Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
There's no need to warn if VOID_PENDING is not NONE here, as
long as the state is NULL it's ok, and that's checked immediately
above.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_set_locked_state), (gst_element_get_state_func),
(gst_element_change_state):
Handle INFO messages from the GST_ELEMENT_INFO macro as well.
Documentation updates.
Small code cleanups.
* gst/gstmessage.c: (gst_message_new_info),
(gst_message_parse_info):
* gst/gstmessage.h:
API: gst_message_new_info()
API: gst_message_parse_info()
Add INFO message create and parse code.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_add_pad):
* gst/gstghostpad.c: (gst_ghost_pad_new_full):
* gst/gstpad.c: (gst_pad_init):
Set pads to FLUSHING when they are created. Check, warn and fix when a
demuxer adds an inactive pad to itself when running. Fixes#339326.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_default_send_event), (gst_element_send_event),
(gst_element_default_query), (gst_element_query):
Expose default element send_event and query handling as vmethods that
subclasses can chain up to.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
add new API and fix the build
* gst/gstbin.c: (gst_bin_recalc_state):
* gst/gstelement.c: (gst_element_message_full),
(gst_element_get_state_func), (gst_element_set_state_func):
use new API and improve logging
* gst/gstutils.c: (gst_element_state_change_return_get_name):
* gst/gstutils.h:
API: add function to get StateChangereturn names to improve logs
Original commit message from CVS:
2006-10-06 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/gst.c: (gst_init_get_option_group):
Fix empty declaration and type mismatch.
* gst/gstbin.c: (gst_bin_change_state_func):
Fix type mismatch.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state),
(gst_element_change_state_func):
Fix type mismatches.
* gst/gstinfo.c: (gst_debug_compare_log_function_by_func),
(gst_debug_remove_log_function), (_gst_debug_nameof_funcptr):
Cast as appropriate.
* gst/gstobject.c: (gst_class_signal_connect):
Cast as appropriate. The function pointer parameter really
has the wrong type but would break API if we change it.
* gst/gstquery.c:
Fix redefinition of _FILE_OFFSET_BITS caused on Solaris wrt
order of including string.h.
* gst/gstutils.c: (gst_element_state_get_name):
Remove unreachable line.
* gst/gstxml.c: (gst_xml_parse_doc):
Fix type mismatch.
All these caught by Forte.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_post_message),
(gst_element_dispose):
Use _DEBUG_OBJECT some more.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Avoid typechecks.
* tools/gst-launch.c: (main):
If the toplevel element is not a GstPipeline, it must be put in a
pipeline so that a bus and clock is selected.
Original commit message from CVS:
* gst/gstbin.c:
Update documentation.
* gst/gstelement.c: (gst_element_class_init),
(gst_element_release_request_pad), (gst_element_set_clock),
(gst_element_get_index), (gst_element_add_pad),
(gst_element_remove_pad), (gst_element_get_random_pad),
(gst_element_send_event), (gst_element_get_query_types),
(gst_element_query), (gst_element_post_message),
(gst_element_message_full), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_save_thyself),
(gst_element_restore_thyself):
Documentation updates.
Rename last bit of the new-pad -> pad-added signal rename.
Fix the case where an element query would only work if the source
pad was linked.
Avoid some useless type checking in message handling.
* gst/gstevent.c:
* gst/gstevent.h:
* gst/gstutils.c:
Documentation updates.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads), (clear_caps),
(iterator_activate_fold_with_resync), (gst_element_pads_activate):
Clear the pad caps when the element shut down all of the pads and
is not streaming data that could modify the caps.
Fixes#352958.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstelement.c: (gst_element_get_bus):
* tests/check/gst/gstelement.c: (GST_START_TEST):
Check for NULL before _reffing the bus. Fixes#353122.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_element_pads_activate):
Better pad activation code: Reset the collect value too on resync.
Add some comments.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_pads_activate):
We need to deactivate src pads first and then sink pads.
The reason is the src pads might be blocking while holding the streaming
lock, so we need to deactivate them first so that deactivating the sink
pads doesn't block (since it will require the streaming lock).
Original commit message from CVS:
* gst/gstelement.c:
Clarify the use of _release_request_pad() and
_get_request_pad() a bit better.
* libs/gst/base/gstadapter.c: (gst_adapter_peek),
(gst_adapter_take_buffer):
Fix some doc and comment typos.
Original commit message from CVS:
* gst/gstelement.c:
use full enum names and preprend a '%' in docs strings to make recent
gtk-doc turn that into a link
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_init):
When we create a pipeline bus, initially create it in flushing mode.
Fixes leaks in at least one test, and makes a new pipeline work the
same as one that has gone to READY and then back to NULL.
* gst/gstelement.c:
Typo fix in docs.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_set_locked_state),
(gst_element_dispose):
Cleanup the error case.
* gst/gstobject.c: (gst_object_dispose):
print a critical when some object was disposed with
a parent, also revive the object since it might
crash the parent.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state):
Fixed#326576, been running this for quite some time with
no regressions at all.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_pads_activate):
When activating, do src pads first, then sink pads.
When de-activating, do sink pads first, then src pads.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_wait), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
No need to store the clock, the parent element class already
has it.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_add_func):
Updates for clock_set returning a gboolean
* gst/gstclock.c: (gst_clock_entry_new), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_class_init),
(gst_clock_init), (gst_clock_finalize),
(gst_clock_get_internal_time), (gst_clock_get_time),
(gst_clock_slave_callback), (gst_clock_set_master),
(gst_clock_get_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property),
(gst_clock_get_property):
* gst/gstclock.h:
Implement master/slave. When setting a clock as a slave, a
periodic timeout is scheduled to sample master and slave times.
Then the slave clock is recalibrated to match offset and rate
of the master clock.
Update logging a bit.
Add flag so that a clock can state that is cannot be slaved to
another clock.
* gst/gstelement.c: (gst_element_set_clock):
* gst/gstelement.h:
The set_clock returns a gboolean for when an element cannot
deal with the selected clock in the pipeline.
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_set_clock):
* gst/gstpipeline.h:
Handle the case where the selected clock cannot be set on
the pipeline.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_class_init),
(gst_net_client_clock_init), (gst_net_client_clock_finalize),
(gst_net_client_clock_set_property),
(gst_net_client_clock_get_property),
(gst_net_client_clock_observe_times):
* gst/net/gstnetclientclock.h:
Use regression code in GstClock parent, remove duplicated
functionality.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_set_base_time): Add debugging.
* gst/gstpipeline.c (gst_pipeline_set_new_stream_time): Document
using GST_CLOCK_TIME_NONE to disable base time management.
(do_pipeline_seek, gst_pipeline_change_state): Don't reset stream
time if it was NONE before.
(gst_pipeline_change_state): Only munge the base time if
stream_time != GST_CLOCK_TIME_NONE.
* check/gst/gstpipeline.c (test_base_time): Punt around the
problem of the probe not being called, because that's not the
issue I'm looking at. Add a check that setting stream_time to NONE
disables base time management.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.c:
* gst/gstelement.h:
Fix docs, move some STATE macros to private.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST):
Uncomment fixed check.
