Set the output caps on the srcpad before pushing the buffer because else core
will do a rather expensive check to see if we can actually accept those caps on
the srcpad.
Install a custom acceptcaps function instead of using the default expensive
check. We accept whatever downstream accepts so we pass along the acceptcaps
call to the downstream peer.
I also renamed glib_enum_prefix to glib_gen_prefix as we also use that for the
marshallers. Also rename the rtsp-marshal.list to work with the unified prefix.
instead of printing an error that no corresponding group could
be found. no-more-pads from non-demuxer elements doesn't give
any additional information because there can only be a single srcpad.
Fixes bug #598288.
This allows partial group changes, i.e. demuxer2 in the example below
goes EOS but has a next group and audio2 stays the same.
/-- >demuxer2---->video
demuxer--- \--->audio1
\--->audio2
This now keeps track of everything that is going on, creates
a tree of chains and groups to allow "demuxer after demuxer" scenarios
and allows chained Oggs with multiple streams (needs oggdemux or playbin2 fixes).
Also document everything in detail and give a general overview of what
decodebin2 is doing at the top of the sources.
Fixes bug #596183, #563828 and #591677.
Pad blocks should never be done on external pads as outside elements
might want to use their own pad blocks on them and this will lead to
conflicts and deadlocks.
This allows using playsink from outside the playback plugin.
Add code to be able to request the sink pads using standard GStreamer API.
TODO : expose GObject properties/signals.
g_value_set_object() increases the refcount of the sink, which is not needed
because the object should already be refcounted. Make sure this is always the
case and use g_value_take_object().
Fixes: #592884
Before, SEEK events would be sent to the video sink, which wouldn't
be linked in any way to the subtitle part of the pipeline and
subparse would never see the SEEK event. This would then seek
the audio/video but the subtitles would continue from the old
position instead.
Fixes bug #591664.
The problem with an error message is, that it will stop playback completely
while it could be that only a audio decoder plugin is missing and the video
could be played with the available plugins.
See bug #591677.
Before we had STREAM/WRONG_TYPE but it's really CORE/MISSING_PLUGIN
because a plugin is missing and nothing else is wrong.
Also make it an error instead of a warning.
Really fixes bug #591677.
Don't do fallbacks if application specified a sink element. When doing the
fallback use configured default elements instead of hardcoded linux only
elements. Improve error messages accordingly.
If a downstream element returns an error while upstream has already
put all data into queue2 (including EOS), upstream will no longer
chain into queue2, so it is up to queue2 to perform some
EOS handling / message posting in such cases. See #589991.
Rename the GType of the pads of playbin's internal stream selector
element so they don't use the same type name as input-selector's
pads. Fixes#589622.
Keep track of the max requested position and compare this to the write position
in the temp file to get the current amount of buffered data.
Fix memleak of all incomming buffers.
Fixes#588551
We shouldn't really depend on elements from -bad for stream
selection in playbin2, so use a private copy of input-selector
until the selector plugin is ready to be moved to -base or -good.
Fixes#586356.
Don't flush the file by closing and opening it but instead use g_freopen. This
avoids a deadlock in shutdown because we emit the temp-location property change
with the wrong lock held.
Fix the construction of the temporary filename construction as the application
name can be NULL and we don't want a separator between the prgname and the
template.
Add a download property that will attempt to configure queue2 into progressive
download buffering.
Make sure we only enable download buffering for quicktime and flv formats.
Add a new temp-template property so that queue2 can securely allocate a
temporary filename. Deprecate the temp-location property for setting the
location but still use it to notify the allocated temp file.
If READY->PAUSED failed in the source element we would've swapped
the current and next group already. To allow READY->PAUSED to succeed
after the first failure we have to swap the current and next group
back again. This also ensure that we're again in the same state
as before the failed state change and not at the next group.
This was especially a problem for playbin2 pipelines that use the
new mounting support in giosrc as the source would fail for READY->PAUSED
the first time, the application mounts the location and then tries
to go READY->PAUSED again (and this time it would succeed).
