mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-24 18:51:11 +00:00
Code Issues 1 Projects Releases Wiki Activity
15803 commits 44 branches 1509 tags 391 MiB
Commit graph

3661 commits

Author SHA1 Message Date
Nicolas Dufresne
d45623f532 ladspa: Fix compilation issue when lrdf is enabled 
https://bugzilla.gnome.org/show_bug.cgi?id=700328
 2013-05-14 19:52:47 +01:00
Juan Manuel Borges Caño
30d7908df2 openal: improved port to 1.0 
https://bugzilla.gnome.org/show_bug.cgi?id=698013
 2013-05-13 23:48:01 +01:00
Tim-Philipp Müller
0c1f059245 dirac: remove old dirac-research library based codec 
It's not developed any more and replaced by the
libschroedinger-based elements in gst-plugins-good.
(The libschroedinger 1.0.9 release notes state "This
is an exciting release: most of the encoding tools in
dirac-research have been ported over to Schrödinger, so
now schro has the same or better compression efficiency
as dirac-research.")
 2013-05-12 23:51:32 +01:00
Tim-Philipp Müller
020c93b973 ofa: port to 1.0 2013-05-12 23:42:06 +01:00
Tim-Philipp Müller
0c23ac0565 musicbrainz: remove trm element which is not useful any more 
TRM IDs are MusicBrainz' old audio fingerprinting system from
Relatable, they were phased out in favour of MusicIPs PUIDs.

https://wiki.musicbrainz.org/History:TRM
 2013-05-12 20:57:25 +01:00
Tim-Philipp Müller
b3e70d30cf neonhttpsrc: add support for SCHEDULING query 2013-05-12 18:52:56 +01:00
Tim-Philipp Müller
e1f4f5ccaa neonhttpsrc: add iradio-mode property and post icy metadata as tags 2013-05-12 18:52:56 +01:00
Tim-Philipp Müller
ca3a83a60d neonhttpsrc: port to 1.0 2013-05-12 18:52:55 +01:00
Sebastian Dröge
275e104be6 egl: Add destroy notify instead of always calling eglTerminate() on the display 
In some scenarios, for example in QtWebKit, might be difficult to obtain full
control on the egl display and it might be only accessible indirectly via
eglGetCurrentDisplay().

https://bugzilla.gnome.org/show_bug.cgi?id=700058
 2013-05-10 12:50:05 +02:00
Tim-Philipp Müller
0d7967e25e dashdemux: rename src template from src%d to src_%u 2013-05-08 23:17:08 +01:00
Thiago Santos
573a4d440c dash: remove superfluous files 
Authors and license are at the top of the source files
 2013-05-08 18:59:31 -03:00
Thiago Santos
919cb34fee dash: do not use deprecated glib mutex API 2013-05-08 18:14:46 -03:00
Thiago Santos
34e1b59eca dashdemux: fixing compiler warnings about print formats 2013-05-08 18:14:46 -03:00
Thiago Santos
5855511ba4 dash: enable in configure/makefiles 
It was intentionally disabled up to this point to prevent
compile failures as dashdemux development commits were all for
0.10 up to here
 2013-05-08 18:14:46 -03:00
Thiago Santos
9f190cdff7 dashdemux: port to 1.0 2013-05-08 18:14:46 -03:00
Thiago Santos
b338cc0d34 dashdemux: Fix another wrong assertion 
Also adds a couple log messages for easier debugging
 2013-05-08 18:14:46 -03:00
Thiago Santos
3472efda75 dashdemux: remove wrong asserts 
Those asserts should be the contrary that they are. And also
the surround functions should already check that. Removing them.
 2013-05-08 18:14:46 -03:00
Wim Taymans
665d59edba dashdemux: only start timestamp from 0 for live stream 
We only want to adjust the timestamps so that they start from 0 for live
streams. Non-live streams already start from 0 and after a seek we actually want
to timestamp to be the position we seek to.
 2013-05-08 18:14:45 -03:00
Wim Taymans
4f9f0b84cf dashdemux: make timestamps start from 0 
Non-live streams should timestamp buffers with a running-time starting from
0. Since we already push a 0 -> -1 segment, bring the timestamps to 0
by subtracting the initial timestamp.
 2013-05-08 18:14:45 -03:00
Wim Taymans
4ab58e0fb1 dashdemux: also send newsegment on startup 2013-05-08 18:14:45 -03:00
Wim Taymans
cfcaa23959 dashdemux: small cleanup 2013-05-08 18:14:43 -03:00
Thiago Santos
afccf149af dashdemux: live stream playback crashfix 2013-05-08 18:14:42 -03:00
Thiago Santos
d9baed8302 dash: mpdparser: do not cleanup xml lib too early 
The xmlCleanupParser function seems to cleanup all statically
allocated libxml variables, making it unusable. We can't guarantee
that dashdemux won't need it anymore, so better not call it.
 2013-05-08 18:14:42 -03:00
Thiago Santos
14feeb3ccb dashdemux: reimplementing live streams manifest updates 
Manifest updates should be done periodically for live streams,
this patch makes the demuxer create a new manifest client for
the new version and transfers the stream position to the new
one, discarding the old one afterwards.
 2013-05-08 18:14:42 -03:00
Thiago Santos
b01a3729c0 dash: mpdparser: allow periods without start time for live streams 
Live streams can have undefined start times for the periods and
mpdparser can let that pass instead of erroring out
 2013-05-08 18:14:41 -03:00
Thiago Santos
cff4498f7c dash: mpdparser: use guint64 for timestamps 
The timestamps can be pretty big, so use guint64 for them
 2013-05-08 18:14:41 -03:00
Thiago Santos
a53fd87508 dashdemux: mpd parsing: fix query parameter parsing 
Try harder to detect URL parameters and split them to accomodate
the fragment url in the concat:

base-url + fragment-url + url-parameters
 2013-05-08 18:14:41 -03:00
Thiago Santos
4ca530f2fe dashdemux: plug some leaks 
Add some missing free/unrefs spotted by valgrind
 2013-05-08 18:14:41 -03:00
Thiago Santos
c82606a600 dashdemux: remove unused mutexes 2013-05-08 18:14:41 -03:00
Thiago Santos
737d328bb5 dashdemux: properly reset stream status after a flush 
The stream eos/end of period status must also be reset after a flushing
seek. This makes seeking after EOS work.
 2013-05-08 18:14:41 -03:00
Andre Moreira Magalhaes (andrunko)
fbbf713e45 dashdemux: keep a list of streams periods 
Keep a list of streams per period so that the download loop can keep
downloading while the stream loop is still pushing old period's data.
 2013-05-08 18:14:41 -03:00
Andre Moreira Magalhaes (andrunko)
b9272dc0e6 dashdemux: Properly parse base uri from mpd. 2013-05-08 18:14:40 -03:00
Andre Moreira Magalhaes (andrunko)
6ecb58c4f8 dashdemux: Remove unused members. 2013-05-08 18:14:40 -03:00
Andre Moreira Magalhaes (andrunko)
497500dbfe dashdemux: Only send newsegment on seek. 2013-05-08 18:14:40 -03:00
Thiago Santos
3bc62ccc51 dashdemux: send segments that overwrite previous ones 
This is only done for seeks, so it is fine
 2013-05-08 18:14:40 -03:00
Andre Moreira Magalhaes (andrunko)
2b83b4410c dashdemux: switch bitrates without switching pads 2013-05-08 18:14:40 -03:00
Andre Moreira Magalhaes (andrunko)
11697b9968 dashdemux: Remove unusued method. 2013-05-08 18:14:40 -03:00
Andre Moreira Magalhaes (andrunko)
daea47d3f4 dashdemux: Set stream need_header after seek and has_data_queued to FALSE when flushing stream. 2013-05-08 18:14:40 -03:00
Thiago Santos
4a9d7f0a9f dashdemux: do not pause/start the stream loop on playing/paused changes 
The demuxer shouldn't care about paused/playing, it should act the
same in both states
 2013-05-08 18:14:39 -03:00
Thiago Santos
2fe509d50a dashdemux: remove property that isn't used anymore 
Remove some pieces of code that are from an old property
that isn't used anymore
 2013-05-08 18:14:39 -03:00
Thiago Santos
460542daaf dashdemux: add a downloadrate utility 
A small struct that keeps a short history of fragment download bitrates
to have an average measure of N last fragments instead of using only
the last downloaded bitrate
 2013-05-08 18:14:39 -03:00
Thiago Santos
28449ce7d1 dashdemux: sprinkling some more log 2013-05-08 18:14:39 -03:00
Thiago Santos
94dcb60127 dashdemux: change bitrates based on the stream bitrate 
Do not use a global bitrate as the sizes of the fragments matter
when calculating the download rate as the connection setup time is
also being taken into the download duration, a smaller fragment
will have a lower bitrate than a larger one.