* docs/design/part-TODO.txt:
Updated TODO.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
If we are going to PLAYING, post the right pending state
when we post the intermediate paused message.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state):
Don't post state changes that were between the same state
and were not ASYNC.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
Added some more checks. Specifically the case where NO_PREROLL
elements are in the pipeline.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
Post READY->PAUSED state change messages too.
Fix bug where VOID was posted as pending state...
* gst/gstbin.c: (gst_bin_recalc_state):
use _element_continue_state() to continue the state change.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_commit_state), (gst_element_set_state_func),
(gst_element_change_state), (gst_element_change_state_func):
Lots of state change cleanups, assign the STATE_RETURN in
a new continue_state() function that also propagates the
last return value from a state change to the app.
Update some debug statements with proper category.
Original commit message from CVS:
* gst/gstbin.c:
Fix typo in docs.
* gst/gstelement.c: (gst_element_commit_state):
Remove unused value.
* gst/gstiterator.c:
Mention that the returned element is reffed in the docs.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_recalc_func),
(bin_bus_handler):
* gst/gstelement.c: (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_state_dirty), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_duration),
(gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Seriously, this is better than a previous commit as we only need
to notify the fact that an element changed state in a streaming
thread, marking the state of the parents dirty, hence the
STATE_DIRTY message instead of abusing a boolean in a STATE_CHANGE
message.
Original commit message from CVS:
* gst/gstbin.h:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_set_state), (gst_element_set_state_func):
* gst/gstelement.h:
Pending ABI changes.
GThreadPool in GstBinClass to monitor async state changes.
state_cookie in GstElement to detect concurrent gst/set state.
set_state is now virtual too in case a very complicated element
has to be constructed.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstbin.c: (bin_bus_handler):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_new_segment_start), (gst_message_new_segment_done),
(gst_message_new_duration), (gst_message_parse_state_changed),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done), (gst_message_parse_duration):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Make messages future proof.
state-change gets a flag if it was a message comming from the
streaming thread.
segment-start/stop can also be specified in other formats.
A message to notify an app that a pipeline changed playback
duration.
Also fix a GstMessage leak in -launch
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_intersect):
fix signedness issues in a (hopefully) correct way
* gst/gstelement.c: (gst_element_pads_activate):
some debugging
* gst/gstobject.c: (gst_object_set_parent):
some debugging
Original commit message from CVS:
* gst/gstelement.c: (gst_element_iterate_pad_list),
(gst_element_iterate_pads), (gst_element_iterate_src_pads),
(gst_element_iterate_sink_pads):
Use src/sink pads lists for the respective iterators instead
of filtering.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_init, gst_element_finalize):
Allocate and free the mutex properly.
* gst/gstelement.h (GST_STATE_UNLOCK_FULL, GST_STATE_LOCK_FULL):
New macros.
(GstElement): The state_lock is now recursive. Rebuild your
plugins, suckers. Old macros adapted.
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_change_state_func): Renamed from
gst_element_change_state, variable name changes.
(gst_element_change_state): Split out of gst_element_set_state in
preparation for the state change merge. Doesn't pay attention to
the 'transition' argument.
(gst_element_set_state): Updates, hopefully purely cosmetic.
(gst_element_sync_state_with_parent): MT-safety. Ported from the
state change patch.
(gst_element_get_state_func): Renamed from get_state, cosmetic
changes.
Original commit message from CVS:
* gst/gstbin.c: (is_eos), (update_degree), (gst_bin_change_state),
(gst_bin_dispose), (bin_bus_handler):
Fix typos, add comments.
Clear EOS list when going to PAUSED from any direction and do it
in a threadsafe way.
Get base time in a threadsafe way too.
Fix confusing debug in the change_state function.
Various other mall cleanups.
* gst/gstelement.c: (gst_element_post_message):
Fix very verbose bus posting code.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_set_property), (gst_pipeline_get_property),
(gst_pipeline_change_state):
Small ARG_ -> PROP_ cleanup
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstmessage.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST), (message_received):
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_lost_state):
* gst/gstmessage.c: (gst_message_new_state_changed),
(gst_message_parse_state_changed):
* gst/gstmessage.h:
* tools/gst-launch.c: (event_loop):
Added extra field to STATE_CHANGE message with the pending
state, which will be different from the new state soon.
Original commit message from CVS:
* gst/gst_private.h:
* gst/gstbus.c:
* gst/gstelement.c:
* gst/gstinfo.c:
* gst/gstpluginfeature.c:
widen the debug category in output to fit the biggest one we have
add a bus category and use it
play with the colors
fix up some categories
Original commit message from CVS:
* gst/gstelement.c: (gst_element_set_state),
(gst_element_change_state):
Small tweak, element in ASYNC remains ASYNC.
Original commit message from CVS:
* check/gst/gstbin.c:
* check/states/sinks.c:
fix tests for the new warning
* check/gst/gstpipeline.c:
add a test for pipeline and bus interaction
* gst/gstelement.c:
elements should be NULL if they get disposed; add a warning if not
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Add bus to bin.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(add_to_queue), (clear_queue), (reset_degree), (update_degree),
(find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state), (gst_bin_dispose):
A bin does not have a bus, it gets the bus from the parent.
* gst/gstelement.c: (gst_element_requires_clock),
(gst_element_provides_clock), (gst_element_is_indexable),
(gst_element_is_locked_state), (gst_element_change_state),
(gst_element_set_bus_func):
Small cleanups.
* gst/gstpipeline.c: (gst_pipeline_class_init),
(gst_pipeline_init), (gst_pipeline_provide_clock_func):
The pipeline provides a bus.
Original commit message from CVS:
* check/gst/gstbin.c: (test_children_state_change_order_flagged_sink),
(test_children_state_change_order_semi_sink), (gst_bin_suite):
Added test to check state change order in bins (can still be made
to fail here under heavy disk load; bails out with 'Push on pad
fakesink:sink0, but it was not activated in push mode').
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_change_state):
Fix state change order when there is only a semi sink (#316856)
* gst/gstbus.c: (gst_bus_class_init):
Use _class_peek_parent(), not _class_ref(); fix docs to say
'default main context' instead of 'mainloop' where that is
what's meant.
* gst/gstelement.c: (gst_element_commit_state),
(gst_element_set_state):
Fix typos in debug messages
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_send_event), (gst_base_sink_peer_query),
(gst_base_sink_query):
Prepare for more accurate position reporting and query
handling.
* gst/gstelement.c: (gst_element_send_event),
(gst_element_set_state):
Add some comment.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func):
Some more debug info.
* gst/gstelement.c: (gst_element_send_event):
Simplify send_event
* gst/gstelement.h:
Don't know how flags got broken.
* gst/gstquery.h:
Added new query.
Original commit message from CVS:
* docs/gst/tmpl/gstelement.sgml:
* docs/manual/appendix-quotes.xml:
add a quote
* gst/gstelement.c: (gst_element_set_state):
add some debug
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* configure.ac:
* examples/Makefile.am:
* examples/metadata/Makefile.am:
* examples/metadata/read-metadata.c: (message_loop),
(have_pad_handler), (make_pipeline), (print_tag), (main):
Add metadata reading example that loops over a list of filenames,
dumping any tags found.
