This allows to add pad templates and set metadata in class_init instead of
base_init. base_init is a concept that is not supported by almost all
languages and copying the templates/metadata for subclasses is the more
intuitive way of doing things.
Subclasses can override pad templates of parent classes by adding a new
template with the same now.
Also gst_element_class_add_pad_template() now takes ownership of the
pad template, which was assumed by all code before anyway.
Fixes bug #491501.
Based on patch by: Daniel Macks <dmacks@netspace.org>
Earlier versions of OSX don't support proper multiarch and
trying to use /usr/bin/arch -foo with those versions would
just break things.
https://bugzilla.gnome.org/show_bug.cgi?id=615357
1) We need to lock and get a strong ref to the parent, if still there.
2) If it has gone away, we need to handle that gracefully.
This is necessary in order to safely modify a running pipeline. Has been
observed when a streaming thread is doing a buffer_alloc() while an
application thread sends an event on a pad further downstream, and from
within a pad probe (holding STREAM_LOCK) carries out the pipeline plumbing
while the streaming thread has its buffer_alloc() in progress.
On OSX, GStreamer might be built as a 'fat/universal' binary containing
both 32-bit and 64-bit code. We must take care that gst-plugin-scanner
is executed with the same architecture as the GStreamer core, otherwise
bad things may happen and core/scanner will not be able to communicate
properly.
Should fix issues with (32-bit) firefox using a 32-bit GStreamer core
which then spawns a 'universal' gst-plugin-scanner binary which gets
run in 64-bit mode, causing 100% cpu usage / busy loops or just hanging
firefox until killed.
https://bugzilla.gnome.org/show_bug.cgi?id=615357
As GST_SCHEDULING reports when buffers pass through pads due to
gst_pad_push calls, they are a good way of tracking the progress of
buffers through pipelines. As such, adding output of the buffer pointers
to these messages allows tracking of specific buffers, easing debugging.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
Even if we currently do not have a duration yet, assume seekable if
it looks like we'll likely be able to determine it later on
(which coincides with needed information to perform seeking).
Fixes#641047.
Rather than a fixed default frame count, estimate frame count to aim for
an interval duration depending on fps if available, otherwise use old
fixed default.
Also add a format flag to signal baseparse that subclass/format can provide
(parsed) timestamp rather than an estimated one. In particular, such "strong"
timestamp then allows to e.g. determine duration.
Don't unref the event if it hasn't been handled, because the caller
assumes it is still valid and might reuse it.
I ran into this problem when transcoding an AVI (with mp3 inside)
to gpp.
https://bugzilla.gnome.org/show_bug.cgi?id=639555
That is, as such formats allow subclass to extract position from frame,
it is possible to extract duration (if not otherwise provided)
from (near) last frame, and a seek can fairly accurately target the required
position.
Fixes#631389.
Arrange for upstream as well as downstream flushing when seeking.
Also determine upstream size as well as seekability. Adjust some comments
to reality and employ debug statement in proper order.
This reverts commit b5a3d60363.
Reverting this for now, since no one really seems to remember why this
property exists or what it could possibly be good for. It seems to have
been in the original mp3parse since the beginning of time and was back-
ported from there.
Seekability, like duration, etc is unlikely to change (frequently), and
the default assumption covers most cases, so let subclass set when needed.
At the same time, allow subclass to indicate if it has seek-metadata (table)
available, and possibly have it provide an average bitrate.
This allows the child class to chain its event handler with
GstBaseParse, so that subclasses don't have to duplicate all the default
event handling logic.
https://bugzilla.gnome.org/show_bug.cgi?id=622276
We wait to parse a minimum number of frames (10, arbitrarily) before
emiting bitrate tags so that our early estimates are not wildly
inaccurate for streams that start with a silence. If the stream ends
before that, we just emit the tags anyway.
While it _would_ be nicer to be specify the threshold to start pushing
the tags in terms of duration, this would introduce more complexity than
this merits.
https://bugzilla.gnome.org/show_bug.cgi?id=614991
This makes baseparse keep a running average of the stream bitrate, as
well as the minimum and maximum bitrates. Subclasses can override a
vfunc to make sure that per-frame overhead from the container is not
accounted for in the bitrate calculation.
We take care not to override the bitrate, minimum-bitrate, and
maximum-bitrate tags if they have been posted upstream. We also
rate-limit the emission of bitrate so that it is only triggered by a
change of >10 kbps.
Perform sanity check on type of seek, and only perform one that is
appropriately supported. Adjust downstream newsegment event
to first buffer timestamp that is sent downstream.
In particular, consider DISCONT == !sync, and allow subclass to query
sync state, as it may want to perform additional checks depending
on whether sync was achieved earlier on.
Also arrange for subclass to query whether leftover data is being drained.
In particular, (optionally) provide baseparse with a notion of frames per second
(and therefore also frame duration) and have it track frame and byte counts.
This way, subclass can provide baseparse with fps and have it provide default
buffer time metadata and conversions, though subclass can still install
callbacks to handle such itself.
After all, stream is as-is, and there is little molding to downstream's
taste that can be done. If subclass can and wants to do so, it can
still override as such.
Also handle the case gracefully where the subclass decides to drop
the first buffers and has no caps set yet. It's still required to
have valid caps set when the first buffer should be passed downstream.
Sending the flush-start event forward before taking the stream lock actually
works, in contrast to deadlocking in downstream preroll_wait (hunk 1).
After that we get the chain function being stuck in a busy loop. This is fixed
by updating the minimum frame size inside the synchronization loop because the
subclass asks for more data in this way (hunk 2).
Finally, this leads to a very probable crash because the subclass can find a
valid frame with a size greater than the currently available data in the
adapter. This makes the subsequent gst_adapter_take_buffer call return NULL,
which is not expected (hunk 3).
Baseparse internaly breaks the semantics of a _chain function by calling it with
buffer==NULL. The reson I belived it was okay to remove it was that there is
also an unchecked access to buffer later in _chain. Actually that code is wrong,
as it most probably wants to set discont on the outgoing buffer.
This allows to only create the socketpair when it is really required instead
of always creating it and immediately destroying it again for child buses.
https://bugzilla.gnome.org/show_bug.cgi?id=647005
This is used by GstBin to create a child bus without
a socketpair because child buses will always work
synchronous. Otherwise too many sockets could be
created and the limit of file descriptors for the
process could be reached.
Fixes bug #646624.
if set->control_pending is set to 0 but we didn't not succed reading
the control socket, future calls to gst_poll_wait() will be awaiken
by the control socket which will not be released properly because
set->control_pending is already 0, causing an infinite loop.
This caused "re-declaration" problems.
