When WPEBackend-fdo >= 1.3.0 is detected, the threaded view now relies on the
wpe_fdo_egl_exported_image API instead of the EGLImageKHR-based API which is
going to be deprecated in 2.26. The GLib sources created by the view now use the
default priority as well, the custom priority is no longer required.
Regression introduced by b4bdcf15b7
This commit prevents the handshake from reaching dtlsdec when
the receive state of the receive bin is set to DROP (for example
when transceivers are sendonly).
This preserves the intent of the commit, by blocking the bin
at its sinks until the receive state is no longer BLOCK, but
makes sure the handshake still goes through, by only dropping
data at the src pads, as was the case before.
The timestamp/PTS alone is meaningless without the segment and usually
applications care about the running-time or stream-time.
This also keeps the messages in sync with the spectrum and level
elements.
Header data must be forwarded to downstream, but if demux does not finish
to finding type (e.g., ts, mp4 and etc), this header data can be cleared
by _stream_clear_pending_data(). Moreover, although demux finish downloading
header data, still it has fragment date to be downloaded, fragment sequence
shouldn't be advanced yet at that moment.
https://bugzilla.gnome.org/show_bug.cgi?id=776928
Including gl.h from WPEThreadedView.h leads to GST_LEVEL_DEFAULT detected as
redefined. The proposed fix is to include config.h from the CPP implementation
file and disable gl.h inclusion in the header, by using forward declarations.
1. The spec indicates that the notification should occur near the end of
'setting the description' processing
2. The current location with the drop of the lock could cause the 'check
if negotiation is needed' logic to execute and become confused about
the state of the webrtcbin's current local descriptions.
In the bad case, the following assertions could be hit:
g_assert (trans->mline < gst_sdp_message_medias_len (webrtc->current_local_description->sdp));
g_assert (trans->mline < gst_sdp_message_medias_len (webrtc->current_remote_description->sdp));
Moving the signalling state change later in the set description task
means that checking for a renegotiation will early abort as the
signalling state is not STABLE before the session description and
transceivers have been updated.
The start of each segment is relative to the Period start, minus
the presentation time offset.
As specified in section 5.3.9.6 of the MPEG DASH specification:
The value of the @t attribute minus the value of the
@presentationTimeOffset specifies the MPD start time of
the first Segment in the series.
dashdemux was not taking account of presentationTimeOffset and in
some methods was not taking into account the Period start time.
This commit modifies the segment->start value to always be
relative to the MPD start time (zero for VOD,
availabilityStartTime for live streams). This makes all uses of
the segment list consistent.
Fixes#841
If both data channels become ready simultaneously, then the two integer
read-add-update cycles can execute concurrently and only ever increment
once instead of the required twice. Use an atomic add instead.
It is very possible for badly behaving signalling or peers to send
us ICE candidates before we receive an SDP. While we had consideration
for that on the first set SDP, subsequent SDP's could result in
misconfigured ICE transports. Expand the previous code to also take
into account reconfigurations.
Limitations:
- No transport changes at all (ICE, DTLS)
- Codec changes are untested and probably don't work
- Stream removal doesn't remove transports (i.e. non-bundled transports
will stay around until webrtcbin is shutdown)
- Unified Plan SDP only. No Plan-B support.
Currently, if one was to set -Dhls-crypto to either libgcrypt or openssl
instead of auto, the following lines would fail because hls_crypto_dep is not
yet set:
if not hls_crypto_dep.found() and ['auto', 'libgcrypt'].contains(hls_crypto)
if not hls_crypto_dep.found() and ['auto', 'openssl'].contains(hls_crypto)
Instead, change "if not hls_crypto_dep.found()" to "if not have_hls_crypto"
which fixes the error.
Use a timeout to limit that amount of time we wait after the compositor
for the initial configure event. Compositor are support to emit a
configure event before any wl_buffer can be attached. The problem is
that Weston strongly enforce this, while gnome-shell simply does not
emit such an event.
When buffer is used by compositor, we don't need attach it and hold one
more reference. Just check used_by_compositor, just return if it is true.
Assert error log is not need, this is normal behavior.
... when it has not yet been connected to.
Also, a condition variable is not a semaphore, so a lock/wait/unlock
sequence is inherently racy without any state checking. So switch to
a different lock and check the intended state.
Some GIR annotations were incorrect or even missing. The former isn't
good for bindings, while the latter is especially annoying for signal
handlers, as that means your arguments will get the wrong names in the
rendered documentation.