* gst/gstbus.c: (gst_bus_dispose):
* gst/gstelement.c: (gst_element_dispose):
Release a few potentially-held references in dispose.
Original commit message from CVS:
* gst/gstbin.h:
removed ';' from the end of macro defs
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/tmpl/.cvsignore:
* gst/gstbus.h:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_set_state), (activate_pads),
(gst_element_save_thyself):
* gst/gstevent.c: (gst_event_new_newsegment):
* gst/gstevent.h:
* gst/gstiterator.c:
* gst/gstiterator.h:
* gst/gstpad.c:
* gst/gstprobe.h:
* gst/gstutils.c: (gst_pad_query_convert):
* gst/gstutils.h:
fixed parameter name mismatches between source, header and docs
added some more docs, resolved the last batch of unused elements in
docs (now someone needs to doc them)
Original commit message from CVS:
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/tmpl/.cvsignore:
* gst/gstbin.h:
* gst/gstbus.c:
* gst/gstelement.c:
* gst/gstevent.h:
added about 100 symbols from gstreamer-unused.txt to the right sections
fixed more broken comments
added GstBus to docs
Original commit message from CVS:
* gst/gstcaps.c: (gst_static_caps_get), (gst_caps_to_string):
Make _static_caps_get() refcounting sane.
* gst/gstelement.c: (gst_element_set_state):
Add g_return_val_if_fail() to protect against segfaults.
Original commit message from CVS:
2005-08-18 Andy Wingo <wingo@pobox.com>
Make sure that when a pipeline goes to PLAYING, that data has
actually hit the sink.
* check/states/sinks.c (test_sink): A sink that doesn't get any
data shouldn't return SUCCESS for going to either PLAYING or
PAUSED. Test also the return values on the way back down.
* gst/gstelement.c (gst_element_set_state): When changing the
state of an element currently changing state asynchronously, go to
lost-state after commiting the pending state. Makes future calls
to get_state continue to return ASYNC.
* gst/base/gstbasesink.c (gst_base_sink_change_state): Return
ASYNC when going to PLAYING if we still don't have preroll, as can
happen with live sources.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads):
On paused->ready, set pad->caps to NULL, as is the documented
behaviour in this state change. Fixes playback of series of
media files when visualization is enabled in Totem.
Original commit message from CVS:
* check/gst/gstghostpad.c: (GST_START_TEST), (gst_ghost_pad_suite):
Added some more tests for wrong hierarchy
* docs/design/part-overview.txt:
Some updates.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_dispose):
Cleanups.
* gst/gstelement.c: (gst_element_remove_pad), (gst_element_seek),
(gst_element_dispose):
Some more cleanups.
* gst/gstpad.c: (gst_pad_link_check_compatible_unlocked),
(gst_pad_link_check_hierarchy), (gst_pad_link_prepare),
(gst_pad_get_caps_unlocked), (gst_pad_accept_caps),
(gst_pad_set_caps), (gst_pad_send_event):
Check for correct hierarchy when linking pads. Moving to
strict requirement for ghostpads when linking elements in
different bins.
* gst/gstpad.h:
Clean ups. Added WRONG_HIERARCHY return value.
Original commit message from CVS:
Removed plugable schedulers.
Removed Scheduler/Manager from elements.
Removed gsttypes.h, rearranged includes.
Removed dependency pad<->element, element<>pipeline, and
various others, fix includes.
implement gst_pad_get_parent() with gst_object_get_parent()
Make GstTask sefcontained.
Fix _get_state() on GstBin, it did not return ASYNC with a 0
timeout.
Fix endless loop in iterator_fold_with_resync.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_get_times),
(gst_base_sink_do_sync), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Store and use discont values when syncing buffers as described
in design docs.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_push):
Push discont event when starting.
* gst/elements/gstidentity.c: (gst_identity_transform):
Small cleanups.
* gst/gstbin.c: (gst_bin_change_state):
Small cleanups in base_time distribution.
* gst/gstelement.c: (gst_element_set_base_time),
(gst_element_get_base_time), (gst_element_change_state):
* gst/gstelement.h:
Added methods for the base_time of the element.
Some MT fixes.
* gst/gstpipeline.c: (gst_pipeline_send_event),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time),
(gst_pipeline_get_last_stream_time):
* gst/gstpipeline.h:
MT fixes.
Handle seeking as described in design doc, remove stream_time
hack.
Cleanups clock and stream_time selection code. Added accessors
for the stream_time.
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST),
(gst_bin_suite):
add more things to check
* gst/gstbin.c: (gst_bin_change_state), (bin_bus_handler):
* gst/gstelement.c:
more debug
Original commit message from CVS:
* check/gst/gstbin.c: (START_TEST), (gst_bin_suite):
add test for state change message on a bin
* check/gst/gstelement.c: (START_TEST), (gst_element_suite):
add another test
* gst/gstbin.c: (gst_bin_init):
* gst/gstbus.c: (gst_bus_init), (gst_bus_post):
* gst/gstelement.c: (gst_element_post_message),
(gst_element_set_state):
* gst/gstelementfactory.c: (gst_element_factory_create):
* gst/gstmessage.c: (gst_message_new):
* gst/gstscheduler.c:
various debugging additions and cleanups
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_post), (gst_bus_have_pending),
(gst_bus_set_flushing), (gst_bus_pop), (gst_bus_peek),
(gst_bus_source_dispatch):
Add debugging messages.
Make internal methods static.
Handle the case where the bus is flushed in the handler.
* gst/gstelement.c: (gst_element_get_bus):
Fix refcount in _get_bus();
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_get_clock_func):
Clock refcounting fixes.
Handle the case where preroll timed out more gracefully.
* gst/gstsystemclock.c: (gst_system_clock_dispose):
Clean up the internal thread in dispose. This is needed
for subclasses that actually get disposed.
* gst/schedulers/threadscheduler.c:
(gst_thread_scheduler_class_init), (gst_thread_scheduler_func),
(gst_thread_scheduler_dispose):
Free thread pool in dispose.
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_set_state):
* gst/gstelement.h:
* gst/gstmessage.c: (gst_message_parse_error),
(gst_message_parse_warning):
Keep track of current target state while performing a state
change so that subclasses can do something interesting.
Fix parsing of warning/error messages when GError is NULL.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_set_state), (gst_element_change_state):
When the state did not change, also report NO_PREROLL
when it matters.
Original commit message from CVS:
2005-06-23 Jan Schmidt <thaytan@mad.scientist.com>
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
Don't restart typefinding on a discont.
* gst/gstelement.c: (gst_element_set_state):
Debug spelling fix.
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_send_event):
Allow changing mode of an active pad.
Debug output fixes.
* gst/registries/gstlibxmlregistry.c: (load_feature):
Don't cast a static pad template to a normal pad template.
Original commit message from CVS:
Added support for live sources and other elements that
cannot do preroll.
Updated design docs, added live-source design doc.
Implemented live source functionality in basesrc
Fix error condition in _bin_get_state()
Implement live source handling in -launch.
Added check for live sources.
Fixed case in GstBin where elements were changed state
multiple times.
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_init),
(gst_element_pads_activate), (gst_element_change_state):
Slicker pad activation code.
