Original commit message from CVS:
* sys/winks/gstksclock.c (gst_ks_clock_worker_thread_func,
gst_ks_clock_start):
Synchronize KS clock as a single-shot operation for now, there's not
much point in doing it periodically until we're actually using the
KS timestamps for anything else than just discarding old frames.
* sys/winks/gstksvideosrc.c (gst_ks_video_src_open_device):
Provide the GstClock when opening the device if we already have one.
Original commit message from CVS:
* sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp,
gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin,
gst_ks_video_device_set_state, gst_ks_video_device_request_frame,
gst_ks_video_device_read_frame):
Guard against capturing old frames by keeping track of the last
timestamp and also zero-fill the buffers before each capture.
Only assign a master clock if the pin hasn't already got one.
Actually free buffers on the way down to avoid a huge memory leak,
as this was previously done when changing state to ACQUIRE downwards
and we now skip that state on the way down.
Add some debug.
* sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME,
DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK,
KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT,
KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING,
KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING,
KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name,
device_index, running, worker_thread, worker_lock,
worker_notify_cond, worker_result_cond, worker_state,
worker_pending_caps, worker_setcaps_result, worker_pending_run,
worker_run_result, gst_ks_video_src_reset,
gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device,
gst_ks_video_src_close_device, gst_ks_video_src_worker_func,
gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker,
gst_ks_video_src_change_state, gst_ks_video_src_set_clock,
gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer,
gst_ks_video_src_create):
Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all.
Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the
GStreamer clock, it doesn't seem to hurt and matches DirectShow's
behavior. As an added bonus we usually get PresentationTime set for
each frame, so we can expand on this later for smarter latency
reporting (by looking at the diff between the timestamp from the
driver and the time according to the GStreamer clock).
Use an internal worker thread for opening the device, setting caps,
changing its state and closing it. This way we're a lot more
compatible with drivers that rely on hacks to do video-effects
between the low-level NT API and the application. Ick.
Start the ks clock and set the pin to KSSTATE_RUN on the first
create() so that we'll hopefully get hold of the GStreamer clock
from the very beginning. This way there's no chance that the
timestamps will make a sudden jump in the beginning of the stream
when we're running with a clock.
* sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG,
ks_options_flags_to_string):
Reorder the flags to match the headerfile order, and make the string
a bit more compact.
* sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps):
Avoid leaking KSPROPERTY_PIN_DATARANGES.
Original commit message from CVS:
* sys/winks/ksvideohelpers.c (ks_video_media_type_free):
Avoid leaking the KSDATARANGE member of each KsVideoMediaType.
Original commit message from CVS:
* sys/winks/gstksvideodevice.c (gst_ks_video_device_class_init,
gst_ks_video_device_set_state):
Don't set the pin state to KSSTATE_RUN from the streaming thread.
Skip KSSTATE_ACQUIRE when changing pin state downwards.
Be nice and specify G_PARAM_STATIC_STRINGS.
Remove unused finalize method.
* sys/winks/gstksvideosrc.c (DEFAULT_ENABLE_QUIRKS, PROP_ENABLE_QUIRKS,
enable_quirks, gst_ks_video_src_class_init, gst_ks_video_src_init,
gst_ks_video_src_finalize, gst_ks_video_src_get_property,
gst_ks_video_src_set_property, gst_ks_video_src_reset,
gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_change_state,
gst_ks_video_src_set_caps):
First driver quirk: work around Logitech's hostile driver software to
improve stability and performance. See comments for details.
Provide a property to disable driver quirks (enabled by default).
Be nice and specify G_PARAM_STATIC_STRINGS.
Remove unused dispose method.
Tweak include order.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
* sys/winks/Makefile.am:
* sys/winks/gstksclock.c:
* sys/winks/gstksclock.h:
* sys/winks/gstksvideodevice.c:
* sys/winks/gstksvideodevice.h:
* sys/winks/gstksvideosrc.c:
* sys/winks/gstksvideosrc.h:
* sys/winks/kshelpers.c:
* sys/winks/kshelpers.h:
* sys/winks/ksvideohelpers.c:
* sys/winks/ksvideohelpers.h:
New plugin for low-latency video capture on Windows (#519935).