GST_VIDEO_BUFFER_FLAG_INTERLACED and GST_VIDEO_BUFFER_FLAG_TFF
flags are needed when processing SCTE 20 closed captions for an interlaced
stream, when we need to convert back to analog, in which case we need to match
the caption to the top or bottom field
... if (x265 version >= 1.9) requirement is satisfied.
The SEI messages were supported since x265 version 1.8
but there was API change from version 1.9
(contentLightLevelInfo was renamed to maxCLL and maxFALL)
This change makes it possible to create more than just 5 webrtc
data channels. The maximum number of data channels is exactly
DEFAULT_NUMBER_OF_SCTP_STREAMS / 2, therefore the limit is now
512.
Use proper API to flush libass events when we do
a flushing seek, and also do it in FLUSH_STOP
rather than FLUSH_START, so we can be sure
streaming has stopped.
Fixes seeking back in time.
Something seems to have changed in libass that
renders the old manual way of flushing events
ineffective and libass then seems to ignore
timestamps that are older than the ones last
seen then if we do it the old way.
Fixes#916
With latest XDG shell, we need to fait for the surface to have been
configured before we can attach a buffer to it. This is being enforce by
Weston with an error.
Fixes#933
Fixes the following error.
gstccconverter.c:677:7: error: variable 'len' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (flags & 0x40) {
^~~~~~~~~~~~
gstccconverter.c:698:10: note: uninitialized use occurs here
return len;
^~~
gstccconverter.c:677:3: note: remove the 'if' if its condition is always true
if (flags & 0x40) {
^~~~~~~~~~~~~~~~~~
gstccconverter.c:572:12: note: initialize the variable 'len' to silence this warning
guint len;
^
= 0
Prior to this, cccombiner stopped consuming video buffers when
data wasn't arriving on its caption pad. In a live situation,
when aggregator is timing out we should still output whatever
video buffers are present, even if no caption buffers can be
aggregated with them.
Since the addition of BUNDLE support, the pads and the transceivers
share a single transport stream. When getting stats from the stream,
filter by the ssrc of the current pad to avoid merging the stats for
different pads.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/889
It is necessary to implement this vmethod, as when the src pad
is marked as reconfigure, the base class will reset to src caps,
and the default update_src_caps simply queries the caps allowed
downstream without taking into account the caps set by
gst_aggregator_set_src_caps.
To make curlhttpsrc behave more like souphttpsrc, set the
BUFFER_OFFSET in its output buffers to match the segment
start. This means that in a HTTP RANGE request, the BUFFER_OFFSET
will match the value in the RANGE request.
To make it closer to a drop-in replacement for souphttpsrc,
expose the same gst_error_message_with_details as souphttpsrc,
so that applications can received the HTTP status code and reason
when an error occurs.
curlhttpsrc uses a single thread running the
gst_curl_http_src_curl_multi_loop() function to handle receiving
data and messages from libcurl. Each instance of curlhttpsrc adds
an entry into a queue in GstCurlHttpSrcMultiTaskContext and waits
for the multi_loop to perform the HTTP request.
Valgrind has shown up race conditions and memory leaks:
1. gst_curl_http_src_change_state() does not wait for the multi_loop
to complete before going to the NULL state, which means that
an instance of GstCurlHttpSrc can be released while
gst_curl_http_src_curl_multi_loop() still has a reference to it.
2. if multiple elements try to be removed from the queue at once,
only the last one is deleted.
3. source->caps is leaked
4. curl multi_handle is leaked
5. leak of curl_handle if URI not set
6. leak of http_headers when reusing element
7. null pointer dereference in negotiate caps
8. double-free of the default user-agent string
9. leak of multi_task_context.task
This commit changes the logic so that each element has a connection
status, which is used by the multi_loop to decide when to remove an
element from its queue. An instance of curlhttpsrc will not enter
the NULL state until its reference has been removed from the queue.
When shutting down the curl multi loop, the memory allocated from the
call to curl_multi_init() is now released.
When gstadaptivedemux uses a URI source element, it will re-use
it for multiple requests, moving it between READY and PLAYING
between each request. curlhttpsrc was leaking the http_headers
structure in this use case.
The gst_curl_http_src_negotiate_caps() function extracts the
"response-headers" field from the http_headers, but did not check
that this field might be NULL.