Original commit message from CVS:
2005-05-26 Andy Wingo <wingo@pobox.com>
* gst/gstminiobject.c (gst_value_mini_object_collect): Use
gst_value_set_mini_object so as to add a ref on the object (which
will be removed when the value is unset).
* gst/elements/gstfakesink.c (gst_fakesink_class_init): Fix signal
arg type in ::handoff.
* gst/gstelement.c (gst_element_change_state): Also deactivate
pads in READY->NULL, just in case the element didn't make it to
PAUSED. Wingo tested, Wim approved.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_init),
(gst_basesink_activate):
* gst/base/gstbasesrc.c: (gst_basesrc_unlock),
(gst_basesrc_is_seekable):
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(bin_element_is_sink), (gst_bin_change_state):
* gst/gstelement.c: (gst_element_add_pad), (gst_element_query):
* gst/gstelement.h:
Identify sinks by their flag to avoid overly complicated
checks (fow now).
Do state changes even for elements not reachable from the
sinks.
BaseSink is a sink now :)
Some more debugging info in the basesrc.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_add_pad), (gst_element_query):
* gst/gstutils.c: (gst_element_get_compatible_pad_template),
(gst_element_link_pads), (gst_element_query_position),
(gst_element_query_convert), (intersect_caps_func),
(gst_pad_query_position), (gst_pad_query_convert):
Fix refcounting in utils function.
No point in trying to activate a pad when it's added, it could
be added from the state change function and then we deadlock, the
element has to decide what to do.
Original commit message from CVS:
Remove old query functions. Ported old code.
Added position/convert helper functions to gstutils.
Reordered gstpad.c code, grouping relevant things.
Remove gst_message_new(), always need to speficy a specific
message.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
Original commit message from CVS:
Added state change code.
Added/updated docs.
Added sink base class, make fakesink extend the base class.
Small cleanups in GstPipeline.
Original commit message from CVS:
Next big merge.
Added GstBus for mainloop integration.
Added GstMessage for sending notifications on the bus.
Added GstTask as an abstraction for pipeline entry points.
Removed GstThread.
Removed Schedulers.
Simplified GstQueue for multithreaded core.
Made _link threadsafe, removed old capsnego.
Added STREAM_LOCK and PREROLL_LOCK in GstPad.
Added pad blocking functions.
Reworked scheduling functions in GstPad to prepare for
scheduling updates soon.
Moved events out of data stream.
Simplified GstEvent types.
Added return values to push/pull.
Removed clocking from GstElement.
Added prototypes for state change function for next merge.
Removed iterate from bins and state change management.
Fixed some elements, disabled others for now.
Fixed -inspect and -launch.
Added check for GstBus.
Original commit message from CVS:
Added GstBin test.
Added GstSystemClock test.
Implemented clock distribution code in GstBin.
Implemented iterate sinks method for future use.
Rearranged gstelement.h
Fix GstIterator comparison bug.
Moved some code to GstPipeline, mostly clocking related.
Original commit message from CVS:
Remove threadsafe properties. Fix elements because GObject
complains when installing a property before declaring a
set/get_property handler.
Rearrange gstelement.h file, use STATE macros for state locks.
Free mutexes in the finalize method instead of dispose.
Original commit message from CVS:
First THREADED backport attempt, focusing on adding locks and
making sure the API is threadsafe. Needs more work. More docs
follow this week.
Original commit message from CVS:
2005-02-04 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_get_compatible_pad_template): Fix
the debugging on whether the caps are compatible.
Original commit message from CVS:
* docs/pwg/advanced-types.xml:
Fix description for buffer-frames=0.
* docs/gst/tmpl/gstbin.sgml:
* gst/gstbin.c: (gst_bin_child_state_change_func),
(gst_bin_change_state), (gst_bin_change_state_norecurse):
* gst/gstbin.h:
* testsuite/threads/Makefile.am:
* testsuite/threads/threadi.c: (cb_timeout), (cb_quit), (cb_eos),
(cb_state), (cb_play), (main):
Fix non-recursive state changes to *really* change the state
of the object, and not just call parent_class->state_change.
Fix a lot of lockups caused by this. Fixes#132775. Add test
for the problem. Also enable test to show #142588 (fixed).
* gst/gstthread.c: (gst_thread_change_state),
(gst_thread_child_state_change):
Don't exit the thread if we go to NULL and are inside thread
context. Instead, return control to the main thread context
and exit from there.
* gst/gstelement.c: (gst_element_disable_threadsafe_properties):
Don't unset virtual functions, since those may still be used.
That's not necessarily correct, but suffices for now.
* configure.ac:
* testsuite/Makefile.am:
* testsuite/pad/Makefile.am:
* testsuite/pad/chainnopull.c: (gst_test_sink_class_init),
(gst_test_sink_base_init), (gst_test_sink_chain),
(gst_test_sink_init), (main):
* testsuite/pad/getnopush.c: (gst_test_src_class_init),
(gst_test_src_base_init), (gst_test_src_get), (gst_test_src_init),
(main):
* testsuite/pad/link.c: (gst_test_element_class_init),
(gst_test_element_base_init), (gst_test_src_get),
(gst_test_src_loop), (gst_test_src_init), (gst_test_filter_chain),
(gst_test_filter_loop), (gst_test_filter_init),
(gst_test_sink_chain), (gst_test_sink_loop), (gst_test_sink_init),
(cb_error), (main):
Add tests to show #150546. Pass, but should fail (currently
disabled from the testsuite).
* gst/gstscheduler.c: (gst_scheduler_dispose):
Dereference child schedulers on dispose (#94464).
* testsuite/bytestream/filepadsink.c: (gst_fp_sink_init):
Fix typo.
* testsuite/threads/thread.c: (main):
Add more debug.
Original commit message from CVS:
* docs/pwg/advanced-types.xml:
* docs/random/mimetypes:
Add documentation on libsndfile types (#163309), by Steve Baker
<steve@stevebaker.org>.
* gst/gstelement.c: (gst_element_release_request_pad):
If an element has no explicit function, just remove the pad.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_link_many):
fix up g_return_if_fail's
* po/LINGUAS:
* po/de.po:
add German translation, that was somehow not included
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/gstelement.c: (gst_element_error_full):
Use g_error_new_literal because error text may have
percentage signs in it. Fixes#160019.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_negotiate_pads):
simplify
* gst/gstvalue.c: (gst_string_wrap), (gst_string_unwrap),
(gst_value_serialize_string), (gst_value_deserialize_string):
add unwrapping of previously wrapped strings. Fix bug in wrapping
while at it.
* testsuite/caps/value_serialize.c: (test1),
(test_string_serialization), (test_string_deserialization), (main):
add tests for string (de)serialization
Original commit message from CVS:
* gst/gstelement.c: (gst_element_change_state):
Well, actually, I was about to remove this insane assert when
I noticed Wim already did that. A warning is nice so we can
fix actual ugs (using --g-fatal-warnings and backtraces), so
I added that instead.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_threadsafe_properties_pre_run),
(gst_element_threadsafe_properties_post_run),
(gst_element_set_state), (gst_element_change_state):
Added extra refcounting around various places.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_link_pads_filtered):
use correct sinkpad, if only sinkpad is specified, but not srcpad
(fixes#147889)
* gst/gstelement.c: (gst_element_set_state_func),
(gst_element_change_state): ref/unref the element, signal handlers
could get rid of the element otherwise
Original commit message from CVS:
* gst/gstelement.h:
Don't GST_ERROR_OBJECT smpty strings - Solaris doesn't like NULL
strings.