Fixes bug #588078.
Set the target state of the newly added uridecodebins to somthing else that
PAUSED so that we keep their state in sync with the playsink state.
Fixes#585268
uridecodebin expects the passed connection-speed value in kbps, so we
need to divide the value stored in bps by 1000. Also, lower the upper
limit on the properties to the value that we can actually store in our
internal guint (which is plenty high enough)
When we are probing for streams, we want to set the queue size in such a way
that we can scan a maximum amount of data without consuming too much memory.
Therefore, remove the time limit on the queue and only stop scanning after 2MB
of data.
See #584104.
Recognise PGS subpicture streams and connect them to the SPU pad
in playsink. Unfortunately this fails badly with negotiation errors
if the SPU is not recent enough to support the stream. I'm not sure
how to add format negotiation in yet.
When using an audio sink without a "volume" property, volume control
would only work for the first song. For the next song, we'd try to
re-use the existing audio chain, but inadvertently set chain->volume
to NULL instead of to the existing volume element.
playbin2 inadvertently used autoaudiosink and autovideosink up to now,
since it would overwrite the sinks configured via the "audio-sink"
and "video-sink" properties with the stream-specific group sinks when
configuring the outputs. Those are usually NULL however, so that would
overwrite the configured sinks with NULL which makes playbin2 then
default to the auto sinks. Fix this by keeping a reference to each
configured sink in playbin2 and setting up the right sinks depending
on whether there is a stream-specific sink or not.
Fixes#584020.
Use two flags to remember volume/mute changes at times when we don't have the
audiochain yet (e.g. construction). Only set values when they were actualy
changed. This makes pulseaudio's stream restore functional.
Add a queue2 after the raw output pads of certain sources such as those for uris
like cdda://
No tuning of the queue is done yet as the defaults seem to work fine for me.
Fixes#582528
Keep track of the autoplugged custom sinks and configure them in the playsink
element when we have collected all streams.
Also make sure that we only select one custom sink.
When unreffing the internal sink, we don't need to change the state to NULL.
Make playsink go async to the PAUSED state instead of relying on uridecodebin
for async behaviour in playbin. This solves some problems (mainly with DVD)
where the pipeline would go to PLAYING before preroll completed, failing to
select the audiosink clock.
Fixes#581727
The 2s limit is way too small for a lot of files (which have an interleave
in time of between 3 and 5s). Instead, leave it to the initial 5s value
and reduce the other limits (allowing us to stay memory-efficient).
First check the pad caps if they are raw before setting the raw_decoding_mode to
TRUE. Fixes playback of transport streams and other streams that require large
queues.
Fixes#579734
Clear the target of our ghostpads before we remove the pad from the element.
This to make sure that the internal pad is not left linked to whatever pad we
were ghosted to. This should only be a problem when we leak the ghostpads.
Also release our subpicture pads.
Fixes#577288.
Raw decoding mode removes almost all buffering in video and audio queues
when a source providing already decoded video/audio is detected, on the
possibly bogus assumption that such a source should provide sufficient
internal queueing. Fixes playback on some DVDs, and improves it
on all.
When reusing playbin with visualisations, reset the async property on the video
sink because some sinks might dynamically recreate their sinks.
Fixes#576188
When we have the textpad configured, enable and disable the subtitles by setting
the silent flag on the overlay element instead of trying to remove elements.
See #576187
Link after doing the state change and unlink before shutting down. Makes the
window for causing races in toggling the visualisations smaller.
See #576187.
Remove the group GCond that we used for waiting for groups to finish because we
use pad blocking on the selectors and counters instead for waiting for the
groups to complete.
remove the obsolete about_to_finish variable set while emiting the
about-to-finish signal and fix some old comments.
We don't need to take the playbin lock when querying the uridecodebin.
