_is_locked_state), (gst_element_change_state),
(gst_element_set_bus_func):
Small cleanups.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_init), (gst_pipeline_provide_clock_func):
The pipeline provides a bus.
Original commit message from CVS:
* check/gst/gstpipeline.c: (GST_START_TEST), (gst_pipeline_suite):
add another check
* gst/gstbus.c:
add some doc
* gst/gstinfo.c: (_gst_debug_init):
slightly more readable color for refcount debugging
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Enable check that works now.
* gst/gstbin.c: (add_to_queue), (clear_queue), (reset_outdegree),
(update_outdegree), (find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state):
* gst/gstbin.h:
Redid the state change algorithm using a topological sort algo.
Handles all cases correctly.
Exposed iterator for state change order.
* gst/gstelement.h:
Temp storage for state changes. Need to get rid of this soon.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_subbuffer_init):
Set READONLY flag on subbuffers, so that gst_buffer_make_writable()
works correctly in all circumstances (we could have just copied
the parent buffer's readonly flag, but conceptually it seems
cleaner to mark all subbuffers as read-only). (based on patch
by Alessandro Decina, #314710).
* check/gst/gstbuffer.c: (create_read_only_buffer),
(test_make_writable), (test_subbuffer_make_writable),
(gst_test_suite):
Add some tests for gst_buffer_make_writable().
Original commit message from CVS:
* check/gst/gstbin.c: (test_children_state_change_order_flagged_sink),
(test_children_state_change_order_semi_sink):
Fix test case: we can't rely on a fixed state change order when
going from READY => PAUSED because the sink might commit its
new state first when the first buffer created by the source
reaches the sink before the source has finished its change state.
(Test case still fails at times, see #316856, comment 5 onwards)
Original commit message from CVS:
* check/gst/gstbin.c: (test_children_state_change_order_flagged_sink),
(test_children_state_change_order_semi_sink), (gst_bin_suite):
Added test to check state change order in bins (can still be made
to fail here under heavy disk load; bails out with 'Push on pad
fakesink:sink0, but it was not activated in push mode').
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_change_state):
Fix state change order when there is only a semi sink (#316856)
* gst/gstbus.c: (gst_bus_class_init):
Use _class_peek_parent(), not _class_ref(); fix docs to say
'default main context' instead of 'mainloop' where that is
what's meant.
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_set_state):
Fix typos in debug messages
Original commit message from CVS:
* check/gst/gstvalue.c: (test_date), (gst_value_suite):
Add simplistic test suite for GST_TYPE_DATE serialisation and
deserialisation.
Original commit message from CVS:
2005-09-22 Andy Wingo <wingo@pobox.com>
* gst/gstbuffer.c (gst_buffer_get_caps): Like all our _get
accessors returning refcounted objects, return a ref.
* check/gst/gstbuffer.c (GST_START_TEST): Use refcount-idempotent
accessor for caps. IDEMPOTENCE. Oh yes.
Original commit message from CVS:
2005-09-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstutils.c (test_buffer_probe_n_times): Add tests for
data and event probes on the same pad.
Original commit message from CVS:
2005-09-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstutils.c: New file.
(test_buffer_probe_n_times): A simple buffer probe test. More to
come, foolios.
* gst/gstutils.c (gst_pad_add_buffer_probe): Connect to
have-data::buffer, not have-data.
(gst_pad_add_event_probe): Likewise for have-data::event.
(gst_pad_add_data_probe): More docs. The part about 'resolving the
peer' isn't quite right yet though.
(gst_pad_remove_buffer_probe, gst_pad_remove_event_probe)
(gst_pad_remove_data_probe): Change to take the guint handler_id
as their arg, not the function+data, which is more glib-like.
* gst/gstpad.c (gst_pad_emit_have_data_signal): Add a detail to
the signal emission to indicate if the data is a buffer or an
event.
(gst_pad_get_type): Initialize buffer and event quarks.
(gst_pad_class_init): have-data is now a detailed signal, yes it
is.