This avoids switching the bitrates for streams frequently because
of bitrate mismatches
 2013-05-08 18:14:39 -03:00
Thiago Santos
770df6277a dashdemux: refactor to use the uridownloader lib instead of internal copy 2013-05-08 18:14:39 -03:00
Andre Moreira Magalhaes (andrunko)
5efedbff0a dashdemux: Make sure switch_pads won't leak any pad. 2013-05-08 18:14:39 -03:00
Andre Moreira Magalhaes (andrunko)
e92531c8f6 dashdemux: Properly stop download and stream tasks where appropriate. 2013-05-08 18:14:39 -03:00
Thiago Santos
288903a203 dashdemux: avoid an assertion when stopping the pipeline 
Avoids asserting when dataqueues are setting to flushing due
to a pipeline stop during a pad switch.
 2013-05-08 18:14:39 -03:00
Thiago Santos
83c0e1e25d dashdemux: download the next fragment with smaller timestamp 
Instead of downloading 1 fragment per stream per download loop,
select the stream with the earlier timestamp and get a fragment
only for that one.

The old algorithm would lead to problems when the fragment durations
were too different for streams.
 2013-05-08 18:14:39 -03:00
Thiago Santos
dbd6bde9d1 dashdemux: track segments in the demuxer 
Use a GstSegment to track the current segment information in the
demuxer.
 2013-05-08 18:14:38 -03:00
Thiago Santos
39924c60a1 dashdemux: remove buffering message emission from dashdemux 
dashdemux shouldn't emit the buffering message as that can pause
the pipeline. It has no proper knowledge of the downstream buffering
status so it can pause the pipeline when it isn't necessary. It should
have an internal buffer for downloading the streams ahead of playback,
but that shouldn't make it able to stop the pipeline for buffering.

A particular case in which this is bad is when a pad switch happens
(changing bitrates for example), the new pads dashdemux creates
will get linked to demuxers and new queues will be created,
these queues are initially empty and dashdemux will quickly
drain its buffers by pushing them to those queues. So it
would have no more buffers internally and would emit a
buffering message with a low ratio, causing the pipeline
to pause when it wouldn't be necessary.
 2013-05-08 18:14:35 -03:00
Thiago Santos
10b5d4d1cc dashdemux: removing unused code 
Cleaning up by removing unused code and variables
 2013-05-08 18:14:35 -03:00
Thiago Santos
0d9b5923af dashdemux: re-enable and fix adaptive switching 
It is still unstable, but at least it works when the switches aren't
happening after every fragment
 2013-05-08 18:14:34 -03:00
Thiago Santos
2d85107299 dashdemux: correctly signal EOS on manifest end 
Put EOS on the streams queues after the last fragment from the
last period for each stream. This way we keep it serialized
with the buffers and it will work when streams have different
ending times
 2013-05-08 18:14:34 -03:00
Thiago Santos
a19c689dfa dashdemux: detect end-of-period correctly 
Detect end of period when there are no more buffers on any of the
streams
 2013-05-08 18:14:34 -03:00
Thiago Santos
3a055ac2d1 dashdemux: Use the smallest queue value to define buffering state 
The smallest queue should be used to prevent blocking the download
thread when a stream has too much data buffered, leaving the other
streams starving from fragments
 2013-05-08 18:14:34 -03:00
Thiago Santos
9777fc5cb5 dash: fix parsing of streams to get correct fragment durations 
Use the current stream base time instead of the 0th stream base time
to get default duration for fragments.
 2013-05-08 18:14:34 -03:00
Thiago Santos
54542a6000 dashdemux: block waiting for buffers instead of busy wait 
Make the streaming loop block waiting for buffers on the queues instead
of busy waiting eating cpu continuously on a queue length check
 2013-05-08 18:14:34 -03:00
Thiago Santos
80c6973319 dashdemux: fix seeking on multiple streams 
Each stream has its own durations and timestamps, the fragment number
is different for each stream when seeking, so the seek has to be done
for all streams, rather than on a single stream and propagated to
others
 2013-05-08 18:14:34 -03:00
Thiago Santos
7330225ac8 dashdemux: Replace GQueue by GstDataQueue 
GstDataQueue has proper locking and provides functions to limit the
size of the queue. Also has blocking calls that are useful to
our multithread scenario in Dash.
 2013-05-08 18:14:34 -03:00
Thiago Santos
27b1abbda3 dashdemux: move the buffers queues to the streams 
Store the buffers separately for each stream, this is clearer than
having a queue with a list of buffers. It also allows easier selection
of buffers to push in later refactors
 2013-05-08 18:14:34 -03:00
Thiago Santos
1556d8cb03 dashdemux: refactor streams data to its own struct 
Keeps code more organized and similar to what other demuxers
usually do
 2013-05-08 18:14:33 -03:00
Thiago Santos
f46ba44e99 dash: do not try to print a pointer as a string 2013-05-08 18:14:33 -03:00
Thiago Santos
f27bb684f7 dashdemux: Remove timing code that delays pushing of fragments 
Fragments should be pushed ASAP as downstream should be responsible for
doing the syncrhonization and proper buffering.

This has the great side effect of fixing most of the seeking A/V sync issues.
 2013-05-08 18:14:33 -03:00
Thiago Santos
a1447a8ede dash: fixing build warnings 
Also running through gst-indent
 2013-05-08 18:14:33 -03:00
Louis-Francis Ratté-Boulianne
6acf2fba8f gstdashdemux: add need_header member to know whether the initialization fragment should be pushed 2013-05-08 18:14:33 -03:00
Louis-Francis Ratté-Boulianne
0bed9a6646 dashdemux: don't wait for the whole duration of a fragment when seeking 2013-05-08 18:14:33 -03:00
Louis-Francis Ratté-Boulianne
489d7a174c dashdemux: switch pads and send header file when a newsegment event is sent 2013-05-08 18:14:33 -03:00
Louis-Francis Ratté-Boulianne
04004cdf65 dashdemux: various fixes 2013-05-08 18:14:33 -03:00
David Corvoysier
c901f610c2 Applied gst-indent 2013-05-08 18:14:33 -03:00
David Corvoysier
582aa51fd6 Replaced URL pointing to obsolete Klagenfurt MPD by a new one 2013-05-08 18:14:33 -03:00
Gianluca Gennari
c988ee3a4b mpdparser: fix escape sequence in URL template resolving 2013-05-08 18:14:33 -03:00
Gianluca Gennari
470c860ffa mpdparser: do not switch pads when bitstreamSwitching = true 2013-05-08 18:14:32 -03:00
Gianluca Gennari
e0c55050e1 dashdemux: complete support for manifest file updates 2013-05-08 18:14:32 -03:00
Gianluca Gennari
7092a9c1ac dashdemux: add support for manifest file updates 
- the MPD file is updated in the download loop (only if we have a "dynamic" MPD and minimumUpdatePeriod is valid);
- properly LOCK/UNLOCK the GstMpdClient;
 2013-05-08 18:14:32 -03:00
Gianluca Gennari
7371b7997b dashdemux: new API to set/get segment index and period index 
TODO: rework segment selection to support Representations or Adaptation Sets with segments not aligned
 2013-05-08 18:14:32 -03:00
Gianluca Gennari
e7fad847bb dashdemux: new API to load the stream Period with a given index 
this avoids to fiddle with stream internals in the code
 2013-05-08 18:14:32 -03:00
Gianluca Gennari
9d43e33319 dashdemux: implement seeking across Periods 2013-05-08 18:14:32 -03:00
David Corvoysier
f7c6403432 Applied gst-indent 2013-05-08 18:14:32 -03:00
David Corvoysier
e323c099a0 By default, do not forward pad queries upstream, because it may have unforessen side-effects (forwarding the new 1.0 GST_CAPS query would prevent pad linking for instance) 2013-05-08 18:14:32 -03:00
Olivier Blin
d058a7f2b2 plugin: register as dashdemux instead of fragmented 
This fixes conflicts with the HLS plugin, which is also named
fragmented.
When building its registry, gstreamer was picking one or the other
between hls and dashdemux.
 2013-05-08 18:14:31 -03:00
Gianluca Gennari
895e804a86 dashdemux: check if we have received the MPD file in the proper way 2013-05-08 18:14:31 -03:00
Gianluca Gennari
8f13f246e0 mpdparser: silence warning 2013-05-08 18:14:31 -03:00
Olivier Blin
0b5eb519e7 dashdemux: fix printing buffering time and download rate/size 
This was broken on armv7.
 2013-05-08 18:14:31 -03:00
Olivier Blin
bd2784ffbb dashdemux: fix unused-but-set variable 2013-05-08 18:14:30 -03:00
Olivier Blin
cbebb01f23 dashdemux: use new gst_mpd_client_get_next_fragment_duration API 
This fixes build that has been broken by commit
fb9aeac6552021b176a4c4bd07265e02a0b70e0f.

