when downsampling, the output buffer can be filled before all the input
samples are consumed. this is correct: when downsampling, several input
samples are needed for each output sample, so when only a small number of
input samples are available the number of output samples produced can be 0.
the resampler, however, was discarding those extra input samples instead of
clocking them into its filter history for the next iteration. this patch
fixes this by removing the check that the output buffer is full. the code
now always loops until all input samples are consumed, and relies on the
calling code to have provided a suitably sized location for the output.
note that there are already other checks in place in the calling code to
ensure that this is the case.
https://bugzilla.gnome.org/show_bug.cgi?id=732908
If we had plugins and an error occurred we only include the error message
caused by this, otherwise we will include the codec description as generated
from the caps.
This allows to detect which exact codec was missing instead of getting a
generic "no suitable decoders found" error message.
Otherwise we might change some capsfeatures from ANY to the specific
value from the filter and do not filter those out in case the
sink doesn't support them
https://bugzilla.gnome.org/show_bug.cgi?id=734822
Gracefully handle switching groups that all pads are deadend.
This can happen when quickly switching programs on mpegts as the
output is unaligned it can happen that not enough data was accumulated at
parsers to generate any buffers, causing the stream to receive EOS before
any data can be decoded.
To handle this scenario, the _expose function now also gets if there is
any next group to be exposed along with the list of endpads. If there are
no endpads and there is another group to expose it will switch to this next
group and then retry exposing the streams.
Also, the requirement to only switch from the chain that has the endpad had
to be modified to care for when the drainpad is NULL
https://bugzilla.gnome.org/show_bug.cgi?id=733169
Set up a fakesink with a pad probe to replace the missing encoder to detect
if encoding was really required and only error out in this case. Otherwise
just let passthrough branch work.
This delays the error posting from the set_state function to when buffers
are really flowing. Unit test updated accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=650652
Unsetting DISCONT flag means we need to copy the buffer. This copy operation
mandates that all GstMemory should be copy-able which is not always the case
https://bugzilla.gnome.org/show_bug.cgi?id=727409
We now add all our elements to uridecodebin *after*
GstBin::change_state(READY->PAUSED), so we need to post async-start
and async-done messages ourselves if we want to work async.
https://bugzilla.gnome.org/show_bug.cgi?id=733495
We now add all our elements to uridecodebin *after*
GstBin::change_state(READY->PAUSED), so we need to post async-start
and async-done messages ourselves if we want to work async.
https://bugzilla.gnome.org/show_bug.cgi?id=733495
otherwise we're going to
a) start Parser/Converter before they are linked to their capsfilter,
breaking their negotiation of a proper stream format
b) start demuxers without having connected to their pad-added signals. We
miss pads and in the worst case don't link any pads at all
... and if this fails for whatever reason we skip the element and instead
try with the next element. This allows us to handle elements that fail
when setting caps on them by just skipping to the next alternative element.
They might fail to go to PAUSED, and when connecting them further
we might already expose their srcpads on decodebin if we're unlucky.
This prevents us to handle failures going to PAUSED gracefully.
If the caps query returned us fixed caps this doesn't mean yet
that these caps are actually complete (fields might be missing).
It allows to do us some decisions, but the selection of the next
element should be delayed as only complete caps allow proper selection
of the next element.
Otherwise we might try to continue autoplugging e.g. for a specific
stream-format although the parser could convert to something else, thus giving
us potentially less options for decoders.
We can't convert to ANY capsfeatures, they are only there so that we
can passthrough whatever downstream can support... but we definitely
don't want to return them to upstream.
Canceling the accept/select happens when the source is shut down. This is
not an error and the GST_FLOW_ERROR causes problems when only part of the
pipeline is shut down.
https://bugzilla.gnome.org/show_bug.cgi?id=731567
When playing RTSP streams there will be one decodebin per stream. If some of
them fail because of a missing plugin we should not fail completely but play
the supported streams at least.
https://bugzilla.gnome.org/show_bug.cgi?id=730868
Aggregate buffering messages to only post the lower value
to avoid setting pipeline to playing while any multiqueue
is still buffering.
There are 3 scenarios where the entries should be removed from
the list:
1) When decodebin is set to READY
2) When an element posts a 100% buffering (already implemented)
3) When a multiqueue is removed from decodebin.
For item 3 we don't need to handle it because this should only
happen when either 1 is hapenning or when it is playing a
chained file, for which number 2 should have happened for the
previous stream to finish
https://bugzilla.gnome.org/show_bug.cgi?id=726423
Otherwise we might end up inside the callback without having stored
the probe id... then try to remove that probe (not!) from the callback
and wait forever for the pad to unblock.
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
It was already checked in an early out, and as it's only
incremented for at most the size of the passed buffer, it
can only become NULL in an address wraparound.
While there, don't cast away const on a pointer.
Coverity 1139845
This provides an audio-filter and video-filter property to allow
applications to set filter elements/bins. The idea is that these will
e
applied if possible -- for non-raw sinks, the filters will be skipped.