Original commit message from CVS:
* check/gst/gstevent.c:
* gst/elements/gstfakesink.c:
* gst/elements/gstfakesink.h:
remove the sync property from fakesink.
has the side effect of setting sync TRUE
for fakesink, which is a change. Anyone who knows how
to fix this nicely in a GObject-y way, feel free.
Original commit message from CVS:
* check/Makefile.am:
disable valgrinding the controller test again
* docs/gst/gstreamer-sections.txt:
update for api-changes
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST), (states_suite):
Add a sleep to ensure elements have a chance to start their
pad tasks before shutdown. Reduces racy test results.
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Time out the select every now and then to check for shutdown.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
enable cleanup again after fixing the leak
* docs/README:
some more info on docs
Original commit message from CVS:
* check/Makefile.am:
re-enable tests now that leaks are plugged
* check/gst/gst.c:
* check/gst/gstbin.c:
* check/gst/gstpipeline.c:
add some more tests while fixing leaks
* common/check.mak:
make sure binaries are uptodate when valgrinding/gdbing
* gst/gst.c:
* gst/gstelementfactory.c:
remove a ref too many, and add a FIXME for when we get
round to disposing of classes
* gst/gstplugin.c:
fix the refcounting when loading a plugin from a file and
the code pretends that the pointer is the same even though
of course it can change
* gst/gstpluginfeature.c:
unref plugins marked cached (a bit confusing as a name)
as the docs state should be done
various doc additions to explain refcounting
* gst/gstregistry.c:
* gst/gstregistryxml.c:
debugging
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
Original commit message from CVS:
* check/gst/gstplugin.c:
* gst/gstelementfactory.c:
* gst/gstplugin.c:
* gst/gstpluginfeature.c:
* gst/gstregistry.c:
Getting tired of debugging. Disabled all the unreffing of
plugins and features, which fixes the segfaults, but of
course leaks like crazy. At least playbin works.
Original commit message from CVS:
* check/Makefile.am:
* check/generic/states.c:
* gst/Makefile.am:
* gst/gst.c:
* gst/gst.h:
* gst/gst_private.h:
* gst/gstelementfactory.c:
* gst/gstindex.c:
* gst/gstinfo.c:
* gst/gstplugin.c:
* gst/gstplugin.h:
* gst/gstpluginfeature.c:
* gst/gstpluginfeature.h:
* gst/gstregistry.c:
* gst/gstregistry.h:
* gst/gstregistrypool.c: remove
* gst/gstregistrypool.h: remove
* gst/gsttypefind.c:
* gst/gsttypefindfactory.c:
* gst/gsturi.c:
* tools/Makefile.am:
* tools/gst-compprep.c:
* tools/gst-inspect.c:
* tools/gst-register.c: remove
* tools/gst-xmlinspect.c:
Registry rewrite. Changes registry from being a file created
by a tool into a simple cache file created automatically by
libgstreamer. Removed gst-register (because it's no longer
needed). Remove registry pools, because we only have one
registry implementation (XML). Fix up other subsystems as
necessary.
Original commit message from CVS:
* check/gst/gstpipeline.c: (GST_START_TEST):
* docs/gst/gstreamer-sections.txt:
* gst/gstutils.c: (set_state_async_thread_func),
(gst_element_set_state_async):
* gst/gstutils.h:
add a gst_element_set_state_async method that
sets the state and starts a thread to make sure the state
change completes as best as it can
Original commit message from CVS:
* check/gst-libs/controller.c:
Header include fix.
* gst/base/gstbasetransform.c:
(gst_base_transform_default_prepare_buf),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
Some more basetransform changes and fixes to enable sub-classes
that modify buffer metadata only.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_init), (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
If the output pad has fixed allowed caps and input buffers
don't have any, set the fixed caps on outgoing buffers.
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
Original commit message from CVS:
* check/gst/gstpad.c: (GST_START_TEST), (name_is_valid),
(gst_pad_suite):
add tests for valid pad naming
* gst/check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func):
add ASSERT_WARNING
remove printing of code, it is fragile when the code contains
% and the line number is enough info
* gst/check/gstcheck.h:
* gst/gstpad.c: (gst_pad_template_new):
fix memleaks
Original commit message from CVS:
* check/Makefile.am:
* check/gst/.cvsignore:
* check/gst/gstpipeline.c: (pop_messages), (GST_START_TEST),
(gst_pipeline_suite), (main):
adding a test for pipelines and state changes
* gst/gstutils.c: (get_state_func):
add some debugging
* gstreamer.spec.in:
fix up spec file
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* check/elements/fakesrc.c: (setup_fakesrc):
* check/elements/identity.c: (setup_identity):
Activate pads before using them.