./clutter-gst-video-sink.c: In function ‘clutter_gst_video_sink_init_interfaces’:
./clutter-gst-video-sink.c:231:1: warning: declaration of ‘ClutterGstVideoSink’ shadows a global declaration [-Wshadow]
./clutter-gst-video-sink.h:64:44: warning: shadowed declaration is here [-Wshadow]
https://bugzilla.gnome.org/show_bug.cgi?id=646531
Some applications are requesting the same pad name multiple times
and the behaviour is undefined and different from element to element
but we don't want to break applications that work just fine.
In 0.11 this check should be an assertion again, although elements
have to do manual checking if the pad already exists again because
it can't be done in a threadsafe way here.
Allow for automatic merging of memory block in the _map function and automatic
freeing of the temporary memory.
Remove some unneeded functions.
Add possibility to force writable spanned memory.
basesrc's default event handler returns TRUE regardless of whether the
event is handled or not. This fixes the handler to conform with the
expected behaviour (which is to only return TRUE when the event has
actually benn handled). gst_bin_do_latency_func() depended on this
(incorrect) behaviour, and is now modified as well.
(Remaining 1-liner change in gstbasesrc.c is to keep gst-indent happy)
Just like gst_caps_intersect, but adds a new parameter 'mode'
that allows selecting the intersection algorithm to use.
Currently we have GST_CAPS_INTERSECT_MODE_ZIG_ZAG (default) and
GST_CAPS_INTERSECT_MODE_FIRST.
API: gst_caps_intersect_full
API: GstCapsIntersectMode
API: GST_CAPS_INTERSECT_MODE_ZIG_ZAG
API: GST_CAPS_INTERSECT_MODE_FIRST
https://bugzilla.gnome.org/show_bug.cgi?id=617045
Adding a buffer to the end of a GstBufferList is supposed to be a fast
operation, but it was not since the iterator does not advance its
nextpointer when adding buffers and GList does not have a tail pointer.
Using a GQueue to store the buffers makes it easier to add buffers to
the end of the list and this operation will now be much more efficient.
Adding an entire GList of buffers using
gst_buffer_list_iterator_add_list() will however have to iterate over
the list being added to be able to update the tail pointer in the
GQueue.
GST_DISABLE_DEPRECATED should only affect visibility of declarations in headers,
not actually remove symbols. See GitDeveloperGuidelines and DeprecatingAPI
pages in wiki.
https://bugzilla.gnome.org/show_bug.cgi?id=402141
Add new functions to clarify how the caps are compared to the template caps of
the element factory. Improve the docs to point out the difference.
Deprecate: gst_element_factory_can_{src|sink}_caps
API: add gst_element_factory_can_{src|sink}_{any|all}_capps
https://bugzilla.gnome.org/show_bug.cgi?id=402141
Replace subbuffer and copy vmethods by a more generic transform function that
can then be parametrised by transform specific data. This should allow us to
implement make-writable and more future transform functions.
Check if structure has been created before appending it to the caps. Free the
caps in the case of an error to not conceal it be returning empty caps.
Fixes#642271
Keep a pointer to the bufferpool. Release the buffer to the pool when
finalizing. Make sure the pool sets itself as the pool member of buffers that it
sends out.
Move some methods around.
Make sure we check for config parsing errors.
Increment the outstanding buffers before calling acquire so that we can be sure
that set_active() doesn't free the pool from under us.
Add start/stop methods to allow for bulk allocation of buffers.
Free buffers only when all outstanding buffers returned.
Make things more threadsafe wrt flushing and starting/stopping by
keeping track of start and stop method calls.
Use a lock to protect concurrect execution of set_config and set_active.
Start freeing the buffers when flushing and all buffers are returned to the
pool.
Make a copy of the config to avoid crashing with concurrent access.
Keep track if the buffer is configured and block activation when not configured
yet.
Keep track of outstanding buffers and disallow configuration when not all
buffers are returned to the pool. We need to do this or else we might end up
with wrong buffers in the pool.
Add return value to set_active.
Small cleanups. Fix finalize.
Use a GstStructure to provide the pool with the right configuration. Also
provide some helper methods to configure such a structure.
don't pass the config in alloc_buffer, pool implementation will already have
parsed it during set_config.
Update defs
Make separate api for getting and adding metadata. This allows us to pass extra
parameters to the init functions when creating metadata, which is needed for
specific API implementations.
Add beginnings of memory metadata.
Add first implementation of arbitrary buffer metadata. We use a simple linked
linked of slice allocated metadata chunks. Future implementations could use
something more performant.
Add get, remove, iterate methods to handle the metadata.
Add function that (unlike the GLib equivalent) also accepts paths that
aren't absolute and will clean up relative markers such as ./ and ../
before forming a URI.
Fixes warnings with e.g. filesrc location=foo ! typefind caused by the
recent switch to g_filename_to_uri(), but also actually creates valid
URIs for the first time.
Windows code paths could need some more work, e.g. we don't clean up
the relative markers there for now (because path could have \ and /
as separators).
API: gst_filename_to_uri()
Add an owner private field where the owner of a buffer can store some extra
information. We can use this to implement most of the subclassing that happens
now. Later this will be removed and replaced by arbitrary buffer metadata.
This was required to add a new MEDIA4 buffer flag for indicating
progressive/mixed telecine video buffers. There is no space for
additional flags in GstBuffer, so steal one from GstMiniObject.
https://bugzilla.gnome.org/show_bug.cgi?id=642671
This commit changes the request pad behaviour for plugins and applications.
Reopens Bug #402562
The proper fix for that bug is to keep track of created request pads.
This reverts commit a5e44ffffa.
Use new GstPoll functionality to wakeup the mainloop.
Use an atomic queue on the writer side to post the messages.
The reader side it protected with the lock still because we don't want multiple
concurrent readers.
Add an atomic queue. The queue can be used from multiple threads simultaneously
and without taking any locks or doing any blocking operations. This makes it
highly scalable for things like the bus, bufferpools and object recycling.
We need to ensure we call gst_pad_check_link() with the two pads in the correct
order. The order depends on wheter we iterate src or sink pads.
Signed-off-by: Chen Rui <rui.chen@tieto.com>
Check the sinkpad for the flushing state before calling the chainfunction on the
pad. We do this by checking the cache (which is also cleared on the srcpad when
the sink is set to flushing).
Fixes#641928
Failing to do so in the Windows case (implicitly triggered otherwise)
would have a subsequent _wait return immediately leading to high CPU
usage timeout loops.
Fixes#640675.