When we make a group connected to a demuxer, keep an extra dynamic refcount for
the group which is only decremented when no_more_pads or a multiqueue overrun is
detected. This way we avoid a race between exposing the group while more dynamic
refs are added from new pads.
Fixes#575588.
Sync the state of the newly added chains to the state of the parent sink element
to avoid lost async-start messages. Fixes cdda:// async-done message storm.
When streams are not selected in the selector, return NOT_LINKED so that
upstream elements can skip decoding. Only do this for audio and video pads
because for text streams the overhead is smaller and they could come from
external files.
Set the custom sink async=FALSE to not make it participate in preroll because we
are dealing with sparse streams.
Try to set sync=TRUE on the custom text sink.
Release the shutdown lock when we wait for other groups to complete or else we
have a deadlock when the other group completes and tries to grab the shutdown
lock.
Fixes#575550.
Add property to playbin2 to configure a custom sink that receives the raw
subtitle buffers instead of using a textoverlay.
Improve the property finding code to make it more usable.
Use property find code to find async properties in custom sinks that are bins.
Improve text overlay code to gracefully handle missing elements.
Disconnect the notify::caps signal in our callback (it'll be re-added
if we're not, in fact, finished getting complete caps). Ensures that
caps changes mid-stream (e.g. from an mp3 that changes from
stereo->mono mid-file) don't cause us to try to add a new pad.
Make it possible to request a flushing pad from the playsink. We can eventually
use these flushing pads to quickly terminate the dataflow when we are shutting
down.
Release the group lock while we perform the state changes on the uridecodebins
because that might trigger callbacks that we need to handle with the group lock
taken. Avoids a possible deadly embrace in some id3/flac files.
Fixes#567396.
Rather than only checking for volume property on the audio sink
directly, recursively look for it on sinks within it (if it's a bin).
Allows use of sink-as-volume-control where the application has supplied
an audio-sink bin that includes a real audio sink internally.
Don't keep extra references to volume and mute elements; we don't need
to do so.
Ensure we unref pads that we have references to, and release request
pads.
We can use gst_element_link_pads() instead of the more generic
gst_element_link() function because we know the pads. This saves some cycles
because the more generic function needs to search for possible compatible caps
etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(gst_play_bin_set_uri), (gst_play_bin_set_suburi),
(no_more_pads_cb), (drained_cb), (group_set_locked_state_unlocked),
(activate_group), (deactivate_group), (groups_set_locked_state),
(gst_play_bin_change_state):
Fix some comments and docs.
Post an error message when we fail to link the selector to the sink.
Remove pushing of EOS, this seems unneeded.
Lock the state of deactivated groups so that they don't accidentally
reactivate when the playbin2 state changes.
Reuse uridecodebins.
Unlock and relock state of groups when playbin goes to NULL.
Fixes#566654.
Fixes#566341.
* gst/playback/gsturidecodebin.c: (pad_removed_cb), (type_found):
Only do something in the pad removed callback when we are dealing with
our sourcepads because the sinkpads don't have a ghostpad.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (notify_source_cb), (activate_group):
Disconnect signal handlers before destroying a previous decodebin so
that we don't end up causing deadlocks. Fixes#566586.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (no_more_pads_cb):
Add some debug info.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gst_play_sink_reconfigure), (gst_play_sink_request_pad),
(gst_play_sink_release_pad):
Add some more debug info.
Reconfigure the audio chain when we switch between raw and encoded audio
in gapless playback.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_finalize):
Free the factory array when finalizing.
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_base_init):
Use a GstStaticPadTemplate since the src pad caps are fixed.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain),
(gst_play_sink_reconfigure):
Add some more debug info.
Fix linking of just an encoded sink.
Handle failure to create a sink chain more gracefully than crashing.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (pad_added_cb):
Error out with a missing-plugin error when the input-selector was not
found.
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Indentation.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gst_play_sink_dispose), (gst_play_sink_finalize), (try_element),
(gen_video_chain), (gen_audio_chain), (gst_play_sink_reconfigure),
(gst_play_sink_send_event), (gst_play_sink_change_state):
Use G_DEFINE_TYPE.