* gst/gstelement.c (gst_element_class_init):
GError's are boxed, not objects
* gst/gstmarshal.list:
update list for the fixed error signal
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_set_state), (gst_element_set_state_func):
virutalize gst_element_set_state, use set_state member in class
struct that was already added in 0.7 for this.
* gst/gstbin.c: (gst_bin_foreach), (set_kid_state_func),
(gst_bin_change_state):
make gst_bin_foreach works similar to other foreach functions, plug
memleaks in it. Make functions using it work with the new approach.
Document gst_bin_foreach, so it can be exported if we want to
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_state):
use virtualized set_state to make set_state on bins set the state of
all its children.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_set_time_delay):
add failure check
* gst/gstinfo.h:
put brackets around macro arguments of GST_TIME_ARGS, add note to
move it to correct header in 0.9
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_init):
whoops, store the signal id correctly
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_chain_wrapper):
detect infinfinfinfinfinf^Cinite loops in chain wrapper when the
chain function isn't linked
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_no_more_pads):
* gst/gstelement.h:
add gst_element_no_more_pads and the "no-more-pads" signal
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_filesrc_get),
(gst_filesrc_change_state), (gst_filesrc_srcpad_event):
* gst/elements/gstfilesrc.h:
send NEW_MEDIA events correctly
* gst/elements/gsttypefindelement.c: (start_typefinding),
(gst_type_find_element_handle_event):
restart typefinding when we get a NEW_MEDIA event
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_change_state),
(gst_bin_dispose):
don't die when someone removes elements in callbacks
* gst/gstelement.c: (gst_element_change_state):
improve debugging
* gst/gstpad.c: (gst_pad_pull), (gst_pad_call_chain_function):
we need a NEW_MEDIA event to engage a link
* gst/gsttrace.c: (gst_trace_new), (gst_alloc_trace_set_flags_all):
don't g_print debugging stuff
* testsuite/caps/simplify.c: (check_caps):
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
simplify
* gst/gstpad.c: (gst_pad_call_chain_function):
don't create loads of events due to bad macro usage
Original commit message from CVS:
* gst/autoplug/gstspider.c: (gst_spider_link_add):
don't ref the element, adding already reffed it. And we didn't unref
it later anyway... (huge memleak when you used many spider elements)
* gst/gstelement.c: (gst_element_base_class_finalize):
* gst/gstelementfactory.c: (gst_element_factory_cleanup),
(gst_element_register):
* gst/gsturi.c: (gst_element_make_from_uri):
use gst_object_(un)ref instead of g_object(un)ref
Original commit message from CVS:
* gst/gstelement.h:
* gst/gstelement.c (gst_element_set_time_delay): New function for
setting element time taking into account a hardware buffering
delay.
(gst_element_set_time): Now just an invocation of
gst_element_set_time_delay.
* gst/gstclock.h:
* gst/gstclock.c (gst_clock_get_event_time_delay): New function
allowing to set event times in the future.
(gst_clock_get_event_time): Now just an invocation of
gst_clock_get_event_time_delay.
Original commit message from CVS:
* gst/gstelement.c:
add documentation about a gobject quirk where the object hasn't the
correct class pointer set on initialization
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_src_wrapper):
make sure to not run into an infinite loop
Original commit message from CVS:
* gst/gstelement.c:
add documentation note about gst_element_found_tags_for_pad not
being usable in getfunctions. (see #137042)
Original commit message from CVS:
* gst/gstcaps.h: jdahlin, what are you smoking? We can't just
change API right now! Readd gst_caps_is_simple() macro.
* gst/gstelement.c: (gst_element_base_class_finalize): Fix
uninitialized variable. I'd bet this caused crashes.
* gst/gstinfo.c: (gst_debug_print_object): Fix 64-bit cleanliness.
Original commit message from CVS:
2004-03-07 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (gst_bin_remove): Debugging fixes.
* gst/schedulers/gstoptimalscheduler.c (destroy_group): Assert
there are no links to other groups when a group is destroyed.
(gst_opt_scheduler_pad_unlink): If the unlink means an element is
removed from a group, make sure the link count to elements linked
to other pads is appropriately decremented. This really fixes
#135672.
The 1.60->1.61 patch has been reapplied in light of this fix.
* gst/gstelement.c (gst_element_dispose): Really protect against
multiple invocations this time.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_error_full):
revert recent recursive state changing commit - messing with other
elements' states is evil and should be done by apps only.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_compatible_pad_template):
check for empty intersection instead of NULL caps
(gst_element_get_compatible_pad_filtered):
remove old workaround that is only a bug nowadays
Original commit message from CVS:
* gst/gstelement.c: (gst_element_error_full):
make elements try to recursively change state to PAUSED on all
parents after an error to suppress ensuing warnings
* gst/parse/grammar.y:
make it check if it was able to sync the state, and throw an error
if not, so stuff like
oggdemux ! vorbisdec ! osssink gets caught
Original commit message from CVS:
2004-02-24 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_dispose): Protect against multiple
invocations.
* gst/schedulers/gstoptimalscheduler.c
I added a mess of prototypes at the top of the file by way of
documentation. Some of the operations on chains and groups were
re-organized.
(create_group): Added a type argument so if the group is enabled,
the setup_group_scheduler knows what to do.
(group_elements): Added a type argument here, too, to be passed on
to create_group.
(group_element_set_enabled): If an unlinked PLAYING element is
added to a bin, we have to create a new group to hold the element,
and this function will be called before the group is added to the
chain. Thus we have a valid case for group->chain==NULL. Instead
of calling chain_group_set_enabled, just set the flag on the group
(the chain's status will be set when the group is added to it).
(gst_opt_scheduler_state_transition, chain_group_set_enabled):
Setup the group scheduler when the group is enabled, not
specifically when an element goes PAUSED->PLAYING. This means
PLAYING elements can be added, linked, and scheduled into a
PLAYING pipeline, as was intended.
(add_to_group): Don't ref the group twice. I don't know when this
double-ref got in here. Removing it has the potential to cause
segfaults if other parts of the scheduler are buggy. If you find
that the scheduler is segfaulting for you, put in an extra ref
here and see if that hacks over the underlying issue. Of course,
then find out what code is unreffing a group it doesn't own...
(create_group): Make the extra refcount floating, and remove it
after adding the element. This means that...
(unref_group): Destroy when the refcount reaches 0, not 1, like
every other refcounted object in the known universe.
(remove_from_group): When a group becomes empty, set it to be not
active, and remove it from its chain. Don't unref it again,
there's no floating reference any more.
(destroy_group): We have to remove the group from the chain in
remove_from_group (rather than here) to break refcounting cycles
(the chain always has a ref on the group). So assert that
group->chain==NULL.
(ref_group_by_count): Removed, it was commented out anyway.
(merge_chains): Use the remove_from_chain and add_to_chain
primitives to do the reparenting, instead of rolling our own
implementation.