gst_mpd_client_get_target_duration has been removed, and
gst_mpd_client_get_next_fragment_duration should be used instead.
 2013-05-08 18:14:29 -03:00
Gianluca Gennari
f728e424b2 dashdemux: remove FIXME comment 
pad switching across multiple periods works perfectly fine now
and it is done only when there is a change in the CAPS
 2013-05-08 18:14:29 -03:00
Gianluca Gennari
e96cc18ab9 dashdemux: send new-segment events to all pads 2013-05-08 18:14:27 -03:00
Gianluca Gennari
9387365fc9 dashdemux: reworked the API to retrieve fragment timestamp, fragment duration and media presentation duration 
This was necessary to support variable-duration Fragments.

in the new API:
- gst_mpd_client_get_current_position returns the timestamp of the NEXT fragment to download;
- gst_mpd_client_get_next_fragment_duration returns the duration of the next fragment to download;
- gst_mpd_client_get_media_presentation_duration returns the mediaPresentationDuration from the MPD file;

also there is a new internal parser function:
- gst_mpd_client_get_segment_duration extracts the constant segment duration from the MPD file
(only used when there is no SegmentTimeline syntax element in the current representation)

In gst_mpd_client_get_next_fragment, we set the timestamp/duration of the fragment just downloaded
copying the values from the corresponding GstMediaSegment.

TODO: rework SEEKING to support seeking across different Periods.
 2013-05-08 18:14:25 -03:00
Gianluca Gennari
dc5d7d258e dashdemux: use effective segment duration to reschedule the streaming task 
do not assume segment duration is constant

Conflicts:

	ext/dash/gstdashdemux.c
 2013-05-08 18:14:22 -03:00
Gianluca Gennari
cfcd9ffac6 dashdemux: reworked gst_dash_demux_get_buffering_time() to return the effective buffering time 
do not assume the Fragment duration is constant
 2013-05-08 18:14:16 -03:00
Gianluca Gennari
0abd777257 dashdemux: complete support for Media Presentations with several Periods 
- Periods are played in sequence, from PeriodStart to PeriodEnd
- seamless switching from one Period to the next one works fine;
- the 'new-segment' generation is broken, so if we need to switch pads for a new Period there is a crash;
 2013-05-08 18:14:10 -03:00
Gianluca Gennari
9d09e99ebe mpdparser: initial support for Media Presentations made of several Periods 
- build a list of the available Periods with their start and duration time
- add the list of GstStreamPeriod in the GstMpdClient data struct
- remove cur_period from GstMpdClient and introduce an API to get the current GstStreamPeriod
- several API clean-ups
 2013-05-08 18:14:10 -03:00
Olivier Blin
ba3bd1c69a mpdparser: support BaseURL for SegmentURL using mediaRange 
This is used in big_buck_bunny_CappedVBR_Multirate_4s_0_AudioVideo_MainProfile.mpd
 2013-05-08 18:14:10 -03:00
Olivier Blin
767a5ebed0 mpdparser: factorize adding range parameter to URL 2013-05-08 18:14:08 -03:00
Gianluca Gennari
53f383eff0 dashdemux: reworked caps detection 
also reworked the API to extract audio/video parameters from the manifest file
(mimeType, width, height, rate, num channels)
 2013-05-08 18:14:06 -03:00
Gianluca Gennari
fe05060044 dashdemux: do not send bogus duration messages when mediaPresentationDuration is unknown 2013-05-08 18:14:03 -03:00
Gianluca Gennari
fba69179e4 mpdparser: support SegmentTimeline syntax also for list-based media segment generation 2013-05-08 18:14:03 -03:00
Gianluca Gennari
362b5e9446 mpdparser: add support for SegmentTimeline syntax elements 
build the list of segments to be played using the SegmentTimeline syntax, if present
bugfixes:
- for dynamic MPD files, when mediaPresentationDuration is not present use minimumUpdatePeriod instead
- do not add a spurious '$' when building an URL from a template like "$Bandwidth$/init.mp4v"
- introduce gst_mpd_client_add_media_segment() to avoid code duplication
 2013-05-08 18:14:03 -03:00
David Corvoysier
41733d8296 Fixed wrong index in fragments 2013-05-08 18:14:03 -03:00
Gianluca Gennari
8e9ba056d7 mpdparser: fix memory leak in gst_mpd_client_get_next_fragment_set() 
we have to free next_fragment_uri
 2013-05-08 18:14:03 -03:00
David Corvoysier
cf0ab8e1f3 Removed unused function 2013-05-08 18:14:03 -03:00
David Corvoysier
84c8de8ab6 Seek event handling cleanup 2013-05-08 18:14:02 -03:00
Gianluca Gennari
b580ee8cd7 dashdemux: fix playing of single-segment media streams 
other fixes:
- fixed a buffering bug: now we stop buffering when we reach the end of manifest
- now gst_mpd_client_get_target_duration() always returns a valid duration
(in case of single-segment streams, we return either Period duration or mediaPresentation duration)
TODO: support SegmentTimeline
 2013-05-08 18:14:02 -03:00
Gianluca Gennari
5ade664680 uridownloader: deleted useless declaration of gst_uri_downloader_free() 2013-05-08 18:14:00 -03:00
Gianluca Gennari
122f10669f uridownloader: when possible, reuse existing element to download a new URI 
previously a new element was allocated for each media segment, and it was never freed
 2013-05-08 18:14:00 -03:00
Gianluca Gennari
5b830c3c91 dashdemux: unref caps in function need_add_header() 2013-05-08 18:13:58 -03:00
Gianluca Gennari
3726ff73ad dashdemux: fix extraction of SegmentTemplate->initialization in gst_mpd_client_get_next_header() 
now the following MPD files are properly supported:

http://dash.edgesuite.net/adobe/hdworld_dash/HDWorld-1600.mpd
http://dash.edgesuite.net/adobe/hdworld_dash/HDWorld.mpd
 2013-05-08 18:13:58 -03:00
Gianluca Gennari
cd84aaa9aa dashdemux: fix memory leak in gst_dash_demux_get_next_header() 2013-05-08 18:13:58 -03:00
David Corvoysier
95ee452625 We now only accept actual manifest files, and not any XML file 2013-05-08 18:13:58 -03:00
David Corvoysier
763f4c3fc3 Added a typefind helper for DASH: this commit should be reverted as soon as a proper patch has been submitted to gst-plugins-base 2013-05-08 18:13:57 -03:00
David Corvoysier
29c62f4780 Fixed state machine (again) 2013-05-08 18:13:57 -03:00
David Corvoysier
a7ad12e208 Code refactoring 2013-05-08 18:13:57 -03:00
David Corvoysier
f4756f7cb0 Fixed state machine 2013-05-08 18:13:57 -03:00
David Corvoysier
7f2207732b Improve consistency of the tasks shutdown code 2013-05-08 18:13:57 -03:00
David Corvoysier
28aaff747c Added missing g_list_free 2013-05-08 18:13:57 -03:00
David Corvoysier
30fece810f Do not answer to URI queries 2013-05-08 18:13:56 -03:00
David Corvoysier
0e2c3ffc0b Try queries upstream if we cannot process them 2013-05-08 18:13:56 -03:00
David Corvoysier
089daeba1b Renamed demux->next_stream in demux->next_push 2013-05-08 18:13:56 -03:00
David Corvoysier
943f4fa152 Inlined one-line utility funciton that was called only once 2013-05-08 18:13:56 -03:00
David Corvoysier
3cb7b12cbe Fixed regression after the introduction of the multi-screen support, preventing the pipeline from stopping properly 2013-05-08 18:13:56 -03:00
David Corvoysier
6f5d6f91ff Modified log level of shutdown message 2013-05-08 18:13:56 -03:00
David Corvoysier
90be873ee1 Comments: We don't select a single representation, but a representation for each stream Code: cleanup of gst_get_next_fragment (also renamed in gst_get_next_fragment_set) 2013-05-08 18:13:56 -03:00
David Corvoysier
d3c4c48923 Removed debug trace 2013-05-08 18:13:56 -03:00
David Corvoysier
6be9a30ad8 Added introduction and general design notes 2013-05-08 18:13:56 -03:00
David Corvoysier
35c04708ba Fixed wrong comment 2013-05-08 18:13:56 -03:00
David Corvoysier
6255b2762f Documented gst_dash_demux_download_loop 2013-05-08 18:13:55 -03:00
David Corvoysier
5b6bede189 Commented gst_dash_demux_stream_loop 2013-05-08 18:13:55 -03:00
David Corvoysier
b9d6796cb5 Commented needs_pad_switch 2013-05-08 18:13:55 -03:00
David Corvoysier
54fcbf89f1 Documented the representation switch mechanism 2013-05-08 18:13:55 -03:00
David Corvoysier
7764efb761 Replaced references to playlist (HLS) by references to manifest (DASH) 2013-05-08 18:13:55 -03:00
David Corvoysier
ad22e0da6d Renamed gst_dash_demux_switch_playlist to gst_dash_demux_select_representation and added comments 2013-05-08 18:13:55 -03:00
David Corvoysier
204ea9fc67 Removed obsolete comment 2013-05-08 18:13:55 -03:00
David Corvoysier
ae32818105 Applied gst-indent 2013-05-08 18:13:55 -03:00
David Corvoysier
28215b9e12 Updated README 2013-05-08 18:13:55 -03:00
Gianluca Gennari
b4057976be mpdparser: support MPD files with SegmentBase elements encoded inside a SegmentList element 
also properly support MPD files without any Initialization segment
 2013-05-08 18:13:55 -03:00
Gianluca Gennari
375634f669 mpdparser/dashdemux: fixed get_width, get_height, get_audio_rate, get_num_audio_channels API functions 
the actual values now can be extracted also from the AdaptationSet element;
checking NULL structs for better robustness;
 2013-05-08 18:13:55 -03:00
Gianluca Gennari
98a41f2c9e mpdparser: added support for single-segment streams with the URL encoded in the baseURL syntax element 2013-05-08 18:13:54 -03:00
Gianluca Gennari
779bf29879 mpdparser: added lang attribute to ProgramInformation node 2013-05-08 18:13:52 -03:00
Gianluca Gennari
94644fa82e mpdparser: added support for Accessibility, Role, Rating, Viewpoint elements to AdaptationSet node 
those are DescriptorType elements, so they are just parsed and dumped for now;
 2013-05-08 18:13:50 -03:00
Gianluca Gennari
416ea67979 mpdparser: support multiple ProgramInformation nodes 
now we keep a list of ProgramInformation nodes for each Period node
 2013-05-08 18:13:48 -03:00
Gianluca Gennari
dd198bc86d mpdparser: fixed parsing of SegmentList syntax element, and eliminated Represention node list from Period node 
SegmentList nodes are allowed into Period, AdaptationSet or Representation nodes
and there is at most 1 element, so no need to keep a list;

Period nodes cannot have any Represention elements, as AdaptationSet nodes are mandatory;
this breaks compatibility with some legacy DASH test sequences.
 2013-05-08 18:13:48 -03:00
Gianluca Gennari
8e3092661a mpdparser: fixed return with no value 
gstmpdparser.c: In function ‘gst_mpdparser_get_list_and_nb_of_audio_language’:
gstmpdparser.c:2891: warning: ‘return’ with no value, in function returning non-void
 2013-05-08 18:13:48 -03:00
Gianluca Gennari
7330bbfa7a mpdparser.c/.h: changed license from dual MIT/LGPL 2.0 to LGPL 2.1 
uniformed licencinsing to the other libraries in the dashdemux project
 2013-05-08 18:13:48 -03:00
hzakari
ec44485510 Optimize the two functions that return the number and the list of languages in a single function 2013-05-08 18:13:48 -03:00
Hamid ZAKARI
fab388c9fd Add the headers to the adaptationsets segments if any one of these changed representation 2013-05-08 18:13:46 -03:00
Hamid ZAKARI
713d02b81a Support Multi languages (need a decodebin2 patch) 2013-05-08 18:13:45 -03:00
Hamid ZAKARI
a4ac4a3117 Remove the "TODO" comment 2013-05-08 18:13:45 -03:00
David Corvoysier
3c937636ee Renamed LICENSE into COPYING 2013-05-08 18:13:44 -03:00
David Corvoysier
79dc12cc05 Updated authors 2013-05-08 18:13:44 -03:00
David Corvoysier
6fc0db0e0b Initial import of gstdashdemux sources 2013-05-08 18:13:43 -03:00
Tim-Philipp Müller
43fea50c8a smoothstreaming: pass width, height, channels and rate as integer 
g_ascii_strtoull() returns a long long integer, but we need to
pass a normal int to gst_structure_set() for fields of G_TYPE_INT,
so cast appropriately.
 2013-05-08 15:42:01 +01:00
Tim-Philipp Müller
99c1dce8db smoothstreaming: fix WMV caps 
Makes this show at least a picture:
http://playready.directtaps.net/smoothstreaming/TTLSS720VC1/To_The_Limit_720.ism/Manifest
 2013-05-08 10:55:16 +01:00
Thiago Santos
4711da22e9 mssdemux: fixing compiler warnings about print formats 2013-05-07 21:09:49 -03:00
Thiago Santos
4545f4bf4e smoothstreaming: port to 1.0 2013-05-07 21:09:49 -03:00
Thiago Santos
001da5a239 mssdemux: remove already fixed TODO comment 2013-05-07 21:09:49 -03:00
Thiago Santos
210f6c510c mssdemux: replace gst_value_deserialize with simpler function 
The deserialization was only used to convert hex strings into
GstBuffers. Replace gst_value_deserialize with a simpler, direct
function.
 2013-05-07 21:09:49 -03:00
Thiago Santos
1458500850 mssdemux: fix newsegment event leak 2013-05-07 21:09:48 -03:00
Thiago Santos
e541ec7e63 mssdemux: replace unused parameter 
The buffer parameter wasn't being used, it was only to signal if
a buffer was downloaded and advance to the next fragment in the
manifest.

Replace the buffer with a boolean that has the same effect and is
safer
 2013-05-07 21:09:48 -03:00
Wim Taymans
6d56eba653 mss: avoid GValue leak 2013-05-07 21:09:48 -03:00
Louis-Francis Ratté-Boulianne
f0b6b79461 mssdemux: fix a small memory leak 2013-05-07 21:09:48 -03:00
Louis-Francis Ratté-Boulianne
00400a838b mssdemux: avoid streaming to fail when download is cancelled 
When download was failing repeatedly, it was causing streaming to fail even though it was cancelled on purpose (stopping tasks).
 2013-05-07 21:09:48 -03:00
Thiago Santos
b579cb1ddc mssdemux: removing unused functions 2013-05-07 21:09:48 -03:00
Thiago Santos
1d28c574cf mssdemux: switch bitrates without switching pads 2013-05-07 21:09:48 -03:00
Andre Moreira Magalhaes (andrunko)
c8367a346c mssdemux: Check if pads are valid before removing. 2013-05-07 21:09:48 -03:00
Thiago Santos
bf0ea5d561 mssdemux: add a maximum error count for downloads 
mssdemux will tolerate a few download errors before emitting an
error message to the bus
 2013-05-07 21:09:48 -03:00
Thiago Santos
255eb4b161 mssdemux: use streams bitrate individually 
connection setup times seem to matter when measuring the download
rate of different streams. Streams with longer fragments have a
*relatively* lower connection setup time and achieve higher bitrates.