Try to set the selected sink to READY before using it. This will allow
for detection of incompatible formats sooner.
Don't cause a fatal error when conversion elements are missing but post
a missing-element message and a warning instead because things might
still link and run fine.
Simplyfy the construction of audio and video sink chains.
Original commit message from CVS:
* gst/playback/gstdecodebin.c:
* gst/playback/gstdecodebin2.c:
Add basic docs to decodebin and link to decodebin from decodebin2.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
Add notification of current stream. Add ability to configure buffer
sizes.
* gst/playback/gsturidecodebin.c:
Add ability to configure buffer sizes for streaming mode.
Bug #561734.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain):
Don't post an error when we can't configure the volume but post a
warning instead. Fixes#561780.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
If the top-level type of the stream is plain text, don't try to decode
it, matching behaviour of decodebin.
* gst/playback/gstplaysink.c:
If we fail to generate a text chain (e.g. due to missing optional
plugins), don't crash.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (deactivate_group):
don't try to unlink the selector sinkpad when we don't have it yet. This
can happen if an error occured before the group was complete.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (activate_group):
Catch state change errors and stop from the uridecodebin elements
instead of trying to continue in vain.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Don't try to do crazy things when we only have a text pad without a
video pad. Fixes#559478.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_pad_activate):
Remove bogus assert, the decodepad could have been created inside an
already existing group.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (expose_pad): Fix typo: unset
target instead of setting it.
(gst_decode_pad_activate, gst_decode_pad_unblock): This is now the
API for a decode pad. The bugfix is that we set the group in
activate(), not when the pad was created because it might be NULL
then.
(gst_decode_group_control_source_pad, gst_decode_group_expose):
Update to use the API.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (struct _GstDecodePad): Change to
be a subclass of GstGhostPad.
(analyze_new_pad): So, when emitting the signals that determine
how we do autoplugging, already create the ghost pad and use it as
the pad in the signal arguments. This allows applications to make
a connection between the pad passed in e.g. autoplug-continue, and
the pad passed in new-decoded-pad.
(connect_pad, expose_pad): Update to receive the ghosted decode
pad in the args, retargetting it as necessary if we have to plug
the target pad through a multiqueue.
(gst_decode_group_control_source_pad): Adapt to receive an
already-ghosted pad that just needs activation, blocking, and
drain notification.
(sort_end_pads): Adapt for decode pads actually being pads.
(gst_decode_group_expose): Adapt for decode pads actually being
pads. Rewrite the decode pad names so they appear in order. Adds a
new error case if we couldn't set the name.
(gst_decode_group_free, gst_decode_group_hide): Adapt cleanup
logic.
(gst_decode_pad_set_blocked, gst_decode_pad_add_drained_check):
New API for the decode pad, needed because we shouldn't do these
things inside gst_decode_pad_new(), but after.
(gst_decode_pad_new): Change to actually make the real pad, and
delay the blocking/drainage bits.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (selector_blocked), (pad_added_cb),
(no_more_pads_cb):
Fix nasty race where multiple decodebins could start pushing data before
we manage to configure the sinks, resulting in not-linked errors in
typical RTSP streaming cases.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Fix property doc markup (its not a signal).
* sys/xvimage/xvimagesink.c:
Add since tag for new proeprties (also add sice tags fro the last two
other additions).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c:
* gst/playback/gststreamselector.c:
First stab at integrating DVD subpicture overlay into
playbin. Successfully plugs and plays, but the queues need
shrinking - 3 seconds of video is too much buffering.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
And ref the pad before returning it again when linking to the queue
failed. Otherwise we will unref the pad twice later and things break.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
If linking the raw pad with a queue fails, try it without a queue
instead of failing completely. This should never happen.