Uses Kernel Streaming, the lowest level API for doing video capture
on Windows (more or less just raw ioctls).
Original commit message from CVS:
* gst/pcapparse/gstpcapparse.c:
* sys/winscreencap/gstdx9screencapsrc.c:
* sys/winscreencap/gstgdiscreencapsrc.c:
Added documentation blobs. Thanks to Stefan for noticing!
Original commit message from CVS:
* sys/dshowdecwrapper/gstdshowaudiodec.c:
Flip mpeg1/mpeg2 arrays for mpeg audio. Detect which type the audio
is correctly, instead of backwards. No functional changes, since this
mistake was completely self-consistent.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
* sys/acmenc/Makefile.am:
* sys/acmenc/acmenc.c:
Add new windows ACM encoder wrapper.
Original commit message from CVS:
* sys/dshowdecwrapper/gstdshowaudiodec.c:
* sys/dshowdecwrapper/gstdshowaudiodec.h:
* sys/dshowdecwrapper/gstdshowvideodec.c:
* sys/dshowdecwrapper/gstdshowvideodec.h:
* sys/dshowvideosink/dshowvideosink.cpp:
* sys/dshowvideosink/dshowvideosink.h:
Initialise COM with default flags.
Only deinitialise if the initialisation was successful.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
Print the pad-name in debug log.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
Use "-" instead of "_" in property names. Can we call them just
"device" like everywhere else?
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* ext/sndfile/gstsf.c: (plugin_init):
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_plugin_init):
* sys/oss4/oss4-audio.c: (plugin_init):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* sys/dshowdecwrapper/gstdshowaudiodec.c:
Revert previous patch apart from typo fixes; the patch was not
independently useful.
Original commit message from CVS:
Based on patch by: Alessandro Decina <alessandro@nnva.org>
* sys/dshowdecwrapper/gstdshowaudiodec.c:
* sys/dshowdecwrapper/gstdshowdecwrapper.h:
* sys/dshowdecwrapper/gstdshowvideodec.c:
Add AAC, AC3 to handled codecs.
Fix handling of flush events.
Improve debug/error output.
Fix a number of typos in comments and variable names.
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* sys/dshowvideosink/dshowvideofakesrc.cpp:
* sys/dshowvideosink/dshowvideofakesrc.h:
* sys/dshowvideosink/dshowvideosink.cpp:
* sys/dshowvideosink/dshowvideosink.h:
Fix up copyright notice on new plugin.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
* sys/dshowvideosink/Makefile.am:
* sys/dshowvideosink/README:
* sys/dshowvideosink/dshowvideofakesrc.cpp:
* sys/dshowvideosink/dshowvideofakesrc.h:
* sys/dshowvideosink/dshowvideosink.cpp:
* sys/dshowvideosink/dshowvideosink.h:
Add a new win32 videosink. Uses the DirectShow renderers for
high-performance video rendering on win32.
Currently only supports some YUV formats.
Rank PRIMARY, since it's much more useful for the common cases that the
directdraw sink (which only does RGB).
Original commit message from CVS:
Based on patch by: <onkarshinde at gmail dot com>
* sys/vcd/vcdsrc.c: (gst_vcdsrc_uri_get_uri),
(gst_vcdsrc_uri_set_uri):
Allow the track to be set by using the uri. Fixes#535043.
Original commit message from CVS:
* sys/oss4/oss4-mixer.c: (gst_oss4_mixer_open):
* sys/oss4/oss4-property-probe.c:
(gst_oss4_property_probe_find_device_name),
(gst_oss4_property_probe_find_device_name_nofd):
* sys/oss4/oss4-property-probe.h:
* sys/oss4/oss4-sink.c: (gst_oss4_sink_get_property):
* sys/oss4/oss4-source.c: (gst_oss4_source_get_property):
Make device-name probing in NULL state work better (e.g. for the
gnome-control-center sound capplet).