Make adding/removing gst_debug_log_default() work reliably in all
circumstances. The problem was that depending on platform and linker
flags the function argument might resolve to different addresses,
which made it impossible to remove the default log function added
in gst_init() from application code (because the pointer values
didn't match). The new approach should keep things simple by passing
NULL for the default function, which the code in libgstreamer can
then handle.
https://bugzilla.gnome.org/show_bug.cgi?id=625396https://bugzilla.gnome.org/show_bug.cgi?id=640771
Makes gst_bus_add_watch(), gst_bus_add_watch_full(), gst_bus_add_signal_watch(),
and gst_bus_add_signal_watch_full() convenience functions automatically pick up
any non-default main contexts set for the current thread via
g_main_thread_push_thread_default().
gstelement.c: In function ‘gst_element_get_request_pad’:
gstelement.c:1052:18: error: variable ‘tmp’ set but not used [-Werror=unused-but-set-variable]
https://bugzilla.gnome.org/show_bug.cgi?id=640850
The description string was changed to an inlined string a while back.
(But: no need to intern the const strings here, we just use the interning
to avoid allocating duplicates and make memory management easier,
since the strings will be around for the life-time of the app anyway).
https://bugzilla.gnome.org/show_bug.cgi?id=640071
Only replace existing plugins by blacklisted ones if they correspond
to the exact same plugin. If they're not the same, keep the existing
valid one.
Fixes#638941
Ignore plugins which have been moved into coreelements, so it's
still possible to just upgrade GStreamer core without having to
upgrade the whole stack.
This reverts commit f9039c2204.
We use -DG_DISABLE_ASSERTS for releases and pre-releases, but
don't want to disable pad name checking for releases in general,
I think. Need a better solution here. Fixes pad unit test in
pre-release/release mode.
Avoid unnecessary malloc/free to get the file basename on MSVC to avoid
unnecessary overhead when doing GST_DEBUG=foo:5 or so (since it would be
done before the category log level filtering).
The new request_new_pad_full vmethod provides an additional caps field,
which allows elements to take better decision process.
Also, add a gst_element_request_pad() function to allow developers to be
able to specify which pad template they want a pad of.
Convert gstutils to use that new method instead of the old one when more
efficient.
This is useful for being able to request pads in a more flexible way,
especially when the element can provide pads whose caps depend on
runtime configuration and therefore can't provide pre-registered
pad templates.
API: GstElement::request_new_pad_full
API: gst_element_request_pad
https://bugzilla.gnome.org/show_bug.cgi?id=637300
We need to reset the revents field of each pollfd when reading the results
from select else we'll end up with stray info from previous calls to
select.
Fix freeing of partially-inited list value when both values
passed are equal and we want to return a single non-list
value as result. Fixes unit test. Also fix up docs a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=637776
The -Bsymbolic change causes us to get a different address when internaly
looking up the function than what application would get when the use the symbol
that they see. This made removing the default loghandler to fail, as it is set
internally and removed externaly.
Make the _get_caps functions behave like the _get_caps_reffed variants and
remove the _reffed variants. This means that _get_caps doesn't return a writable
caps anymore and an explicit _make_writable() is needed before modifying the
caps.
Make GstObject extend from GInitiallyUnowned, remove the FLOATING flag and use
GObject methods for managing the floating ref.
Remove class lock, it was a workaround for a glib < 2.8 bug.
Remove the parent-set and parent-unset signals, attempt to implement with notify
but disabled because deadlocks in deep-notify.
All functions in this file can access the structure field of a query directly.
This avoids having to call gst_query_get_structure() to get it, along with being
able to remove some function variables that were used to store the result of that
function.
All functions in this file can access the structure field of an event directly.
This avoids having to call gst_query_get_structure() to get it, along with being
able to remove some function variables that were used to store the result of that
function.
There is no need to cache the peer chainfunction as we can just as efficiently
get to it from the peer object. Also not caching the chain function works better
because then we automatically get the new chainfunctions when they change.
Build the cache while we push data. When we don't have a cache, we run the
slowpath and collect cacheable properties. When all conditions are met, keep the
cached data around so that we can more efficiently push data around.
Fix returning of timezones on systems with gdatetime
to use floats on the math expression to avoid
truncating the fractional part.
Also adds a test for covering this case.
Otherwise the source will stay at NULL, the event is passed to the
peerpad via gst_pad_send_event() and then the peerpad is set as
source of the event instead of the originating pad.
This change always defines the restrict keyword if a
non-C99 C compiler is used. In the case of GCC >= 4
it will be defined to __restrict__, in all other
cases to nothing. This allows to use the restrict
keyword unconditionally.
Adds 2 variants for the gst_date_time_from_unix_epoch function,
one for UTC and another for local time.
API: gst_date_time_new_from_unix_epoch_utc
API: gst_date_time_new_from_unix_epoch_local_time
Fixes#653031https://bugzilla.gnome.org/show_bug.cgi?id=635031
Basically we're not meant to put anything more complex than simple numbers,
due to the definition of G_GUINT64_CONSTANT:
G_GUINT64_CONSTANT(val) (val##UL)
Which previously resulted in .... 1 << 49UL
gst_mini_object_unref() has guards that check the type already, so
we don't really need to re-check it here again while getting the
class (there's not really much point to that anyway, since we don't
check the return value of the get_class, so we'd crash anyway if
we're not dealing with a mini object, the only question would
be if there'd be a warning before the crash or not).
Track elements tagged with the IS_SOURCE flag in a similar way we track the sink
elements. This allows us to efficiently dispatch downstream events to the right
elements.
Add minimal math-compath.h header where we can define fallback
versions for miscellaneous math functions that aren't always
available, so we don't have to duplicate this in plugins.
The header is not included by default, so needs to be
included explicitly for now.
https://bugzilla.gnome.org/show_bug.cgi?id=630802
Adds a new tag to indicate the error in horizontal positioning
in meters. This is one of the available 'gps error' fields in
exif, for example.
API: GST_TAG_GEO_LOCATION_HORIZONTAL_ERROR
Add gst_is_initialized() guard to gst_element_factory_make(), so
people who forgot to call gst_init() get a useful warning for what
seems to be a common enough mistake.
Sprinkle some G_UNLIKELY(), return TRUE/FALSE constants, avoid an
unnecessary g_value_unset(), move g_value_init()+set_int64_range()
closer to where they're needed.
Don't create a new GValueArray copy for every single _add_buffering_range()
call, but append to the existing value array owned by the structure instead.
Add _set_value() variants that take ownership of the value passed
instead of making a copy of the value. This is useful for setting
values to things that aren't refcounted (e.g. GValueArrays or
strings or string arrays, etc.).