Original commit message from CVS:
Patch by: Evgeniy Stepanov <eugeni dot stepanov at gmail dot com>
* gst/playback/gstdecodebin.c: (add_raw_queue), (close_pad_link):
Add a queue after a demuxer if the demuxer outputs raw data. This was
done before only for non-raw data but is required in this case too.
Fixes bug #540215.
decodebin2 doesn't have this issue because all streams of a group
go through multiqueue.
Original commit message from CVS:
* gst/playback/gstplay-marshal.list:
* gst/playback/gstplaybin2.c:
Add get-video-pad, get-audio-pad, get-text-pad action signals to
playbin2. This allows the user to get to the selector's sinkpads, and
thus inspect a range of things - caps, tags, etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
* gst/playback/gstplaysink.c:
Fix a whole bunch of typos in comments and log statements.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
Ensure decodebin2 emits 'drained' signal once, and only once, when all
pads are drained.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_get_property),
(notify_source), (activate_group):
Implement the source property, emit notify when it changes in the
underlying uridecodebin.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Disconnect signals from decodebins we created before we remove it from
playbin, to avoid crashes if the decodebin is eventually disposed after
the playbin itself (possible if the app takes a reference on the
decodebin).
Fixes#536521.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_group_control_source_pad), (gst_decode_group_expose):
Check for NULL cases and log them, creating ghostpads can, for example,
fail when the pad returns wrong caps.
* gst/playback/gstplaybin2.c: (perform_eos):
When pushing out the EOS event, collect the return value and warn when
something failed.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/playback/gstdecodebin.c: (remove_fakesink):
Lock the fakesink before setting the state to NULL and removing it from
the bin so that a concurrent state change cannot interfere.
Fixes#534331.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_class_init):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init):
* gst/playback/gstplay-marshal.list:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_class_init):
Use correct marshallers. GstCaps are a boxed type and no GObject
subclass.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (connect_pad):
When autoplugging fails, set the element back to NULL before
unreffing it.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (set_audio_mute),
(set_active_source):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(playbin_set_audio_mute):
Allow setting -1 as current-audio to mute the current audio stream,
similar to what is done for subtitles. Fixes bug #342294.
Original commit message from CVS:
* gst/playback/test4.c:
* gst/playback/test5.c:
* gst/playback/test6.c:
* gst/playback/test7.c:
Also include config.h when relying on defines from it. Fixes the
build. Its been a please to serve :)
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (free_pad_probe_for_element),
(try_to_link_1):
If we can't activate one of the decoders we plugged in (such as,
say, musepackdec) for some reason (it might not support push mode,
for example), remove any pad probes that close_pad_link() might
have set up. This makes sure we later don't try to remove a probe
for a pad that doesn't exist any longer, and avoids nast warnings
and probably other things too.
Original commit message from CVS:
* gst/playback/test4.c:
* gst/playback/test5.c:
* gst/playback/test6.c:
* gst/tcp/gstmultifdsink.c:
Include stdlib.h and unistd.h only if the appropriate HAVE_*_H macro
is defined.
Original commit message from CVS:
* docs/design/draft-keyframe-force.txt:
Fix typo.
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_handle_src_query):
Set buffering mode in the messages.
Set buffering percent in the query.
* tests/examples/seek/seek.c: (update_fill), (msg_state_changed),
(do_stream_buffering), (do_download_buffering), (msg_buffering):
Do some more fancy things based on the buffering method in use.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_close_temp_location_file), (gst_queue_handle_src_query),
(gst_queue_src_checkgetrange_function):
Include extra buffering stats in the buffering message.
Implement BUFFERING query.
* gst/playback/gsturidecodebin.c: (do_async_start),
(do_async_done), (type_found), (setup_streaming), (setup_source),
(gst_uri_decode_bin_change_state):
Only add decodebin2 when the type is found in streaming mode.
Make uridecodebin async to PAUSED even when we don't have decodebin2
added yet.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
* gst/playback/gstplayback.c: (plugin_init):
* gst/volume/gstvolume.c: (plugin_init):
Work around missing bits of thread-safety on older GLibs some
more to avoid assertions when starting up multiple playbin
objects concurrently (see #512382).