(add_to_chain): The first non-disabled group in the chain's group
list will be the entry point for the chain. Because buffers can
accumulate in loop elements' peer bufpens, we preferentially
schedule loop groups before get groups to avoid unnecessary
execution of get-based groups when the bufpens are already full.
(gst_opt_scheduler_schedule_run_queue): Debug fixes.
(get_group_schedule_function): Ditto.
(loop_group_schedule_function): Ditto.
(gst_opt_scheduler_loop_wrapper): Ditto.
(gst_opt_scheduler_iterate): Ditto.
I understand the opt scheduler now, yippee!
* gst/gstpad.c: All throughout, added FIXMEs to look at for 0.9.
(gst_pad_get_name, gst_pad_set_chain_function)
(gst_pad_set_get_function, gst_pad_set_event_function)
(gst_pad_set_event_mask_function, gst_pad_get_event_masks)
(gst_pad_get_event_masks_default, gst_pad_set_convert_function)
(gst_pad_set_query_function, gst_pad_get_query_types)
(gst_pad_get_query_types_default)
(gst_pad_set_internal_link_function)
(gst_pad_set_formats_function, gst_pad_set_link_function)
(gst_pad_set_fixate_function, gst_pad_set_getcaps_function)
(gst_pad_set_bufferalloc_function, gst_pad_unlink)
(gst_pad_renegotiate, gst_pad_set_parent, gst_pad_get_parent)
(gst_pad_add_ghost_pad, gst_pad_proxy_getcaps)
(gst_pad_proxy_pad_link, gst_pad_proxy_fixate)
(gst_pad_get_pad_template_caps, gst_pad_check_compatibility)
(gst_pad_get_peer, gst_pad_get_allowed_caps)
(gst_pad_alloc_buffer, gst_pad_push, gst_pad_pull)
(gst_pad_selectv, gst_pad_select, gst_pad_template_get_caps)
(gst_pad_event_default_dispatch, gst_pad_event_default)
(gst_pad_dispatcher, gst_pad_send_event, gst_pad_convert_default)
(gst_pad_convert, gst_pad_query_default, gst_pad_query)
(gst_pad_get_formats_default, gst_pad_get_formats): Better
argument checks, and some doc fixes.
(gst_pad_custom_new_from_template): Um, does anyone
use these functions? Actually make a custom pad instead of a
normal one.
(gst_pad_try_set_caps): Transpose some checks.
(gst_pad_try_set_caps_nonfixed): Same, and use a macro to check if
the pad is in negotiation.
(gst_pad_try_relink_filtered): Use pad_link_prepare.
* gst/gstelement.c: Remove prototypes also defined in gstclock.h.
* gst/gstelement.h:
* gst/gstclock.h: Un-deprecate the old clocking API, as discussed
on the list.
Original commit message from CVS:
2004-02-20 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c:
* gst/gstbuffer.c:
* gst/gstplugin.c:
* gst/registries/gstxmlregistry.c:
* gst/schedulers/gstoptimalscheduler.c: Debugging tweaks.
* gst/gstelement.c (gst_element_set_scheduler): Debugging fixes.
(gst_element_add_pad): DEBUG->INFO, some fixes.
(gst_element_get_compatible_pad_template): Just see if the
templates' caps intersect, not if one is a strict subset of the
other. This conforms more to what gst_pad_link_intersect() does.
(gst_element_class_add_pad_template): Don't memcpy the pad
template, just ref it.
(gst_element_get_compatible_pad_filtered): Clean up debug messages
* gst/gstpad.c (gst_pad_can_link_filtered): Debug a true result.
(gst_pad_link_filtered): Debug changes.
(gst_pad_link_prepare): New function, consolidated from
can_link_filtered and link_filtered.
* gst/parse/grammar.y (gst_parse_perform_link): Made INFO output
look more like that of the functions in gstelement.c
* gst/gstinfo.c (gst_debug_print_object): Put a space before the
object, and return the empty string if object is NULL.
* gst/parse/parse.l: Remove trailing newlines when calling PRINT.
* gst/parse/grammar.y (YYFPRINTF): Log bison debugging info via
LOG, not DEBUG. We still get flex info on debug.
* gst/registries/gstxmlregistry.c (gst_xml_registry_load): Make
debug string more verbose.
(plugin_times_older_than): DEBUG->LOG.
Original commit message from CVS:
* gst/elements/gstmultifilesrc.c: (gst_multifilesrc_class_init):
Use G_TYPE_STRING in signal prototype instead of G_TYPE_POINTER.
* gst/elements/gsttypefind.c: (gst_type_find_element_class_init):
Use GST_TYPE_CAPS in signal prototype.
* gst/gstcaps.c: (_gst_caps_initialize), (gst_caps_copy_conditional):
Convert GST_TYPE_CAPS to boxed.
* gst/gstelement.c: (gst_element_class_init):
Use GST_TYPE_TAG_LIST in signal prototype.
* gst/gstindex.c: (gst_index_class_init):
* gst/gstindex.h:
Add GST_TYPE_INDEX_ENTRY type.
* gst/gstmarshal.list:
Add necessary marshal types.
* gst/gstpad.c: (gst_real_pad_class_init),
(_gst_real_pad_fixate_accumulator), (gst_pad_link_fixate),
(gst_pad_recover_caps_error):
Use GST_TYPE_CAPS in signal prototypes. Fix some debugging strings.
* gst/gststructure.c: (_gst_structure_initialize),
(gst_structure_copy), (_gst_structure_copy_conditional):
* gst/gststructure.h:
Convert GST_TYPE_STRUCTURE to boxed.
* gst/gsttag.c: (gst_tag_list_get_type):
* gst/gsttag.h:
Add GST_TYPE_TAG_LIST type.
Original commit message from CVS:
2004-02-10 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_custom_new): Add a FIXME, this is a hacky
way to do inheritance.
(gst_pad_get_event_masks, gst_pad_get_event_masks_default)
(gst_pad_get_query_types, gst_pad_get_query_types_default):
Routine docs.
(gst_pad_set_link_function, gst_pad_set_fixate_function)
(gst_pad_set_getcaps_function): Doc from Dave's negotation random
doc.
(gst_pad_unlink, gst_pad_is_linked): Docs.
(gst_pad_renegotiate): A brief description of capsnego.
(gst_pad_try_set_caps): Document.
(gst_pad_try_set_caps_nonfixed): Document.
(gst_pad_can_link_filtered, gst_pad_link_filtered): Doc fixes.
(gst_pad_set_parent): Deprecated (although not out of the API).
(gst_pad_get_parent): Deprecated, although many plugins use this.
(gst_pad_add_ghost_pad, gst_pad_remove_ghost_pad): Doc that these
are private and will go away in 0.9.
(gst_pad_perform_negotiate): Doc.
(gst_pad_link_unnegotiate): I think this is meant to be static.
(gst_pad_get_negotiated_caps, gst_pad_get_pad_template_caps)
(gst_pad_template_get_caps_by_name, gst_pad_check_compatibility)
(gst_pad_get_peer): Doc updates.
(gst_pad_caps_change_notify): Doc.
(gst_pad_alloc_buffer, gst_pad_push, gst_static_pad_template_get)
(gst_ghost_pad_new): Doc fixes.