API: gst_structure_take_value()
API: gst_structure_id_take_value()
https://bugzilla.gnome.org/show_bug.cgi?id=629831
Add an option to forward all the internal messages that would otherwise be
filtered such as EOS, SEGMENT and ASYNC messages.
This allows the application to, for example, detect that a partial pipeline is
prerolled or reached eos.
The original messages are wrapped inside an element message because the parent
bins are not supposed to see those internal messages escape.
A flush-stop event would make a pad unflushing, causing it
to start acting as an activated pad. This, for example,
could lead to the chain function being called when stuff
isn't initialized.
This could happend when setting qtdemux to NULL while a seek
was being handled in the upstream filesrc (in push mode).
This patch makes it check if it is activated before setting
it to unflushing.
There's no need to create these tables with duplicates of the
untranslated error message string constants, we can just use
old-fashioned switch/case and call gettext directly. This also
makes things slightly more thread safe and more robust to bad
input (invalid error codes).
Add a GstStructure to GstElementClass and GstElementFactory. Add setters/getter.
Handle it in the registry code. Print items in gst-inspect.
Fixes#396774.
API: gst_element_class_set_meta_data(), gst_element_factory_get_meta_data_detail()
Added a new query type to retrieve informations about the areas of the
media currently buffered. See bug 623121.
API: gst_query_add_buffering_range
API: gst_query_get_n_buffering_ranges
API: gst_query_parse_nth_buffering_range
Make code including GStreamer headers compile with -Wcast-qual by
maintaining const-ness when casting. Also fix function signature of
gst_byte_writer_set_pos(): the byte writer should not be marked as
const.
https://bugzilla.gnome.org/show_bug.cgi?id=627910
And use it for the fraction comparisons in gstvalue.c instead
of using comparisons by first converting the fractions to double.
Should fix bug #628174.
API: gst_util_fraction_compare()
The problem with both macros is, that they suggest something that isn't true.
If GST_FLOW_IS_FATAL is true, there could still be a problem for many elements
and they should stop what they're currently doing and return that value
upstream (e.g. not-linked in a parser). If GST_FLOW_IS_SUCCESS is false, it
could still be that this is "ok" for the element (e.g. not-linked for a demuxer
on a few of its pads but not all).
It's better to not have these "convenience" macros but instead let people
*think* about the handling of different flow returns, that makes sense for
their element. And we should document the expected handling of flow returns for
different classes of elements in the plugin writer's guide.
Fixes bug #628014.
Adds GST_TAG_APPLICATION_DATA for representing arbitrary private
data that applications might want to store into tags. Exif/id3,
for example, have tags for this.
API: GST_TAG_APPLICATION_DATA
Fixes#626651
When there is a sink inside a bin, the SINK flag is set on the bin. When we are
trying to iterate the source elements, also include the bins with the SINK flag
because they could also contain source elements, in which case they are also a
source.
This solves the case where sending an EOS to a pipeline didn't get dispatched to
all source elements.
See #625597
gst_element_link_many does some magic and creates ghostpads
if needed, but it didn't set the newly created ghostpad to
active if needed. This patch fixes it.
https://bugzilla.gnome.org/show_bug.cgi?id=626784
This is not really necessary here because everything is
initialized from gst_init() already but using G_DEFINE_TYPE()
removes some copy&paste boilerplate code.
In gst_element_get_compatible_pad(), when trying to find a compatible pad on an
element for a given pad, there's no point in checking the element's sink pads
if the pad to link is a sink pad as well, or the element's source pads if the
given pad is a source pad already, since those would never be able to link
anyway. Should speed up linking using the convenience functions a little bit,
or at least reduce debug log output.
The logging is not an atomic operation and because of the multi-threading we end
up with out-of-order log lines. Tools that present the log-file should probably
resort the lines. This change just takes the timestamp a bit closer to the
actual logging.
gst_pad_proxy_getcaps() would return the pad template caps if the other side
returned empty caps or if the intersection of all the caps on the other side
was empty.
https://bugzilla.gnome.org/show_bug.cgi?id=624203
g_printerr() used to do this for us. Also use libc's fprintf() functions,
to make sure the stderr pointer we use is actually compatible with the
libc linked against by GStreamer (which apparently may not always be the
same as what GLib is linked against on windows), and we don't need the
functionality ensured by g_fprintf().
Fixes#625295.
This is a string describing a date and/or date/time in a simple subset of
the ISO-8601 format, namely either "YYYY-MM-DD" or "YYYY-MM-DDTHH:MMZ" (with
'T' the date/time separator and the 'Z' indicating UTC).
The main purpose of this field is to keep track of plugin and element versions
on an absolute timeline, so it's possible to determine which one is newer when
comparing two date time numbers. This will allow us to express 'replaces'-type
relationships betweeen plugins and element factories in future, even across
different modules and plugin merges or splits (source module version numbers
aren't particularly useful here, since they can only meaningfully be compared
within the same module). It also allows applications and libraries to reliably
check that a plugin is recent enough without making assumptions about modules
or module versions.
We use a string here to keep things simple and clear, esp. on the build system
side of things.
https://bugzilla.gnome.org/show_bug.cgi?id=623040
This changes behaviour slightly in that we no longer output things
via g_printerr(), so any non-standard glib printerr handlers are no
longer called when GST_DEBUG is enabled. However, this seems not
really desirable in most cases anyway, and the GLib docs also say
that libraries should not use g_printerr() for logging.
Other stderr output (e.g. warnings, or application messages) will
of course not be captured in the log file this way.
GST_DEBUG_FILE=- will redirect debug output to stdout.
This is the same behaviour as if we had a pad template caps of
GST_CAPS_ANY on any of the pads (i.e. the actual check will be done
during caps negotiation).
Instead just check that the caps intersect with the pad template.
The elements should properly accept/refuse the caps in setcaps().
Shaves off calling the default implementation of acceptcaps which does
an expensive gst_pad_get_caps() (so if you have 50 of those elements in
a row, you'd be doing factorial(50) gst_pad_get_caps...).
Does not break any module unit test and most apps work fine.
https://bugzilla.gnome.org/show_bug.cgi?id=622740
Make sure clock->clockid is unreffed before clock->master.
gst_clock_id_unschedule (clock->clockid) tries to access clock->master. If
clock->master is unreffed before and it's deallocated, _unschedule could access
free'd memory.
They are actually *not* const functions because on architectures
without int128 instructions the parameters were changed.
gcc re-used the parameters on the stack for multiple calls though
and the changed parameters were used for the second call then.
Fixes bug #623003.
Add a minimal gst_xml_get_type() function, so that gobject-introspection doesn't
break the compilation if we're compiling with GST_REMOVE_DEPRECATED defined or
--disable-loadsave having been passed to configure. Until someone figures out
a better way at least.