Original commit message from CVS:
* check/gst-libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
more tests
* docs/gst/tmpl/gstutils.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/tmpl/gstdataprotocol.sgml:
include path fixes
* examples/controller/audio-example.c: (main):
controller example works now
* gst/gstclock.h:
doc fixes
* tools/gst-inspect.c: (print_element_properties_info):
show param spec flags
Original commit message from CVS:
2005-08-26 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Check
element_set_state's return val.
(test_2_elements): Add test that's been disabled for months.
* gst/elements/gstfakesink.c: Cleanups. Add can-activate-push and
can-activate-pull properties.
* gst/elements/gstfakesrc.c: Cleanups. Add can-activate-push and
can-activate-pull properties. Implement is_seekable so fakesrc can
operate in pull mode.
* gst/base/gstbasesink.c (GstBaseSink): Remove has-loop, has-chain
properties.
(gst_base_sink_activate, gst_base_sink_activate_pull)
(gst_base_sink_activate_push): Make activation mode choosing work.
Cleanups.
(gst_base_sink_chain, gst_base_sink_loop): Assert activation mode
is right. Make pull mode work. Post an eos before pausing in pull
mode.
(gst_base_sink_change_state): Pay attention to the core's
change_state() return val.
* gst/base/gstbasesrc.c (GstBaseSrc): Remove has-loop,
has-getrange properties. Cleanups.
* gst/base/gstbasesrc.h (GstBaseSrc): Remove has_loop,
has_getrange and replace with can_activate_pull and
can_activate_push.
* gst/base/gstbasesink.h (GstBaseSink): Rearrange fields, add
locking comments. Remove has_loop, has_chain and replace with
can_activate_pull and can_activate_push.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Cleanup can be done at the end.
* gst/gsttask.c: (gst_task_get_type), (gst_task_finalize),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause):
Oh boy.. Thanks for finding this, Thomas.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Make sure all tasks are stopped.
* check/gst/gstbin.c: (GST_START_TEST):
Unref after usage for proper valgrinding.
* gst/gstpad.c: (gst_pad_finalize), (gst_pad_stop_task):
Really wait for the task to stop before destroying the
mutex.
* gst/gstqueue.c: (gst_queue_sink_activate_push),
(gst_queue_src_activate_push):
Small cleanups. Don't stop the task when we did not start
it.
* gst/gsttask.c: (gst_task_get_type), (gst_task_init),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause),
(gst_task_join):
* gst/gsttask.h:
Protect the stream lock with the object lock.
Disallow setting the stream lock when running.
Add cleanup_all to wait for the threadpool to finish.
Remove code to autoallocate a mutex if none was provided.
Add _join() to wait for a task to stop.
Protect the thread pool with a global lock.
Original commit message from CVS:
* check/Makefile.am:
* check/generic/states.c: (GST_START_TEST), (states_suite), (main):
add a test that does a bunch of state changes on elements
needs some fixing for valgrind
* check/states/sinks.c: (gst_object_suite):
whitespace
* gst/gstcaps.h:
add prototype for gst_caps_is_equal_fixed
* gst/gstplugin.c:
* gst/gstregistrypool.c:
doc fixes
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* gst/gstbin.c: (bin_bus_handler):
* gst/gstmessage.c: (gst_message_finalize), (_gst_message_copy),
(gst_message_new), (gst_message_new_eos), (gst_message_new_error),
(gst_message_new_warning), (gst_message_new_tag),
(gst_message_new_state_changed), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_custom):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
Change GST_MESSAGE_SRC to be a GObject rather than a GstObject, so
that applications can sensibly post custom messages with references
to their own objects.