Using the average seems unfair here, so use each stream's measured bitrate
to select its best quality option.
 2013-05-07 21:09:48 -03:00
Thiago Santos
52c97834df mssdemux: use downloadbitrate utility for measuring bitrate 
downloadbitrate keeps a short history of bitrates and helps
tracking the current average download bitrate for mssdemux
 2013-05-07 21:09:48 -03:00
Andre Moreira Magalhaes (andrunko)
68308b3e54 mssdemux: Properly compute new bitrate and use bitrate_limit. 2013-05-07 21:09:48 -03:00
Andre Moreira Magalhaes (andrunko)
706b127daa mssdemux: Avoid a possible division by zero 2013-05-07 21:09:48 -03:00
Andre Moreira Magalhaes (andrunko)
28beb2ebd7 mssdemux: Add missing object param to GST_DEBUG|INFO_OBJECT calls 2013-05-07 21:09:48 -03:00
Thiago Santos
2219a3a1cc mssdemux: add bitrate-limit property 
It allows the plugin to use its own downloading bitrate measures
as a feedback to select the best streams bitrate for the current
network scenario
 2013-05-07 21:09:48 -03:00
Thiago Santos
a0a05b2941 mssdemux: use the shared uridownloader lib instead of an internal copy 2013-05-07 21:09:47 -03:00
Andre Moreira Magalhaes (andrunko)
12e9432847 mssdemux: Do not block on reset. 
We need to cancel the downloader for each stream before joining the main download task, otherwise
the download task will block until all the stream tasks finish.
 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
8ab3d09f81 mssdemux: handle FLUSH events by resetting the demuxer state 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
4a630f86f8 mssdemux: add conditions to prevent some crashes 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
218f2dee0c mssdemux: use standard glib methods 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
44d02efee0 mssdemux: fix some memory leaks and use right free function 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
b064910895 mssdemux: don't stop a task from inside the loop 
Only pause the task
 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
0239d77999 mssdemux: log manifest content for debugging 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
ea5f2718bf mssdemux: make codec private data from manifest attributes with AAC-LC 
When the codec is AAC-LC, some server implementation (e.g. Microsoft IIS) doesn't add the CodecPrivateData attribute. The element needs to re-create the codec data from the Quality Level attributes (channels and sampling rate).
 2013-05-07 21:09:47 -03:00
Louis-Francis Ratté-Boulianne
3ebb842388 mssdemux: only try to reload the manifest for live streams 
There is no way to know if a live stream is really finished, so try to reload the manifest and check if there are more fragments to download. Else just let know it's the EOS.
 2013-05-07 21:09:47 -03:00
Thiago Santos
7cb3a367f6 mssdemux: add some documentation 
Adds a little bit of docs explaning the internals of mssdemux
 2013-05-07 21:09:47 -03:00
Thiago Santos
46efc08809 mssdemux: add max-queue-size-buffers property 
Indicates how much buffering should be done internally in
mssdemux
 2013-05-07 21:09:47 -03:00
Thiago Santos
23ad760e3a mssdemux: stop tasks faster 
Issue a cancel to the downloaders so they stop earlier
 2013-05-07 21:09:47 -03:00
Thiago Santos
aa1713068a mssdemux: implement live streams handling 
Live streams force the demuxer to keep reloading the Manifest from
time to time, as the new fragments are being added as they are recorded.
The demuxer should also try to keep up and detect when it had to skip
fragments, marking the discont flag when that happens.

Curiously, the spec doesn't seem to mention when/how a live stream is supposed
to end, so keep trying downloads until the demuxer errors out.
 2013-05-07 21:05:12 -03:00
Thiago Santos
0704f15103 mssdemux: do not leak fragments 2013-05-07 21:05:12 -03:00
Thiago Santos
21872e78b8 mssdemux: fix issue on fragment timestamping parsing 
Use guint64 as the fragments can start at very high numbers,
specially on live streams
 2013-05-07 21:05:12 -03:00
Thiago Santos
0a4c077d2e mssdemux: error out when upstream doesn't implement URI query 
Error out when upstream doesn't answer to URI query and mssdemux
doesn't know the URI to fetch the fragments from
 2013-05-07 21:05:12 -03:00
Thiago Santos
1116eee681 mssdemux: push newsegments with same start time on bitrate switches 
This keeps sinks working in sync after a bitrate switch
 2013-05-07 21:05:12 -03:00
Thiago Santos
c2ae981e6d mssdemux: rewriting pad tasks so that buffers are pushed by ts order 
Use pad tasks to download data and an extra task that gets the earlier
buffer (with the smallest timestamp) and pushes on the corresponding
pad.

This prevents that the audio stream rushes ahead on buffers as its
fragments should be smaller
 2013-05-07 21:05:12 -03:00
Thiago Santos
fba63178fe mssdemux: some fixes to bitrate switching 
Removes a possible deadlock from bitrate switching when the pad
that requested the switch blocks on its pad-push
 2013-05-07 21:05:12 -03:00
Thiago Santos
6ca10e6c1b mssdemux: refactoring fragment download to its own function 
Makes code clearer and helps changing the download part of the
code to its own thread
 2013-05-07 21:05:11 -03:00
Thiago Santos
da4fad2f6f mssdemux: implement bitrate switching 
When connection-speed changes, signal that we might need a bitrate
switch. During the switch, a new pad group is added and the old one
is drained and removed.

New pads also need to push newsegments before starting to stream
 2013-05-07 21:05:11 -03:00
Thiago Santos
b9aec0ad0d mssdemux: add connection-speed property 
This speed limits the maximum bitrate of streams. Currently it
is only read when starting the pipeline, but it should be used
for switching bitrates during playback to adapt to network
changes.
 2013-05-07 21:05:11 -03:00
Thiago Santos
4b6900999a mssdemux: add an 'active' flag to manifest stream 
mssdemux should set the streams it has exposed as active so that
the manifest won't use the non-active streams to compute total bitrates
or providing fragments
 2013-05-07 21:05:11 -03:00
Thiago Santos
4726115e83 mssdemux: signal no-more-pads when finished exposing pads 
This makes decodebin/playbin mechanism know it can start playing
when buffering is finished
 2013-05-07 21:05:11 -03:00
Thiago Santos
eec8164d9c mssmanifest: Keep the stream qualities list sorted by bitrate 
This will help making adaptive streaming chose the best rate
for a particular connection speed
 2013-05-07 21:05:11 -03:00
Thiago Santos
013c11f7dd mssdemux: also consider fourcc AVC1 as H264 
H264 can be represented by both fourccs H264 and AVC1, use both.
 2013-05-07 21:05:11 -03:00
Thiago Santos
4293cfa763 mssmanifest: add support for VC-1 and WmaPro formats parsing 
VC-1 should map to WMV3 and WmaPro to WMA2
 2013-05-07 21:05:11 -03:00
Thiago Santos
3f2409f7e2 mssdemux: do not try to expose unknown streams 
When the stream can't have its caps detected, better not to expose it.
If no streams are known, signal an error about no playable streams to
the application
 2013-05-07 21:05:11 -03:00
Thiago Santos
b2ba96bb85 mssmanifest: do not set codec_data when it is empty 
Some manifests contain empty codec datas, better not set them
 2013-05-07 21:05:11 -03:00
Thiago Santos
9b3f67c5b0 mssdemux: set timestamp and duration to fragment buffers 
We can get those from the manifest and helps downstream to know
the fragment start time after a seeking operation
 2013-05-07 21:05:11 -03:00
Thiago Santos
ebd0862ac1 mssmanifest: fix typo 
Fix typo that was making the advance fragment function return a wrong
flow return in case it was already EOS
 2013-05-07 21:05:11 -03:00
Thiago Santos
cb7e3d1f3b mssdemux: initial implementation of seek event handling 
Adds basic handling for seek in time events. Needs to cooperate
with the downstream qtdemux so that it forwards the seeks and
the corresponding newsegments
 2013-05-07 21:05:11 -03:00
Thiago Santos
33d872916b mssdemux: handle src pad queries fir duration and latency 
Add a src pad query handler to get the duration from the manifest
and report it upstream.