Since everything GstXML related has been deprecated, we can now skip the
libxml includes from the public headers when GST_DISABLE_DEPRECATED is
defined.
See #463435.
Pipeline serialisation to and from XML is horribly broken for all
but the most simple use cases, and will likely never be fixed.
Make sure everyone playing around with these tools is aware of
this, to avoid frustration. See countless bug reports in bugzilla.
Fixes bug #622685.
This feature is primarily intended for use in plugin modules' unit tests.
Consider the following situation: gst-plugins-good is built against an
installed GStreamer core. An older version of gst-plugins-good is also
installed in that prefix, along with random other plugin modules. Now,
when doing 'make check' in the just-built gst-plugins-good tree, we
want to only load plugins from GStreamer core, gst-plugins-base, and
gst-plugins-good, but not random other modules (we don't want any unit
tests to fail just because some module in gst-plugins-bad has a broken
plugin_init, for example). Also, we want to only load gst-plugins-good
modules from the locally-built source tree, but not any of the older
gst-plugins-good modules installed. This is usually assured by loading
the ones in the source tree first (by adding that path first to the
right environment variables), but it gets tricky when plugins are
moved, removed, merged, or renamed, or the plugin filename changes.
Note that 'make check' should really work right without doing
'make install' or uninstalling the old gst-plugins-good package (or
any other gst-plugins-foo package) first.
Enter GST_PLUGIN_LOADING_WHITELIST. This environment variable may
contain source-package@path-prefix pairs separated by the platform
search path separator (G_SEARCHPATH_SEPARATOR_S). The source package
and path prefix are separated by the '@' character. The path prefix is
entirely optional, as is the '@' separator if no path is given.
It is also possible to filter based on plugin names instead of the name
of the source-package by specifying one or more plugin names separated
by commas before the optional path prefix.
In short, the following match patterns are possible:
plugin1,plugin2@pathprefix or
plugin1,plugin2@* or just
plugin1,plugin2 or
source-package@pathprefix or
source-package@* or just
source-package
So for our gst-plugins-good unit test example above, we would set the
environment variable on *nix to something like this (will likely be a
relative path in practice):
gstreamer:gst-plugins-base:gst-plugins-good@/path/to/src/gst-plugins-good
Fixes#619815 and #619717.
Adds a new tag to inform about the image orientation and how
to rotate and flip it before display.
Note that this tag is a string with a predefined set of
possible values.
API: GST_TAG_IMAGE_ORIENTATION
Fixes#619508
Forgot those when adding the original API, just like the API markers
in the commit message:
API: GST_TRACE
API: GST_TRACE_OBJECT
API: GST_CAT_TRACE
API: GST_CAT_TRACE_OBJECT
API: GST_LEVEL_TRACE
Fixes compilation with --disable-gst-debug
A pad is 'negotiable' when its container element is in a state greater
than GST_STATE_READY
API:gst_pad_is_negotiable
API:gst_pad_set_negotiable
API:GST_PAD_NEGOTIABLE
https://bugzilla.gnome.org/show_bug.cgi?id=618644
This allows removing structures from caps without them being freed. Helpful when
plugins need to move around structures without having to do an expensive structure
copy.
API:gst_caps_steal_structure
https://bugzilla.gnome.org/show_bug.cgi?id=621527
The compare function should only unref the element if it's
not the matching element.
Also the FIXME in _fold() is not relevant because the ref/unref
happens in the fold function.
This makes it possible to easily get a *:5 debug log without all
the refcounting noise, and drastically reduces the number of lines
output for a normal log (46m to 28m for a 20min video). The full log
including refcounting information can still be gotten using *:7.
Fixes#620460.
Just truncate and then fixate. We check for empty caps in the begin and a
fixate-func that empties a caps would be broken. It also helps lazy caps impl.
in bug 618853 by avoiding the gst_caps_get_size().
When an error message is received on the bus, mark the bin as being in the error
state and unlock all current _get_state() calls with an error.
Fixes#505770
So we don't crash when a muxer tries to add tags from two
threads at the same time, eg. because it received tag events
on two input pads simultaneously.
See #619533.
We need to check the pad caps on the srcpad as well as on the sinkpad. Revert
this commit as it removes the check on the srcpad and can leave the srcpad
unnegotiated (or negotiated with wrong caps)
This reverts commit 07dc1e5b49.
Adds 3 new geo location tags involving direction and
movement of capture. Those are:
API: GST_TAG_GEO_LOCATION_CAPTURE_DIRECTION
API: GST_TAG_GEO_LOCATION_MOVEMENT_DIRECTION
API: GST_TAG_GEO_LOCATION_MOVEMENT_SPEED
Fixes#617223
Adds those new tags to describe the device manufacturer and
model used to create medias.
API: GST_TAG_DEVICE_MANUFACTURER
API: GST_TAG_DEVICE_MODEL
Fixes#615941
Make sure we execute the same code path in git versions and in releases,
so just warn when metadata isn't writable when we want it to be instead
of bailing out.
People often call
gst_caps_make_writable (caps);
instead of
caps = gst_caps_make_writable (caps);
and cause a bug. Warning about an unused return value helps here.
See https://bugzilla.gnome.org/show_bug.cgi?id=616541#c2 for an example.
This way people can just #define their own custom flow returns to
one of these without having the compiler (esp. gcc-4.5) complain
about comparing integers to an enum or the enum not being listed
Fixes#615880.
API: GST_FLOW_CUSTOM_SUCCESS_1
API: GST_FLOW_CUSTOM_SUCCESS_2
API: GST_FLOW_CUSTOM_ERROR_1
API: GST_FLOW_CUSTOM_ERROR_2
When an element is removed from a bin because it caused a state change error,
don't unref the child twice.
Add some more debug info.
Add a unit test for this error.
Fixes#615756
Fix 'grammar.tab.c:815:6: warning: "YYENABLE_NLS" is not defined'
compiler warning and the same for YYLTYPE_IS_TRIVIAL. The two
translated strings aren't particularly helpful, so just define
YYENABLE_NLS to 0.
Point g-ir-scanner to the .la file of our library, which hopefully
makes it find the right dependencies in all cases (ie. our locally
built libgstreamer and not the system-installed one). This is also
how it's done in Gtk+ and how it's documented in the wiki, see
http://live.gnome.org/GObjectIntrospection/AutotoolsIntegration
Based on patches by Vincent Untz and Alan Knowles.
Fixes#603710.
Adds a new tag for user favorite media rating.
User rating informs how much (from 0 to 100) a user
'likes' a media.