Original commit message from CVS:
* check/gst-libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* docs/gst/tmpl/gstcaps.sgml:
* docs/gst/tmpl/gstghostpad.sgml:
* docs/gst/tmpl/gstquery.sgml:
* docs/gst/tmpl/gstutils.sgml:
* libs/gst/controller/gst-helper.c: (gst_object_set_controller),
(gst_object_sink_values), (gst_object_get_value_arrays),
(gst_object_get_value_array):
gracefully handle helper method calls to objects that are not beeing
controlled, added test case for that
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
since we don't know when preroll is done, use refcount range
check for the sink
* gst/check/gstcheck.h:
add macro for checking refcount range
Original commit message from CVS:
* check/Makefile.am:
clean up environment for when registry gets built versus
when actual tests are run; valgrind seems to not report
leaks if GST_PLUGIN_PATH is set to some specific values
* check/gst/gstbin.c: (GST_START_TEST):
add more refcounting checks; maybe this exposes a
preroll lock bug ?
* common/check.mak:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/check/gstcheck.h:
* gst/gstbin.c: (bin_element_is_semi_sink), (gst_bin_get_state),
(gst_bin_change_state):
* gst/gstpad.c: (gst_pad_activate_push), (gst_pad_chain):
add/fix debugging/whitespace
Original commit message from CVS:
* check/gst/gstevent.c: (event_probe), (test_event),
(GST_START_TEST):
Er, don't call gst_bin_watch_for_state_change you idiot.
Original commit message from CVS:
* check/Makefile.am:
Use CHECK_CFLAGS and CHECK_LIBS
* check/gst/gstevent.c: (event_probe), (test_event),
(GST_START_TEST):
Don't leak events.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_start), (gst_base_src_stop),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Sprinkle gst_base_src_stop liberally around error paths to fix
problems reusing a source after failed state changes.
* gst/base/gsttypefindhelper.c: (helper_find_peek),
(helper_find_suggest), (gst_type_find_helper):
Extra debug output. Don't segfault on GST_PAD_GETRANGEFUNC = NULL
* gst/gstevent.h:
* docs/gst/tmpl/gstevent.sgml:
Migrate part of the docs from the SGML file. Wait for ensonic to
tell me how I did it wrong ;)
* tools/gst-typefind.c: (main):
Extra robustness to state changes between files.
Original commit message from CVS:
* check/Makefile.am:
don't valgrind the controller test - it's leaking - Stefan, HELP
* gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_chain_func), (gst_check_setup_element),
(gst_check_teardown_element), (gst_check_setup_src_pad),
(gst_check_teardown_src_pad), (gst_check_setup_sink_pad),
(gst_check_teardown_sink_pad):
* gst/check/gstcheck.h:
add a bunch of methods to set up elements, and src and sink pads
* check/elements/fakesrc.c: (setup_fakesrc), (cleanup_fakesrc):
* check/elements/identity.c: (setup_identity), (cleanup_identity),
(GST_START_TEST):
use them
* gst/gstmessage.c:
* gst/gsttag.h:
whitespace/doc fixes
Original commit message from CVS:
* check/Makefile.am:
set GST_TOOLS_DIR
* gst/check/gstcheck.c: (gst_check_message_error):
* gst/check/gstcheck.h:
add a fail_unless_equals_int
add fail_unless for error messages
Original commit message from CVS:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite):
Should fix build on 64-bit arch's
Original commit message from CVS:
2005-08-18 Andy Wingo <wingo@pobox.com>
Make sure that when a pipeline goes to PLAYING, that data has
actually hit the sink.
* check/states/sinks.c (test_sink): A sink that doesn't get any
data shouldn't return SUCCESS for going to either PLAYING or
PAUSED. Test also the return values on the way back down.
* gst/gstelement.c (gst_element_set_state): When changing the
state of an element currently changing state asynchronously, go to
lost-state after commiting the pending state. Makes future calls
to get_state continue to return ASYNC.
* gst/base/gstbasesink.c (gst_base_sink_change_state): Return
ASYNC when going to PLAYING if we still don't have preroll, as can
happen with live sources.