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_init), (gst_decode_bin_dispose),
(gst_decode_bin_set_sink_caps), (gst_decode_bin_get_sink_caps),
(gst_decode_bin_set_property), (gst_decode_bin_get_property),
(analyze_new_pad), (connect_pad), (expose_pad),
(gst_decode_group_new), (gst_decode_group_control_demuxer_pad),
(gst_decode_group_expose), (gst_decode_group_free),
(do_async_start), (do_async_done), (gst_decode_bin_change_state):
Remove fakesink hack, we can now implement this more elegantly.
Added property to bypass typefinding.
Removed underrun callback and demuxer pad probe, we now use the srcpad
probe to expose groups.
API::sink-caps property
* gst/playback/gstplaybin2.c: (no_more_pads_cb):
Guard against multiple emissions of the no_more_pads signal, which
happens when we are dealing with chained oggs.
* gst/playback/gsturidecodebin.c: (remove_decoders),
(make_decoder), (type_found), (setup_streaming), (source_new_pad),
(setup_source):
For streams, use our own typefind element and plug our queue after it.
We will need this to determine the type of buffering to use for the
queue soon.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_out_rates),
(gst_queue_open_temp_location_file),
(gst_queue_close_temp_location_file), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_set_property):
Update the estimated input data when we push out a buffer.
Add some debug info about the temp file.
Only forward src events when we are not using a temp file.
Don't block the duration query, we need to find something better.
Don't leak the temp filename.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_is_filled):
The queue is never filled when there are no buffers in the queue at all.
Fixes#523993.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(init_group), (free_group), (gst_play_bin_init),
(gst_play_bin_finalize), (gst_play_bin_set_uri),
(gst_play_bin_set_suburi), (gst_play_bin_get_video_tags),
(gst_play_bin_get_audio_tags), (gst_play_bin_get_text_tags),
(gst_play_bin_set_current_video_stream),
(gst_play_bin_set_current_audio_stream),
(gst_play_bin_set_current_text_stream),
(gst_play_bin_set_encoding), (gst_play_bin_set_property),
(gst_play_bin_get_property), (pad_added_cb), (pad_removed_cb),
(no_more_pads_cb), (perform_eos), (autoplug_select_cb),
(activate_group), (deactivate_group), (setup_next_source),
(save_current_group), (gst_play_bin_change_state):
Update some docs.
Add new locks and conds to protect pipeline creation and group
switching.
Implement the sub-uri property.
Keep track of pending uridecodebin creation and configure the output
pipeline after all streams are configured.
Propagate subtitle encoding to the uridecodebins.
Implement getting the video/audio/visualisation elements.
Use input-selector for stream switching.
If we are asked to do visualisation, prefer to autoplug raw sinks
instead of sinks that accept encoded data.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gst_play_sink_init), (gst_play_sink_dispose),
(gst_play_sink_set_video_sink), (gst_play_sink_get_video_sink),
(gst_play_sink_set_audio_sink), (gst_play_sink_get_audio_sink),
(gst_play_sink_vis_unblocked), (gst_play_sink_vis_blocked),
(gst_play_sink_set_vis_plugin), (gst_play_sink_get_vis_plugin),
(gst_play_sink_set_volume), (gst_play_sink_get_volume),
(gst_play_sink_set_mute), (gen_video_chain), (gen_text_chain),
(gen_audio_chain), (gen_vis_chain), (gst_play_sink_reconfigure),
(gst_play_sink_set_font_desc), (gst_play_sink_get_font_desc),
(gst_play_sink_send_event_to_sink), (gst_play_sink_change_state):
* gst/playback/gstplaysink.h:
Add methods to get audio/video/vis elements.
Add methods to set the font description for the overlay.
Remove properties, we're using this element with its methods only.
Add support for subtitles.