Having an percent uint range for this is easy to map into other scales,
like some players that allow users to attribute 'stars' to its
media.
API: GST_TAG_USER_RATING
Fixes#520697
Use gst_element_class_set_details_simple() instead. If you want to
convert automatically, here's a script:
for file in `git grep -l GstElementDetails`; do
sed -i -n -r '
1h
1!H
$ {
g
s/((\/\*[^\n]*\*\/)?\n)*[^\n]*GstElementDetails .* =\s*GST_ELEMENT_DETAILS\s*\((\"[^\"]*\",\s*\"[^\"]*\",\s*\"[^\"]*\",\s*(\"[^\"]*\"\s*)*)\);\n*(.*)gst_element_class_set_details \(([^,]*),\s*[^)]*\)/\n\n\5gst_element_class_set_details_simple (\6, \3)/
s/((\/\*[^\n]*\*\/)?\n)*[^\n]*GstElementDetails .* =\s*\{\s*(\"[^\"]*\",\s*\"[^\"]*\",\s*\"[^\"]*\",\s*(\"[^\"]*\"\s*)*)\};\n*(.*)gst_element_class_set_details \(([^,]*),\s*[^)]*\)/\n\n\5gst_element_class_set_details_simple (\6, \3)/
p
}' $file
~/gst/gstreamer/tools/gst-indent $file
done
Right now deleyed set would only try for first set of children. We need to keep
trying to support arbitrary deep hierarchies (like in playbin2 with auto*sinks).
Also GstBin would need to actualy emit the child-added/removed signal as it
implements the iface. Fixes#613215.
prctl is supposed to take 5 arguments. It used to work with 2 arguments on some
versions of libc because it is defined as a varags function there.
See #611911
This either must never happen (which makes sense in this case) and thus should
use assert() or we should use a traditional if (poll_data->message) return;
to avoid differnet behaviour of intenal api when compiling with
G_DISABLE_CHECKS.
This avoids creating empty caps and destroying them in the case of an error. We
also avoid double checking in other code path where we call the internal api.
See 8fe63000de for why having a TRUE/FALSE
return value is a bad idea.
I've scanned a few plugins and they generally get it wrong and aren't
unloadable when they return FALSE.
This is what can happen in a plugin_init function:
- An element based on GstBaseSink is registered
- Other elements fail to register
- The plugin_init function returns FALSE
Now if this the plugin is the first plugin to link against
libgstbase.so, it will have caused libgstbase.so to be loaded and static
strings from that library will have been added to gobject while
registering GstBaseSink.
So unloading the plugin will cause those strings to go stale and the
next plugin using GstBaseSink will crash. So we must not unload modules
after calling into them ever.
https://bugzilla.redhat.com/show_bug.cgi?id=572800
This brings total call speedups between 5% and 25%.
gst_caps_set_simple_valist: +5%
gst_structure_set_valist: + 10%
gst_structure_id_set_valist: +25%
gst_tag_list_add_valist: +5%
Measured using valgrind when run over the discovery of 200 media files.
Fixes#610256
The alignment guaranteed by malloc is not always sufficient. E.g. vector
instructions or hardware subsystems want specifically aligned buffers. The
attached patch will use posix_memalign if available to allocate buffers.
The desired alignment can be set when running configure using the new
--with-buffer-alignment option.
This changes some APIs in compatible ways:
- Some functions now take "const char *" arguments, not "char *"
- Some structs now have "conts char *" members, not "char *"
The changes may cause warnings when compiling with the right warning
flags. You've been warned.
Also adds -Wwrite-strings as a warning flag in configure.ac.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
Adds that warning to configure.ac
Includes a tiny change of the GST_BOILERPLATE_FULL() macro:
The get_type() function is no longer declared before being defined.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
Previous code treated "1/1yourmom" the same as "1/1" and "1wimsmom" the
same as "1". Now the code is stricter and will fail to convert a
fraction when followed by garbage text.
This may cause crashes when logging is enabled, especially on windows.
It's not safe to pass random pointers to g_type_check_instance_is_a().
Fixes#611719.
Add check to make sure gst-plugin-scanner really gets installed where
we will look for it later, ie. paths and prefixes are set at configure
time and not specified via make.
Fixes#609941.
Late g_thread_init() is fine with newer GLib versions and done automatically
from g_type_init() there, so don't warn if the application hasn't called
g_thread_init() yet when gst_init() is called with new GLib versions.
Fixes#608398.
Refactor the code to take the current start_time when going to PAUSED.
Make sure we also call the start_time update code after we chained up to the
parent bin.
Fixes#607842
If the GST_PLUGIN_SCANNER environment variable is set, we should try
the scanner specified there first, to make sure the right scanner binary
is used for uninstalled setups and builds from source when there's
already an installed version.
We require threads to be supported in any case and defining this
will simplify the mutex, condition variable, etc. macros from gthread
to not always check if threads are really supported.
Fixes bug #607481.
For the reason outlined at the beginning of gst_private.h (inline
functions in glib may need the g_log_domain variable). Also include
gst_private.h before using any G_OS_* defines, esp. in plugin loader.
This check is not necesarry as we are not negotiating anymore. And it can
be wrong if upstream can't produce this caps anymore, but downstream can
process them fine.
All callers of this static function already check for NULL-ness
themselves, so no need to do it again (and if we do it, we should
probably do so before dereferencing the pointer for the first time).
Avoid checking the GType of the value twice (once on our side and
once in g_value_get_*()) by by-passing g_value_get() and accessing
the GValue structure directly.
Strings in the binary registry are NUL-terminated, so we can just use them
directly if we only need them temporarily, and avoid unnecessary mallocs
and frees.
No need to call gst_element_link_pads_filtered with filter=NULL, which would
call gst_element_link_pads() in that way. Call it directly to save a call and
expensive gobject type checks.
Fix up translated strings for some recently-added tags to match the
existing strings: we want short mnemonic-like strings here that start
with a lower case letter.
The only reason these two functions are still around is that at some
point in the past they were in a public header, so we can't really
remove them now even though they should have been private all along
(and aren't really particularly useful). Since these are just empty
stubs now that do nothing but return FALSE and will be removed in
0.11 anyway, we may just as well deprecate them formally.
Move the parent buffer pointer into the GstBuffer struct so that we can
remove the subbuffer class and type. This is interesting because it allows us to
more naturally implement methods to get the real type and parent
of a subbuffer (See #545501).
It should also be slightly faster because there is no extra object hierarchy to
initialize and free.
When we unblock a pad with the same user_data, the destroy callback is not
called. This leads to refcounting leaks that cannot be avoided. Instead always
call the destroy notify whenever we install a new pad block.