If the user-agent property is set, the global user-agent string
was freed. This caused a double-free error if the user-agent is
ever set a second time during the execution of the process.
There are situations within curlhttpsrc where the code needs
both the global multi_task_context mutex and the per-element
buffer_mutex. To avoid deadlocks, it is vital that the order in
which these are requested is always the same. This commit modifies
the locking order to always be in the order:
1. multi_task_context.task_rec_mutex
2. buffer_mutex
Fixes#876
Instead of creating a region, adding nothing to it, setting that as the
input region and destroying the region, you can instead just pass NULL
to wl_surface_set_input_region for the same effect.
Fixes#702
If bundle was used in combination with rtx, only the bundled transport
stream would have correctly configured rtx parameters.
Iterate over the payloads upfront in the bundled case to ensure the
correct payload mapping is set for the RTX elements.
With refactoring, supporting passphrase was removed accidently.
This commit re-enables srt encryption and validates 'passphrase'
by checking the return value of 'srt_setsockopt'.
fix: #694
Fix following build error
../subprojects/gst-plugins-bad/ext/openh264/gstopenh264dec.cpp(76): error C2121:
Note that msvc usually complains #if inside macro
gstladspa.c:360:5: error: zero-length ms_printf format string [-Werror=format-zero-length]
vad_private.c:108:3: error: this decimal constant is unsigned only in ISO C90 [-Werror]
gstdecklinkvideosink.cpp:478:32: error: comparison between 'BMDTimecodeFormat {aka enum _BMDTimecodeFormat}' and 'enum GstDecklinkTimecodeFormat' [-Werror=enum-compare]
win/DeckLinkAPI_i.c:72:8: error: extra tokens at end of #endif directive [-Werror]
win/DeckLinkAPIDispatch.cpp:35:10: error: unused variable 'res' [-Werror=unused-variable]
gstwasapiutil.c:733:3: error: format '%x' expects argument of type 'unsigned int', but argument 8 has type 'DWORD' [-Werror=format]
gstwasapiutil.c:733:3: error: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'guint64' [-Werror=format]
kshelpers.c:446:3: error: missing braces around initializer [-Werror=missing-braces]
kshelpers.c:446:3: error: (near initialization for 'known_property_sets[0].guid.Data4') [-Werror=missing-braces]
Replace legacy usage of DecodeFrame2 API in favour of the
recommended DecodeFrameNoDelay()
This fixes problems with DecodeFrame2() not (currently) returning
all frames in main/high streams with B-frames, and reduces latency -
previously openh264 would not return a decoded frame until the next
call to DecodeFrame2(). DecodeFrameNoDelay() returns them immediately.
If the last frame(s) produce errors, then we need to drop them
or else we spin forever failing to decode a frame and thinking
it'll get better if we wait for more data that's never coming.
The fdkaac decoder supports 6.1 / 7.1 channels with downmixer
since v0.1.4. Old versions can use AAC_PCM_OUTPUT_CHANNELS
instead of AAC_PCM_MAX_OUTPUT_CHANNELS.
Fixes#873
This is the equivalent of iceTransportPolicy in the RTCConfiguration
dictionary.
Only two values are implemented:
* all: default behaviour
* relay: only gather relay candidates
The third member of the iceTransportPolicy enum, "public", is
obsolete.
0a350c610d broke the build by only
building enum types with meson. It also removed gstsrt.c from the list
of sources, causing the plugin to fail to load.
squash! srt: Fix autotools build
gstsrtobject.c: In function ‘gst_srt_object_close’:
gstsrtobject.c:1036:7: error: function called through a non-compatible type [-Werror]
(GDestroyNotify) g_closure_unref);
/usr/include/glib-2.0/glib/gmem.h:121:8: note: in definition of macro ‘g_clear_pointer’
(destroy) (_ptr); \
^~~~~~~
gstsrtobject.c:1038:7: error: function called through a non-compatible type [-Werror]
(GDestroyNotify) g_closure_unref);
/usr/include/glib-2.0/glib/gmem.h:121:8: note: in definition of macro ‘g_clear_pointer’
(destroy) (_ptr); \
^~~~~~~
Arch Linux
gcc 8.2.1 20181127
glib 2.58.2
We have srt{client,server}{src,sink} elements in accordance to the
norm of the connection oriented protocols. However, SRT connection
mode can be changed by uri parameters so it requires an integrated
element to handle the parameters.
fix: #740