Rearrange the locking a bit to not use the object lock for protecting
the pipeline construction.
Try to use the volume and mute property on the sink when its available.
Implement the mute option with volume when the sink does not have a mute
property.
Only add volume element when the sink has no volume property.
Only do visualisations with raw audio pads.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c:
(gst_uri_decode_bin_autoplug_factories),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_encoding),
(gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (no_more_pads_full),
(new_decoded_pad_cb), (gen_source_element), (remove_decoders),
(proxy_autoplug_factories_signal), (make_decoder),
(source_new_pad), (setup_source):
Add a readonly source property and notify.
Add new lock for protecting the construction of the pipeline.
Keep track of the decodebins we plugged.
Correctly proxy the autoplug signal so that it actually continues.
Proxy subtitle-encoding to the decodebins.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose),
(gst_decode_bin_set_caps), (gst_decode_bin_get_caps),
(gst_decode_bin_set_subs_encoding),
(gst_decode_bin_get_subs_encoding),
(gst_decode_bin_autoplug_factories), (connect_pad), (are_raw_caps),
(deactivate_free_recursive):
Protect caps property with the object lock.
Protect encoding property with the object lock.
Keep list of elements we added that have the subtitle-encoding property.
Distribute the subtitle-encoding to all of the elements when it
changes.
Original commit message from CVS:
* gst/playback/gststreamselector.c: (gst_selector_pad_event),
(gst_selector_pad_chain):
* gst/playback/gststreamselector.h:
Revert change that caused regression until a real fix is found.
Fixes#522203.
Original commit message from CVS:
Patch by: José Alburquerque <jaalburqu svn gnome org>
* gst/playback/gstplaybin2.c:
Make the function signature of the _get_*_tags() functions match
the signature of the vfuncs they implement, ie. return a
GstTagList rather than a GstStructure, which is more correct,
even if one is typedef'ed to the other (#518940).
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_set_property):
Enable vis setting.
* gst/playback/gstplaysink.c: (gst_play_sink_init),
(gst_play_sink_dispose), (gst_play_sink_vis_unblocked),
(gst_play_sink_vis_blocked), (gst_play_sink_set_vis_plugin),
(gen_vis_chain):
Implement vis switching while playing.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (find_property),
(gst_play_sink_find_property), (gen_video_chain),
(gst_play_sink_reconfigure), (gst_play_sink_get_last_frame):
Recursively search the sink element for a last-frame property so that we
can also find the property in autovideosink and friends that don't
always proxy the internal sink properties.
Original commit message from CVS:
* gst/playback/gstscreenshot.c:
* gst/playback/gstscreenshot.h:
Fix up copyright (I rewrote the GStreamer-0.10 code for
this from scratch back in the days).
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstscreenshot.c: (feed_fakesrc), (save_result),
(create_element), (gst_play_frame_conv_convert):
* gst/playback/gstscreenshot.h:
Add screenshot conversion code from totem.
* gst/playback/gstplay-marshal.list:
* gst/playback/gstplaybin2.c: (gst_play_marshal_BUFFER__BOXED),
(gst_play_bin_class_init), (gst_play_bin_convert_frame),
(gst_play_bin_get_property), (no_more_pads_cb), (activate_group):
Implement frame property to get a color-unconverted snapshot.
Implement convert-frame action signal to get a converted snapshot image.
Configure connection speed in uridecodebin.
Document some more properties.
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gen_video_chain), (gen_audio_chain), (gst_play_sink_reconfigure),
(gst_play_sink_get_last_frame):
* gst/playback/gstplaysink.h:
Use last-buffer property of the video sink to get a video snapshot.
* tests/examples/seek/seek.c: (shot_cb), (main):
Add snapshot button for playbin2 and use the frame property to save the
frame as a png in the current directory.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (pad_added_cb), (pad_removed_cb),
(no_more_pads_cb):
Get the object data correct so that we can remove our channels
correctly.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gen_vis_chain), (gst_play_sink_reconfigure),
(gst_play_sink_request_pad):
Add option to disable async behaviour in the sinks when possible. This
makes it possible to avoid an audio queue when dealing with
visualisations.