In particular, this fixes a nasty pad leak in decodebin2.
Also update the unit test to have more accurate comments and test the required
behaviour.
Adds the following new tags:
GST_TAG_SHOW_NAME
GST_TAG_SHOW_SORTNAME
GST_TAG_SHOW_EPISODE_NUMBER
GST_TAG_SHOW_SEASON_NUMBER
GST_TAG_LYRICS
GST_TAG_COMPOSER_SORTNAME
GST_TAG_GROUPING
Fixes#599759
Setting an object name is nice for proper debug logging. Ideally this would
still happens earlier (.e.g when pads are added to an element, its not yet set).
Never skip the state change to playing, even if the element is already in the
right state. We need this because we also distribute the base_time while doing
the state change and skipping this step would leave some elements without a new
base_time.
Fixes#600313
gst_value_list_size and gst_value_list_get_value will do a series of
extra checks due to being public methods.
When we use them from within gstvalue.c we can directly use them without
the extra checks.
This makes ghostpad/proxypad creation 5 times faster and avoids contention
over the global funcptr lock.
I also moved the two class init down in the code to avoid having to forward
declare all the various functions.
gst_event_new_sink_message()
gst_event_parse_sink_message()
This event is used for sending a GstMessage downstream and synchronized
with the stream, to be posted by the sink once it reaches the sink.
Fixes bug #602275.
and install into a different directory $(libexecdir/gstreamer-0.10) so that
everything is versioned properly.
NOTE: run 'make clean' after updating; if you are running an uninstalled setup,
you will need to update your gst-uninstalled script (unless it's symlinked
to gstreamer core master) and exit/enter your uninstalled environment to get
the updated environment. If you are running an installed setup, you should
run 'make uninstall' before merging this change or remove the old
plugin-scanner binary manually.
Fixes#601698.
This reverts commit f864187bf5.
Reverting this as it changes behaviour and the documentation is
ambiguous about whether the caller must check the type first or
not (call must check type vs. returns NULL if not a string). If
GLib has been compiled with G_DISABLE_CHECKS then g_value_get_string()
may return complete garbage even if the value does not contain
a string. Better play it safe, esp. since the extra check is just
an integer comparison. For fundamental types we could return values
from the GValue structure directly if we really wanted to bypass
the extra check.
gst_util_greatest_common_divisor()
gst_util_double_to_fraction()
gst_util_fraction_to_double()
Using these instead of going over GValue has much lower overhead.
Also add float<->fraction transform functions for GValue.
Avoid a race where a miniobject is recycled and quickly freed, which causes the
g_type_free_instance() to be called on the same object twice.
Ref the object before calling the finalize method and check if we still need to
free it afterward.
Also add a unit test for this case.
Fixes#601587
This returns the internal feature list cookie, which changes every
time a feature is added or removed. This can be used by elements
to check if they should update their cached feature lists.
Force printf format checking for debug messages if GST_DISABLE_PRINTF_EXTENSION
is defined. This is useful to quickly check code for printf format mismatches
in debugging messages that would usually not be caught (with glibc+gcc and
printf extensions being used).
To use: make clean; make CFLAGS='-g -O2 -DGST_DISABLE_PRINTF_EXTENSION'
The logic to handle short reads/writes was incorrect, causing the
packet handler to attempt to handle incomplete packets.
Grow the packet transmit buffer in proportion to observed usage,
causing fewer reallocs.
Add some more debug in the registry chunks code.
When invalid registry chunks are received from the child, and parsing
fails, don't access an invalid plugin pointer. Instead attempt to
figure out which plugin caused the problem and blacklist it.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
If a downstream element returns an error while upstream has already
put all data into queue2 (including EOS), upstream will no longer
chain into queue2, so it is up to queue2 to perform some
EOS handling / message posting in such cases. See #589991.
Keep track of the max requested position and compare this to the write position
in the temp file to get the current amount of buffered data.
Fix memleak of all incomming buffers.
Fixes#588551
Don't flush the file by closing and opening it but instead use g_freopen. This
avoids a deadlock in shutdown because we emit the temp-location property change
with the wrong lock held.
Add a new temp-template property so that queue2 can securely allocate a
temporary filename. Deprecate the temp-location property for setting the
location but still use it to notify the allocated temp file.
Original commit message from CVS:
* docs/design/draft-keyframe-force.txt:
Fix typo.
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_handle_src_query):
Set buffering mode in the messages.
Set buffering percent in the query.
* tests/examples/seek/seek.c: (update_fill), (msg_state_changed),
(do_stream_buffering), (do_download_buffering), (msg_buffering):
Do some more fancy things based on the buffering method in use.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_close_temp_location_file), (gst_queue_handle_src_query),
(gst_queue_src_checkgetrange_function):
Include extra buffering stats in the buffering message.
Implement BUFFERING query.
* gst/playback/gsturidecodebin.c: (do_async_start),
(do_async_done), (type_found), (setup_streaming), (setup_source),
(gst_uri_decode_bin_change_state):
Only add decodebin2 when the type is found in streaming mode.
Make uridecodebin async to PAUSED even when we don't have decodebin2
added yet.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_out_rates),
(gst_queue_open_temp_location_file),
(gst_queue_close_temp_location_file), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_set_property):
Update the estimated input data when we push out a buffer.
Add some debug info about the temp file.
Only forward src events when we are not using a temp file.
Don't block the duration query, we need to find something better.
Don't leak the temp filename.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_is_filled):
The queue is never filled when there are no buffers in the queue at all.
Fixes#523993.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_init), (gst_queue_finalize),
(reset_rate_timer), (update_in_rates), (update_out_rates),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_chain), (gst_queue_loop):
Use separate timers for input and output rates.
Pause measuring the output rate when we block for more data.
See #503262.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_chain):
Pause the timer to measure the input rate when we block because the
queue is filled. See #503262.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_set_property):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/rtp/gstrtcpbuffer.c: (gst_rtcp_ntp_to_unix),
(gst_rtcp_unix_to_ntp):
* gst-libs/gst/rtsp/gstrtspmessage.c: (gst_rtsp_message_get_type):
* gst/playback/gstqueue2.c:
* tests/examples/seek/seek.c: (set_scale):
Fix a bunch of compile warnings shown with Forte.
* gst/audiorate/gstaudiorate.c:
Always pull in config.h before including any system headers.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_flush), (gst_queue_locked_enqueue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_src_activate_pull):
Also fix#476514 for queue2.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering):
Use other metrics as well when estimating the buffer level.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (make_decoder), (setup_source):
Small debug improvement.
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering),
(plugin_init):
Tweak the rate estimation period.