If the application wishes to force the application of the filters, this
can be done by setting the new flag introduced on playsink -
GST_PLAY_FLAG_FORCE_FILTERS.
https://bugzilla.gnome.org/show_bug.cgi?id=679031
This provides an audio-filter and video-filter property to allow
applications to set filter elements/bins. The idea is that these will be
applied if possible -- for non-raw sinks, the filters will be skipped.
If the application wishes to force the application of the filters, this
can be done by setting the new flag introduced on playsink -
GST_PLAY_FLAG_FORCE_FILTERS.
https://bugzilla.gnome.org/show_bug.cgi?id=679031
2 seconds might be too small for some container formats, e.g.
MPEGTS with some video codec and AAC/ADTS audio with 700ms
long buffers. The video branch of multiqueue can run full while
the audio branch is completely empty, especially because there
are usually more queues downstream on the audio branch.
Usually these buffers are multiple seconds large, and having a maximum
of 5 buffers in the multiqueue there can use a lot of memory. Lower
this to 2 for adaptive streaming demuxers.
The typefinder returns LIKELY for as little as one possible
sync and no bad sync (not even taking into account how much
data was looked at for that). It's generally just not fit
for purpose, so should just not return anything like LIKELY
at all ever, even more so since it only recognises one out
of ten H263 files, and likes to mis-detect mp3s as H263.
https://bugzilla.gnome.org/show_bug.cgi?id=700770https://bugzilla.gnome.org/show_bug.cgi?id=725644
If we have the peer caps and a caps filter, return peer_caps +
intersect_first (filter, converter_caps) instead of
intersect_first (filter, peer_caps + converter_caps) and preservers
downstream caps preference order.
https://bugzilla.gnome.org/show_bug.cgi?id=724893
If we are using an adaptive stream demuxer, which outputs a non-container
stream, we are putting another multiqueue after the *parser* following
the adaptive stream demuxer. We do not want to add another instance of
the same parser right after this multiqueue.
Otherwise we will emit buffering messages not just from the last
multiqueue but also from previous multiqueues... confusing the
application with different percentages during pre-rolling.
For adaptive streaming demuxer we insert a multiqueue after
this demuxer. This multiqueue will get one fragment per buffer.
Now for the case where we have a container stream inside these
buffers, another demuxer will be plugged and after this second
demuxer there will be a second multiqueue. This second multiqueue
will get smaller buffers and will be the one emitting buffering
messages.
If we don't have a container stream inside the fragment buffers,
we'll insert a multiqueue below right after the next element after
the adaptive streaming demuxer. This is going to be a parser or
decoder, and will output smaller buffers.
Adaptive streams should download its data inside the demuxer, so
we want to use multiqueue's buffering messages to control the
pipeline flow and avoid losing sync if download rates are low;
https://bugzilla.gnome.org/show_bug.cgi?id=707636
Otherwise there's an interesting race condition when we destroy
the inputselector (actually it will be destroyed later when its state
change message gets destroyed) and afterwards release its sinkpad.
This is the code path when the last channel is removed from the
input selector.
Gave this warning sometimes, for chained oggs or whenever else
we change decode groups:
GStreamer-CRITICAL **: Padname '':sink_0 does not belong to element inputselector0 when removing
MONO and NONE position are the same, for example, but in
general there isn't much to do here for such a conversion.
Fixes problem in audioconvert, which would end up using
a mixmatrix when converting between different mono format
because it thinks MONO positioning is different from
unpositioned channels, which is not the case in this
special case. The mixmatrix would end up being 0.0 so
audioconvert would convert to silence samples.
https://bugzilla.gnome.org/show_bug.cgi?id=724509
If the text pads does not go away we just set the overlay to silent, which
allows us to immediately re-enable subs later again. However before this
change we also released the streamsynchronizer text pads, which deadlocked
because there was still dataflow going on. Just do this only if we remove
the complete chain.
https://bugzilla.gnome.org/show_bug.cgi?id=683504
Change the way autoplug-select is accumulated so that it's possible to have
multiple handlers. The handlers keep getting called as long as they keep
returning GST_AUTOPLUG_SELECT_TRY.
One practical example of when this is needed is when hooking into playbin's
uridecodebin, which is perhaps not very elegant but the only way to influence
which streams playbin autoplugs/exposes.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=723096
Discussion on IRC indicated that the main reason for this list was to
prevent demuxers that can trigger a lot of seeking from using
progressive buffering using queue2 (which due to being seekable triggers
that behaviour).
However given that upstream can indicate seeks are possible but should
be avoided via a scheduling query, this extra whitelisting shouldn't be
necessary for well-behaved demuxers.
https://bugzilla.gnome.org/show_bug.cgi?id=704933
Make a little table of conversions and manually score them. Use this
info to define better weights for the scoring algorithm.
give separate scores for doing changes and the impact of the change,
This allows us to avoid conversion when we can but still allow fairly
lossless changes.
The old code did not penalize GRAY conversions, PAL conversions were
punished too low and depth conversions too high.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=722656
Don't try to interpolate the chroma samples, the used algorithm only
works for horizontal cositing. Let's switch to a faster and safer
version until we handle chroma siting correctly in the fastpaths.