Original commit message from CVS:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite):
Provide more error margin in clock measurements to allow for
g_get_current_time inaccuracies.
Original commit message from CVS:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite):
Fix error message output so I might be able to tell why the
test works here but fails on the build farm.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
2005-08-17 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasetransform.c: Debug changes.
* gst/gstutils.h:
* gst/gstutils.c (gst_bin_watch_for_state_change): Add function to
ensure bins post state change messages. A bit of a hack but I can't
think of a way to avoid it.
* check/gst/gstbin.c (test_watch_for_state_change): Added test.
Original commit message from CVS:
* check/Makefile.am:
add a .check target for running the check
* check/gst-libs/controller.c: (GST_START_TEST):
cosmetic fixups
* check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
complete checks for gstbuffer; would be nice if I could get the
gcov stuff to work so I can see if I actually completed gstbuffer.c
* check/gstcheck.h:
add ASSERT_BUFFER_REFCOUNT
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added test for removing an element with ghostpad from a bin.
Fixed test as current implementation does the right thing.
* gst/gstghostpad.c: (gst_proxy_pad_class_init),
(gst_proxy_pad_do_query_type), (gst_proxy_pad_do_event),
(gst_proxy_pad_do_query), (gst_proxy_pad_do_internal_link),
(gst_proxy_pad_do_bufferalloc), (gst_proxy_pad_do_activate),
(gst_proxy_pad_do_activatepull), (gst_proxy_pad_do_activatepush),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target),
(gst_proxy_pad_get_target), (gst_proxy_pad_init),
(gst_proxy_pad_dispose), (gst_proxy_pad_finalize),
(gst_ghost_pad_class_init), (gst_ghost_pad_do_activate_push),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_set_internal), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_notarget), (gst_ghost_pad_new),
(gst_ghost_pad_get_target), (gst_ghost_pad_set_target):
* gst/gstghostpad.h:
Clean up ghostpads, remove properties for internal stuff.
Make threadsafe.
Fix refcounting.
Prepare for switching targets, not all use cases work yet.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST), (gst_bin_suite):
Added checks for hierarchy consistency whan adding linked
elements to bins.
* check/gst/gstelement.c: (GST_START_TEST), (gst_element_suite):
Added check to test element scheduling without bin/pipeline.
* check/pipelines/simple_launch_lines.c: (GST_START_TEST):
First add elements to bin, then link.
* gst/gstbin.c: (unlink_pads), (gst_bin_add_func),
(gst_bin_remove_func):
Unlink pads from elements added/removed from bin to maintain
hierarchy consistency.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added some more tests for wrong hierarchy
* docs/design/part-overview.txt:
Some updates.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_dispose):
Cleanups.
* gst/gstelement.c: (gst_element_remove_pad), (gst_element_seek),
(gst_element_dispose):
Some more cleanups.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_check_hierarchy), (gst_pad_link_prepare),
(gst_pad_get_caps_unlocked), (gst_pad_accept_caps),
(gst_pad_set_caps), (gst_pad_send_event):
Check for correct hierarchy when linking pads. Moving to
strict requirement for ghostpads when linking elements in
different bins.
* gst/gstpad.h:
Clean ups. Added WRONG_HIERARCHY return value.
Original commit message from CVS:
Removed plugable schedulers.
Removed Scheduler/Manager from elements.
Removed gsttypes.h, rearranged includes.
Removed dependency pad<->element, element<>pipeline, and
various others, fix includes.
implement gst_pad_get_parent() with gst_object_get_parent()
Make GstTask sefcontained.
Fix _get_state() on GstBin, it did not return ASYNC with a 0
timeout.
Fix endless loop in iterator_fold_with_resync.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Make elements silent as the deep_notify refs the
parent, which might make the test fail.
* gst/gstghostpad.c: (gst_ghost_pad_do_activate_push):
Don't hold the lock for too long.