Add option to add a queue for the audio path.
* tests/examples/seek/seek.c: (clear_streams), (update_streams),
(main):
Disable the vis checkbox to match the defaults of playbin2.
Only get the stream info when we need to.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_set_mute),
(gst_play_sink_get_mute), (gen_video_chain), (gen_audio_chain),
(gen_vis_chain), (gst_play_sink_reconfigure),
(gst_play_sink_request_pad):
Move tee in front of the audio and vis pipelines.
Add queue for audio for now.
Add visualisation support.
* tests/examples/seek/seek.c: (main):
Visualisation is by default disabled.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_audio_element):
* gst/playback/gstplaysink.c: (gen_audio_chain):
Handle case where we can't create the volume element a bit
better (#514307).
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Set is_dynamic as True if there are elements with both request
and sometimes src pad templates instead of breaking out when it
finds the first pad template that is a src.
Original commit message from CVS:
* gst/playback/gstplay-marshal.list:
Added marshal for streamselector Tags.
* gst/playback/gstplaybasebin.c: (set_active_source):
Streamselector now selects pads based on the pad object instead of its
name.
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(init_group), (gst_play_bin_init), (get_group), (get_tags),
(gst_play_bin_get_video_tags), (gst_play_bin_get_audio_tags),
(gst_play_bin_get_text_tags),
(gst_play_bin_set_current_video_stream),
(gst_play_bin_set_current_audio_stream),
(gst_play_bin_set_current_text_stream),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(pad_added_cb), (pad_removed_cb), (autoplug_select_cb):
Remove option to mute streams with the current-a/v/t property, we have
this functionality in the flags.
Add signals to notify when the number of A/V/T channels changed.
Add action signals to get tags for the A/V/T streams.
Implement setting the current A/V/T stream.
Rearrange some things to simplify stream selection.
Implement volume.
* gst/playback/gstplaysink.c: (gst_play_sink_set_volume),
(gst_play_sink_get_volume), (gst_play_sink_set_property),
(gst_play_sink_get_property), (gen_video_chain), (gen_audio_chain),
(activate_vis), (gst_play_sink_reconfigure):
* gst/playback/gstplaysink.h:
Add and implement volume setting methods.
* gst/playback/gststreamselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_finalize), (gst_selector_pad_get_property),
(gst_selector_pad_event), (gst_stream_selector_class_init),
(gst_stream_selector_init), (gst_stream_selector_finalize),
(gst_stream_selector_set_property),
(gst_stream_selector_get_property),
(gst_stream_selector_get_linked_pad),
(gst_stream_selector_request_new_pad):
* gst/playback/gststreamselector.h:
Add pad properties for tags and status of pads.
Keep tags on pads.
Make active pad selection based on pad object instead of name.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(get_group), (get_n_pads), (gst_play_bin_get_property),
(pad_added_cb), (no_more_pads_cb), (perform_eos),
(autoplug_select_cb), (deactivate_group):
Remove stream-info, we going for something easier.
Refactor getting the current group.
Implement getting the number of audio/video/text streams.
* gst/playback/gststreamselector.c:
(gst_stream_selector_class_init), (gst_stream_selector_init),
(gst_stream_selector_get_property),
(gst_stream_selector_request_new_pad),
(gst_stream_selector_release_pad):
* gst/playback/gststreamselector.h:
Add property for number of pads.
* tests/examples/seek/seek.c: (set_scale), (update_flag),
(vis_toggle_cb), (audio_toggle_cb), (video_toggle_cb),
(text_toggle_cb), (update_streams), (msg_async_done),
(msg_state_changed), (main):
Block slider callback when updating the slider position.
Add gui elements for controlling playbin2.
Add callback for async_done that updates position/duration.