Original commit message from CVS:
Based on patch by: Clive Wright <clive_wright ntlworld com>
* sys/oss4/oss4-mixer-slider.c: (gst_oss4_mixer_slider_unpack_volume):
Apparently mono sliders have the mono value repeated in the upper bits,
so mask those out when reading them. Probably makes the mixer applet
work properly in some more cases.
Original commit message from CVS:
* gst-libs/gst/dshow/Makefile.am:
Use CXXFLAGS rather than CFLAGS; these are C++ files.
Define required constants appropriately.
* sys/dshowdecwrapper/Makefile.am:
Add required include dir, libraries.
Define required constants appropriately.
Original commit message from CVS:
* ext/dirac/gstdiracenc.cc:
Fix compilation by casting string constants.
* sys/Makefile.am:
Fix WININET_DIR variable reference.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas at tandberg com>
* sys/dshowsrcwrapper/gstdshowvideosrc.c: (PROP_DEVICE_NAME),
(gst_dshowvideosrc_class_init), (gst_dshowvideosrc_init),
(gst_dshowvideosrc_dispose), (gst_dshowvideosrc_stop),
(gst_dshowvideosrc_unlock), (gst_dshowvideosrc_unlock_stop),
(gst_dshowvideosrc_create), (gst_dshowvideosrc_push_buffer):
* sys/dshowsrcwrapper/gstdshowvideosrc.h:
Don't increase latency by queuing buffers in an async queue when
the streaming thread can't keep up or isn't scheduled often
enough for some other reason, but just drop the previous buffer
in that case. Also implement GstBaseSrc::unlock for faster
unlocking when shutting down. (#520892).
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas at tandberg com>
* configure.ac:
* sys/Makefile.am:
* sys/wininet/Makefile.am:
* sys/wininet/gstwininetsrc.c:
* sys/wininet/gstwininetsrc.h:
Add wininetsrc for basic http/ftp support on windows (#520897).
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
* sys/dvb/parsechannels.c:
Add DVB-C support. Special thanks to Christian Schaller
for a testing ground.
Original commit message from CVS:
* sys/dvb/camutils.c:
Don't free the program descriptors, this structure
containing them is stills tored after.
Fixes data corruption.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Add initial support for multiproto driver (not yet merged into
v4l-dvb mainline yet).
Only works for DVB-S not DVB-S2, DVB-T, DVB-C or other.
Original commit message from CVS:
* gst-libs/gst/dshow/Makefile.am:
* sys/dshowdecwrapper/Makefile.am:
* sys/dshowsrcwrapper/Makefile.am:
Add Makefiles to win32 plugins and lib.
They will need to be tested and probably fixed by developers
working with mingw. This is a first step to include source files
with releases.
Original commit message from CVS:
* ext/xvid/gstxvidenc.c:
* gst/vmnc/vmncdec.c:
* sys/glsink/glimagesink.c:
* sys/glsink/gstgldisplay.c:
Fix some finalize leaks by chaining up to the parent method.
Original commit message from CVS:
* sys/fbdev/gstfbdevsink.c: (gst_fbdevsink_class_init),
(gst_fbdevsink_finalize):
Free the device string in finalize. Fixes bug #515722.
Original commit message from CVS:
* sys/dvb/Makefile.am:
* sys/dvb/dvbbasebin.c:
Add URI Handler for dvb.
Re-order pad templates to workaround a bug in playbasebin.
* sys/dvb/parsechannels.c:
* sys/dvb/parsechannels.h:
Add code to parse channels from zap-style channels.conf files.