Original commit message from CVS:
* testsuite/caps/Makefile.am:
* testsuite/caps/value_compare.c:
* testsuite/caps/value_intersect.c:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
move two testsuite apps over to the check dir
Original commit message from CVS:
* check/Makefile.am:
add two more tests for valgrinding
* check/gst/gstvalue.c: (GST_START_TEST):
test refcount of deserialized buffer, found a leak
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/tmpl/gstminiobject.sgml:
add miniobject to docs
* gst/gstminiobject.c:
add some docs
* gst/gstvalue.c: (gst_value_deserialize_buffer),
(gst_string_unwrap):
fix a hard-to-find invalid write for one of the tests
fix a leak for deserialized buffers
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST),
(gst_bin_suite):
add more things to check
* gst/gstbin.c: (gst_bin_change_state), (bin_bus_handler):
* gst/gstelement.c:
more debug
Original commit message from CVS:
* check/gst/gstbin.c: (START_TEST), (gst_bin_suite):
add test for state change message on a bin
* check/gst/gstelement.c: (START_TEST), (gst_element_suite):
add another test
* gst/gstbin.c: (gst_bin_init):
* gst/gstbus.c: (gst_bus_init), (gst_bus_post):
* gst/gstelement.c: (gst_element_post_message),
(gst_element_set_state):
* gst/gstelementfactory.c: (gst_element_factory_create):
* gst/gstmessage.c: (gst_message_new):
* gst/gstscheduler.c:
various debugging additions and cleanups
Original commit message from CVS:
* check/gst/gstpad.c:
* check/gstcheck.c:
* gst/gstpad.c: (gst_pad_get_internal_links_default):
if pad has no parent, return NULL as list of internal links
Original commit message from CVS:
2005-07-05 Andy Wingo <wingo@pobox.com>
* check/gst/gstbus.c (pound_bus_with_messages):
* check/gst/gstmessage.c (START_TEST):
* check/pipelines/simple_launch_lines.c (got_handoff): Application
message API change.
* gst/base/gstbasetransform.c (gst_base_transform_setcaps): More
logic weaks here: always run transform_caps, trying passthrough
operation only if the original caps intersects with the transform.
* gst/gstpad.c (gst_pad_link_check_compatible_unlocked): Debug
source and sink caps.
* gst/base/gstbasetransform.c (gst_base_transform_getcaps):
Intersect the peer caps with the pad template before going into
transform_caps.
(gst_base_transform_transform_caps): More debugging.
* gst/gstmessage.h (gst_message_new_application): Take a GstObject
src argument.
Original commit message from CVS:
* check/Makefile.am:
* gst/gst.c: (add_path_func), (init_pre):
* gst/gstregistry.c: (gst_registry_add_path):
add A GST_PLUGIN_PATH_ONLY env var; if it is set, it will
only scan the GST_PLUGIN_PATH locations, and not add
system locations
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
* check/gst/gstvalue.c: (START_TEST), (gst_value_suite):
* gst/gstvalue.c: (gst_value_deserialize_int_helper):
remove gst_strtoll completely, since it didn't actually do
anything more than what g_ascii_strtoull already does.
check for range errors when deserializing
do a cast for the unsigned cases; but further fixing needs
a decision on what the interpretation of "(int)" and
deserialization should be for values that fall outside the
type's boundaries (ie, refuse, or interpret as casting)
Original commit message from CVS:
Added support for live sources and other elements that
cannot do preroll.
Updated design docs, added live-source design doc.
Implemented live source functionality in basesrc
Fix error condition in _bin_get_state()
Implement live source handling in -launch.
Added check for live sources.
Fixed case in GstBin where elements were changed state
multiple times.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/capslist.h:
copy over from 0.8, and add two with bitmasks specified with
(int) 0xFF...
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite):
add test to parse everything from capslist.h
* check/gst/gststructure.c: (START_TEST), (gst_value_suite),
(main):
add test for structure deserialization
* check/gst/gstvalue.c: (START_TEST), (gst_value_suite):
add tests for deserialization of strings to int types
* gst/gststructure.c: (gst_structure_nth_field_name):
* gst/gststructure.h:
add a way to get the name of a field referenced by index
* gst/gstvalue.c: (gst_value_deserialize_int_helper):
instead of checking if the resulting long long lies between
min and max, we check if the long long would fit into
a number of bytes for the final type.