Also adds a simple handler for latency queries
 2013-05-07 21:05:11 -03:00
Thiago Santos
0f1ef317f0 mssdemux: add some more error handling 
Post error in some more scenarios:
* when the manifest has no streams
* when getting the fragment url fails
 2013-05-07 21:05:11 -03:00
Thiago Santos
3f15c9b05a mssdemux: add timescale to the caps 
This is important for downstream to properly timestamp the samples

The default value is 10000000, but this can be set in the stream
or at the top-level manifest entry
 2013-05-07 21:05:10 -03:00
Thiago Santos
68d2719c9f mssdemux: parse the fps from h264 codec data if possible 
Use h264 codec parsing lib to extract the fps from the manifest's
codec data as it doesn't seem to provide it anywhere else
 2013-05-07 21:05:10 -03:00
Thiago Santos
af4c690995 mssdemux: correctly add h264 codec data to caps 
Need to construct an avcc atom from the codecdata read from MSS
manifests to make h264 decoders/parsers accept it
 2013-05-07 21:05:10 -03:00
Thiago Santos
edea61b758 mssdemux: add the correct caps to the outgoing stream 
mssdemux outputs a quicktime variant, named mss-fragment
 2013-05-07 21:05:10 -03:00
Thiago Santos
32d8a72bfc mssdemux: set caps to buffers before pushing 
Also update to the latest gstfragment API that provides
the fragment as a whole buffer.
 2013-05-07 21:05:10 -03:00
Thiago Santos
91dd173f3c mssdemux: improve state changing 
Keep a ref on pad to prevent it being unreffed while the mssdemux
streams are still using it. Also reset the element when going to
ready instead of when going to null.
 2013-05-07 21:05:10 -03:00
Thiago Santos
b4f994d47c mssdemux: adds mininum error handling 
This should care for basic scenarios of errors and EOS to allow
the pipeline to stop correctly
 2013-05-07 21:05:10 -03:00
Thiago Santos
96522f474c mssdemux: mssmanifest: prevent accessing null stream fragment 
Move the access to the stream fragment data after the check
if the fragment exists to prevent a segfault
 2013-05-07 21:05:10 -03:00
Thiago Santos
ca4e5c34cb smoothstreaming: refactor structure names and implement url fetching 
Use shorter names for the MSS manifest helper structure and functions.

Also continues the implementation of the stream fetching and pushing loop.
Now it uses the base url correctly and already fetches and pushes the fragments
downstream
 2013-05-07 21:05:10 -03:00
Thiago Santos
7ceb023682 mssdemux: initial implementation of the pad loop 
The loop will fetch a new fragment and push on its srcpad. Each
stream has its own loop
 2013-05-07 21:05:10 -03:00
Thiago Santos
6b63a7dc81 mssdemux: more manifest parsing and helper functions 
Now the mss manifest is able to generate the files urls
 2013-05-07 21:05:10 -03:00
Thiago Santos
5291985efe mssdemux: pad exposing initial implementation 
Does some basic parsing of the stream caps and adds a pad for
each stream detected in the manifest
 2013-05-07 21:05:10 -03:00
Thiago Santos
72b05c0051 mssdemux: add manifest parsing 
Continued implementing:
1) parse the manifest with libxml2
2) detect stream types
 2013-05-07 21:05:10 -03:00
Thiago Santos
95e87fbee9 smoothstreaming: stubs for mssdemux 
Just the stubs for mssdemux element.
Also add some useful code from hlsdemux that we intend to reuse
 2013-05-07 21:05:10 -03:00
Thiago Santos
ef25e05b7c smoothstreaming: build directory stubs for new plugin 
Initial build structure for MS' Smooth Streaming plugin

Conflicts:
	ext/Makefile.am
 2013-05-07 20:02:41 -03:00
Stefan Sauer
7aeed2d79d ladspa: sync controlled parames in filters and sinks 2013-05-03 21:46:53 +02:00
Sebastian Dröge
a845d6d0db ladspa: Add $(GMODULE_NO_EXPORT_LIBS) for gmodule 2013-05-03 16:55:00 +02:00
Juan Manuel Borges Caño
70e208d08e ladspa: improved port to gstreamer 1.0 
Fixes: #698927
 2013-05-03 12:36:44 +02:00
Tim-Philipp Müller
9056e775a9 kate: fix buffer leak in katetag 
Makes unit test valgrind clean.

https://bugzilla.gnome.org/show_bug.cgi?id=697071
 2013-04-27 12:28:58 +01:00
Tim-Philipp Müller
de3bd76051 kate: minor cleanup 2013-04-27 12:06:28 +01:00
Sebastian Dröge
9f25db0981 eglglessink: Use gst_egl_display_get() instead of passing a GstEGLDisplay to EGL functions 2013-04-24 09:40:24 +02:00
Tim-Philipp Müller
4b256e729e tests: fix remaining kate tests 
https://bugzilla.gnome.org/show_bug.cgi?id=697071
 2013-04-23 01:17:56 +01:00
Thiago Santos
b40c9ff39a eglglessink: eagl: fix eagl reuse by not releasing the context 
It seems EAGL expects the application to simply ignore unused
EAGL contexts as the resources for it would be released when a new
context is set as the current one. Also move the egl extensions
querying to after a context is set to prevent crashes.

This makes the EAGL version of eglglessink reusable.
 2013-04-19 08:45:02 +02:00
Sebastian Dröge
baa9754f6f eglglessink: Give only SECONDARY rank 
If available we still prefer xvimagesink.
 2013-04-18 15:27:11 +02:00
Josep Torra
87f2bae822 eglglessink: fixes 'makes integer from pointer without a cast' warning 2013-04-18 12:54:31 +02:00
Josep Torra
1190a79b19 eglglessink: silence warnings building for RPI related to 'vcos_*' 2013-04-18 12:53:28 +02:00
Josep Torra
9a88d737fc eglglessink: fix warnings building on the RPI 2013-04-18 12:35:55 +02:00
Sebastian Dröge
a8cca17027 eglglessink: Fix GstContext refcounting some more 2013-04-17 13:48:28 +02:00
Sebastian Dröge
f398742608 eglglessink: Fix GstContext refcounting 2013-04-17 13:16:27 +02:00
Sebastian Dröge
e8ad67f2b4 eglglessink: Update for GLTextureUploadMeta and EGL API changes 2013-04-17 10:51:18 +02:00
Sebastian Dröge
92e9988a40 eglglessink: Reorder surface queries 
Otherwise wrong values can be returned.
 2013-04-16 22:51:18 +02:00
Sebastian Dröge
118f8f33ef eglglessink: Properly set a debug category for the adaption layers 2013-04-16 22:25:19 +02:00
Sebastian Dröge
9fdec0f83b eglglessink: Get the EGL/GLES extensions at the right position 2013-04-16 22:25:02 +02:00
Sebastian Dröge
0fe6fbd677 eglglessink: Fix compiler warning 
gstegladaptation_egl.c: In function 'gst_egl_adaptation_create_native_window':
gstegladaptation_egl.c:868:3: error: format '%p' expects argument of type 'void *', but argument 8 has type 'EGLNativeWindowType' [-Werror=format=]
   GST_DEBUG_OBJECT (ctx->element, "Using window handle %p", window);
   ^
 2013-04-16 22:14:09 +02:00
Thiago Santos
149cb5a7cf eglglessink: refactor to allow eagl support 
Put EGL specific code to a separate file and create the same functions
for EAGL, the Apple's specific EGL implementaton.