Original commit message from CVS:
* ext\neon\gstneonhttpsrc.c:
Include unistd.h only if _HAVE_UNISTD_H is defined
* gst\mpegvideoparse\mpegvideoparse.c:
Use G_GUINT64_CONSTANT GLIB macro for constant
* sys\dshowsrcwrapper\gstdshowaudiosrc.c:
* sys\dshowsrcwrapper\gstdshowvideosrc.c:
* sys\dshowdecwrapper\gstdshowaudiodec.c:
* sys\dshowdecwrapper\gstdshowaudiodec.h:
* sys\dshowdecwrapper\gstdshowdecwrapper.c:
* sys\dshowdecwrapper\gstdshowdecwrapper.h:
* sys\dshowdecwrapper\gstdshowvideodec.c
* sys\dshowdecwrapper\gstdshowvideodec.h:
Add a DirectShow decoder wrapper.
* win32\MANIFEST:
Add new win32 files to MANIFEST
* win32\vs6\gst_plugins_bad.dsw:
* win32\vs6\libgstdshow.dsp:
* win32\vs6\libgstdshowdecwrapper.dsp:
* win32\vs6\libgstflv.dsp:
Add new projects to bad workspace
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Post bus message about adapter type and it's capabilities,
when opening the frontend.
After failing to read from the dvr, post a bus message to
inform the app.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Do not go on forever if problem with reading from dvr, rather
return NULL.
Handle some cleanup issues of closing filedescriptors when
failing to tune or similar.
Original commit message from CVS:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldisplay.c:
* sys/glsink/gstgldisplay.h:
* sys/glsink/gstglupload.c:
Handle xoverlay exposes correctly. This means glimagesink works
correctly most of the time in totem (fullscreening being an
execption). Doesn't handle expose events directly to the GL
window.
Original commit message from CVS:
* configure.ac:
* sys/glsink/Makefile.am:
Switch to using pkgconfig to detect libGL. Since we use
recent features added to Mesa, there's no point in adding
a check for pre-pkgconfig versions.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_get_property):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_show_frame):
* gst/mve/gstmvemux.c: (gst_mve_mux_request_new_pad):
* sys/dvb/dvbbasebin.c: (dvb_base_bin_class_init):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x and don't
abort() in any case but properly report the error.
Original commit message from CVS:
* sys/glsink/glimagesink.c:
* sys/glsink/gstglupload.c:
Change glimagesink over to using GL buffers. This breaks
glimagesink for normal operation, but should be fixed soon.
Original commit message from CVS:
* sys/glsink/gltestsrc.c:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglfilterexample.c:
* sys/glsink/gstgltestsrc.c:
* sys/glsink/gstglupload.c:
Convert gldownload to BaseTransform. Make glfilterexample
visually interesting. Add support for various formats to
downloading. Fix a few places where we leak GL state to
other elements (bad, but hard to prevent).
Original commit message from CVS:
* sys/glsink/BUGS:
* sys/glsink/Makefile.am:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstglconvert.c:
* sys/glsink/gstgldisplay.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglfilter.h:
* sys/glsink/gstglfilterexample.c:
* sys/glsink/gstgltestsrc.c:
* sys/glsink/gstglupload.c:
* sys/glsink/gstopengl.c:
Remove code that handles non-texture buffers. Add a
GstGLBufferFormat type that corresponds to how to use the
texture, not the original video format. Convert gstflfilter.c
into a base class, add glfilterexample and glconvert elements.
* sys/glsink/color_matrix.c:
Minor ramblings about color conversion matrices.
Original commit message from CVS:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
Clean up code. Fix a few leaks.
Original commit message from CVS:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglupload.c:
Rewrite a bunch of code to use textures as the intermediate
instead of renderbuffers. upload, download, filtering all
work.
Original commit message from CVS:
* sys/glsink/glextensions.c:
* sys/glsink/glextensions.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglupload.c:
A careful read of the documentation reveals that I can't use
renderbuffers as textures. Duh. Checkpoint because I'm about
to rewrite a bunch of code.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glextensions.c:
* sys/glsink/glextensions.h:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstglbuffer.c:
* sys/glsink/gstglbuffer.h:
* sys/glsink/gstgldownload.c:
* sys/glsink/gstglfilter.c:
* sys/glsink/gstglupload.c:
* sys/glsink/gstopengl.c:
Switch to using framebuffer_objects instead of GLXPixmaps,
because that's what my driver supports. Remove GLDrawable,
since GstGLDisplay now has a default drawable and context.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstopengl.c:
* sys/glsink/gstglupload.c:
Use new GstVideoFormat checked into -base. Add new glupload
element to upload raw video into a GLXPixbuf. Untested. Will
likely crash your motorcycle if you try it.