* gst/gstobject.c (gst_object_get_parent, gst_object_unparent)
(gst_object_check_uniqueness):
* gst/gstelement.c (gst_element_add_pad)
(gst_element_add_ghost_pad, gst_element_remove_pad)
(gst_element_remove_ghost_pad, gst_element_get_pad)
(gst_element_get_static_pad, gst_element_get_pad_list)
(gst_element_class_get_pad_template_list)
(gst_element_class_get_pad_template): Work on the docs.
(gst_element_get_pad_template_list): Uses the class method.
(gst_element_get_compatible_pad_template): Docs, and consolidate
some test conditions.
(gst_element_get_pad_from_template): New static function.
(gst_element_request_compatible_pad): Docs, and work with
non-request compatible templates.
(gst_element_get_compatible_pad_filtered): Docs and remove
redundant checks.
(gst_element_get_compatible_pad, gst_element_link_pads_filtered)
(gst_element_link_filtered, gst_element_link_many)
(gst_element_link, gst_element_link_pads)
(gst_element_unlink_many): Docs.
2004-02-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (_gst_real_pad_fixate_accumulator):
s/pointer/boxed/.
* gst/gstmarshal.list (VOID:BOXED, BOXED:BOXED): New marshallers.
* gst/gstpad.c (gst_real_pad_class_init): Use a BOXED:BOXED
marshaller for ::fixate, and VOID:BOXED for ::caps-nego-failed,
with the type=GST_TYPE_CAPS. This allows language bindings to know
what kind of data they're dealing with.
* gst/gstcaps.c (_gst_caps_value_init): GBoxed values initialize
to NULL when g_value_init is called. GstCaps, which rolls its own
type implementation, now does the same instead of allocating empty
caps.
(_gst_caps_initialize, _gst_caps_collect_value,
_gst_caps_lcopy_value): Provide collect_value and lcopy_value type
table methods. This allows G_VALUE_COLLECT to work.
2004-02-05 Andy Wingo <wingo@pobox.com>
* configure.ac:
* testsuite/Makefile.am (SUBDIRS):
* testsuite/ghostpads/Makefile.am:
* testsuite/ghostpads/ghostpads.c: A new test for ghost pads.
* gst/gstpad.c (gst_pad_add_ghost_pad, gst_pad_remove_ghost_pad):
These two routines are the only ones that set
GST_GPAD_REALPAD(gpad), the ghost pad list, and the ghost pad's
pad template. They should be made static, depending on ABI needs.
(gst_real_pad_dispose): Handle the case of ghost pads without a
parent. Assert after dealing with ghost pads that the ghost pad
list is empty.
(gst_ghost_pad_class_init): New property added, ::real-pad. Can be
set after creation.
(gst_ghost_pad_dispose): Set ::real-pad to NULL.
(gst_ghost_pad_set_property, gst_ghost_pad_get_property): New
functions. set_property will call add_ghost_pad/remove_ghost_pad
as appropriate.
(gst_ghost_pad_new): All the work is offloaded to g_object_new.
* gst/gstelement.c (gst_element_add_pad): Handle ghost pads as well.
(gst_element_add_ghost_pad): Remove code duplicated from _add_pad.
(gst_element_remove_pad): Handle ghost pads as well.
(gst_element_remove_ghost_pad): Deprecated (could be removed,
depending on API-stability needs).
2004-02-05 Andy Wingo <wingo@pobox.com>
* gst/gstbin.[ch]: (gst_bin_get_by_interface): GTypes are scalars,
of course they're const
Original commit message from CVS:
Trying to fix the mess that I made with the two previous commits.
First commit, doing something wrong (fixing comparisons of signed and unsigned).
Second commit, trying to revert the previous, but changing other things and
reverting unrelated work of other people.
And this third, hopefully fixes it.
Original commit message from CVS:
2004-02-06 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst/gstcaps.h:
* gst/gstelement.c: (gst_element_base_class_init),
(gst_element_class_set_details), (gst_element_clear_pad_caps):
* gst/gstpad.c: (gst_pad_link_intersect), (gst_pad_link_fixate),
(gst_pad_try_set_caps), (gst_pad_can_link_filtered),
(gst_real_pad_dispose):
* gst/gststructure.c: (gst_structure_free),
(gst_structure_from_string):
put reverted patch back in
* gst/gstelement.c: (gst_element_remove_pad):
free explicit caps if they're set
* gst/gstpad.c: (_gst_pad_default_fixate_func):
copy the structure when fixating
Original commit message from CVS:
2004-02-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (_gst_real_pad_fixate_accumulator):
s/pointer/boxed/.
* gst/gstmarshal.list (VOID:BOXED, BOXED:BOXED): New marshallers.
* gst/gstpad.c (gst_real_pad_class_init): Use a BOXED:BOXED
marshaller for ::fixate, and VOID:BOXED for ::caps-nego-failed,
with the type=GST_TYPE_CAPS. This allows language bindings to know
what kind of data they're dealing with.
* gst/gstcaps.c (_gst_caps_value_init): GBoxed values initialize
to NULL when g_value_init is called. GstCaps, which rolls its own
type implementation, now does the same instead of allocating empty
caps.
(_gst_caps_initialize, _gst_caps_collect_value,
_gst_caps_lcopy_value): Provide collect_value and lcopy_value type
table methods. This allows G_VALUE_COLLECT to work.
2004-02-05 Andy Wingo <wingo@pobox.com>
* configure.ac:
* testsuite/Makefile.am (SUBDIRS):
* testsuite/ghostpads/Makefile.am:
* testsuite/ghostpads/ghostpads.c: A new test for ghost pads.
* gst/gstpad.c (gst_pad_add_ghost_pad, gst_pad_remove_ghost_pad):
These two routines are the only ones that set
GST_GPAD_REALPAD(gpad), the ghost pad list, and the ghost pad's
pad template. They should be made static, depending on ABI needs.
(gst_real_pad_dispose): Handle the case of ghost pads without a
parent. Assert after dealing with ghost pads that the ghost pad
list is empty.
(gst_ghost_pad_class_init): New property added, ::real-pad. Can be
set after creation.
(gst_ghost_pad_dispose): Set ::real-pad to NULL.
(gst_ghost_pad_set_property, gst_ghost_pad_get_property): New
functions. set_property will call add_ghost_pad/remove_ghost_pad
as appropriate.
(gst_ghost_pad_new): All the work is offloaded to g_object_new.
* gst/gstelement.c (gst_element_add_pad): Handle ghost pads as well.
(gst_element_add_ghost_pad): Remove code duplicated from _add_pad.
(gst_element_remove_pad): Handle ghost pads as well.
(gst_element_remove_ghost_pad): Deprecated (could be removed,
depending on API-stability needs).
2004-02-05 Andy Wingo <wingo@pobox.com>
* gst/gstbin.[ch]: (gst_bin_get_by_interface): GTypes are scalars,
of course they're const
Original commit message from CVS:
* gst/gstelement.c: (gst_element_clear_pad_caps): Make sure we have
a GstRealPad before accessing its structure members.