At this point, the EAGL version wasn't compiled or tested as there isn't
any simple documented way to build 1.0 for iOS. This code for the EAGL
version is still the 0.10 version, some updates should be made when 1.0
is buildable for iOS.
 2013-04-16 16:04:35 -03:00
Thiago Santos
0fafdf8db1 eglglessink: refactor egl functions/data to a separate file 
This is part of the changes required to make
eglglessink work with both EGL and Apple's EAGL
 2013-04-16 15:58:12 -03:00
Sebastian Dröge
0f10fb622e eglglessink: Print EGL/GLES extensions after we are actually initialized enough 2013-04-16 16:30:08 +02:00
Sebastian Dröge
e51cd4fe2f gst: Add better support for static plugins 2013-04-15 15:59:22 +02:00
David Schleef
2b160f516a mpg123: Add conditional on API version for new enum 2013-04-15 00:25:16 -07:00
Sebastian Dröge
611ab7f744 eglglessink: Fix compiler warnings 
gsteglglessink.c: In function 'gst_eglglessink_fill_texture':
gsteglglessink.c:1815:3: error: format '%d' expects argument of type 'int', but argument 11 has type 'gsize' [-Werror=format]
gsteglglessink.c: In function 'gst_eglglessink_configure_caps':
gsteglglessink.c:2850:3: error: format '%p' expects argument of type 'void *', but argument 8 has type 'EGLNativeWindowType' [-Werror=format]
 2013-04-15 08:48:19 +02:00
Tim-Philipp Müller
1dd53d64e8 kate: only send decoder output caps once or when the format changes 
and not for every single buffer. And  also send a caps
event for spu output.

https://bugzilla.gnome.org/show_bug.cgi?id=697071
 2013-04-15 00:54:10 +01:00
Tim-Philipp Müller
a3ad6eaf2d kate: fix decoder output caps 
It's either pango-markup or utf8, never both at the same time.

https://bugzilla.gnome.org/show_bug.cgi?id=697071
 2013-04-15 00:54:00 +01:00
Tim-Philipp Müller
46f979a839 kate: mark header buffers as such 2013-04-15 00:54:00 +01:00
Tim-Philipp Müller
8da7230c88 kateenc: save current input format in setcaps 2013-04-15 00:54:00 +01:00
Tim-Philipp Müller
b8d4b6f3bd kate: fix printf format strings and disable tiger element 2013-04-15 00:54:00 +01:00
Brendan Long
b261bd516f kate: port Kate subtitles to 1.0 
https://bugzilla.gnome.org/show_bug.cgi?id=697071
 2013-04-15 00:53:48 +01:00
Olivier Crête
4a9c3d4f16 srtpdec: Don't stop on invalid buffer 2013-04-09 21:37:25 -04:00
Olivier Crête
3bf994eb3b srtpdec: Cleaner stream cleanup 2013-04-09 21:37:25 -04:00
Olivier Crête
4b89870a58 srtpdec: Don't crash on invalid cipher 2013-04-09 21:37:24 -04:00
Tim-Philipp Müller
5beefc66cd ext: printf format fixes in debug and error messages 2013-04-08 17:40:14 +01:00
Todd Agulnick
71743d13c4 handdetect: fix build on OS/X 
gsthanddetect.h:84: error: expected specifier-qualifier-list before 'uint'

https://bugzilla.gnome.org/show_bug.cgi?id=697305
 2013-04-05 09:41:26 +01:00
Edward Hervey
725f8dc1f7 rsvg: Bump minimum requirement to 2.36.0 
And handle header changes in 2.36.2
 2013-04-03 14:57:23 +02:00
David Schleef
94ed6caec4 rtmpsrc: Implement basesrc->unlock() 
This fixes ->NULL transition problems if librtmp is stuck in a
recv or send call that never returns.
 2013-04-01 19:53:01 -07:00
Sebastian Dröge
1acde42b6e eglglessink: Use the EGLImage and GstVideoGLTextureUploadMeta caps features 2013-04-01 10:22:07 +02:00
Edward Hervey
e6041b9974 rsvg: Don't include rsvg-cairo.h directly 
Including it directly is now deprecated
 2013-04-01 09:13:16 +02:00
Luciana Fujii Pontello
9097da30e8 rsvg: Port to 1.0 
Also port the decoder to the GstVideoDecoder
 2013-03-31 19:23:30 +02:00
Sebastian Dröge
95f819109f eglglessink: Use gst_element_get_context() wherever possible 2013-03-31 11:47:01 +02:00
Sebastian Dröge
ce9b6e5afb eglglessink: Implement GstContext handling 2013-03-29 16:38:34 +01:00
Sebastian Dröge
9e2af116f6 eglglessink: Use a separate texture for the custom textures 2013-03-29 16:11:56 +01:00
Sebastian Dröge
3233c6163a eglglessink: Add support for GstVideoGLTextureUploadMeta 2013-03-29 16:07:23 +01:00
Olivier Crête
c42ac5b450 srtp: Update example pipelines 2013-03-28 14:35:48 -04:00
Tim-Philipp Müller
a028a05054 sbc: port encoder to GstAudioEncoder 
https://bugzilla.gnome.org/show_bug.cgi?id=690582
 2013-03-27 22:40:56 +00:00
Tim-Philipp Müller
ca9daee444 sbc: port decoder to GstAudioDecoder 
https://bugzilla.gnome.org/show_bug.cgi?id=690582
 2013-03-27 22:40:56 +00:00
Tim-Philipp Müller
fecddde2c2 sbc: import sbc decoder/encoder from bluez and port to 1.0 
https://bugzilla.gnome.org/show_bug.cgi?id=690582
 2013-03-27 22:40:56 +00:00
Tim-Philipp Müller
89bbcdea39 Merge SBC decoder and encoder from bluez 
https://bugzilla.gnome.org/show_bug.cgi?id=690582
 2013-03-27 22:40:55 +00:00
Tim-Philipp Müller
50643d6192 sbc: remove parser in favour of new GstBaseParse-based sbcparse in -good 2013-03-27 22:21:30 +00:00
Wim Taymans
91f4b15490 sbc: sbcdec: make decoder more performant 
Use an adapter to accumulate input buffers.
Decode all input in one output buffer when possible to reduce the amount of push
operations.
 2013-03-27 22:21:17 +00:00
Wim Taymans
dcb57780ef sbc: sbcdec: skip the frame on decoding error 2013-03-27 22:21:17 +00:00
Wim Taymans
a559bb7060 sbc: sbcdec: set DISCONT on outgoing buffers. 2013-03-27 22:21:17 +00:00
Wim Taymans
beaeeafb4d sbc: sbcdec: handle DISCONT and timestamps 
Reset state on discont.
Interpollate timestamps.
 2013-03-27 22:21:17 +00:00
Arun Raghavan
32154c5ae6 sbc: audio: Make the sbcdec element copy buffer metadata 
Makes sure we don't lose timestamps, etc.
 2013-03-27 22:21:17 +00:00
Wim Taymans
7e65f96acb sbc: enc: sbc_get_frame_duration is in milliseconds 2013-03-27 22:21:17 +00:00
Wim Taymans
9581e704b6 sbc: dec: chain up to parent before downward state change 2013-03-27 22:21:17 +00:00
Arun Raghavan
c6f6cc736f sbc: audio: Fix a leak in sbcdec 2013-03-27 22:21:17 +00:00
Arun Raghavan
dace80cc41 sbc: audio: Initialise SBC data before use in sbcparse element 2013-03-27 22:21:17 +00:00
Anderson Lizardo
6979975963 sbc: Fix trivial coding style issues on pointer declarations and casting 
Avoid using C++ style pointer declarations like "char* ptr", as most
BlueZ code uses "char *ptr".
 2013-03-27 22:21:17 +00:00
Syam Sidhardhan
142a5fb637 sbc: audio: Fix newline before EOF 2013-03-27 22:21:17 +00:00
Lucas De Marchi
b31ee7bffc sbc: Fix common misspelled words 
Accounting of misspelled words, as detected by codespell:

acording      2
ancilliary    1
appropiate    1
atribute      1
cant          1
comming       2
gracefull     1
lenght        1
mispelled     1
occured       1
occurences    1
ocurred       3
prefered      1
presense      1
reponse       1
seperate      1
succesful     1
successully   1
sucessfull    1
sucessfully   1
 2013-03-27 22:21:17 +00:00
Marcel Holtmann
5514d457a1 sbc: audio: Remove workaround for compiler warnings 2013-03-27 22:21:17 +00:00
Marcel Holtmann
df140f7852 sbc: Add pragma based workaround for GStreamer warnings 2013-03-27 22:21:17 +00:00
Marcel Holtmann
1ddbdc3e7a sbc: Update copyright information 2013-03-27 22:21:16 +00:00
Luiz Augusto von Dentz
d4fd8f3ecd sbc: Remove unused variable. 2013-03-27 22:21:16 +00:00
Luiz Augusto von Dentz
c985a85cf2 sbc: Remove unused variable. 2013-03-27 22:21:16 +00:00
Marcel Holtmann
db16c0332c sbc: Fix signed/unsigned comparison issue within GStreamer plugin 2013-03-27 22:21:16 +00:00
Siarhei Siamashka
3f994a84bb sbc: Use native byte order for audio in GStreamer and ALSA plugins 
This fixes endianness inconsistency between default SBC
configuration and GStreamer/ALSA.
 2013-03-27 22:21:16 +00:00
Marcel Holtmann
a3bf74686a sbc: Update copyright information 2013-03-27 22:21:16 +00:00
Marcel Holtmann
54f6cd0218 sbc: First attempt in fixing compiler warnings (still needs cleanup) 2013-03-27 22:21:16 +00:00
Marcel Holtmann
57f6f2655d sbc: Assign variables after declarations 2013-03-27 22:21:16 +00:00
Johan Hedberg
7ae0c70682 sbc: More coding style fixes 2013-03-27 22:21:16 +00:00
Luiz Augusto von Dentz
266cfb11b4 sbc: Fix runtime warnings of gstreamer plugin. 2013-03-27 22:21:16 +00:00
Luiz Augusto von Dentz
834a9b193b sbc: Update gstreamer plugin to use new sbc API. 2013-03-27 22:21:16 +00:00
Luiz Augusto von Dentz
ccf5d9ea7e sbc: Make use of parameters selected in alsa plugin and fix auto selection. 2013-03-27 22:21:16 +00:00
Marcel Holtmann
5be53d24ab sbc: Update copyright information 2013-03-27 22:21:16 +00:00
Luiz Augusto von Dentz
937066575a sbc: Add bitpool property and others fixes for gstreamer plugin. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
10325f3604 sbc: Enable gstreamer plugin to use autoconnect flag. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
2a5e58f44f sbc: Fixes gstreamer caps and code cleanup. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
ad24bafb62 sbc: Fix gtreamer payloader sending fragmented frames. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
84dcb6bb34 sbc: Add mp3 support for gstreamer plugin. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
76c77b1c60 sbc: Make a2dpsink to act like a bin and split the payloader. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
6a34433dd8 sbc: Code cleanup. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
742f952688 sbc: Integrate new ipc API implementation. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
2a21d83ce0 sbc: Add sbc_reinit. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
946d564292 sbc: Fix bug in sbcenc when changing encoder parameters. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
97fcf537cd sbc: Make sbc codec to write directly in application buffers and so avoiding memcpys. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
6f87580cfa sbc: Fix sbc negotiation and improves buffer handling by using GstAdapter. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
5672836c61 sbc: Fix buffers timestamps in sbcenc. 2013-03-27 22:21:15 +00:00
Luiz Augusto von Dentz
a2152f6c12 sbc: Add bitpool capability. 2013-03-27 22:21:15 +00:00
Marcel Holtmann
f2441fe654 sbc: Some more coding style changes 2013-03-27 22:21:15 +00:00
Marcel Holtmann
d1062c97d1 sbc: Don't forget to include the config options 2013-03-27 22:21:15 +00:00
Marcel Holtmann
cd3e730aeb sbc: Fix coding style issues 2013-03-27 22:21:14 +00:00
Luiz Augusto von Dentz
8f8ccc0f12 sbc: Fix coding style issues. 2013-03-27 22:21:14 +00:00
Luiz Augusto von Dentz
01b0530663 sbc: Fixes sbcparser element. 2013-03-27 22:21:14 +00:00
Luiz Augusto von Dentz
f88c9d5555 sbc: Fixes for gstsbcenc. 2013-03-27 22:21:14 +00:00
Luiz Augusto von Dentz
c5668f1e45 sbc: Add gstsbcutil.c and gstsbcutil.h. 2013-03-27 22:21:14 +00:00
Marcel Holtmann
e590dc56dc sbc: Force LITTLE_ENDIAN instead of BYTE_ORDER for now 2013-03-27 22:21:14 +00:00
Marcel Holtmann
85874338ff sbc: Implement full parsing support 2013-03-27 22:21:14 +00:00
Marcel Holtmann
5488f2bf13 sbc: Add mode property to the encoder 2013-03-27 22:21:14 +00:00
Marcel Holtmann
fa031b3fe0 sbc: Implement full encoding support 2013-03-27 22:21:14 +00:00
Marcel Holtmann
1f88ce2dca sbc: Fix class variable naming 2013-03-27 22:21:14 +00:00
Marcel Holtmann
7a231ada07 sbc: Limit the supported output rates 2013-03-27 22:21:14 +00:00
Marcel Holtmann
36f952b627 sbc: Implement full decoding support 2013-03-27 22:21:14 +00:00
Marcel Holtmann
974757b2f7 sbc: Add SBC encoder and decoder skeletons for GStreamer 2013-03-27 22:21:14 +00:00
Olivier Crête
ed7f675966 srtp: Fix filter handling in caps negotiation to keep filter content 2013-03-25 13:48:56 -04:00
Wim Taymans
c2966fce30 fluidsynth: rename to fluiddec 
Rename the fluidsynth plugin to fluidsynthmidi and the decoder
to fluiddec to avoid conflicts with buzztard.
 2013-03-22 15:24:20 +01:00
Wim Taymans
2bd4712efd fluidsynth: fix debug of segment structure 2013-03-22 13:48:26 +01:00
Wim Taymans
f5230ab8ec fluidsynth: handle discont 2013-03-22 13:48:03 +01:00
Wim Taymans
87041064f8 fluidsynth: reset on flush and state change 2013-03-22 12:16:45 +01:00
Wim Taymans
d09a72029c fluidsynth: add properties 
Add properties.
Try to find a good default soundfont when not specified.
 2013-03-22 11:04:10 +01:00
Wim Taymans
30585c8f8e fluidsynth: log midi tick event 2013-03-22 08:54:54 +01:00
Wim Taymans
64498c576b fluidsynth: redirect logging to gst logging functions 2013-03-22 08:54:32 +01:00
Wim Taymans
a6e5a26be2 fluidsynth: improve debug 2013-03-21 18:17:40 +01:00
Wim Taymans
5256b6bf89 fluidsynth: produce more accurate timestamps 2013-03-21 17:05:36 +01:00
Wim Taymans
76080b78af fluidsynth: add more debug 2013-03-21 14:57:43 +01:00
Wim Taymans
73824e0ea7 fluidsynth: add fluidsynth midi renderer 
Add a fluidsynth element that converts midi events into raw
float samples.
 2013-03-21 07:21:41 +01:00
Tim-Philipp Müller
f479401fd3 Dist hls as well 2013-03-20 15:25:55 +00:00
Wim Taymans
66d0d86e78 wildmidi: fix event and query handler 
Call the default implementation for unknown events and queries.
Fix event leak.
 2013-03-19 13:54:00 +01:00
Alessandro Decina
d2d6798087 Make the hls plugin depend on gnutls and move to ext/hls/ 
gnutls is used to implement AES decryption
 2013-03-19 10:54:18 +01:00
Wim Taymans
4a44dc5ecf port wildmidi 
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=696041
 2013-03-19 10:15:05 +01:00
Jose Antonio Santos Cadenas
ea2332c466 srtp: fix compilation warning returning NULL in case of error 
https://bugzilla.gnome.org/show_bug.cgi?id=695897
 2013-03-15 11:04:39 +00:00
Jose Antonio Santos Cadenas
2347c4e711 srtp: use constant AES_128_ICM instead of AES_ICM that is not found 
https://bugzilla.gnome.org/show_bug.cgi?id=695897
 2013-03-15 11:04:29 +00:00
Sebastian Dröge
86363b4f39 eglglessink: Add support for different EGLImage orientations 2013-03-13 13:02:07 +01:00
Sebastian Dröge
d5f15cf3a2 eglglessink: Add RGBA to the caps again 2013-03-13 11:10:02 +01:00
Olivier Crête
4eb960d6c3 srtp: Add SRTP plugin based on libsrtp 
In large part the work of Gabriel Millaire
 2013-03-12 20:01:50 -04:00
Sebastian Dröge
71768daceb eglglessink: Make sure the buffer is released to the pool if it's the last used one 2013-03-12 19:36:12 +01:00