* sys/glsink/gstvideo-common.c:
* sys/glsink/gstvideo-common.h:
Remove.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glextensions.c:
* sys/glsink/glextensions.h:
* sys/glsink/glvideo.c:
Add vblank synchronization. Isn't really working on my
driver. :(
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstvideo-common.c:
* sys/glsink/gstvideo-common.h:
Add support for xRGB, xBGR, and AYUV. Re-add support for
power-of-2 textures.
Original commit message from CVS:
* sys/glsink/gstvideo-common.c:
* sys/glsink/gstvideo-common.h:
Pull together some common raw video functions into one location.
This should eventually move to -base.
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glimagesink.h:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
* sys/glsink/gstopengl.c:
Use the new video-common.h stuff. Readd support for RGB video.
Original commit message from CVS:
* sys/glsink/Makefile.am:
* sys/glsink/glimagesink.c:
* sys/glsink/glvideo.c:
* sys/glsink/glvideo.h:
Split out gl-related code into a separate file with a
sensible API. Major cleanup. Still crashes occasionally
due to different threads touching bits at the same time.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
A sub table is identified by the pair table_id and
sub_table_identifier, not by pid. So hash with that.
* sys/dvb/dvbbasebin.c:
Make sure initial pids are added properly to filter,
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Remove signals for pat, pmt, nit, eit, sdt. Replace with bus
messages.
* sys/dvb/dvbbasebin.c:
Instead of attaching to signals, use the bus messages.
Also fix up so the dvbsrc starts only outputting the info tables
like PAT, CAT, NIT, SDT, EIT instead of the whole ts.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
pat-info is now a signal not a GObject property that
gets notified.
pat-info, pmt-info now instead of passing a GObject as
a parameter, pass a GstStructure.
New signals: nit-info, sdt-info, eit-info for DVB SI information
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
Cam code now uses the pmt GstStructure passed from mpegtsparse
signals rather than the GObject.
* sys/dvb/dvbbasebin.c:
Use new signals in mpegtsparse and use GstStructures as per
mpegtsparse's modified API.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/dshow/gstdshowfakesink.cpp:
(CDshowFakeSink.CDshowFakeSink):
* gst-libs/gst/dshow/gstdshowfakesink.h: (CDshowFakeSink.m_hres):
Fix crasher in constructor due to the base class's constructor
not necessarily being NULL-safe (depends on the SDK version used
apparently; #492406).
* sys/dshowsrcwrapper/gstdshowaudiosrc.c: (gst_dshowaudiosrc_prepare):
* sys/dshowsrcwrapper/gstdshowvideosrc.c: (gst_dshowvideosrc_set_caps):
Fix a couple of MSVC compiler warnings (#492406).
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Actually use the code-rate-hp parameter for DVB-S.
It turns out setting to AUTO does not always work (
especially in diseq situations). Set by default to
FEC_AUTO.
Original commit message from CVS:
patch by: Alessandro Decina
* sys/dvb/Makefile.am:
* sys/dvb/cam.c:
* sys/dvb/cam.h:
* sys/dvb/camapplication.c:
* sys/dvb/camapplication.h:
* sys/dvb/camapplicationinfo.c:
* sys/dvb/camapplicationinfo.h:
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camresourcemanager.c:
* sys/dvb/camresourcemanager.h:
* sys/dvb/camsession.c:
* sys/dvb/camsession.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camtransport.c:
* sys/dvb/camtransport.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
* sys/dvb/dvbbasebin.c:
* sys/dvb/dvbbasebin.h:
* sys/dvb/gstdvb.c:
* sys/dvb/gstdvbsrc.c:
* sys/dvb/gstdvbsrc.h:
Integrate SoC work done by Alessandro for the Freevo project.