This fixes cases where a string represents 2^32 - 1, which
when cast to int would be the (valid) -1, but is bigger than
G_MAXINT
Original commit message from CVS:
* check/gst/gstvalue.c: (START_TEST):
* gst/gstvalue.c: (gst_value_deserialize):
return long long, not int, so gint64 deserialization actually
works. Is there any flag that makes the compiler check this ?
Fixes#308559
Original commit message from CVS:
* check/gst/.cvsignore:
* check/gst/gstvalue.c: (START_TEST), (gst_value_suite):
add a test deserializing int64, and comment part out because
it fails, yay !
Original commit message from CVS:
* check/gstcheck.h:
add macros for checking refcounts on objects and caps
* check/gst/gstpad.c: (START_TEST), (gst_pad_suite):
add some more unit tests
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_allowed_caps):
fix leaked refcounts (I hope :)) so unittest works
* gst/gstpad.h:
whitespace removal
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* check/gst-libs/.cvsignore:
* check/gst/.cvsignore:
* check/pipelines/.cvsignore:
ignore more
* check/pipelines/cleanup.c: (setup_pipeline), (run_pipeline),
(START_TEST), (cleanup_suite), (main):
add some tests related to cleanup after running pipelines
Original commit message from CVS:
2005-05-16 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (sink_iterator_filter): Err... um...
* check/gst/gstbin.c (test_ghost_pads): New test for the
ghosting-if-elements-not-in-same-bin behavior.
Original commit message from CVS:
2005-05-05 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (test_2_elements): "Fix"
the test suite.
Original commit message from CVS:
* check/Makefile.am:
fix the broken rule for cleanup. Apparently this rule is
only needed on FC2, so maybe this warrants further autotool
inspection.
Original commit message from CVS:
* check/gst/gstpad.c: (START_TEST): Oh yeah, it's always nice to
make the regressions tests work. Remove some code that is no
longer true.
* gst/gstpad.c: (gst_pad_link_check_templates_compatible_unlocked):
Disable warning for pads without templates.
Original commit message from CVS:
* check/gst/gstbus.c: (gstbus_suite):
* check/gst/gstdata.c: (thread_ref), (gst_data_suite):
* check/gstcheck.h:
Fix up the timeout so that the test does not fail.
Original commit message from CVS:
2005-03-29 Andy Wingo <wingo@pobox.com>
* docs/gst/Makefile.am:
* docs/libs/Makefile.am: Dist the overrides files.
* check/Makefile.am (clean-local): Remove .libs directories.
* gst/elements/Makefile.am (EXTRA_DIST): Add all the attic
elements to EXTRA_DIST, so po/ files are happy.
Original commit message from CVS:
2005-03-29 Andy Wingo <wingo@pobox.com>
* po/, docs/gst/: Commit automatic changes to docs and po files.
* gst/elements/Makefile.am (libgstelements_la_LDFLAGS): Link to
the versioned libgstbase.
* check/Makefile.am: Depend on an unversioned gst-register, seems
to make autoconf happier.
* gst/base/Makefile.am: Make libgstbase a versioned lib.
Original commit message from CVS:
Next big merge.
Added GstBus for mainloop integration.
Added GstMessage for sending notifications on the bus.
Added GstTask as an abstraction for pipeline entry points.
Removed GstThread.
Removed Schedulers.
Simplified GstQueue for multithreaded core.
Made _link threadsafe, removed old capsnego.
Added STREAM_LOCK and PREROLL_LOCK in GstPad.
Added pad blocking functions.
Reworked scheduling functions in GstPad to prepare for
scheduling updates soon.
Moved events out of data stream.
Simplified GstEvent types.
Added return values to push/pull.
Removed clocking from GstElement.
Added prototypes for state change function for next merge.
Removed iterate from bins and state change management.
Fixed some elements, disabled others for now.
Fixed -inspect and -launch.
Added check for GstBus.
Original commit message from CVS:
Added GstBin test.
Added GstSystemClock test.
Implemented clock distribution code in GstBin.
Implemented iterate sinks method for future use.
Rearranged gstelement.h
Fix GstIterator comparison bug.
Moved some code to GstPipeline, mostly clocking related.