Rework the orc code to be around 10% faster and support arbitrary matrices.
Pass the matrix parameters to the YUV->RGB functions to make them work
for all matrices. This enables more and faster fastpath conversions.
See https://bugzilla.gnome.org/show_bug.cgi?id=721701
This fast-path was adding 128 to every component including
alpha while it should only be done for all components except
alpha. This caused wrong alpha values to be generated.
Also remove the high-quality I420 to BGRA fast-path as it needs
the same fix, which causes an additional instruction, which causes
orc to emit more than 96 variables, which then just crashes.
This can only be fixed in orc by breaking ABI and allowing more
variables.
If a pipeline fails to preroll, it might happen that the sinks are
put into READY state from playbin's sink activation, but they are never
set to playsink, so they aren't being managed by a GstBin and will keep
their READY state until they are unreffed, leading to a warning.
Prevent this by always forcing them to NULL when deactivating a group
https://bugzilla.gnome.org/show_bug.cgi?id=708789
Fix component ordering, it's wrong in both the scanline and merge
function so it cancels eachother out and isn't really a except for
loss of precision of the green component.
Fix calculation of the filter weight
Some of the fastpath function can only work with aligned widht/height
so make sure we check this as well when choosing a fastpath.
Add fastpath for I420/YV12 -> BGRx
This commit adds detection of the "dash" and "avc3" compatible brands
in qt_type_find.
Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new
structure for fragmented MP4 called "avc3". The principal difference
between AVC1 and AVC3 is the location of the codec initialisation
data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV
box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in
the first sample of every fragment (i.e. the first sample in each mdat
box). The principal reason for avc3 is to make it easier for client
implementations, because it removes the requirement to insert the
SPS+PPS in to the decoder pipeline every time there is a representation
change.
https://bugzilla.gnome.org/show_bug.cgi?id=702004
Increase the number of temporary lines that we need, it is possible that the
up and downsampling offsets are out of phase and that we need to keep some
extra lines around. Also copy the unhandled output lines for the next round
instead of overwriting them.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=706823
When playing mp3 files from a smb server, we get 64k read requests
that mostly overlap. Without using the cache to partially satisfy
these, we send these requests straight to the server, resulting in
a lot more network traffic than necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=705415
Each write will update the last_activity_time and otherwise we would
compare against a too old current time and immediately timeout because
current time is smaller than last activity time (overflow).
Each write will update the last_activity_time and otherwise we would
compare against a too old current time and immediately timeout because
current time is smaller than last activity time (overflow).
Remove dodgy code that detects mp3 with as little as
a valid frame sync at the beginning. This was only used
in some unit tests in -good where there were only a few
bytes after the id3 tag. We now require at least two
frame headers.
Fixes mis-dection of text files with UTF-16 LE BOM as mp3.
https://bugzilla.gnome.org/show_bug.cgi?id=681368
We have to hold the streams-lock when iterating over all pads,
also the stream-lock of the pad is already locked when we receive
EOS.
Call gst_pad_event_default() for the correct default handling of
events.
This commit adds a streamcombinerpad with an is_eos field.
When streamcombiner receives an EOS on one of its pads, it
forwards it all its other pads are EOS.
This commit also removes the notion of "stream-switching-eos".
In gst_sub_parse_dispose() parser_type will be UNKNOWN,
so these deinit calls were never executed. And we should
clean up the parser state in the downwards state change
anyway.
To celebrate 2013.gnome.asia, updated sami parser for gstreamer 1.x. :D
Remove conditional block for check libxml usage and
implement a simple html markup parser for the sami
parser.
https://bugzilla.gnome.org/show_bug.cgi?id=693056
Otherwise we will remove the bus that would proxy messages to playsink
and never set it again. If the sink is already in playsink, all failures
are fatal anyway as it's either a sink that worked before or one that
was set by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=701997
playbin will now only activate the sinks in a single place and
will never change the states of any sinks that are owned by
playsink.
Also handle text-sinks the same way as audio/video sinks inside
playbin.
With the current test, we get into problems when we try to typefind
a MPEG stream from a small amount of data, which can happen when
we get data pushed from a HTTP source. We thus make a second test
to give higher probability if all the potential headers were either
pack or pes headers (ie, no potential header was unrecognized).
This fixes an issue with a MPEG1/MP2 stream being properly discovered
as video/mpeg from a file, but as audio/mpeg from souphttpsrc.
https://bugzilla.gnome.org/show_bug.cgi?id=703256
This makes sure the application gets any context related messages and
can do whatever is required to a) get the sink a context or b) share
the context with other elements in the pipeline.
The proxying is necessary because the sink is not a child element of
playbin, but instead will at a later point be a child of some bin
inside playsink.
https://bugzilla.gnome.org/show_bug.cgi?id=700967
Otherwise we're going to deadlock forever because no autoplugging
happens without having caps, but caps can never be send because
we're blocking.
Serialized queries before caps should never be sent unless really
necessary.