Adds cam support to the dvb stack in GStreamer and a new
element (actually a bin) called dvbbasebin that integrates
dvbsrc and mpegtsparse to a) handle decryption and b) allow
acquiring multiple channels on same transponder without
knowing pid numbers.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/inspect/plugin-waveform.xml:
* sys/waveform/gstwaveformplugin.c:
* sys/waveform/gstwaveformsink.c:
* sys/waveform/gstwaveformsink.h:
* win32/MANIFEST:
* win32/vs6/libgstwaveform.dsp:
Remove the waveform plugin now that it is in -good.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdraw_sink_class_init):
Rename the keep-aspect-ratio property to force-aspect-ratio to make
it consistent with xvimagesink and ximagesink.
Original commit message from CVS:
* sys/glsink/glimagesink.c: (gst_glimage_sink_stop),
(gst_glimage_sink_create_window), (gst_glimage_sink_init_display):
Sprinkle in some XSync calls to avoid raciness with broken
drivers (ATI) when re-using a single glimagesink.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdraw_sink_buffer_alloc),
(gst_directdraw_sink_show_frame),
(gst_directdraw_sink_check_primary_surface),
(gst_directdraw_sink_check_offscreen_surface),
(EnumModesCallback2), (gst_directdraw_sink_get_ddrawcaps),
(gst_directdraw_sink_surface_create):
* sys/directdraw/gstdirectdrawsink.h:
Fix more warnings when compiling with MingW (#439914).
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
Remove directsoundsink property doc as this sink use the mixer
interface now.
* docs/plugins/gst-plugins-bad-plugins.interfaces:
Add interfaces implemented by Windows sinks.
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Remove directsoundsink property and implement the mixer interface.
* win32/vs6/gst_plugins_bad.dsw:
* win32/vs6/libgstdirectsound.dsp:
Update project files.
* gst-libs/gst/dshow/gstdshow.cpp:
* gst-libs/gst/dshow/gstdshow.h:
* gst-libs/gst/dshow/gstdshowfakesink.cpp:
* gst-libs/gst/dshow/gstdshowfakesink.h:
* gst-libs/gst/dshow/gstdshowfakesrc.cpp:
* gst-libs/gst/dshow/gstdshowfakesrc.h:
* gst-libs/gst/dshow/gstdshowinterface.cpp:
* gst-libs/gst/dshow/gstdshowinterface.h:
* win32/common/libgstdshow.def:
* win32/vs6/libgstdshow.dsp:
Add a new gst library which allow to create internal Direct Show
graph (pipelines) to wrap Windows sources, decoders or encoders.
It includes a DirectShow fake source and sink and utility functions.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowaudiosrc.h:
* sys/dshowsrcwrapper/gstdshowsrcwrapper.c:
* sys/dshowsrcwrapper/gstdshowsrcwrapper.h:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.h:
* win32/vs6/libdshowsrcwrapper.dsp:
Add a new plugin to wrap DirectShow sources on Windows.
It gets data from any webcam, dv cam, micro. We could add
tv tunner card later.
Original commit message from CVS:
* docs/plugins/Makefile.am:
Also look for .m (objectivec) files.
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.args:
* sys/osxvideo/osxvideosink.m:
Add documentation for element and properties.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c: (gst_ddrawsurface_finalize),
(gst_directdraw_sink_buffer_alloc),
(gst_directdraw_sink_get_ddrawcaps),
(gst_directdraw_sink_surface_create):
Bunch of small fixes: remove static function that doesn't exist;
declare another one that does; printf format fix; use right macro
when specifying debug category; remove a bunch of unused variables;
#if 0 out an unused chunk of code (partially fixes#439914).
Original commit message from CVS:
* sys/glsink/glimagesink.c: (gst_glimage_sink_init_display):
Update the cached caps after opening the display so that we report
only the supported caps formats, not just the template caps.
Fixes: #439405
Original commit message from CVS:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Remove the event-loop-in-separate-thread modifications, because MacOSX
is $#@(*%$# ! For those wondering, the event handling needs to be done
in the main thread after all..