Original commit message from CVS:
2004-01-30 Laurent Vivier <Laurent.Vivier@bull.net>
reviewed by Benjamin Otte
parts of the patch submitted in bug #113913
* configure.ac:
use AC_C_INLINE. Use = instead of == with test
* examples/plugins/example.c:
* gst/autoplug/gstspideridentity.c:
* gst/elements/gstfdsrc.c:
* gst/elements/gstfilesrc.c:
* gst/elements/gstidentity.c:
* gst/elements/gstmultidisksrc.c:
* gst/elements/gststatistics.c:
* gst/gstelement.c:
* gst/gstobject.c:
* gst/gstpad.c:
* gst/gstpipeline.c:
* gst/gstthread.c:
don't end enums with a comma
* gst/gstindex.c: (gst_index_compare_func):
do explicit casting to gint
* gst/gsttrace.c: (gst_trace_text_flush):
#define strsize as a macro
Original commit message from CVS:
2004-01-29 Benjamin Otte <in7y118@public.uni-hamburg.de>
* docs/random/mimetypes:
update docs for audio/x-raw-float. Add "buffer-frames=0 means
undefined"
* gst/elements/gstfilesrc.c: (gst_filesrc_set_location):
make it only work in NULL.
* gst/gstcaps.c:
don't posion NULL caps
* gst/gstelement.c: (gst_element_set_time):
add debugging statement
* gst/gstelement.c: (gst_element_emit_found_tag),
(gst_element_found_tag_func), (gst_element_found_tags):
* gst/gstelement.h:
These functions take const taglists
* gst/gstpad.c: (gst_pad_proxy_getcaps):
fix memleak
* gst/gstpad.c: (gst_pad_event_default):
make more effort on handling discont and clocks, g_warn if everything
fails
* gst/gststructure.c: (gst_structure_remove_fields),
(gst_structure_remove_fields_valist):
* gst/gststructure.h:
add gst_structure_remove_fields(_valist)
* gst/gsttag.c:
fix doc glitch
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_compatible_pad_filtered),
(gst_element_link_pads_filtered): Use GST_PAD_ macros instead
of GST_RPAD_, since we don't know if it's a real or ghost pad.
Original commit message from CVS:
2004-01-15 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst/autoplug/gstspideridentity.c:
(gst_spider_identity_sink_loop_type_finding):
break infinite loop by just returning instead of looping
* gst/gstclock.c: (gst_clock_class_init), (gst_clock_set_property):
set event time difference correctly. Set it to 1 second instead
of 100ms to be more tolerant
* gst/gstelement.c: (gst_element_set_time):
add debugging output
Original commit message from CVS:
2004-01-13 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst/gstclock.c: (gst_clock_class_init), (gst_clock_init),
(gst_clock_set_speed), (gst_clock_set_active),
(gst_clock_is_active), (gst_clock_reset),
(gst_clock_handle_discont):
* gst/gstclock.h:
deprecate old interface and disable functions that aren't in use
anymore.
* gst/gstelement.h:
* gst/gstelement.c: (gst_element_get_time), (gst_element_wait),
(gst_element_set_time), (gst_element_adjust_time):
add concept of "element time" and functions to get/set this time.
* gst/gstelement.c: (gst_element_change_state):
update element time correctly.
* gst/gstelement.c: (gst_element_get_compatible_pad_filtered):
This is a debug message, not a g_critical.
* gst/gstpad.c: (gst_pad_event_default):
handle discontinuous events right with element time.
* gst/gstscheduler.c: (gst_scheduler_state_transition):
update to clocking fixes.
set clocks on elements in READY=>PAUSED. The old behaviour caused
a wrong element time on the first element that started playing.
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_class_init):
* gst/schedulers/gstoptimalscheduler.c:
(gst_opt_scheduler_class_init):
remove code that just implements the default behaviour.
* gst/elements/gstfakesink.c: (gst_fakesink_chain):
update to use new clocking functions
* testsuite/clock/clock1.c: (gst_clock_debug), (main):
* testsuite/clock/clock2.c: (gst_clock_debug), (main):
update to test new element time.
* gst/autoplug/gstspideridentity.c: (gst_spider_identity_getcaps):
use _get_allowed_caps instead of _get_caps. This catches filtered
caps correctly.
* testsuite/debug/commandline.c:
update for new GST_DEBUG syntax.
* testsuite/threads/Makefile.am:
disable a test that only works sometimes.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_link_pads_filtered),
(gst_element_negotiate_pads): Fix to allow DELAYED to indicate
that linking was successful.
* gst/gstpad.c: (gst_pad_link_free),
(gst_pad_link_call_link_functions), (gst_pad_link_negotiate),
(gst_pad_link_try), (gst_pad_link_unnegotiate),
(gst_pad_unnegotiate), (gst_pad_set_explicit_caps): Pass
GstPadLinkReturn correctly between functions, and don't fail
when DELAYED is used (DELAYED is very important). Better
cleanup on unlinking and unnegotiation. Should fix some spider
bugs.
Original commit message from CVS:
2004-01-03 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/gstelement.c: (gst_element_class_add_pad_template):
Refuse registering a pad template if another pad template
with the same name already exists (#114715).
Original commit message from CVS:
Fix a few logic bugs in gst_element_get_compatible_pad_filtered() caused
by new pad negotiation. Add some debugging, and fix logic bug in gstpad.c.
Original commit message from CVS:
merge in tagging
Includes:
- gsttag.[ch] - The definition of GstTagList and tag registering/querying
- gsttaginterface.[ch] - Interface for elements that can handle setting of tags
- updates and merges to gststructure.[ch] and gstvalue.[ch]
- testsuite/tags - some tests for tagging
- bugfixes
- updates to make make distcheck work
- updates the version number to 0.7.2.1
Does not include:
- including tagging stuff in docs
- extensive tests
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- bytestream is out of the core again
- typefind element is now part of gstelements
Original commit message from CVS:
implement translatable error messages using gerror.
Includes bugfixes for:
- crash when unlinking Ghostpads
- make *_PAD_* macros use glib casts
- make spider typefinding merge buffers correctly
Original commit message from CVS:
Implement simple seek API. This can later be extended to work with GstPipeline as arguments and so on *autodetect proper element to send event to and so on), but this'll do as a start... See #116149
Original commit message from CVS:
GST_DEBUG reorganization
This is a big diff (ca 450k), containing loads of stuff:
- gstinfo.[ch] complete rewrite
- changing of all GST_DEBUG messages to reflect that change
- reorganization of subsystem disabling
- addition of gstconfig.h.in so we can track the disablings
- <gst/gst.h> does not include <unistd.h> and <config.h> anymore
- documentation updated for gstinfo stuff (build the docs yourself to know what changed)
- bugfixes for making of the docs (files from CVS are not deleted anymore
- testsuite for debugging changes in testsuite/debug
expect breakage
Original commit message from CVS:
- added GST_ELEMENT_ERROR flag to mark elements in error and to trap and
avoid recursive error loops.
- moved state change signal back to original place as it causes lockups.
Original commit message from CVS:
implement proper refcounting of pad's templates and references from real pads to their ghost pads and the other way around - this fixes the segfaults in the player
Original commit message from CVS:
- remove some \n in GstThread debugging
- move the state change g_cond_signal to the set_state function to make
sure that we don't unlock the waiters before we completed the state
change.