When calculating the buffer filledness in rate estimation mode, don't
mix it with other metrics.
Original commit message from CVS:
Patches by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_enqueue):
Fix a division by zero when the max percent is <= 0. Fixes#446572.
also update the buffering status when receiving events. Fixes#446551.
Original commit message from CVS:
Based on patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_peer_query),
(gst_queue_handle_src_query):
Wait for preroll before attempting to forward a duration query upstream.
Fixes#445505.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagossantos at gmail dot com>
* gst/playback/gstqueue2.c: (gst_queue_init),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_get_range), (gst_queue_src_checkgetrange_function),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_src_activate_pull):
Add pull based scheduling and fix some deadlocks. Fixes#444523.
Does not yet completely work because duration queries upstream won't
block yet.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_have_data),
(gst_queue_create_read), (gst_queue_read_item_from_file),
(gst_queue_open_temp_location_file), (gst_queue_locked_enqueue):
Include stdio to define fseeko.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_rates):
Tweak the buffering thresholds a little.
Update the buffer size with the previously calculate rate instead of
only when we calculate a new rate so that we get smoother buffering
updates.
* gst/playback/Makefile.am:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_base_init),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (unknown_type),
(add_element_stream), (no_more_pads_full), (no_more_pads),
(source_no_more_pads), (new_decoded_pad), (array_has_value),
(gen_source_element), (has_all_raw_caps), (analyse_source),
(remove_decoders), (make_decoder), (remove_source),
(source_new_pad), (setup_source), (decoder_query_init),
(decoder_query_duration_fold), (decoder_query_duration_done),
(decoder_query_position_fold), (decoder_query_position_done),
(decoder_query_latency_fold), (decoder_query_latency_done),
(decoder_query_seeking_fold), (decoder_query_seeking_done),
(decoder_query_generic_fold), (gst_uri_decode_bin_query),
(gst_uri_decode_bin_change_state), (plugin_init):
New element that intergrates a source, optional buffering element and
decodebin.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstqueue2.c: (gst_queue_get_type),
(gst_queue_class_init), (gst_queue_init), (gst_queue_finalize),
(gst_queue_getcaps), (gst_queue_bufferalloc),
(gst_queue_acceptcaps), (update_time_level), (apply_segment),
(apply_buffer), (update_buffering), (reset_rate_timer),
(update_rates), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_is_empty),
(gst_queue_is_filled), (gst_queue_chain), (gst_queue_push_one),
(gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_set_property), (gst_queue_get_property), (plugin_init):
On our way to playbin2 this is the new network queue that does buffering
all by itself using high and low watermarks. It can also measure up and
downstream bandwidth to optimally size the queue.
The default gst_pad_fixate_caps() previously would only fixate each individual
struct. In case there are multiple structs, the resulting caps would still not
be fixed. In the spirit of how individual structs are fixated, this patch
changes gst_pad_fixate_caps() to remove all but the first struct.
Fixes#595886
This avoids:
* triple-checking for the GType when type-checking is enabled (see #597260)
* Avoids going through an expensive no-argument checking which landed in
glib-2.22
* Avoids going through 2 extrac functions (g_object_new -> g_object_new_valist)
The OGI links are dead, so remove them. Also remove the paragraph that pointed
to OGI and DS. Only mentioning DS there made it a but pointless. Add a generic
paragraph instead that tells a bit about the usecases gstreamer covers.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
This avoids having to do the sorting everytime we use typefind
The behaviour of gst_type_find_factory_get_list has subtlely changed
in the sense that the order was previously undefined, whereas now
it returns them sorted by rank and then by name.
Simply use casting macros for accessing the message fields like we do for
buffers and events. Avoids some costly typechecking that does not really buy us
much.
CAPS_IS_ANY and CAPS_IS_EMPTY are the equivalent of their gst_caps_*
counterpart except that they avoid the typechecking and are inlined.
CAPS_IS_EMPTY_SIMPLE only checks for empty caps (without checking if
the caps is ANY).
Maintain a hashtable of the plugin basename. We can then use this
hashtable to speedup the search for an existing plugin and avoid
a whole lot of strcmp calls.
This patch adds gst_caps_set_value() and allows gst_caps_set_simple() to
work on non-simple caps. See the API documentation for the functions
about what they do.
The intention of these changes is to ease working with caps in caps
transform functions. An example for this would be ffmpegcolorspace,
where the caps transform function could be changed to look roughly like
this (pseudocode ahead):
result = gst_caps_copy (template_caps);
value = gst_structure_get_value (gst_caps_get_structure (caps, 0),
"widh");
gst_caps_set_value (result, value);
/* same for height, framerate and par */
return caps;
which is much cleaner and easier to understand than the current code.
https://bugzilla.gnome.org/show_bug.cgi?id=597690
This is slightly more efficient because the compiler can't do tail
recursion here and has to keep all stack frames.
Not that efficiency is that important here but I already had
the iterative version somewhere else and both are easy to read.
This allows the macosx versions to properly error out when fds are closed.
This is only a temporary fix until the pluginloader is switched to not
use GstPoll but GIOChannels.
In the plugin loader subprocess, move stdin and stdout to new fd's
so that plugins printing things during plugin init or (*gasp*)
possibly reading from stdin don't interfere with the data sent to
and from the parent.
When the plugin-scanner load fails (because the helper can't be
spawned), make sure to load the plugin that failed in-process, so
that all plugins do get loaded.
Fix an off-by-one error in the size guard for unpack_element, and
improve various debug statements in the failure paths.
Also, swap some g_new0 to g_malloc0 for the fun of it.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
Everyone running an uninstalled git setup is going to wonder about
this failure next time they update, so let's mention the solution
in the error message.
Reflow the code to move error handling to the end of the functions. Initialize
gvalue like we do in the setter. Add a unit-test module with two simple tests
the catche this bug.
We don't need the hold the proxy mutex locked for getting the internal pad and
for linking the new target pad when we retarget. So take the lock a little later
and release it earlier.
Fixes#596366
Guard against a hostile child process that sends bogus data
due to memory corruption by adding a magic number to each packet,
and limit the maximum size of any message to 32MB
When trying to find a function plugin-scanner, include a check on the
version of the binary registry chunks it sends, to make sure it's
what we understand.
Add a simple version check when starting the plugin-scanner so we can
verify we're talking to one that talks the same language.
First try a plugin-scanner in the installed path, then try one via the
GST_PLUGIN_SCANNER env var if that doesn't work.
Update the uninstalled script.
Install the plugin-scanner to the libexec dir
When updating the registry, we don't need to re-read the registry cache
and waste time replacing all our existing, hopefully identical, plugins
and features that we're about to re-scan anyway.