Original commit message from CVS:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Fix a stupid #if vs #ifdef bug. Should use the proper colorspace now.
Use a separate thread/task for the cocoa event_loop, else it wouldn't
stop.
Original commit message from CVS:
* configure.ac:
* sys/directdraw/Makefile.am:
* sys/directsound/Makefile.am:
Add DIRECTDRAW_CFLAGS and DIRECTSOUND_CFLAGS to Makefile.am; save
and restore the various flags in the directdraw/directsound
detection section. Apparently improves cross-compiling for win32
with mingw32 under some circumstances (#437539).
Original commit message from CVS:
* sys/osxvideo/osxvideosink.m:
Emit 'have-ns-view' message when working in embedded mode. The message
will contain a pointer to the newly created NSView.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Fix leaks when running a NSApp.
Accept any kind of resolutions.
Works in fullscreen. Can maximize.
Only thing left before being able to move this to -good is documentation
and embedded window support.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Handle display mode changes during playback.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Disable the cocoa event loop since it's a huge memory leak. Should only
matter if the sink isn't used within an NSApp (which has already got
a coca event loop).
Remove all unused code.
Original commit message from CVS:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Remove include of unused headers.
* sys/waveform/gstwaveformplugin.c:
* sys/waveform/gstwaveformsink.c:
* sys/waveform/gstwaveformsink.h:
* win32/vs6/libgstwaveform.dsp:
Add a new waveform plugin which includes an audio sink
element using the WaveForm win32 API.
* win32/MANIFEST:
Add the new project file form waveform plugin.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawplugin.c:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Prepare the plugin to move to good:
Remove unused/untested code (rendering to an extern surface,
yuv format rendering).Use GST_(DEBUG/*)_OBJECT macros
Rename all functions from gst_directdrawsink to gst_directdraw_sink.
Add gtk doc section
Fix a bug in gst_directdraw_sink_show_frame, memcpy line by line
respecting destination surface stride.
* sys/directsound/gstdirectsoundplugin.c:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Prepare the plugin to move to good:
Rename all functions from gst_directsoundsink to gst_directsound_sink.
Add gtk doc section
* win32/common/config.h.in:
* win32/MANIFEST:
Add config.h.in
Original commit message from CVS:
* Makefile.am:
Add win32 MANIFEST
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Clear unused code and add comments.
Remove yuv from template caps, it only supports RGB
actually.
Implement XOverlay interface and remove window and fullscreen
properties.
Add debug logs.
Test for blit capabilities to return only the current colorspace if
the hardware can't blit for one colorspace to another.
* sys/directsound/gstdirectsoundsink.c:
Add some debugs.
* win32/MANIFEST:
Add VS7 project files and solution.
* win32/vs6/gst_plugins_bad.dsw:
* win32/vs6/libgstdirectdraw.dsp:
* win32/vs6/libgstdirectsound.dsp:
* win32/vs6/libgstqtdemux.dsp:
Update project files.
Original commit message from CVS:
* configure.ac:
Check for an Objective C compiler
* sys/Makefile.am:
* sys/osxvideo/Makefile.am:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Port of osxvideo plugin to 0.10. Do NOT consider 100% stable !
Fixes#402470
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* configure.ac:
* sys/Makefile.am:
* sys/directsound/Makefile.am:
* sys/directsound/gstdirectsoundsink.c:
(gst_directsoundsink_reset):
Add directsoundsink to build and dist it, so it gets built when
compiling with MingW on win32 and the required headers and libraries
are available (fixes: #392638). Also simplify DirectDraw check a bit.
* tests/check/elements/.cvsignore:
Fix CVS ignore for neonhttpsrc test binary.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* configure.ac:
* sys/Makefile.am:
* sys/directdraw/Makefile.am:
Add directdrawsink to build and dist it, so it gets built when
compiling with MingW on win32 and the required headers and libraries
are available (fixes: #392313).
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdrawsink_center_rect), (gst_directdrawsink_show_frame),
(gst_directdrawsink_setup_ddraw),
(gst_directdrawsink_surface_create):
Comment out some unused things and fix some printf format issues in
order to avoid warnings when buildling with MingW (#392313).
Original commit message from CVS:
2006-11-17 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_tune):
Actually set the TONE parameter for DVB-S when we should.
Original commit message from CVS:
2006-11-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_set_property)
(gst_dvbsrc_create), (gst_dvbsrc_output_frontend_stats),
(gst_dvbsrc_tune), (gst_dvbsrc_set_pes_filters):
Rename set_pes_filter to set_pes_filters for consistency.
Do run-time pid filtering.
Original commit message from CVS:
2006-11-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (read_device):
Do not call output_frontend_stats from a method that does not
have the gstdvbsrc object.
This fixes the build, sorry guys!
Original commit message from CVS:
2006-11-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (read_device), (gst_dvbsrc_create),
(gst_dvbsrc_output_frontend_stats), (gst_dvbsrc_tune),
(gst_dvbsrc_set_pes_filter):
* sys/dvb/gstdvbsrc.h:
Force PAT to always be in the filter.
Try to continue reading after failing 10 times.
Original commit message from CVS:
* po/POTFILES.in:
add dvbsrc
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_class_init), (gst_dvbsrc_init),
(gst_dvbsrc_set_property), (gst_dvbsrc_get_property),
(gst_dvbsrc_open_frontend), (gst_dvbsrc_open_dvr),
(gst_dvbsrc_finalize), (read_device), (gst_dvbsrc_create),
(gst_dvbsrc_start), (gst_dvbsrc_frontend_status),
(gst_dvbsrc_tune), (gst_dvbsrc_unset_pes_filters),
(gst_dvbsrc_set_pes_filter):
* sys/dvb/gstdvbsrc.h:
adapter-prefix is a terrible name for a device, so replace it.
strerror should be used immediately after the syscall related to it.
Actually throw a reasonable GST_ELEMENT_ERROR if we fail to open
(pretty easy to trigger by opening the same device twice).
Use _OBJECT macros where it makes sense.
This element is going to need some work before it moves.
Original commit message from CVS:
Patch by: Sergey Scobich <sergey dot scobich at gmail com>
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdrawsink_window_thread),
(gst_directdrawsink_create_default_window):
* sys/directdraw/gstdirectdrawsink.h:
* sys/directsound/gstdirectsoundsink.c:
Wait until the window is created before using it; guard unistd.h
includes with HAVE_UNISTD_H. (#366523)
* win32/vs8/libgstdirectdraw.vcproj:
* win32/vs8/libgstdirectsound.vcproj:
Update project files.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (extract_initial_length_and_fourcc),
(gst_qtdemux_loop_state_header):
Printf format fixes.
* sys/dvb/gstdvbsrc.c:
Use "_stdint.h".
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/Makefile.am:
* sys/dvb/dvb-api/Makefile.am:
* sys/dvb/dvb-api/audio.h:
* sys/dvb/dvb-api/ca.h:
* sys/dvb/dvb-api/dmx.h:
* sys/dvb/dvb-api/frontend.h:
* sys/dvb/dvb-api/net.h:
* sys/dvb/dvb-api/osd.h:
* sys/dvb/dvb-api/version.h:
* sys/dvb/dvb-api/video.h:
Remove these files, not needed use system files.
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_set_property),
(gst_dvbsrc_create), (gst_dvbsrc_output_frontend_stats),
(gst_dvbsrc_tune):
Fix warnings, uint16_t etc. is in stdint.h.
Use system includes not our local ones.
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
* sys/Makefile.am:
Add dvb detection and allow dvbsrc to be built.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper):
comment out the properties that are already part of the tuner
interface.
Original commit message from CVS:
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_get_all_caps),
(gst_v4l2src_get_caps):
* sys/v4l2/v4l2_calls.c: (gst_v4l2_fill_lists):
Framerate can be 0/1 too.
Init framerate to 0/1 before querying it so that we can detect
devices that don't know about a framerate.
Add some more debugging info.
